Check Software Commissioning Quality(RTN600)

8/14/2019 Check Software Commissioning Quality(RTN600)

1/16

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Security Level:

www.huawei.com

Check SoftwareCommissioning Quality


2/16

CONTENT

Software Quality Standard List

Quality Checking


3/16

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 3

Software Quality Standard ListItem Result

1 Check ODU received power value whether match with the plan.

2 Check ODU TX power value whether match the plan

3 Check ODU TX and RX frequency whether match the plan

4 Check IF working mode whether match the plan

5 Check 1+1 configuration

6 Check 1+1 switch state

7 Check NE ID and name setting whether match the plan

8 Check NE time whether synchronous with computer time

9 Check NE synchronous clock configuration

10 Check performance monitor state whether enabled

11 Check current and history alarm whether there are abnormal alarms


4/16


1. Check ODU received power value whether match

with the plan.

Plan Document

The actual Rx Power value should within the plan designed receive value range accordingto the customers requirement.


5/16


2. Check ODU TX power value whether match the

plan.

Plan Document

The setting Tx Power value should equal to the plan designed transmit value.

The acceptablevalue:

[25.5]


6/16


3. Check ODU TX and RX frequency whether match

the plan.

Plan Document

The Tx Frequency and actual Tx Frequency should equal to the local site plan designed TxFrequency.


7/16


4. Check IF working mode whether match the plan.

Plan Document

The IF Mode should be the same as the plan document.


8/16


5. Check 1+1 configuration.

IF 1+1 configuration should correspond with the link design.


9/16


6. Check 1+1 switch state.


10/16


7. Check NE ID and name setting whether match the

plan.


11/16


8. Check NE time whether synchronous with

computer time. The NE currently time should be synchronous with your computer clock, and synchronous

mode is NM.

The Same


12/16


9. Check NE synchronous clock configuration.

For RTN 620/610, it is necessary to configure synchronous clock.


13/16


9. Check NE synchronous clock configuration.

RTN 620/610 RTN 620/610

Internal InternalPriority

Priority

5-IF 5-IF

5-IF;

Internal

5-IF;

Internal

Typical mistakes:


14/16


10. Check performance monitor state whether

enabled.

State: Enable. State: Enable.

Check on the setting of enabling performance monitor, which is required to be enabled.


15/16


11. Check current and history alarm whether there

are abnormal alarms.

Browse current alarm, cant exist critical and abnormal alarm. Browse history alarm , cant exist critical and abnormal alarm during normal running time.

For cant handle alarm, please save it and require help.


16/16

Thank youwww.huawei.com

Check Software Commissioning Quality(RTN600)

Documents

Transcript of Check Software Commissioning Quality(RTN600)