Catalogue DERANCOURT 2014- EN...
Transcript of Catalogue DERANCOURT 2014- EN...
Our workshops house various specialities such as the injection of thermoplastics and the manufacture of our
moulds, the machining of technical parts on digitally-controlled machines, mechanical welding, striking on mechanical
presses, a foundry for moulded aluminium parts and a complete dipping line for insulation of the tools .
We are present in many regions of the world in collaboration
with international partners.
Finally we are actively involved in standardisation work as
we are a member of the UTE/ CEF 78 commission for live
working .
On our website : www.derancourt.com you will find the on-line catalogue,
video demonstrations and information about new products .
GENERAL OVERVIEW
Symbol indicating the existence of
a demonstration video
1996/6135.7
2
DERANCOURT®
DERANCOURT was founded in 1970. We are located in the south of
FRANCE near Perpignan .
Aerial p
hoto
: F.
Hédelin
We specialise in the design, manufacture and marketing of tools,
equipment and devices used for operations on facilities and structures
in the electricity, gas and telecommunications fields .
Our quality assurance system is ISO 9001 certified by the AFAQ .
Our sales department is divided into four regions for
France and our sales staff are ready to provide you with
all information and similarly our sales engineers will
meet you on your premises. Do not hesitate to ask them
for demonstrations .
on
We have an integrated design office for the design and development
of our products as well as a laboratory which hosts mechanical,
electrical and climatic testing resources .
Our objectives:
Hédelin
elin
sts me
- Tools adapted to the new technological levels,
- Innovation by participating in the search for new technical solutions,
- Safety and the continuous improvement of products
and the mhouse vari
ing of
n by par
ty
THE PRODUCTS
3
DERANCOURT®
You will find a wide choice of tools, equipment and devices here for operations on structures and
electrical facilities in the context of preventing electrical risks covered by the NFC 18-510 standard .
Our own production is complemented by a complementary range of tools and equipment, selected for their quality,
compliance with the standards and regulations in force and enabling us to provide the fullest possible offering.
We offer three product families:
DERANCOURT TOOLS
bringing together all the tooling families: insulated tools 1000V, tools for the preparation of cables, crimping,
general tools, gas tools...
DERANCOURT SAFETY bringing together insulating protective equipment, PPE, absence of voltage testers, earthing devices, signage,
lock-out, measuring devices, harnesses, ladders...
DERANCOURT LINES
bringing together the accessories for mounting aerial cables, anchors and connections, installation equipment, bird protection...
Whether these are for the non-live working operations bringing together for example lock-out operations
(separation – immobilisation– identification – testing of absence of voltage-earthing and short-circuiting)
or live working on structures (Work Performance Conditions, Technical Data Sheets) and live working on facilities.
Such as the tools, equipment and devices listed in the standards on live working on the following low voltage
facilities :
NFC 18-505-2-1 for vehicles and machines with combustion engines, electric motors or hybrid engines.
NFC 18-505-2-2 for industrial and tertiary facilities.
NFC 18-505-2-3 for operations on stationary sets of batteries .