Catalogo fibre composite en lowres

ww

w.m

ater

ialic

ompo

siti

.com

COMPOUNDCOMPOUNDFIBERSFIBERS

FIBREFIBRECOMPOSITECOMPOSITE

Aldebranmaterial i compositi

Basalt Products

Carbon Products

Combo Mat

Fiberglass Mat

Fiberglass Roving and Yarn

Fiberglass Fabric

Fiberglass Wool

Kevlar Products

Rock Wool

2

�

CON

TACT


Aldebraninnovative engineeringinnovative engineering

CONTACT

Via Dalmine 10/A24035 Curno (BG)P.IVA 02693840163tel. +39.035.611.942fax. [email protected]

3

�

IND

EX

INDEX

Basalt Products . . . . . . . . . . . . . . . 3

Carbon Products . . . . . . . . . . . . . . . 6

Combo Mat . . . . . . . . . . . . . . . . . 7

Fiberglass Mat . . . . . . . . . . . . . . . . 9

Fiberglass Roving and Yarn . . . . . . . . . 15

Fiberglass Fabric . . . . . . . . . . . . . . 19

Fiberglass Wool . . . . . . . . . . . . . . 28

Kevlar Products . . . . . . . . . . . . . . 30

Rock Wool . . . . . . . . . . . . . . . . . 31

4

�

Aldebran

material i compositi

5

�

BAsA

lT P

ROD

uCT

s

BASAlT YARN WITh STAINlESS STEEl ThREADS REINFORCEDThis product uses basalt yarn 33tex or 66tex with 1 ~4 strands to combine with stainless steel sus 304 or sus 310 threads, which required by special production. Each bobbin is 1kg. Besides, we can supply spec. of finished product with certain TEX value and diameter of stainless steel threads by clients’ demands.

BASAlT NEEDlED MATIt is mat by chopped basalt roving and then puffed, carded and needled.It is a good product for air-filtering and heat insulation and preservation.This kind of mat is chemical resistant and can be used under 800°C

BASAlT BIAXIAl FABRIC OF +/-45 OR 0/90 DEgREEThis kind of basalt fabric is made from basalt roving arranged along 0/90 degree or ±45 degree by weaving machine imported from Germany.size: 1.27m (W)

BASAlT ChOPPED STRANDIt is processed to be 3mm, 6mm, 9mm, 12mm, 24mm, 48mm and 96mm strands from basalt roving of filament diameter 11 ~ 13µm, which is as the reinforcement in for cement, thermosetting and thermoplastic resin.Weight: 15~25kg/bag

BASAlT PRODuCTS

6

�

BAsA

lT P

ROD

uCT

s Aldebran


PlAIN WEAvED BASAlT FABRICThis kind of basalt fabric is made by basalt roving in plain way.Area weight: 100g/m2 ~ 640g/m2

size: 1 m

BASAlT BRAIDED TAPEIt uses basalt yarn as raw material to braid into tape with thickness of 0.1mm and 0.2mm. As per requirement by client, the width can be supplied within 15mm~200mm and each roll is 30m to 50m.This kind tape can stand 800°C and be used in acid and alkali environment.

BASAlT YARNThe basalt yarn uses basalt roving with filament diameter of 7µm and 9µm then be twisted in 60~100 per meter. usually, the twist direction is Z or s. This yarn can be used to produce basalt fabric.Specification: 33TEX, 1/0,1/2 ,1/3,2/2 66TEX, 1/0, 1/2, 1/3, 2/2Each bobbin is 3kgs and 6 bobbins in each carton

uNIDIRECTIONAl BASAlT FABRICThis kind of unidirectional basalt fabric is made from basalt roving arranged in warp direction and thermosol roving in weft direction, which is used for reinforcement of civil engineering.Area weight: 200g/m2, 300g/m2 and special GsM can be discussed then. Width: can be decided by client

BASAlT NON-TWIST REINFORCED ROvINgIt is non-twist reinforced roving made by basalt fiber of filament diameter 11~13µm as per 1200tex, 2400tex and 4800tex.Weight: 18kg/bobbin

7

�

BAsA

lT P

ROD

uCT

s

BASAlT FIBER BRAIDED ROPEThis rope uses basalt fiber to be braided with diameter from 3mm to 30mm. Then length of each roll is 200m. Because of basalt fiber has properties of resist to heat, acid and alkali, it can be used as sealed and reinforced material under 800 Centigrade and chemical environment.

SATIN WEAvED BASAlT FABRICThis kind of basalt fabric is made by satin weaving way.Area weight: 140g/m2 ~ 640g/m2

size: 1m (W)

8

�

CARB

ON

PRO

Du

CTs


uNIDIRECTIONAl CARBON FABRICThis kind of unidirectional basalt fabric is made from carbon fiber roving arranged in warp direction and thermosol roving in weft direction, which is used for weaving carbon fabric. Area weight: 100g/m2 ~ 500g/m2 Width: 1m

SATIN WEAvED CARBON FABRIC.TIFThis kind of carbon fabric is made of carbon fiber by satin weaving way.Area weight: 160g/m2 ~ 600g/m2

size: 1m (W)Note: the special width can be discussed then

PlAIN WEAvED CARBON FABRIC (CARBON FABRIC)This kind of carbon fabric is made of carbon fiber by plain weaving way.size: 1m or 2m (the max width is 2m)Area weight: 100g/m2 ~ 640g/m2

CARBON PRODuCTS

9

�

COM

BO M

AT

COMPOSITE MAT OF SINglE WARP AND DOuBlE WEFTIt is combo mat combined by woven roving (it is single warp and double weft, the GsM is 600g/m2, 800g/m2) and chopped strand mat (450g/m2) to form composite mat of 1050g/m2 or 1250g/m2

Note: we can make adjustment on roving and CsM weight as per customer’s requirement.

WOvEN ROvINg COMPOSITE MAT OF ThIN ROvINg440g/m2 Woven Roving Composite Mat of Thin Roving

BIAXIAl COMBO MAT (0/90 DEgREE)It is combo mat that use 0/90 degree biaxial fabric and CsM stitched together by polyester thread. It is widely used in high technical FRP production.Width: 1.27m and 2.54mArea weight: 900g/m2, 1050g/m2, 1250g/m2 and 1750g/m2

Note: We can make adjustment on roving and CsM as per customer’s requirements.

BIAXIAl COMBO MAT (+/-45 DEgREE)It is combo mat that use polyester thread to stitch ±45 degree biaxial fabric with chopped strand mat together. It can be applied in high technical FRP production.Area weight: 900g/m2, 1000g/m2 and 1200g/m2

Width: 1.27mThe different length can be suppliedNote: we can make adjustment on roving and CsM weight as per customer’s requirement.

COMBO MAT

10

�

COM

BO M

AT


CORE COMBINATION MATIt is the multi-layered combination mat .It consists of a PP core sandwiched between chopped glass fibers and stitch together, which is used for boat making. As usual, the area weight of PP core is 150g/m2 or 250g/m2 and area weight of chopped glass fibers is 300g/m2, 450g/m2 or 600g/m2.Width: 1.2mRoll weight: 30kg ~ 60kg/rollArea weight:780g/m2 (300/180/300), 1080g/m2 (450/180/450), 1380g/m2 (600/180/600), 850g/m2 (300/250/300), 1150g/m2 (450/250/450) 1450g/m2 (600/250/600.

FIBERglASS PE NON-WOvEN COMBO MAT It is the new product for roofing and underground waterproof project and making bitumen waterproof roll material. Adding 280 threads of fiberglass roving in warp and 230 threads of fiberglass roving in weft on PE non-woven fabric, it is made PE non-woven mat with 75g/m2, so the tensile strength can be 260N in warp and 210N in weft.It has better tensile strength than normal roofing tissue, but with low price.GsM: 75g/m2size: 1m x 1500m/rollOne 40’HQ load 115 rolls, 172500m2

0/90 BIAXAIl FABRIC COMPOSITE WITh POlYESTER It is product that add one layer polyester on the back of 0/90 biaxial fabric. This is to meet the special requirement of modern industry when producing FRP products.The finished product is 1000g/m2 and width is 1.27m.Weight: 60~80kg/rollspec.: 0/90 biaxial fabric is 900g/m2 and polyester is 100g/m2

COMBO OF WOvEN ROvINg AND ChOPPED STRAND MATIt is combo mat that use polyester thread to stitch with woven roving and chopped strand mat. It is raw material of FRP sheet and yacht.Width: 1.27m or 2.5mWeight per roll: 60kg or 80kgGsM: 950g/m2(500g woven roving + 450g CsM) 1050g/m2 (600g woven roving + 450g CsM) 1250g/m2(800g woven roving +450g CsM)Other special area weight can be discussed and supplied.One 20’GP can load 168 cartons packed with 16 pallets, total 10080kgs as per customer’s requirements.

11

�

FIBE

RGlA

ss M

AT

SlITTED FIBERglASS TISSuEIt is fiberglass tissue in different weights slitted into certain width and then supplied in roll according to customer’s requirement.

STOCK FOR TISSuEstock for Tissue

FIBERglASS TISSuEIt is combo mat that use 0/90 degree biaxial fabric and CsM stitched together by polyester thread. It is widely used in high technical FRP production.Width: 1.27m and 2.54mArea weight: 900g/m2, 1050g/m2, 1250g/m2 and 1750g/m2


FIBERglASS MAT

MAChINE FOR FIBERglASS TISSuEMachine for Fiberglass Tissue

12

�

FIBE

RGlA

ss M

AT


SlITTED FIBERglASS CONTINuOuS FIlAMENT MATAs per customer’s requirement, our continuous filament mat can be cut into different width in roll for customer’s application.

FIBERglASS CONTINuOuS FIlAMENT MATIt is made of continuous fiberglass strands with appropriate binder and can be used as raw material to produce FRP products.GsM: 40g/m2 80g/m2 160g/m2 200g/m2

One 40HQ can load 616 cartons, 7390kg totally.

FIRE-PROOF BlACK TISSuE (BIg ROll)Fire-proof Black Tissue in Big Roll, 1 x 50m

FIREPROOF BlACK TISSuEIt is white tissue via dye and chemical fireproof process.Area weight: 60g/m2

Width: 1.22mlength: 500m/rollloading: one 20’ container can load 78 rolls, 47580m2 totally.

FIBERglASS ROOFINg TISSuEIt is material for roof’s water-proof. The tissue has a reinforced thread between every 15mm to improve warp’s tensile strength.GsM: 45g/m2, 50g/m2 or 60g/m2, 75g/m2, 120g/m2

Packing: One 40’HC can load roofing tissue with reinforced threads 50g/m2, 1m x 1500m/roll with 115 rolls, total 172500m2. And load 60g/m2, 1m x 1150m/roll with 115 rolls, total 132250m2.

13

�

FIBE

RGlA

ss M

AT

SlITTED STITChED MATAs per customer’s requirement, stitched fabric can be cut into different widths in roll for customer’s application.

NEEDlED ChOPPED STRAND MATIt is mat chopped roving into 50mm and then be stitched by polyester thread, and as raw material to produce FRP products. Owing to free of any binder, it is compatible with resin fast and suitable for continuous mechanization production of FRP products.Width: 1.0~1.6mArea Weight: 250g/m2, 300g/m2, 375g/m2, 450g/m2, 600g/m2

Weight per roll: 35kgPacking: One 20’ container can load 9370kg.Besides, it can be supplied in tape form.

ChOPPED STRAND MAT BY PAllETChopped strand Mat of 0.25m Width by Palle.

SlITTED ChOPPED STRAND MATChopped strand Mat can be slitted twice and rolled according to different widths as per customer’s requirement, such as 0.25m x 7kg/roll.

ChOPPED STRAND MAT FOR AuTOMOBIlE INSIDE DECORATINgIt is chopped strand mat (100g/m2) with width 1.27m or 2.6m special for automobile inside decorating. And it is suitable to produce automobile top decoratings.

15

�

FIBE

RGlA

ss M

AT

PE NON-WOvEN MATTo improve the tensile strength of PE non-woven fabric in warp and weft direction, we add one layer of PE net with 380g/m2 in the middle to compound and needled with PE non-woven fabric which is 450g/m2 on each side. This compound mat is suitable for special civil engineering.The reinforced mat is 1280g/m2 and the size is 6m (Width) x 30m (l)/roll.

INSulATED MATIt is made by wet way, used in the production of lamps and lanterns and small household appliances.GsM: 200~260 g/m2

size: 1.2m x 50m/roll.

COMPRESSED CERAMIC FIBER MATIt is ceramic fiber pressing part, which is made by ceramic fiber mat in pressing way as per the size and shape of client’s requirement. The specification of ceramic fiber mat is 160kg/m3, 20mm thickness.

POlYESTER MATIt is a kind of polyester mat of which basic material is PE non-woven fabric and then coated with 20% Basf resin from Germany. It’s standard roll size is 1.01 ~ 1.02m x 480m ~ 1000m/roll. And area weights available in our company are 120g/m2, 140g/m2, 180g/m2, 200g/m2 and 250g/m2.

POlYESTER ThIN MATIt is thin mat made by polyester fiber, owing it is anti-Hydrofluoric acid, so it is a reinforced material of special anti-corrosion FRP products.GsM: 20g/m2, 30g/m2, 45g/m2, 50g/m2, 70g/m2

Width: 1mlength: can be decided by client.

16

�

FIBE

RGlA

ss M

AT


CARBON FIBER ThIN FElTAdopting wet forming technology, it is a kind of carbon fiber thin felt made from PAN, which is strong acid and alkali resistant, and can be used to filter erosive gas or liquid. It also can be applied to shell of carbon fiber reinforced plastics, with the thin wall and light weight, which also possesses the high strength to resist creeping. This product has the electric conductivity and is an ideal material to manufacture the fuel cell and the exothermic component. using this material to decorate the electronic apparatus area, it can obtain the multieffects of the electromagnetism or radio-frequency shielding and electrostatic protection.Width: 0.5m, 1m, 1.25mlength of roll: 50mm2 100mm2 200mArea weight: 15g/m2, 20g/m2, 30g/m2, 40g/m2, 50g/m2, 60g/m2, 80g/m2

Resistance: ≤10ΩCarbon fiber diameter: 6~7µm.

ChOPPED STRAND MAT(FIBERglASS MAT)It is a mat with different GSM which made of fiberglass chopped strands with 50mm adding powder or emulsion binder. It is raw material to produce FRP products.Width: 1m, 1.04m, 1.25m, 1.27m, 1.86m, 2m, 2.6m, 3m, 3.2mGsM: 100g/m2, 200g/m2, 225g/m2, 300g/m2, 375g/m2, 450g/m2, 600g/m2, 800g/m2

Weight per roll depending on the different width: 30kg, 35kg, 40kg, 45kg, 70kg, 80kgPacking: One 20’ container can load 10080kg with width of 1.04m or 9730kg with width of 1.2m, 1.25m or 1.27m.One 40’HC can load 20520kgs with width of 1.04m or 20510kgs with width of 1.2m, 1.25m or 1.27m.The loading quantity with pallets can be discussed then.

PE PuFFY MATThe polyester puffy mat is adopted PE fiber and appropriate binder which to form by thermal processed.Finished area weight of mat is 80g/m2~160g/m2

Thickness: 3mm~12mmsize: 1.2m (W) x 30m(l)/rollThis mat is suitable to be used for air filtering and also as liner in garments, case and bags.

CERAMIC FIBERglASS MATAluminum Silicate Fiberglass Mat (ceramic fiberglass mat)It is a needled mat from aluminum silicate fiber and as essential material in industrial kiln for heat preservation.Thickness:6mm~50mm.Density: 125kg/m3, 160kg/m3.Width:0.61m and 1.22m.length per roll: 10~50m.This mat can be divided in two kinds according to different working temperature:1)High Aluminum mat :Working temperature:1250°C and AL2O3≥52%2) High zirconium mat:Working temperature: 1350°C and ZrO2≥39%One 40’HQ can load about 410rolls, with specification of 130kg/m3 or 160kg/m3, 1.22m x 20m /roll.

17

�

FIBE

RGlA

ss R

OVI

NG

AN

D Y

ARN

FIBERglASS TWISTED YARNIt is yarn that after receding and twisting fiber with diameter of 5.5µm, 8µm, 9µm and 11µm and be used to make various fiberglass fabrics.Specification: EC75, EC150, EC225, EC450, 1/0, 1/2, 1/3, 1/4.Twist: 28~140 per meter, Z or s.Packing: One 20’ container can load 8 tons to 12 tonsNote: If inner bobbin with paper corn, then net weight of roving is 500g. If inner bobbin with plastic core, then net weight of roving is 3kg.

lOOSE FIBERglASS SlIvER AND TAPEIt is E-glass roving via hacking and loosing with free of any binder, the filament diameter is 7µm~11.5µm, the length is 50mm~200mm.The material is alkali and acid resistance. And the standing temperature is from -40°C degree to 635°C degree. It is the raw material of atmosphere filter, special made to tape and mat of sound insulation and heat insulation.One 40’HQ can loads 9 tons with compressing packing.

FIBERglASS SMC ROvINgIt is roving to make sMC material sheet and can compatible with resin well. It has good stiffness,, easy cutting and low static. And the fiber is well-proportioned when mold to SMC. Filament diameter: 11µm or 13µmRoving density: 2400 tex or 4800 texFinish: silaneIt can compatible with epoxy and polyester resin.Packing: One 20’container can load 20 pallets, total 18 tons.

S-glASS YARNusing silicate-alumina-magnesium series as the raw material, we twist it to produce s-glass yarn. The sizing is silane type and has good performance of corrosion-resistance. Filament diameter is 8um, and it is 34tex or 68tex, which is specially used to weave s-glass fabric. Whole bobbin is supplied with net weight 500g.

FIBERglASS ROvINg AND YARN

18

�

FIBE

RGlA

ss R

OVI

NG

AN

D Y

ARN

Aldebran


BASAlT NON-TWIST ROvINg FOR WEAvINgIt is the roving for weaving made by basalt fiber of filament diameter 9µm ~ 11µm.Yarn density: 200 tex, 300 tex, 400 tex, 600 tex and 800 tex.

glASS STAPlE-FIBRE YARNIt is processed by C-glass napped fiber with diameter of 10.5µm and sight twist. This kind of yarn is anti-corrosion, anti-animalcule, non-burning and has good character of sound insulation and soakage with resin, which is used to make water-proof decorating wallpaper and as the based material for battery separator producing and also to be filter yarn for Auto-silence equipment.Yarn density: 156tex~1200texWeight: 4.5kg/bobbinPacking: paper-coreDelivery: in roll.

PTFE COATED FIBERglASS YARNIt is made by normal fiberglass twisted yarn coated with PTFE.

ARAMID YARNThis kind of yarn is weaved from Kevlar fiber.

FIBERglASS TEXTuRIzED YARNIIt is yarn that is bended and texturized by high pressure air and can be used to make fabric for filtering and insulating.standing temperature: 550°CLow conductive coefficient: ≤0.035kedl/m.h.°CFilament diameter: 9µm or 11µmRoving density: 430tex~2400texPacking: one 20’container can load 8 tons.

19

�

FIBE

RGlA

ss R

OVI

NG

AN

D Y

ARN

PvC COATED FIBERglASS YARNBased on fiberglass yarn, coating PVC which meet European Union’s requirement of Environment protection on each filament of yarn.Diameter: 0.28mm, 0.33mm, 0.35mmWeight: 2.5kg/bobbinIf you have special requirement of diameter, we can also process it.

C-glASS NON-TWISTED ThIN ROvINgOur company can produce C-glass non-twisted thin roving with low tex value of 100tex ,200tex, 300tex, 400tex, 600tex and 800tex which to be woven of mesh and fabric. Each bobbin weights 6kgs or 18kg.

FIBERglASS WEAvINg MAChINEFiberglass Weaving Machine.

FIBERglASS ROvINg WRAPPINg MAChINEFiberglass Roving Wrapping Machine.

FIBERglASS ROvINg TWISTINg MAChINEFiberglass Roving Twisting Machine.

20

�

FIBE

RGlA

ss R

OVI

NG

AN

D Y

ARN

Aldebran


hIgh STRENgTh ROvINgThis kind of roving is specially designed for filament winding and pultrusion processes, compatible with epoxy resins, with curing agent of acid anhydride or amine. Finished product has good wearing resistance, low fuzz, efficiently compatibility with resins. It could meet the high bursting strength request, offering most high mechanical strength for pipes or containers. It’s suitable for high pressure pipes and pressure containers.Specifications: 735tex, 1100tex, 2000texCode J201 equals to code OC1588 acid anhydrideCode J202 equals to code OC2348 amineNet weight of each bobbin is 16kg and one 20ft container loads 20 pallets (48 bobbins/pallet----10 pallets, 64 bobbins/pallet-----10 pallets)The annual output by tank furnace is 30,000 tons, with competitive price.

S glASS ROvINg (hIgh STRENgTh ROvINg)The high strength fiberglass belongs to the magnesium-alumina-silicate glass system. Compared with E fiberglass, they have 30-40% higher tensile strength, 15-20% higher modulus of elasticity under condition of 4020, 4600MPa, 100-150oC higher temperature endurance under condition of 82.9, 86.4GPa, 10 times higher fatigue resistance. It also has excellent properties of impact-resistance, corrosion-resistance and it is good wet-out with resin. The roving is always used to make oxygen tank and high pressure pipeline.The popular specification:Filament diameter 8µm---240TEX, 480TEX, 960TEX, 1200TEXFilament diameter 11µm---240TEX, 480TEX, 960TEX, 1200TEX, 2400TEX.

gRC ROvINgIt is alkali resistant roving which used as reinforcement in cement and concrete.There are two kinds roving according to different ZrO2 content of 14.5% and 16.5%. As to usage, there are two types, one is premixed type and another is water-dispersed type.Filament diameter: 13µmRoving density: 2400 Tex or 4800 TexPacking: One 20’ container can load 20 pallets, 48 cartons per pallet(namely 912kgs), total 18.24 tons.Note: We can chop roving into strands with certain length. In case of 6mm, it is 25kg/bag, 40bag/pallet, one 20’container can load 20pallets, total 20 tons. In case of 12mm, it is 20kg/bag, 40bag/pallet, one 20’container can load 20pallets, total 16 tons. In case of 24mm, it is 15kg/bag, 40bag/pallet, one 20’container can load 20pallets, total 12 tons.If mixed loading, we can calculate quantities for clients.

PulTRuSION ROvINgIt is roving as reinforced material in the process of FRP pultursion molding. The roving has properties of congruous tension, few fluffy and can saturate with resin fast.Filament diameter: 11µm or 13µmRoving density: 800tex, 1000 tex, 1200 tex, 1600 tex, 2400 tex, 4400 tex, 4800 tex, 8000 tex, 9600 tex, 10000 tex are available.Finish: silane. It can compatible with epoxy and polyester resin.Packing: One20’container can load 20 pallets (10 pallets: 64 bobbion/pallet and 10 pallets: 48 bobbion/pallet), total 19.2 t.

21

�

FIBE

RGlA

ss F

ABRI

C

NEOPRENE COATED FABRICIt is fiberglass fabric coated with neoprene and then via vulcanization process. The product has properties of anti-oxidation, anti-ozone, anti-corrosion and heat-resistant, which can be used in special environment.Area weight: 500g/m2, 800g/m2, 1000g/m2 2300g/m2, 3200g/m2 etc.Specification: 1.2m (W) x 50m or 100m (L)/rollColor: black or yellowWe can do fastener and edge stitching process as per the size customer requires.

PlAIN WEAvED FIBERglASS FABRICThis kind of fiberglass fabric is weaved by plain way, GSM is 48g/m2 ~ 1000g/m2, we can also add stainless steel threads when weaving high density fiberglass fabric to improve its tensile strength, or the fabric can be treated by dewaxing process as per your requirement (the face of fabric is golden yellow after dewaxing), finished width is 0.91m ~ 2.6m.

WOvEN ROvINg(WR)It is made from direct roving and as raw material to make FRP products.Width: 0.9m, 1m, 1.27m, 1.52m, 2m or 2.5mGsM: 140g/m2, 200g/m2,300g/m2, 400g/m2, 500g/m2, 600g/m2, 800 g/Weight per roll: 40kg, 50kg or 80kgPacking: One 20’ container load 16Ton (without pallet)We can also produce woven roving with double warp and single weft as per customers’ requirement.

FIBERglASS FABRIC

SATIN OR TWIll FABRICIn order to meet client’s requirement of high density or special condition, this kind of fabric weaved by twill and satin of 4 joints or 5 joints or 8 joints. It also can be in dewax process as per your requirement (the face of fabric is golden yellow after dewaxing).GsM: 100g/m2 ~ 1500g/m2Width: 0.91m ~ 2mlength: can be decided by client’s requirement.

22

�

FIBE

RGlA

ss F

ABRI

CAldebran


uNIDIRECTIONAl FIBERglASS FABRIC(IN WARP)It is made from direct roving which arranged in weft direction and then sewed by polyester threads along warp direction. Width: 1 m ~ 2.8mArea weight: 200g/m2, 250g/m2, 300g/m2, 450g/m2, 500g/m2, 550g/m2, 600g/m2, 800g/m2, 1000g/m2, 1200g/m2.

FIRE-PROOF BlACK FIBERglASS FABRICIt is the fabric treated by fire-proof and printing and dyeing. It can be used in special condition.size: 1.2m x 100m/roll.

FIBERglASS TARTAN glASS FABRICThis product is tartan-weaving fabric with certain specification according to customers’ requirements.GsM: 600g/m2, 800g/m2size: 1m x 100m/roll.

FIBERglASS MICA BASAl FABRICIt is a kind of fiberglass fabric used for making insulation wax cloth and mica basic cloth products. It has good power-insulation, high tensile strength and good compatible with resin.This fabric uses plain weave and very thin, which from 0.025mm to 0.09mm and GsM is 17g/m2, 18g/m2, 20g/m2, 25g/m2, 50g/m2 and 85g/m2

size: 0.9m (W) x 1300m ~ 1500m(l.

TEXTuRIzED FIBERglASS FABRICIt is fiberglass fabric that is made from texturized yarn and can be used as filtering, heat insulation and fireproof fabric.Thickness: 1mm~5mmsize: 1~2m (W) x 50m/100m (l)/rollNote: If customers need, we can also put stainless steel wire in production to strengthen the warp tensile strength.

23

�

FIBE

RGlA

ss F

ABRI

C

MAChINE FOR SlITTED WOvEN ROvINgMachine for slitted Woven Roving.

SlITTED WOvEN ROvINgAs per customer’s requirement, woven roving can be cut into different width in roll for customer’s application.

BIAXIAl FABRIC (0/90 DEgREE)It is made from direct roving arranged along 0/90 degree and then sewed by polyester threads.Width: 1.27mArea weight: 430g/m2, 500g/m2, 600g/m2, 800g/m2, 1000g/m2, etc.Weight per roll: 50~80kgNote: We can make adjustment on roving weight of 0 degree and 90 degree as per customer’s requirements.

±45 DEgREE BIAXIAl FIBER glASS FABRICIt is made from direct roving arranged along ±45 degree and then sewed by polyester threads.Width: 1.27mArea weight: 450g/m2, 600g/m2, 800g/m2 and 1000g/m2, etc.Weight/roll: 50~80kg.

uNIDIRECTIONAl FABRIC(IN WEFT)It is weft unidirectional fabric weaved by 62tex roving in warp and non-twist roving in weft, which is suitable for producing special FRP products. Area weight: 450g/m2

size: 1.2m (W) or supplied as per client’s requirement.

24

�

FIBE

RGlA

ss F

ABRI

C Aldebran


NON-TWIST ThIN FIBERglASS FABRICIn order to meet high penetrability and fast compatible with resin and high tensile strength in warp and weft of FRP products, we produce plain weave fiberglass fabric weaved by non-twist thin roving.GsM: 100g/m2, 140g/m2, 200g/m2, 300g/m2

Width: 1m ~ 2mlength: decided by client.

Pu FIBERglASS FABRICIt is made by fiberglass fabric (plain or satin weave) with one side coated Pu(30g/m2~80g/m2) as per client’s requirement, which is used in special condition.

FIBERglASS FABRIC COATED WITh SIlICON RuBBERIt is fiberglass fabric coated with silicon rubber on both sides. The product has properties of heat-resistant, insulation and fire-proof. So it can work from -40~250°C.Areaweight: 400g/m2, 600g/m2, 800g/m2, 1000g/m2, 1200g/m2

Specification: 1.2m(W)X50m or 100m(L°C/rollInsulation grade: 18Kv/nmColor: black, yellow, red or gray.

MAChINE FOR WOvENE COMPOSITE MATIt is combo mat that use 0/90 degree biaxial fabric and CsM stitched together by polyester thread. It is widely used in high technical FRP production.Width: 1.27m and 2.54mArea weight: 900g/m2, 1050g/m2, 1250g/m2 and 1750g/m2


MAChINE FOR SlITTED WOvEN ROvINgMachine for slitted Woven Roving.

25

�

FIBE

RGlA

ss F

ABRI

C

PP NON-WOvEN gEOTEXTIlESIt is made from PP yarn and can be used as under layer of clothes, bag and sofa. Besides,it can be used in medical and fiberglass composites.Area weight: 10~250g/m2

Width(max): 3.2mNote: We can dye and cut as per customer’s requirement.

FIBERglASS FABRIC COATED WITh FluORIN RuBBERIt is new material with properties of anti-corrosion and oil-proof.standing temperature: 300°CThickness: 0.3mm ~ 1.1mmsize: 1m or 1.2m (W) x 50m(l)/rollColor: black or cream-coloredNote: this fabric can be used in fields like aviation engine, chemical industry and electronic.

PE FABRIC COATED WITh vINYl (FIRE-PROOFINg)It is widely used for waterproof van or sealing pipe of air condition.Thickness: 0.38mm, 0.5mmWidth: 1.5mThe length can be supplied as per customer’s requirement.Color: black, brown, yellow, or black on one side and white on the other side.

FIBERglASS FABRIC COATED WITh SIlICONEIt is fiberglass fabric coated with silicone on both sides that can be used in heat-resistant and seal conditions.Area weight: 400g/m2~1800g/m2

size: 1.2m(W) x 50m or 100m(l) /rollColor: gray, yellow, red, black.

SlITTED FIBERglASS FABRIC COATED WITh SIlICON RuBBERIt is glass fabric coated with silicone rubber in different weights slitted into certain width and then supplied in roll according to customer’s requirement.

26

�

FIBE

RGlA

ss F

ABRI

C Aldebran


gRAPhITE FIBERglASS FABRICThis kind of fabric is treated with graphite, which can be used in some special condition as per client’s requirement.

FIBERglASS FABRIC COATED WITh Alu. FOIl ON ONE SIDEIt uses fabric with different area weight and then coated with Al. foil on one side. So this fabric can be used in fire-proof environment.Area weight: 160g/m2, 200 g/m2, 300g/m2, 400 g/m2

Specification: 1.0m x 200m/rol.

FIBERglASS FABRIC COATED WITh PTFEIt is fabric coated with PTFE first and then sintered well.Thickness: 0.08mm, 0.13mm, 0.15mm, 0.18mm, 0.24mm and 0.4mmWidth: 1.2m or 1.27mlength: 50m/rollThe product can stand 300 degrees centigrade. so it can be used as electrical insulation, cable wound and anti-sticky.Note: We can supply fabric in tape form as per customer’s requirement.

FIBERglASS WAll COvERINgIt is made from roving and soft textile fiberglass sliver. And as anticorrosive and environment protection product. There are 24 types of different weaves.Specification: 1m(W) x 25m/50m(L) per rollArea weight: 100g/m2, 130g/m2, 150g/m2, 160g/m2, 180g/m2 or 220g/m2

Packing: One 40’HC can load 56 pallets, 65,000m2 in total.

hIgh SIlICA FIBERglASS FABRICIt is made of high silica yarn and can be used as heat insulation material.SiO2: >/=97%Shrinking rage: ≤2%Continuous working temperature: 900°C~1250°CInstantaneous temperature: 1450°Csoftening point: 11700°CWidth: 0.84m, 0.92m and 1mlength: 50m/rollAre weight: 240g/m2, 300g/m2, 400g/m2, 530g/m2, 600g/m2, 860g/m2, 100g/m2, 1150g/m2 etc.

27

�

FIBE

RGlA

ss F

ABRI

C

BASAlT FABRICIt uses basalt roving as raw material to weave basalt fabric in different ways. Now, we can supply plain basalt fabric, satin basalt fabric, biaxial basalt fabric of +/-45 degree or 0/90 degree, and unidirectional basalt fabric. The gram weight can be produced from 100g/m2~600g/m2 or others as per your requirement.

NEOPRENE FABRIC SAFETY BlANKETIt is edge stitched neoprene fabric with fastened of cupreous eyelets on the side as per the size of customer’s requirement. It has properties of anti-oil, anti-oxidation, anti-ozone, well-closed and heat resistance(-40~150°C). so it is special safety blanket for anti-chemical, anti-ozone condition.Attach the picture of 1.8x3m size for reference

PTFE FABRIC FOR AIR FIlTERINgThis product use fiberglass roving to produce out E-glass fabric with some air holes and then coated with PTFE total weight is 175g/m2 is alkali-acid resistant. And stand temp from -40°C~250°C. so it can be used as air filtering.

EPDM FBERglASS FABRIC(EPDM, short for Ethylene Propylene Terpolymer Rubber)Making use of the EPDM’s properties of oxidation resistant, light acid-resistant, alkali-resistant, grease-resistant, flame-resistant, ozone- resistant and non-rimous, we integrate it with fiberglass fabric to make EPDM fiberglass fabric. It is raw material for automobile parts, sealings on aviation Industry, specially used in high-pressure transport rubber pipe of phosphate Hydraulic and sealings. We can also supply EPDM slurry.Thickness: 1mm, 1.5mm, 2mm, 2.5mm, 3mmSpecification: 1m x 50m/roll.

FIBERglASS FABRIC TREATED WITh vERMICulITEIt is fiberglass fabric after treating with vermiculite to get the high standing temperature of 850°C. so it can be used in high temperature condition.GsM: 500g/m2~1150g/m2

28

�

FIBE

RGlA

ss F

ABRI

C Aldebran


vERMICulITE CERAMIC FIBER FABRICIn order to improve close-grained and fire resistant of ceramic fiber fabric, we coat vermiculite onto the ceramic fiber fabric.Thickness: 2, 3, 4, 5mmsize: 1m x 30m/roll

CERAMIC FIBER FABRICThis kind of ceramic fiber fabric is weaved by ceramic fiber roving and stainless steel threadsThickness: 2mm (900g/m2), 3mm (1300g/m2), 4mm (2000g/m2), 5mm (2400g/m2)standing temperature: 1000°C and 1250°Csize: 1m x 30m/rollIt is good product used in industry furnace and other heat preservation condition.

CERAMIC COATED AluMINuM WATER FIlTER MEShAs per client’s requirement, we produce aluminum water filter mesh with 7 x 7 ~ 17 x 17 and GsM of 200g/m2 ~ 500g/m2, which is special mesh for producing aluminum water filter bag.With coating ceramic powder, this kind of fabric can stand temperature 800°C stably and it is new kind aluminum water filtering mesh.

PROjECTION SCREEN FABRICIt coats black in one side and white in another side on fiberglass fabric with special process.GsM: 500g/m2

size: 1.5m x 100m/roll and we also can process as per the size you require.

KEvlAR FABRIC(ARAMID FABRIC)It uses Kevlar yarn ad raw material using plain or twill weaved way to produce out.The width is 1m and length is 50m or 100m.usually, the gram weights are 62g/m2, 155g/m2, 180g/m2, 200g/m2, 255g/m2 and 300g/m2.This new product can be applied in airplane to lighten weight; also it is raw material to be manufactured products in aviation, bullet-proof and sport equipment.

29

�

FIBE

RGlA

ss F

ABRI

C S-glASS FABRICIt’s woven by s-glass yarn and the thickness range is from 0.08 to 0.5mm. Weight per each square meter is 80g~520g. The available weaving methods are plain, twill and satin. This fabric has advantage of high strength. Attach specification sheet for reference.

FIBERglASS TEXTuRIzED FABRIC COATED BY gREY vERMICulITEIt uses fiberglass texturized fabric of 800g/m2 to coat with grey vermiculite on both sides. The finished product is 1400g/m2. And each roll is 1m x 50m. This product can stand temperature of 800°C so that can be used in the conditions of requiring of heat insulation, durable and defending.

FIBERglASS FABRIC COATED WITh ACRYlIC RESINBased on plain weaved fiberglass fabric or texturized fiberglass fabric, coating acrylic resin on both sides to improve close-grained, alkali-resistance, standing temperature 550°C, so it can be used in special condition.Area weight: 260g/m2, 480g/m2, 780g/m2, 1000g/m2

size: 1m (W)Color: blue, black, red and yellow and so on.

uNIDIRECTIONAl ARAMID FABRICIt is the fabric stitched of aramid fiber.GsM: 200g/m2, 280g/m2, 415g/m2

size: 1m (W)And we also can cut the width into 100mm or 200mm to supply.

30

�

FIBE

RGlA

ss W

OO

lAldebran


FIBERglASS WOOl PIPEIt uses glass wool in centrifugal ways to make various thickness pipes according to different outer diameter. It is a good and essential material for heat preservation in water and gas pipes. Kinds: pure pipes and glass pipe coated with alu.foil.length: 1mDensity: 48 kg/m3 or 64kg/m3

Thickness: 25mm or 50mmPacking: One 40’conatainer can load 163 cartons.Note: small pipes can inserted into big pipes so that it can save sea freight cost.

glASS WOOl MAChINEGlass Wool Machine

FIBERglASS WOOl BOARDSIt uses glass wool which adopts centrifugal way to produce boards and then finished by adding binder. It is good material for sounds- absorption and heat preservation.Density: 48kg/m3, 64kg/m3, 96kg/m3, 120kg/m3

size: 0.61m(W) x 1.22m(l) or 1.22m(W) x 2.44m(l)Thickness: 15mm, 25mm, 50mmNote: The boards can be coated with perforation Al. foil, black fiberglass tissue, black fabric, craft paper or PVC film on one side.

FIBERglASS WOOl

FIBERglASS WOOl MATIt uses glass wool which adopts centrifugal way to produce mat and then finished by adding binder. The mat can be combined with Al.foil, black tissue, black fiberglass fabric, craft paper or PVC film on single side. It is good material of sound- absorption and heat insulation.Specification:Density: 10kg/m3, 12kg/m3, 16kg/m3, 24kg/m3, 32kg/m3, 40kg/m3

size: 1.22m (W) x 10~30m (l)/rollThickness: 15mm, 25mm, 50mm, 100mmConductive coefficient (W/mk): ≤0.042Packing: Delivery in rolls form and one 40’ container can load 450 rolls.

31

�

FIBE

RGlA

ss W

OO

l

PREEINg SEAlINg PART OF glASS WOOlIt produces glass wool in centrifugal ways firstly and then makes mould to produce various sealing parts according to customer’s drawings and its density by pressed molding. The finished product can be plain glass wool or coat AL. foil on one side and black tissue on one side or black fiberglass fabric on another side.Density: 100kg/m3 or 120kg/m3.

lOADINg PICTuRE ABOuT glASS WOOl PIPEloading Picture about Glass Wool Pipe in Insert TypeAs per our experience, one 40’HQ container can load 163 cartons (1015mm x 750mm x 570mm). In each carton, we insert small pipe into big one to make full use of the space of container to save sea freight.Attach loading picture and the propositional loading table.

32

�

KEVl

AR P

ROD

uCT

sAldebran


KEvlAR FABRICWe can supply it for you. It uses Kevlar yarn and raw material using plain or twill weaved way to produce out. The width is 1m and length is 50m or 100m. usually, the gram weights are 62g/m2, 155g/m2, 180g/m2, 200g/m2, 255g/m2 and 300g/m2. This new product can be applied in airplane to lighten weight; also it is raw material to be manufactured products in aviation, bullet-proof and sport equipmen.

KEvlAR PRODuCTS

33

�

ROCK

WO

Ol

WATERPROOF ROCK WOOlWith treating waterproof agent during process rock wool, this kind of rock wool can float on the water when facing water. So the material can be used as sounds absorption and heat insulation in special waterproof environment.Density: 50kg/m3 ~ 200kg/m3

Thickness: 30 ~ 200mmWidth: 0.5m ~ 0.63mlength: 0.5m ~ 5m.

ROCK WOOl MAChINERock Wool Machine.

ROCK WOOl BOARDOur mineral wool takes local rocks (basalt rock and dolomite rock) as raw materials, and adopting the international advanced four-wheel centrifuge system for cotton technology. The annual output is 20,000 tons, 150 x 40’HQ can be made every day. We ever supplied for Germany-BAsF Company limited, America FluOR and Japan Mitsubishi PTA.The density of final products is from 40kg/m3 to 200kg/m3

Max width: 0.63mThickness: 50mm ~ 150mmlength: can be done as per customers’ requirements.

ROCK WOOl PIPEIt is made of rock wool and can stand temperature 600°C. It enhances the insulation effect of water or gas pipe and its price is lower than glass wool products.Density: 100kg/m3, 110kg/m3, 120kg/m3

The thickness can be supplied as per customers’ requirement. We can also calculate loading quantity for customers. We produce pure rock wool pipe and rock wool pipe coated with alu. Foil. And the cut has “——” shaped and “Z” shaped.

ROCK WOOl

34

�

ROCK

WO

Ol


hIgh STRENgTh ROCK WOOl BOARDThis rock wool is applicable for flat-topped roof building structure requiring high compressive strengthen due to their high-pressure and high-tensile performance. With the properties of thermal insulation, fire prevention, noise absorbing and others.standing temperature: 700°CDensity: 150kg/m3, 160kg/m3, 180kg/m3, 200kg/m3.

BlACK ROCK WOOlThis product can stand temperature ≥950°C and applied for occasions with requirements of fireproof performance of relatively higher level. In China, it is called black rock wool. This rock wool was added with 6% bauxite, 3% copper mine, 18% iron mine on the basic of general rock wool. We ever exported to Korea used in fireproof door.Density: 60kg/m3, 120kg/m3, 145kg/m3, 160kg/m3,180kg/m3.

Via Dalmine 10/A - 24035 Curno (BG) - P.IVA 02693840163tel. +39.035.611.942 fax. +39.035.43.77.161 www.aldebran.com [email protected]

Aldebraninnovative engineeringinnovative engineering

Engineering • translation • web design • software 3D • hardware • risk analysis • tech shop

Catalogo fibre composite en lowres

Documents

Transcript of Catalogo fibre composite en lowres