Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical...

52
www.SimtechUSA.com Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data

Transcript of Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical...

Page 1: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

www.SimtechUSA.com

Corrosion Resistant Fluid and Air Handling Systems.

Chemical ProcessPiping Systems

Polypropylene Butt Fusion Dimensional Data

Page 2: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

TaBlE oF ConTEnTS

Pn10 / SDR 11

Pipe.............................................................................................................................................5

Butt Weld Fittings Adapters: Female ................................................................................................................. 27Adapters: Male ..................................................................................................................... 26Backing Rings ....................................................................................................................... 21Caps: Dome .......................................................................................................................... 23 Caps: Flat ............................................................................................................................. 22Elbows: 90° ............................................................................................................................ 6Elbow: 90° - Extended ........................................................................................................... 7Elbow: 45° - Extended ....... ................................................................................................... 8Lateral: 45° ........................................................................................................................... 24Lateral: 60° ........................................................................................................................... 25Reducer: Concentric ........................................................................................................13-15Reducer: Concentric - Extended ......................................................................................16-17Reducer: Eccentric - Extended ............................................................................................. 18Stub Ends ............................................................................................................................. 19Stub Ends - Extended ........................................................................................................... 20Tee ......................................................................................................................................... 9Tee: Reduced ........................................................................................................................ 10Tee - Extended .................................................................................................................... 11Tee: Reduced - Extended ...................................................................................................... 12Union: EPDM ...................................................................................................................... 28Union: VITON ..................................................................................................................... 29

Page 3: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�1.05�609

ChemicalProcess Piping Systems - Dimensional Data

Pn6 / SDR 17.6

Pipe.............................................................................................................................................31

Butt Weld Fittings Backing Rings ....................................................................................................................... 41Caps: Dome .......................................................................................................................... 42Caps: Flat ............................................................................................................................. 43Elbows: 90° .......................................................................................................................... 32Elbow: 90° - Extended ......................................................................................................... 33Elbow: 45° - Extended ....... ................................................................................................. 34Lateral: 45° ........................................................................................................................... 44Lateral: 60° ........................................................................................................................... 45Reducer: Concentric ........................................................................................................37-39Stub Ends ............................................................................................................................. 40Tee ....................................................................................................................................... 35Tee: Reduced ........................................................................................................................ 36

Pn3.2 / SDR 33

Pipe.............................................................................................................................................47

Butt Weld Fittings Backing Rings ....................................................................................................................... 51Elbows: 90° .......................................................................................................................... 48Stub Ends ............................................................................................................................. 50Tee ....................................................................................................................................... 49

Page 4: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

150psi Dimensional Data

Page 5: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

51.05�609

ChemicalProcess Piping Systems - Dimensional Data

PRESSURE PIPE

Description: Pressure Pipe PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Extruded, Stress Relieved

Connection: Butt Fusion

PN 10 / SDR 11

Nomnial Actual OD D S Weight Weight Part

Size Size in in (lbs./ m) Lbs. Foot Number

3/8" 0.6�0 (16mm) 0.6�0 0.071 0.�09 0.065 PP05000016

½" 0.787 (�0mm) 0.787 0.075 0.��5 0.07� PP050000�0

¾" 0.98� (�5mm) 0.98� 0.091 0.�61 0.11� PP050000�5

1" 1.�60 (��mm) 1.�60 0.11� 0.570 0.178 PP050000��

1¼" 1.575 (�0mm) 1.575 0.1�6 0.90� 0.�8� PP050000�0

1½" 1.969 (50mm) 1.969 0.181 1.�0� 0.��9 PP05000050

�" �.�80 (6�mm) �.�80 0.��8 �.��� 0.69� PP0500006�

�½" �.95� (75mm) �.95� 0.�68 �.080 0.96� PP05000075

�" �.5�� (90mm) �.5�� 0.��� �.�66 1.�96 PP05000090

�" �.��1 (110mm) �.��1 0.�9� 6.6�� �.069 PP05000110

�½" �.9�1 (1�5mm) �.9�1 0.��9 8.60� �.688 PP050001�5

5" 5.51� (1�0mm) 5.51� 0.500 10.71� �.��8 PP050001�0

6" 6.�99 (160mm) 6.�99 0.575 1�.058 �.�9� PP05000160

7" 7.087 (180mm) 7.087 0.6�6 17.75� 5.5�8 PP05000180

8" 7.87� (�00mm) 7.87� 0.717 �1.890 6.8�1 PP05000�00

9" 8.858 (��5mm) 8.858 0.807 �7.7�0 8.66� PP05000��5

10" 9.8�� (�50mm) 9.8�� 0.89� ��.100 10.656 PP05000�50

11" 11.0�� (�80mm) 11.0�� 1.000 ��.680 1�.��8 PP05000�80

1�" 1�.�0� (�15mm) 1�.�0� 1.1�6 5�.1�0 16.91� PP05000�15

1�" 1�.976 (�55mm) 1�.976 1.�68 68.6�0 �1.�50 PP05000�55

16" 15.7�8 (�00mm) 15.7�8 1.��9 87.1�0 �7.��5 PP05000�00

18" 17.717 (�50mm) 17.717 1.610 110.��0 ��.��� PP05000�50

�0" 19.685 (500mm) 19.685 1.787 1�5.960 ��.�87 PP05000500

D

S

Page 6: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

6

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Description: Elbow: 90° PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

Elbow: 90°

PN 10 / SDR 11

Nomnial Actual OD D S Le Z Weight Part

Size Size in in in in lbs Number

½" 0.787 (�0mm) 0.787 0.075 0.157 0.866 0.011 PP050100�0

¾" 0.98� (�5mm) 0.98� 0.091 0.197 1.06� 0.015 PP050100�5

1" 1.�60 (��mm) 1.�60 0.11� 0.197 1.�78 0.0�7 PP050100��

1¼" 1.575 (�0mm) 1.575 0.1�6 0.197 1.7�� 0.075 PP050100�0

1½" 1.969 (50mm) 1.969 0.181 0.�76 �.087 0.1�9 PP05010050

�" �.�80 (6�mm) �.�80 0.��8 0.�76 �.598 0.�68 PP0501006�

�½" �.95� (75mm) �.95� 0.�68 0.��� �.150 0.�51 PP05010075

�" �.5�� (90mm) �.5�� 0.��� 0.��6 �.661 0.7�6 PP05010090

�" �.��1 (110mm) �.��1 0.�9� 0.�7� �.5�8 1.�69 PP05010110

�½" �.9�1 (1�5mm) �.9�1 0.��9 0.669 5.118 1.8�7 PP050101�5

5" 5.51� (1�0mm) 5.51� 0.500 0.591 5.709 �.519 PP050101�0

6" 6.�99 (160mm) 6.�99 0.575 0.709 6.575 �.8�8 PP05010160

7" 7.087 (180mm) 7.087 0.6�6 0.591 7.��� 5.�90 PP05010180

8" 7.87� (�00mm) 7.87� 0.717 0.7�8 8.110 7.667 PP05010�00

9" 8.858 (��5mm) 8.858 0.807 0.8�7 9.�91 10.�18 PP05010��5

10" 9.8�� (�50mm) 9.8�� 0.89� 0.787 10.079 1�.8�8 PP05010�50

11" 11.0�� (�80mm) 11.0�� 1.000 0.9�5 11.�17 19.�0� PP05010�80

1�" 1�.�0� (�15mm) 1�.�0� 1.1�6 0.866 1�.756 �7.87� PP05010�15

1�" 1�.976 (�55mm) 1�.976 1.�68 1.�96 15.157 ��.60� PP05010�55

16" 15.7�8 (�00mm) 15.7�8 1.��9 1.61� 17.��� 6�.7�� PP05010�00

Z

D

Le

S

r=d

Page 7: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

71.05�609

ChemicalProcess Piping Systems - Dimensional Data

Elbow 90° - Extended leg

Description: Elbow 90° - Extended Leg PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD D S Le Z Weight Part

Size Size in in in in lbs Number

½" 0.787 (�0mm) 0.787 0.075 �.087 �.071 0.0�6 PP051500�0

¾" 0.98� (�5mm) 0.98� 0.091 �.��� �.�07 0.07� PP051500�5

1" 1.�60 (��mm) 1.�60 0.11� �.795 �.016 0.1�6 PP051500��

1¼" 1.575 (�0mm) 1.575 0.1�6 �.91� �.�91 0.��0 PP051500�0

1½" 1.969 (50mm) 1.969 0.181 �.��8 �.�09 0.�65 PP05150050

�" �.�80 (6�mm) �.�80 0.��8 �.��8 �.7�� 0.587 PP0515006�

�½" �.95� (75mm) �.95� 0.�68 �.58� 5.�5� 0.906 PP05150075

�" �.5�� (90mm) �.5�� 0.��� �.6�� 5.7�8 1.�75 PP05150090

�" �.��1 (110mm) �.��1 0.�9� �.976 6.�96 �.�88 PP05150110

�½" �.9�1 (1�5mm) �.9�1 0.��9 �.016 6.890 �.508 PP051501�5

5" 5.51� (1�0mm) 5.51� 0.500 �.76� 8.0�1 �.070 PP051501�0

6" 6.�99 (160mm) 6.�99 0.575 5.6�0 9.�70 7.1�8 PP05150160

7" 7.087 (180mm) 7.087 0.6�6 5.591 9.7�� 9.�51 PP05150180

8" 7.87� (�00mm) 7.87� 0.717 6.0�� 10.�15 1�.�19 PP05150�00

9" 8.858 (��5mm) 8.858 0.807 6.06� 11.06� 16.��� PP05150��5

10" 9.8�� (�50mm) 9.8�� 0.89� 5.��6 11.�96 19.�9� PP05150�50

11" 11.0�� (�80mm) 11.0�� 1.000 5.669 1�.598 �6.906 PP05150�80

1�" 1�.�0� (�15mm) 1�.�0� 1.1�6 6.06� 1�.567 �8.65� PP05150�15

Z

D

Le

S

Page 8: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

8

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Elbow 45° - Extended leg

Description: Elbow 45° - Extended Leg PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD D S Le Z Weight Part

Size Size in in in in lbs Number

½" 0.787 (�0mm) 0.787 0.075 �.0�7 �.87� 0.0�8 PP051600�0

¾" 0.98� (�5mm) 0.98� 0.091 �.��� �.150 0.077 PP051600�5

1" 1.�60 (��mm) 1.�60 0.11� �.795 �.858 0.1�9 PP051600��

1¼" 1.575 (�0mm) 1.575 0.1�6 �.87� �.1�� 0.��0 PP051600�0

1½" 1.969 (50mm) 1.969 0.181 �.��1 �.�5� 0.�6� PP05160050

�" �.�80 (6�mm) �.�80 0.��8 �.598 �.5�8 0.�77 PP0516006�

�½" �.95� (75mm) �.95� 0.�68 �.795 5.079 0.6�8 PP05160075

�" �.5�� (90mm) �.5�� 0.��� �.�68 5.51� 0.990 PP05160090

�" �.��1 (110mm) �.��1 0.�9� �.661 6.�99 1.705 PP05160110

�½" �.9�1 (1�5mm) �.9�1 0.��9 �.858 6.65� �.�6� PP051601�5

5" 5.51� (1�0mm) 5.51� 0.500 �.80� 7.95� �.90� PP051601�0

6" 6.�99 (160mm) 6.�99 0.575 5.6�0 9.055 5.��� PP05160160

7" 7.087 (180mm) 7.087 0.6�6 5.6�0 9.��9 7.06� PP05160180

8" 7.87� (�00mm) 7.87� 0.717 6.0�� 10.��6 10.175 PP05160�00

9" 8.858 (��5mm) 8.858 0.807 6.0�� 10.8�7 1�.�10 PP05160��5

10" 9.8�� (�50mm) 9.8�� 0.89� 5.�76 11.�96 17.�58 PP05160�50

11" 11.0�� (�80mm) 11.0�� 1.000 5.6�0 1�.598 ��.�7� PP05160�80

1�" 1�.�0� (�15mm) 1�.�0� 1.1�6 6.10� 1�.567 �5.718 PP05160�15

Z

D

Le

ZLeS

Page 9: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

91.05�609

ChemicalProcess Piping Systems - Dimensional Data

Tee

Description: Tee PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD D S L L1 Z Weight Part

Size Size in in in in in lbs Number

½" 0.787 (�0mm) 0.787 0.075 �.071 0.��� 1.�96 0.055 PP050�00�0

¾" 0.98� (�5mm) 0.98� 0.091 �.�68 0.��� 1.65� 0.07� PP050�00�5

1" 1.�60 (��mm) 1.�60 0.11� �.��5 0.��� 1.7�� 0.106 PP050�00��

1¼" 1.575 (�0mm) 1.575 0.1�6 �.6�� 0.��� 1.811 0.156 PP050�00�0

1½" 1.969 (50mm) 1.969 0.181 �.9�7 0.�7� 1.969 0.�57 PP050�0050

�" �.�80 (6�mm) �.�80 0.��8 5.0�9 0.669 �.6�8 0.5�� PP050�006�

�½" �.95� (75mm) �.95� 0.�68 5.906 0.7�8 �.99� 0.8�7 PP050�0075

�" �.5�� (90mm) �.5�� 0.��� 7.�05 1.5�5 �.055 1.�09 PP050�0090

�" �.��1 (110mm) �.��1 0.�9� 10.0�9 �.165 5.157 �.871 PP050�0110

�½" �.9�1 (1�5mm) �.9�1 0.��9 9.8�� 1.969 5.157 �.586 PP050�01�5

5" 5.51� (1�0mm) 5.51� 0.500 1�.�6� �.�6� 6.�60 5.�79 PP050�01�0

6" 6.�99 (160mm) 6.�99 0.575 1�.��1 �.165 6.�78 7.��9 PP050�0160

7" 7.087 (180mm) 7.087 0.6�6 16.9�9 �.6�� 8.�65 1�.��� PP050�0180

8" 7.87� (�00mm) 7.87� 0.717 17.1�6 �.�65 8.701 1�.916 PP050�0�00

9" 8.858 (��5mm) 8.858 0.807 17.717 �.8�5 8.9�7 �0.��0 PP050�0��5

10" 9.8�� (�50mm) 9.8�� 0.89� 17.6�8 �.5�0 8.9�7 ��.100 PP050�0�50

11" 11.0�� (�80mm) 11.0�� 1.000 �0.669 �.��8 10.51� ��.660 PP050�0�80

1�" 1�.�0� (�15mm) 1�.�0� 1.1�6 ��.�8� �.��8 11.1�� �5.��0 PP050�0�15

1�" 1�.976 (�55mm) 1�.976 1.�68 �7.��� �.9�7 1�.7�0 68.��0 PP050�0�55

16" 15.7�8 (�00mm) 15.7�8 1.��9 �8.5�� �.016 1�.17� 8�.600 PP050�0�00

18" 17.717 (�50mm) 17.717 1.610 ��.95� 5.�15 16.�96 1��.000 PP050�0�50

�0" 19.685 (500mm) 19.685 1.787 �6.61� 6.�99 18.110 171.600 PP050�0500

ZD

L1

L

S

Page 10: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

10

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Tee: Reduced

Description: Tee: Reduced PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Fabricated

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD D1 d2 S1 S2 L L1 L2 z1 z2 Weight Part

Size Size in in in in in in in in in lbs Number

�" x 1" �.5�� (90mm) x 1.�60 (��mm) �.5�� 1.�60 0.��� 0.11� 7.99� �.087 0.906 �.016 �.��6 1.��� PP050�0900��

�" x 1" �.��1 (110mm) x 1.�60 (��mm) �.��1 1.�60 0.�9� 0.11� 9.�1� �.598 0.866 �.606 �.58� �.068 PP050�1100��

�" x 1½" �.��1 (110mm) x 1.969 (50mm) �.��1 1.969 0.�9� 0.181 9.��9 �.598 1.06� �.606 �.976 �.068 PP050�110050

�½" x �" �.9�1 (1�5mm) x �.�80 (6�mm) �.9�1 �.�80 0.�9� 0.��8 10.�9� �.756 1.��0 5.197 �.��1 �.080 PP050�1�506�

�½" x �" �.9�1 (1�5mm) x �.5�� (90mm) �.9�1 �.5�� 0.��9 0.��� 10.�9� 1.77� 1.65� 5.197 �.8�� �.5�0 PP050�1�5090

5" x �" 5.51� (1�0mm) x �.�80 (6�mm) 5.51� �.�80 0.500 0.��8 11.�57 �.�68 1.�60 5.7�8 �.7�� �.1�6 PP050�1�006�

5" x �" 5.51� (1�0mm) x �.5�� (90mm) 5.51� �.5�� 0.500 0.��� 11.�57 �.189 1.61� 5.7�8 5.118 �.��� PP050�1�0090

5" x �½" 5.51� (1�0mm) x �.95� (75mm) 5.51� �.95� 0.500 0.�68 11.�57 �.189 1.�78 5.7�8 5.118 �.9�8 PP050�1�0075

5" x �" 5.51� (1�0mm) x �.��1 (110mm) 5.51� �.��1 0.500 0.�9� 11.�57 1.969 1.7�� 5.7�8 5.51� �.9�8 PP050�1�0110

5" x �½" 5.51� (1�0mm) x �.9�1 (1�5mm) 6.�99 �.9�1 0.575 0.��9 1�.�0� �.�8� 1.850 6.��0 5.906 6.556 PP050�1601�5

6" x �" 6.�99 (160mm) x �.�80 (6�mm) 7.087 �.�80 0.6�6 0.��8 1�.701 �.9�1 1.181 6.850 5.51� 7.��8 PP050�18006�

6" x �½" 6.�99 (160mm) x �.95� (75mm) 7.087 �.95� 0.6�6 0.�68 1�.701 �.�09 1.181 6.850 6.�99 7.700 PP050�180075

7" x �" 7.087 (180mm) x �.��1 (110mm) 7.087 �.��1 0.6�6 0.�9� 1�.701 �.6�� 1.969 6.850 5.906 8.580 PP050�180110

8" x �" 7.87� (�00mm) x �.�80 (6�mm) 7.87� �.�80 0.717 0.��8 15.0�9 5.6�0 1.��0 7.5�0 5.709 10.��0 PP050��0006�

8" x �" 7.87� (�00mm) x �.5�� (90mm) 7.87� �.5�� 0.717 0.��� 15.�5� �.961 1.575 7.677 6.�78 9.9�� PP050��00090

8" x �" 7.87� (�00mm) x �.��1 (110mm) 7.87� �.��1 0.717 0.�9� 15.�5� �.80� 1.575 7.677 6.�99 9.856 PP050��00110

8" x �½" 7.87� (�00mm) x �.9�1 (1�5mm) 7.87� �.9�1 0.717 0.��9 15.�5� �.�88 1.69� 7.677 6.�96 1�.�76 PP050��001�5

8" x 6" 7.87� (�00mm) x 6.�99 (160mm) 7.87� 6.�99 0.717 0.575 15.�5� �.858 �.�6� 6.�96 7.087 10.560 PP050��00160

10" x 6" 9.8�� (�50mm) x 6.�99 (160mm 9.8�� 6.�99 0.89� 0.575 17.��� �.��1 �.�8� 8.661 8.�86 17.�58 PP050��50160

10" x �" 9.8�� (�50mm) x �.��1 (110mm) 9.8�� �.��1 0.89� 0.�9� 17.��1 5.�15 1.�99 8.7�0 7.677 17.600 PP050��50160

z2

z1

D1

d2

L1

L2

L

S2

S1

Page 11: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

111.05�609

ChemicalProcess Piping Systems - Dimensional Data

Tee - Extended leg

Description: Tee - Extended Leg PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD D S L L1 Z Weight Part

Size Size in in in in in lbs Number

½" 0.787 (�0mm) 0.787 0.075 1.61� �.�5� �.1�6 0.0�� PP05��00�0

¾" 0.98� (�5mm) 0.98� 0.091 1.61� �.80� �.�6� 0.088 PP05��00�5

1" 1.�60 (��mm) 1.�60 0.11� 1.811 5.��� �.6�8 0.15� PP05��00��

1¼" 1.575 (�0mm) 1.575 0.1�6 �.0�7 6.�78 �.��8 0.�5� PP05��00�0

1½" 1.969 (50mm) 1.969 0.181 �.��� 7.��� �.6�� 0.��0 PP05��0050

�" �.�80 (6�mm) �.�80 0.��8 �.6�8 8.��6 �.�5� 0.81� PP05��006�

�½" �.95� (75mm) �.95� 0.�68 �.8�5 9.685 �.80� 1.�86 PP05��0075

�" �.5�� (90mm) �.5�� 0.��� �.150 11.06� 5.��� �.01� PP05��0090

�" �.��1 (110mm) �.��1 0.�9� �.�65 1�.6�8 6.�78 �.619 PP05��0110

�½" �.9�1 (1�5mm) �.9�1 0.��9 �.858 1�.780 6.9�9 �.86� PP05��01�5

5" 5.51� (1�0mm) 5.51� 0.500 �.09� 15.709 7.87� 5.676 PP05��01�0

6" 6.�99 (160mm) 6.�99 0.575 �.09� 16.�60 8.110 9.0�� PP05��0160

7" 7.087 (180mm) 7.087 0.6�6 5.6�0 �0.787 10.��6 1�.9�8 PP05��0180

8" 7.87� (�00mm) 7.87� 0.717 �.88� 19.88� 9.961 16.5�� PP05��0�00

9" 8.858 (��5mm) 8.858 0.807 5.079 ��.008 10.9�5 ��.9�� PP05��0��5

10" 9.8�� (�50mm) 9.8�� 0.89� 5.197 ��.91� 11.��9 ��.860 PP05��0�50

11" 11.0�� (�80mm) 11.0�� 1.000 5.�76 ��.76� 1�.1�6 ��.670 PP05��0�80

1�" 1�.�0� (�15mm) 1�.�0� 1.1�6 6.06� �7.6�8 1�.6�� ��.��0 PP05��0�15

Z

D

L1

L

S

Page 12: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

1�

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Tee: Reduced - Extended leg

Description: Tee: Reduced - Extended Leg PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

z2

z1

D1

D2

L1

L2

L

S2

S1

PN 10 / SDR 11

Nominal Actual OD D1 D2 S1 S2 L L1 L2 z1 z2 Weight Part

Size Size in in in in in in in in in lbs Number

�" x 1½" �.�80 (6�mm) x 1.969 (50mm) �.�80 1.969 0.��8 0.181 8.�65 �.�80 �.�05 �.�5� �.055 0.660 PP05��06�050

�½" x 1" �.95� (75mm) x 1.�60 _��mm) �.95� 1.�60 0.�68 0.11� 10.079 �.756 1.811 5.0�9 �.�5� 1.078 PP05��0750��

�½" x 1½" �.95� (75mm) x 1.969 (50mm) �.95� 1.969 0.�68 0.181 9.961 �.756 �.�05 5.000 �.��9 1.188 PP05��075050

�½" x �" �.95� (75mm) x �.�80 (6�mm) �.95� �.�80 0.�68 0.��8 10.0�9 �.756 �.�80 5.0�9 �.606 1.��� PP05��07506�

�" x 1½" �.5�� (90mm) x 1.969 (50mm) �.5�� 1.969 0.��� 0.181 10.709 �.110 �.�8� 5.�15 �.606 1.�96 PP05��090050

�" x �" �.5�� (90mm) x �.�80 (6�mm) �.5�� �.�80 0.��� 0.��8 10.709 �.110 �.559 5.�15 �.8�� 1.716 PP05��09006�

�" x �½" �.5�� (90mm) x �.95� (75mm) �.5�� �.95� 0.��� 0.�68 10.709 �.87� �.677 5.�5� 5.��� 1.760 PP05��090075

�" x �" �.��1 (110mm) x �.�80 (6�mm) �.��1 �.�80 0.�9� 0.��8 1�.598 �.��5 �.559 6.�60 5.787 �.750 PP05��11006�

�" x �½" �.��1 (110mm) x �.95� (75mm) �.��1 �.95� 0.�9� 0.�68 1�.165 �.��8 �.756 6.10� 5.9�5 �.�00 PP05��110075

�" x �" �.��1 (110mm) x �.5�� (90mm) �.��1 �.5�� 0.�9� 0.��� 1�.5�0 �.�86 �.150 6.�60 6.��0 �.168 PP05��110090

�½" x �" �.9�1 (1�5mm) x �.��1 (110mm) �.9�1 �.��1 0.��9 0.�9� 1�.��5 �.5�� �.�68 6.7�� 6.69� �.09� PP05��1�5110

6" x �" 6.�99 (160mm) x �.�80 (6�mm) 6.�99 �.�80 0.575 0.��8 1�.50� �.858 �.559 6.77� 6.9�9 5.896 PP05��16006�

6" x �½" 6.�99 (160mm) x x �.95� (75mm) 6.�99 �.95� 0.575 0.�68 1�.50� �.858 �.91� 6.77� 7.087 5.808 PP05��160075

6" x �" 6.�99 (160mm) x �.5�� (90mm) 6.�99 �.5�� 0.575 0.��� 16.06� �.976 �.110 8.071 7.�0� 5.896 PP05��160090

6" x �" 6.�99 (160mm) x �.��1 (110mm) 6.�99 �.��1 0.575 0.�9� 16.06� �.976 �.��6 8.071 7.677 7.�60 PP05��160110

7" x 6" 7.087 (180mm) x 6.�99 (160mm) 7.087 6.�99 0.6�6 0.575 16.181 �.1�� �.701 8.110 8.071 9.�60 PP05��180160

8" x �½" 7.87� (�00mm) x �.95� (75mm) 7.87� �.�80 0.717 0.��8 19.606 �.�09 �.�80 9.80� 7.�80 1�.5�0 PP05���0006�

8" x �" 7.87� (�00mm) x �.5�� (90mm) 7.87� �.5�� 0.717 0.��� 19.606 �.�09 �.110 9.80� 8.150 1�.�10 PP05���00090

8" x �" 7.87� (�00mm) x �.��1 (110mm) 7.87� �.��1 0.717 0.�9� 19.606 �.�09 �.��8 9.80� 8.�65 15.�88 PP05���00110

8" x 6" 7.87� (�00mm) x 6.�99 (160mm) 7.87� 6.�99 0.717 0.575 19.606 �.�09 �.858 9.80� 9.�1� 18.�60 PP05���00160

9" x �½" 8.858 (��5mm) x �.95� (75mm) 8.858 �.95� 0.807 0.�68 17.�6� �.7�� �.95� 8.701 8.9�7 1�.080 PP05����5075

9" x �" 8.858 (��5mm) x �.5�� (90mm) 8.858 �.5�� 0.807 0.��� �1.850 5.000 �.150 10.866 8.898 �0.6�6 PP05����5090

9" x �" 8.858 (��5mm) x �.��1 (110mm) 8.858 �.��1 0.807 0.�9� �1.850 5.000 �.��6 10.866 9.�5� 1�.5�0 PP05����5110

9" x 6" 8.858 (��5mm) x 6.�99 (160mm) 8.858 6.�99 0.807 0.575 �1.850 5.000 �.1�� 10.866 10.0�9 17.��8 PP05����5160

9" x 7" 8.858 (��5mm) x 7.087 (180mm) 8.858 7.087 0.807 0.6�6 �1.�78 5.197 5.197 10.709 10.906 �0.988 PP05����5180

10" x �" 9.8�� (�50mm) x �.��1 (110mm) 9.8�� �.��1 0.89� 0.�9� ��.6�8 5.118 �.��8 11.��9 9.5�8 - PP05���50110

10" x 6" 9.8�� (�50mm) x 6.�99 (160mm) 9.8�� 6.�99 0.89� 0.575 ��.6�8 5.118 �.858 11.��9 10.�76 - PP05���50160

1�" x �" 1�.�0� (�15mm) x �.��1 (110mm) 1�.�0� �.��1 1.1�6 0.�9� �7.�6� 5.906 �.��8 1�.6�� 10.906 - PP05���15110

1�" x 6" 1�.�0� (�15mm) x 6.�99 (160mm) 1�.�0� 6.�99 1.1�6 0.575 �7.�6� 5.906 �.016 1�.6�� 11.�17 - PP05���15160

1�" x 10" 1�.�0� (�15mm) x 9.8�� (�50mm) 1�.�0� 9.8�� 1.1�6 0.89� �7.�6� 5.906 5.118 1�.6�� 1�.795 - PP05���15�50

Page 13: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1�1.05�609

ChemicalProcess Piping Systems - Dimensional Data

Reducer

Description: Reducer PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

D1D2

L1

L2

L

S2S1

PN 10 / SDR 11

Nominal Actual OD D1 D2 S1 S2 L L1 L2 Weight Part

Size Size in in in in in in in Lbs Number

¾" x ½" 0.98� (�5mm) x 0.787 (�0mm) 0.98� 0.787 0.091 0.075 �.677 0.787 0.787 0.011 PP050�0�50�0

1" x ½" 1.�60 (��mm) x 0.787 (�0mm) 1.�60 0.787 0.11� 0.075 �.677 0.787 0.787 0.0�� PP050�0�60�0

1" x ¾" 1.�60 (��mm) x 0.98� (�5mm) 1.�60 0.98� 0.11� 0.091 �.677 0.787 0.787 0.0�� PP050�0��0�5

1¼" x ½" 1.575 (�0mm) x 0.787 (�0mm) 1.575 0.787 0.1�6 0.075 1.969 0.709 0.51� 0.0�� PP050�0�00�0

1¼" x ¾" 1.575 (�0mm) x 0.98� (�5mm) 1.575 0.98� 0.1�6 0.091 �.��1 0.787 0.787 0.0�7 PP050�0�00�5

1¼" x 1" 1.575 (�0mm) x 1.�60 (��mm) 1.575 1.�60 0.1�6 0.11� �.��1 0.787 0.787 0.0�� PP050�0�00��

1½" x ¾" 1.969 (50mm) x 0.98� (�5mm) 1.969 0.98� 0.181 0.091 1.969 0.98� 1.06� 0.05� PP050�0500�5

1½" x 1" 1.969 (50mm) x 1.�60 (��mm) 1.969 1.�60 0.181 0.11� 1.969 1.06� 1.06� 0.057 PP050�0500��

1½" x 1¼" 1.969 (50mm) x 1.575 (�0mm) 1.969 1.575 0.181 0.1�6 1.969 1.181 1.0�� 0.06� PP050�0500�0

�" x 1" �.�80 (6�mm) x 1.�60 (��mm) �.�80 1.�60 0.��8 0.11� �.�6� 1.06� 0.98� 0.10� PP050�06�0��

�" x 1¼" �.�80 (6�mm) x 1.575 (�0mm) �.�80 1.575 0.��8 0.1�6 �.�6� 1.10� 1.06� 0.11� PP050�06�0�0

�" x 1½" �.�80 (6�mm) x 1.969 (50mm) �.�80 1.969 0.��8 0.181 �.�6� 1.1�� 1.06� 0.1�0 PP050�06�050

�½" x 1" �.95� (75mm) x 1.�60 (��mm) �.95� 1.�60 0.�68 0.11� �.756 0.98� 0.�9� 0.1�� PP050�0750��

�½" x 1¼" �.95� (75mm) x 1.575 (�0mm) �.95� 1.575 0.�68 0.1�6 �.756 1.181 0.98� 0.165 PP050�0750�0

�½" x 1½" �.95� (75mm) x 1.969 (50mm) �.95� 1.969 0.�68 0.181 �.756 1.181 1.10� 0.161 PP050�075050

�½" x �" �.95� (75mm) x �.�80 (6�mm) �.95� �.�80 0.�68 0.��8 �.��8 0.98� 1.0�� 0.1�8 PP050�07506�

�" x 1½" �.5�� (90mm) x 1.969 (50mm) �.5�� 1.969 0.��� 0.181 �.91� 0.866 0.787 0.�6� PP050�090050

�" x �" �.5�� (90mm) x �.�80 (6�mm) �.5�� �.�80 0.��� 0.��8 �.91� 1.181 1.10� 0.�8� PP050�09006�

�" x �½" �.5�� (90mm) x �.95� (75mm) �.5�� �.95� 0.��� 0.�68 �.91� 1.��0 1.0�� 0.�1� PP050�090075

�" x 1½" �.��1 (110mm) x 1.969 (50mm) �.��1 1.969 0.�9� 0.181 �.5�� 1.10� 0.787 0.��� PP050�110050

�" x �" �.��1 (110mm) x �.�80 (6�mm) �.��1 �.�80 0.�9� 0.��8 �.1�� 1.61� 1.�78 0.585 PP050�11006�

�" x �½" �.��1 (110mm) x �.95� (75mm) �.��1 �.95� 0.�9� 0.�68 �.5�� 1.65� 1.0�� 0.�75 PP050�110075

�" x �" �.��1 (110mm) x �.5�� (90mm) �.��1 �.5�� 0.�9� 0.��� �.9�7 1.61� 1.575 0.6�7 PP050�110090

�½" x �" �.9�1 (1�5mm) x �.�80 (6�mm)) �.9�1 �.�80 0.��9 0.��8 �.7�� 1.�60 0.6�0 0.79� PP050�1�1506

�½" x �½" �.9�1 (1�5mm) x �.95� (75mm) �.9�1 �.95� 0.��9 0.�68 �.858 1.�60 0.7�8 0.660 PP050�1�5075

�½" x �" �.9�1 (1�5mm) x �.5�� (90mm) �.9�1 �.5�� 0.��9 0.��� �.��1 1.61� 1.61� 0.8�6 PP050�1�5090

�½" x �" �.9�1 (1�5mm) x �.��1 (110mm) �.9�1 �.��1 0.��9 0.�9� �.9�7 1.�60 1.10� 0.8�� PP050�1�5110

(Continued on Next Page)

Page 14: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

1�

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Reducer

Description: Reducer PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

D1D2

L1

L2

L

S2S1

PN 10 / SDR 11

Nominal Actual OD D1 D2 S1 S2 L L1 L2 Weight Part

Size Size in in in in in in in Lbs Number

5" x �½" 5.51� (1�0mm) x �.95� (75mm) 5.51� �.95� 0.500 0.�68 5.�15 1.�78 0.7�8 0.5�8 PP050�1�0075

5" x �" 5.51� (1�0mm) x �.5�� (90mm) 5.51� �.5�� 0.500 0.��� 5.118 1.�78 0.866 0.57� PP050�1�0090

5" x �" 5.51� (1�0mm) x �.��1 (110mm) 5.51� �.��1 0.500 0.�9� �.7�� 1.�78 1.10� 0.506 PP050�1�0110

5" x �" 5.51� (1�0mm) x �.9�1 (1�5mm) 5.51� �.9�1 0.500 0.��9 �.7�� 1.�78 1.�60 0.5�8 PP050�1�01�5

6" x �" 6.�99 (160mm) x �.5�� (90mm) 6.�99 �.5�� 0.575 0.��� 5.��� �.008 1.65� 1.56� PP050�160090

6" x �" 6.�99 (160mm) x �.��1 (110mm) 6.�99 �.��1 0.575 0.�9� 5.0�9 �.008 1.575 1.58� PP050�160110

6" x �½" 6.�99 (160mm) x �.9�1 (1�5mm) 6.�99 �.9�1 0.575 0.��9 �.80� �.008 1.65� 1.57� PP050�1601�5

6" x 5" 6.�99 (160mm) x 5.51� (1�0mm) 6.�99 5.51� 0.575 0.500 �.7�� �.0�7 1.850 1.617 PP050�1601�0

7" x �" 7.087 (180mm) x �.5�� (90mm) 7.087 �.5�� 0.6�6 0.��� 5.709 1.77� 0.866 1.188 PP050�180090

7" x �" 7.087 (180mm) x �.��1 (110mm) 7.087 �.��1 0.6�6 0.�9� 5.906 1.77� 1.10� 1.166 PP050�180110

7" x �½" 7.087 (180mm) x �.9�1 (1�5mm) 7.087 �.9�1 0.6�6 0.��9 5.6�0 �.008 1.65� 1.078 PP050�1801�5

7" x 5" 7.087 (180mm) x 5.51� (1�0mm) 7.087 5.51� 0.6�6 0.500 5.�15 1.77� 1.�78 1.01� PP050�1801�0

7" x 6" 7.087 (180mm) x 6.�99 (160mm) 7.087 6.�99 0.6�6 0.575 5.51� 1.77� 1.575 1.01� PP050�180160

8" x 5" 7.87� (�00mm) x 5.51� (1�0mm) 7.87� 5.51� 0.717 0.500 5.709 �.�80 1.69� 1.��0 PP050���01�0

8" x 6" 7.87� (�00mm) x 6.�99 (160mm) 7.87� 6.�99 0.717 0.575 5.709 �.�80 1.969 �.816 PP050���0160

8" x 7" 7.87� (�00mm) x 7.087 (180mm) 7.87� 7.087 0.717 0.6�6 5.709 1.969 1.77� 1.188 PP050���0180

9" x 5" 8.858 (��5mm) x 5.51� (1�0mm) 8.858 5.51� 0.807 0.500 5.906 �.�0� 1.890 �.��1 PP050���51�0

9" x 6" 8.858 (��5mm) x 6.�99 (160mm) 8.858 6.�99 0.807 0.575 6.�99 �.559 �.1�6 �.619 PP050���5160

9" x 7" 8.858 (��5mm) x 7.087 (180mm) 8.858 7.087 0.807 0.6�6 6.�99 �.165 �.�8� �.850 PP050���5180

9" x 8" 8.858 (��5mm) x 7.87� (�00mm) 8.858 7.87� 0.807 0.717 6.�99 �.165 1.969 1.5�0 PP050���5�00

10" x 6" 9.8�� (�50mm) x 6.�99 (160mm 9.8�� 6.�99 0.89� 0.575 6.69� �.�80 �.087 �.7�0 PP050��50160

10" x 7" 9.8�� (�50mm) x 7.087 (180mm) 9.8�� 7.087 0.89� 0.6�6 6.890 �.5�0 �.�8� 5.0�7 PP050��50180

10" x 8" 9.8�� (�50mm) x 7.87� (�00mm) 9.8�� 7.87� 0.89� 0.717 7.087 �.5�0 �.5�0 5.500 PP050��50�00

10" x 9" 9.8�� (�50mm) x 8.858 (��5mm) 9.8�� 8.858 0.89� 0.807 7.087 �.�6� �.165 6.050 PP050��50��5

11" x 8" 11.0�� (�80mm) x 7.87� (�00mm) 11.0�� 7.87� 1.000 0.717 8.071 �.756 1.969 7.�16 PP050��80�00

11" x 9" 11.0�� (�80mm) x 8.858 (��5mm) 11.0�� 8.858 1.000 0.807 7.99� �.8�5 �.��� 8.�7� PP050��80��5

11" x 10" 11.0�� (�80mm) x 9.8�� (�50mm) 11.0�� 9.8�� 1.000 0.89� 7.95� �.8�5 �.��1 8.096 PP050��80�50

(Continued on Next Page)

Page 15: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

151.05�609

ChemicalProcess Piping Systems - Dimensional Data

Reducer

Description: Reducer PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Machined

Connection: Butt Fusion

D1D2

L1

L2

L

S2S1

PN 10 / SDR 11

Nominal Actual OD D1 D2 S1 S2 L L1 L2 Weight Part

Size Size in in in in in in in Lbs Number

1�"x 8" 1�.�0� (�15mm) x 7.87� (�00mm) 1�.�0� 7.87� 1.1�6 0.717 9.7�� �.150 1.969 9.9�� PP050��15�00

1�"x 9" 1�.�0� (�15mm) x 8.858 (��5mm) 1�.�0� 8.858 1.1�6 0.807 9.��1 �.�07 �.�6� 10.�7� PP050��15��5

1�" x 10" 1�.�0� (�15mm) x 9.8�� (�50mm) 1�.�0� 9.8�� 1.1�6 0.89� 9.09� �.�86 �.�80 11.000 PP050��15�50

1�" x 11" 1�.�0� (�15mm) x 11.0�� (�80mm) 1�.�0� 11.0�� 1.1�6 1.000 8.7�0 �.150 �.756 11.70� PP050��15�80

1�" x 9" 1�.976 (�55mm) x 8.858 (��5mm) 1�.976 8.858 1.�68 0.807 9.6�6 �.5�� �.165 9.�7� PP050��55��5

1�" x 10" 1�.976 (�55mm) x 9.8�� (�50mm) 1�.976 9.8�� 1.�68 0.89� 9.6�6 �.5�� �.�6� 8.668 PP050��55�50

1�" x 11" 1�.976 (�55mm) x 11.0�� (�80mm) 1�.976 11.0�� 1.�68 1.000 9.6�6 �.5�� �.756 8.18� PP050��55�80

1�" x 1�" 1�.976 (�55mm) x 1�.�0� (�15mm) 1�.976 1�.�0� 1.�68 1.1�6 9.6�6 �.5�� �.150 7.788 PP050��55�15

16" x 9" 15.7�8 (�00mm) x 8.858 (��5mm) 15.7�8 9.8�� 0.89� 0.559 10.��6 �.7�0 �.756 9.680 PP050��00��5

16" x 10" 15.7�8 (�00mm) x 9.8�� (�50mm) 15.7�8 11.0�� 0.89� 0.6�6 10.��6 �.7�0 �.756 9.0�0 PP050��00�50

16" x 11" 15.7�8 (�00mm) x 11.0�� (�80mm) 15.7�8 1�.�0� 0.89� 0.705 10.��6 �.7�0 �.150 7.9�0 PP050��00�80

16" x 1�" 15.7�8 (�00mm) x 1�.�0� (�15mm) 15.7�8 1�.976 0.89� 0.791 10.��6 �.7�0 �.5�� 6.8�0 PP050��00�15

16" x 1�" 15.7�8 (�00mm) x 1�.976 (�55mm) 17.717 11.0�� 1.00� 0.6�6 9.055 �.�6� �.756 1�.�00 PP050��00�55

18" x 11" 17.717 (�50mm) x 11.0�� (�80mm) 17.717 1�.�0� 1.00� 0.705 9.055 �.�6� �.150 11.880 PP050��50�80

18" x 1�" 17.717 (�50mm) x 1�.�0� (�15mm) 17.717 1�.976 1.00� 0.791 9.055 �.�6� �.5�� 11.000 PP050��50�15

18" x 1�" 17.717 (�50mm) x 1�.976 (�55mm) 17.717 15.7�8 1.00� 0.89� 9.055 �.�6� �.7�0 9.680 PP050��50�55

18" x 16" 17.717 (�50mm) x 15.7�8 (�00mm) 19.685 1�.�0� 1.118 0.705 9.055 �.�6� �.150 17.8�0 PP050��50�00

�0" x 1�" 19.685 (500mm) x 1�.�0� (�15mm) 19.685 1�.976 1.118 0.791 9.055 �.�6� �.5�� 16.060 PP050�500�15

�0" x 1�" 19.685 (500mm) x 1�.976 (�55mm) 19.685 15.7�8 1.118 0.89� 9.055 �.�6� �.7�0 1�.7�0 PP050�500�55

�0" x 16" 19.685 (500mm) x 15.7�8 (�00mm) 19.685 17.717 1.118 1.00� 9.055 �.�6� �.�6� 1�.100 PP050�500�00

�0" x 16" 19.685 (500mm) x 17.717 (�50mm) ��.0�7 15.7�8 1.��8 0.89� 9.055 �.�6� �.7�0 �1.780 PP050�500�50

��" x 16" ��.0�7 (560mm) x 15.7�8 (�00mm) ��.0�7 17.717 1.��8 1.00� 7.87� �.�6� �.�6� 18.9�0 PP050�560�00

��" x 18" ��.0�7 (560mm) x 17.717 (�50mm) ��.0�7 19.685 1.��8 1.118 7.87� �.�6� �.�6� 16.7�0 PP050�560�50

��" x �0" ��.0�7 (560mm) x 19.685 (500mm) ��.80� 15.7�8 1.�06 0.89� 9.055 �.�6� �.7�0 ��.��0 PP050�560500

��" x 16" ��.80� (6�0mm) x 15.7�8 (�00mm) ��.80� 17.717 1.�06 1.00� 7.87� �.�6� �.�6� �0.1�0 PP050�6�0�00

��" x 18" ��.80� (6�0mm) x 17.717 (�50mm) ��.80� 19.685 1.�06 1.118 7.87� �.�6� �.�6� �6.�00 PP050�6�0�50

��" x �0" ��.80� (6�0mm) x 19.685 (500mm) ��.80� ��.0�7 1.�06 1.��8 7.87� �.�6� �.�6� �1.560 PP050�6�0500

��" x ��" ��.80� (6�0mm) x ��.0�7 (560mm) �7.95� 19.685 1.58� 1.118 7.�80 �.�07 1.575 �1.800 PP050�6�0560

Page 16: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

16

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Reducer: Concentric - Extended leg

Description: Reducer: Concentric - Extended Leg PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 10 / SDR 11

Nom. Actual OD D1 D2 S1 S2 L L1 L2 Weight Part

Size Size in in in in in in in lbs Number

¾" x ½" 0.98� (�5mm) x 0.787 (�0mm) 0.98� 0.787 0.091 0.075 �.��6 1.61� 1.�57 0.0�0 PP05190�50�0

1" x ½" 1.�60 (��mm) x 0.787 (�0mm) 1.�60 0.787 0.11� 0.075 �.9�7 1.7�� 1.�57 0.05� PP05190��0�0

1" x ¾" 1.�60 (��mm) x 0.98� (�5mm) 1.�60 0.98� 0.11� 0.091 �.9�7 1.7�� 1.61� 0.06� PP05190��0�5

1¼" x ½" 1.575 (�0mm) x 0.787 (�0mm) 1.575 0.787 0.1�6 0.075 �.09� 1.9�9 1.77� 0.077 PP05190�00�0

1¼" x ¾" 1.575 (�0mm) x 0.98� (�5mm) 1.575 0.98� 0.1�6 0.091 �.09� 1.9�9 1.61� 0.088 PP05190�00�5

1¼" x 1" 1.575 (�0mm) x 1.�60 (��mm) 1.575 1.�60 0.1�6 0.11� �.1�� 1.9�9 1.7�� 0.088 PP05190�00��

1½" x ¾" 1.969 (50mm) x 0.98� (�5mm) 1.969 0.98� 0.181 0.091 5.118 �.�05 1.7�� 0.1�8 PP05190500�5

1½" x 1" 1.969 (50mm) x 1.�60 (��mm) 1.969 1.�60 0.181 0.11� 5.197 �.��� 1.850 0.1�� PP05190500��

1½" x 1¼" 1.969 (50mm) x 1.575 (�0mm) 1.969 1.575 0.181 0.1�6 5.�76 �.�05 �.0�7 0.16� PP05190500�0

�" x 1" �.�80 (6�mm) x 1.�60 (��mm) �.�80 1.�60 0.��8 0.11� 5.591 �.�80 1.811 0.��0 PP051906�0��

�" x 1¼" �.�80 (6�mm) x 1.575 (�0mm) �.�80 1.575 0.��8 0.1�6 5.787 �.5�0 �.0�7 0.�6� PP051906�0�0

�" x 1½" �.�80 (6�mm) x 1.969 (50mm) �.�80 1.969 0.��8 0.181 5.98� �.5�0 �.�8� 0.�08 PP051906�050

�½" x 1½" �.95� (75mm) x 1.969 (50mm) �.95� 1.969 0.�68 0.181 5.906 �.559 �.��� 0.�96 PP0519075050

�½" x �" �.95� (75mm) x �.�80 (6�mm) �.95� �.�80 0.�68 0.��8 6.5�5 �.756 �.559 0.�18 PP051907506�

�" x 1½" �.5�� (90mm) x 1.969 (50mm) �.5�� 1.969 0.��� 0.181 6.850 �.150 �.��� 0.651 PP0519090050

�" x �" �.5�� (90mm) x �.�80 (6�mm) �.5�� �.�80 0.��� 0.��8 7.165 �.189 �.677 0.7�8 PP051909006�

�" x �½" �.5�� (90mm) x �.95� (75mm) �.5�� �.95� 0.��� 0.�68 7.�8� �.110 �.99� 0.660 PP0519090075

�" x �" �.��1 (110mm) x �.�80 (6�mm) �.��1 �.�80 0.�9� 0.��8 7.�8� �.�07 �.598 0.990 PP051911006�

�" x �½" �.��1 (110mm) x �.95� (75mm) �.��1 �.95� 0.�9� 0.�68 7.�8� �.�68 �.87� 1.0�� PP0519110075

�" x �" �.��1 (110mm) x �.5�� (90mm) �.��1 �.5�� 0.�9� 0.��� 7.�8� �.�07 �.150 1.166 PP0519110090

�½" x �" �.9�1 (1�5mm) x �.�80 (6�mm)) �.9�1 �.�80 0.��9 0.��8 7.87� �.58� �.110 1.��0 PP05191�506�

�½" x �" �.9�1 (1�5mm) x �.5�� (90mm) �.9�1 �.5�� 0.��9 0.��� 7.87� �.6�� �.189 1.�85 PP05191�5090

�½" x �" �.9�1 (1�5mm) x �.��1 (110mm) �.9�1 �.��1 0.��9 0.�9� 7.87� �.58� �.5�� 1.68� PP05191�5110

5" x �½" 5.51� (1�0mm) x �.95� (75mm) 5.51� �.95� 0.500 0.�68 9.055 �.6�� �.756 �.��9 PP05191�0075

5" x �" 5.51� (1�0mm) x �.5�� (90mm) 5.51� �.5�� 0.500 0.��� 9.055 �.6�� �.110 �.�6� PP05191�0090

5" x �" 5.51� (1�0mm) x �.��1 (110mm) 5.51� �.��1 0.500 0.�9� 9.055 �.567 �.5�� �.585 PP05191�0110

5" x �" 5.51� (1�0mm) x �.9�1 (1�5mm) 5.51� �.9�1 0.500 0.��9 9.�5� �.6�6 �.661 �.1�� PP05191�01�5

D1 D2

L1L2

L

S2S1

(Continued on Next Page)

Page 17: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

171.05�609

ChemicalProcess Piping Systems - Dimensional Data

Reducer: Concentric - Extended leg

Description: Reducer: Concentric - Extended Leg PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 10 / SDR 11

Nom. Actual OD D1 D2 S1 S2 L L1 L2 Weight Part

Size Size in in in in in in in lbs Number

6" x �" 6.�99 (160mm) x �.5�� (90mm) 6.�99 �.5�� 0.575 0.��� 9.76� �.8�� �.�68 �.706 PP0519160090

6" x �" 6.�99 (160mm) x �.��1 (110mm) 6.�99 �.��1 0.575 0.�9� 9.6�6 �.8�� �.701 �.9�6 PP0519160110

6" x �½" 6.�99 (160mm) x �.9�1 (1�5mm) 6.�99 �.9�1 0.575 0.��9 9.6�6 �.80� �.7�0 �.01� PP05191601�5

6" x 5" 6.�99 (160mm) x 5.51� (1�0mm) 6.�99 5.51� 0.575 0.500 10.��6 �.80� �.5�8 �.��� PP05191601�0

7" x �" 7.087 (180mm) x �.5�� (90mm) 7.087 �.5�� 0.6�6 0.��� 9.6�6 �.1�� �.110 �.�66 PP0519180090

7" x �" 7.087 (180mm) x �.��1 (110mm) 7.087 �.��1 0.6�6 0.�9� 10.6�0 �.88� �.701 �.67� PP0519180110

7" x �½" 7.087 (180mm) x �.9�1 (1�5mm) 7.087 �.9�1 0.6�6 0.��9 9.6�6 �.1�� �.��5 �.00� PP05191801�5

7" x 5" 7.087 (180mm) x 5.51� (1�0mm) 7.087 5.51� 0.6�6 0.500 10.6�0 �.9�1 �.�09 �.��� PP05191801�0

7" x 6" 7.087 (180mm) x 6.�99 (160mm) 7.087 6.�99 0.6�6 0.575 10.9�5 �.961 5.000 �.66� PP0519180160

8" x 5" 7.87� (�00mm) x 5.51� (1�0mm) 7.87� 5.51� 0.717 0.500 10.8�7 �.9�1 �.��1 5.016 PP0519�001�0

8" x 6" 7.87� (�00mm) x 6.�99 (160mm) 7.87� 6.�99 0.717 0.575 10.8�7 �.8�� �.80� 5.��6 PP0519�00160

8" x 7" 7.87� (�00mm) x 7.087 (180mm) 7.87� 7.087 0.717 0.6�6 10.709 �.961 �.6�6 5.85� PP0519�00180

9" x 6" 8.858 (��5mm) x 6.�99 (160mm) 8.858 6.�99 0.807 0.575 11.61� 5.��6 �.80� 6.710 PP0519��5160

9" x 7" 8.858 (��5mm) x 7.087 (180mm) 8.858 7.087 0.807 0.6�6 10.709 �.88� �.5�8 7.19� PP0519�55180

9" x 8" 8.858 (��5mm) x 7.87� (�00mm) 8.858 7.87� 0.807 0.717 10.709 �.961 �.7�� 7.700 PP0519�55�00

10" x 6" 9.8�� (�50mm) x 6.�99 (160mm 9.8�� 6.�99 0.89� 0.575 11.811 5.906 �.9�7 8.151 PP0519�50160

10" x 7" 9.8�� (�50mm) x 7.087 (180mm) 9.8�� 7.087 0.89� 0.6�6 11.61� 6.0�� �.17� 8.910 PP0519�50180

10" x 8" 9.8�� (�50mm) x 7.87� (�00mm) 9.8�� 7.87� 0.89� 0.717 1�.�0� 6.181 �.�88 9.6�6 PP0519�50�00

10" x 9" 9.8�� (�50mm) x 8.858 (��5mm) 9.8�� 8.858 0.89� 0.807 1�.071 6.1�� �.88� 10.670 PP0519�50��5

11" x 8" 11.0�� (�80mm) x 7.87� (�00mm) 11.0�� 7.87� 1.000 0.717 1�.110 5.51� �.�09 1�.870 PP0519�80�00

11" x 9" 11.0�� (�80mm) x 8.858 (��5mm) 11.0�� 8.858 1.000 0.807 1�.189 5.51� �.7�� 1�.�87 PP0519�80��5

11" x 10" 11.0�� (�80mm) x 9.8�� (�50mm) 11.0�� 9.8�� 1.000 0.89� 1�.�86 5.51� 5.118 1�.�88 PP0519�80�50

1�"x 9" 1�.�0� (�15mm) x 8.858 (��5mm) 1�.�0� 8.858 1.1�6 0.807 1�.�70 5.906 �.7�� 17.�80 PP0519�15��5

1�" x 10" 1�.�0� (�15mm) x 9.8�� (�50mm) 1�.�0� 9.8�� 1.1�6 0.89� 1�.�70 5.906 5.�76 17.8�0 PP0519�15�50

1�" x 11" 1�.�0� (�15mm) x 11.0�� (�80mm) 1�.�0� 11.0�� 1.1�6 1.000 1�.�70 5.906 5.�7� 19.�60 PP0519�15�80

D1 D2

L1L2

L

S2S1

Page 18: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

18

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

d1d2

L1

L2

L

S2

S1

PN 10 / SDR 11

Nominal Actual OD d1 d2 S1 S2 L L1 L2 Weight Part

Size Size in in in in in in in lbs Number

¾" x ½" 0.98� (�5mm) x 0.787 (�0mm) 0.98� 0.787 0.091 0.075 �.055 �.008 1.�96 0.0�� PP050�00�50�0

1" x ¾" 1.�60 (��mm) x 0.98� (�5mm) 1.�60 0.98� 0.11� 0.091 �.�88 �.�05 1.575 0.0�� PP050�00��0�5

1¼" x ¾" 1.575 (�0mm) x 0.98� (�5mm) 1.575 0.98� 0.1�6 0.091 �.961 �.�6� 1.575 0.088 PP050�00�00�5

1¼" x 1" 1.575 (�0mm) x 1.�60 (��mm) 1.575 1.�60 0.1�6 0.11� �.9�1 �.��� 1.7�� 0.088 PP050�00�00��

1½" x 1" 1.969 (50mm) x 1.�60 (��mm) 1.969 1.�60 0.181 0.11� 6.1�� �.795 1.77� 0.176 PP050�00500��

1½" x 1¼" 1.969 (50mm) x 1.575 (�0mm) 1.969 1.575 0.181 0.1�6 6.181 �.795 1.9�9 0.176 PP050�00500�0

�" x 1" �.�80 (6�mm) x 1.�60 (��mm) �.�80 1.�60 0.��8 0.11� 6.969 �.95� 1.77� 0.�6� PP050�006�0��

�" x 1¼" �.�80 (6�mm) x 1.575 (�0mm) �.�80 1.575 0.��8 0.1�6 6.969 �.99� 1.9�9 0.�08 PP050�006�0�0

�" x 1½" �.�80 (6�mm) x 1.969 (50mm) �.�80 1.969 0.��8 0.181 6.969 �.99� �.�05 0.��0 PP050�006�050

�½" x 1½" �.95� (75mm) x 1.969 (50mm) �.95� 1.969 0.�68 0.181 7.756 �.�07 �.��� 0.�6� PP050�0075050

�½" x �" �.95� (75mm) x �.�80 (6�mm) �.95� �.�80 0.�68 0.��8 7.756 �.�68 �.�80 0.550 PP050�007506�

�" x �" �.5�� (90mm) x �.�80 (6�mm) �.5�� �.�80 0.��� 0.��8 8.661 �.6�� �.5�0 0.79� PP050�009006�

�" x �½" �.5�� (90mm) x �.95� (75mm) �.5�� �.95� 0.��� 0.�68 8.58� �.661 �.756 0.858 PP050�0090075

�" x �" �.��1 (110mm) x �.�80 (6�mm) �.��1 �.�80 0.�9� 0.��8 9.7�� �.898 �.�80 1.�5� PP050�011006�

�" x �" �.��1 (110mm) x �.5�� (90mm) �.��1 �.5�� 0.�9� 0.��� 9.606 �.858 �.110 1.��0 PP050�0110090

�½" x �" �.9�1 (1�5mm) x �.�80 (6�mm)) �.9�1 �.�80 0.��9 0.��8 10.��� �.976 �.�80 1.760 PP050�01�506�

�½" x �" �.9�1 (1�5mm) x �.5�� (90mm) �.9�1 �.5�� 0.��9 0.��� 10.�7� �.�1� �.110 1.980 PP050�01�5090

�½" x �" �.9�1 (1�5mm) x �.��1 (110mm) �.9�1 �.��1 0.��9 0.�9� 10.��� �.17� �.��5 �.090 PP050�01�5110

5" x �" 5.51� (1�0mm) x �.9�1 (1�5mm) 5.51� �.9�1 0.500 0.��9 11.1�� �.��1 �.7�0 �.860 PP050�01�01�5

6" x �" 6.�99 (160mm) x �.5�� (90mm) 6.�99 �.5�� 0.575 0.��� 1�.165 �.6�6 �.110 �.��� PP050�0160090

6" x �" 6.�99 (160mm) x �.��1 (110mm) 6.�99 �.��1 0.575 0.�9� 1�.165 �.567 �.��5 �.5�� PP050�0160110

6" x �½" 6.�99 (160mm) x �.9�1 (1�5mm) 6.�99 �.9�1 0.575 0.��9 1�.165 �.606 �.6�� �.850 PP050�01601�5

6" x 5" 6.�99 (160mm) x 5.51� (1�0mm) 6.�99 5.51� 0.575 0.500 1�.1�6 �.606 �.898 �.1�6 PP050�01601�0

7" x �" 7.087 (180mm) x �.5�� (90mm) 7.087 �.5�� 0.6�6 0.��� 1�.701 5.079 �.110 �.86� PP050�0180090

7" x �½" 7.087 (180mm) x �.9�1 (1�5mm) 7.087 �.9�1 0.6�6 0.��9 1�.898 5.�5� �.701 5.��6 PP050�01801�5

7" x 6" 7.087 (180mm) x 6.�99 (160mm) 7.087 6.�99 0.6�6 0.575 1�.898 5.�5� �.1�� 5.896 PP050�0180160

8" x 6" 7.87� (�00mm) x 6.�99 (160mm) 7.87� 6.�99 0.717 0.575 1�.685 5.�7� �.1�� 7.�9� PP050�0��0160

8" x 7" 7.87� (�00mm) x 7.087 (180mm) 7.87� 7.087 0.717 0.6�6 1�.685 5.669 �.�09 8.1�0 PP050�0�00180

9" x 6" 8.858 (��5mm) x 6.�99 (160mm) 8.858 6.�99 0.807 0.575 15.9�5 6.10� �.055 9.61� PP050�0��5160

9" x 7" 8.858 (��5mm) x 7.087 (180mm) 8.858 7.087 0.807 0.6�6 15.866 6.10� �.�70 9.900 PP050�0��5180

9" x 8" 8.858 (��5mm) x 7.87� (�00mm) 8.858 7.87� 0.807 0.717 15.866 6.1�� �.6�6 10.8�6 PP050�0��5�00

10" x 8" 9.8�� (�50mm) x 8.858 (��5mm) 9.8�� 8.858 0.89� 0.807 17.��� 6.850 5.000 1�.�76 PP050�0�50��5

Reducer: Eccentric - Extended leg

Description: Reducer: Eccentric - Extended Leg PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

Page 19: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

191.05�609

ChemicalProcess Piping Systems - Dimensional Data

Description: Stub Ends PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

Stub Ends

PN 10 / SDR 11

Nominal Actual OD D S D3 D4 H1 h4 z1 Weight Part

Size Size in in in in in in in lbs Number

½" 0.787 (�0mm) 0.787 0.075 1.0�� 1.7�� 0.�76 0.787 1.969 0.0�0 PP05060�0

¾" 0.98� (�5mm) 0.98� 0.091 1.�60 �.1�6 0.�5� 0.787 1.969 0.068 PP05060�5

1" 1.�60 (��mm) 1.�60 0.11� 1.5�5 �.�80 0.�9� 0.787 1.969 0.099 PP05060��

1¼" 1.575 (�0mm) 1.575 0.1�6 1.890 �.87� 0.��� 0.787 1.969 0.156 PP05060�0

1½" 1.969 (50mm) 1.969 0.181 �.�6� �.��8 0.�7� 0.787 1.969 0.198 PP0506050

�" �.�80 (6�mm) �.�80 0.��8 �.87� �.9�7 0.591 0.906 �.�05 0.�97 PP050606�

�½" �.95� (75mm) �.95� 0.�68 �.��5 �.7�� 0.6�0 0.8�7 �.165 0.�66 PP0506075

�" �.5�� (90mm) �.5�� 0.��� �.055 5.��6 0.709 1.890 �.�68 0.700 PP0506090

�" �.��1 (110mm) �.��1 0.�9� �.961 6.�60 0.7�8 1.65� �.�07 1.01� PP0506110

�½" �.9�1 (1�5mm) �.9�1 0.��9 5.��6 6.�60 1.0�� 1.�96 �.50� 1.107 PP05061�5

5" 5.51� (1�0mm) 5.51� 0.500 6.10� 7.�0� 0.98� 1.�99 �.�68 1.595 PP05061�0

6" 6.�99 (160mm) 6.�99 0.575 6.9�9 8.�86 0.98� 1.�99 �.189 �.0�� PP0506160

7" 7.087 (180mm) 7.087 0.6�6 7.1�6 8.�86 1.181 �.0�7 �.�68 �.057 PP0506180

8" 7.87� (�00mm) 7.87� 0.717 9.17� 10.551 1.�99 �.165 �.8�� �.675 PP0506�00

9" 8.858 (��5mm) 8.858 0.807 9.�5� 10.591 1.�99 �.�05 �.76� �.65� PP0506��5

10" 9.8�� (�50mm) 9.8�� 0.89� 11.��0 1�.598 1.�78 �.008 �.76� 6.710 PP0506�50

11" 11.0�� (�80mm) 11.0�� 1.000 11.�96 1�.6�8 1.�78 �.717 �.685 6.5�� PP0506�80

1�" 1�.�0� (�15mm) 1�.�0� 1.1�6 1�.��8 1�.685 1.�17 �.�86 6.7�� 9.�9� PP0506�15

1�" 1�.976 (�55mm) 1�.976 1.�68 1�.7�� 16.969 1.61� �.701 7.�8� 1�.�08 PP0506�55

16" 15.7�8 (�00mm) 15.7�8 1.��9 16.811 19.016 1.811 �.1�� 7.717 18.�60 PP0506�00

18" 17.717 (�50mm) 17.717 1.610 �0.��6 ��.110 �.�6� �.5�0 5.551 �0.�60 PP0506�50

�0" 19.685 (500mm) 19.685 1.787 �0.866 ��.110 �.�0� �.��1 5.��� �0.0�1 PP0506500

��" ��.0�7 (560mm) ��.0�7 �.000 ��.�1� �6.969 �.�6� �.�6� 5.51� �5.��0 PP0506560

D3 D D4

h4H1

z1

S

Page 20: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

�0

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Stub End - Extended leg

Description: Stub End - Extended Leg PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD D S D3 D4 H1 h4 z1 Weight Part

Size Size in in in in in in in lbs Number

½" 0.787 (�0mm) 0.787 0.075 1.06� 1.7�� 0.�76 1.�57 �.��6 0.0�� PP05�800�0

¾" 0.98� (�5mm) 0.98� 0.091 1.�99 �.1�6 0.�5� 1.575 �.��6 0.088 PP05�800�5

1" 1.�60 (��mm) 1.�60 0.11� 1.575 �.�80 0.�9� 1.7�� �.��6 0.1�0 PP05�800��

1¼" 1.575 (�0mm) 1.575 0.1�6 1.969 �.87� 0.��� 1.9�9 �.��6 0.187 PP05�800�0

1½" 1.969 (50mm) 1.969 0.181 �.�0� �.�68 0.�7� �.165 �.09� 0.�99 PP05�80050

�" �.�80 (6�mm) �.�80 0.��8 �.95� �.976 0.551 �.�80 �.7�� 0.�66 PP05�8006�

�½" �.95� (75mm) �.95� 0.�68 �.50� �.�70 0.6�0 �.756 5.118 0.70� PP05�80075

�" �.5�� (90mm) �.5�� 0.��� �.1�� �.7�� 0.669 �.110 5.51� 1.056 PP05�80090

�" �.��1 (110mm) �.��1 0.�9� �.961 6.�99 0.7�8 �.��9 6.�96 1.��0 PP05�80110

�½" �.9�1 (1�5mm) �.9�1 0.��9 5.197 6.��0 0.98� 5.�5� 7.�0� �.156 PP05�801�5

5" 5.51� (1�0mm) 5.51� 0.500 6.10� 7.�0� 0.98� 5.079 7.87� �.68� PP05�801�0

6" 6.�99 (160mm) 6.�99 0.575 6.9�9 8.�86 1.0�� 5.�76 7.�6� �.5�0 PP05�80160

7" 7.087 (180mm) 7.087 0.6�6 7.087 8.��6 1.181 5.��6 7.87� �.916 PP05�80180

8" 7.87� (�00mm) 7.87� 0.717 9.17� 10.591 1.�99 5.000 7.91� 6.6�� PP05�80�00

9" 8.858 (��5mm) 8.858 0.807 9.��1 10.6�0 1.�99 5.118 8.0�1 7.0�0 PP05�80��5

10" 9.8�� (�50mm) 9.8�� 0.89� 11.��0 1�.598 1.�78 5.51� 8.661 10.560 PP05�80�50

11" 11.0�� (�80mm) 11.0�� 1.000 11.5�5 1�.677 1.�17 5.709 9.09� 11.�85 PP05�80�80

1�" 1�.�0� (�15mm) 1�.�0� 1.1�6 1�.189 1�.606 1.�17 6.10� 9.606 15.88� PP05�80�15

D3 D D4

h4

H1

z1

S

Page 21: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�11.05�609

ChemicalProcess Piping Systems - Dimensional Data

Backing Ring

Description: Backing Ring 150 lbs. ANSI Drilling

Material: Glass Filled Polypropylene with Steel Core

Execution: Molded

Nominal B D D2 d6 K # Weight SIMTECH

Size in in in in in Holes lbs Part #

½" 0.�7� �.50� 0.6�0 1.��0 �.�6� � 0.�8� PP990700�0

¾" 0.�7� �.858 0.6�0 1.�19 �.756 � 0.660 PP990700�5

1" 0.6�0 �.�5� 0.6�0 1.6�� �.110 � 0.970 PP990700��

1¼" 0.6�0 �.606 0.6�0 1.988 �.50� � 1.188 PP990700�0

1½" 0.709 5.000 0.6�0 �.��1 �.858 � 1.�5� PP99070050

�" 0.709 5.98� 0.7�8 �.051 �.76� � 1.78� PP9907006�

�½" 0.709 7.008 0.7�8 �.�8� 5.51� � �.�18 PP99070075

�" 0.709 7.�80 0.7�8 �.�5� 5.98� 8 �.��0 PP99070090

�" & �½" 0.709 9.016 0.7�8 5.0�9 7.5�0 8 �.0�8 PP99070110

6" & 7" 0.9�5 11.0�� 0.87� 7.1�6 9.�88 8 6.��5 PP99070160

8" & 9" 0.9�5 1�.50� 0.87� 9.�70 11.7�� 8 10.�56 PP99070�00

10" & 11" 1.181 15.98� 1.000 11.516 1�.�5� 1� 1�.6�8 PP99070�50

1�" 1.��9 19.016 1.000 1�.�87 17.008 1� �6.��� PP99070�15

1�" 1.65� �0.98� 1.1�� 1�.78� 18.7�0 16 ��.5�0 PP99070�55

16" 1.7�� ��.50� 1.1�� 16.890 �1.�60 16 �8.7�0 PP99070�00

D2

D

B

d6

K

Page 22: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

��

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Caps: Dome

Description: End Caps PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD D S L Weight Part

Size Size in in in lbs Number

½" 0.787 (�0mm) 0.787 0.075 1.811 0.01� PP05�100�0

¾" 0.98� (�5mm) 0.98� 0.091 1.969 0.0�� PP05�100�5

1" 1.�60 (��mm) 1.�60 0.11� �.165 0.0�7 PP05�100��

1¼" 1.575 (�0mm) 1.575 0.1�6 �.�0� 0.06� PP05�100�0

1½" 1.969 (50mm) 1.969 0.181 �.756 0.11� PP05�10050

�" �.�80 (6�mm) �.�80 0.��8 �.��8 0.�07 PP05�1006�

�½" �.95� (75mm) �.95� 0.�68 �.6�� 0.��� PP05�10075

�" �.5�� (90mm) �.5�� 0.��� �.1�� 0.506 PP05�10090

�" �.��1 (110mm) �.��1 0.�9� �.7�� 0.880 PP05�10110

�½" �.9�1 (1�5mm) �.9�1 0.��9 �.961 1.195 PP05�101�5

5" 5.51� (1�0mm) 5.51� 0.500 5.�5� 1.6�1 PP05�101�0

6" 6.�99 (160mm) 6.�99 0.575 5.906 �.�98 PP05�10160

7" 7.087 (180mm) 7.087 0.6�6 6.�99 �.168 PP05�10180

8" 7.87� (�00mm) 7.87� 0.717 6.890 �.158 PP05�10�00

9" 8.858 (��5mm) 8.858 0.807 7.87� 5.676 PP05�10��5

10" 9.8�� (�50mm) 9.8�� 0.89� 8.071 5.9�0 PP05�10�50

11" 11.0�� (�80mm) 11.0�� 1.000 9.�5� 6.8�0 PP05�10�80

1�" 1�.�0� (�15mm) 1�.�0� 1.1�6 10.0�9 1�.5�0 PP05�10�15

1�" 1�.976 (�55mm) 1�.976 1.�68 11.0�� �0.0�0 PP05�10�55

16" 15.7�8 (�00mm) 15.7�8 1.��9 1�.�05 �6.8�0 PP05�10�00

D

S

L

Page 23: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

��1.05�609

ChemicalProcess Piping Systems - Dimensional Data

Caps: Flat

Description: End Caps PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Machined

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD D S L L1 Weight Part

Size Size in in in in lbs Number

10" 9.8�� (�50mm) 9.8�� 0.89� 1.969 1.�57 �.0�8 PP05090�50

11" 11.0�� (�80mm) 11.0�� 1.000 �.165 1.6�� 5.6�� PP05090�80

1�" 1�.�0� (�15mm) 1�.�0� 1.1�6 �.�6� 1.8�1 7.9�0 PP05090�15

1�" 1�.976 (�55mm) 1�.976 1.�68 �.559 �.067 11.088 PP05090�55

16" 15.7�8 (�00mm) 15.7�8 1.��9 �.756 �.��� 15.6�� PP05090�00

18" 17.717 (�50mm) 17.717 1.610 �.150 �.618 ��.��0 PP05090�50

�0" 19.685 (500mm) 19.685 1.787 �.��6 �.9�� �0.800 PP05090500

D

S

LL1

Page 24: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

��

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

lateral: 45°

Description: Lateral: 45° PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Fabricated

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD D S L2 z2 z3 Weight Part

Size Size in in in in in lbs Number

�" �.��1 (110mm) �.��1 0.�9� �0.079 16.9�9 �.150 16.9�9 PP05170110

�½" �.9�1 (1�5mm) �.9�1 0.��9 �1.65� 17.717 �.9�7 17.717 PP051701�5

5" 5.51� (1�0mm) 5.51� 0.500 ��.��8 18.50� �.7�� 18.50� PP051701�0

6" 6.�99 (160mm) 6.�99 0.575 �8.7�0 19.685 9.055 19.685 PP05170160

7" 7.087 (180mm) 7.087 0.6�6 �0.709 �0.866 9.8�� �0.866 PP05170180

8" 7.87� (�00mm) 7.87� 0.717 ��.677 �1.65� 11.0�� �1.65� PP05170�00

9" 8.858 (��5mm) 8.858 0.807 ��.6�6 ��.8�5 11.811 ��.8�5 PP05170��5

10" 9.8�� (�50mm) 9.8�� 0.89� �7.008 ��.016 1�.99� ��.016 PP05170�50

11" 11.0�� (�80mm) 11.0�� 1.000 �9.�70 �5.591 1�.780 �5.591 PP05170�80

1�" 1�.�0� (�15mm) 1�.�0� 1.1�6 ��.�07 �7.559 15.7�8 �7.559 PP05170�15

1�" 1�.976 (�55mm) 1�.976 1.�68 50.�9� ��.�65 16.9�9 ��.�65 PP05170�55

16" 15.7�8 (�00mm) 15.7�8 1.��9 5�.150 �5.��� 17.717 �5.��� PP05170�00

18" 17.717 (�50mm) 17.717 1.610 56.�99 �7.�0� 18.898 �7.�0� PP05170�50

�0" 19.685 (500mm) 19.685 1.787 59.055 �9.�70 19.685 �9.�70 PP05170500

D

D

S

L2

z2

z3 z2

45°

Page 25: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�51.05�609

ChemicalProcess Piping Systems - Dimensional Data

PN 10 / SDR 11

Nominal Actual OD d s L2 z2 z3 Weight Part

Size Size in in in in in lbs Number

�" �.��1 (110mm) �.��1 0.�9� 19.685 1�.795 6.890 5.1�8 PP05165110

�½" �.9�1 (1�5mm) �.9�1 0.��9 �1.�57 1�.976 7.�80 7.��8 PP051651�5

5" 5.51� (1�0mm) 5.51� 0.500 ��.87� 1�.055 8.819 9.5�8 PP051651�0

6" 6.�99 (160mm) 6.�99 0.575 �5.�76 16.��0 9.055 1�.6�0 PP05165160

7" 7.087 (180mm) 7.087 0.6�6 �7.559 17.717 9.8�� 18.656 PP05165180

8" 7.87� (�00mm) 7.87� 0.717 �9.88� 19.17� 10.709 ��.6�0 PP05165�00

9" 8.858 (��5mm) 8.858 0.807 ��.677 �0.866 11.811 ��.100 PP05165��5

10" 9.8�� (�50mm) 9.8�� 0.89� �5.6�0 ��.8�5 1�.795 �5.760 PP05165�50

11" 11.0�� (�80mm) 11.0�� 1.000 �9.17� ��.80� 1�.�70 6�.�60 PP05165�80

1�" 1�.�0� (�15mm) 1�.�0� 1.1�6 ��.91� �7.165 15.7�8 85.�60 PP05165�15

1�" 1�.976 (�55mm) 1�.976 1.�68 �5.�7� �8.7�0 16.7�� 11�.�00 PP05165�55

16" 15.7�8 (�00mm) 15.7�8 1.��9 �9.�1� �1.�96 17.717 155.760 PP05165�00

18" 17.717 (�50mm) 17.717 1.610 5�.165 ��.�65 18.701 �07.0�0 PP05165�50

�0" 19.685 (500mm) 19.685 1.787 55.118 �5.��� 19.685 �1�.�1� PP05165500

lateral: 60°

Description: Lateral: 60° PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Fabricated

Connection: Butt Fusion

D

D

S

L2

z2

z3 z2

45°

Page 26: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

�6

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Male adapter - Extended leg

Description: Threaded Male Adapter - Extended Leg PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD D S A D2 L Le sw Weight Part

Size Size in in in in in in in lbs Number

½" 0.787 (�0mm) 0.787 0.075 0.551 0.51� �.�8� 1.61� 0.9�5 0.0�0 PP051�00�0

¾" 0.98� (�5mm) 0.98� 0.091 0.551 0.709 �.�0� 1.61� 1.06� 0.0�9 PP051�00�5

1" 1.�60 (��mm) 1.�60 0.11� 0.709 0.906 �.717 1.7�� 1.�17 0.0�8 PP051�00��

1¼" 1.575 (�0mm) 1.575 0.1�6 0.7�8 1.1�� �.95� 1.9�9 1.811 0.08� PP051�00�0

1½" 1.969 (50mm) 1.969 0.181 0.787 1.��9 �.��8 �.165 �.165 0.1�8 PP051�0050

�" �.�80 (6�mm) �.�80 0.��8 0.8�7 1.77� �.58� �.�80 �.165 0.�11 PP051�006�

D

Le

S

D2sw

AL

Page 27: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�71.05�609

ChemicalProcess Piping Systems - Dimensional Data

Female adapter - Extended leg

Description: Threaded Female Adapter - Extended Leg PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD D S A sw L Le Weight Part

Size Size in in in in in in lbs Number

½" 0.787 (�0mm) 0.787 0.075 0.6�0 1.181 �.�8� 1.61� 0.0�5 PP051�00�0

¾" 0.98� (�5mm) 0.98� 0.091 0.709 1.�17 �.�80 1.61� 0.0�8 PP051�00�5

1" 1.�60 (��mm) 1.�60 0.11� 0.8�7 1.811 �.795 1.7�� 0.088 PP051�00��

1¼" 1.575 (�0mm) 1.575 0.1�6 0.906 �.165 �.110 1.9�9 0.1�8 PP051�00�0

1½" 1.969 (50mm) 1.969 0.181 0.9�5 �.��1 �.�07 �.165 0.17� PP051�0050

�" �.�80 (6�mm) �.�80 0.��8 1.1�� �.95� �.819 �.�80 0.��8 PP051�006�

D

Le

S

sw

A

L

Page 28: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

�8

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Union - EPDM - Extended leg

Description: Union with EPDM O-Ring - Extended Leg PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD d S D L Le1 Le2 Weight Part

Size Size in in in in in in lbs Number

½" 0.787 (�0mm) 0.787 0.075 1.811 �.1�� 0.9�5 1.�57 0.1�1 PP05�600�0

¾" 0.98� (�5mm) 0.98� 0.091 �.�05 �.��1 0.9�5 1.�96 0.187 PP05�600�5

1" 1.�60 (��mm) 1.�60 0.11� �.�80 �.6�6 0.9�5 1.5�5 0.�51 PP05�600��

1¼" 1.575 (�0mm) 1.575 0.1�6 �.0�1 �.8�� 0.9�5 1.61� 0.��9 PP05�600�0

1½" 1.969 (50mm) 1.969 0.181 �.�65 5.079 0.9�5 1.7�� 0.601 PP05�60050

�" �.�80 (6�mm) �.�80 0.��8 �.�1� 5.�15 0.9�5 1.7�� 0.990 PP05�6006�

LLe2 Le1

dDs

Page 29: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�91.05�609

ChemicalProcess Piping Systems - Dimensional Data

Union - VITon - Extended leg

Description: Union with Viton O-Ring - Extended Leg PN10 / SDR 11 - 150psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 10 / SDR 11

Nominal Actual OD d S D L Le1 Le2 Weight Part

Size Size in in in in in in lbs Number

½" 0.787 (�0mm) 0.787 0.075 1.811 �.1�� 0.9�5 1.�57 0.1�1 PP05�600�0

¾" 0.98� (�5mm) 0.98� 0.091 �.�05 �.��1 0.9�5 1.�96 0.187 PP05�600�5

1" 1.�60 (��mm) 1.�60 0.11� �.�80 �.6�6 0.9�5 1.5�5 0.�51 PP05�600��

1¼" 1.575 (�0mm) 1.575 0.1�6 �.0�1 �.8�� 0.9�5 1.61� 0.��9 PP05�600�0

1½" 1.969 (50mm) 1.969 0.181 �.�65 5.079 0.9�5 1.7�� 0.601 PP05�60050

�" �.�80 (6�mm) �.�80 0.��8 �.�1� 5.�15 0.9�5 1.7�� 0.990 PP05�6006�

LLe2 Le1

dDs

Page 30: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

�0

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

90psi Dimensional Data

Page 31: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�11.05�609

ChemicalProcess Piping Systems - Dimensional Data

PRESSURE PIPE

Description: Pressure Pipe PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Extruded, Stress Relieved

Connection: Butt Fusion

PN 6 / SRD 17.6

Nomnial Actual OD D S Weight Weight Part

Size Size in in (lbs./ m) Lbs. Foot Number

¾" 0.98� (�5mm) 0.98� 0.071 0.�90 0.091 PP0�0000�5

1" 1.�60 (��mm) 1.�60 0.071 0.�78 0.118 PP0�0000��

1¼" 1.575 (�0mm) 1.575 0.091 0.601 0.188 PP0�0000�0

1½" 1.969 (50mm) 1.969 0.11� 0.9�8 0.�90 PP0�000050

�" �.�80 (6�mm) �.�80 0.1�� 1.�50 0.�5� PP0�00006�

�½" �.95� (75mm) �.95� 0.169 �.057 0.6�� PP0�000075

�" �.5�� (90mm) �.5�� 0.�01 �.9�6 0.91� PP0�000090

�" �.��1 (110mm) �.��1 0.��8 �.�78 1.�68 PP0�000110

�½" �.9�1 (1�5mm) �.9�1 0.�80 5.610 1.75� PP0�0001�5

5" 5.51� (1�0mm) 5.51� 0.�15 7.0�0 �.�00 PP0�0001�0

6" 6.�99 (160mm) 6.�99 0.�58 9.17� �.867 PP0�000160

7" 7.087 (180mm) 7.087 0.�0� 11.550 �.609 PP0�000180

8" 7.87� (�00mm) 7.87� 0.��9 1�.�00 �.�69 PP0�000�00

9" 8.858 (��5mm) 8.858 0.50� 18.018 5.6�1 PP0�000��5

10" 9.8�� (�50mm) 9.8�� 0.559 ��.��0 6.9�� PP0�000�50

11" 11.0�� (�80mm) 11.0�� 0.6�6 �7.7�0 8.66� PP0�000�80

1�" 1�.�0� (�15mm) 1�.�0� 0.705 �5.�00 11.000 PP0�000�15

1�" 1�.976 (�55mm) 1�.976 0.791 ��.660 1�.956 PP0�000�55

16" 15.7�8 (�00mm) 15.7�8 0.89� 56.5�0 17.669 PP0�000�00

18" 17.717 (�50mm) 17.717 1.00� 71.500 ��.��� PP0�000�50

�0" 19.685 (500mm) 19.685 1.118 88.��0 �7.6�8 PP0�000500

��" ��.0�7 (560mm) ��.0�7 1.��8 110.660 ��.581 PP0�000560

��" ��.80� (6�0mm) ��.80� 1.�06 1�0.1�0 ��.79� PP0�0006�0

�8" �7.95� (710mm) �7.95� 1.58� 177.760 55.550 PP0�000710

�0" �1.�96 (800mm) �1.�96 1.78� ��5.7�0 70.5�7 PP0�000800

D

S

Page 32: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

��

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Description: Elbow: 90° PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

Elbow: 90°

PN6 / SDR 17.6

Nomnial Actual OD D S Le Z Weight Part

Size Size in in in in lbs Number

1½" 1.969 (50mm) 1.969 0.11� 0.�76 �.087 0.095 PP0�010050

�" �.�80 (6�mm) �.�80 0.1�� 0.�76 �.598 0.180 PP0�01006�

�½" �.95� (75mm) �.95� 0.169 0.��� �.150 0.�08 PP0�010075

�" �.5�� (90mm) �.5�� 0.�01 0.��� �.7�0 0.�55 PP0�010090

�" �.��1 (110mm) �.��1 0.��8 0.�7� �.5�8 0.8�5 PP0�010110

�½" �.9�1 (1�5mm) �.9�1 0.�80 0.669 5.118 1.��1 PP0�0101�5

5" 5.51� (1�0mm) 5.51� 0.�15 0.591 5.709 1.650 PP0�0101�0

6" 6.�99 (160mm) 6.�99 0.�58 0.�15 6.�96 �.57� PP0�010160

7" 7.087 (180mm) 7.087 0.�0� 0.591 7.��� �.5�0 PP0�010180

8" 7.87� (�00mm) 7.87� 0.��9 0.7�8 8.110 5.10� PP0�010�00

9" 8.858 (��5mm) 8.858 0.50� 0.�9� 9.09� 7.0�0 PP0�010��5

10" 9.8�� (�50mm) 9.8�� 0.559 0.787 10.079 9.�7� PP0�010�50

11" 11.0�� (�80mm) 11.0�� 0.6�6 0.9�5 11.�17 1�.89� PP0�010�80

1�" 1�.�0� (�15mm) 1�.�0� 0.705 0.866 1�.756 18.568 PP0�010�15

1�" 1�.976 (�55mm) 1�.976 0.791 1.�96 15.157 �9.�60 PP0�010�55

16" 15.7�8 (�00mm) 15.7�8 0.89� 1.61� 17.��� �1.019 PP0�010�00

Z

D

Le

S

r=d

Page 33: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

��1.05�609

ChemicalProcess Piping Systems - Dimensional Data

Elbow 90° - Extended leg

Description: Elbow 90° - Extended Leg PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 6 / SDR 17.6

Nominal Actual OD D S Le Z Weight Part

Size Size in in in in lbs Number

1½" 1.969 (50mm) 1.969 0.11� �.150 �.�09 0.�6� PP0�150050

�" �.�80 (6�mm) �.�80 0.1�� �.150 �.567 0.�18 PP0�15006�

�½" �.95� (75mm) �.95� 0.169 �.�65 5.157 0.6�8 PP0�150075

�" �.5�� (90mm) �.5�� 0.��0 �.�65 5.6�0 0.968 PP0�150090

�" �.��1 (110mm) �.��1 0.��8 �.858 6.�99 1.68� PP0�150110

�½" �.9�1 (1�5mm) �.9�1 0.�80 �.9�7 6.890 1.91� PP0�1501�5

5" 5.51� (1�0mm) 5.51� 0.�15 �.7�� 7.87� �.68� PP0�1501�0

6" 6.�99 (160mm) 6.�99 0.�58 5.��� 5.�15 �.9�8 PP0�150160

7" 7.087 (180mm) 7.087 0.�0� 5.��� 5.709 6.�79 PP0�150180

8" 7.87� (�00mm) 7.87� 0.��9 5.906 6.�96 8.888 PP0�150�00

9" 8.858 (��5mm) 8.858 0.50� 5.906 11.0�� 11.869 PP0�150��5

10" 9.8�� (�50mm) 9.8�� 0.559 5.118 11.61� 1�.618 PP0�150�50

11" 11.0�� (�80mm) 11.0�� 0.6�6 5.51� 1�.795 19.008 PP0�150�80

1�" 1�.�0� (�15mm) 1�.�0� 0.705 5.906 1�.76� �5.��� PP0�150�15

Z

D

Le

S

Page 34: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

��

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Elbow 45° - Extended leg

Description: Elbow 45° - Extended Leg PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 6 / SDR 17.6

Nominal Actual OD D S Le Z Weight Part

Size Size in in in in lbs Number

1½" 1.969 (50mm) 1.969 0.11� �.��1 �.�5� 0.�09 PP0�160050

�" �.�80 (6�mm) �.�80 0.1�� �.598 �.5�8 0.�59 PP0�16006�

�½" �.95� (75mm) �.95� 0.169 �.795 5.118 0.��1 PP0�160075

�" �.5�� (90mm) �.5�� 0.�01 �.��8 5.51� 0.7�7 PP0�160090

�" �.��1 (110mm) �.��1 0.��8 �.661 6.�99 1.�10 PP0�160110

�½" �.9�1 (1�5mm) �.9�1 0.�80 �.7�0 6.69� 1.7�8 PP0�1601�5

5" 5.51� (1�0mm) 5.51� 0.�15 �.7�� 7.95� �.1�� PP0�1601�0

6" 6.�99 (160mm) 6.�99 0.�58 5.6�0 9.055 �.817 PP0�160160

7" 7.087 (180mm) 7.087 0.�0� �.8�� 9.��9 5.159 PP0�160180

8" 7.87� (�00mm) 7.87� 0.��9 5.98� 10.��6 6.86� PP0�160�00

9" 8.858 (��5mm) 8.858 0.50� 6.0�� 10.8�7 8.580 PP0�160��5

10" 9.8�� (�50mm) 9.8�� 0.559 5.��6 11.�96 10.9�� PP0�160�50

11" 11.0�� (�80mm) 11.0�� 0.6�6 5.591 1�.598 15.686 PP0�160�80

1�" 1�.�0� (�15mm) 1�.�0� 0.705 6.06� 1�.567 �1.1�0 PP0�160�15

Z

D

Le

ZLeS

Page 35: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�51.05�609

ChemicalProcess Piping Systems - Dimensional Data

Tee

Description: Tee PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN6 / SDR 17.6

Nominal Actual OD D S L L1 Z Weight Part

Size Size in in in in in lbs Number

1½" 1.969 (50mm) 1.969 0.11� �.9�7 0.�7� 1.969 0.198 PP0�0�0050

�" �.�80 (6�mm) �.�80 0.1�� 5.0�9 0.6�0 �.677 0.�87 PP0�0�006�

�½" �.95� (75mm) �.95� 0.169 5.906 0.7�8 �.99� 0.66� PP0�0�0075

�" �.5�� (90mm) �.5�� 0.�01 7.�05 1.5�5 �.9�7 0.968 PP0�0�0090

�" �.��1 (110mm) �.��1 0.��8 10.0�9 �.165 5.157 �.156 PP0�0�0110

�½" �.9�1 (1�5mm) �.9�1 0.�80 9.8�� 1.969 5.118 �.56� PP0�0�01�5

5" 5.51� (1�0mm) 5.51� 0.�15 1�.�6� �.�6� 6.�99 �.0�8 PP0�0�01�0

6" 6.�99 (160mm) 6.�99 0.�58 1�.5�0 �.165 6.�17 5.�58 PP0�0�0160

7" 7.087 (180mm) 7.087 0.�0� 16.9�9 �.6�� 8.5�� 9.0�� PP0�0�0180

8" 7.87� (�00mm) 7.87� 0.��9 17.1�6 �.�65 8.�65 11.176 PP0�0�0�00

9" 8.858 (��5mm) 8.858 0.50� 17.717 �.8�5 8.9�7 15.00� PP0�0�0��5

10" 9.8�� (�50mm) 9.8�� 0.559 17.6�8 �.5�0 8.819 16.500 PP0�0�0�50

11" 11.0�� (�80mm) 11.0�� 0.6�6 �0.669 �.��8 10.�15 ��.�00 PP0�0�0�80

1�" 1�.�0� (�15mm) 1�.�0� 0.705 ��.�8� �.��8 11.1�� �0.800 PP0�0�0�15

1�" 1�.976 (�55mm) 1�.976 0.791 �7.��� �.9�7 1�.58� �6.�00 PP0�0�0�55

16" 15.7�8 (�00mm) 15.7�8 0.89� �8.5�� �.016 1�.��9 57.�00 PP0�0�0�00

ZD

L1

L

S

Page 36: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

�6

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Tee: Reduced

Description: Tee: Reduced PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 6 / SDR 17.6

Nominal Actual OD D1 d2 S1 S2 L L1 L2 z1 z2 Weight Part

Size Size in in in in in in in in in lbs Number

�" x 1" �.5�� (90mm) x 1.�60 (��mm) �.5�� 1.�60 0.�01 0.071 7.99� �.087 0.906 �.016 �.��6 0.68� PP0�0�0900��

�" x 1" �.��1 (110mm) x 1.�60 (��mm) �.��1 1.�60 0.��8 0.071 9.�1� �.598 0.866 �.606 �.58� 1.��� PP0�0�1100��

�" x 1½" �.��1 (110mm) x 1.969 (50mm) �.��1 1.969 0.��8 0.11� 9.��9 �.598 1.06� �.606 �.976 1.�7� PP0�0�110050

�½" x �" �.9�1 (1�5mm) x �.�80 (6�mm) �.9�1 �.�80 0.�80 0.1�� 10.0�9 �.1�6 0.98� 5.000 �.�1� �.��� PP0�0�1�506�

�½" x �" �.9�1 (1�5mm) x �.5�� (90mm) �.9�1 �.5�� 0.�80 0.�01 10.�9� 1.77� 1.65� 5.197 �.8�� �.66� PP0�0�1�5090

5" x �" 5.51� (1�0mm) x �.�80 (6�mm) 5.51� �.�80 0.�15 0.1�� 11.�57 �.�68 1.�60 5.7�8 �.7�� �.8�8 PP0�0�1�006�

5" x �" 5.51� (1�0mm) x �.5�� (90mm) 5.51� �.5�� 0.�15 0.�01 11.�57 �.189 1.�78 5.7�8 �.7�� �.9�8 PP0�0�1�0090

5" x �½" 5.51� (1�0mm) x �.95� (75mm) 5.51� �.95� 0.�15 0.169 11.�57 �.189 1.61� 5.7�8 5.118 �.�76 PP0�0�1�0075

5" x �" 5.51� (1�0mm) x �.��1 (110mm) 5.51� �.��1 0.�15 0.��8 11.�57 1.969 1.7�� 5.7�8 5.51� �.960 PP0�0�1�0110

5" x �½" 5.51� (1�0mm) x �.9�1 (1�5mm) 6.�99 �.9�1 0.�58 0.�80 1�.�0� �.�8� 1.850 6.��0 5.906 �.8�8 PP0�0�1601�5

6" x �" 6.�99 (160mm) x �.�80 (6�mm) 7.087 �.��1 0.�0� 0.��8 1�.701 �.9�1 1.181 6.850 5.51� 5.1�8 PP0�0�18006�

6" x �½" 6.�99 (160mm) x �.95� (75mm) 7.087 �.�80 0.�0� 0.1�� 1�.701 �.�09 1.181 6.850 6.�99 �.6�� PP0�0�180075

7" x �" 7.087 (180mm) x �.��1 (110mm) 7.087 �.95� 0.�0� 0.169 1�.701 �.6�� 1.969 6.850 5.906 �.�00 PP0�0�180110

8" x �" 7.87� (�00mm) x �.�80 (6�mm) 7.87� 6.�99 0.��9 0.�58 15.0�9 5.6�0 1.��0 7.5�0 5.709 7.788 PP0�0��0006�

8" x �" 7.87� (�00mm) x �.5�� (90mm) 7.87� �.�80 0.��9 0.1�� 15.�5� �.961 1.575 7.5�0 6.�78 6.8�0 PP0�0��00090

8" x �" 7.87� (�00mm) x �.��1 (110mm) 7.87� �.5�� 0.��9 0.�01 15.�5� �.80� 1.575 7.5�0 6.�99 6.996 PP0�0��00110

8" x �½" 7.87� (�00mm) x �.9�1 (1�5mm) 7.87� �.��1 0.��9 0.��8 15.�5� �.�88 1.69� 7.5�0 �.9�1 7.1�8 PP0�0��001�5

8" x 6" 7.87� (�00mm) x 6.�99 (160mm) 7.87� �.9�1 0.��9 0.�80 15.�5� �.858 �.�6� 7.87� 7.087 7.6�� PP0�0��00160

10" x �" 9.8�� (�50mm) x �.��1 (110mm) 9.8�� �.��1 0.559 0.��8 17.��1 5.�15 1.�99 8.858 7.677 11.000 PP0�0��50110

10" x 6" 9.8�� (�50mm) x 6.�99 (160mm 9.8�� 6.�99 0.559 0.�58 17.��� �.��1 �.�8� 8.858 8.�86 11.000 PP0�0��50160

z2

z1

D1

d2

L1

L2

L

S2

S1

Page 37: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�71.05�609

ChemicalProcess Piping Systems - Dimensional Data

PN 6 / SDR 17.6

Nominal Actual OD D1 D2 S1 S2 L L1 L2 Weight Part

Size Size in in in in in in in Lbs Number

�" x 1½" �.�80 (6�mm) x 1.969 (50mm) �.�80 1.969 0.1�� 0.11� �.�6� 1.1�� 1.06� 0.09� PP0�0�06�050

�½" x 1½" �.95� (75mm) x 1.969 (50mm) �.95� 1.969 0.169 0.11� �.756 1.181 1.10� 0.11� PP0�0�075050

�½" x �" �.95� (75mm) x �.�80 (6�mm) �.95� �.�80 0.169 0.1�� �.��8 1.0�� 1.10� 0.095 PP0�0�07506�

�" x 1½" �.5�� (90mm) x 1.969 (50mm) �.5�� 1.969 0.�01 0.11� �.95� 1.181 1.10� 0.180 PP0�0�090050

�" x �" �.5�� (90mm) x �.�80 (6�mm) �.5�� �.�80 0.�01 0.1�� �.95� 1.1�� 1.0�� 0.19� PP0�0�09006�

�" x �½" �.5�� (90mm) x �.95� (75mm) �.5�� �.95� 0.�01 0.169 �.95� 1.��0 1.0�� 0.�05 PP0�0�090075

�" x 1½" �.��1 (110mm) x 1.969 (50mm) �.��1 1.969 0.��8 0.11� �.5�� 0.866 0.7�8 0.�01 PP0�0�110050

�" x �" �.��1 (110mm) x �.�80 (6�mm) �.��1 �.�80 0.��8 0.1�� �.1�� 1.575 1.�17 0.�1� PP0�0�11006�

�" x �½" �.��1 (110mm) x �.95� (75mm) �.��1 �.95� 0.��8 0.169 �.5�� 1.10� 0.7�8 0.�19 PP0�0�110075

�" x �" �.��1 (110mm) x �.5�� (90mm) �.��1 �.5�� 0.��8 0.�01 �.9�7 1.65� 1.65� 0.�51 PP0�0�110090

�½" x �" �.9�1 (1�5mm) x �.�80 (6�mm)) �.9�1 �.�80 0.�80 0.1�� �.7�� 1.�60 0.6�0 0.�96 PP0�0�1�1506

�½" x �½" �.9�1 (1�5mm) x �.95� (75mm) �.9�1 �.95� 0.�80 0.169 �.858 1.�60 0.7�8 0.��6 PP0�0�1�5075

�½" x �" �.9�1 (1�5mm) x �.5�� (90mm) �.9�1 �.5�� 0.�80 0.�01 �.��1 1.61� 1.61� 0.596 PP0�0�1�5090

�½" x �" �.9�1 (1�5mm) x �.��1 (110mm) �.9�1 �.��1 0.�80 0.��8 �.9�7 1.65� 1.61� 0.579 PP0�0�1�5110

5" x �½" 5.51� (1�0mm) x �.95� (75mm) 5.51� �.95� 0.�15 0.169 5.�15 �.087 1.575 0.�6� PP0�0�1�0075

5" x �" 5.51� (1�0mm) x �.5�� (90mm) 5.51� �.5�� 0.�15 0.�01 5.118 �.087 1.65� 0.5�8 PP0�0�1�0090

5" x �" 5.51� (1�0mm) x �.��1 (110mm) 5.51� �.��1 0.�15 0.��8 �.7�� 1.�78 1.10� 0.�5� PP0�0�1�0110

5" x �" 5.51� (1�0mm) x �.9�1 (1�5mm) 5.51� �.9�1 0.�15 0.�80 7.087 1.�78 1.�60 0.�7� PP0�0�1�01�5

6" x �" 6.�99 (160mm) x �.5�� (90mm) 6.�99 �.5�� 0.�58 0.�01 5.��� �.087 1.61� 1.100 PP0�0�160090

6" x �" 6.�99 (160mm) x �.��1 (110mm) 6.�99 �.��1 0.�58 0.��8 5.0�9 �.087 1.61� 1.100 PP0�0�160110

6" x �½" 6.�99 (160mm) x �.9�1 (1�5mm) 6.�99 �.9�1 0.�58 0.�80 �.80� �.0�7 1.65� 1.067 PP0�0�1601�5

6" x 5" 6.�99 (160mm) x 5.51� (1�0mm) 6.�99 5.51� 0.�58 0.�15 �.7�� �.008 1.850 1.100 PP0�0�1601�0

7" x �" 7.087 (180mm) x �.5�� (90mm) 7.087 �.5�� 0.�0� 0.�01 5.709 �.087 1.65� 1.0�� PP0�0�180090

7" x �" 7.087 (180mm) x �.��1 (110mm) 7.087 �.��1 0.�0� 0.��8 5.906 �.165 1.65� 0.8�6 PP0�0�180110

7" x �½" 7.087 (180mm) x �.9�1 (1�5mm) 7.087 �.9�1 0.�0� 0.�80 5.6�0 �.0�7 1.65� 0.9�� PP0�0�1801�5

7" x 5" 7.087 (180mm) x 5.51� (1�0mm) 7.087 5.51� 0.�0� 0.�15 5.�15 �.0�7 1.850 0.70� PP0�0�1801�0

7" x 6" 7.087 (180mm) x 6.�99 (160mm) 7.087 6.�99 0.�0� 0.�58 5.51� 1.77� 1.575 0.70� PP0�0�180160

Reducer

Description: Reducer PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

D1D2

L1

L2

L

S2S1

(Continued on Next Page)

Page 38: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

�8

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Reducer

Description: Reducer PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 6 / SDR 17.6

Nominal Actual OD D1 D2 S1 S2 L L1 L2 Weight Part

Size Size in in in in in in in Lbs Number

8" x 5" 7.87� (�00mm) x 5.51� (1�0mm) 7.87� 5.51� 0.��9 0.�15 5.709 �.��1 1.65� 1.0�� PP0�0���01�0

8" x 6" 7.87� (�00mm) x 6.�99 (160mm) 7.87� 6.�99 0.��9 0.�58 5.709 �.��1 �.0�7 1.958 PP0�0���0160

8" x 7" 7.87� (�00mm) x 7.087 (180mm) 7.87� 7.087 0.��9 0.�0� 5.709 �.��1 �.0�7 0.9�6 PP0�0���0180

9" x 5" 8.858 (��5mm) x 5.51� (1�0mm) 8.858 5.51� 0.50� 0.�15 5.906 �.��1 1.9�9 �.�87 PP0�0���51�0

9" x 6" 8.858 (��5mm) x 6.�99 (160mm) 8.858 6.�99 0.50� 0.�58 6.�99 �.559 �.087 �.519 PP0�0���5160

9" x 7" 8.858 (��5mm) x 7.087 (180mm) 8.858 7.087 0.50� 0.�0� 6.�99 �.5�0 �.��� �.618 PP0�0���5180

9" x 8" 8.858 (��5mm) x 7.87� (�00mm) 8.858 7.87� 0.50� 0.��9 6.�99 �.�80 �.087 �.�10 PP0�0���5�00

10" x 6" 9.8�� (�50mm) x 6.�99 (160mm 9.8�� 6.�99 0.559 0.�58 6.69� �.�80 �.087 �.�11 PP0�0��50160

10" x 7" 9.8�� (�50mm) x 7.087 (180mm) 9.8�� 7.087 0.559 0.�0� 6.890 �.5�0 �.�8� �.�98 PP0�0��50180

10" x 8" 9.8�� (�50mm) x 7.87� (�00mm) 9.8�� 7.87� 0.559 0.��9 7.087 �.5�0 �.5�0 �.960 PP0�0��50�00

10" x 9" 9.8�� (�50mm) x 8.858 (��5mm) 9.8�� 8.858 0.559 0.50� 7.�8� �.�6� �.165 �.158 PP0�0��50��5

11" x 8" 11.0�� (�80mm) x 7.87� (�00mm) 11.0�� 7.87� 0.6�6 0.��9 7.�8� �.559 �.559 5.19� PP0�0��80�00

11" x 9" 11.0�� (�80mm) x 8.858 (��5mm) 11.0�� 8.858 0.6�6 0.50� 7.87� �.756 �.165 5.��� PP0�0��80��5

11" x 10" 11.0�� (�80mm) x 9.8�� (�50mm) 11.0�� 9.8�� 0.6�6 0.559 7.87� �.8�5 �.��1 5.588 PP0�0��80�50

1�"x 8" 1�.�0� (�15mm) x 7.87� (�00mm) 1�.�0� 7.87� 0.705 0.��9 9.7�� �.150 1.969 7.08� PP0�0��15�00

1�"x 9" 1�.�0� (�15mm) x 8.858 (��5mm) 1�.�0� 8.858 0.705 0.50� 9.�70 �.�07 �.�6� 7.17� PP0�0��15��5

1�" x 10" 1�.�0� (�15mm) x 9.8�� (�50mm) 1�.�0� 9.8�� 0.705 0.559 9.17� �.�07 �.5�0 7.�16 PP0�0��15�50

1�" x 11" 1�.�0� (�15mm) x 11.0�� (�80mm) 1�.�0� 11.0�� 0.705 0.6�6 8.7�0 �.150 �.756 7.788 PP0�0��15�80

1�" x 9" 1�.976 (�55mm) x 8.858 (��5mm) 1�.976 8.858 0.791 0.50� 9.6�6 �.5�� 1.969 7.�0� PP0�0��55��5

1�" x 10" 1�.976 (�55mm) x 9.8�� (�50mm) 1�.976 9.8�� 0.791 0.559 9.6�6 �.5�� �.�6� 6.7�� PP0�0��55�50

1�" x 11" 1�.976 (�55mm) x 11.0�� (�80mm) 1�.976 11.0�� 0.791 0.6�6 9.6�6 �.5�� �.756 6.�9� PP0�0��55�80

1�" x 1�" 1�.976 (�55mm) x 1�.�0� (�15mm) 1�.976 1�.�0� 0.791 0.705 9.6�6 �.5�� �.150 6.160 PP0�0��55�15

D1D2

L1

L2

L

S2S1

(Continued on Next Page)

Page 39: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�91.05�609

ChemicalProcess Piping Systems - Dimensional Data

Reducer

Description: Reducer PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

D1D2

L1

L2

L

S2S1

PN 6 / SDR 17.6

Nominal Actual OD D1 D2 S1 S2 L L1 L2 Weight Part

Size Size in in in in in in in Lbs Number

16" x 9" 15.7�8 (�00mm) x 8.858 (��5mm) 15.7�8 8.858 0.89� 0.50� 10.��6 �.7�0 �.�6� 10.1�0 PP0�0��00��5

16" x 10" 15.7�8 (�00mm) x 9.8�� (�50mm) 15.7�8 9.8�� 0.89� 0.559 10.��6 �.7�0 �.756 9.680 PP0�0��00�50

16" x 11" 15.7�8 (�00mm) x 11.0�� (�80mm) 15.7�8 11.0�� 0.89� 0.6�6 10.��6 �.7�0 �.756 9.0�0 PP0�0��00�80

16" x 1�" 15.7�8 (�00mm) x 1�.�0� (�15mm) 15.7�8 1�.�0� 0.89� 0.705 10.��6 �.7�0 �.150 7.9�0 PP0�0��00�15

16" x 1�" 15.7�8 (�00mm) x 1�.976 (�55mm) 15.7�8 1�.976 0.89� 0.791 10.��6 �.7�0 �.5�� 6.8�0 PP0�0��00�55

18" x 11" 17.717 (�50mm) x 11.0�� (�80mm) 17.717 11.0�� 1.00� 0.6�6 9.055 �.�6� �.756 1�.�00 PP0�0��50�80

18" x 1�" 17.717 (�50mm) x 1�.�0� (�15mm) 17.717 1�.�0� 1.00� 0.705 9.055 �.�6� �.150 11.880 PP0�0��50�15

18" x 1�" 17.717 (�50mm) x 1�.976 (�55mm) 17.717 1�.976 1.00� 0.791 9.055 �.�6� �.5�� 11.000 PP0�0��50�55

18" x 16" 17.717 (�50mm) x 15.7�8 (�00mm) 17.717 15.7�8 1.00� 0.89� 9.055 �.�6� �.7�0 9.680 PP0�0��50�00

�0" x 1�" 19.685 (500mm) x 1�.�0� (�15mm) 19.685 1�.�0� 1.118 0.705 9.055 �.�6� �.150 17.8�0 PP0�0�500�15

�0" x 1�" 19.685 (500mm) x 1�.976 (�55mm) 19.685 1�.976 1.118 0.791 9.055 �.�6� �.5�� 16.060 PP0�0�500�55

�0" x 16" 19.685 (500mm) x 15.7�8 (�00mm) 19.685 15.7�8 1.118 0.89� 9.055 �.�6� �.7�0 1�.7�0 PP0�0�500�00

�0" x 16" 19.685 (500mm) x 17.717 (�50mm) 19.685 17.717 1.118 1.00� 9.055 �.�6� �.�6� 1�.100 PP0�0�500�50

��" x 16" ��.0�7 (560mm) x 15.7�8 (�00mm) ��.0�7 15.7�8 1.��8 0.89� 9.055 �.�6� �.7�0 �1.780 PP0�0�560�00

��" x 18" ��.0�7 (560mm) x 17.717 (�50mm) ��.0�7 17.717 1.��8 1.00� 7.87� �.�6� �.�6� 18.9�0 PP0�0�560�50

��" x �0" ��.0�7 (560mm) x 19.685 (500mm) ��.0�7 19.685 1.��8 1.118 7.87� �.�6� �.�6� 16.7�0 PP0�0�560500

��" x 16" ��.80� (6�0mm) x 15.7�8 (�00mm) ��.80� 15.7�8 1.�06 0.89� 9.055 �.�6� �.7�0 ��.��0 PP0�0�6�0�00

��" x 18" ��.80� (6�0mm) x 17.717 (�50mm) ��.80� 17.717 1.�06 1.00� 7.87� �.�6� �.�6� �0.1�0 PP0�0�6�0�50

��" x �0" ��.80� (6�0mm) x 19.685 (500mm) ��.80� 19.685 1.�06 1.118 7.87� �.�6� �.�6� �6.�00 PP0�0�6�0500

��" x ��" ��.80� (6�0mm) x ��.0�7 (560mm) ��.80� ��.0�7 1.�06 1.��8 7.87� �.�6� �.�6� �1.560 PP0�0�6�0560

�8" x �0" �7.95� (710mm) x 19.685 (500mm) �7.95� 19.685 1.58� 1.118 7.�80 �.�07 1.575 �1.800 PP0�0�710500

�8" x ��" �7.95� (710mm) x ��.0�7 (560mm) �7.95� ��.0�7 1.58� 1.��8 6.69� �.189 1.575 �8.�80 PP0�0�7106�0

�8" x ��" �7.95� (710mm) x ��.80� (6�0mm) �7.95� ��.80� 1.58� 1.�06 5.51� �.795 1.575 �0.1�0 PP0�0�7106�0

�0" x ��" �1.�96 (800mm) x ��.0�7 (560mm) �1.�96 ��.0�7 1.78� 1.��8 7.87� �.��6 1.575 ��.��0 PP0�0�800560

�0" x ��" �1.�96 (800mm) x ��.80� (6�0mm) �1.�96 ��.80� 1.78� 1.�06 7.087 �.��6 1.575 51.�80 PP0�0�8006�0

�0" x �8" �1.�96 (800mm) x �7.95� (710mm) �1.�96 �7.95� 1.78� 1.58� 5.906 �.071 1.575 �1.580 PP0�0�800710

Page 40: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

�0

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Description: Stub Ends PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

Stub Ends

PN 6 / SDR 17.6

Nominal Actual OD D S D3 D4 H1 h4 z1 Weight Part

Size Size in in in in in in in lbs Number

1½" 1.969 (50mm) 1.969 0.11� �.�6� �.��8 0.�7� 0.787 1.969 0.176 PP0�06050

�" �.�80 (6�mm) �.�80 0.1�� �.8�5 �.976 0.551 0.6�0 1.969 0.�18 PP0�0606�

�½" �.95� (75mm) �.95� 0.169 �.��5 �.7�� 0.6�0 0.787 1.969 0.�6� PP0�06075

�" �.5�� (90mm) �.5�� 0.�01 �.016 5.��6 0.669 1.69� �.150 0.598 PP0�06090

�" �.��1 (110mm) �.��1 0.��8 �.961 6.�99 0.709 1.65� �.�68 0.81� PP0�06110

�½" �.9�1 (1�5mm) �.9�1 0.�80 5.�76 6.�99 0.7�8 1.77� �.�65 0.7�8 PP0�061�5

5" 5.51� (1�0mm) 5.51� 0.�15 6.1�� 7.��1 0.709 1.5�5 �.�68 1.1�� PP0�061�0

6" 6.�99 (160mm) 6.�99 0.�58 6.9�9 8.��5 0.709 1.61� �.��8 1.�96 PP0�06160

7" 7.087 (180mm) 7.087 0.�0� 7.1�6 8.�86 0.8�7 �.��1 �.�68 1.��1 PP0�06180

8" 7.87� (�00mm) 7.87� 0.��9 9.17� 10.591 0.98� �.�8� �.76� �.�66 PP0�06�00

9" 8.858 (��5mm) 8.858 0.50� 9.��1 10.6�0 0.9�5 �.559 �.76� �.�1� PP0�06��5

10" 9.8�� (�50mm) 9.8�� 0.559 11.��0 1�.6�8 0.98� �.�0� �.7�� �.88� PP0�06�50

11" 11.0�� (�80mm) 11.0�� 0.6�6 11.�96 1�.6�8 0.98� �.795 �.7�� �.��� PP0�06�80

1�" 1�.�0� (�15mm) 1�.�0� 0.705 1�.��8 1�.567 1.0�� �.��6 6.�57 6.51� PP0�06�15

1�" 1�.976 (�55mm) 1�.976 0.791 1�.7�� 17.008 1.181 �.898 7.��� 8.580 PP0�06�55

16" 15.7�8 (�00mm) 15.7�8 0.89� 16.850 19.055 1.�99 �.��1 7.8�5 1�.518 PP0�06�00

18" 17.717 (�50mm) 17.717 1.00� �0.��6 ��.071 1.811 �.5�0 5.51� ��.�96 PP0�06�50

�0" 19.685 (500mm) 19.685 1.118 �0.866 ��.0�1 1.850 �.6�8 5.551 �0.�60 PP0�06500

��" ��.0�7 (560mm) ��.0�7 1.��8 ��.�1� �6.969 1.969 �.�6� 5.551 �6.�00 PP0�06560

��" ��.80� (6�0mm) ��.80� 1.�06 �5.�76 �7.087 �.008 �.559 5.591 �5.55� PP0�066�0

�8" �7.95� (710mm) �7.95� 1.58� �9.016 �1.�96 1.969 1.969 5.906 �0.0�0 PP0�06710

�0" �1.�96 (800mm) �1.�96 1.78� ��.071 �5.6�0 �.0�7 1.890 5.906 5�.580 PP0�06800

��" �5.��� (900mm) �5.��� �.008 �7.165 �9.567 �.165 1.969 6.10� 66.660 PP0�06900

�9" �9.�70 (1000mm) �9.�70 �.��� �1.��0 ��.701 �.�6� 1.969 7.087 9�.�80 PP0�01000

D3 D D4

h4H1

z1

S

Page 41: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�11.05�609

ChemicalProcess Piping Systems - Dimensional Data

Backing Ring

Description: Backing Ring 150 lbs. ANSI Drilling

Material: Glass Filled Polypropylene with Steel Core

Execution: Molded

Nominal B D D2 d6 K # Weight SIMTECH

Size in in in in in Holes lbs Part #

½" 0.�7� �.50� 0.6�0 1.��0 �.�6� � 0.�8� PP990700�0

¾" 0.�7� �.858 0.6�0 1.�19 �.756 � 0.660 PP990700�5

1" 0.6�0 �.�5� 0.6�0 1.6�� �.110 � 0.970 PP990700��

1¼" 0.6�0 �.606 0.6�0 1.988 �.50� � 1.188 PP990700�0

1½" 0.709 5.000 0.6�0 �.��1 �.858 � 1.�5� PP99070050

�" 0.709 5.98� 0.7�8 �.051 �.76� � 1.78� PP9907006�

�½" 0.709 7.008 0.7�8 �.�8� 5.51� � �.�18 PP99070075

�" 0.709 7.�80 0.7�8 �.�5� 5.98� 8 �.��0 PP99070090

�" & �½" 0.709 9.016 0.7�8 5.0�9 7.5�0 8 �.0�8 PP99070110

6" & 7" 0.9�5 11.0�� 0.87� 7.1�6 9.�88 8 6.��5 PP99070160

8" & 9" 0.9�5 1�.50� 0.87� 9.�70 11.7�� 8 10.�56 PP99070�00

10" & 11" 1.181 15.98� 1.000 11.516 1�.�5� 1� 1�.6�8 PP99070�50

1�" 1.��9 19.016 1.000 1�.�87 17.008 1� �6.��� PP99070�15

1�" 1.65� �0.98� 1.1�� 1�.78� 18.7�0 16 ��.5�0 PP99070�55

16" 1.7�� ��.50� 1.1�� 16.890 �1.�60 16 �8.7�0 PP99070�00

D2

D

B

d6

K

Page 42: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

��

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Caps: Dome

Description: End Caps PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

PN 6 / SDR 17.6

Nominal Actual OD D S L Weight Part

Size Size in in in lbs Number

1½" 1.969 (50mm) 1.969 0.11� �.756 0.079 PP0��10050

�" �.�80 (6�mm) �.�80 0.1�� �.��8 0.1�5 PP0��1006�

�½" �.95� (75mm) �.95� 0.169 �.6�� 0.��1 PP0��10075

�" �.5�� (90mm) �.5�� 0.�01 �.17� 0.�7� PP0��10090

�" �.��1 (110mm) �.��1 0.��8 �.7�� 0.601 PP0��10110

�½" �.9�1 (1�5mm) �.9�1 0.�80 �.961 0.8�� PP0��101�5

5" 5.51� (1�0mm) 5.51� 0.�15 5.�5� 1.100 PP0��101�0

6" 6.�99 (160mm) 6.�99 0.�58 5.906 1.650 PP0��10160

7" 7.087 (180mm) 7.087 0.�0� 6.�99 �.��� PP0��10180

8" 7.87� (�00mm) 7.87� 0.��9 6.890 �.99� PP0��10�00

9" 8.858 (��5mm) 8.858 0.50� 7.87� �.9�9 PP0��10��5

10" 9.8�� (�50mm) 9.8�� 0.559 8.071 5.115 PP0��10�50

11" 11.0�� (�80mm) 11.0�� 0.6�6 9.�5� 6.600 PP0��10�80

1�" 1�.�0� (�15mm) 1�.�0� 0.705 10.0�9 9.900 PP0��10�15

1�" 1�.976 (�55mm) 1�.976 0.791 11.0�� 1�.�88 PP0��10�55

16" 15.7�8 (�00mm) 15.7�8 0.89� 1�.�05 �1.6�6 PP0��10�00

D

S

L

Page 43: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

��1.05�609

ChemicalProcess Piping Systems - Dimensional Data

Caps: Flat

Description: End Caps PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Machined

Connection: Butt Fusion

PN 6 / SDR 17.6

Nominal Actual OD D S L L1 Weight Part

Size Size in in in in lbs Number

10" 9.8�� (�50mm) 9.8�� 0.559 1.77� 1.��0 �.��� PP0�090�50

11" 11.0�� (�80mm) 11.0�� 0.6�6 1.77� 1.�78 �.55� PP0�090�80

1�" 1�.�0� (�15mm) 1�.�0� 0.705 1.969 1.5�5 6.�68 PP0�090�15

1�" 1�.976 (�55mm) 1�.976 0.791 �.165 1.7�� 9.17� PP0�090�55

16" 15.7�8 (�00mm) 15.7�8 0.89� �.�6� 1.969 1�.11� PP0�090�00

18" 17.717 (�50mm) 17.717 1.00� �.756 �.�05 18.7�� PP0�090�50

�0" 19.685 (500mm) 19.685 1.118 �.95� �.��1 �5.5�0 PP0�090500

��" ��.0�7 (560mm) ��.0�7 1.��8 �.150 �.7�6 �5.�00 PP0�090560

��" ��.80� (6�0mm) ��.80� 1.�06 �.5�� �.071 50.�80 PP0�0906�0

�8" �7.95� (710mm) �7.95� 1.58� �.7�� �.016 7�.700 PP0�090710

�0" �1.�96 (800mm) �1.�96 1.78� 5.118 �.��1 10�.500 PP0�090800

D

S

LL1

Page 44: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

��

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

lateral: 45°

Description: Lateral: 45° PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Fabricated

Connection: Butt Fusion

PN 6 / SDR 17.6

Nominal Actual OD D S L2 z2 z3 Weight Part

Size Size in in in in in lbs Number

�" �.��1 (110mm) �.��1 0.��8 �0.079 16.9�9 �.150 �.�98 PP0�170110

�½" �.9�1 (1�5mm) �.9�1 0.�80 �1.65� 17.717 �.9�7 �.88� PP0�1701�5

5" 5.51� (1�0mm) 5.51� 0.�15 ��.��8 18.50� �.7�� 7.�60 PP0�1701�0

6" 6.�99 (160mm) 6.�99 0.�58 �8.7�0 19.685 9.055 10.��0 PP0�170160

7" 7.087 (180mm) 7.087 0.�0� �0.709 �0.866 9.8�� 1�.��0 PP0�170180

8" 7.87� (�00mm) 7.87� 0.��9 ��.677 �1.65� 11.0�� 17.6�� PP0�170�00

9" 8.858 (��5mm) 8.858 0.50� ��.6�6 ��.8�5 11.811 ��.1�� PP0�170��5

10" 9.8�� (�50mm) 9.8�� 0.559 �7.008 ��.016 1�.99� �0.800 PP0�170�50

11" 11.0�� (�80mm) 11.0�� 0.6�6 �9.�70 �5.591 1�.780 �1.800 PP0�170�80

1�" 1�.�0� (�15mm) 1�.�0� 0.705 ��.�07 �7.559 15.7�8 57.��0 PP0�170�15

1�" 1�.976 (�55mm) 1�.976 0.791 50.�9� ��.�65 16.9�9 75.680 PP0�170�55

16" 15.7�8 (�00mm) 15.7�8 0.89� 5�.150 �5.��� 17.717 10�.�80 PP0�170�00

18" 17.717 (�50mm) 17.717 1.00� 56.�99 �7.�0� 18.898 1�9.9�0 PP0�170�50

�0" 19.685 (500mm) 19.685 1.118 59.055 �9.�70 19.685 18�.�80 PP0�170500

��" ��.0�7 (560mm) ��.0�7 1.��8 6�.99� �1.��9 �1.65� ��5.�00 PP0�170560

��" ��.80� (6�0mm) ��.80� 1.�06 6�.961 ��.�07 �1.65� �99.�00 PP0�1706�0

D

D

S

L2

z2

z3 z2

45°

Page 45: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�51.05�609

ChemicalProcess Piping Systems - Dimensional Data

lateral: 60°

Description: Lateral: 60° PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Fabricated

Connection: Butt Fusion

PN 6 / SDR 17.6

Nominal Actual OD D S L2 z2 z3 Weight Part

Size Size in in in in in lbs Number

�" �.��1 (110mm) �.��1 0.��8 19.685 1�.795 6.890 �.�88 PP0�165110

�½" �.9�1 (1�5mm) �.9�1 0.�80 �1.�57 1�.976 7.�80 �.7�0 PP0�1651�5

5" 5.51� (1�0mm) 5.51� 0.�15 ��.87� 1�.055 8.819 6.�0� PP0�1651�0

6" 6.�99 (160mm) 6.�99 0.�58 �5.�76 16.��0 9.055 8.866 PP0�165160

7" 7.087 (180mm) 7.087 0.�0� �7.559 17.717 9.8�� 1�.1�� PP0�165180

8" 7.87� (�00mm) 7.87� 0.��9 �9.88� 19.17� 10.709 16.5�� PP0�165�00

9" 8.858 (��5mm) 8.858 0.50� ��.677 �0.866 11.811 ��.000 PP0�165��5

10" 9.8�� (�50mm) 9.8�� 0.559 �5.6�0 ��.8�5 1�.795 �9.700 PP0�165�50

11" 11.0�� (�80mm) 11.0�� 0.6�6 �9.17� ��.80� 1�.�70 �0.�80 PP0�165�80

1�" 1�.�0� (�15mm) 1�.�0� 0.705 ��.91� �7.165 15.7�8 55.660 PP0�165�15

1�" 1�.976 (�55mm) 1�.976 0.791 �5.�7� �8.7�0 16.7�� 7�.�60 PP0�165�55

16" 15.7�8 (�00mm) 15.7�8 0.89� �9.�1� �1.�96 17.717 100.980 PP0�165�00

18" 17.717 (�50mm) 17.717 1.00� 5�.165 ��.�65 18.701 1�5.5�0 PP0�165�50

�0" 19.685 (500mm) 19.685 1.118 55.118 �5.��� 19.685 177.760 PP0�165500

��" ��.0�7 (560mm) ��.0�7 1.��8 58.�68 �7.�0� �0.866 ��8.1�0 PP0�165560

��" ��.80� (6�0mm) ��.80� 1.�06 60.8�7 �9.�70 �1.�57 �89.7�0 PP0�1656�0

D

D

S

L2

z2

z3 z2

60°

Page 46: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

�6

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

45psi Dimensional Data

Page 47: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�71.05�609

ChemicalProcess Piping Systems - Dimensional Data

PN 3.2 / SRD 33

Nomnial Actual OD D S Weight Weight Part

Size Size in in (lbs./ m) Lbs. Foot Number

1½" 1.969 (50mm) 1.969 0.071 0.605 0.189 PP0�000050

�" �.�80 (6�mm) �.�80 0.079 0.8�0 0.�6� PP0�00006�

�½" �.95� (75mm) �.95� 0.091 1.16� 0.�6� PP0�000075

�" �.5�� (90mm) �.5�� 0.110 1.668 0.5�1 PP0�000090

�" �.��1 (110mm) �.��1 0.1�� �.�6� 0.770 PP0�000110

�½" �.9�1 (1�5mm) �.9�1 0.15� �.190 0.997 PP0�0001�5

5" 5.51� (1�0mm) 5.51� 0.169 �.960 1.��8 PP0�0001�0

6" 6.�99 (160mm) 6.�99 0.19� 5.10� 1.595 PP0�000160

7" 7.087 (180mm) 7.087 0.�17 6.�68 �.0�1 PP0�000180

8" 7.87� (�00mm) 7.87� 0.��� 8.096 �.5�0 PP0�000�00

9" 8.858 (��5mm) 8.858 0.�7� 10.05� �.1�� PP0�000��5

10" 9.8�� (�50mm) 9.8�� 0.�0� 1�.�7� �.898 PP0�000�50

11" 11.0�� (�80mm) 11.0�� 0.��9 15.598 �.87� PP0�000�80

1�" 1�.�0� (�15mm) 1�.�0� 0.�8� 19.7�� 6.167 PP0�000�15

1�" 1�.976 (�55mm) 1�.976 0.��9 ��.860 7.769 PP0�000�55

16" 15.7�8 (�00mm) 15.7�8 0.�8� �1.680 9.900 PP0�000�00

18" 17.717 (�50mm) 17.717 0.5�� �0.0�0 1�.51� PP0�000�50

�0" 19.685 (500mm) 19.685 0.60� �9.�80 15.�00 PP0�000500

��" ��.0�7 (560mm) ��.0�7 0.677 6�.0�0 19.�87 PP0�000560

��" ��.80� (6�0mm) ��.80� 0.760 78.��0 ��.�75 PP0�0006�0

�8" �7.95� (710mm) �7.95� 0.858 99.��0 �1.075 PP0�000710

�0" �1.�96 (800mm) �1.�96 0.965 1�5.8�0 �9.��5 PP0�000800

��" �5.��� (900mm) �5.��� 1.087 159.500 �9.8�� PP0�000900

�9" �9.�70 (1000mm) �9.�70 1.�05 196.��0 61.��5 PP0�0001000

PRESSURE PIPE

Description: Pressure Pipe PN3.2 / SDR 33 - 45psi

Material: Polypropylene

Execution: Extruded, Stress Relieved

Connection: Butt Fusion

D

S

Page 48: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

�8

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

PN 3.2 / SDR 33

Nomnial Actual OD D S Le Z Weight Part

Size Size in in in in lbs Number

�" �.��1 (110mm) �.��1 0.1�� 0.�7� �.5�8 0.�88 PP0�010110

�½" �.9�1 (1�5mm) �.9�1 0.15� 0.�15 5.118 0.77� PP0�0101�5

5" 5.51� (1�0mm) 5.51� 0.169 0.�15 5.906 1.01� PP0�0101�0

6" 6.�99 (160mm) 6.�99 0.19� 0.709 6.575 1.58� PP0�010160

7" 7.087 (180mm) 7.087 0.�17 0.�15 7.��� �.��� PP0�010180

8" 7.87� (�00mm) 7.87� 0.��� 0.7�8 8.110 �.9�6 PP0�010�00

9" 8.858 (��5mm) 8.858 0.�7� 0.�9� 9.09� �.960 PP0�010��5

10" 9.8�� (�50mm) 9.8�� 0.�0� 0.787 10.079 5.1�8 PP0�010�50

11" 11.0�� (�80mm) 11.0�� 0.��9 0.�9� 11.�60 8.��8 PP0�010�80

1�" 1�.�0� (�15mm) 1�.�0� 0.�8� 0.866 1�.756 10.69� PP0�010�15

1�" 1�.976 (�55mm) 1�.976 0.��9 0.591 1�.961 1�.�98 PP0�010�55

16" 15.7�8 (�00mm) 15.7�8 0.�8� 0.98� 17.1�6 18.�16 PP0�010�00

Description: Elbow: 90° PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

Elbow: 90°

Z

D

Le

S

r=d

Page 49: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

�91.05�609

ChemicalProcess Piping Systems - Dimensional Data

PN3.2 / SDR 33

Nominal Actual OD D S L L1 Z Weight Part

Size Size in in in in in lbs Number

�" �.��1 (110mm) �.��1 0.1�� 8.�65 1.969 �.1�� 0.880 PP0�0�0110

�½" �.9�1 (1�5mm) �.9�1 0.15� 8.58� �.�6� �.�1� 0.19� PP0�0�01�5

5" 5.51� (1�0mm) 5.51� 0.169 9.961 �.165 �.9�1 �.�88 PP0�0�01�0

6" 6.�99 (160mm) 6.�99 0.19� 10.6�0 �.6�� 5.51� �.189 PP0�0�0160

7" 7.087 (180mm) 7.087 0.�17 1�.�05 �.�65 5.906 �.10� PP0�0�0180

8" 7.87� (�00mm) 7.87� 0.��� 1�.�86 �.8�5 6.69� �.1�6 PP0�0�0�00

9" 8.858 (��5mm) 8.858 0.�7� 17.��� �.5�0 8.661 8.668 PP0�0�0��5

10" 9.8�� (�50mm) 9.8�� 0.�0� 17.��� �.5�0 8.�65 10.1�0 PP0�0�0�50

11" 11.0�� (�80mm) 11.0�� 0.��9 19.685 �.��8 9.567 1�.5�0 PP0�0�0�80

1�" 1�.�0� (�15mm) 1�.�0� 0.�8� �1.06� �.��8 10.6�0 18.810 PP0�0�0�15

1�" 1�.976 (�55mm) 1�.976 0.��9 �6.5�5 �.9�7 1�.661 �9.61� PP0�0�0�55

16" 15.7�8 (�00mm) 15.7�8 0.�8� �6.77� �.7�0 1�.�86 �5.��0 PP0�0�0�00

Tee

Description: Tee PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

ZD

L1

L

S

Page 50: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

50

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

PN 3.2 / SDR 33

Nominal Actual OD D S D3 D4 H1 h4 z1 Weight Part

Size Size in in in in in in in lbs Number

�" �.��1 (110mm) �.��1 0.1�� �.9�1 6.��0 0.709 1.10� �.150 0.667 PP0�06110

�½" �.9�1 (1�5mm) �.9�1 0.15� 5.197 6.��0 0.709 1.�60 �.150 0.565 PP0�061�5

5" 5.51� (1�0mm) 5.51� 0.169 6.1�� 7.��1 0.709 1.�57 �.189 0.880 PP0�061�0

6" 6.�99 (160mm) 6.�99 0.19� 6.969 8.��5 0.709 1.575 �.�68 1.1�� PP0�06160

7" 7.087 (180mm) 7.087 0.�17 7.087 8.��6 0.709 1.77� �.150 1.0�� PP0�06180

8" 7.87� (�00mm) 7.87� 0.��� 9.17� 10.551 0.7�8 �.�8� �.76� �.585 PP0�06�00

9" 8.858 (��5mm) 8.858 0.�7� 9.��1 10.6�0 0.7�8 �.�80 �.7�� �.079 PP0�06��5

10" 9.8�� (�50mm) 9.8�� 0.�0� 11.��0 1�.598 0.787 �.�6� �.9�7 �.685 PP0�06�50

11" 11.0�� (�80mm) 11.0�� 0.��9 11.�96 1�.6�8 0.8�7 �.756 �.685 �.01� PP0�06�80

1�" 1�.�0� (�15mm) 1�.�0� 0.�8� 1�.��8 1�.567 0.8�7 �.��6 6.�57 �.�88 PP0�06�15

1�" 1�.976 (�55mm) 1�.976 0.��9 1�.7�� 17.0�7 0.9�5 �.858 7.165 5.65� PP0�06�55

16" 15.7�8 (�00mm) 15.7�8 0.�8� 16.850 19.055 1.0�� �.17� 7.795 8.118 PP0�06�00

18" 17.717 (�50mm) 17.717 0.5�� �0.��6 ��.0�1 1.�96 �.�6� �.7�� 16.060 PP0�06�50

�0" 19.685 (500mm) 19.685 0.60� �0.866 ��.071 1.5�5 �.��1 5.591 1�.6�0 PP0�06500

��" ��.0�7 (560mm) ��.0�7 0.677 ��.�1� �6.969 1.575 �.�6� �.7�� �0.0�0 PP0�06560

��" ��.80� (6�0mm) ��.80� 0.760 �5.�76 �6.969 1.575 �.�6� �.7�� 15.906 PP0�066�0

�8" �7.95� (710mm) �7.95� 0.858 �9.016 �1.�96 1.�78 1.969 5.�15 ��.0�� PP0�06710

�0" �1.�96 (800mm) �1.�96 0.965 ��.071 �5.6�0 1.�17 1.9�9 5.�15 �0.580 PP0�06800

��" �5.��� (900mm) �5.��� 1.087 �7.165 �9.567 1.575 1.969 5.51� �9.160 PP0�06900

�9" �9.�70 (1000mm) �9.�70 1.�05 �1.��0 ��.701 1.65� 1.890 6.�99 5�.680 PP0�061000

Description: Stub Ends PN6 / SDR 17.6 - 90psi

Material: Polypropylene

Execution: Molded

Connection: Butt Fusion

Stub Ends

D3 D D4

h4H1

z1

S

Page 51: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

511.05�609

ChemicalProcess Piping Systems - Dimensional Data

Backing Ring

Description: Backing Ring 150 lbs. ANSI Drilling

Material: Glass Filled Polypropylene with Steel Core

Execution: Molded

D2

D

B

d6

K

Nominal B D D2 d6 K # Weight SIMTECH

Size in in in in in Holes lbs Part #

½" 0.�7� �.50� 0.6�0 1.��0 �.�6� � 0.�8� PP990700�0

¾" 0.�7� �.858 0.6�0 1.�19 �.756 � 0.660 PP990700�5

1" 0.6�0 �.�5� 0.6�0 1.6�� �.110 � 0.970 PP990700��

1¼" 0.6�0 �.606 0.6�0 1.988 �.50� � 1.188 PP990700�0

1½" 0.709 5.000 0.6�0 �.��1 �.858 � 1.�5� PP99070050

�" 0.709 5.98� 0.7�8 �.051 �.76� � 1.78� PP9907006�

�½" 0.709 7.008 0.7�8 �.�8� 5.51� � �.�18 PP99070075

�" 0.709 7.�80 0.7�8 �.�5� 5.98� 8 �.��0 PP99070090

�" & �½" 0.709 9.016 0.7�8 5.0�9 7.5�0 8 �.0�8 PP99070110

6" & 7" 0.9�5 11.0�� 0.87� 7.1�6 9.�88 8 6.��5 PP99070160

8" & 9" 0.9�5 1�.50� 0.87� 9.�70 11.7�� 8 10.�56 PP99070�00

10" & 11" 1.181 15.98� 1.000 11.516 1�.�5� 1� 1�.6�8 PP99070�50

1�" 1.��9 19.016 1.000 1�.�87 17.008 1� �6.��� PP99070�15

1�" 1.65� �0.98� 1.1�� 1�.78� 18.7�0 16 ��.5�0 PP99070�55

16" 1.7�� ��.50� 1.1�� 16.890 �1.�60 16 �8.7�0 PP99070�00

Page 52: Chemical Process Piping Systems... Corrosion Resistant Fluid and Air Handling Systems. Chemical Process Piping Systems Polypropylene Butt Fusion Dimensional Data ChemicalProcess Piping

5�

ChemicalProcess Piping Systems - Dimensional Data

SIMTECHPhone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.05�609

Simtech Industrial Products, Inc. 47-A Runway Road, Levittown, PA 19057

Phone: 215-547-0444 Fax: 215-547-9129 E-mail: [email protected]

Web site: www.SimtechUSA.com

WARRANTY

Simtech Industrial Products, Inc. products are warranted to be free from defects in materials and workmanship for one (1) year from date of shipment. No claim shall be permitted under this warranty unless Buyer gives Simtech Industrial Products, Inc. written notice of all respects in which Buyer claims the product to be defective. Notice must be received within ten (10) days from the date which the Buyer discovers, or should have discovered the defect. Buyer shall give Simtech Industrial Products, Inc. a reasonable opportunity to inspect the product after notice has been given. This warranty shall not apply to any products or components, which have been subjected to abnormal use, negligence or accident.

Seller’s sole obligation under this warranty shall be limited solely on the repair or replacement, as elected by Simtech Industrial Products, Inc., of defective or nonconforming material. To the maximum extent permitted by law, Buyer irrevocably waives all claims for money damages relating to the condition, use and performance of the goods purchased. In no event shall Simtech Industrial Products, Inc. liability exceed the purchase price of the product sold by Simtech Industrial Products, Inc.

In no event, whether because of a breach of warranty or representation or any other cause, whether based upon contract, tort, warranty or otherwise, arising out of the performance or nonperformance by seller of its obligations under this agreement or with respect to the products sold pursuant here to; shall seller be liable for lost earnings, income or profits or indirect, incidental, liquidated or consequential damages.

The implied warranties of merchantability and fitness for a particular purpose except as set forth in this warranty, express or implied, are hereby disclaimed and excluded. Nothing shall be construed as an additional warranty unless specifically designated as such in writing and signed by Simtech Industrial Products, Inc.

Simtech Industrial Products, Inc. reserves the right, in its discretion, at any time and from time to time, to make changes to any specification, data or information contained herein.