Catalogue 2011

download Catalogue 2011

of 51

  • date post

    09-Mar-2016
  • Category

    Documents

  • view

    231
  • download

    5

Embed Size (px)

description

Catalogue 2011

Transcript of Catalogue 2011

  • CATALOGUE 2011CATALOGUE 2011EN

  • CATALOGUE2011

    INTERDENT d.o.o.

    SALESSI - 3000 CELJE

    Opekarnika cesta 26SLOVENIA

    Telefon: +386 (0)3 425-62-00Telefax: +386 (0)3 425-62-02E-mail: info@interdent.cc

    PRODUCTIONSI - 3342 GORNJI GRAD

    Dol 1aSLOVENIA

    Telefon: +386 (0)3 839-24-00Telefax: +386 (0)3 839-24-15

    E-mail: interdent.proizvodnja@siol.net

    www.interdent.cc

  • 2PRESENTATION OF THE ENTERPRISE

    Interdent ranks among the best European producers of dental consumables. We have been keeping abreast with cutting-edge technologies for over 30 years, making sure our products are user- and environmentally friendly and fully compliant with European standards and regulations.

    ActivitiesIn addition to our core activity of production of materials for work in dentistry labs and practices, we also offer our users education and training at practical workshops in a modernly equipped dental surgery room, and prosthetic facilities and a dental laboratory, with experienced lecturers.

    Product qualityThe quality of our products is under constant scrutiny of our development department and our testing lab where existing products are tested and improved, and new products are developed to meet your needs.

    VisionCustomer satisfaction is the goal of all our efforts to which all employees are contributing day-in day-out. We are devoted to close cooperation as we are striving for the same goal which is a patient satisfied about the functionality and aesthetics of the product.

    MarketsOur products are present in over 40 countries. We are looking to expand our sales network to all five continents.

    The headquater of Interdent Celje, Slovenia

    Production fascilities Interdent, Gornji Grad, Slovenia

    Production of dental alloys

  • 3EDUCATIONAL CENTRE

    In our modern equipped Educational centre we are offering expert, theoretical and practical training for beginners and those who want to improve their knowledge with new technologies.

    Theoretical lectures are taking place in our lecture room with the newest audio and video equipment, where 40 students can participate.

    For the practical part of the course we have at hand two contemporarily equipped laboratories with 12 and 4 working places, where all materials are at disposal which help each participant in a course to test in practice all new technologies.

    Workshops for stomatologists can be held in two dental offices, whereby the implant surgery is equipped with an audio - video connection to the lecture room.

    Course summaries for dental technicians: course on metal constructions precision casting, initial and advanced courses on metal-free ceramics, initial, advanced and master courses on metal ceramics, initial and advanced course on skeleton prosthesis, initial and advanced course on combined works, courses on individual glides, milling technics, Erkforom 3d - thermoforming system making out total prosthesis with Gelcast system, modelling wax-up technique bio-logical setting up denture, anchoring in prosthetic substitutes, Cerec In-lab MCXL CAD/CAM computer system of making constructions.

    Contents of courses for stomatologists: implantology fixed prosthodontics composite fillings cementation prosthodontics care of endodontically treated teeth with posts reinforced composite fibers endodonty biological teeth placement teeth whitening sterilization

    Courses are conducted by acknowledged home and foreign lecturers demonstrators

    Authorized educational centres Vita and Sirona.

    For detailed information about contents and terms please be free to call the number +386 (0)3 425 62 37 or +386 (0)3 425 62 00 ( Mrs. Ura Zagoen).

  • 4NOTES

  • 5MODELLING 14 - 21

    Modelling

    DUPLICATING, INVESTING AND CASTING 22 - 30

    Duplicating, investing and casting

    PRECIOUS METAL ALLOYS 31 - 32

    Precious metal alloys

    ACRYLICS 33 - 37

    Acrylics

    EQUIPMENT 48

    Equipment

    PREPARATION OF WORKING MODELS 6 - 13

    Preparation of working models

    CERAMICS ACCESSORIES 42 - 43

    Ceramics accessories

    DENTAL SURGERY ACCESSORIES 44 - 47

    Dental surgery accessories

    SANDBLASTING AND FINISHING 38 - 41

    Sandblasting and finishing

    1

    2

    3

    9

    4

    5

    6

    8

    7

  • 61ISO 6873

    Colour: ivory/gold-brownWater : powder ratio: 20 ml water / 100 g powderMixing time (manual): 15 secondsMixing time (vacuum): 60 secondsWorking time: ca. 5 minutesSetting time: ca. 12 minutesSetting expansion 0.07 % after 2 hCompressive strength: 60 MPa after 2 hHardness: 250 MPa after 24 h

    Synthetic extra hard stone with high resistance. It is suitable for making working model for partial denture and fixed prosthetics work. It is a thixsotropic stone that gives very sharp, clear edges and has very smooth surface. REF 0982 alu-sack 4 kg ivoryREF 0968 pail 5 kg ivoryREF 0969 pail 20 kg ivoryREF 0962 sack 25 kg ivory

    REF 0981 alu-sack 4 kg gold-brownREF 0951 pail 5 kg gold-brownREF 0952 pail 20 kg gold-brownREF 0953 sack 25 kg gold-brown

    INTERROCK New Extra hard stone Type IV

    ISO 6873

    Colour: saharaWater : powder ratio: 23 ml water / 100 g powderMixing time (manual): 15 secondsMixing time (vacuum): 60 secondsWorking time: ca. 5 minutesSetting time: ca. 10 minutesSetting expansion 0.10 % after 2 hCompressive strength: 49 MPa after 2 hHardness: 150 MPa after 24 h

    Extra hard synthetic stone with good flow properties. It is suitable for making master models, individual models in fixed prosthetics and models for partial denture.

    REF 0983 alu-sack 4 kgREF 0971 pail 5 kg REF 0972 pail 20 kgREF 0955 sack 25 kg

    INTERSTONE New Extra hard stone Type IV

    INTERDUR Hard stone Type III

    ISO 6873

    Colour: blueWater : powder ratio: 26 ml water / 100 g powderMixing time (manual): 15 secondsMixing time (vacuum): 60 secondsWorking time: ca. 4 minutesSetting time: ca. 9 minutesSetting expansion 0.15 % after 2 hCompressive strength: 40 MPa after 2 hHardness: 120 MPa after 24 h

    High quality hard stone for production of first class prosthetic models. Its extra surface density is ideal for use in removable prosthetics. It is also recommended for antagonistic models.

    REF 0956 pail 5 kg REF 0958 pail 20 kg REF 0957 sack 25 kg

  • 71ISO 6873 Colour: light blueWater : powder ratio: 30 ml water / 100 g powderMixing time (manual): 15 secondsMixing time (vacuum): 60 secondsWorking time: ca. 6 minutesSetting time: ca. 9 minutesSetting expansion 0.20 % after 2 hCompressive strength: 30 MPa after 2 hHardness: 80 MPa after 24 h

    Synthetic hard quality multipurpose stone. It is suitable for making master models in total prosthetics work, situations models, base crown (secondary) part of crown and bridge die stone model. The high flow characteristics ensure accurate reproduction of all details from the impression. REF 0973 pail 5 kgREF 0974 pail 20 kgREF 0965 sack 25 kg

    BLUE STONE Type III

    ISO 6873 Colour: yellowWater : powder ratio: 30 ml water / 100 g powderMixing time (manual): 15 secondsMixing time (vacuum): 60 secondsWorking time: ca. 6 minutesSetting time: ca. 9 minutesSetting expansion 0.20 % after 2 hCompressive strength: 30 MPa after 2 hHardness: 80 MPa after 24 h

    Synthetic hard quality multipurpose stone. It is suitable for making master models in total prosthetics work, situations models, base crown (secondary) part of crown and bridge die stone model. The high flow characteristics ensure accurate reproduction of all details from the impression.

    REF 0975 pail 5 kgREF 0976 pail 20 kgREF 0966 sack 25 kg

    YELLOW STONE Type III

    ORTHOPLASTER

    ISO 6873

    Colour: whiteWater:powder ratio: 27 ml water / 100 g powderMixing time (manual) 15 secondsMixing time (vacuum) 60 secondsWorking time ca. 6 minutesSetting time: ca. 9 minutesSetting expansion max. 0.15%Compressive strentgh 40 MPa after 2hHardness: 120 MPa after 24h It has good flowing properties that allow reproducing of all details in the impression. The model has smooth surface and good hardness. Particularly recommended for making study models in orthodontics.

    REF 0978 pail 5 kgREF 0984 pail 20 kg REF 0985 sack 25 kg

  • 81

    ARTIPLASTER

    ISO 6873

    Colour: whiteWater : powder ratio: 30 ml water / 100 g powderMixing time (manual): 15 secondsMixing time (vacuum): 60 secondsWorking time: ca. 2 minutesSetting time: ca. 3,5 minutesSetting expansion 0.03 % after 2 hCompressive strength: 21 MPa after 2 hHardness: 60 MPa after 24 h

    Gnathology requires special stones for articulating, whereby expansion ratio is of extreme importance. After eight days the expansion ratio of ARTIPLASTER is limited to expansion 0.03%.

    REF 0959 pail 5 kg REF 0961 pail 20 kg

    Colour: whiteWater : powder ratio: 50 ml water / 100 g powderWorking time: ca. 4-5 minutesSetting time: ca. 9,5 minutesSetting expansion 0.20 %Compressive strength: 16 MPa after 2 hHardness: 20 MPa after 24 h

    A general purpose dental plaster for use in normal investing technique prior to acrylic processing.

    REF 6624 sack 25 kg

    ALABASTER

    REF 3401 occludator smallREF 3402 occludator large

    PACKAGE FOR PLASTER MODELS

    Package for plaster prosthetic models is used for protecting plaster models from damage during sending or ca