caval moldovenesc
-
Upload
prisacariu-maria -
Category
Documents
-
view
98 -
download
3
description
Transcript of caval moldovenesc
![Page 1: caval moldovenesc](https://reader036.fdocuments.net/reader036/viewer/2022072107/55cf98e4550346d0339a499f/html5/thumbnails/1.jpg)
I don't have a tilinko. Yes they are narrow bore.
I measured my Moldavian A kaval for Francis de Villiers here when he asked a few weeks ago. This is the email I sent him:
Moldvai kaval in A, one-piece elder, by Feri Szegercz from Georgheni, RomaniaNote the labium is on the LOWER side
overall length: 74.5 cmext dia: 26mmbore not very circular (done with 2 augers)int dia at bottom end: 16.2-16.9mmdia of block: 17.9mmlength of block: 21.9mmarea cut off block for windway: 1.12cm at mouth end, 0.7cm at labium endabout 1mm of chamfer at the windway endvoicing opening: 0.65cm long, 0.55cm wide, labium length: 2.0cmwall thickness at labium: 0.52cm one side, 0.47cm the otherlabium very slightly curved concentrically with the bore and slightly concave longitudinally, maybe 0.5mm each way
fingerhole centres from bottom:12.1cm14.8cm24.4cm28.3cm31.6cmfingerholes all 0.77cm long and 0.64cm wide except for the bottom one, about 1mm smaller all round
The "A" Kaval whistle plays these scale notes in the low octave: A B C D# E F
Lungime de la vrana pana la capat: 72.3
Si – 16.7 %
Do – 20.5 %
Re# - 33.7 %
![Page 2: caval moldovenesc](https://reader036.fdocuments.net/reader036/viewer/2022072107/55cf98e4550346d0339a499f/html5/thumbnails/2.jpg)
Mi – 39.1 %
Fa – 43.7 %