Catalog 2003

2003 Products CatalogBooks, Standards, Publications,Videotapes and CD-ROM

Promoting Coatings.Providing Knowledge.

Visual SSPC Painting Standards Shop Coating References Manuals Compilations Painting Inspection

Page 2 Pages 3-5 Pages 4-6 Page 6 Pages 6-7

Concrete Lead Paint Conference Education and CoatingsSurfaces Removal Proceedings Training TechnologyPage 8 0 Pages 10-11 Pages 12-13 Pages 14-15

Good Painting PracticeSSPC Painting Manual, Volume 1

Now completely revised andupdated--with new text, new photosand illustrations, new chapters, and

other new material not found inprevious editions! Available inHARDCOVER and on CD-ROM!

Page 3

SSPC-VIS 1Guide and Reference Photographsfor Steel Surfaces Prepared by Dry

Abrasive Blast Cleaning

The revised version of SSPC’s numberone visual reference features newphotos of previously painted blast

cleaned steel, and much, much more!

Page 2

Shop Painting of SteelA comprehensive report on

surface preparation and coatingpractices in today’s shop paintingfacilities--includes over a dozen

SSPC standards, guides andspecifications for shop primers,zinc-rich coatings, and more!

Page 6

The Fundamentals of Cleaningand Coating Concrete

SSPC’s popular concrete book isnow available on a multi-platformCD-ROM--with over 450 pages of

additional material not included inthe hardcover format! Buy both

together as a set and SAVE!

Page 8

Paint Film DegradationMechanisms and Control

By Clive H. Hare

Award-winning author Clive H. Harepresents a scientific approach to theanalysis and prevention of commonpaint and coating failures on steel,

concrete, and other surfaces.

Page 15

NEW! NEW! NEW! NEW!

NEW!

SSPC-VIS 2, Standard Method forEvaluating Degree of Rusting onPainted Steel SurfacesSSPC's popular rust standard featuresa series of 27 full color images and27 black and white diagrams representingvarious degrees of spot, general, andpinpoint rusting on painted steel surfaces.Text and tables provide a guide to the useof the reference photographs; a scale anddescription of SSPC standard rust grades;a comparison of SSPC, ASTM, ISO, andother rust grade scales; along with otheruseful information.Item #201-00-08SSPC Member Price: $190.57Non-Member Price: $272.25

SSPC and SSPC/NACE Surface PreparationVISUAL STANDARDS AND REFERENCE PHOTOGRAPHS

ISO 8501-1:1988/SS 05 59 00This international standard discusses thepreparation of steel surfaces for theacceptance of paints and coatings, andprovides a visual reference for theassessment of surfaces prior to and aftercleaning. Prepared by the InternationalOrganization for Standardization (ISO) incollaboration with the Swedish StandardsCommission (Standardisering-kommissioneni Sverige-SIS).Item #201-67-01Price: $371.25No member discount; not available as an SSPCOrganizational Member free publication selection

SSPC-VIS 1, Guide and ReferencePhotographs for Steel Surfaces Prepared byDry Abrasive Blast CleaningThe revised and expanded edition of SSPC's mostwidely used visual reference features full-colorphotos of previously coated and uncoated, rustedsteel surfaces before and after dry abrasive blastcleaning to white metal (SP 5/NACE 1), near-white(SP 10/NACE 2), commercial (SP 6/NACE 3), industrial(SP 14/NACE 8), and brush-off (SP 7/NACE 4) finishes.Appendix photographs show variations in white metalsurfaces caused by different metallic and non-metallicabrasives, and by differences in profile depth, angle ofview, and lightingItem #201-02-12SSPC Member Price: $190.57Non-Member Price: $272.25

SSPC-VIS 3, Visual Standard for Power- andHand-Tool Cleaned SteelShows 3 previously coated and 4 uncoated, rustedsteel surfaces before and after hand tool cleaning(SP 2); power tool cleaning (SP 3) with power wirebrushes, needle guns and sanding discs; and powertool cleaning to bare metal (SP 11). Additional photosdepict SP 11 surfaces with a restored anchor profile.Item #201-93-04SSPC Member Price: $190.57Non-Member Price: $272.25

SSPC-VIS 4/NACE VIS 7, Guide and ReferencePhotographs for Steel Surfaces Prepared byWaterjettingShows 4 previously coated and 3 uncoated, rustedsteel surfaces cleaned to WJ 1, WJ 2, WJ 3, and WJ 4finishes as defined by the SSPC/NACE standard for high-and ultrahigh-pressure waterjetting (SP 12/NACE 5).Additional photos illustrate degrees of light, moderate,and heavy flash rusting after waterjetting.Item #201-01-05SSPC Member Price: $190.57Non-Member Price: $272.25

SSPC-VIS 5/NACE VIS 9, Guide and ReferencePhotographs for Steel Surfaces Prepared byWet Abrasive Blast CleaningShows 2 uncoated, rusted steel surfaces before andafter wet abrasive blast cleaning to near-white(SP 10/NACE 2)) and commercial blast (SP 6/NACE 3)finishes. Additional photos illustrate the appearanceof flash rusting after cleaning. Photos of commercialand near-white surfaces achieved by dry abrasiveblast cleaning can be found in the new SSPC-VIS 1.Item #201-01-06SSPC Member Price: $132.82Non-Member Price: $189.75

Visual Standards and Reference Photographs

2

NEW!

Good Painting PracticeSSPC Painting Manual, Volume 1The new 4th edition of SSPC’s “Good PaintingPractice” has been reorganized and reformattedfor easier use, with new and revised text, newphotos and illustrations, new chapters, andother material not found in any previous edition.Now available in a 581-page hardcover, and on amulti-platform, hybrid CD-ROM for Macintosh® ,Windows®, and UNIX® operating systems.

HARDCOVER, Item #201-02-14SSPC Member Price: $202.12Non-Member Price: $288.75

CD-ROM, Item #201-CD07SSPC Member Price: $303.18Non-Member Price: $433.12

SSPC Painting Manual, Volume 1

3

• Introduction• Corrosion of Metals• Designing Steel Structures for Good

Painting Performance• Mechanisms of Corrosion Control by Coatings• Properties of Generic Coating Types• Organic Coatings: Composition and Film

Formation• Cathodic Protection of Coated Structures• Coating Galvanized Steel• Overview of Steel Surface Preparation• Hand and Power Tool Cleaning• Nonmetallic Abrasives• Metallic Abrasives• Abrasive Air Blast Cleaning• Centrifugal Blast Cleaning• Wet Abrasive Blast and Pressurized Water

Cleaning (Waterjetting)• The Effect of Soluble Salts on Protective

Coatings• Other Methods of Surface Preparation

-- Pickling-- Chemical Stripping-- Sodium Bicarbonate (Baking Soda)

Blast Cleaning-- Pliant Media Blasting-- Carbon Dioxide (Dry-Ice) Blasting-- Electrochemical Stripping

• Solvent and Chemical Pre-Cleaning• Dehumidification During Coating Operations• Concrete Surface Preparation• Surface Preparation of Nonferrous Surfaces• Coatings for Industrial Steel Structures• Coatings for Concrete

Here’s what you’ll find inside the new 4th edition of

GOOD PAINTING PRACTICE, SSPC Painting Manual, Volume 1

• Powder Coating• Thermal-Spray (Metallized) Coatings for Steel• Application of Industrial Coatings• Contractor Equipment: An Overview• Shop Painting of Steel• Painting Highway Bridges and Structures• Corrosion Protection of Water and Fuel Tanks• Linings for Vessels and Tanks• Painting Chemical Plants• Painting Waste Treatment Plants• Painting Petroleum Refineries• Painting Power Generation Facilities• Painting Steel Structures in Pulp and

Paper Mills• Painting Hydraulic Structures• Coatings for Buried and Immersed Metal

Pipelines• Painting Ships• Inspection• Safety and Health in the Protective

Coatings Industry• Air Quality Regulations• Waste Handling and Disposal• Other Regulations Affecting Protective

Coatings• Total Protective Coatings Programs• Comparative Painting Costs• Using Plant Surveys to Maintain Coating

Protection of Structures• Preparing a Specification for a Coating Project• Maintenance Painting Programs• Quality Control for Protective Coatings Projects• Coating Failures• Index

NEW!

SSPC’s Leading Bestsellers!Good Painting Practice, SSPC PaintingManual, Volume 1 is a comprehensiveoverview of modern procedures,equipment and materials for surfacepreparation and coating work onindustrial steel and concrete structures.Systems and Specifications, SSPCPainting Manual, Volume 2 (page 4), isa complete collection of SSPC standards,guides, specifications, and otherconsensus documents. Together theyform the essential works for anyoneconcerned with the safe and effectiveuse of protective coatings and linings!

Buy BOTH and SAVE!Purchase the HARDCOVER or CD-ROMversions of “Good Painting Practice”and “Systems and Specifications”together as a set for one special price!

SSPC Painting Manual, Two-VolumeHARDCOVER Set, Item #201-PMHCSSPC Member Price: $386.92Non-Member Price: $552.75

SSPC Painting Manual, Two-VolumeCD-ROM Set, Item #201-PMCDSSPC Member Price: $577.50Non-Member Price: $825.00

Four Convenient Ways toOrder!PHONE: Call 1-800-868-7495 (toll-free)

Monday through Friday, 8:00 AM to 4:30 PM,Eastern Standard Time.

FAX: Complete the Order formand send it to 1-866-399-3599 alongwith your credit information.Fax orders are accepted 24 hours aday, 7 days a week.

MAIL: Complete the Order formand return it to QPC along with yourcheck or credit information.

ONLINE! Fill out Order form, andclick on the “Submit” link,

Ordering is fast, convenient,and secure!

QUESTIONS? Contact the QPCInstruments Inc. Office at the phoneand fax numbers above, or by email [email protected]

http://www.qpcinstruments.com/contact.htm



HOW TO USE SSPC SPECIFICATIONS ANDGUIDES

SURFACE PREPARATION STANDARDS, GUIDES,AND SPECIFICATIONS

• SSPC-SP COMSurface Preparation Commentary for Steel and ConcreteSubstrates

• SSPC-SP 1Solvent Cleaning

• SSPC-SP 2Hand Tool Cleaning

• SSPC-SP 3Power Tool Cleaning

• SSPC-SP 5/NACE No. 1White Metal Blast Cleaning

• SSPC-SP 6/NACE No. 3Commercial Blast Cleaning

• SSPC-SP 7/NACE No. 4Brush-Off Blast Cleaning

• SSPC-SP 8Pickling

• SSPC-SP 10/NACE No. 2Near-White Blast Cleaning

• SSPC-SP 11Power Tool Cleaning to Bare Metal

• SSPC-SP 12/NACE No. 5*Surface Preparation and Cleaning of Steel and Other HardMaterials by High- and Ultrahigh-Pressure Water JettingPrior to Recoating

• SSPC-SP 13/NACE No. 6Surface Preparation of Concrete

• SSPC-SP 14/NACE No. 8Industrial Blast Cleaning

SSPC/NACE JOINT TECHNOLOGY REPORTS

• SSPC-TR 1/NACE 6G194Thermal Pre-Cleaning

• SSPC-TR 2/NACE 6G198Wet Abrasive Blast Cleaning

ABRASIVE SPECIFICATIONS

• SSPC-AB 1Mineral and Slag Abrasives

• SSPC-AB 2Cleanliness of Recycled Ferrous Metallic Abrasives

• SSPC-AB 3Newly Manufactured or Re-Manufactured Steel Abrasives

PAINTING AND COATING SYSTEMS GUIDESAND SPECIFICATIONS

• SSPC-PS COMCommentary on Painting Systems

• SSPC-PS Guide 1.00Guide to Selecting Oil Base Painting Systems

• SSPC-PS 1.09Three-Coat Oil Base Zinc Oxide Painting System(Without Lead or Chromate Pigment)

• SSPC-PS 1.10Four-Coat Oil Base Zinc Oxide Painting System(Without Lead or Chromate Pigment)

• SSPC-PS 1.12Three-Coat Oil Base Zinc Chromate Painting System

• SSPC-PS 1.13One-Coat Oil Base Slow Drying Maintenance Painting System(Without Lead or Chromate Pigments)

• SSPC-PS Guide 2.00Guide for Selecting Alkyd Painting Systems

• SSPC-PS Guide 3.00Guide for Selecting Phenolic Painting Systems

• SSPC-PS Guide 4.00Guide for Selecting Vinyl Painting Systems

• SSPC-PS 4.02Four-Coat Vinyl Painting System (For Fresh Water, Chemical,and Corrosive Atmospheres)

• SSPC-PS 4.04Four-Coat White or Colored Vinyl Painting System (For FreshWater, Chemical, and Corrosive Atmospheres)

• SSPC-PS Guide 7.00Guide for Selecting One-Coat Shop Painting Systems

• SSPC-PS Guide 8.00*Guide to Topcoating Zinc-Rich Primers

• SSPC-PS 9.01Cold-Applied Asphalt Mastic Painting System with Extra-Thick Film

• SSPC-PS 10.01Hot-Applied Coal Tar Enamel Painting System

• SSPC-PS 10.02Cold-Applied Coal Tar Mastic Painting System

• SSPC-PS 11.01Black (or Dark Red) Coal Tar Epoxy Polyamide Painting System

• SSPC-PS Guide 12.00*Guide to Zinc-Rich Coating Systems

• SSPC-PS 12.01*One-Coat Zinc-Rich Painting System

• SSPC-PS 13.01Epoxy Polyamide Painting System

• SSPC-PS 14.01Steel Joist Shop Painting System

• SSPC-PS Guide 15.00Guide for Selecting Chlorinated Rubber Painting Systems

• SSPC-PS 15.01Chlorinated Rubber Painting System for Salt Water Immersion

• SSPC-PS 15.02Chlorinated Rubber Painting System for Fresh Water Immersion

• SSPC-PS 15.03Chlorinated Rubber Painting System for Marine and IndustrialAtmospheres

• SSPC-PS 15.04Chlorinated Rubber Painting System for Field ApplicationOver a Shop-Applied Solvent Base Inorganic Zinc-Rich Primer

• SSPC-PS 16.01Silicone Alkyd Painting System for New Steel

• SSPC-PS Guide 17.00Guide for Selecting Urethane Painting Systems

• SSPC-PS 18.01Three-Coat Latex Painting System

• SSPC-PS Guide 19.00Guide for Selecting Painting Systems for Ship Bottoms

• SSPC-PS Guide 20.00Guide for Selecting Painting Systems for Boottoppings

• SSPC-PS Guide 21.00Guide for Selecting Painting Systems for Topsides

• SSPC-PS Guide 22.00Guide for Selecting One-Coat Preconstruction orPrefabrication Painting Systems

• SSPC-CS 23.00(I)Interim Specification for the Application of Thermal SprayCoatings (Metallizing) of Aluminum, Zinc, and Their Alloysand Composites for the Corrosion Protection of Steel

• SSPC-PS 24.00Latex Painting System for Industrial and Marine Atmospheres,Performance-Based

• SSPC-PS 26.00Aluminum Pigmented Epoxy Coating System MaterialsSpecification, Performance-Based

• SSPC-PS 27.00Alkyd Coating System Materials Specification,Performance-Based

PAINT AND COATING STANDARDS ANDSPECIFICATIONS

• SSPC-Paint COMCommentary on Paint Specifications

• SSPC-Paint 5Zinc Dust, Zinc Oxide and Phenolic Varnish Paint

• SSPC-Paint 8Aluminum Vinyl Paint

• SSPC-Paint 9White (or Colored) Vinyl Paint

• SSPC-Paint 11Red Iron Oxide, Zinc Chromate, Raw Linseed Oil and Alkyd Primer

• SSPC-Paint 12Cold-Applied Asphalt Mastic (Extra Thick Film)

• SSPC-Paint 15Steel Joist Shop Primer

• SSPC-Paint 16Coal Tar Epoxy-Polyamide Black (or Dark Red) Paint

4

Systems and SpecificationsSSPC Painting Manual, Volume 2The 8th edition of SSPC’s “Systems andSpecifications” offers a complete collection ofSSPC standards, guides, and specifications forsurface preparation, the selection andapplication of coating materials, and more.Available in a 785-page hardcover, and on amulti-platform, hybrid CD-ROM for Macintosh®,Windows®, and UNIX® operating systems.

HARDCOVER, Item #201-00-10SSPC Member Price: $231.00Non-Member Price: $330.00


Here’s what you’ll find inside the 8th edition of

SYSTEMS AND SPECIFICATIONS, SSPC Painting Manual, Volume 2

SSPC Painting Manual, Volume 2

Substantial savings on publication and videotape purchases are among the many benefits you’ll enjoy as an SSPC member!Join now and save on your order!

5

• SSPC-Paint 17Chlorinated Rubber Inhibitive Primer

• SSPC-Paint 18Chlorinated Rubber Intermediate Coat Paint

• SSPC-Paint 19Chlorinated Rubber Topcoat Paint

• SSPC-Paint 20*Zinc-Rich Primers (Type I, “Inorganic,” and Type II, “Organic”)

• SSPC-Paint 21White or Colored Silicone Alkyd Paint

• SSPC-Paint 22Epoxy Polyamide Paints (Primer, Intermediate, and Topcoat)

• SSPC-Paint 23Latex Primer for Steel Surfaces

• SSPC-Paint 24Latex Semigloss Exterior Topcoat

• SSPC-Paint 25Zinc Oxide, Alkyd, Linseed Oil Primer for Use OverHand Cleaned Steel

• SSPC-Paint 25BCSZinc Oxide, Alkyd, Linseed Oil Primer for Use OverBlast Cleaned Steel

• SSPC-Paint 26Slow Drying Linseed Oil Black Maintenance Primer(Without Lead or Chromate Pigments)

• SSPC-Paint 27Basic Zinc Chromate-Vinyl Butyral Wash Primer

• SSPC-Paint 28Water-Borne Epoxy Primer for Steel Surfaces

• SSPC-Paint 29*Zinc Dust Sacrificial Primer, Performance-Based

• SSPC-Paint 30*Weld-Through Inorganic Zinc Primer

• SSPC-Paint 31Single-Package Water-Borne Alkyd Primer, Performance-Based

• SSPC-Paint 32Coal Tar Emulsion Coating

• SSPC-Paint 33Coal Tar Mastic, Cold Applied

• SSPC-Paint 34Water-Borne Epoxy Topcoat for Steel Surfaces

• SSPC-Paint 35Medium Oil Alkyd Primer (Air Dry/Low Bake)

• SSPC-Paint 36*Two-Component Weatherable Aliphatic Polyurethane Topcoat,Performance-Based

• SSPC-Paint 101Aluminum Alkyd Paint

• SSPC-Paint 102Black Alkyd Paint

• SSPC-Paint 103Black Phenolic Paint

• SSPC-Paint 104White or Tinted Alkyd Paint

• SSPC-Paint 106Black Vinyl Paint

• SSPC-Paint 108High-Build Thixotropic Leafing Aluminum Paint

PAINT APPLICATION STANDARDS, GUIDES,AND SPECIFICATIONS

• SSPC-PA COMCommentary on Paint Application

• SSPC-PA 1Shop, Field, and Maintenance Painting of Steel

• SSPC-PA 2Measurement of Dry Coating Thickness with Magnetic Gages

• SSPC-PA Guide 3A Guide to Safety in Paint Application

• SSPC-PA Guide 4Guide to Maintenance Repainting with Oil Base or AlkydPainting Systems

• SSPC-PA Guide 5*Guide to Maintenance Painting Programs

QUALIFICATION PROCEDURES

• SSPC-QP COMCommentary on Qualification Procedures

• SSPC-QP 1Standard Procedure for Evaluating Painting Contractors(Field Application to Complex Industrial Structures)

• SSPC-QP 2Standard Procedure for Evaluating the Qualifications ofPainting Contractors (Field Removal of Hazardous Coatingsfrom Complex Structures)

• SSPC-QP 3Standard Procedure for Evaluating Qualifications ofShop Painting Applicators

• SSPC-QP 4Standard Procedure for Evaluating the Qualifications ofContractors Disturbing Hazardous Coatings DuringDemolition and Repair Work

• SSPC-QP 5Standard Procedure for Evaluating Qualifications ofCoating and Lining Inspection Companies

TECHNOLOGY GUIDES

• SSPC-Guide 6Guide for Containing Debris Generated During PaintRemoval Operations

• SSPC-Guide 7Guide for the Disposal of Lead-Contaminated SurfacePreparation Debris

• SSPC-Guide 9Guide for Atmospheric Testing of Coatings in the Field

• SSPC-Guide 10Guide to Specifying Coatings Conforming to Volatile OrganicCompound (VOC) Content Requirements

• SSPC-Guide 11Guide for Coating Concrete

• SSPC-Guide 12Guide for Illumination of Industrial Painting Projects

• SSPC-Guide 13Guide for the Identification and Use of Industrial CoatingMaterial in Computerized Product Databases

• SSPC-Guide 14Guide for the Repair of Imperfections in Galvanized orInorganic Zinc Coated Steel Using Organic Zinc-Rich Coating

TECHNOLOGY UPDATES

• SSPC-TU 1Surface Tolerant Coatings for Steel

• SSPC-TU 2Design, Installation, and Maintenance of Coating Systemsfor Concrete Used in Secondary Containment

• SSPC-TU 3Overcoating

• SSPC-TU 4Field Methods for Retrieval and Analysis of Soluble Saltson Substrates

• SSPC-TU 5Accelerated Testing of Industrial Protective Coatings

• SSPC-TU 6Chemical Stripping of Organic Coatings from Steel Structures

• SSPC-TU 7Conducting Ambient Air, Soil, and Water SamplingDuring Surface Preparation and Paint DisturbanceActivities

TEST PANEL PREPARATION METHOD

• SSPC-ME 1Uncontaminated Rusted Steel

SUPPLEMENTS TO THE 8TH EDITION

• SSPC-PA Guide 5*Guide to Maintenance Coating of Steel Structures inAtmospheric Service

• SSPC-PA 6/NACE No. 10Fiberglass-Reinforced Plastic (FRP) Linings Applied toBottoms of Carbon Steel Aboveground Storage Tanks

• SSPC-PA 7Applying Thin Film Coatings to Concrete

• SSPC-Paint 20*Zinc-Rich Coating, Type I-Inorganic and Type II-Organic

• SSPC-Paint 29*Zinc Dust Sacrificial Primer, Performance-Based

• SSPC-Paint 30*Weld-Through Inorganic Zinc Primer

• SSPC-Paint 36*Two-Component Weatherable Aliphatic Polyurethane Topcoat,Performance-Based

• SSPC-Paint 37Waterborne Epoxy Coating for Cementitious Substrates,Performance-Based

• SSPC-PS Guide 8.00*Guide to Topcoating Zinc-Rich Primers

• SSPC-PS Guide 12.00*Guide to Zinc-Rich Coating Systems

• SSPC-PS 12.01*One Coat Zinc-Rich Painting System

• SSPC-SP 12/NACE No. 5*Surface Preparation and Cleaning of Metals by WaterjettingPrior to Recoating

• SSPC-SP 15Commercial Grade Power Tool Cleaning

• SSPC-TR 3/NACE 6A192Dehumidification and Temperature Control During SurfacePreparation, Application, and Curing for Coatings/Linings ofSteel Tanks, Vessels, and Other Enclosed Spaces

• SSPC-TR 4/NACE 80200Preparation of Protective Coating Specifications forAtmospheric Service

• SSPC-TU 8The Use of Isocyanate-Containing Paints as IndustrialMaintenance Coatings

• SSPC-TU 9Estimating Costs for Protective Coatings Projects

• SSPC-TU 10Procedures for Applying Thick Film Coatings and SurfacingsOver Concrete Floors

* PLEASE NOTE: All recently revised standards are marked withan asterisk (*); the versions provided as supplements are the mostrecent, and replace the versions contained in the book and CD-ROM.All other supplements are completely new documents not foundin any previous edition.

Surface Preparation SpecificationsFeatures the entire collection of SSPC/NACEjoint abrasive blast cleaning specifications(SP 5/NACE 1, SP 6/NACE 3, SP 7/NACE 4,SP 10/NACE 2, SP 14/NACE 8). Also includesthe SSPC Surface Preparation Commentary(SP COM); the SSPC specifications for abrasives(AB1, AB 2, AB 3), hand-tool cleaning (SP 2),and power-tool cleaning (SP 3, SP 11); thejoint SSPC/NACE technical reports on thermalpre-cleaning (TR 1/NACE 6G194) and wetabrasive blast cleaning (TR 2/NACE 6G198);and the SSPC technology update on chemicalstripping (TU 6). The new SSPC standard forcommercial grade power tool cleaning (SP 15)is provided as supplement.Item #201-00-11SSPC Member Price: $115.50Non-Member Price: $165.00

Surface Preparation and Coatingof ConcreteContains the SSPC guide to coating concrete(Guide 11); the joint SSPC/NACE documentsfor the surface preparation of concrete(SP 13/NACE 6) and coating systems forconcrete used in secondary containment(TU 2/NACE 6G197), plus additional referencestandards (SP 1, PA 1, PA Guide 3). Supplementsinclude the new SSPC standard for applyingthin film coating to concrete (PA 7), the newSSPC technology update on applying thickfilm coatings and surfacings to concretefloors (TU 10), and the new performancespecification for waterborne epoxy coatingsfor concrete (Paint 37).Item #201-02-11SSPC Member Price: $77.96Non-Member Price: $111.37

Shop Painting of SteelThis 154-page report identifies various typesof shop painting facilities, describes theirmethods of operation, and compares theadvantages and limitations of shop paintingversus painting in the field. Provides adetailed overview of environmental controlsystems, surface preparation, materialshandling, coating application, commonly usedprimers and coating systems, inspection,environmental and safety practices,certification programs, and related topics.Includes a glossary of nearly 100 terms, andover a dozen recently revised SSPC standardsfor shop primers, zinc-rich coatings, and more.Item #201-02-01SSPC Member Price: $109.72Non-Member Price: $156.75

Protective Coating Inspection Standardsfor Field and Shop ApplicationsA collection of 34 widely-used ASTM standardsfor the inspection of field- and shop-appliedcoatings. Includes methods for testing dryfilm thickness, adhesion, surface preparation,and more. Published by ASTM International.Item #201-02-18SSPC Member Price: $69.30Non-Member Price: $99.00Not available as an SSPC OrganizationalMember free publication selection

Standards Compilations

6

Paint Application SpecificationsIncludes the SSPC standards for shop, field,and maintenance painting (PA 1) and themeasurement of dry coating thickness (PA 2),plus the SSPC guides to safety in paintapplication (PA Guide 3) and maintenancerepainting with oil base or alkyd paintingsystems (PA Guide 4). The revised guide tomaintenance coating programs (PA Guide 5),the new SSPC/NACE standard for applyingfiberglass-reinforced plastic linings (PA 6/NACE 10), and the new SSPC standard forapplying thin film coating to concrete (PA 7),are provided as supplements.Item #201-00-12SSPC Member Price: $92.40Non-Member Price: $132.00

Qualification ProceduresIncludes the SSPC standards for evaluatingthe qualifications of painting contractors forfield application of coatings (QP 1) and theremoval of hazardous coatings (QP 2); plusthe standards for evaluating shop paintingcontractors (QP 3), contractors disturbinghazardous paint during demolition andrepair work (QP 4), and coating and lininginspection companies (QP 5).Item #201-00-13SSPC Member Price: $77.96Non-Member Price: $111.37

Guides on Environmental ProtectionContains the SSPC guides for containingdebris generated during paint removaloperations (Guide 6), the disposal of lead-contaminated surface preparation debris(Guide 7), and more.Item #201-98-04SSPC Member Price: $46.20Non-Member Price: $66.00

NEW!

Compilations of SSPC Standards, Guides, and Specificationsfrom SYSTEMS AND SPECIFICATIONS, SSPC Painting Manual, Volume 2

NEW!

NEW!

Inspection

7

Introduction to the Handbook

Inspection Personnel

Reviewing and Preparing InspectionDocuments

• Appendix—Inspection Forms

Basic Inspection Practice• Introduction• Preliminary Inspection Responsibilities• Inspection of Surface Preparation

of Steel• Inspection of Surface Preparation

of Concrete• Inspection of Mixing, Thinning, and

Coating Application• Post-Application Inspection• Appendix—Concrete Surfaces

Inspection of Specific Coating Materials

• Introduction• Conventional Coatings• Chemical-Resistant Brick and Tile Linings• Coal Tar Coatings• Thick Film Elastomeric Polyurethanes• Fiberglass-Reinforced Plastic (FRP) Linings• Fluoroelastomeric Coatings• High-Bake Phenolic and Epoxy Phenolic

Coatings• Powder Coatings• Natural and Synthetic Rubber Linings• Shotcrete• Tapes• Thermal Spray Metallic Coatings for Steel• Thermoplastic Sheet Linings• Inorganic Zinc-Rich Coatings

Here’s what you’ll find insideTHE INSPECTION OF COATINGS AND LININGS

Inspection of Facilities

• Introduction• Storage Tanks• Pipelines

• Underwater Inspection• Bridges• Ship Hulls• Locks, Dams, Spillways, and Their

Appurtenances

• Offshore Facilities• Refineries and Petrochemical Plants• Food and Beverage Processing

Plants• Water and Wastewater Treatment

Plants• Pulp and Paper Mills• Nuclear Power Plants• Fossil Fuel Power Plants

Safety• Appendix—Monitoring Equipment

Field Test Methods and Instruments Used byCoatings Inspectors

Appendixes• Abbreviations and Acronyms• Glossary• Standards Referenced• Regulations Referenced• Directory of Standards-Issuing

Organizations and Regulatory Agencies• Inspection Equipment• Directory of Inspection Equipment

Suppliers• Bibliography

Coating and Lining Inspection ManualThis small, but useful book offers a solid reviewof basic inspection practices in a concise"question-and-answer" format. Suitable as botha learning tool for beginners and as a portablefield reference for the more experienced inspector.Item #201-91-12SSPC Member Price: $115.50Non-Member Price: $165.00

Visual Comparison ManualApplication and Coating DefectsA visual glossary of common applicationdefects and coating failures on steel and othersubstrates found in industrial, commercial, andmarine environments. The CD-ROM containsmaterial found in the book, plus additionalphotos, an interactive glossary, a guide tomarine fouling organisms, and more.Buy BOTH together as a set and SAVE!

Visual Comparison Manual BOOK*Item #201-99-01SSPC Member Price: $155.92Non-Member Price: $222.75

Visual Comparison Manual CD-ROM*Item #201-CD03SSPC Member Price: $346.50Non-Member Price: $495.00

Visual Comparison Manual SET*Item #201-VCM-SETSSPC Member Price: $444.67Non-Member Price: $635.25

* Not available as an SSPC OrganizationalMember free publication selection

The Inspection of Coatings and LiningsA Handbook of Basic Practice for Inspectors,Owners, and SpecifiersA detailed, comprehensive guide to the procedures,standards, and equipment used to inspect surfacepreparation, coating application, and associatedwork on industrial steel and concrete structures.Discusses the role and qualifications of inspectionpersonnel; the preparation and review of inspectiondocuments; basic inspection practice; the inspectionof specific coating and lining materials; the uniqueinspection requirements of various facilities andstructures; safety regulations and practices; fieldtest methods and instruments used by coatinginspectors; and much more.Item #201-97-07SSPC Member Price: $202.12Non-Member Price: $288.75

Concrete Surfaces

8

Material found in the HARDCOVER and onthe CD-ROM:• Concrete Composition and Durability• Common Mechanisms of Concrete

Deterioration• Placing, Finishing, and Curing Concrete• Concrete Surface Preparation: Treating

Surface Irregularities, Cleaning, and Profiling• Overview of Industry Guidance on Concrete

Condition Assessment and Repair for UsePrior to Coating

• Treating Concrete Joints and Cracks for Coating• Coating Materials: Sealers• Coating Selection and Important Properties

of Coatings for Concrete• Coating Materials: Linings for Primary

Containment• Coating Materials: Linings for Secondary

Containment• Specialty Coating Materials for Protecting

Reinforcing Steel in Concrete• Coating Application Methods and Equipment• Inspection• Operations Safety• Preparing a Specification for Concrete

Coating Work• Failure of Coatings on Concrete• Glossary• Index

Here’s what you’ll find insideTHE FUNDAMENTALS OF CLEANING AND COATING CONCRETE

The Fundamentals of Cleaning andCoating Concrete HARDCOVERThis 379-page hardcover presents a thoroughexamination of concrete's physical and chemicalproperties; the causes and prevention of concretedeterioration; surface cleaning, repair, andpreparation methods; the selection andapplication of protective coating and liningsystems; inspection; failure analysis; and more.Item #201-01-10SSPC Member Price: $173.25Non-Member Price: $247.50

The Fundamentals of Cleaning andCoating Concrete CD-ROMThis new multi-platform CD-ROM contains all ofthe material found in the hardcover edition, plusover 450 pages of additional reference material.Includes select SSPC standards for cleaning andcoating concrete, excerpts from SSPC conferenceproceedings and other publications, and more!Item #201-CD08SSPC Member Price: $259.87Non-Member Price: $371.25Counts as two (2) SSPC Organizational Memberfree publication selections

NEW!

Buy BOTH and SAVE!Purchase the HARDCOVER and CD-ROMversions together as a set for one low price!Item #201-CON-SETSSPC Member Price: $389.81Non-Member Price: $556.87Counts as three (3) SSPC Organizational Memberfree publication selections

Material found only on the CD-ROM:

• Cleaning and Coating Concrete: ABibliography

• The complete text of SSPC concretestandards, guides, and specifications-- SSPC Guide 11, Guide for Coating Concrete-- SSPC PA 7, Applying Thin Film Coatings

to Concrete-- SSPC TU 2/NACE 6G197, Design,

Installation, and Maintenance of CoatingSystems for Concrete Used in SecondaryContainment

-- SSPC SP 13/NACE 6, Surface Preparationof Concrete

-- SSPC TU 10, Procedures for ApplyingThick Film Coatings and SurfacingsOver Concrete Floors (Draft)

• Key papers from recent SSPC conferenceproceedings

• Excerpts from select SSPC reference booksand technical publications

• Relevant material from SSPC TrainingCourse C-1: Fundamentals of ProtectiveCoatings for Industrial Structures

• “Applicator Training Bulletins” onconcrete from the Journal of ProtectiveCoatings and Linings (JPCL)

• The Naval Facilities Engineering ServiceCenter Publication on Concrete FloorCondition Assessment

ICRI/ACI Concrete Repair Manual*This extensive collection of standards andother technical documents from ACI, ICRI,SSPC and other organizations reflects thestate of the art and practice in the investigation,evaluation, repair, rehabilitation, maintenance,and protection of concrete. Published by theInternational Concrete Repair Institute andACI (American Concrete Institute) International.Item #201-00-17SSPC Member Price: $222.33Non-Member Price: $317.62


ICRI Technical Guideline No. 03732*Selecting and Specifying Concrete SurfacePreparation for Coatings, Sealers, andPolymer OverlaysThis comparator and document set provides auseful guide and visual reference for selectingan appropriate method of concrete surfacepreparation, and achieving a desired profilefor the acceptance of coatings, linings, andother protective systems.Item #201-97-13SSPC Member Price: $171.51Non-Member Price: $245.02

Special Focus onSURFACE PROFILE

Surface Texture (Profile) MeasurementThis early report prepared for the NationalShipbuilding Research Program (NSRP)surveys, identifies, and evaluates variouslaboratory and field techniques for surfaceprofile measurement.Item #201-82-04SSPC Member Price: $34.65Non-Member Price: $49.50

Surface Profile for Anti-Corrosion PaintsThis early report prepared for the NationalShipbuilding Research Program (NSRP)investigates the mechanisms of surfaceprofile formation, the effect of abrasive blastcleaning conditions on surface profile , andthe subsequent effect of surface profile oncoating performance.Item #201-74-01SSPC Member Price: $40.42Non-Member Price: $57.75

Surface Profile ComparatorAn instrument designed for the visualestimation of the surface profile (texture) ofabrasive blast cleaned steel. Includes anilluminated, hand-held magnifier and threemetal discs replicating surfaces cleaned withvarious grades of grit, sand, and shot.

Magnifier and Three Discs*Catalog #201-70-05Price: $453.75No member discount

Magnifier*Catalog #201-70-04Price: $41.25No member discount

Grit Blast Disc*Catalog #201-70-03Price: $156.75No member discount

Sand Blast Disc*Catalog #201-70-02Price: $156.75No member discount

Shot Blast Disc*Catalog #201-70-01Price: $156.75No member discount

Effect of Surface Contaminantson Coating LifeExamines the issue of soluble salt contaminationon steel structures, its effect on coatingperformance, and the influence of blast cleaningabrasives on the transfer of soluble salts.Item #201-91-07SSPC Member Price: $40.42Non-Member Price: $57.75

Maintenance Coating ofWeathering SteelInterim ReportPresents laboratory evaluations of materialsand techniques for cleaning and paintingchloride-contaminated weathering steelbridges, and offers preliminary guidelines forselecting maintenance options.Item #201-91-04SSPC Member Price: $40.42Non-Member Price: $57.75

Maintenance Coating ofWeathering SteelField Evaluations and GuidelinesCompares data from a 4-year field study ofmaintenance coatings for weathering steel topreliminary laboratory evaluations, andoffers guidelines for the selection of surfacepreparation methods and coating materials.Item #201-92-08SSPC Member Price: $40.42Non-Member Price: $57.75

Maintenance Coating ofWeathering SteelTwo-Volume SetPurchase the “Maintenance Coating ofWeathering Steel: Interim Report” and “FieldEvaluations and Guidelines” together as a setfor one special price!Item #201-92-09SSPC Member Price: $63.52Non-Member Price: $90.75

Special Focus Publications

9


Special Focus on

BRIDGE AND HIGHWAY STRUCTURES

Procedure HandbookSurface Preparation and Painting of Tanksand Closed AreasA detailed, practical guide to the preparationand coating of steel tank interiors and confinedspaces aboard ships and other marine vessels.Includes descriptions of various technologies,materials, and equipment, in addition to step-by-step procedures and project examples.Item #201-00-09SSPC Member Price: $92.40Non-Member Price: $132.00

Surface Preparation and CoatingsHandbookProvides information and guidance on themaintenance of marine vessels with protectivecoatings. Topics include surface preparation,coating materials, application methods,housekeeping, safety and fire prevention,environmental issues, and more.Item #201-95-07SSPC Member Price: $69.30Non-Member Price: $99.00

Performance Testing of Marine CoatingsCompares the relative merits of various testmethods for predicting the performance ofcoatings exposed to marine environments.Item #201-90-02SSPC Member Price: $40.42Non-Member Price: $57.75

Evaluation of the Effectiveness ofWet Blast Cleaning Methods onSurface PreparationAn early look at the advantages, limitations,and recommended uses of wet blast cleaning.Presents a review of equipment, technologies,and procedures; information gathered fromfield demonstrations; and more.Item #201-86-02SSPC Member Price: $40.42Non-Member Price: $57.75

Special Focus on

SHIPS AND MARINE VESSELS

Guidelines for Cost-Effective LeadPaint RemovalPresents the results of an FHWA sponsoredworkshop conducted to identify criticaltechnological and regulatory issues, and todevelop recommendations for the cost-effective removal of lead paint from steelhighway bridges.Item #201-96-06SSPC Member Price: $46.20Non-Member Price: $66.00

Lead and Other Safety, Health, andEnvironmental Issues: Piecing Togetherthe Critical IssuesA broad range of regulatory issues andcompliance strategies are discussed in theproceedings of the SSPC Compliance inIndustrial Painting Conference, held inStamford, Connecticut, March 3-4, 1997.Item #201-97-03SSPC Member Price: $46.20Non-Member Price: $66.00

Industrial Lead Paint Abatement:Preparing for the FutureThe Proceedings of the 9th Annual SSPCIndustrial Lead Paint Abatement and RemovalConference, Pittsburgh, Pennsylvania, 1996.Topics include alternative surface preparationmethods; waste management; and more.Item #201-96-01SSPC Member Price: $46.20Non-Member Price: $66.00

Industrial Lead Paint Abatement:Maintenance Strategies for CorporateFacilities and StructuresThe Proceedings of the 8th Annual SSPCIndustrial Lead Paint Abatement and RemovalConference, Chicago, Illinois, 1995. Topicsinclude monitoring lead exposures; legal,insurance, and contractual issues; and more.Item #201-95-05SSPC Member Price: $46.20Non-Member Price: $66.00

Industrial Lead Paint Abatement:Practical Techniques for Complyingwith RegulationsThe Proceedings of the 7th Annual SSPCIndustrial Lead Paint Abatement and RemovalConference, Greenwich, Connecticut, 1994.Topics include techniques for removal andcontainment; environmental monitoring;owner/contractor perspectives; and more.Item #201-94-02SSPC Member Price: $46.20Non-Member Price: $66.00

Industrial Lead Paint Abatement:Approaches, Alternatives, and AdvancesThe Proceedings of the 6th Annual SSPCIndustrial Lead Paint Abatement and RemovalConference, Cincinnati, Ohio, 1993. Topicsinclude liability and awareness issues;abatement costs and alternatives; wastehandling; worker safety; and more.Item #201-93-01SSPC Member Price: $46.20Non-Member Price: $66.00

Lead-Based Paint Removal for SteelHighway BridgesPresents a review of removal and containmenttechnologies, waste handling practices, leadpaint removal specifications, and contractdevelopment. Features a survey of bridgepainting costs, comparisons of full removalvs overcoating, and other useful information.Item #201-97-15SSPC Member Price: $46.20Non-Member Price: $66.00

Industrial Lead Paint Removal HandbookAn essential guide and reference for everyone whomanages or conducts industrial lead paint removaloperations. Discusses coating removal methods,the design and construction of containment systems,the handling and disposal of debris, requirements forprotecting workers and the environment, verifyingcompliance with regulations, specifying and managinglead paint removal projects, and other functions.Appendices include excerpts from the Code ofFederal Regulations, a glossary of terms, and more.Item #201-93-02Price: $206.25No member discount; not available as an SSPCOrganizational Member free publication selection

Lead Paint Removal

10

SSPC Lead Paint RemovalCONFERENCE PROCEEDINGS

Lead Paint Removal forBRIDGE AND HIGHWAY STRUCTURES

Project DesignIndustrial Lead Paint Removal Handbook, Volume 2Provides a logical, multi-phase approach to thedesign, implementation, and execution of lead paintremoval projects. Discusses methods for identifyingthe presence of lead, risk assessment, the selectionof coating removal/containment system combinations,environmental monitoring, worker protection, wastemanagement, project clearance, the preparation ofproject specifications and cost estimates, and more.Item #201-95-06Price: $140.25No member discount; not available as an SSPCOrganizational Member free publication selection

SSPC’s Bestselling Lead Paint Removal TitlesINDUSTRIAL LEAD PAINT REMOVAL HANDBOOK, Two-Volume Set

Buy BOTH and SAVE!Industrial Lead Paint Removal Handbook, Two-Volume SetPurchase the “Industrial Lead Paint Removal Handbook” and “Project Design: IndustrialLead Paint Removal Handbook, Volume 2” together as a set and save $35.00 off theircombined individual prices!Item #201-94-20Price: $288.75No member discount; not available as an SSPCOrganizational Member free publication selection

Protective Coatings for Pulp and PaperMills, 3rd Annual SeminarProceedings of the 3rd Annual SSPC Pulp andPaper Industry Seminar, Tacoma, Washington,July 9-11, 1990. Topics include corrosionprotection for new construction, coatings forwet ends of paper machines, and more.Item #201-90-06SSPC Member Price: $28.87Non-Member Price: $41.25

Protective Coatings for Pulp and PaperMills, 2nd Annual SeminarProceedings of the 2nd Annual SSPC Pulp andPaper Industry Seminar, Minneapolis, Minnesota,July 27-28, 1989. Topics include protectivecoating programs for paper mills, assessmentsof various coating materials, and more.Item #201-89-15SSPC Member Price: $28.87Non-Member Price: $41.25

Protective Coatings for Pulp and PaperMills, 1st Annual SeminarProceedings of the 1st Annual SSPC Pulp andPaper Industry Seminar, New Orleans,Louisiana, July 28-29, 1988. Topics include theassessment of concrete deterioration, detectingand removing contaminants, and more.Item #201-88-04SSPC Member Price: $28.87Non-Member Price: $41.25

Protective Coatings for Pulp and PaperMills, Three-Volume SetThis complete set of proceedings from allthree SSPC Pulp and Paper Industry Seminarspresents a wide range of experiences andperspectives.Item #201-90-11SSPC Member Price: $69.30Non-Member Price: $99.00

SSPC Conference Proceedings

11

Special Focus onPULP AND PAPER MILLS

The Proceedings of the AnnualSSPC INTERNATIONAL CONFERENCE AND EXHIBITION

SSPC 2002 Technical PresentationsContains papers presented during thetechnical program of the SSPC 2002International Conference and Exhibition,Tampa, Florida, November 3-6, 2002. Topicsinclude recent advances in waterjettingtechnologies, the use of dehumidificationsystems, the effect of surface contaminantson coating life, successful anti-slip coatingsystems, marine coating applications,performance testing of anti-corrosivecoatings, the development of maintenancecoating programs, and more.

SOFTCOVER, Item #201-02-16SSPC Member Price: $86.62Non-Member Price: $123.75


SSPC 2001: The Proceedings of theTechnical PresentationsThe Proceedings of the SSPC 2001 TechnicalPresentations, Atlanta, Georgia, November11-14, 2001. Topics include high productionwaterjetting and other surface preparationtechniques; recent developments in polyureaand thermal spray coatings; specifying andtesting tensile adhesion; engineering controlsfor blast cleaning operations; the selection,operation, and maintenance of dust collectors;business development strategies; and more.



SSPC 2000: The Proceedings of theSeminarsThe Proceedings of the SSPC 2000 Seminars,Nashville, Tennessee, November 12-16, 2000.Topics include coatings for concrete surfaces;avoiding contract disputes; maintaining marineand offshore facilities; selecting and applying100% solids; the roles and responsibilities ofcoating project participants; emerging surfacepreparation technologies; and more.



NEW!

SSPC 99: The Proceedings of theSeminarsThe Proceedings of the SSPC '99 Seminars,Houston, Texas, November 14-18, 1999.Item #201-99-14SSPC Member Price: $57.75Non-Member Price: $82.50

Increasing the Value of CoatingsThe Proceedings of the SSPC ‘98 Seminars,Orlando, Florida, November 15-19, 1998.Item #201-98-11SSPC Member Price: $57.75Non-Member Price: $82.50

Expanding Coatings KnowledgeWorldwideThe Proceedings of the SSPC ‘97 Seminars,San Diego, California, November 16-20, 1997.Item #201-97-09SSPC Member Price: $57.75Non-Member Price: $82.50

Technologies for a Diverse IndustryThe Proceedings of the SSPC ‘96 Seminars,Charlotte, North Carolina, November 17-21, 1996.Item #201-96-08SSPC Member Price: $40.42Non-Member Price: $57.75

Balancing Economics and Compliancefor Maintaining Protective CoatingsThe Proceedings of the SSPC ‘95 Seminars,Dallas, Texas, November 9-16, 1995.Item #201-95-09SSPC Member Price: $40.42Non-Member Price: $57.75

Managing Costs and Risks for Effectiveand Durable ProtectionThe Proceedings of the SSPC ‘94 Seminars,Atlanta, Georgia, November 11 17, 1994.Item #201-94-19SSPC Member Price: $40.42Non-Member Price: $57.75

Innovations for Preserving andProtecting Industrial StructuresThe Proceedings of the SSPC '93 Seminars,New Orleans, Louisiana, November 13-18, 1993.Item #201-93-06SSPC Member Price: $40.42Non-Member Price: $57.75

Fall ProtectionA Training Program for EmployeesIncludes a 24-minute VHS training video,a program overview, a copy of OSHA’sstandard for fall protection, 10 instructorguides and 10 employee handbooks (one foreach key program topic), employee quizbooks, an employee awareness poster,a training log, overheads, and 10 employeewallet cards. Discusses the properassembly, use, and maintenance ofguardrails, safety nets, fall arrest andpositioning devices, warning lines, and otherfall protection systems; controlled accesszones, safety monitoring systems, covers forholes and voids, protection from fallingobjects, fall protection plans, and more.Item #201-100-KSSPC Member Price: $408.37Non-Member Price: $453.75Not available as an SSPC OrganizationalMember free publication selection

Scaffolding Training ProgramIncludes an 18-minute VHS training video,an instructor guide, a copy of OSHA's safetystandard for scaffolds, 10 employeehandbooks, an employee awareness poster,a training log, and 10 employee wallet cards.Discusses the importance of scaffoldaccess, guidelines for safe use, structuralstability, protection from falls and fallingobjects, load requirements and limitations,and other relevant topics.Item #201-106-KSSPC Member Price: $259.87Non-Member Price: $288.75Not available as an SSPC OrganizationalMember free publication selection

Protective Coatings GlossaryTerms from Coating of Industrial Steeland Concrete Structures, Failure Analysis,and RegulationsProvides simple definitions for over 1,500 terms andacronyms associated with surface preparation, paint andcoating materials, application, inspection, failure analysis,coatings end-uses, regulations, and more. Your guide tothe language of the protective coatings industry!Item #201-00-07SSPC Member Price: $75.07Non-Member Price: $107.25

12

Education and Training

These programs from J. J. Keller and Associates are specifically designed to help employersmeet the safety and training requirements of certain OSHA standards, and to help workersrecognize and avoid potential hazards. Both programs feature a VHS training video, instructorguides, worker handbooks, and other useful materials in one convenient and affordable package.

The Value of CoatingsThis 9-1/ 2 minute videotape program highlightsthe potential long-term economic benefitsoffered by protective coatings and linings.Unlike other SSPC videos, which are designedto train and educate blasters, painters, andother coatings professionals, "The Value ofCoatings" is aimed at financial decision-makersand others responsible for planning andbudgeting maintenance coating operations.Item #201-VT-VOCSSPC Member Price: $24.75Non-Member Price: $33.00Free to qualified members; contact the SSPCPublication Sales Office for details

Videotape Training on Protective CoatingsThis 4-unit series uses a combination of live-actiondemonstrations, still photography, text, graphics,and voice-over narration to explain the basicmaterials, methods, and equipment used for thesurface preparation and coating of structural steel.Rentals include a free copy of an accompanyingcourse outline; purchases include 10 free copies.To request the loan of a free preview videotape,contact the SSPC Publications Sales Office byphone (1-412-281-2331), fax (1-412-281-9992) oremail ([email protected]).

UNIT AND TITLE RENTAL PURCHASE

Unit 1, Surface PreparationItem #201-85-08 $165.00 ....... $453.75

Unit 2, Coatings TechnologyItem #201-85-09 $165.00 ....... $453.75

Unit 3, Application of CoatingsItem #201-85-10 $165.00 ....... $453.75

Unit 4, Quality ControlItem #201-85-11 $165.00 ....... $453.75

Complete 4-Unit SeriesItem #201-85-12 $495.00 ....... $1608.75

PLEASE NOTE: Unless otherwise noted, SSPC membersreceive a 10% discount on videotape purchases; there areno member discounts on rentals. Rental period (if available)is 14 business days. No rentals outside the USA and Canada.Once paid, rental fees can be applied toward the final costof purchase. Videotapes are not available as SSPCOrganizational Member free publication selections. Playingtime for each videotape is approximately 30-40 minutes,unless stated otherwise. Prices shown are for standard VHSformat; add an additional $82.50 reproduction fee pervideotape for PAL format.

Safety Training onFALL PROTECTION AND SCAFFOLDING

Videotape Training on ProtectiveCoating Application and InspectionThis 9-unit series employs the use of stillphotography, text, graphics, and voice-overnarration to discuss the standards, techniques,and equipment used to inspect materials,equipment, workmanship, and more. Primarilydesigned for inspectors, specifiers, managers,and others responsible for the quality ofapplied coatings and linings. No rental orpreview available.

UNIT AND TITLE

Unit 1, Introduction and BasicsItem #201-BT01

Unit 2, Specifications, Procedures, andQuality AssuranceItem #201-BT02

Unit 3, Surface Preparation Standards andMethodsItem #201-BT03

Unit 4, Surface Preparation Equipment andInspectionItem #201-BT04Unit 5, Coating and Lining Materials andMethodsItem #201-BT05Unit 6, Coating and Lining Application andInspection EquipmentItem #201-BT06

Unit 7, Coating and Lining Inspection andRepair MethodsItem #201-BT07

Unit 8, Coatings and Surface Preparation forConcreteItem #201-BT08

Unit 9, Concrete SurfacersItem #201-BT09

Complete 9-Unit SeriesItem #201-BT10

Price ScheduleAny 1 Unit ....................................................$412.50Any Combination of 2 Units ...................... $783.75Any Combination of 3 Units .................... $1155.00Any Combination of 4 Units .................... $1443.75Any Combination of 5 Units ................... . $1773.75Any Combination of 6 Units ................... . $2062.50Any Combination of 7 Units ................... . $2351.25Any Combination of 8 Units ................... . $2640.00Complete 9-Unit Set ................................$2887.50

Videotape Training on AbrasivesDesigned for those who evaluate, procure, or useabrasives for surface preparation. Describesdifferent abrasive types, their performanceproperties, their health and safety effects, andmore. No rental or preview available.Item #201-AB01Price: $214.50

See note at left for information on memberdiscounts on videotape purchases

MPI Maintenance Repainting Manual*Provides standards and practices formaintaining architectural finishing systems;assessing surface degradation; the preparationof wood, concrete, and other substrates;and the selection of suitable maintenancerepainting systems. Includes an illustratedguide to coating failures and applicationdefects, and an approved products list.Published by the Master Painters Institute (MPI).Item #201-MP-MAINSSPC Member Price: $173.25Non-Member Price: $247.50

MPI Architectural PaintingSpecification Manual*Also from MPI comes this collection ofstandards for architectural painting andwallcovering. Describes and evaluatesvarious interior and exterior finishing systemsfor wood, concrete, and other substrates,and presents an overview of recommendedsurface preparation methods. Includes asample project specification, and the MPIapproved products list.Item #201-MP-ARCHSSPC Member Price: $173.25Non-Member Price: $247.50

Industrial Painters TrainingStudent ManualThe Student Manual contains 29 individualmodules with essential information andinstruction on the equipment, materials, andpractices used in industrial coating projects.Item #201-94-07SSPC Member Price: $115.50Non-Member Price: $165.00

13

Painting and Decorating Craftsman’s Manual and Textbook*A comprehensive review of architectural, commercial, and industrial painting practices.Discusses coating materials, surface preparation, application methods and equipment,safety, coating failures, wallcovering, and more. Published by the Painting and DecoratingContractors of America (PDCA).Item #201-00-14SSPC Member Price: $173.25 * Not available as an SSPC OrganizationalNon-Member Price: $247.50 Member free publication selection

Industrial Painters TrainingDesigned to help novice blasters and paintersenhance their skills, raise their level ofprofessionalism, and perform their work in asafe, productive way. Topics include personalsafety; surface preparation and applicationmethods and equipment; mixing and thinning ofcoatings; basic coating inspection; surfacepreparation of concrete; environmental controlsand containment; reading and interpreting projectspecifications; quality control; and more.

Industrial Painters TrainingInstructor ManualThe Instructor Manual’s 29 modules (correspondingto those in the Student Manual) provide noteson instructor preparation, presentation guidelines,quizzes, answer keys, references, and more.Item #201-94-09SSPC Member Price: $115.50Non-Member Price: $165.00

NEW!

NEW!

Substantial savings on publication and videotape purchases are among the many benefits you’ll enjoy as an SSPC member!Join now and save on your order—see order form for further details!

Special Focus onCOMMERCIAL AND RESIDENTIAL PAINTING

14

Coatings Technology

Generic Coating TypesAn Introduction to Industrial MaintenanceCoating MaterialsOutlines and discusses the unique chemical properties,performance capabilities, surface preparation requirements,and application characteristics of 15 major genericclassifications of industrial maintenance coating materials.Appendices include an overview of basic coatingstechnology; a listing of coating, lining, and floor toppingmaterials; and a directory of product manufacturers.Item #201-95-08SSPC Member Price: $135.71Non-Member Price: $193.87

• Preface• The Basic Composition of Paint• Bonding—Cohesion and Adhesion

in Paint Systems• Elementary Organic Chemistry and

the Design of Polymeric Systems• The Chemistry of Film Forming Systems• Introduction to Coating Binders—

Natural Resins• Rubber-Based Coating Binders• Vinyl Resins• Acrylic Resins• Hydrocarbon Resins and Bituminous Binders• Cellulosic Resins• Vegetable Oils• Alkyd Resins• Polyester Resins• Formaldehyde Resins• Epoxy Systems• Polyurethanes• Silicone Resins• Silicate Resins

Here’s what you’ll find insidePROTECTIVE COATINGS: Fundamentals of Chemistry and Composition

• Pigments• Pigment Dispersion: Theory and Methods• Aesthetics: Gloss, Opacity, and Color• Prime Color and Hiding Pigments• Extender Pigments• Corrosion and Its Control by Coatings• Introduction to Viscosity and the

Evaporation of Solvent Systems• Solvent Families• Solvent Systems for Water-Borne Coatings• Formulating for Low VOC• Plasticizing• Catalysts• The Rheology of Coatings• Paint Flow and Related Phenomena• The Effect of Light and Radiation on Coatings• Film Enhancements with Aluminum Pigments• Miscellaneous Additives• Anti-Foulant Coatings• To Where from Here— Further Reading• Index

Workshop on Accelerated Testingof PaintsReports on a workshop organized andconducted by SSPC to examine and assessmethods for performance evaluation anddurability testing of coatings.Item #201-92-01SSPC Member Price: $40.42Non-Member Price: $57.75

Investigation of Cyclic Test Methodsfor Corrosion Protective CoatingsInvestigates the possible advantages of cyclictesting over conventional field and laboratorytesting methods for the prediction of long-termdurability.Item #201-91-03SSPC Member Price: $40.42Non-Member Price: $57.75

Investigation of StandardizedReference Paints for ImprovedPerformance EvaluationExamines the potential merits of usingstandardized reference paints to improvethe evaluation and procurement of coatingmaterials.Item #201-91-02SSPC Member Price: $40.42Non-Member Price: $57.75

Protective CoatingsFundamentals of Chemistry and Compositionby Clive H. HareThis popular work by the author of "PaintFilm Degradation: Mechanisms and Control"offers a comprehensive overview of basiccoatings chemistry in an accessible,straightforward way. Discusses the basicsof paint composition and polymer design;as well as the properties and functions ofnearly every ingredient used in theformulation of protective coatings.Item #201-94-17SSPC Member Price: $225.22Non-Member Price: $321.75

• Introduction• Alkyds• Epoxies for Steel• Epoxies for Concrete• Vinyls and Chlorinated Rubbers• Water-Borne Acrylics• Coal Tars and Asphaltics• Two-Component Polyurethanes• Moisture-Curing Polyurethanes• Organic Zinc-Rich

Here’s what you’ll find insideGENERIC COATING TYPES

• Inorganic Zinc-Rich• Silicones• Hybrids• Baking Phenolics• Polyesters and Vinyl Esters• Cementitious Linings• Basic Coatings Technology• Directory of Coatings, Linings, and

Floor Toppings• Coatings Company Profiles

15

Paint Film DegradationMechanisms and Controlby Clive H. HareThis new 631-page hardcover by the author of"Protective Coatings: Fundamentals of Chemistryand Composition" presents a scientific approach tothe analysis and prevention of common paint andcoating failures on industrial, commercial, andresidential structures. Discusses the structure,composition and properties of polymers used inpaints and coatings; the influence of variousphysical, chemical, and environmental agentson coating performance; failures on steel,concrete, wood, and other substrates; adhesionfailures and blistering; failures specific to primers;in-can stability of topcoats; and more.Item #201-01-14SSPC Member Price: $225.22Non-Member Price: $321.75

Introduction

Properties of Coatings

• The Molecular Structure of PolymericBinders

• The Glass Transition• Free Volume• Viscoelasticity

• The Mechanical Properties of CoatingFilms and Their Characterization

• Modulus, Time and Temperature• The Permeability of Coatings to Oxygen,

Gases and Ionic Solutions

Formulating Coatings

• Pigment Dispersion and Flocculation• Paint Flow and Rheology• Thixotropes and Flow Modifying Additives• Paint Flow Defects• Foaming and Defoaming

Failure Mechanisms

• Weather and Corrosion• Mechanically-Induced Failures• Adhesion and Blistering Failures• Chemically-Induced Failures• Light and Radiation Failures

• Heat-Induced Failures• Biologically-Induced Degradation and

Failure

Failures Related to Particular Substrates

• Problems with Coatings on ZincSubstrates

• Coating Systems for Aluminum Substrates

Here’s what you’ll find inside

PAINT FILM DEGRADATION: Mechanisms and Control

• Coating Systems for Miscellaneous Non-Ferrous Metal Substrates

• Painting Calcareous and CementitiousSubstrates

• Painting Architectural Substrates: Plaster,Drywall and Stucco

• Painting Masonry and Block Filler• Preparing Structural Concrete for Painting• Coatings for Structural Concrete• Wood and Wood Products as Substrates

for Paint• Painting or Repainting Weathered Wood• Problems with Pigmented Coatings on

Exterior Wood• Clear Coats for Wood

Failures of Primers• Barrier Coatings: Protection Mechanisms

and Design Principles• Inhibitive Primers for Metal: Fundamental

Considerations• Inhibitive Primers for Metal: Practical

Formulating and Service Problems• Principles for the Design of Zinc-Rich Primers• Single-Coat Zinc-Rich Systems• Multi-Coat Zinc-Rich Systems

In-Can Stability Problems of Topcoats• Can Stability of Oxidizing and Amino-

Crosslinking Systems• Variables in Polyurethane Formulations

and Their Effects on Performance• Can Stability of Epoxy Systems

Glossary of Acronyms and Abbreviations

Index

Corrosion and CoatingsAn Introduction to Corrosion for CoatingsPersonnelIntroduces the various mechanisms and formsof corrosion, the prevention and control ofcorrosion through the use of coatings, andother practices for maintaining corrosioncontrol. Individual topics include mechanismsof corrosion control by protective coatings,composition and film formation of organiccoatings, properties of generic coating types,the economics of corrosion control, and more.Item #201-98-08SSPC Member Price: $92.40Non-Member Price: $132.00

Corrosion Prevention by ProtectiveCoatingsProvides an introduction to the history, theory,and practice of high-performance coatings asan engineering approach to corrosion control.Discusses basic corrosion theory and coatingstechnology; essential coating properties; theimportance of surface preparation, structuraldesign, and coating specifications; coatingfailures; typical coating end-uses; and more.Published by NACE International .Item #201-00-16Price: $160.05No member discount; not available as an SSPCOrganizational Member free publication selection

NEW!

Substantial savings on publication and videotape purchases are among the many benefits you’ll enjoy as an SSPC member!Join now and save on your order!

Title Index

Balancing Economics and Compliance forMaintaining Protective Coatings ...................................... 11

BRIDGE AND HIGHWAY STRUCTURES ....................... 9, 10

CD-ROM ................................................................. 3, 4, 7, 8, 11

Coating and Lining Inspection Manual .............................. 7

COATINGS TECHNOLOGY ............................................. 14-15

COMMERCIAL AND RESIDENTIAL PAINTING ............... 13

Concrete Repair Manual ....................................................... 8

CONCRETE SURFACES .......................................................... 8

CONFERENCE PROCEEDINGS ...................................... 10, 11

Corrosion and Coatings: An Introduction toCorrosion for Coatings Personnel .................................... 15

CORROSION FUNDAMENTALS .......................................... 15

Corrosion Prevention by Protective Coatings ................ 15

EDUCATION AND TRAINING ....................................... 12-13

Effect of Surface Contaminants on Coating Life ............. 9

Evaluation of the Effectiveness of Wet BlastCleaning Methods on Surface Preparation ...................... 9

Expanding Coatings Knowledge Worldwide .................. 11

FAILURES AND APPLICATION DEFECTS ..................... 7, 15

Fall Protection: A Training Program for Employees .......... 12

Fundamentals of Cleaning and Coating Concrete ............... 8

Fundamentals of Cleaning and Coating ConcreteCD-ROM .................................................................................... 8

Generic Coating Types: An Introduction to IndustrialMaintenance Coating Materials ....................................... 14

Good Painting Practice: SSPC Painting Manual,Volume 1 ................................................................................... 3

Good Painting Practice CD-ROM ........................................ 3

Guidelines for Cost-Effective Lead Paint Removal .......... 10

Guides on Environmental Protection ................................. 6

ICRI Technical Guideline No. 03732: Selectingand Specifying Concrete Surface Preparation forCoatings, Sealers, and Polymer Overlays ......................... 8

ISO 8501-1:1988/SS 05 59 00 ................................................. 2

Increasing the Value of Coatings ...................................... 11

Industrial Lead Paint Abatement: Approaches,Alternatives, and Advances ............................................... 10

Industrial Lead Paint Abatement: MaintenanceStrategies for Corporate Facilities and Structures ........... 10

Industrial Lead Paint Abatement: PracticalTechniques for Complying with Regulations ...................... 10

Industrial Lead Paint Abatement: Preparingfor the Future ......................................................................... 10

Industrial Lead Paint Removal Handbook ....................... 10

Industrial Painters Training: Instructor Manual ............ 13

Industrial Painters Training: Student Manual ................ 13

Innovations for Preserving and ProtectingIndustrial Structures ............................................................ 11

INSPECTION ........................................................................ 6, 7

Inspection of Coatings and Linings: A Handbook ofBasic Practice for Inspectors, Owners, and Specifiers ..... 7

Investigation of Cyclic Test Methods forCorrosion Protective Coatings .......................................... 14

Investigation of Standardized Reference Paintsfor Improved Performance Evaluation ............................. 14

Lead and Other Safety, Health, and EnvironmentalIssues: Piecing Together the Critical Issues .................. 10

Lead-Based Paint Removal for Steel HighwayBridges.................................................................................... 10

LEAD PAINT REMOVAL ....................................................... 10

Masters Painters Institute (MPI) ArchitecturalPainting Specification Manual .......................................... 13

Masters Painters Institute (MPI) MaintenanceRepainting Manual ............................................................... 13

Maintenance Coating of Weathering Steel:Field Evaluations and Guidelines ........................................ 9

Maintenance Coating of Weathering Steel:Interim Report ......................................................................... 9

Managing Costs and Risks for Effective andDurable Protection ............................................................... 11

MARINE COATINGS ............................................................... 9

Paint Application Specifications ........................................ 6

Paint Film Degradation: Mechanisms and Control .......... 15

Painting and Decorating Craftsman's Manualand Textbook ......................................................................... 13

Performance Testing of Marine Coatings ......................... 9

Procedure Handbook: Surface Preparation andPainting of Tanks and Closed Areas .................................. 9

Project Design: Industrial Lead Paint RemovalHandbook, Volume 2 ............................................................ 10

Protective Coating Inspection Standards for Fieldand Shop Applications .......................................................... 6

Protective Coatings: Fundamentals of Chemistryand Composition ................................................................... 14

Protective Coatings Glossary: Terms from Coatingof Industrial Steel and Concrete Structures, FailureAnalysis, and Regulations .................................................. 12

Protective Coatings for Pulp and Paper Mills ................ 11

Protective Coatings for Pulp and Paper Mills,2nd Annual Seminar ............................................................. 11

Protective Coatings for Pulp and Paper Mills,3rd Annual Seminar ............................................................. 11

Qualification Procedures ...................................................... 6

Scaffolding Training Program............................................ 12

SHOP PAINTING ..................................................................... 6

Shop Painting of Steel ........................................................... 6

SSPC 2000: The Proceedings of the Seminars ............... 11

SSPC 2000 CD-ROM ............................................................. 11

SSPC 2001: The Proceedings of the TechnicalPresentations ........................................................................ 11

SSPC 2001 CD-ROM ............................................................. 11

SSPC 2002 Technical Presentations ................................. 11

SSPC 2002 CD-ROM ............................................................ 11

SSPC 99: The Proceedings of the Seminars ................... 11

SSPC PAINTING MANUAL ................................................3-5

SSPC-VIS 1: Guide and Reference Photographsfor Steel Surfaces Prepared by Dry Abrasive BlastCleaning .................................................................................... 2

SSPC-VIS 2: Standard Method for EvaluatingDegree of Rusting on Painted Steel Surfaces ................. 2

SSPC-VIS 3: Visual Standard for Power- andHand-Tool Cleaned Steel ...................................................... 2

SSPC-VIS 4/NACE VIS 7: Guide and ReferencePhotographs for Steel Surfaces Prepared byWaterjetting ............................................................................. 2

SSPC-VIS 5/NACE VIS 9: Guide and ReferencePhotographs for Steel Surfaces Prepared byWet Abrasive Blast Cleaning ............................................... 2

STANDARDS COMPILATIONS ................................. 4-5, 6, 8

Surface Preparation and Coating of Concrete ................ 6

Surface Preparation and Coatings Handbook ................. 9

Surface Preparation Specifications ................................... 6

SURFACE PROFILE .............................................................. 8, 9

Surface Profile Comparator ................................................. 9

Surface Profile for Anti-Corrosion Paints ......................... 9

Surface Texture (Profile) Measurement ............................ 9

Systems and Specifications, SSPC Painting Manual,Volume 2 ................................................................................... 4

Systems and Specifications CD-ROM ............................... 4

Technologies for a Diverse Industry ................................ 11

Value of Coatings.................................................................. 12

VIDEOTAPES .................................................................... 12, 13

Visual Comparison Manual: Application and CoatingDefects ...................................................................................... 7

Visual Comparison Manual CD-ROM ................................. 7

VISUAL STANDARDS, COMPARATORS, ANDREFERENCE PHOTOGRAPHS ...................................2, 7, 8, 9

Workshop on Accelerated Testing of Paints .................. 14

Catalog 2003

Documents

Transcript of Catalog 2003