CG_DOMRAC
-
Upload
fa-buenaventura -
Category
Documents
-
view
213 -
download
0
Transcript of CG_DOMRAC
-
8/2/2019 CG_DOMRAC
1/6
K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS RAC SERVICING (DOMRAC)
(Exploratory)
*TWG on K to 12 Curriculum Guide version January 31, 2012 1
Content Standard Performance StandardLearning
CompetenciesProject/ Activities Assessment Duration
LESSON 1: PREPARING MATERIALS AND TOOLS
Demonstrate understandingof/on:
Identifying and classifyingmaterials, tools, andequipment
Quantifying/estimatingtools and materials
Specifying refrigeration
materials Requesting tools and
materials
Making/following reports
Storing/stockpilingmaterials
1. Job requirements areidentified.
2. HVAC materials and toolsare identified.
3. Quantity of each materialto be used is determinedor specified.
4. Correct quantity andquality of materials aredetermined as per jobrequirement.
LO1.Identifymaterialsand tools
Activity No.1Making Clip Arts or Album ofMaterials, Tools, andEquipment according toclassification
Written test
Performancetest
3 hours
Manuals and planspecifications
Interpreting manuals.
1. Refrigeration materialsneeded are requestedaccording to prepared list.
2. Requisition form / slip isaccomplished accurately and
properly.3. Request is done according to
company standard operatingprocedure.
LO2.Requestmaterials andtools
Activity No.1Research Work on procedure inrequesting tools and materialsneeded
Written test
Performancetest
2 hours
-
8/2/2019 CG_DOMRAC
2/6
K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS RAC SERVICING (DOMRAC)
(Exploratory)
*TWG on K to 12 Curriculum Guide version January 31, 2012 2
Content Standard Performance StandardLearning
CompetenciesProject/ Activities Assessment Duration
LESSON 2: PERFORMING MENSURATION AND CALCULATIONS
Demonstrate understandingof/on:
Selecting measuringinstruments
Identifying units ofmeasurement to be used
Calculating heat load
1. Object or component to bemeasured is identified,classified, and interpretedaccording to the appropriateregular geometric shape.
2. Measuring tools areselected/identified as perobject to be measured or jobrequirements.
LO1. Selectmeasuringinstruments
Activity No. 1Actual measurement of givenobjectsActivity No. 2Reading of graduations inmetric rule.
Written test
Performancetest
4 hours
Using linearmeasurements
1. Accurate measurements areobtained according to jobrequirements.
2. Instruments are read to thelimit of accuracy of the tool.
3. Work pieces are measuredaccording to jobrequirements.
LO2. Carry outmeasurements andcalculations
Activity No. 1Checking each others bodytemperature using athermometer
PerformanceTest
Written Test
3 hours
-
8/2/2019 CG_DOMRAC
3/6
K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS RAC SERVICING (DOMRAC)
(Exploratory)
*TWG on K to 12 Curriculum Guide version January 31, 2012 3
Content Standard Performance StandardLearning
CompetenciesProject/ Activities Assessment Duration
LESSON 3: INTERPRETING TECHNICAL DRAWINGS AND PLANS
Demonstrate understandingof/on:
Determining refrigerationsymbols and signs
1. Signs, symbols, and data aredetermined according toclassification or asappropriate in drawing.
LO1. Analyzesigns, symbols anddata
Activity No.1Making Schematic Diagram,Pictorial Drawing used in RAC.
Written test
Performancetest
4 hours
1. Components, assemblies or
object are recognized as perjob requirement.2. Dimensions and specification
are identified according to jobrequirements.
LO2. Interpret
technicaldrawingsand plans
Written test
Performancetest
3 hours
-
8/2/2019 CG_DOMRAC
4/6
K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS RAC SERVICING (DOMRAC)
(Exploratory)
*TWG on K to 12 Curriculum Guide version January 31, 2012 4
Content Standard Performance StandardLearning
CompetenciesProject/ Activities Assessment Duration
LESSON 4: MAINTAINING TOOLS AND EQUIPMENT
Demonstrate understandingof/on:
Proper maintenance oftools and equipment
Testing procedures
Parts and functions ofHVAC/R equipment
Housekeeping
1. Tools and equipment aremaintained.
2. Non-functional tools andequipment are segregatedand labeled.
3. Non-functional tools arestored prior to repair.
4. Safe handling of tools andequipment are applied.
5. Safe working habits areobserved.
LO1. Checkcondition of toolsand components
Activity No. 1Identification of functional andnon-functional tools andequipment
Written test
Performancetest
3 hours
Types of lubricants
Inventory guidelines andprocedures
HVAC/R equipment,tools and instrumenttypes and specifications
Lubrication procedures
1. Appropriate lubricants areidentified according to typesof equipment.
2. Lubricated hand tools areproperly stored.
3. Inventory of tools, instruments
and equipment are conductedand recorded.
4. Defective hand tools,instruments, equipment andaccessories are replacedaccording to manufacturersspecification.
5. Proper housekeeping isapplied
LO2. Performbasic preventivemaintenance
Activity No.1Marking or labeling the storagearea of tools and materials.
Activity No.2Applying oil/lubricants in
different tools
Written test
Performancetest
4 hours
-
8/2/2019 CG_DOMRAC
5/6
K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS RAC SERVICING (DOMRAC)
(Exploratory)
*TWG on K to 12 Curriculum Guide version January 31, 2012 5
Content Standard Performance StandardLearning
CompetenciesProject/ Activities Assessment Duration
LESSON 5: PERFORMING HOUSEKEEPING AND SAFETY PRACTICES
Demonstrate understandingof/on:
Classification of tools,equipment and materials.
Considerations in theselection of appropriateareas for storing
materials, tools, andequipment.
1. Materials, tools andequipment are classifiedaccording to their kind.
2. Appropriate areas formaterials, tools, andequipment are designated.
LO1. Sortmaterials,tools andequipment
Activity No.1Classifying of tools, equipment,and materials.
Written test
Performancetest
3 hours
Cleaning materials, typesand applications.
Procedures in cleaningworkplace area, tools,and equipment.
Consideration of a safeworkplace area, tools,and equipment.
1. Cleaning materials areidentified according tospecified application andprocedures
2. Workplace area, tools,materials and equipment arecleaned using specifiedcleaning materials.
3. Workplaces are in safe
condition in accordance withsafety regulation practices.
LO2. Cleanworkplace area,materials, toolsand equipment.
Activity No.1Performing cleaning in specificareas of the workplace.
Writtenexamination
2 hours
Procedures in dispensingand retrieval of materials;tools, and equipment
Things to be consideredin returning the borrowedtools and equipment.
1. System for requesting,borrowing and returning ofmaterials, tools, andequipment is followed andimplemented.
2. Form used is completely
LO3. Systematizedispensing andretrieval ofmaterials, tools andequipment
1. Filling-up needed forms
barrowers slip
requisition form2. Locating and/or returning
tools and materials indesignated areas in the
Writtenexamination
Performanceassessment
2 hours
-
8/2/2019 CG_DOMRAC
6/6
K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS RAC SERVICING (DOMRAC)
(Exploratory)
*TWG on K to 12 Curriculum Guide version January 31, 2012 6
Content Standard Performance StandardLearning
CompetenciesProject/ Activities Assessment Duration
filled-up and filed.3. Borrowed tools and
equipment are returned todesignated area.
4. Materials are consumed asrequested.
tool room.
37 hours