Ceramic pulley lagging
-
Upload
roy-luo -
Category
Engineering
-
view
262 -
download
1
Transcript of Ceramic pulley lagging
Ceramic pulley lagging
Ceramic pulley lagging:
Kingcera ceramic lined belt pulley is adopting the new methods. We vulcanized our wear resistant ceramic into the rubber and
wrap onto the pulley. Beside, our lining which have troughs between the ceramic are good for draining the water and clay, so
that it can ensure the working when the condition is rigorous. It not only can prevent the pulley from slipping, can also
prolong the pulley's service life span.
Technical Specifications:
Item Index
Ceramic wear material ≥95%
Density 3.65g/cm3
Porosity < 0.1
Compressive Strength ≥1700 Mpa
Rockwell Hardness ≥85 HRA
Vickers Hardness ≥1000 HV10
Fracture Toughness(KIC) ≥4.5 Mpa.m1/2
Bending strength ≥290Mpa
Wear volume ≤0.05 cm3
ASTM G65 Relative Factor 9-11
Thickness 8mm
Rubber Natural
Tensile Strength(TSB) ≥ 15 Mpa
Hardness 60 +/- 5 Shore A
Elongation 450%
Resilience 65%
Thickness 8MM
Manufacturing:
Clear advantages:
--- Long lifetime
--- Maintenance free operation
--- No operation interruption
--- No production losses
--- Reduced pressure losses and lower energy cost
--- Wear resistant and corrosion resistant
--- Deviation resistant
Certification:
EXPLORE PROJECT BY COMPANY
Add: No. 8 Lixing West Road, Changsha, Hunan Province, China
Sale manager: Roy Luo Tel: +86-731-84019856 Fax: +86-731-84069186 Moblie: +86-18570396817 E-mail: [email protected]/[email protected]
Web: www.kingcera.com