Cat-Geneq Environment 2009

2 www.geneq.com [email protected]

Ge

ne

q

Dear Clients.

GENEQ inc. has been a leading supplier of Environmen-tal equipment for over 35 years. Our quest for success has been driven over the years by our clients’ satisfaction and our commitment to provide the best selection of instru-ments to meet your requirements.

We are pleased to introduce our new Environmental catalog, which shows a wide range of products that will interest the Environmental Engineer, Meteorologist, Re-searcher, Hydrogeologist, in short, anyone who works in the Environmental field.

We have tried to include as many products as possible in our catalog, but should you require more information on the products shown or on other models, please feel free to contact us or to visit our website.

Terms and Conditions - Prices are in Canadian Dollars (CDN$), and are subject to change without notice. - FOB GENEQ inc, Montreal (Qc), Canada. - Sales taxes, GST and PST, are extra when applicable. - Payment terms are NET 30 days for established credit. You can fill a credit application form on our website at www.geneq.com under «Forms». - If this is your first purchase with us and/or if it is under $500.00, we do accept credit cards and Master Card , check in advance or cash. - Warranty: GENEQ inc. honors the same warranties offered by its suppliers.

How to reach us:

E-mail: [email protected] for all sales and information inquiries

Website: Detailed product catalog at www.geneq.com

Phone: (514) 354-2511 and 1-800-463-4363

Fax: (514) 354-6948

Business hours: 8:30 AM to 5:00 PM, Monday to Friday

Mail: GENEQ inc.

8047, Jarry St. East, Montreal, Quebec,

Canada H1J 1H6

Table of Contents

Our catalog is divided into 6 sections to facilitate your search. Please consult our detailed Alphabetical Index on page 75.

Water.........................3 to 24

Weather............... ....25 to 36

Air...........................37 to 52

Soil..........................53 to 58

Laboratory...............59 to 69

Miscellaneous...........70 to 72

31 800.463.4363

Wa

te

r

Waterproof Testers

Specifications pHep®4 pHep®5 DiST®5 DiST®6 ORPpH/EC Combo

pH/EC Combo

Model Number HI 98127 HI 98128 HI 98311 HI 98312 HI 98120 HI 98129 HI 98130

Range

pH: -2.0 to 16.0 •

pH: -2.00 to 16.00 •

pH: 0.00 to 14.00 • •

EC: 0 to 3999 μS/cm • •

EC: 0.00 to 20.00 mS/cm • •

TDS: 0 to 2000 ppm • •

TDS: 0.00 to 10.00 ppt • •

ORP: ±1000 mV •

Temp.: -5.0 to 60.0°C /23.0 to 140.0°F • • •

Temp.: 0.0 to 60.0°C /32.0 to 140.0°F • • • •

Resolution

0.1 pH •

0.01 pH • • •

1 μS/cm EC • •

0.01 mS/cm EC • •

1 ppm TDS • •

0.01 ppt TDS • •

1 mV ORP •

0.1°F/°C • • • • • • •

Accuracy (@20°C/68°F)

±0.1 pH •

±0.05 pH • • •

±2% F.S. EC/TDS • • • •

±2 mV ORP •

±0.5 °C • • • • • • •

±1 °F • • • • • • •

CalibrationpH Automatic* • • • •

EC/TDS Automatic** • • • •

Automatic Temperature Compensation • • • • • •

Battery Type (4) 1.5V

Battery Life (hours) 300 300 100 100 300 100 100

Battery Error Prevention System (BEPS) • • • • • • •

Auto-off after 8 minutes • • • • • • •

Dimensions/Weight 163 x 40 x 26 mm (6.4 x 1.6 x 1”)/85 g (3.0 oz.)

Cat. No. Description Price Cat. No. Description PriceHI98127-00 pH Tester with Replaceable Electrode $ 92.00 HI98120-00 ORP and Temperature Meter $ 132.00HI98128-00 pH Tester with Replaceable Electrode $ 105.00 HI98129-00 pH/EC/TDS/Temperature Combo Tester $ 155.00HI98311-00 EC/TDS/Temperature Tester $ 105.00 HI98130-00 pH/EC/TDS/Temperature Combo Tester $ 155.00HI98312-00 EC/TDS/Temperature Tester $ 105.00


Wa

te

r Water Quality MultiprobeModel Manta 2 The Manta 2 takes the Manta 1’s utility a step further by associating most of each sensor’s circuitry with the sensor instead of elsewhere in the basic multiprobe’s base unit. In the Manta 2, the sensor circuitry is built into the sensor itself. This architecture solves two of the most pernicious problems that have faced multiprobe users for decades. First, you are not purchasing circuitry for sensors that you do not need as in most multiprobes in the market and second, troubleshooting is now simple and downtime should be less than a day if ever a problem occurs.

Parameter Range Accuracy ResolutionTemperature -5°C to 50°C ±0.1°C 0.01°CPolargraphic (Clark) DO

Dissolved Oxygen 0 to 50 mg/L(mg/L)Dissolved Oxygen 0 to 200% (% Sat) 200 to 500% Optical DODissolved Oxygen 0 - 25 mg/L 1% of reading 0.01 mg/L(mg/L) or 0.02 mg/l,Dissolved Oxygen 0 to 200% 0.1 whichever is greater(% Sat)Conductivity (SC) 0 - 100 mS/cm 1% reading ± 1 countTurbidity 0 - 100 < 1% of readingsOptical 90° 0 - 3000 NTU 100 - 400 < 3% of readings 0.1Nephelometric Mechanical Wiper over 400 < 5% of readingspH 0 - 14 units ± 0.2 units 0.01 unitsORP -999 - 999 mV ± 20 mV 1 mV

Cat. No. Description PriceEUMANTA2-0 Water Quality Multiprobe Model Manta 2 Price on request

Nomad 800 Handheld Computer The Nomad™ outdoor rugged handheld computer from Tripod Data Systems™ to pack even more functionality into one of the most powerful and fullfeatured mobile devices available. Start with an 806 MHz processor, up to 2 GB of Flash storage, a long-life battery and integrated wireless capabili-ties like GPS, 802.11g, WWAN and Bluetooth1. Then select an optional integrated laser bar code scanner and color digital camera. The Nomad handheld also features a high-resolution, sunlight-visible VGA display that shows graphics and maps in crisp detail. And it’s fully rugged which means the Nomad handheld offers a lower Total Cost of Ownership (TCO) than consumer-grade handhelds2.

PhysicalSize: 6.92” (17.6 cm.) x 3.92” (10.0 cm) x 1.96” (5.0 cm)Weight: 21 ounces (596 g) including rechargeable battery

Multiparameter Water Quality MeterModel HI 9828 from Hanna(Optional GPS)

• pH • pH/mV • ORP • % Saturation DO • mg/L DO • EC • Absolute EC • Resistivity • TDS • Salinity • Seawater specific gravity • Atmospheric pressure • Temperature

Features• Display up to 12 parameters• Graphic LCD with backlight• Meter features IP67 and probe features IP68 waterproof protection• Exclusive T.I.S. Tag Identification System simplifies test logging• Quick Calibration feature calibrates all sensors with one solution• Built-in barometer• Measurement check eliminates any erroneous readings• Auto recognition of pH/ORP probe• LOGGER function memorizes the data of all connected sensors• Log-on-demand and automatic logging (up to 60,000 samples)• Can display logged data as graphs• USB for PC connectivity• Auto-range of EC and TDS readings• Good laboratory practice feature with the latest 5 calibrations recorded• All sensors are field replaceable• Meter accepts both alkaline and rechargeable batteries• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Cat. No. Description PriceHI98284BODE Multi-Parameter Water Quality $ 2400.00 Portable Meter with 4m probe cableHI982810BODE Multi-Parameter Water Quality $ 2500.00 Portable Meter with 10m probe cableHI982820BODE Multi-Parameter Water Quality $ 2600.00 Portable Meter with 20m probe cableHI982850BODE Multi-Parameter Water Quality $ 2900.00 Portable Meter with 50m probe cable

Features• Windows Mobile 6 (Professional in WWAN models; Classic in all other models)• Marvell 806 MHz XScale processor• 128 MB DDR SDRAM• 512 MB to 1 GB non-volatile flash storage• Full VGA display, sunlight-readable color TFT• Touchscreen• Rugged submersible design• Integrated speaker, microphone and Bluetooth 2.0• Secure Digital (SDIO) slot• Notification LEDs• USB host and client• Audio jack• 15 hour battery life with active use (default settings)• Keypad backlighting for night use• 12-month limited warranty

Cat. No. Description PriceTDSNOM800B TDS Nomad Model 800 $ 2100.00

51 800.463.4363

Wa

te

r

Multi-Parameter Water Quality MeterModel WTW 3500i The new Multi 3500i can measure pH, mV, ISE, oxygen, and conductivity. If desired, pH, oxygen, conductivity, and temperature can be measured simultaneously; in the laboratory using the combined conductivity/oxygen sensor ConOX, in the field with the multi-parameter probe MPP 350.

• Multi-functional, high degree of accuracy• Works with all current WTW electrodes • All parameters simultaneously displayed • High resolution, high precision, simple, menu driven operation with backlit display • Datalogger memory for 1,500 data sets• Works with the MPP 350 (pH, Cond and O2) and ConOX (Cond and O2) electrodes for simultaneous measurement of parameters

Cat. No. Description Price WTW2F40110 Multi 3500i Meter only $ 1820.00

Multi-Parameter Probe Model MPP 350

An all-new Multi-Parameter Probe as the perfect probe for use with Multi 3500i• pH, conductivity, dissolved oxygen and temperature at the same time• For all areas of application in surface waters and 2 inch boreholes• Depth measurement up to 330 ft (100 m)

SpecificationsRangepH 4 to 12 O2 0 to 200% Conductivity 1 μS/cm to 2 S/cm DimensionsDiameter 41, 5 mm, Approx. Length 290 to 410 mm (depends on special accessories)WeightApprox 700 g

Cat. No. Description Price WTW401100- MPP 350-3 Multi probe with 3 meter cable $ 2780.00 (pH Sensor sold seperately)

Single Parameter Handheld Meters Model WTW 3310

• Professional, field proven meters• Backlit LCD-graphic display for mobile measurement• Interval controlled data-logging function for up to 5000 records – perfect for monitoring extended data in the field• Guaranteed waterproof mini-USB interface for field application• Fast data output to lap-top or desk-top via USB

Specifications

Model pH 3310 Oxi 3310 Cond 3310 All values ±1 digit All values ± digit All values ± digitpH -2.0 to 19.9 ±0.1 pH – – -2.00 to 19.99 ±0.01 pH – – -2.000 to 19.999 ±0.005 pH – –mV ±1200.0 mV ±0.3 mV – – ±(2000 ±1) mV – –Dissolved – 0.00 to 19.99 mg/L –Oxygen ±0.5% of valueConc. 0 to 90 mg/L – ±0.5% of value Sat. – 0.0 to 199.9% – ±0.5% of valuePartial – 0 to 600% –Pressure ±0.5% of value – 0 to 199.9 hPa, – ±0.5% of valueConductivity 0.00 to 1000 mS/cm ±0.5% v. Mw. – – 0.00 to 1.999 μS/cm, K = 0.01 cm-1 0.00 to 19.99 μS/cm, K = 0.1 cm-1Spec. – – 0.00 to 20 Mohm cmResistance Salinity – – 0.0 to 70.0 (acc. IOT)TDS – – 0 to 1999 mg/l, 0 to 199, 9 g/lTemperature -5.0 to 105.0°C ±0.1°C

Cat. No. Description PriceWTW2AA310- pH 3310 Instrument only $ 800.00WTW2BA300- Oxi 3310 Instrument only $ 1060.00WTW2CA300- Cond 3310 Instrument only $ 1095.00


Wa

te

r Waterproof pH/ORP and Temperature MetersModel HI 991001

SpecificationspH Range -2.00 to 16.00ORP Range -Temperature Range -5.0 to 105.0°C or 23.0 to 221.0°FpH Resolution 0.01ORP Resolution -Temperature Resolution 0.1°C or 0.1°FpH Accuracy (@20°C/68°F) ±0.02ORP Accuracy (@20°C/68°F) - Temperature Accuracy ±0.5 up to 60°C, ±1°C up to 105°C (@20°C/68°F) ±1°F up to 140°F, ±2°F up to 221°FTypical EMC Deviation (pH) ±0.02Typical EMC Deviation (ORP) -Typical EMC Deviation (Temp.) ±0.2°C or ±0.4°FpH Calibration Automatic 1 or 2 points with 2 sets of standardized buffers (4.01, 7.01, 10.01 or 4.01, 6.86, 9.18)

Temperature Compensation Automatic from -5 to 105°C (23 to 221°F) (for pH only)

Cat. No. Description Price HI991001-0 pH/Temperature Meter $ 350.00

Authorized Distributor of:

Orion 5-Star PluspH/RDO/Conductivity Portable Meter

Specifications

DOConcentration Range 0.00 to 20.0 mg/LResolution 0.01, 0.1 mg/LRelative Accuracy ±0.1 mg/L up to 8 mg/L; ±0.2 mg/L from 8 to 20 mg/L% Saturation Range 0.0 to 200%Resolution 0.1, 1%Relative Accuracy ± 2%Barometric Pressure 450 to 850 mm Hg,Correction automatic or manual

pH Range –2.000 to 19.999Resolution 0.1, 0.01, 0.001Relative Accuracy ± 0.002

mV, Rel mV, ORP Range ± 1999.9 mVResolution 0.1 mVRelative Accuracy ± 0.2 mV or 0.05% of rdg, whichever is greaterTemperature(when RDO sensor is not used)Range –5 to 105 °CResolution 0.1 up to 99.9 °C, 1.0 over 99.9 °CRelative Accuracy ±0.1 °C

Conductivity Range 0.000 to 3000 mS/cm, auto resolution, cell constant dependentResolution 4 significant digits down to 0.001 μS/cm, cell constant dependent

Cat. No. Description PriceTO1213321- 5-Star pH/RDO/Conductivity Portable Meter Kit $ 2775.00

71 800.463.4363

Wa

te

r

Orion 5-Star PluspH/ORP/ISE/Cond/DO Portable Meter

Specifications

Temperature Range - 5 to 105 ˚CResolution 0.1 up to 99.9 ˚C, 1.0 over 99.9 ˚CRelative Accuracy ± 0.1 ˚C

pH Range - 2.000 to 19.999Resolution 0.1, 0.01, 0.001Relative Accuracy ± 0.002

ISE Range 0 to 19999Resolution 1, 2, or 3 significant digitsRelative Accuracy ± 0.2 mV or 0.05%, whichever is greaterUnits M, mg/L, %, ppb, or no unitsCalibration Features Linear point to point, non-linear selectable auto-blank, low concentration range stabilitymV Range ± 1999.9Resolution 0.1Relative Accuracy ± 0.2 or 0.05%, whichever is greaterConductivity Range 0.000 to 3000 mS/cm, auto resolution with cell constant dependenceResolution 4 significant digits down to 0.001 μS/cm, cell constant dependent

Cat. No. Description PriceTO1219001- pH/ORP/ISE/Cond/DO Portable Meter Kit $ 3025.00

Orion 5-Star Plus pH/ORP/Cond/DO Portable Meter

Specifications

DOConcentration Range 0.00 to 90.0 mg/LResolution 0.1, 0.01 mg/LRelative Accuracy ± 0.2 mg/L% Saturation Range 0.0 to 600 %Resolution 0.1, 1 %Relative Accuracy ± 2 %Barometric Pressure 450 to 850 mm Hg, Correction Automatic or Manual


mV Range ± 1999.9Resolution 0.1Relative Accuracy ± 0.2 or 0.05%, whichever is greater


Conductivity Range 0.000 to 3000 mS/cm, auto resolution with cell constant dependenceResolution 4 significant digits down to 0.001 μS/cm, cell constant dependent

Cat. No. Description PriceTO1218001- 5-Star pH/ORP/Conductivity Portable Meter Kit $ 3265.00

Orion ROSS® pH Electrodes Model 8165

ROSS Sure-Flow Electrodes provide a free-flowing sleeve junction especially designed for measurement in general pH samples as well as viscous or colloidal samples whenever best performance is desired.

SpecificationspH Range 0-14Temperature Range 0-100°CInternal Reference ROSSJunction Sure-FlowDimensions 120 mm x 12 mmpH Precision 0.01Fill Solution 3 M KCI

Cat. No. Description PriceTO8165BN-0 ROSS Sure-Flow pH Electrode $ 540.00


Wa

te

r Field-Proven Monitor of Suspended Solids and Turbidity Model OBS-3+

Features• Measures turbidity and suspended solids• Compact low-power probe• Integral voltage clamp and 4–20 mA current loop• MCBH-5-FS, wet-pluggable connector

Applications• River and stream gauging• Add-on sensor for CTDs, data loggers, and current meters• Monitor dredging and mining operations• Permit compliance• Control water quality in settling ponds and tanks• Sediment transport research• Laboratory measurements

SpecificationsRangeTurbidity 0–2,000 NTUSSC* Mud 0–2,500 mg/l, Sand 0–50 g/lAccuracyTurbidity 0.25 NTU or 1% of reading*Concentration Mud 0.5 mg/l or 1% of reading* Sand 0.25 g/l or 1% of reading* Other DataInfrared wavelength 850 nmMaximum depth 500 m

Cat. No. Description PriceDAOBS3-000 OBS3+ Turbidity Sensor with Stainless On request Steel Body

D-OPTO Optical Dissolved Oxygen Transmitter

SpecificationsOutput SDI-12 or 4-20 mA (with converter)Dissolved OxygenAccuracy 1% of reading or 0.02 ppm, which ever is greaterResolution 0.01% Saturation, 0.001 ppmRange 0.00 to 25.0 ppmRepeatability 0.01 ppmResponse time 90% in less than 60 secondsTemperature Compensated 0 to 50°CSensor Drift Less than 1% per year

TemperatureAccuracy: ±0.1°C Resolution: 0.01°C Range: 0 to 50°C

Microprocessor Based Turbidity Meter Model ANALITE 160

SpecificationsRange 0.0 to20,000NTU (4,000NTU limit on 90° probe) (Over four ranges automatically determined)Display 2 line, 16-character dot matrix alphanumeric liquid crystal displayDisplay language English standard, other languages available to orderParameters displayed Turbidity (NTU) – default Relative Turbidity Reference (NTU) Relative Turbidity (Turbidity - Relative Turbidity Reference NTU) Date/Time - defaultReading Updated every 1 secondAveraging period 0.5 second or 10 seconds nominal - user selectableRange Steps <0.1 to 20NTU, <1 to 200NTU, <10 to 2,000NTU <100 to 20,000NTU (using 180° probe only)Resolution 0.02NTU, 0.1NTU, 1NTU, 10NTU

Cat. No. Description PriceNEP160310- Portable Turbidity Meter/Logger $ 3150.00 Programmable Display Unit only with RS232NEP160105- Portable Turbidity Meter/Logger with wide $ 5475.00 range 180° NEP280 Probe, 5m cable and RS232.NEP160305R Portable Turbidity Meter/Logger $ 5250.00 with high sensitivity 90° NEP260 Probe, 5m cable with RS232.

Depth Rating Maximum 30m water depthOperating Voltage 9-15 VDCCurrent Draw 10 mA during measurement, 0.5 mA standbySize of Transmitter 48mm (1.89”) diameter x 156mm (6.173”) longTransmitter Construction Acetyl, stainless steel, cast epoxyWeight 1 lb.Cable 4 core, 20 AWG, shielded, EPDM jacket

Cat. No. Description PriceGLDOPTO-00 Optical Dissolved Oxygen Transmitter, $ 5200.00 with 25 ft of cable.GLDOPTO420 Optical Dissolved Oxygen Transmitter, $ 5875.00 with 4-20mA converter and 25 ft of cableGLDOPTOCBL Extra Cable for Transmitter $ 30.00/feet

91 800.463.4363

Wa

te

r

Orion AQUAfast IV Turbidimeter

The AQ4500 Turbidimeter has dual source LEDwhich allows readings that comply with both EPA 180.1 and ISO 7027 methodologies.

• Nephelometric and Ratiometric measurements with autoranging• Data log capacity of up to 100 data points.• Readings in the range of 0 - 1000 NTU with a choice of units: NTU, FTU, FNU, ASBC or EBC• Includes turbidity standards kit, rugged carrying case, and replacement cuvettes•The AQ4500 is truly IP67 waterproof to a depth of 3 meters

Chemical Oxygen Demand (COD) chemistries comply with EPA guidelines and work with the AQUAfast II or IV colorimeters

• Ideal for environmental and wastewater monitoring• Convenient, ready to use reagent vials available in three ranges: 0-150 mg/L, 0-1,500 mg/L and 0-15,000 mg/L• COD reactor has a wide range of preset temperature and preset times• Substantially reduces waste disposal - smaller reagent volumes and reduced danger of spills

Cat. No. Description PriceTOAQ4500-0 Water Quality Turbidity Meter, Model AQ4500 $ 1595.00


LaMotte Turbidity MetersModel 2020e

SpecificationsUnit of Measure NTU, FNU, FAU, ASBC, EBCRange 0-4000Resolution 0,01 NTU/FNU 0,00-10,99 0,1 NTU/FNU 11,00-109,9 1 NTU/FNU 100-4000Accuracy ±2%Detection Limit 0,05 uTN/FNURange Selection AutomaticRange Selection 0,02 NTU/FNU. 0,5 FAULight Source 860nm (ISO)Tungsten (EPA)

FeaturesBattery 9VData Logging 4000 pointsLanguages English, French, Spanish, Japanese, Italian, Portuguese

Kit supplied with 0, 1, and 10 NTU standards, sample bottle, 4 sample tubes, and extra battery.

Cat. No. Description PriceLAM1979EPA Digital Turbidity Meter Model 2020e $ 995.00

Fluoride TRACER PockeTester

Features• First Fluoride Meter with built-in Automatic• Temperature Compensation• Fastest response Fluoride Meter (<1 min.)

• Easy use for field or laboratory fluoride testing• Small sample/TISAB volume required for testing• In compliance with EPA Method 340.2 (Potentiometric Ion Selective Electrode)

• Automatic electronic 1 or 2 point calibration with offset adjustment

Specifications Range Max Resolution Basic AccuracyPpm 0.1 to 10 ppm 0.1 ppm ±3% rdgTemperature 32 to 140°F 0.1°F ±1.8°F (1°C)

Dimensions 1.4 x 6.8 x 1.6” (36 x 173 x 41mm)

Weight 7.4 oz (210g)

Cat. No. Description PriceLAM1756-00 Fluoride Tracer PockeTester $ 445.00LAM7024J-0 TISAB Reagent, 100 Tablets $ 16.00LAM1757-00 Replacement Electrode $ 265.00LAM2798M-0 Fluoride Standard, 1 ppm, 1000 Ml $ 22.00LAM4154H-0 Fluoride Standard, 1,000 ppm, 60 mL $ 16.00LAM4154L-0 Fluoride Standard, 1,000 ppm, 500 mL $ 42.00


Wa

te

r TC-3000 Tri-Meters

Turbidity, Color, & Chlorine – All In One MeterLaMotte offers 2 versions of the TC-3000. The TC-3000i uses an IR LED and meets the requirements of the ISO 7027 standard. The TC-3000e uses a tungsten lamp and meets the specifications of EPA 180.1.

Battery 9 VAC Power OptionalData Logging 4000 pointsAuto Shut-Off Disabled, 5, 10, 30Languages English, French, Spanish, Japanese, Italian, PortugueseResponse Time <5 seconds

Kit supplied with 0, 1, and 10 NTU standards, sample bottle, 4 sample tubes, DPD tablets, and extra battery.

TurbidityUnit of Measure NTU, FNU, FAU, ASBC, EBCRange 0-4000Resolution 0,01 NTU/FNU 0.00-10.99 0.1 NTU/FNU 11.00-109.9 1 NTU/FNU 110-4000Range Selection AutomaticAccuracy ±2%Detection Limit 0,05 NTU/FNUReproducibility 0,02 NTU/FNU 0,5 FAUStray Light <0,02 NTU FNULight Source 860nm LED (ISO), Tungsten (EPA)Signal Averaging Disabled, 2, 5, 10

Chlorine• Liquid and tablet DPD calibrations for free and total chlorine measurement• Wide-range accomplished with same cell and reagent dosage• Low level detection• User selected units ppm or mg/l

Range 0-10 ppmResolution 0,01 ppm (0-5)/0,1 ppm (5-10)Accuracy 0,05 or ±2%Detection Limit 0,02 ppmResponse Time <5 secondsLight Source 525 nm LED

Color• UV LED and micro-focusing optics enable low level detection• Uses same sample vial as turbidity and chlorine tests

Range 0-500 cuResolution 0,1 cu (0-99,9 cu)Accuracy ±0,5 cu or 2%Detection Limit 0,2 cuResponse Time <5 secondsLight Source UV LED 375 nm

Cat. No. Description PriceLAM1964EPA TC-3000 kit, EPA version $ 1285.00LAM1964ISO TC-3000 kit, ISO version $ 1285.00

EPA Compliant Turbidity and Chlorine Meter Model HI 93414

Specifications Range 0.00 to 9.99; 10.0 to 99.9 and 100 to 1000 NTURange Selection AutomaticResolution 0.01 NTU from 0.00 to 9.99 NTU; 0.1 NTU from 10.0 to 99.9 NTU; 1 NTU from 100 to 1000 NTUAccuracy ±2% of reading plus 0.02 NTURepeatability ±1% of reading or 0.02 NTU, whichever is greaterStray Light < 0.02 NTUTypical EMC Deviation ±0.05 NTULight Detector Silicon PhotocellMethod Ratio Nephelometric Method (90°), ratio of scattered and transmitted light; Adaptation of the USEPA Method 180.1 and Standard Method 2130 B.Measuring mode Normal, Average, ContinuousTurbidity Standards 1, 10, 100 and 750 NTUCalibration Two, three or four-point calibration

Cat. No. Description PriceHI93414-00 EPA Compliant Turbidity and Chlorine Meter $ 1095.00

111 800.463.4363

Wa

te

r

LaMotte SMART2 Colorimeter The SMART2 is the most user-friendly colorimeter in the field or in the laboratory. Over 50 pre-programmed tests give you quick and reliable readings of your water samples. Ten other tests can also be programmed according to your needs.

• Range 0 to 125% T• Resolution 1% full scale• Accuracy 2% full scale• Light source Filter set up at 430, 520, 570 and 620nm• Memory RS-232 with time and date• Accepts square 10mm cuvettes, round 25mm cuvettes and 16mm COD tubes• Power 9V battery or AC adapter• Supplied with 4 sample tubes and AC adapter

Cat. No. Description PriceLAM1919-00 SMART 2 Colorimeter $ 995.00

Partial List of Most Popular Reagent / TestsProducts Code Reagents Range Number of Tests4318-H Alkalinity UDV 0-200 503641-SC Aluminium 0-0.3 503659-01-SC Ammonia-Nitrogen 0-1.0 253644-SC Chlorine Dioxide 0-8.0 503698-SC Chromium 0-1.0 1000075 COD 0-150 25NA Colour 0-1000 ∞3640-SC Copper 0-3.5 503691-SC Hardness 0-500 503648-SC Iron 0-6 504031 Lead 0-5.0 503658-SC Manganese 0-0.7 503649-SC Nitrate-Nitrogen 0-3.0 203650-SC Nitrite-Nitrogen 0-0.8 203651-SC Ozone 0-0.4 1003653-SC Phosphate 0-3.0 503639-SC Potassium 0.5-10.0 1003665-SC Sulfate 0-100 100NA Turbidity 0-400 ∞3667-SC Zinc 0-3.0 50

Contact us for complete list of available reagents and prices

LaMotte Chlorine Colorimeter Model 1200 • Free and total chlorine of 0 to 4 ppm• Sensitivity: 0.05ppm• Meets EPA standards• Interface: RS-232• Power: 1 x 9V battery• Supplied complete with 100 reagent tabs, 6 vi-als with closures, user guide and carrying case

Cat. No. Description PriceLAM367001- Single Test Colorimeter Labs, Model 1200 $ 455.00

Multiparameter ColorimeterModel C201

The multiparameter colorimeter model C201 is simple to use and offer’s one-time blanking for taking multiple measurements. The waterproof and dustproof housing achieve an IP67 rating-even the sample chamber is waterproof. The compact size means you can take the C201 multiparameter colorimeter virtually anywhere. The convenient, foil pack reagents follow US EPA Method 330.5 for Wastewater and Stan-dard Method 4500-CI G for drinking water.

Applications • Water Quality: Use for a testing drinking water or wastewater applications• Environmental/Agricultural: Use for a checking water in lakes and streams• Pool and Spa: Complete water testing for your pool water• Educational: Ideal for quick, accurate tests in labs and schools

Cat. No. Description PriceOAWD356452 Multiparameter Colorimeter Model C201 $ 395.00

The models C301 and C401 also are available

PhotoFlex Portable Photometer with pHThe portable photometer pHotoFlex demonstrates its capability with complex tasks in environmental and process monitoring at changing locations.

• More than 150 methods available• Integrated pH measurement• Color measurements

SpecificationsLight source LED Wavelengths nm 436, 517, 557, 594, 610, 690 User-defined methods 100 Methods / Software update 3 Data storage 1000 data sets pH range 0-16 Turbidity - Accuracy Photometry < 2nm wavelength accuracy, 0.005 abs. reproducibility pH ±0.01 pH / Turbidity -Auto-zero adjusment / calibration Photometry With start of new method, with LabStation once a day pH / Turbidity 3 pointsInterface RS 232, USB via adapter (optional) Measuring parameters Photometry, pHBattery Type AA batteries 4x1.5 V, for approx. 3000 measurements Test marks cETLus Warranty 2 years

Cat. No. Description PriceWT251100-0 PhotoFlex Portable photometer with pH $ 2195.00


Wa

te

r Coaxial Cable Water Level Meter

Model 102

The Solinst Model 102 Water Level Meter is de-signed to measure groundwater levels, especially in small diameter tubes and piezometers or where a flexible cable is needed to snake past an in-well pump. The cable has a heavy-duty jacket and stainless steel coaxial conductors for strength. Permanent markings are precisely laser etched on the cable every 1/100 ft. or each millimeter.

FeaturesLow Cost • Solinst quality at a low priceNarrow • Narrow 1/4” (6 mm) dia. probeLong Life • Rugged, corrosion proof components • Strong, flexible cable, is easily spliced • Replacement probes, cables and partsAccurate • Laser Markings every 1/100 ft. or mm • Traceable to national standards

Cat. No. Description PriceSO109256-0 Model 102 water level meter with 30m cable $ 366.00SO109257-0 Model 102 water level meter with 60m cable $ 406.00

Solinst Water Level Meter Model 101

• Measures water levels in wells and boreholes• Graduated in m, cm and mm• Stainless steel probe and strong polyethylene cable• Visual and sound indication• Cable lengths up to 1,500m

Cat. No. Description PriceSO100289-0 Water level probe with 30m cable $ 577.00SO100286-0 Water level probe with 50m cable $ 587.00SO102974-0 Carrying case $ 75.00

Solinst Interface Meter with 30m Cable Model 122

• Ideal to measure water/oil level in wells.• Uses an infrared beam• Graduated in m, cm and mm• Available cable length up to 450m• Carrying case included

Cat. No. Description PriceSO103764-0 122 Interface Meter, P1/M3/30m $ 1095.00

Solinst TLC Meter (Temperature, Level, Conductivity)

Model 107

The Solinst TLC Meter displays accurate measurements of conductivity and tem-perature on an LCD display that rotates for reading convenience. Water level and probe depth measurements are read off the accu-rate Solinst flat-tape marked each 1/100-ft. or millimeter. The tape is housed on a standard solinst reel. These features make the TLC Meter ideal for profiling conductivity and temperature in wells and open water.

• Accuracy as good as 2% of readings• Convenient Solinst reel and accurate tape• Length to 300-ft. or 100 meters• Display that rotates for easy reading• Standard 9V alkaline battery gives 90 hrs.• Auto-Off after 4 minutes

Applications• Profiling conductivity and temperature in wells and open water• Salt-water intrusion investigations• Water quality impairments from road salt• Tracer tests• General indication of chemical contamination level• Early warning of changes in water quality

Cat. No. Description PriceSO107445-0 Model 107 TLC meter with 3/4” probe, 30m $ 1145.00SO107446-0 Model 107 TLC meter with 3/4” probe, 50m $ 1215.00SO107447-0 Model 107 TLC meter with 3/4” probe, 100m $ 1425.00

Mini Interface Meter Model 122M

Features• Sensor accuracy to 1/200 ft. or 1.0 mm• Certified intrinsically safe• 5/8” (16 mm) diameter probe• Easy access batteries: minimum 120 hours of life• Automatic shut off after 10 minutes• Inexpensive, simple repairs

Cat. No. Description PriceSO106736-0 122 Mini Interface Meter, 20m $ 830.00

131 800.463.4363

Wa

te

r

Solinst Telemetry SystemsModel 9100

Applications

Water level, temperature and/or rainfall monitoring for:• Faster, easier access to data• Remote or difficult-to-access locations• Hazardous or critically important sites• Long-term applications• Drought and water taking management• Watershed management• Landfill supervision• Flood and stormwater management

As Simple as 1-2-3 …

• Set-up your system in the office

• Install easily in the field

• Start collecting data

Advantages• Time and cost savings• Reliable data transfer direct to your desktop• Manage the data yourself• No data hosting fees• Flexible options to suit site/application conditions• Low maintenance• Enhanced power management• Data is sent from the site to you, no timing issues

Cat. No. Description PriceSO108738-0 STS Gold Telemetry System, Model 9100 $ 3265.00

Leveloader Gold Model 3001

The Leveloader Gold is a significantly improved, backward compatible data transfer unit designed for use with all versions of the Solinst Levelogger and Barologger. It is used to download and store multiple Levelogger data files, us-ing 8 Mb of non-volatile FLASH memory.

The Leveloader has a rugged, water-resistant, ergonomic exterior and stores up to 1,390,000 LT readings, 930,000 LTC readings or 34 full Lev-elogger downloads. Stored data can be scrolled through before transfer to a PC. The Leveloader can also be used to display data in real-time, which is ideally suited for conducting conventional pump tests.

Features• Backwards compatible• Solinst designed hardware and software• Free upgradeable firmware• High accuracy real-time clock Easy-read screen

Advantages• Real-Time View option• Robust, water-resistant, ergonomic exterior• 8 Mb non-volatile FLASH memory• Holds over 1.3 million readings• Stores 10 personalized logging setups

Cat. No. Description PriceSO108354-0 Leveloader Gold, Model 3001 $ 623.00 (RS232/USB) c/w cables


Wa

te

r Levelogger SeriesModel 3001

Levelogger Gold Levelogger JuniorPressure Transducer Piezoresistive Silicon in 316L Stainless Steel Piezoresistive Silicon in 316L Stainless SteelCalibrated Ranges: 15, 30, 60, 100, 300 ft, Atmospheric Barologger 15, 30 ft, 5, 10 m 5, 10, 20, 30, 100 m, Atmospheric Barologger Accuracy (typical) 0.05% FS ± 0.010, 0.016, 0.032, 0.064, 0.328 ft. 0.1% FS ± 0.02, (± 0.3, .5, 1, 1.5, & 5 cm) 0.03 ft (± 0.5, 1 cm) Barologger: ± 0.003 ft. (0.1 cm)Resolution M5/F15: 0.001 % FS, M5/F15: 0.028 % FS Other Ranges: 0.0006 % FS, M10/F30: 0.021 % FS Baro: 0.002% FS Temp Comp Range -10 to +40°C -10 to +40°CTemperature Sensor Platinum RTD Platinum RTDTemperature Accuracy ± 0.05°C ± 0.1°CTemperature Resolution 0.003°C 0.1°COperating Temp Range -20 to +80°C -20 to +80°CSize 7/8” x 6” (22 mm x 154 mm) 7/8” x 5.5” (22 mm x 140 mm)Weight 6.3 oz (179 grams) 5.4 oz (154 grams)Memory 40,000 Readings of Level and Temperature 32,000 Readings of Level and Temperature Superior Reliability EEPROM Memory with Superior Reliability EEPROM Memory with redundant backup of last 1200 logs redundant backup of last 1200 logsBarometric Compensation High accuracy, air-only, Barologger Gold Use Barologger Gold

Models Resolution Accuracy (typical) Water Fluctuation RangeBarologger 0.002% FS ± 0.003 ft., 0.1 cm Air OnlyF15, M5 0.001% FS ± 0.010 ft., 0.3 cm 13.1 ft., 4 mF30, M10 0.0006% FS ± 0.016 ft., 0.5 cm 29.5 ft., 9 mF60, M20 0.0006% FS ± 0.032 ft., 1 cm 62.3 ft., 19 mF100, M30 0.0006% FS ± 0.064 ft., 1.5 cm 95.1 ft., 29 mF300, M100 0.0006% FS ± 0.164 ft., 5 cm 325 ft., 99 m

Applications• Pump and slug tests• Reservoir and stormwater runoff management• Watershed and drainage basin monitoring• Stream gauging, lake and wetland monitoring• Tank level measurement• Monitoring water levels in wells and surface water

Cat. No. Description PriceSO108081-0 LT Levelogger Gold, Model 3001, M10/F30 $ 625.00SO108086-0 LT Levelogger Gold, Model 3001, M30/F100 $ 625.00SO108858-0 LT Levelogger Junior, Model 3001, M5/F15 $ 410.00SO108860-0 LT Levelogger Junior, Model 3001, M10/F30 $ 410.00SO108079-0 LT Barologger Gold, Model 3001 M1.5/F5 $ 510.00


Groundwater and Surface Monitoring Instruments

151 800.463.4363

Wa

te

r

RainloggerModel 3002

The Rainlogger is a data logger designed to count the tips of a standard tipping-bucket rain gauge with a reed switch output.

Compact and waterproof, this durable field unit offers long-term reliability with a battery that lasts up to 10 years.

The rainfall level per user-defined sampling period, and a five-minute maximum rainfall are logged in non-volatile memory, which holds up to 40,000 sets of readings.

Linear sampling can be set from 5 minutes to 99 hours.

Applications• Measuring local precipitation• Determining peak rainfall events• Stormwater management• Remote monitoring of watersheds• Ideal for correlating precipitation events to: - Groundwater and surface water data - Watershed and drainage basin studies - Agricultural and forestry studies

SpecificationsOperating Temperature -20°C to 80°CMaximum # Readings 40,000 sets of readingsMemory Non-volatile EEPROM, FRAM back-upCommunication Optical infra-red to RS232 or USBSampling Mode LinearSampling Rate 5 minutes to 99 hoursSize 7/8” x 7” (22 mm x 175 mm)Weight 4.8 oz (135 grams)

Cat. No. Description PriceSO108744-0 3002 Rainlogger c/w connection cable $ 455.00

Integra Bladder Pump Model 407

The Solinst Integra® Bladder Pump allows consistent, high quality samples in all types of applications. It offers excellent performance and reliability.

With Integra Bladder Pumps there is the assurance that there is no air/water contact during sampling. It meets the most rigorous US EPA standards for VOC groundwater monitoring. Excellent for either regular flow or low flow sampling, the stainless steel pumps can lift from depths up to 500 ft (150 m) below grade. The PVC Integra operates up to 100 ft (30 m) below grade.

Features• Stainless Steel or Low Cost PVC: 1.66” Ø (42 mm) and 1” Ø (25 mm) in 316 stainless steel. 1.66” Ø (42 mm) in PVC.• Non-Vertical Applications: Pumps operate effectively at almost any angle and can be placed under landfills, tailings, storage tanks or contaminant plumes.• Zero-Submergence Capability: Pumps can sample from low yield wells and allow complete emptying of the well.• Leachate/Product Pumping: Pneumatic drive pumps are well suited for pumping contaminant liquids. Strong solvents and corrosive chemicals can be easily and economically pumped.• Survives Dry Pumping, Dirty Air and Sand: Integra bladders are not damaged by operation in sediment laden water, or in dry pumping conditions.

Cat. No. Description PriceSO103868-0 PVC Bladder Pump, Model 407 $ 285.00SO106138-0 S.S. Bladder Pump, Model 407 $ 610.00


Wa

te

r Standpipe PiezometersModel 601

ApplicationsWater level monitoringPermeability measurementsConstruction controlDe-watering and drainage operationsSlope stability investigationsAir Sparging: a 1 ft. Piezometer has 18 x 3/8” diameterholes i.e. 2 sq inches/ft.Metals Sampling

AdvantagesReliableLow cost60 micron filter elementRigid PVC housing protects Vyon filter installation

Cat. No. Description PriceSO100396-0 PVC Standpipe Piezometer, $ 30.00 Model 601, 1ft length

Peristaltic PumpModel 410

Designed for field use, the reversible flow Peristaltic Pump from Solinstis ideal for vapor sampling or water sampling from shallow wells andsurface water. It can be used for vacuum pumping and for pressure deliv-ery of liquids or gases. Compact and lightweight, the Peristaltic Pump has no vents, grates or openings. This makes it water resistant, easy to use in the field and easy to maintain and repair. The metal case is extremely robust and water resistant. A handle and one easyaccess control on the top of the pump make it perfect for fieldwork. The pump measures 13” x 5” x 6-1/2” (33 cm x 13 cm x 17 cm) and weighs only 8 lbs (3.6 Kg).

Applications• Groundwater sampling from shallow wells • Vapor sampling• Surface water sampling • Drive-Point profilers• Back flushing Solinst Drive-Point Profilers

Cat. No. Description PriceSO108592-0 Peristaltic pump, Model 410 $ 1095.00

Waterra Disposable Bailers

Strong and heavy-duty, made of clear PVC

Cat. No. Capacity Ext. Dia. Length PriceWABAIL-0.5 80 ml 0.5 in. 37 in. $ 9.95WABAIL-1.5 11 ml 1.5 in. 37 in. $ 8.00

Tubing 5/8 x 1/2 in HDPE • Length of 100 feet

Cat. No. Description PriceWA58HDPE10 Tubing 5/8 x 1/2 in HDPE, 100 ft $ 29.00

Waterra Inertial Foot Valve Pump • Ideal for 2 in. diameter wells• Pumps up to 150 feet

Cat. No. Description PriceWAD25-0000 Standard flow, 1 in. OD $ 6.00WAD32-0000 High flow, 1.25 in. OD $ 20.00

Waterra Pump Hydrolift II• Execute your work faster and effortlessly!• Electrical stirrer for Waterra foot valve pump• Motorized via 110V, 3/4 HP motor• Generates a 4-in. course up to 200 cycles/minute• Also available in gasoline version

Cat. No. Description PriceWAWHLPII-0 Pump Model Hydrolift II $ 2775.00

171 800.463.4363

Wa

te

r

Waterra Inline Disposable 0.45 μm • Excellent particle retention!• Can be used with foot valve pumps or Waterra bailers

Cat. No. Description PriceWAFHT45-00 Inline disposable 0.45 micron filter $ 19.75

Standard PerformanceSubmersible Pumps Waterra has the complete line of 12 volt environmental sampling pumps. The most popular seg-ment of this line is the Stan-dard Performance Pumps. These pumps offer simplicity, performance and low cost.

Features• Can operate under harsh conditions and higher turbidity• Runs continuously in water without the need for a cool down• Sleek exterior minimizes well hang-ups• Reliable design is suitable for continuous sampling and purging of groundwater wells• Very reliable and economical• 400 hour motor life• 1.82” diameter

Cat. No. Description PriceWAWSP12V2M Standard Performance Pump, cable 50 ft $ 145.00WAWSP12V2- Standard Performance Pump, cable 60 ft $ 230.00WAWSP12V3- Standard Performance Pump, cable 70 ft $ 250.00WAWSP12V4- Standard Performance Pump, cable 80 ft $ 310.00WAWSP12V5- Standard Performance Pump, cable 90 ft $ 450.00

Portable Vacuum Fluid Sampler

Model VST

The VST can be used for a wide range of sampling needs form heavy influent to critical storm water or combined sewer overflow sites. It is ideal for liquids containing hard organic matter which pass harmlessly through the sample tract and into the sample bottle. The VST is available with both 3/8” and 5/8” intact sample bottles are available. Durable APS construction allows the unit to with-stand corrosive environments and adverse weather conditions.

Cat. No. Description PriceMAVST3-000 3/8 in. ID Vacuum Pump Portable Contact us Sampler System for configurations (Requires 3/8 in. sampling hose) MAVST5-000 5/8 in. ID Vacuum Pump Portable Contact us Sampler System for configurations (Requires 5/8 in. sampling hose)

Refrigerated version available

Low cost Process Meter Sabre SeriesModel PD603 SpecificationsExcept where noted all specifications apply to operation at +25°C.

GeneralDisplay 0.56” (14.2 mm) Red LED, 4 digits (-1999 to 9999)Power Options 85-265 VAC, 50/60 Hz; 90-265 VDC, 20 W max or 12-36 VDC; 12-24 VAC, 6 W maxRequired Fuse UL Recognized, 5 A max, slow-blow; up to 6 meters may share one fuseNormal Mode Rejection 64 dB at 50/60 HzIsolation 4 kV input/output-to-power line; 500 V input-to-24 VDC supplyOperating Temperature 0 to 65°CStorage Temperature -40 to 85°CRelative Humidity 0 to 90%

Cat. No. Description PricePD6036R000 Process Meter $ 220.00PD6036R010 Process Meter with 24 V transmitter supply $ 280.00


Wa

te

r High Accuracy Submersible Water Level Transmitter Model WL450

SpecificationsAccuracy Total Error Band ±0.25% standard (optional: ±0.1%)Operating Temp -10 to 80ºC / 0 to 80ºCPower Supply 10 – 28 VDCOutput 4 – 20 mA, 2-Wire loop powered (optional volt outputs)Wetted Materials 316L Stainless steel, polyamide, fluorocarbonCable Hytrel-jacketed, vented & shieldedDimensions 0.825” (21mm) diameter x 3-3/4” (95mm) long

Cat. No. Description PriceGLWL450003 Water Level Transmitter $ 895.00 Range: 0 to 3 ft, Cable length: 25 ftGLWL450030 Water Level Transmitter, 0-30 ft $ 965.00 Range: 0 to 30 Ft, Cable length: 40 Ft

Pressure TransducersSubmersible Depth Transmitter II

SpecificationsPower 12.5 - 35 VDCOutput 4-20 mA current signal, linearly corresponding to rangeOperating temperature +1 to 50° C (33 to 122° F)Note: SDT-II should not be subjected to freezing water conditions

Media Any media compatible with 316 stainless steel, PVC, nylon, and polyurethaneAccuracy Linearity: 1 %, typically .25 % of full scaleZero 4.0 ± 0.2 mA at 22° CSpan 20.0 ± 0.5 mA at 22° CThermal Zero Drift Typical 0.1 % of Span per degree Celsius

Cat. No. Description PriceLS45551-00 Submersible Depth Transmitter $ 1065.00

Open Channel / Sewer Flowmeter and SensorsModel PCMF

TransmitterPower supply • Rechargeable battery: 12 V / 12 Ah, lead gel • Battery box: for 12 standard batteries 1,5 V (Type LR20) • Power unit: 100 - 240 V AC; 50/60 HzEnclosure • Material: Polypropylene, impact resistant • Weight: approx. 2.0 kg (without sensor and battery) • Protection: IP67 if cover is closed and lockedOperation -20 °C to +50 °CTemperatureStorage -30 °C to +70 °CTemperature Max. Humidity 90 %, Non-condensing

SensorsFlow Velocity MeasurementMeasurement Range -600 cm/s to +600 cm/sZero Point Drift absolutely stable zero pointSonic Lobe ±5 degreesTemperature MeasurementMeasurement Range -20° C to +60° CMeasurement Error ±0.5 KLevel Measurement - PressureMeasurement Range 0 to 350 cmZero Point Drift max. 0.75 % of final value (0 - 50° C)Measurement Error (standing medium) <0.5 % of final value

Cat. No. Description PriceNIPCFKDA-0 Portable Flow Measurement Transmitter $ 4150.00 Type PCM FNIPKDAKP100 Ultrasonic Compact Doppler Sensor $ 5750.00

191 800.463.4363

Wa

te

r

Magnetic Flow MetersModel WMX101

SpecificationsPipe Sizes 4”, 6”, 8”, 10”Flow Range 4” 12-500 GPM 6” 32-1200 GPM 8” 60-2200 GPM 10” 95-3500 GPMFlanges AWWA 150 lb. DrillingPressure 150 PSI Working pressureTemperature Range 10º F to 130º F (-12º C to 55º C)Accuracy +1% at 100% to 10% of reading +2% at 10% of reading to cut offMaterials Body: Welded steel, epoxy powder coated Liner: HDPE Electronics Housing: Die cast aluminum, powder coated Electrodes: 316 stainless steelRate Display 6-Digits in units of GPM (standard), MGD, Liters/minute, CFMTotalizer Display 8-Digits in units of Gallons x 1000, CU Feet, CU Meters, MegalitersPower WMX101: 12-24 VDC, 30 mA WMX104: 2 Lithium 3.6V “D” batteries, replaceable, 3 year lifeOutput Signal Current sinking pulse, opto-isolated, 24 VDC, 10 mA maxEmpty Pipe Hardware/software, conductivity-basedDetection Environmental NEMA 4X standard, (Optional short-term immersible)

Magnetic Flow Meters*

* Standard units are US gallons. Please specify other units when placing order: mgd, cfm, or lpm.

Cat. No. Description PriceGLWMX10440 4” Magnetic Flow Meter, Battery $ 2195.00GLWMX10480 8” Magnetic Flow Meter, Battery $ 2695.00

*External power also available.

Ultrasonic Flow MetersModel FM500

SpecificationsMeasuring Principle Ultrasonic Doppler or transit time via pipe mounted transducersCondition of Flow Full pipe within the minimum and maximum velocity specificationsLiquid Types Virtually any acoustically conductive fluidTransit Time Mode From 0% to 1% (0 to 10,000 ppm) particulateDoppler Mode From 0.02% to 15% (200 to 150,000 ppm) of 100 micron particulateNominal Pipe Sizes 0.5 inch - 12.0 inch (20mm to 315mm)Pipe Materials Most metal and plastic pipesLiquid Velocity Range 0 to 30 f/s (0 to 9 m/s)

Accuracy at Pipe Inside DiameterFlow Rate Averaging Time (5.0s): +1% of rate >8 ft/s and +0.06 ft/s <8 ft/s (Transit time 1/2” to 1”)

+1% of rate >1 ft/s and +0.01 ft/s <1 ft/s (Transit time 1-1/4” to 12”)

Flow Rate Averaging Time (1.0s): +1% of rate >12 ft/s and +0.12 ft/s <12 ft/s (Transit time 1/2” to 1”)


Flow Rate Averaging Time (0.5s): +2% of rate >12 ft/s and +0.25 ft/s <12 ft/s (Transit time 1/2” to 1”)


Options• 3-Relay option (for control and alarms)• Smart communications/configuration package• 50 FT Transducer cable (for 2 transducers)

Cat. No. Description PriceGLFM500-00 Doppler Flowmeter with $ 4265.00 Datalogger & 10 FT cable


Wa

te

r Sonic Water Level Meter Model WL650

SpecificationsMeasurement Range Normal 10-500 ft (3-152 m), Deep 200-1200 ft (61-366 m)Display Resolution 0.1 ftMeasurement Accuracy +0.2 ft (0.5 cm) For water level less than 100 ft (30.5 m), +0.2% of reading greater than 100 ft (30.5 m)*Operating Temperature 30 to 140° F (-1 to 60° C)Power 8 AA Dry cell batteriesDimensions (LxHxW) (Excluding sonic measuring duct) 7x4x5 in (18x10x13 cm)Sonic Measuring 5/8 in (16mm)The hole diameter must be Duct Diameter at least large enough for 1/2 inch pipe threadSonic Measuring 2 in (5 cm)Duct LengthWeight 3 1/2 lbs. (1.5 kg)

Cat. No. Description PriceGLWL650-00 Sonic Water Level Meter, Model WL650 $ 1685.00

Mechanical Flowmeters Model 2030

The model 2030 Series Digital, Mechanical Flowmeter is a compact, general purpose instrument for flow measurements in rivers, estuaries, canals, sewage outfalls, and offshore applications. It is ideal for deter-mining water speed, volume, or distance.

Features• Corrosion-Free Operation• Ballasted for dynamic in situ stability• Unlimited depth capability

SpecificationsOverall Length 21.3 cm (8 3/8”)Standard Rotor Diameter 6.98 cm (2 3/4”)Low-speed Rotor Diameter 16.5 cm (6 1/2”)

Cat. No. Description PriceGO2030R-00- Flowmeter with Standard Impeller $ 575.00 6 digit counter

Paddlewheel Flow MetersModel F1000

SpecificationsAccuracy ±2% full scaleDisplay 6-digit LCD, rate and totalMaximum Pressure 300 psig (20.7 bar) @ 70ºF (20.7ºC)Maximum Fluid T-mount: 200ºF (93ºC)Temperature @ Saddle-mount: 140ºF (60ºC)0 psiMaterials Sensor body/paddle/axle: PVDF Mounting T: Polypropylene Mounting saddle: 1-1/2” to 3”: PVDF, 6” to 10”: PVC O-Rings: Viton(R)Power Two AAA batteries (included)Enclosure NEMA 4X, ABSWeight 2 lbs (907 kg)

Cat. No. Description PriceGLRT200MI2 Pipe Size 2”, Flow Range 6 to 60 GPM $ 765.00GLRT200MI3 Pipe Size 2”, Flow Range 10 to 100 GPM $ 765.00GLRT500MI1 Pipe Size 1/2”, Flow Range 2 to 20 GPM $ 670.00GLRT500MI2 Pipe Size 1/2”, Flow Range 0.5 to 5 GPM $ 670.00GLRT750MIG Pipe Size 3/4”, Flow Range 3 to 30 GPM $ 670.00

Price Type AA Current Meter Model 622DF2N

• Measures hydrological velocity in pipelines or rivers• Version with wading rods and digital meter model 1100• Reading: 0 to 7.6m/sec.• Accuracy: ±2%• Several configurations available, namely the Pygmy model for low velocities.• Supplied with a visual display model 1100 (metric), Price type meter, 4 sections of 2m rods, 8 clips to hold cable to the rod, fasteners and canvas carrying bag.

Cat. No. Description PriceGU622DF2N- Wading Rod Outfit with Model 1100 $ 3430.00 Digital Flow Indicator, metric

211 800.463.4363

Wa

te

r

Open Stream Current Velocity Meter Model 2100-STDX

• Measures current velocity from 0.03m up to 7.5m/sec.• Accuracy: ±1%• Digital display• Fiber optic sensor• Power: 9V battery• The kit includes a telescopic rod from 2.5 to 9.5 feet, depth probe, display model 2100, one harness and 2 propellers• Several other models available Mechanical Flowmeter Model 2030R• Used to measure the water flow of rivers, estuaries, channels, sewer outputs or the effort of a fishing net• Current velocity: 10cm/sec. to 7.9m/sec.• 6 digit counter (odometer style) measuring 999,999 counts• Towing rings

Cat. No. Description PriceSW2100STDX Open Stream Current $ 2345.00 Velocity Meter

Flow Probe Model FP101

• For open channels and partially filled pipes• Range: 0.1 to 8m/sec. on LCD display• Sensor: rotor with electromagnetic signal• Accuracy: 0.03m/sec.• Length: 3 to 6 feet• Supplied with rigid carrying case

Cat. No. Description PriceGLFP101-00 Flow Probe 3 to 6 ft. telescopic handle $ 995.00GLFP201-00 Flow Probe 5 to 15 ft. telescopic handle $ 1095.00

Volumetric Weirs To determine the flow of newly installed sewer lines, or measure substantial flows in existing lines. “V” notch weir can measure flows from 57 to 3,700 gallons per hour.

Cat. No. Description PriceTHEL06-000 Diameter 6 in, capacity 46 000 gallons/day $ 245.00THEL08-000 Diameter 8 in, capacity 124 000 gallons/day $ 330.00THEL10-000 Diameter 10 in, capacity 234 000 gallons/day $ 355.00THEL12-000 Diameter 12 in, capacity 361 000 gallons/day $ 385.00

Palmer Bowlus FlumesThe Palmer Bowlus metering flume has been widely used since 1937 for measuring water and wastewater in open channels or pipelines that are not under pressure. Some of its most important characteristics include measure-ment accuracy, low head loss, minimum flow restriction and ease of installation in pipelines.

AccuracyThe accuracy of the Palmer Bowlus flumes is comparable to that of Parshall or other types of Venturi flumes. Experiments indicate that within the normal range of flows (from under 10% to 90% of flume capacity), measurement accuracy is usually within +/- 3% of flow rate.

Options• Wide variety of instrument accessories• Sectional designs for limited access• 2D & 4D Channel options • Channel inserts• Stilling wells • Staff gauges

Cat. No. Description PriceEFPALBOW30 Palmer-Bowlus flume 30” On request

Portable Sludge Level Detector Model 10 Sludge Gun

• Measures the thickness of the sludge layers in your reservoirs and tanks.• Rugged and easy to use• High intensity infrared beam operation• Sensitivity control (thick or thin sludge layers)• Audible alarm• 10m graduated cable• Operating temperature: -20 to +50°C• Usable in the rain or snow• Power: 6 Alkaline mini-cells

Cat. No. Description PriceMASLUDGE10 Portable Sludge Level Detector, $ 1195.00 Model 10 Sludge Gun



Wa

te

r Fuel Sampler

For sampling ethanol and ethanol-blended fuels, the Fuel Sampler is effi-cient and easy to use. It is made up of three 5 ft. (1.53 m) sections of clear PVC that screw together to make a 15 ft. (4.60 m) length. As the sampler is lowered into the fuel tank, the float valve at the bottom opens, allowing the fuel up into the tube. When the bottom of the tank is reached, simply raise the sampler up to close the valve and hold the sample inside, showing a core section of the fuel. To empty, press the tip of the valve against the side of the tank and the contents will flow out. Clean the sampler with mild soapy water using the Cleaning Brush (NAB01291WA) or the Cleaning Rod (NAB01412WA) and Cloth Strips (NAB01413WA).

Cat. No. Description PriceNAB01477WA Fuel Sampler $ 125.00NAB01291WA 1.83 m/6 ft Cleaning Brush for Sludge Judge $ 25.00NAB01412WA Cleaning Rod for Sludge Judge $ 25.00 and Grease Trap Sampler NAB01413WA Cotton Cleaning Strips, 5 x 30.5 cm/2 x 12”, $ 20.00 Package of 50

Swing Sampler When collecting a sample from a hori-zontal flowing stream, such as a sewer, the Swing Sampler is specially designed for this application

• The end of the sampler swings, allowing collection from different angles, including 90°.• The 6-ft., 1.83 m fiberglass pole extends to 12 ft., 3.66 m and 8-ft., 2.44 m pole extends to 24 ft., 7.32 m providing a long length for any sampling situation.• Unit comes with a 960 ml polyethylene bottle and the cover has a vinyl liner for leak-proof protection. The bottle is attached to a polyurethane holder and is held in place with a plastic snapper ring that has an adjustable locking device. Other types of bottles may be used but a different type of fastener may be required to hold the bottle in place.

Cat. No. Description PriceNAB01310WA 12-ft., 3.66 m Swing Sampler $ 163.00NAB01366WA 24-ft., 7.32 m Swing Sampler $ 190.00

Sludge Judge • The Sludge Judge is the ideal tool for sampling settled solids in a variety of liquids (non caustic) and at any depth.• Applications: Food and chemical plants, wastewater treatment plants, etc.• The unit holds approximately 3 oz/foot

Cat. No. Description PriceNAC09247WA 15-ft. Sludge Judge, 3 sections of 5-ft. $ 104.00NAB01355WA Sludge Judge II, 3 sections of 5-ft. $ 165.00 Holds 6 oz/footNAC09249WA Carrying case $ 51.50NAB01291WA 6-ft. Cleaning brush $ 25.00

Sludge Judge Ultra - Super Strong

• The Sludge Judge is the ideal tool for sampling settled solids in a variety of liquids (non caustic) and at any depth• Applications: food and chemical plants, wastewater treatments plants, etc.• The unit holds approximately 3 oz/foot

Cat. No. Description PriceNAB01386WA Sludge Judge Ultra. 1.9 cm $ 155.00NAB01376WA 5 ft., 1.53 m. Top Section $ 50.00NAB01388WA 5 ft., 1.53 m. Extension Section $ 50.00NAB01389WA 5 ft., 1.53 m. Bottom Section $ 65.00

Battery BackPack Electro-FisherModel HT-2000

The HT-2000 meets and exceeds all aspects of the Electrofishing Guidelines. Battery and electrical circuits are contained in a hermetically sealed, rugged waterproof case, integrated on our non-conductive and comfortable pack frame.

SpecificationsConductivity Range 10 -1500 Microsiemens/cmBattery 24 Volt gell type (12V + 12V)Output Voltage 50 - 950 V in 11 steps (50, 100, 150, 250, 350, 450, 550, 650, 750, 950V)Output Power 2kW (2000W) 2ms PulsedOutput Frequency 5 - 250 Hz in 11 Steps (5, 10, 20, 40, 60, 80, 100, 130, 160, 200, 250 Hz)Weight Approximately 29 lbs.Overload Protection Automatic Electronic, and 30A safety fuseElectrodes Telescoping anode pole (fits into field box), Stainless Steel trailing CathodeTimer 6 Digit crystal controlled second counter

Cat. No. Description PriceHEHT2000-0 Battery Backpack Electro-Fisher Kit $ 8270.00

231 800.463.4363

Wa

te

r

Wildco Petite Ponar Grab

• Lighter by half than standard Ponar®

• Designed for hand line operation• Removable top screens• Self-releasing pinch-pinTM, heavy duty hinges• Extra weights available for more penetration• Center pivot for low bottom disturbance

This scaled-down sampler gives a whole new meaning to the word “pe-tite.” We mean it can be easily carried by one person in one hand. You may still need good muscle mass, but, since it weighs under 25 pounds, you can use it on a line without the winch and crane recommended for the larger version. Same design as the standard Ponar® with stainless-steel construction. Uses 3/16” + line or 61-B14 cable.Available with or without case.

Materials 316 Stainless steel and/or plated steelFasteners, Screen 18-8 Stainless steelWeight and Volume 11 kg (24 lb) Weight; 2,4 Liter volumeTotal Weight 14 kg (30 lb)Sample Area 152 x 152 mm (6 x 6 in)Mesh on Screen 500 μm

Cat. No. Description PriceWI1728G30- 6 x 6 in, Stainless steel scoops only $ 1008.00WI1728G40- 6 x 6 in, All stainless steel construction $ 1168.00WI910G26-0 Plastic carry case $ 165.00

Vertical Alpha Bottle Larger bottles are especially good for collecting small plankton. The wide mouth collects a true water sample with no contamination from other water levels. During descent, the open mouth does not restrict water flow. This makes them particularly suitable for collecting plankton, floating sediments and for use where metallic ion avoidance is desirable. Your choice of transparent acrylic or more durable opaque PVC.

• Wide open mouth does not restrict water flow• Ideal for collecting microzooplankton• Choose clear acrylic or durable PVC

Cat. No. Description PriceWI1120C42- Alpha Water Sampler, Vertical Acrylic Kit $ 725.00 The Kits include: WI45B10-00 Messenger, 100’ (WI62C15-00) line and carry case.

Ekman Dredge • To sample sea, lake and river bottom• Stainless steel construction • Rugged, heavy-duty and lightweight• Dimensions: 6 x 6 x 6 inches • Volume: 3.5L• Supplied with messenger, one 100-ft. cable and a carrying case

Cat. No. Description PriceWI196B12-00 Standard 6 x 6 x 6 in Ekman Grab Kit $ 775.00

Secchi Disk Measure the turbidity or degree of visibility of the water you are testing with this weighted 20mm diameter Secchi disk. The kit includes the (black and white) disk and a 20m graduated cable.

Cat. No. Description PriceLAM0171CL- Disk w/ black & white quadrants & calibrated line $ 69.00

Alpha Horizontal Water Sampler• Made of transparent acrylic• Capacity: 2.2L• Length: 17-5/8 x 4-1/2 inches diameter• The kit includes the bottle, one messenger, one 100-ft. cable and one carrying case

Cat. No. Description PriceWI1120G42- Alpha Water Sampler, Horizontal Acrylic Kit, 2.2L $ 695.00

1500 Kemmerer Bottle This series of Kemmerer bottles has no metal parts to contact your sample. Delrin fasteners and an O ring replace the stainless steel garter spring in the All-Angle™ trip head. The bottle body can be either transparent acrylic, which allows you to view your sample before removal, or opaque PVC for greater durability. The all-plastic center shaft is made of plastic CPVC with a plastic delrin nut on its bottom.

• No metal parts to touch your sample• Silicone seals for trace metal sampling• Polyurethane seals for general sampling• Clear acrylic or opaque PVC bottle body• All plastic construction• PVC center shaft

Cat. No. Description PriceWI1520A45- Kemmerer Water Sampler, Trace, Acrylic, Kit $ 695.00The kits include: WI45B10-00 Messenger, (WI62C15-00) line and carry case.



Wa

te

r Niskin Water SamplerModel 1010

Specifications

Mounting: Cable clamps on 1.2 to 12-liter bottles are for cable diam-eters up to and including 6.4mm (1/4”). Clamps on larger bottles are for diameters up to and including 8.0mm (5/16”).

Material: Non-metallic construction of PVC tube section, and end stop-pers, handles and cable clamp blocks (aluminum on 30-liter bottle). Delrin stopcocks, air vent screw and push rod. Stainless steel cable clamps. End stopper closure band of latex tubing. Buna-N O-ring seals ( other materials available). Nylon monofilament lanyards.

End Closure: Stopper with spherical section sealing surface held firmly against O-ring seal by internal latex tubing. Drainage: Thumbscrew air vent at top. Stopcock at base: 4.7mm (.187”) diameter except for 20- and 30-liter bottles, which have a second, larger basal stopcock (9.52mm, .375”) for rapid drainage.

Cat. No. Description PriceGO101005-0 Niskin Water Sampler, 5L $ 910.00 GO101030-0 Niskin Water Sampler, 30L $ 1720.00

Hydrant Flow Gauge (Swivel Diffuser)

Features

• Makes Your Job Quicker & Easier• Swivels to Aim Flow• Diffuses Flow to Reduce Damage• Performs Flow Tests• Flow Chart

Ruggedly constructed to provide years of dependable service, the Swivel Diffuser has a replaceable pressure tube assembly and a ball-bearing swivel hydrant adapter. Special threads available on request (sample of male nozzles required).

Cat. No. Description PriceJPP6750110C Swivel Diffuser 2 1/2”. CST $ 590.00 (Canadian Standard Threads), 100 lb. Liquid Filled JPP675016C Swivel Diffuser 2 1/2”. CST $ 590.00 (Canadian Standard Threads), 160 lb. Liquid Filled P66904LF 4” Liquid filled gauge $ 89.00 (0-100lb./1680 GPM) (For 2 1/2” Only)

P66916LF 4” Liquid filled gauge $ 89.00 (0-160lb./2120 GPM) (For 2 1/2” Only)

Aquatic Viewing ScopesAqua-Scope Series

The Aqua Scope II Viewing ScopeThe Aqua Scope II™ Viewing Scope is used for vernal pool surveys, Secchi disk readings, and aquatic plant studies and animal observa-tions (macro invertebrates, mollusks, aquatic salamanders and others). The innovative design, with its tilted lens, eliminates both surface glare as well as internal reflection. This feature allows for consistent viewing parameters regardless of environmental conditions.

Aqua Scope VI Viewing ScopeThe Aqua Scope VI offers the viewer 2.25 times more viewing area than the 4 inch viewing scope. The 6 inch diameter is ideal for surveying aquatic invasive vegetation such as water chestnut, Eurasian watermil-foil, hydrilla and others.

View Bucket (Aqua Explorer View Bucket)This aquatic view bucket is made of a rugged 5 gallon bucket with the lid containing an acrylic lens, which yields a 9¼ inch viewing area. The lens is recessed in the lid to provide protection from abrasion when the bucket is set down. The acrylic lens is replaceable. The black interior cuts down on the internal reflection.

Cat. No. Description PriceWMAS6-0000 Aqua Scope VI Viewing Scope $ 210.00 WMAS2-0000 Aqua Scope II Viewing Scope $ 115.00WMVB-00000 Aqua Explorer Viewing Bucket $ 140.00

Staff Gauge • Porcelain finish• Available in 1m length• Used to measure water levels of rivers, dams and spring floods• Attachment rings make it easy to install

Cat. No. Description PriceHY9000-000 Staff Gauge $ 63.00HY9000X-00 Number plates (0 to 9) $ 11.00

251 800.463.4363

We

at

he

r

Vantage Pro2 Weather Stations

Choose The Wireless Model for:• Easiest installation• Ability to add additional consoles or special-purpose stations• Reduced risk of damage for lightning strikes

Choose The Cabled Model for:• Most economical installation• Field installation using our Complete System Shelter

All Vantage Pro2 Stations include• Console with AC-power adapter. Wireless console may also be run using three C batteries. Batteries should also be added to cabled console for backup during power outages• Integrated sensor suite with rain collector, temperature and humidity sensors, and anemometer• 40’ (12m) anemometer cable• Mounting hardware

Cat. No. Description PriceDA6152-000 Wireless Vantage Pro2 $ 695.00DA6152C-00 Cabled Vantage Pro2 $ 595.00 DA6153-000 Wireless Vantage Pro2 $ 1065.00 with 24 hour Fan-Aspirated Shield

WeatherLink® for Vantage Pro® and Vantage Pro2™

WeatherLink® for Vantage Pro® and Vantage Pro2™ consists of our WeatherLink software and a specialized data logger that connects to a Vantage Pro or Vantage Pro2 console or Weather Envoy to an ethernet connection. The software and data logger transfers your Vantage Pro or Vantage Pro2 weather data to your computer, allowing you to create a permanent weather database.

Vantage Pro2 Plus Weather Stations

Stations include:• Vantage Pro2 features • Solar radiation sensor• UV radiation sensor • Sensor mounting shelf

Cabled Stations also include:• 100’ (30 m) cable from console to integrated sensor suite

Wireless Stations also include:• Transmitter (in weather-resistant shelter) and receiver (in console) Range is up to 1000’ (300 m) outdoors, line of sight. Typical range through walls under most conditions is 200’ to 400’ (60 to 120 m)• Ability to receive data from more than one transmitter• Ability to retransmit from one console/receiver (or wireless Weather Envoy) to another, so you can view the same weather data in more than one location

Vantage Pro2 Plus:Includes all features of the Vantage Pro, plus everything you need for reading:• UV index and dose • Solar radiation • Evapotranspiration*UV and solar radiation sensors are pre-installed on the sensor mounting shelf

Cat. No. Description PriceDA6162-000 Wireless Vantage Pro2 Plus $ 1195.00DA6162C-00 Cabled Vantage Pro2 Plus $ 1095.00DA6163-000 Wireless Vantage Pro2 Plus $ 1295.00 with 24 hour Fan-Aspirated Shield

Once stored in the database, your weather information can be used to generate a wide variety of reports and graphical displays, and can also be shared via the internet. WeatherLink is packaged with one of the following data loggers :

Cat. No. Description PriceDA6510USB- WeatherLink for Vantage Pro $ 225.00 and Vantage Pro2, Windows, USBDA6510SER- WeatherLink for Vantage Pro $ 225.00 and Vantage Pro2, Windows, Serial Port


We

at

he

r Portable Tripod Model 905

The model 905 Tripod is a light weight col-lapsible tripod designed for rapid deployment and retrieval. It can be easily transported and erected by a single person. It is intended to sup-port a complement of weather or atmospheric instrumentation weighing up to 15 pounds in winds up to 90 mph, when correctly anchored.

SpecificationsSensor Mount 1 Inch diameter 25.4mm; 3/4 Inch IPSShipping Dim 8” x 8” x 52”; (20.3cm x 20.3cm x 132 cm)Tripod Weight 16 lbs 7.3 KgShipping Weight 20 lbs 9.1 Kg

Cat. No. Description PriceMET905-00 Portable Tripod $ 695.00

Fold-Over Towers MF-1300 Series Specifications Weight per Section 30 lbs.Tower Height 30 feetMast Length over Tower 3 feetFold-Over Hinge Height 10 feetTower Side Width 12 3/4”Length of Each Section 10 feetHardware 18-8 StainlessMaximum Allowable Vertical 8750 lbs.Load on 1 Side-Rail LegTotal Shipping Weight 300 lbs.Meets AASHTO Building CodesConcrete Base Width 36”Concrete Base Depth 45”or Below Frost Line Cubic Yards Concrete 1.25

Cat. No. Description PriceGLMF1330-0 30’ Fold-Over with level base $ 4545.00

10 Meter Freestanding Aluminum Tower Model M-4000

This tower made of 3 sections of 3 meters each is easy to install on a concrete base and is very light. It is ideal to install meteorological sensors. It also includes a mounting base and one 3 meter mast. Roof mounting model also available.

Cat. No. Description PriceUN430-0000 Freestanding Aluminum Tower, 10m $ 1150.00

Wind Monitor Model 05103 This wind indicator is a very rugged and high performance wind sensor. The wind speed sensor is a four blade propeller. The wind direction sensor is a rugged and lightweight fin with an aerodynamic profile permitting adequate description of wind variations. The instrument is made of UV stabilized plastic with stainless steel and anodized aluminum fittings. For offshore and marine applica-tions, the Wind Monitor model 05106, offers comple-mentary characteristics such as sealed and greased bearings.

RangeSpeed (wind) 0-60 m/sGust survival 100 m/sAzimuth 360° mechanical, 355° electrial (5° open)

AccuracySpeed (wind) ±0.3 m/s Direction (wind) ±3 degree

GeneralPower requirement Potentiometer excitation 15 VDC max.Signal output 0-1 VDC, 0-5 VDC or 4-20

Cat. No. Description PriceRMY05103-0 Wind monitor $ 1010.00RMY05103V- Wind monitor 0-1 VDC outputs $ 1425.00RMY05103L- Wind monitor 4-20 mA outputs $ 1435.00RMY05106-0 Wind monitor-mA (Marine model) $ 1785.00RMY05106-0 Wind monitor Alpine $ 1495.00RMY05603B- Wind sensor interface 0-1 VDC $ 620.00 (for use with RMY05106-0)RMY05631B- Wind line driver $ 690.00 (for use with RMY05106-0) 4-20 mA

Digital BarometerModel PTB210

Excellent solution for outdoor installa-tions. Operates in a wide temperature range. The housing provides IP65 (NEMA4) compliant protection against sprayed water.

Features • 500 to 1100 hPa or 50 to 1100 hPa pressure ranges with serial output• Different scalings between 500 to 1100 hPa with analog output• Electronics housing IP65 protected against sprayed water• Accurate and stable measurement• NIST traceable (certificate included)

Cat. No. Description PriceVAPTB210B1 Digital Barometer, Class B, 500 - 1100hPa On request

271 800.463.4363

We

at

he

r

WindTracker Wind Display Model 06201

Connects with The Wind Monitor Model 05103 (See on page 26)The WindTracker wind speed and direction indicator offers great performance in a compact display. Wind speed is displayed in your choice of units: knots, mph, km/h, m/s. Wind direction indication is clearly displayed on a LED compass pattern. Multicoloured segments give a quick visual indication of current direction and variability.

Wind Speed Range 0-100 mph; 0-50 m/s; 0-20 km/s; 0-100 knotsDisplay Resolution Wind speed and maximum – 1 unit (0.1 m/s only; wind direction -10° (36 points circular); 1° (digital display mode)Other Inputs RS-485, 4-20 mAVoltage Output 0-5 V CC Full scale for wind speed and directionAlarm Dry Contact Normally open for wind speed and directionDimensions / Weight 144 x 144 x 36 mm / 450 g

Cat. No. Description PriceRMY06201-0 Wind Tracker Display, 110V/60Hz $ 1325.00

Meteorological TranslatorModel 26800 The Model 26800 Meteorological Transla-tor offers a unique and flexible solution for meteorological data measurement, recording and display.

SpecificationsDimensions 200 mm (7.8 in) x 144 mm (5.7 in) x 54 mm (2.1 in)

Panel Cutout 194 mm (7.6 in) x 138 mm (5.4 in)

Weight 0.8 kg (1.8 lb)

Operating Temperature 0˚ C to 50 ˚ CStorage Temperature -30˚ C to 50 ˚ C

DisplayAdjustable high-brightness, high-contrast with 8 user programmable screens. Large font capacity: 3 rows x 20 characters per screenSmall font capacity: 6 rows x 40 characters per screenBoth font sizes may be used together on the same screen

PowerNominal 12 VDC at 250 mA with maximum backlight10 to 30 VDC at 4 W maxTerminals or coaxial jack for included AC-power adapter

Memory2,162,688 Single-precision floating point values for data records256 Temporary floating point values for User Program1 to 512 User Program Instructions

Cat. No. Description PriceRMY26800-0 Meteorological translator, 115V/60 Hz $ 3070.00RMY26880-0 Rack mounting panel $ 430.00

Weather Transmitter Model WXT520

Features• Measures 6 most essential weather parameters• Accurate and stable• Low power consumption - Works also with solar panels• Compact, light-weight• Easy to install• No moving parts• Vaisala Configuration Tool for PC• USB connection• IP66 Housing with mounting kit• Applications: Weather stations, dense networks, harbors, marinas

Specifications

GeneralOperating Temperature -52 to +60 °C (-60 to +140 °F)Storage Temperature -60 to +70 °C (-76 to +158 °F)Input Voltage 5 … 32 VDCTypical Power Consumption 3 mA at 12 VDC (with defaults)Heating Voltage DC, AC, full wave rectified ACSerial Data Interface SDI-12, RS-232, RS-485, USB connectionHousing IP65Housing with Mounting Kit IP66

WindSpeedRange 0 ... 60 m/sResponse Time 250 msAccuracy 0 ... 35 m/s ±0.3 m/s or ±3%, whichever is greater 36 ... 60 m/s ±5%Output Resolution 0.1 m/s (km/h, mph, knots)DirectionAzimuth 0 ... 360°Response Time 250 msAccuracy ±3°Output Resolution 1°

Barometric pressureRange 600 ... 1100 hPaAccuracy ±0.5 hPa at 0 to 30 °C (+32 to +86 °F) ±1 hPa at -52 to +60 °C (-60 to +140 °F)Output Resolution 0.1 hPa, 10hPa, 0.0001 bar, 0.1mmHg, 0.01 inHgRelative humidityRange 0 ... 100 %RHAccuracy ±3 %RH within 0 ... 90 %RH ±5 %RH within 90 ... 100 %RHOutput Resolution 0.1%RH

Cat. No. Description PriceVAWXT520-0 Weather Transmitter Starts at $ 3200.00


We

at

he

r First Responder Weather Monitoring SystemModel Hazmat HM-1U

The new Hazmat Weather Station has the most advanced wind speed and wind direction sensor on the market today. Lightweight, robust and lacking the fragility of conventional cups or propellers, the ultrasonic sensor is a natural fit for the rough and tumble first responder arena. Easily deployed and vehicle mountable, no first response team should be without it.

Multiple Parameters Include:• Wind speed / Wind direction• Temperature / Heat index• Humidity / Barometer• Wind Chill / Dew point• Nuclear radiation• 11 km Wireless communication• Automatic Electronic Compass• CAMEO/ALOHA Compatible• Integrated Data Logger• Operates one full week on four D-cell batteries• Two-minute Field Deployment by One Person!

Cat. No. Description PriceRAHM1U-000 Portable, wireless HAZMAT system $ 9465.00 with Windsonic ultrasonic wind sensor

Stevens DataLogic 3000 Data Logger

Applications• Stand-alone & real-time data acquisition and control• Water resources: Water level/stage, water flow and water quality• Irrigation scheduling • Meteorological & Agrimet• Soil conditions • SCADA • Industrial

SpecificationsPower Requirements 8 - 16 VDC, <0.5mA Standby current (telemetry system may require additional power)Processor 32 bit ARM and dsPIC microprocessorOn-Board Data Storage FLASH storage, 4 GigabytesRecording Interval One (1) second to 24 hoursDigital to Analog (0-5 VDC) 12-Bit resolutionTemperature and Humidity Operating: -40 to 158 F (-40 to 70 C) NEMA 4 Enclosure: 100% condensing Aluminum nclosure: 95% non-condensing

Cat. No. Description PriceLS93750-00 DataLogic 3000 Data Logger $ 2165.00

Multichannel (9) Environmental Data Logger Model GL500-7-2

The GL500, Global multichannel datalogger, is the test addition to our line of rugged remote recording instrumentation. It features 7 analog channels and 2 digital chan-nels for data recording. The GL500 can record over 40,000 readings and has four unique recording options, fast (10 samples per second), programmable interval (1 second to multiple years), garithmic, and exception.

SpecificationsMemory Non-volatile flash memoryPower: Voltage 7.2 VDC Min. to 24.0 VDC Absolute MaxStandby Current: 70uA TypicalLogging Current 5mA Typical + sensor currentAnalog Sensor Inputs 4-20mA (0-5VDC as factory option)Resolution 12-Bit, 4096 StepsChannels 7 Input channels + battery voltage monitorSensor Warm-up Time Programmable, 0-15 SecDigital Inputs 2 Independent pulse countersMaximum Input Voltage 24VDC

Cat. No. Description PriceGLGL50072- Multichannel Data Logger $ 1175.00

Data Collector Model TR-57U

The TR-57U gives you a high quality graph display of collected data. Each graph displays the data for one chan-nel and can be easily scrolled across by using the handy operation dial or the buttons on the front of the main unit. This function gives you the data you want in an easy-to-understand format.

SpecificationsType Data collectorCompatible Devices TR-51A, TR-52, TR-51, TR-51S, TR-52S, TR-71U, TR-72URecording Capacity 256,000 Data readings 16 Units of TR-71U at full data (16,000 readings x 16 ) Collect and manage data from up to 250 separate collections.Functions Downloading data (possible to display results of upper and lower limit check after downloading) Display Saved Data Graphs, Set Recording Start for Remote DataLoggers Display saved data Highest and Lowest measurement values *These upper and lower limit settings are for the TR-57U and will be used by it when downloading data to determine if a reading is within the acceptable rangeOperating Conditions Temperature : 0°C to 50°C Humidity : Less than 90%RH (Without dew condensation)

Compatible OS Windows 98SE / Me/ 2000 / XP / Vista (English)

Cat. No. Description PriceTDTR57U-00 Handheld Graphical Data Collector $ 370.00

291 800.463.4363

We

at

he

r

Temperature Datalogger (2 channels)Model Testo 175-T3

The 175-T3 Temperature Data Logger logs temperature at 2 different points simultaneously over a period of several days, weeks or even months.

• Data analysis in table or graphics form, with email function• Alarm message, reliable transmission of alarm value limits• Data transfer to PC or notebook by attachable interface (optional)

SpecificationsData Storage Capacity 16,000 ReadingsSampling Rate 10 Seconds to 24 HoursMeasurement Range -60°F to 1832°F (Type K Thermocouple) -60°F to 750°F (Type T Thermocouple)Accuracy ±0.9°F (-60° to 160°F) ±0.7% of ReadingLCD Display Version 1 LineResolution 0.1cChannels 2 External ChannelsApplication Temperature 32°F to 160°FStorage Temperature -40°F to 185°F

Cat. No. Description PriceTE175T3-00 2 Channel Temperature Data Logger $ 415.00

Smart Reader Plus 9 Pulse Info Logger

• For pulse and contact closures• Memory: 32KB• Two (2) external inputs• Lithium cells with 10 year warranty• Sampling rate: Selectable from 25/sec. up to 8/hrs• Dimensions: 107 x 74 x 22 mm• Weight: 100g• TrendReader data transfer software and interface cable (optional)• Can also be used with Met One rain gauges series 370 and 380

Cat. No. Description PriceACRSRP009- Smart Reader Plus 9 $ 925.00ACRTRWIN- TrendReader with cable $ 240.00

Data Loggers with direct USB Interface

EL-USB-4 / 4-20 mA USB Data Logger

• 4 to 20 mA Measurement Range• More than 32,000 Reading Capacity• Two Programmable Alarm Thresholds with LED Indication• Programmable Sample Rates from 1 Sec. to 12 Hours• Measurements from a Variety of External Sensors can be taken with connection

EL-USB-2 Temperature/RH USB Data Logger

• -35° to +80°C (-31° to +176°F) and 0 to 100% RH• 16,000 Reading Capacity on Each Range• Programmable Sample Rates from 10 Sec. to 12 Hours• Two Programmable Alarm Thresholds with LED Indication

EL-USB-CO Carbon Monoxide USB Data LoggerEL-USB-CO Is Designed to Be Used on Non-Life Saving Analysis Projects Only.

• 0 to 1,000 ppm Carbon Monoxide Measurement Range• More Than 32,000 Reading Capacity• Programmable Sample Rates from 10 Sec. to 5 Min.• Programmable Alert Thresholds with LED Indication• Audible Alarm Located in Cap

Cat. No. Description PriceLAELUSB1-0 Temperature Data Logger with USB Interface $ 100.00LAELUSB2-0 Temperature/RH and Dew Point Data Logger $ 130.00LAELUSB2LCD Temperature/RH and Dew Point Data Logger $ 155.00 with LCD Display LAELUSB3-0 Voltage USB Data Logger $ 120.00LAELUSB4-0 4-20 mA USB Data Logger $ 120.00LAELUSBCO- Carbon Monoxide Data Logger $ 155.00 with USB Interface


We

at

he

r Air Temperature SensorsModel 060A

SpecificationsThe Model 060A-2 is designed for general purpose measurements of ambient air temperature.

Housing 3/8 in (9.5 mm) OD x 6 in (152.4 mm)Range -50°C to +50°C (Other ranges available to meet special requirements)Accuracy ±0.1°C Throughout range, PSD compliantCable 1 ft Pigtails (for use with 076 or 077 Radiation Shield) Additional length may be supplied, specify length

Cat. No. Description PriceMET060A2-0 Air Temperature Sensor $ 220.00 Model 060A

BarometricPressure Sensor Model 092

Specifications PerformanceRange 600 to 1100 hPa (17.72 to 32.48 inch/hgResolution 0.1 hPaTemp. Operating Range -40°C to 55°CTemp. Compensated Range -40°C to 55°CAccuracy ±0.35 hPa @ 20°C ±1.0 hPa (±0.03 in Hg ) over full range or ±0.5 hPa over any 200 hPa range.Long Term Stability ±1.0 hPa in 1 year

Electrical CharacteristicsAnalog Output 0-1, 0-2, 0-2.5 or 0-5 VDC (Analog output automatically adjusts from zero to full scale for range selected.)Digital Output RS-232, RS-485 & SDI-12

Cat. No. Description PriceMET092-000 Barometric Pressure Sensor $ 795.00 Model 092

Weather Balloons

The Weather Balloons are produced by rotational molding of natural rubber. Their uniform wall thickness prevent premature blow-outs, and they are ozone resistant. Reinforced necks allow use in strong winds without tearing.

Each balloon is inflated, inspected, and tested before being dusted and sealed in a moisture-proof polyethylene bag. They may be stored up to 7 years if kept in a cool, dark room. No pre-flight conditioning is required. Weather Balloons are not returnable.

SpecificationsModel Nominal Color Neck Uninflated Standard Burst Weight Diameter Diameter Inflated Diameter (g) in (mm) in (cm) Diameter ft (cm) ft (cm)8210 10 Red 0.9 (23) 3.2 (8) 1.5 (46) 2.0 (60)8230 30 Red 0.6 (14) 7.1 (18) 2.1 (64) 3.3 (102)8231 30 Black 0.6 (14) 7.1 (18) 2.1 (64) 3.3 (102)8232 30 Natural 0.6 (14) 7.1 (18) 2.1 (64) 3.3 (102)8233 100 Red 0.6 (14) 13.8 (35) 2.4 (74) 4.4 (133)8234 100 Black 0.6 (14) 13.8 (35) 2.4 (74) 4.4 (133)8235 100 Natural 0.6 (14) 13.8 (35) 2.4 (74) 4.4 (133)8236 200 Natural 1.3 (32) 18.9 (48) 3.9 (118) 8.9 (270)8237 300 Natural 1.3 (32) 23.6 (60) 5.0 (154) 12.8 (390)

PriceContact us for prices Other sizes and balloon inflation kits are also available

All Weather Plastic Rain GaugeModel P-2000 The ALL Weather Plastic Rain Gauge, model P-2000, is made of rugged butyrate plastic and can measure up to 280mm of precipitation. The top fun-nel catches the rain and delivers it to the measur-ing tube. The measuring tube has a capacity of 25.4mm. Rainfalls of less than 25.4mm can be read directly from the measuring tube. Weight: 0.9 kg

Cat. No. Description PriceP2000-0000 Plastic Rain Gauge, metric $ 59.00

311 800.463.4363

We

at

he

r

Handheld Digital Barometer-AltimeterModel 230-M202 • Easy to use • Rugged and Sensitive• Highly Accurate• Ideal Portable pressure reference for Weather Station site certification and production process monitoring• Displays station or sea level pressure• Altitude in feet or meters• NIST certificate included • CE compliant

SpecificationsUnits Full Scale Accuracy ResolutionPressuremm Hg 1000 ± .015 .1in Hg 39.37 ± .01 .01mb 1333 ± .2 .1kPa 133 ± .02 .01psi 19.33 ± .01 .001AltitudeFeet 36,000 ± 9 1.0Meters 10,973 ± 3 1.0Power 4 AA Alkaline batteries Accuracy (Full Scale = 38.674 PSIA or 2,000 mm Hg Abs) ± 0.015% F.S. from 0-1,000 mm HgA ± 0.025% F.S. 0-1,000 - 2,000 mm HgA

Cat. No. Description PriceNO230M202- Handheld Digital Barometer-Altimeter $ 1975.00 Model 230-M202 (with certificate and protective boot)

Fan Aspirated Radiation ShieldModel 076B

Features• Errors reduced to < 0.05°F• Accommodate several sensors for Delta T measurements• Radiation errors independent of outside emissivity• Low-conductive interconnects• DC or AC Power operation• Corrosion resistant materials throughout and gloss white finish• Easy mounting and tower servicing

SpecificationsAspiration Electric FanFlow Rate 1000 CFM Scrubbing, 500 CFM SampleTemperature RangeStandard -50°C to +85°COptional -50°C to +100°CPower Required 115 VAC, 20 watts, 12 VDC, 250 mA, 220 VAC, 18 watts

Cat. No. Description PriceMET076B1-0 Fan Aspirated Radiation Shield, 115V $ 1010.00MET076B110 Fan Aspirated Radiation Shield, 220V $ 1010.00

Large Anemometer Display Unit for Cranes Model VGT 105

• 2/3 digit 100x62 High luminosity display (equivalent to 120 x 90 displays).

• Complies with the requirements of the ITC-MIEAEM- 2• Includes a very robust sensor • Includes light and sound markers• 4 Programmable alarms • Adaptable to any sensor on the market • Wind release monitoring • Auxiliary relay outputs • IP 65

The VGT-105 HL has been developed to the requirements of the MIE-AEM-2 but includes more features, including:• A large 120 x 90 display• Anemometer failure detection • Wind release detection• 4 Alarms configurable in terms of value, type of warning and hysteresis.• 4 Voltage-free contacts to match the siren, yellow light and red light warnings, and an auxiliary contact

Cat. No. Description PriceIED5138-00 VGT 105 Led Display $ 2350.00 with flashing lights and signals

Anemometer with Flashing Lights and Signal for Cranes Model SAG 105

The Wind speed sensor with sound and light alarm especially designed to meet ITC MIE-AEM-2 requirements on elevating and maintenance apparatus regulations, regarding tower cranes in construction work and other applications.

Features• Compact • Watertight • Heavy-duty• Aesthetic • Reliable • Low-cost• Tropicalized • Supplied with clamps and magnets• 4 Selectable trigger levels for the alarm and the pre-alarm• Wind tunnel tests carried out on 100% of units

SpecificationsPower supply 48 - 115 - 230 - 400 VACPower consumption 6 W (0,5 VA at stand-by) Operating temperature -20 to 60 °C (ice-free) IP protection level IP55 Sound power level 115 dBLuminous intensity yellow > 100 cdLuminous intensity red > 80 cdMagnet holding power > 90 kg

Cat. No. Description PriceIED5140-00 SAG 105 Anemometer $ 525.00 with flashing lights and signals


We

at

he

r MicroMet Integrated Data Acquisition UnitModel 455B

A built-in Datalogger, scaled directly to the recorded measurements, provides an easy to read, permanent record of the measured meteorological variables. The system includes the Datalogger, the interface board, and panel-mounted Smart Keyboard/ Display.

Provision is made for the addition of an optional Storage Module for extended memory capability.

This full-featured device provides virtually everything needed for a complete and total weather data system. All hardware is mounted within a high quality compression molded fiberglass enclosure. The enclosure is designed specifically for harsh manufacturing conditions and hostile environments, and will outlast steel or stainless steel in a corrosive or marine environment.

The enclosure meets and exceeds most NEMA grade specifications. Door hinges are molded, with stainless steel hinge pins. Cable entry is through a port in the enclosure bottom, fitted with a sealing clamp. The enclosure contains a latch with integral tumbler lock for security.

SpecificationsEnclosureColor/Finish Beige, texturedChassis Enclosure N/ASecurity Locking latch w/keyInputsAnalog 12Pulsed (2) 8-bit or (1) 16-bitComputations 28Viewable Elements 20Lightning ProtectionLightning Protection StandardSoftwareSensor Basic Software MicroMet Plus

Cat. No. Description PriceMET455B-00 MicroMet Integrated Data Acquisition $ 3800.00 Unit Model 455B

Solid State Ultrasonic Wind SensorModel 50.5 To Measure Wind Speed and Direction• No moving parts • Digital and analog outputs• Time-proven design• Sensor emulation• 16-point wind tunnel calibration with hundreds of units installed worldwide, no other sensor technology has the history of time proven field performance comparable to the Solid State Series 50.5 Sensor.

Specifications Wind SpeedRange 0 - 50 m/secAccuracy ±0.15 m/sec £ 5 m/sec or ±2 % ³ 5 m/secResolution 0.1 m/secWind Direction Range 0 - 360°Accuracy ±3°Resolution 1°EnvironmentalMaximum Operating Range 0 - 85 m/secOperating Temperature -30°C to +55°CExtended Temperature Range -50°C to +55° C with external heater

Cat. No. Description PriceMET50.5-00 Solid state wind sensor model 50.5 $ 3500.00MET50.5H-0 Solid state wind sensor, heated model 50.5H $ 4150.00

Wind Speed Sensor Model 014A

SpecificationsRange 0-45m/s (0-100 mph)Starting Threshold 0.45m/s (1.0 mph)Accuracy 0.11m/s (0.25 mph) or 1.5%Contact Rating 10 mA maximumTemperature -50°C to +70°COperating Range Sensor Cable Quick-connect connector with vinyl jacketed, shielded cable

Cat. No. Description PriceMET014A-00 Wind Speed Sensor $ 365.00

331 800.463.4363

We

at

he

r

Solar Radiation Sensor Model 096-1 The Model 096 Pyranometer uses a silicon solar cell mounted in a cosine corrected miniature head. It provides an economical solution to the measurement of solar radiation for use in meteorological, agricultural and hydrological studies.

SpecificationsSpectral Response Nanometers: 400 - 1100 Microns: 0.4 - 1.1Calibration Against Eppley B&W under natural daylightSensitivity 8 mV/kwatt meter-2 with 100 ohm load, approx.Impedance 100 ohms load (dependent upon sensor sensitivity)Temperature Depend ±.15%/degree C, max.Linearity ±1% from 0 to 3000 watts meter-2Response Time 10 microseconds (10% - 90%)Cosine Response Corrected up to 82° incident angle Azimuth error less than 1% over 360° at 45° elevationDimensions 3 in (7.6 cm) diam. x 19 in (48.2 cm) h, including mountWeight 1.2 lbs (.54 kg), including mountMounting Leveling plate and mounting base included Requires PN 1552 fitting or similar deviceCable PN 1832-xx (xx = length in feet)

Cat. No. Description PriceMET0961-00 Solar Radiation Sensor $ 690.00 Model 096-1

SP LITE Silicon Pyranometer • Measures solar radiations• Applications: teaching, air pollution study, evapotranspiration in agriculture, etc.• Sensitivity: 100 μV/Wm-2• Range: +2000 Wm-2• Supplied with a 5 m cable

Cat. No. Description PriceKZSPLITE-0 SP-Lite Silicon Pyranometer $ 585.00

Wind Direction SensorModel 024A

SpecificationRange 0 - 360°Starting Threshold 1.0 mphAccuracy ±5°Delay Distance Less than 5 ft

Damping RatioStandard 0.25 (Metal Vane)Fast Response 0.4 (Foam Vane)

PotentiometerSand, Dust, Fungus MIL-E-5272Salt Spray MIL-E-12934Electrical Range 0 - 360° 0 - 540° with approp. translatorOperating Range -50°C to +70°C

Cat. No. Description PriceMET024A-00 Wind Direction Sensor $ 545.00 Model 024A

Relative Humidity and Temperature Sensor Model 083E

SpecificationsRelative HumidityRH Sensing Element Thin film polymer capacitorRange 0 to 100% RHTemperature -50 °C to +50 °C (-58 °F to 122 °F) Operation RangeResponse Time 10 sec. with 2 m/s aspirationAccuracy ± 2.0% from 0 to100% RHTemperature Coefficient Compensated internallyOutput 0 to 1 VDC Standard (0 to 5.0 VDC Optional)AutoMet Auto ID Yes (Model 593A Only))

TemperatureTemperature Sensor ThermistorTemperature Range -50 °C to +50 °C (-58 °F to 122 °F)Accuracy ±0.10 °C (0.18 °F)Output ResistiveAutoMet Auto ID No

Cat. No. Description PriceMET083E06- Relative Humidity Sensor $ 870.00 Model 083E



We

at

he

r Relative Humidity and Temperature Probes Model HMP155 Features• HUMICAP®180R sensor - superior long-term stability• Optional warmed humidity probe• Plug-and-play• Chemical purge• USB connection for service use• Installation kits for DTR13 and DTR503 radiation shields and also for a Stevenson screen• Weather-proof housing IP66• New, fast temperature probe• Different output possibilities: voltage, RS-485, resistive Pt100• Applications: meteorological applications, aviation and road weather, instrumentation

SpecificationsRelative humidityMeasurement range 0 to 100 % RHAccuracy (incl. non-linearity, hysteresis and repeatability) at+15 to +25 °C (+59 to +77 °F) ±1 %RH (0 to 90 %RH)TemperatureMeasurement range -80 to +60 °C (-112 to +140 °F)Accuracy with voltage output at-80 to +20 °C ±(0.226- 0.0028 x temperature) °C+20 to +60 °C ±(0.055+0.0057 x temperature) °C

Cat. No. Description PriceVAHMP155-0 Temperature/RH Sensor $ 870.00

Precision Precipitation Gauge 370 Series

• Measures precipitation accurately • Tipping bucket type with Reed switch • Power: 115VAC (heated version) • Output (pulsed heated version): 10mA, 28VDC • Made of non-corrosive material • Self-emptying • Accuracy: ±0.5% at 13mm/hr., and ±1.0% between 25 and 75mm/hr. • To record your data, we suggest the SmartReader Plus 9 logger

Cat. No. Diameter Calibration Price MET370-000 8 in. 0.25/0.2 $ 890.00MET382-000 12 in. 0.1 $ 1010.00

Heated Model For SnowMET375-000 8 in. 0.25/0.2 $ 1320.00MET385-000 12 in. 0.2 $ 1430.00

RainLogger Recording Rain Gauge

• Tipping Bucket Rain Gauge can be installed directly in the ground • Useful for remote locations • Combined with the RainLogTM Data Logger, it records rainfalls for one year • Reading every minute (when it rains only) • Non-volatile memory of 10,000 readings • Software included • Power: 2 AAA cells

Cat. No. Description PriceRALOGGER-C RainLogger Kit $ 375.00

Passive Infrared Detector for Traffic Data AcquisitionModel IR 250

Applications Detection of vehicles for all purposes of traffic data acqui-sition as a component for:• Vehicle Counting• Average Speed Assessment• Length Classification• Presence Detection in traffic data acquisition systems

SpecificationsMechanicalCase material Anodised aluminiumCable Length 1 mInfraredSensors Static and dynamicSpectral Response 8 - 14 mmAccuracyCounting Typ. ± 3%Speed Average Typ. ± 10% (3 20 events)Classification Depending on length classesEnvironmentalOperating Temp. - 40°C to + 70°CHumidity 95% RH max.Sealing IP 64 Splash proof

Cat. No. Description PriceASIR255759 Traffic Data Logger with Cable $ 1290.00

351 800.463.4363

We

at

he

r

Present Weather and Visibility SensorModel OWI-430 DSP-WIVIS

The OWI-430 DSP-WIVIS™ is the most advanced present weather and visibility sensor ever made. The fully automated instrument provides accurate visibility, present weather and precipitation measurement in a single sensor.

SpecificationSnow / Rain Accumulation .001 to 999.999 mmSnow / Rain Measurement Resolution 0.001 mmRain Dynamic Range 0.1 to 3000 mm/hrRain Measurement Accuracy 5% accumulationSnow Dynamic Range 0.01 to 300 mm/hrSnow Measurement Accuracy 10% accumulationTemperature -40° to 122° F (-40° to 50° C)Humidity 0 to 100%Precipitation / Dust NEMA 4 type protection

Cat. No. Description PriceOSOWI430DR Present Weather and Visibility Sensor $ 11205.00

RoadWatch SS Non-Contact Infrared Road Temperature Monitoring System

SpecificationsRoad Temperature Accuracy ±1% of full scale or ±1° CRoad Temperature Display Range -40° to +54.4°C; -40° to +130°FAir Temperature Accuracy ±1°C; ±2°FAir Temperature Display Range -40° to +50°C; -40° to +122°FOperating Temperature Range -40° to +75°C; -40° to +167°FRepeatability To within 1°C; 2°FEmissivity Factory calibrated at 0.96Calibration Lifetime factory digital calibrationField of View 10 degreesReadout Scales Factory set as Fahrenheit or CelsiusResponse Time 100 milliseconds (damped to 500 milliseconds)Operating Voltage 12 Volts DC (nominal)

Cat. No. Description PriceCV84902622 RoadWatch SS Kit, C° with 12” Cable $ 790.00CV84902421 RoadWatch SS (Sensor only), $ 425.00 °C with 12” Cable

Lightning Detector for Laptop and Desktop ComputersModel LD-250

The LD-250 uses a small active antenna to receive the radio signals from lightning strikes. These signals are the crackling you hear on an AM radio during a thunderstorm. The direction-finding antenna is able to tell which direction the signal is coming from. The software measures the strength of the received signals to estimate distance. Special signal processing in software reduces the effects of strike-to-strike energy variations providing more accurate distance information.

Cat. No. Description PriceBOLD250-00 Lightning Detector, 120V $ 1045.00

Thermopile Shadowband RadiometerModel TSR-1

The Model TSR-1 Thermopile Shadowband Radiometer is a scientific field instrument that simultaneously measures total, direct-normal, and diffuse irradiance across the entire solar spectrum from 300 nm to 2800 nm. The Thermopile Rotating Shadowband instrument represents a major breakthrough in solar-radiation instrumentation, combining YES rotat-ing shadowband radiometer technol-ogy with a true thermopile pyranometer to provide all components of solar irradiance with one instrument. With its advanced design, accuracy, high reliability, and automated remote operation, the TSR is the ideal solution for applications such as solar resource assessment.

Features• Thermopile pyranometer detector• Angle-corrected direct-normal data• Thermally stabilized detector• Smart rotating shadowband• Multichannel data acquisition and control (DAC) system for PV/thermal monitoring

Cat. No. Description PriceYATSR1-000 Thermopile Shadowband Radiometer $ 18 450.00 Model TSR-1YAYESDAS-00 YESDAS Manager Software Kit $ 1150.00 for MS-Windows


We

at

he

r Kestrel® Wind and Weather Instruments

Available Functions 1000 2000 3000 2500 3500 3500dt 4000 4200 4250 4300 4500Current Wind Speed X X X X X X X X X X X

Maximum Wind Gust X X X X X X X X X X X

Average Wind Speed X X X X X X X X X X X

Volume Air Flow (CFM) - - - - - - X

Wind Direction - - - - - - - X

Automatic Crosswind - - - - - - - X

Calculation

Headwind/Tailwind - - - - - - - X

Temperature - X X X X X X X X X X

Wind Chill - X X X X X X X X

Relative Humidity - - X - X X X X X X X

Heat Stress - - X - X X X X X

Index

Dewpoint Temp - - X - X X X X X X X

Humidity Ratio (grains) X X

Evaporation Rate X

Relative Air Density X

Delta T X

Barometric Pressure - - - X X X X X X X

Absolute Pressure X

Altitude - - - X X X X X X X X

Wet Bulb Temp - - - - X X X X X X

Density Altitude - - - - - X X X X X

Digital Compass - - - - - - - X

Backlit Display - X X X X X X X X X X

Waterproof & Floats X X X X X X X X X X X

Hard Cover X X X X X X Available Available Available Available Available

Clock - - - X X X X X X X X

Computer Interface - - - - - Available Available Available Available Available

Pressure Trend - - - X X X X X X

Data Storage - - - - - X X X X X

Five-Year Warranty X X X X X X X X X X X

NV Model Available - - - X X X - X

Cat. No. Description Price Cat. No. Description Price NK1000-000 Pocket Wind Meter, Model 1000 $ 135.00 NK0840GRY- Pocket Wind Meter, Model 4000 $ 455.00NK2000-000 Pocket Wind Meter, Model 2000 $ 180.00 NK0842-000 Pocket Air Flow Tracker, Model 4200 $ 470.00NK2500-000 Pocket Wind Meter, Model 2500 $ 270.00 NK4250-000 Racing Weather Tracker, Model 4250 $ 470.00NK3000-000 Pocket Wind Meter, Model 3000 $ 275.00 NK4300-000 Construction Weather Tracker, Model 4300 $ 470.00NK3500-000 Pocket Wind Meter, Model 3500 $ 350.00 NK4500-000 Pocket Weather Tracker, Model 4500 $ 470.00NK3500DT-0 Delta T Pocket Wind Meter, Model 3500 $ 365.00

371 800.463.4363

Ai

r

Air Sampling Equipment Model HVP-2000 This unit is built around a two stage centrifugal fan type brushed blower. The tangential discharge ex-haust allows a higher maximum flow rate than other similar types of units. To reduce motor winding burn out, the HVP-2000 has a separate motor cooling fan. Brushes-life will range between 800 to 1,200 hours depending on sampling motor speed. Motor brushes can be changed in the field within 15 to 20 minutes with a screwdriver.

Features• 2-Stage, Brushed Blower • Adjustable Flow Rate• Elapsed, Resettable Timer • Instantaneous Flow Reading• For Continuous Use • PM-10 Adaptable

Cat. No. Description PriceHIHVP2000- High Volume Air Sampler. 115 VAC. $ 2740.00 Manual Speed Control, Brushed Motor Blower, Unit includes 8” x 10” filter paper holder.

High Volume Total Suspended Particulate (TSP) Air SamplerModels TE-5170, TE-5170 BL,

TE-5170 D and TE-5170 DBL Mass Flow Controlled Total Suspended Particulate TSP High Volume Air Sampling System. Includes anodized aluminum shel-ter, 8” x 10” stainless steel filter holder with probe hole, aluminum blower motor as-sembly, continuous/flow pressure recorder, elapsed time indicator, mass flow controller w/20-60 SCFM air flow probe, and 7-day mechanical timer.)

SpecificationsFlow rate 39 cfm, 60 cfm (1.1 to 1.7m3)Ambient Temperature Application -30 to + 50ºCRelative Humidity Application 0 - 100%

Cat. No. Description PriceTE5170-000 Mass Flow Controlled TSP $ 3750.00 High Volume Air Sampling SystemTE5170BL-O Same as TE5170-000, $ 5830.00 except with brushless motorTE5170D-00 Same as TE5170-000, except with $ 4240.00 additional digital timerTE5170DBL Same as TE5170D-00, $ 6320.00 except with brushless motor

Continuous Particulate Monitor Model BAM-1020

Features• Fast and easy field audits using common FRM audit tools• Bench top or equipment rack mounting in mobile or stationary shelters• Rugged anodized aluminum, stainless steel, and baked enamel construction• Highly accurate, reliable, and mechanically simple flow system• Advanced Smart Heater technology precisely controls sample relative humidity• Integrated datalogger allows the connection of up to six additional meteorological sensors• Internal memory provides up to 182 days of digital data storage• Data retrieval through RS-232 serial ports using direct PC connections, modems, printers, or digital data collection systems

SpecificationsMeasurement Resolution 0.1 μg/m3Display Resolution 1 μg/m3Standard Range 0 to 1.000 mg/m3 (0 to 1000 μg/m3)Optional Ranges 0 to 0.100, 0.200, 0.250, 0.500, 2.000, 5.000, 10.000 mg/m3 (special applications)

Flow Rate 16.7 liters/minute adjustable 0 to 20 LPM range actual or standardized flowOperating Temperature 0 to +50˚CAmbient Temperature -30˚ to +60˚CAmbient Humidity 0 to 90% RH, non-condensingEnclosure Weatherproof enclosure or shelter is requiredPower Supply 100-230 VAC, 50/60 Hz. Factory configured.

Cat. No. Description PriceMETBAM1020 Continuous Particulate Monitor $ 17 200.00 Model BAM-1020



Ai

r Mass MonitorModel E-BAM

The Met One E-BAM is a portable real-time beta gauge traceable to US-EPA requirements for automated PM2.5 and PM10 measurement.

Features• Accuracy and precision consistent with US-EPA requirements for Class III designation for PM2.5• Real-time, accurate results regardless of season or geographic location without correction factors.• True ambient sampling provides accurate measurement of semi-volatile nitrates and organic compounds.• Lightweight, ruggedized construction may be easily mounted on a tripod in minutes.• Rugged all-weather construction allows for true ambient sampling.• Will operate on either AC or DC power. Battery and solar operation available.

SpecificationsRange 0 to 10 mg per cubic meterAccuracy 2,5 μg in 24 hour periodMeasurement Cycle Standard to 60 mins, actual sampling time 59 minsBeta Source C14, less than 75 microcurie, Half lige of 5730 yearsFlow Rate 16,7 liters per minute, adjustableFlow Accuracy ±3% of reading, volumetric flow controlledSample Pump Dual diaphragm type, internally mountedAlarm Signals Filter, flow, power and operation failureInput Power 12 Volts DC @ 36 Watts, 25°C

Cat. No. Description PriceMETEBAM-00 Mass Monitor Model E-BAM $ 9995.00

MINIVOL TAS Tactical Air Sampler

The MiniVol® Tactical Air Sampler (TAS) is based on the original MiniVol® air sampler, developed jointly by Airmetrics and the United States Environmental Protection Agency (EPA) in 1990. Implementing patented low-flow technology, the TAS delivers precise and accurate results in a lightweight compact device. The MiniVol® TAS is a versatile and reliable sampling platform that is attractive to end-users worldwide. Although specifically designed for “saturation” sampling, the MiniVol® has been routinely used in a wide variety of applications including prescribed burns, fugitive dust studies, remote location sampling, indoor air studies, fence line monitoring and ambient air sampling at remediation sites.

SpecificationsActive flow ControlFlow range 0-10 LPMNominal flow 5LPMDimensions 10” x 12” x 7”Weight 9.8LBSTransport Case 19.75” x 12” x 18”Shipping Weight 37LBSLi-Ion Battery 14.8V / 118 Watt HoursBattery Charger Input 100-240VAC, 47-63Hz - Output: 18VDC, 2A

Cat. No. Description PriceAIMINIPM10 MiniVol Portable Air Sampler, PM 2.5 $ 3025.00 AIMINIPM25 MiniVol Portable Air Sampler, PM 10 $ 3300.00

391 800.463.4363

Ai

r

AEROTRAK Handheld Particle Counter Model 9306

Typical applications include cleanroom monitoring, research, exposure assessment, indoor air quality, filter testing, clearance testing, quality assurance and contaminant migration studies.

Features• User-adjustable bin sizes• Two-level location identification• Data log information, stores over 100,000 data sets• Easy to use, touch screen interface• TRAKPRO™ Data Analysis Software

SpecificationsBin Sizes 0.3 to 10μm, user-adjustable; factory-calibrated at 0.3, 0.5, 1, 3, 5 and 10 micronsZero Count <1 particle counted in 5 minutes (JIS)Coincidence Loss ±5 ±5% at 2,000,000 particles/ft3Data Logging More than 100,000 individual sample setsFlow Rate 0.1 cfm (2.8 lpm) ±5% accuracy, internal flow controlDisplay 3.7 in. LCD color touch screenConnectivity USB compatibleOperating Temperature 41° to 95° F (5° to 35°C)Storage Temperature 32° to 122° F (0° to 50°C)AC Power 110 to 260V, 50 to 60Hz

Cat. No. Description PriceTSI9306-00 Handheld Particle Counter, Model 9306 $ 4675.00

AEROTRAK Handheld Particle Counter Model 9303 Low cost and versatile handheld particle contamina-tion monitoring. The 9303 features a sturdy and yet lightweight high-impact injection-molded plastic design for easy handling. The instrument is easy to configure using an intuitive keypad.

Features• AEROTRAK 9303: 0.3 - 10 μm• 0.1 CFM (2.83 LPM) flow rate• Up to 3 channels of simultaneous data• ISO 21501-4 compliant• USB serial output• 1,500 sample record storage

SpecificationsSize Range 0.3 -10 μmChannel Sizes 0.3 μm and 5.0 μm fixed; 0.5, 1.0, 2.0, or 2.5 μm selectable middle channelCounting Efficiency 50% at 0.3 μm; 100% for particles > 0.45 μm (per JIS)Concentration Limits 2,000,000 particles / ft3 at 5% coincidence lossVacuum Source Internal pumpCommunication Mode USB serial outputData Storage 1,500 sample records

Cat. No. Description PriceTSI930301- Handheld Particle Counter, Model 9303 $ 2595.00

AEROTRAK Portable Particle CounterModels 9310 and 9510

The AEROTRAK 9310 and 9510 Portable Particle Countersoffer the most features and flexibility for customers interestedin manually monitoring particle contamination at high flowrates. These particle counters can be used as stand-aloneportable counters or can be integrated into a facility monitoringsystem. Both models offer a compact light weight ergonomicdesign for ease of use.

Features • AEROTRAK 9310: 0.3 - 20 μm• AEROTRAK 9510: 0.5 - 20 μm• 1 CFM (28.3 LPM) flow rate• Up to 6 channels of simultaneous data• USB and Ethernet (TCP/IP) output• 10,000 sample record storage

Specifications

Features 9310 9510Size Range 0.3 - 20 μm 0.5 - 20 μmChannel Sizes 0.3, 0.5, 1.0, 3.0, 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm 5.0, 10.0 μm Additional channel Additional channel sizes available sizes availableCounting Efficiency 50% at 0.3 μm; 50% at 0.5 μm; 100% for particles > 100% for particles > 0.45 μm (per JIS) 0.75 μm (per JIS)Concentration Limits 400,000 particles/ft3 at 5% coincidence loss Vacuum Source Internal pump with patented* flow control technologyCommunication Mode USB and Ethernet (TCP/IP) outputData Storage 10,000 sample records

Cat. No. Description PriceTSI9310-00 Portable Particle Counter, Model 9310 $ 9900.00TSI9510-00 Portable Particle Counter, Model 9510 $ 9400.00

Send us your e-mail address to be informed of our promotions !

[email protected]


Ai

r IAQ-Calc Indoor Air Quality MetersModels 7525 and 7545 Applications • Verify building HVAC system performance• Examine building IAQ conditions to optimize worker productivity

Models 7525 and 7545• Calculates % outside air from either CO2 or temperature• Directly calculates dew point and wet bulb temperatures• Electrochemical sensor measures CO (Model 7545)• Models 7525 and 7545 shows up to three parameters

SpecificationsModels 7525 and 7545

CO2Sensor Type Dual-wavelength NDIR (non-dispersive infrared)Range 0 to 5000 ppmAccuracy ±3.0% of reading or ±50 ppm, whichever is greaterResolution 1 ppmResponse Time 20 secondsTemperatureSensor Type ThermistorRange 32 to 140°F (0 to 60°C)Accuracy ±1.0°F (±0.6°C)Resolution 0.1°F (0.1°C)Response Time 30 seconds (90% of final value, air velocity at 400 ft/min [2 m/s])Relative HumiditySensor Type Thin-film capacitiveRange 5% to 95% RHAccuracy ±3.0% RHResolution 0.1% RHResponse Time 20 seconds (for 63% of final value)% Outside AirRange 0 to 100%Resolution 0.1%CO (Model 7545 only)Sensor Type Electro-chemicalRange 0 to 500 ppmAccuracy ±3% of reading or ±3 ppm, whichever is greaterResolution 0.1 ppmResponse time <60 seconds to 90% step changeLogging Capability (Models 7525 and 7545)Ranges Model 7525 logs up to 30,300 data points with key (3) measured parameters enabled Model 7545 logs up to 26,900 data points with key (4) measured parameters enabledTime Constant 1 sec, 5 sec, 10 sec, 20 sec, 30 sec (user selectable)Log Intervals 1 second up to 1 hour (user selectable)

Cat. No. Description PriceTSI7545-00 Indoor Air Quality Meter, Model 7545 $ 2595.00TSI7525-00 Indoor Air Quality Meter, Model 7525 $ 2275.00

Portable Microbiological Air Sampler Model Microflow

Applications• Clean rooms• Hospitals• Pharmaceutical plants• Food plants• Building air conditioning plants (HVAC)• Water treatment plants• Working places

Features• Autoclavable anodised aluminum sampling head, with conical holes: 60 mm head: 219 holes (ø 1 mm) 90 mm head: 380 holes (ø 1 mm)• Autoclavable anodised aluminum support plate• Bayonet head coupling system• Rechargeable battery operated. Battery Ni/Mh (memory effect free) with 4 hours battery life• Recharging battery in 3 - 4 hours• Manual, sequential and programmed sampling• Delay start function• Preset sampling flow rates: 30-60-90-100-120 l/min• Remote switch with infra-red rays control• Storing and displaying up to 99 samplings• USB output interface for PC computer connection (optional)• Dimensions: 310 x 130 x 170 mm (w x d x h)• Weight: 1,9 Kg

Cat. No. Description PriceAQG1004-00 Microbiological Air Sampler, Microflow 60 $ 3765.00AQG1015-00 Microbiological Air Sampler, Microflow 90/C $ 4350.00 (Automatic flow rate compensation system)AQG1027-00 Microbiological Air Sampler, Microflow 60-90/C $ 4980.00 (Automatic flow rate compensation system)

411 800.463.4363

Ai

r

3M Multi-Gas Detector 950 Series

950 Series• Detect up to 5 gases simultaneously• Eighteen sensors including a PID sensor which can be selected to detect over 90 gases• Massive data-logging capacity• Easy-to-use 3M Know Your Air software with intuitive interface• Also available with a Metal Oxide broadband sensor

Type of Detector Multi-gas, up to 5Available Sensors 18Compatible Sensors CO2, HS, EX 3, OX, NO, ND, SO, CL, AM2, HY, CN, CD, MM, PH, MO, PDApproximate Battery Life NiMH–16 Hours, AA–24 Hours (Diffusion) NiMH–12 Hours, AA–16 Hours (Pump)Readings Real Time, Peaks, STEL, TWACalibration YesPump Yes (optional internal pump)Data Logging Yes–(optional 5 months of data)Intrinsic Safety CSA - Class 1, Div. 1, Groups, A, B, C, D; T3RF/EMF Shielded 4 RF/EMFIngress Protection Not RatedOperating Temperature -4 ºF to122 ºF (-20 ºC to 50 ºC)Operating Humidity 15–90% (non-condensing)

Cat. No. Description PriceA950R101MA Multi-Gas Detector 950 with NiMH battery, $ 2550.00 pump, and EX/OX/CO/HS sensors (calibrated to Methane)

Multi-Gas Calibration Gas Kit

The Kit includes one 34L of 10% LEL methane, 35 PPM carbon monoxide, 10 PPM hydrogen sulfide; one 715 regulator with 0.2 LPM; and one deluxe carry case.

Cat. No. Description PriceA933000023 Multi-Gas Calibration Gas Kit $ 590.00

3M Single Gas Detector110 Series Simplify gas detection and reduce maintenance costs with the 3M 110 Series, an innovative family of por-table, single-gas DETECTORS that are user-friendly and affordable. It can be easily clipped to your pocket, belt or hardhat to go where you go.

110 SeriesLightweight and compactEasy one-button operation85 decibel alarmLong-lasting lithium batteryThree alarm indicators: vibrating, audible, visual

3M Model 110 110XL. 110XLSType of Detector Single Gas Single GasAvailable Sensors 3 2 (110XL), 1 (110XLS)

Compatible Sensors CO, HS, OX CO, HS (110XL)

CO (110XLS)

Calibration No (CO & H2S), Yes (O2) YesPump No NoData Logging No NoIntrinsic Safety CSA(US) - Class 1, CSA(US) - Class 1, Groups A, B, C, D; T4A Groups A, B, C, D; T4ARF/EMF Shielded 4 RF/EMF RF/EMFIngress Protection IP54 IP54Operating Temperature -4 ºF to122 ºF -4 ºF to 122 ºF (-20 ºC to 50 ºC) (-20 ºC to 50 ºC)

Operating Humidity 15–90% 15–90% (non-condensing) (non-condensing)

Cat. No. Description PriceA110495101XL Single Gas Detector 110, $ 250.00 Carbon Monoxide (CO)

Authorized Distributor and Service Center of:


Ai

r 3M Multi-Gas Detector 740 Series 740 Series • Detect up to 4 gases simultaneously• Massive data-logging capacity• Easy replaceable sensor pack reduces maintenance costs• Runs on rechargeable lithium ion batteries or alkaline batteries

SpecificationsOperating Temperature -4 ºF to 122 ºF (-20 ºC to 50 ºC)Operating Humidity 15–90% (non-condensing)Hazardous area rating Intrinsically safe – Class 1, division 1, Groups A, B, C, and D ; T3 C22.2 ; CSA approvalData logging memory 1.2MB (6 months of data at 1 minute

intervals per 40 hours/week)

Ingress protection IP65Radio frequency protection <10% deviation of alarm level when subjected to 450 mHz, 5 watt radio at 2 feet

Gas sensor specificationsSensor Factory Default Display Reading Factory Factory Operating Alarm Level Range Resolution Default Default Temperature STEL Alarm TWA Alarm Range Level LevelCO 35 ppm 0 – 1500 ppm 1 ppm 200 ppm 35 ppm -4 to 122 ºFHS 10 ppm 0 – 200 ppm 1 ppm 15 ppm 10 ppm -4 to 122 ºFEX 10% LEL 100% LEL 1% LEL Not Not -4 to 122 ºF 0-5% v/v Applicable ApplicableOX 19.5% (Low) 0 – 25% 0.1% Not Not -4 to 122 ºF 23.0% (High) Applicable Applicable

Cat. No. Description PriceA740100400 Multi-Gas Detector 740, HS/OX/CO/EX, $ 695.00 (Methane) sensors.

3M Single Gas Detector 450 Series The 3M 450 Single Gas Detector is a portable single gas detector that delivers time and time again.

Its compact size, reliability, and flexibility with ten sensor options make the 3M 450 Series detector a smart choice.

The 3M 450 Series detector carries a standard two-year warranty on electronics and sensors CO, H2S, O2; one-year on toxic sensors. The unit’s high contrast numerical level display, LED alarm warning indica-tion, and buzzer indicate when the target gas reaches alarm set points.

SpecificationsType of Detector Single GasAvailable Sensors 10Compatible Sensors OX, CO, HS, CL, AM, SO, CN, NO, ND, HYSensors Replaceable YesAlarms Audible & Visual Alarm, Vibrating Alarm (optional)Battery LithiumReadings Real TimeCalibration YesIntrinsic Safety CSA (US) - Class 1, Groups A, B, C, D; T4Operating Temperature -4ºF to 122ºF (-20ºC to 50ºC)Operating Humidity 15-90% (non-condensing)

Cat. No. Description PriceA450450100 Single-Gas Detector, (OX) $ 439.00A450455100 Single-Gas Detector, (OX) $ 509.00 with Vibrating Alarm A450450101 Single-Gas Detector, (CO) $ 542.00A450455101 Single-Gas Detector, (CO) $ 613.00 with Vibrating AlarmA450455102 Single Gas Detector, (HS) $ 613.00 with Vibrating Alarm

GENEQ also has 3 other specialized departments for your instruments needs.

Biotechnology - Lab Equipment for Science Teaching, Food Quality Control and Biological Research

Materials Testing - Testing Equipement for Soil, Concrete, Asphalt, Coatings, Steels, etc.

Geomatics - GPS Systems and Surveying EquipmentYou can view all those products at www.geneq.com

431 800.463.4363

Ai

r

CO2 Analyzer Model TES-1370

SpecificationsMeasuring Range CO 2 : 0~ 6,000 ppmTemperature -20°C ~ 60°C (-4°F ~ 140°F)Humidity 10%RH ~ 95%RHResolution CO 2 :1ppm, 0.1°C / 0.1°F / 0.1%RHAccuracy CO 2 : ±3% of reading or ±50ppm, which is greater.Temperature ±0.5°C, ±0.9°FHumidity ±3%RH ( at 25°C, 30 ~ 95% RH ). ±5%RH ( at 25°C, 10 ~ 30% RH )Auto Memory Capacity Approx. 20,000 setsOperating Conditions 5°C ~ 50°C (41°F ~ 122°F) 10 ~ 90% R.H.• RS-232 function / Software. • Backlight display function.

Cat. No. Description PriceMTP1370-00 CO2 Analyzer $ 995.00 Model TES-1370

Economical Air Quality MonitorModel Falcon-II

• Measures CO2 and Temperature • Accurate and Reliable• Large LCD Display• Audible Alarm• Lightweight• Easy to use

SpecificationsOperating temperature 32 to 122°F (0 to 50°C) 0 to 95% RH, non-condensingStorage Temperature -4 to 140°F (-20 to 60°C)

Power Two power supply types:Battery type Alkaline, AA x 4 (80 hours)External 6 VDC from external AC/DC adapter which is included in packagePower requirements 160 mA peak, 15 mA average from 6V Sample Method Diffusion Display LCD : Independent CO2 and temperature readings. Calculates and displays ventilation rates Certifications CE Sensors CO2 (Carbon Dioxide): NDIR (Non-Dispersive Infrared)

Cat. No. Description PriceYESFALCONII Economical Air Quality Monitor $ 280.00 Model Falcon-II

Ozone Monitor Model C-30ZX

For water treatment plants, pulp bleaching mills, ozone generation monitor, photocopier and laser printer centers, fumigation projects, HVAC and indoor air quality systems, vehicular pollution monitors, research labs and pilot plants and wherever ozone expo-sure is possible.

The C-30ZX has a very fast and continuous response. It is rugged and versatile. There are no touchy controls.

Features• LED readout changes color as ozone level increases• Audio alarm and output for data logger• Connections for external equipment control• For general monitoring and ozone control• Many accessories available such as data loggers, calibrators and protective enclosures with heaters and 4-20 mA outputs

SpecificationsRange .02-.14 ppm of ozone (LED scale); 0.02-0.30 ppm via external data readoutBargraph Display Normally Green; Yellow at 0.05 ppm (caution); Red at 0.1ppm (danger)Response Time Within 10’s of seconds of ozone reaching the sensorMeasurement Principle HMOS (heated metal oxide semiconductor) sensorSize 85 x 35 x 60 mm (3-1/4 x 1-3/4 x 2-3/4 in.)Weight 140g (5oz)Power Requirements 12-24 volts DC at 300 mA. AC adapters available worldwideOutputs LED bargraph, audio alarm, 0-3v analog output such as for data loggers, and external alarm relay contacts. Alarm actuation and relay contact closure at .1 pm (standard) and is programmable.

Cat. No. Description PriceECC30ZX-00 Ozone Monitor $ 655.00 Model C-30ZX


Ai

r BACnet Gas TransmittersBST Series

Applications • Vehicle exhaust - parking garages, repair shops• Arenas - Ammonia, CO, NO2• Pools - Chlorine, Ozone• Food plants - Ammonia• and many more

Features• MS/TP BACnet communication• Adjustable baud rate• Available 4-20 mA output signal• Optional relay• Optional LED display• Thermal resetting fuse• LED indicator for power and alarm status• Simple calibration procedure

Operating temperature-20 to 40 °C sensor dependant (-5 to 104 °F sensor dependant)

Cat. No. Description PriceYOBST-0000 BACnet Gas Transmitter Price on request

VOC’s PID Detector Model PhoCheck 3000EX

Monitors leaks or contamination of volatile organic compounds such as acetone, octane, benzene, toluene and many more. These VOCs are present in refineries, chemical industries and contaminated sites.

• Range: 0.1 ppm to 10,000 ppm and/or 0.1 up to 10,000 mg/m3• Accuracy: ±5% of the reading• Audible and visual alarm• Intrinsically safe according to BASEEFA• Value of the “personal exposure level”, TWA and of the STEL for over 250 gases and compounds• Records 20,000 readings (with dates and times)• Power: 4 x AA cells (model with rechargeable batteries available)• Post treatment software and carrying case included

Cat. No. Description PriceION3000EX- Portable PhotoIonization Detector, $ 4395.00 Model PhoCheck 3000EX

Biogas and landfill single / multi channel gas analyzer Model GFM100

Applications• Compost monitoring• Landfill hydrogen sulphide monitoring (0-5000ppm)• Biogas monitoring• Combustion detection (CO)• CO2 bulk storage monitoring• Laboratory analysis• Blended beer gas monitoring• Incubator monitoring• Research• Modified atmosphere monitoring• Mushroom farming

Specifications GFM100 GFM110 GFM120 GFM130Common features Single One I/R One I/R 1 to 7 gas channel only and one (1) and two (2) capability gas expansion gas expansionCarbon dioxide Choose from Choose Choose ONE Choose frominfra red ONE (1) ONE I/R I/R and TWO UP TO SEVENreading range of the below and one of of the below (7) of the the below below NOTE: Only 1 I/R0 – 10000 ppm • • • •0 – 10% • • • •

Expansions availableOxygen 0-25% • • • •CO 0-1000 ppm • • • •H2S 0-200 ppm • • • •

Cat. No. Description PriceGDGFM100-0 Single Channel Analyzer Price on requestGDGFM110-0 Dual Channel Analyzer Price on requestGDGFM120-0 Three Channel Analyzer Price on requestGDGFM130-0 Multi Channel Analyzer Price on request (up to 7 gas channels)


451 800.463.4363

Ai

r

Industrial/CommercialCombustion AnalyzerModel Testo 330-2

SpecificationsOperating temp range 23 to 113°FStorage/transport range -4 to 122°FPower supply lithium ion rechargeable, AC 6.3V/1.2ADimension 10 x 3.5 x 2.5 inchesWeight 1.5 poundsMemory 200 locationsDisplay Monochrome,160 x 240 pixelsBattery temp range 32 to 95°FBattery charge time >6 hours

Cat. No. Description PriceTE05633323 Industrial/Commercial $ 3240.00 Combustion Analyzer Kit

Digital AC and Refrigeration System Analyzer Model Testo 523

Features• Real-time superheat and subcooling readings• Confidently charge at outdoor temperature down to 55°F• 30 “P/T charts” built-in• Digital readout of temperatures and pesssures• One button MIN/MAX/HOLD• Built-in lockable Carabineer/type hook• Backlit sight glass• 3-port, 2 valve manifold (1/4 SAE)• Prints all data to Testo printers• Operating range 368/735 PSI low/high sides• Compatible with all refrigerants except ammonia

SpecificationsPressure range 368/735 PSI low/high sides (25/50 Bar)

Pressure resolution 0.1 PSI (0.1 Bar)

Pressure overload 735/1470 PSI low/high sides (50/100 Bar)

Line temperature input 1, Pt 100Temperature -58 to 392°F (-50 to 200°C)

measurement rangeTemperature resolution 0.1°F (0.1°C)

Cat. No. Description PriceTEO5635237 Digital AC/Refrigeration System Analyzer $ 1050.00 Model Testo 523 (RSA Kit)

VelociCalc Thermal AnemometerModels 9535 and 9535A

SpecificationsVelocityRange 0 to 6,000 ft/min (0 to 30 m/s)Accuracy ±3% of reading or ±3 ft/min (±0.015 m/s), whichever is greaterResolution 1 ft/min (0.01 m/s)Duct Size Dimensions 1 to 250 inches in increments of 0.1 in. (1 to 635 cm in increments of 0.1 cm)

Volumetric Flow RateRange Actual range is a function of velocity, and duct sizeTemperature Range 0 to 200 °F (-17.8 to 93.3°C)(9535 and 9535-A)

Accuracy ±0.5°F (±0.3°C)Resolution 0.1°F (0.1°C)

Cat. No. Description PriceTSI9535-00 VelociCalc Thermal Anemometer, $ 1165.00 Model 9535TSI9535A-0 VelociCalc Thermal Anemometer, $ 1360.00 Model 9535A

VelociCalc Multi-Function Thermal Anemometer Models 9555 and 9555A

Applications• HVAC commissioning and troubleshooting• Clean room certification • Testing and balancing• Ventilation evaluations • Thermal comfort studies• IAQ investigations • Process air flow testing

SpecificationsVelocity (TA Probe)Range 0 to 9,999 ft/min (0 to 50 m/s)Accuracy ±3% of reading or ±3 ft/min (±0.015 m/s), whichever is greaterResolution 1 ft/min (0.01 m/s)

Temperature (TA Probe Models 964, 966, 980, 983)Range 14 to 140°F (-10 to 60°CAccuracy ±0.5°F (±0.3°C)Resolution 0.1°F (0.1°C)

Cat. No. Description PriceTSI9555-00 VelociCalc Multi-Function $ 2695.00 Thermal Anemometer, Model 9555 TSI9555A-0 VelociCalc Multi-Function $ 2895.00 Thermal Anemometer, Model 9555


Ai

r Thermo-Anemometer DataloggerModel DTA4000

• Store up to 1000 temperature and airflow readings• Highly accurate, rugged, all metal probe and vane• Ultra low speed sensitivity down to 40Ft/min.• Measuring airflow in extreme environments from -20°C to 100°C• Optional temp probe provides measurement from -95° to 200°C• Minimum and Maximum air speed and air temperature• Analog outputs (0 to 2 Volts)• RS232 communication interface

Specifications

Air VelocityProbes APT275 40 - 7800 FPM (0.2 to 40.00 MPS) Probe APT100 60 - 6800 FPM (0.3 to 35.00 MPS) Temperature (using either air velocity probe head): -22° to 212°F (-30° to 100°C)Temperature (using separate temperature probe): -100° to 575.0°F (-100° to 300.0°C)AccuracyAir Velocity ±1.0% of Reading ±1 digitTemperature ±0.2% of Reading ±1 digit

ResolutionAir Velocity 1 FPM or 0.01 MPSTemperature 0.2°F or 0.1°C

Operating Temp Instrument 32° to 125°F / 0° to 50°CProbe -22° to 212°F /-30° to 100°C

Cat. No. Description PricePADTA4000- Digital Thermo-Anemometer, $ 1125.00 with Data Acquisition Model DTA4000

Digital Manometer Model Testo 510

• Display in Pascal optional over entire measurement range• Accuracy: ±0.01“ H20 (0 to 0.12“ H20) / ±0.02” H20 (0.13 to 0.4” H20)

• Temperature compensation• Magnetic back permits free-hand work• Flow velocity measurement with Pitot tube (Pitot tube not included in delivery)

• Air density compensation• Protective cap for safe storage• Including wrist strap and belt clip

SpecificationsOperating temperature 32 to +122 °FBattery type 2 Type AAA batteriesBattery life 50 hrDimensions 4.5 x 1.7 x 1 inProbe Type Differential pressureMeas. range 0 to 40.15 inH2OAccuracy ±0.01 inH2O (0 to 0.12 inH2O) , ±0.02 inH2O (0.12 to 0.4 inH2O)

±(0.04 inH2O + 1.5 %of rdg.) (0.41 to 40 inH2O)

Resolution 0.01 inH2O

Cat. No. Description PriceTE05600510 Digital Manometer, Model Testo 510 $ 235.00

Pressure Data Logger Model PR125

• Display with Min/Max option, Unit of Measure Indicator, Low battery Indicator and much more.• USB-enabled triple speed downloading• 1-second sampling rate• IP68 case• FLASH card option• 0-100 PSI• User replaceable battery• Pressure sensor includes built in diaphragm seal.

SpecificationsPressure Range 0-300 PSIPressure Accuracy ±1% of full scaleAmbient Operating Conditions -22 to +176°F (-30 to +80°C); 0 to 100% RHDownload type USB or Flash memory cardData Capacity 64,000, 16-bit SamplesSample Interval 1 second to 24 hours (user selectable)Sample Storage Rate Storage rate until logger is full may vary, dependent upon selected Sample Interval.Display LCD

Cat. No. Description PriceDIPR125-00 Pressure Data Logger $ 625.00 Model PR125


471 800.463.4363

Ai

r

DAVM + Digital Air Flow Volume MeterModel DAVM+ Applications• Identify Air Flow Problems • Air Balancing• Air Quality • Measure Light Levels

Features • Measures Feet per Minute (FPM) and Cubic Feet per Minute (CFM)• Measures Temperature and Humidity• °F/°C Selectable• Standard K-Type Thermocouple Connector• Measures Light Levels (LUX)• Multi-Channel Display• Data Hold• One-Hand Operation• Carrying Case (SCASE) Included

SpecificationsDisplay LCDMeasurement Anemometer, Humidity, Temperature, Light, Air flow (CFM/CMM).Operating Max.Humidity 80% RHOperating Temperature 32° to 122°F (0 to 50°C)

Cat. No. Description PriceSUDAVM-000 Digital Air Flow Volume Meter Model DAVM+ $ 235.00

Light Meter Pro Model 1339

SpecificationsDisplay Dual display 4 digit LCD read out.Measuring Range 99.99, 999.9, 9999, 99990, 999900 Lux(1 fc = 10.76 Lux) 9.999, 99.99, 999.9, 9999, 99990 fc Auto ranging (5 step)Overrange Display OL is displayedResolution 0.01 Lux, 0.001 fc Accuracy ±3% rdg ±5dgt (Calibrated to standard incandescent lamp, 2856°K)

CIE photopic f ’1 6% Temp. Characteristics ±0.1% / °CMeasuring Rate Approximately 5 time/sec Photosensor Silicon photodiodes Data Memory Capacity 50 sets. (Direct reading from LCD display) Operating Conditions 0 to 50°C <80% RH / -10 to 60°C<70%RH

Cat. No. Description PriceMTP1339-00 Light Meter Pro $ 259.00

Light Meter Model Testo 540The sensor of the Testo 540 is similar to the spectral sensitivity of your eye which makes it ideal for measuring actual light intensity. The 540 features a convenient hold function and displays max/min values on a large backlit display. It’s a handy, strong and easy to operate meter.

Features• Incl. calibration certificate• Protective cap for safe storage• Including wrist strap and belt clip

SpecificationsOperating temperature 32 to +122 °FBattery type 2 Type AAA batteriesBattery life 200 hrDimensions 5 x 1.7 x 1 in.Probe type LuxMeas. range 0 to 99.999 LuxAccuracy ±3 %Resolution 1 Lux (0 to 19.999 Lux), 10 Lux (remaining range)

Cat. No. Description PriceTE05600540 Light Meter, Model Testo 540 $ 210.00

Seven Channel Air Quality MonitorModel YESair • Measures temperature, RH plus• Add up to five additional sensors internally• All five sensor positions are plug and play • Largest assortment of sensors on the market• LCD displays all sensors, internal sample pump• High capacity information recording to flash card• Internet accessible option, network option• Terminal software available

SpecificationsDisplay Large, multi-line, backlit LCD. All installed sensors indicated at one time plus battery status, recording status

Sensors Standard sensors: Temperature RH sensor sensor

Optional sensors: CO2 Electrochemical Catalytic PID Small plug & play Infrared Toxic gas/ Combustible TVOC’s Oxygen gas

ppm or 24 gases 1 range 2 ranges % volume available available available

Information 12 bit, multi-channel, user configurable with removable flash card Communication Miniature USB port for downloading recorded information and auxiliary port for uploading from plug-in probes

Cat. No. Description PriceYESAIRNA-0 Seven Channel Air Quality Monitor $ 1610.00 Model YESAIR North America “Basic”YESAIRLGRP Logging package for YESAIR, $ 125.00 includes basic 512MB to 1G flash card, USB interface cable, terminal software


Ai

r Solar Power Meter Model TES-1333

Applications• Meteorology • Agriculture• Solar radiation measurement• Solar power research• Physics and optical laboratories• Solar transmission measurement• Identify high performance windows

SpecificationsDisplay 3-1/2 digits. Max. indication 1999Range 200 W/m2 634Btu / (ft2 x h)Resolution 1W/m2 1 Btu / (ft2 x h)Spectral response 400-1100nmAccuracy Typically within ±10W/m2 [±3 Btu / (ft2 x h)] or ±5%, whichever is greater in sunlight; Additional temperature induced error ±0.38 W/m2/°C [±0.12 Btu / (ft2 x h)/°C] from 25°CAngular accuracy Cosine corrected <5% for angles < 60°Drift <±2% per yearCalibration User recalibration availableOver-Input Display shows “OL”Sampling Time Approx. 0.4 secondManu Data Memory 99 setsand Read Auto Data Memory 32000 sets (TES-1333R)

Cat. No. Description PriceMTP1333-00 Solar Power Meter, Model TES-1333 $ 125.00

ElectroSmog Meter Model TES 92

Features • 50 MHz to 3.5 GHz frequency range• For isotropic measurements of electromagnetic fields• Non-directional (isotropic) measurement with three-channel measurement probe• High dynamic range due to three-channel digital results processing• Configurable alarm threshold and memory function• Easy to use

SpecificationsSensor Type Electric field (E).Frequency Range 50MHz to 3.5GHzMeaurement range (CW signal > 50MHz) 38mV/m to 11V/m. 3.8μW/m2 to 320mW/m2Absolute error (at 1V/m and 50MHz) ±1.0dBOverload limit 4.2W/m2 (40V/m)Temperature response (0 to 50°C) ±1.5db

Cat. No. Description PriceMTPTES92-0 ElectroSmog Meter Model TES 92 $ 255.00

EMF Tester Model TES-1390 Features• Measures EMF (ElectroMagnetic Field) Strength

• Range: 200 / 2000 milli Gauss, 20 / 200 micro Tesla • Peak Hold function

SpecificationsDisplay 3-1/2 digits. Max. indication 1999Range 200 / 2000 milli Gauss, 0.01 / 0.1 micro TeslaResolution 0.1 / 1 milli Gauss, 0.01 / 0.1 micro TeslaNumber of Axis Single axisBand Width 30 Hz to 300 HzAccuracy ± (3% + 3d) at 50Hz / 60HzOver-Input Display shows “OL”Sampling Time Approx. 0.4 secondBattery 4 pcs size AAA (Alkaline Battery)Battery Life Approx. 60 hoursOperating Temp 0°C to 40°C (32°F to 104°F) below 80%RHand HumidityStorage Temp -10°C to 60°C below 70%RHand Humidity

Cat. No. Description PriceMTP1390-00 EMF Tester, Model TES-1390 $ 145.00

Handheld Digital Radiation DetectorModels Inspector + and Inspector EXP+ Now with an adjustable alert, the Inspector+ is a small, handheld, microprocessor-based instru-ment which offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays. The digital readout is displayed with a red count light and a beeper sounds with each count detected. Now with a selectable alert, the Inspector EXP+ was designed for the requirements of emergency response personnel. It has the same valuable features, small size, and quality of the Inspec-tor, but instead of the built-in detector, it has the added versatility of an external probe.

SpecificationsAlert Set Range : mR/hr .001 - 50 and CPM 1 - 160,000. 70db @ 1m. Count Light, Red LED flashes with each radiation event.Power Requirements : One 9-volt alkaline battery. Battery life is 2160 hours at normal background.Temperature Range : -10ºC to 50ºC (14ºF to 122ºF)

Cat. No. Description PriceSEINSPECT- Handheld Digital Radiation $ 830.00 Detector Inspector+SEINSPECEX Handheld Digital Radiation $ 1085.00 Detector Inspector EXP+

491 800.463.4363

Ai

r

Radiation Monitor and AlarmModel RadAI-1

The RadAl™-1 wall mount radiation monitor and alarm was specifically designed to identify radioactive substances, either lost or misappropriated with criminal intent. It can thus help protect from the consequences of il-legal trafficking in radioactive sources and from the radiological risk caused by the widespread presence of radioactive substances in the environment.

Characteristics• Compact, rugged, economical• Easy installation• Self-calibration without using radioactive sources• Sensitive to energies as low as 25 keV• Relay output• No adjustments, no maintenance

Applications• State borders and road check points• Airports, ports, railway and bus stations• Public, corporate and military buildings• Banks: safe deposit boxes and caveaux• Hospitals (radiotherapy units) and Universities• Waste incineration and disposal plants• Radiological protection of any area subject to ABC terrorist threat

SpecificationsDetectors Geiger-Müller tube(s), L= 230 mm, D = 20 mm (9” x 0.75”)Sensitivity 12 cps/μGy/h/tube = 12 cps/μGy/h/tube = 120 cps/mR/h/tubeAlarm Level Automatic, as low as 20 nGy/h (2 μR/h)Response Time Automatic, from 1 second to 10 minutesCalibration Automatic, uses ambient backgroundPower Supply 115 Vac (nominal), 50 - 60 Hz (with 100 mA fuse)

Each RadAl™-1 unit is delivered with a 1.8 m (6 ft) power cord (Standard Central European or US, specify at order) and two expansion screws for wall mounting. A 6 mm (1/4”) drill bit and a drilling machine may be required for installation. Specifications are for models with one GM tube. Models with 4 GM tubes (RadAl™-1/4 and RadAl™-1-WP/4 have twice the sensitivity and speed.

Cat. No. Description PriceRADAI11-00 Wall Mount Alarm, one GM Tube $ 3200.00RADAI12-00 Wall Mount Alarm, two GM Tubes $ 3600.00RADAI14-00 Wall Mount Alarm, four GM Tubes $ 4500.00

Integrating-Averaging SoundLevel Meter and Real TimeSpectrum AnalyzerModel SC310

Performance • Type 1 integrating sound level meter• Real time spectrum analyzer, octave bands 31.5 Hz to 16 kHz and third octave bands 20 Hz to 10 kHz• Real time room noise evaluation by NC curves• Measures all parameters simultaneously with freq. weightings A, C and Z• One single range

Applications• Measurement of parameters to guarantee the hearing protection• Acoustic insulation in third octave bands

Measurement range Limits 23 - 137 dBAFrequency weighting Frequency weightings A, C and ZOctave filters • Type 1 meeting IEC 1260:95 • Nominal octave bands central frequency: 31.5 Hz ÷ 16 kHz • Nominal third octave bands central frequency: 20 Hz ÷ 10 kHzSupplied accessories FNS030 Case PVM05 Wind screen SFT030 Software CN1US Cable USB 2 1.5 V AA battery

Cat. No. Description PriceSCSC310-00 Integrating-Averaging Sound Level Meter and $ 7595.00 Real Time Spectrum Analyzer Model SC310



Ai

r

Datalogging Sound Level Meter Model TES-1352A

Features• RS-232 interface • Data logging function (16K) • Autoranging • 0.1db Resolution • Range from 30 to 130db • Maximum hold function • A & C Frequency Weighting • Fast & Slow dynamic characteristics models • Real time clock with calendar

SpecificationsAccuracy ±1.5dBMeasurement Frequency Range 31.5Hz - 8KHzMeasurement Level A weighting 30dB - 130dBMeasurement Level C weighting 30dB - 130dBLevel range 6 ranges in 10dB step • 30~80dB, 40~90dB, • 50~100dB, 60~110dB, • 70~120dB, 80~130dB, Autorange 30~130dBTime weight Fast and SlowDynamic range 60dBLinearity range -50dBDigital Display 4 digit LCD, 0.1dB resolution upgraded envery 0.5s.

Cat. No. Description PriceMTP1352A-0 Datalogging Sound Level Meter $ 675.00 Model TES-1352AMTPPS102-0 Power Supply Adaptor 6VDC $ 30.00MTPTLF47A- Extension Cable 5m $ 105.00

*Traceable calibration certificate available on request.

Sound Level CalibratorModel TES-1356

Features• 94dB and 114dB Sound Calibration at 1KHz • Accurate and Simple to use • Fits 1”, 1/2” or 1/4” diameter microphone

SpecificationsOutput Sound 114dB and 94dB re 20 uPa under reference conditionsOutput Frequency 1000Hz ±4%Reference Conditions • Temperature: 23 °C • Atmospheric Pressure: 1013 mbar (760mm of Hg) • RH: 65% Accuracy of Sound Under stated reference environment conditionsPressure Level +/- 0.5 dB

Cat. No. Description PriceMTP1356-00 Sound Level Calibrator $ 495.00

HygroMaxx High quality air humidity and temperature instrument

The hygromaxx product range is suitable for the following applications : • Industrial HVAC installations• Clean rooms• Green houses, Tunnel installations• Paper, textile industry• Agriculture, meteorological monitoring• Painting, printing industry• Hospitals, sport facilities• Packing industry• Laboratories, calibration labs and many more

SpecificationsMeasurement range Humidity: 0 to 100 % RHTemperature -20 to 80°CRepeatability Humidity: +/- 1.0 % RH, Temperature: +/- 0.1°CAccuracy Humidity: +/- 1.5 % RH , (after 3-point calibration)

Temperature: +/- 0.1°C

Cat. No. Description PriceNO2523054- HygroMaxx S $ 365.00

511 800.463.4363

Ai

r

Humidity and Temperature Transmitters for Industrial ApplicationsHMT330 Series

SpecificationsPerformanceRelative HumidityMeasurement Range 0 to 100% RHAccuracy against factory standards including non- linearity, hysteresis and repeatability at +20°C ± 1 %RH (0 to 90 %RH) ±1.7 %RH (90 to 100 %RH) at -20 to +40°C ± (1.0 + 0.008 x reading) %RH* at -40 to -20°C, +40 to +180°C ± (1.5 + 0.015 x reading) 90WFactory calibration 0 to 40 %RH: ± 0.6 %RHuncertainty** (+20°C) 40 to 97 %RH: ±1.0 %RHHumidity sensors for typical Vaisala HUMICAP 180applicationsHumidity sensors chemical Vaisala HUMICAP 180Cpurge/warmed probeHumidity sensors high Vaisala HUMICAP 180L2*chemical concentrations** For Vaisala HUMICAP 180L2 sensor at -10 to +40°C ± (1.0 + 0.01 x reading) %RH; at -40 to -10°C,+40 to +180°C ± (1.5 + 0.02 x reading) I/O RH** Defined as +2 standard deviation limits. Response time (90 %) at 20°C in still air with grid filter: 8 s; with grid + steel netting filter: 20 s; with sintered filter: 40s

TemperatureMeasurement range • HMT331: -40 +60°C • HMT333: -40 +80°C • HMT334, HMT335, HMT337, unit HMT338: -70 +180°C Accuracy at +20°C 0.2°C

Cat. No. Description PriceVAHMT331-0 Humidity and Temperature Transmitter From $ 2100.00 For wall mounting VAHMT333-0 Humidity and Temperature Transmitter From $ 1695.00 For duct mounting and tight spacesVAHMT334-0 Humidity and Temperature Transmitter From $ 3250.00 For high pressures up to 100 bar and vacuum conditions

Precision Psychrometer Model 1368

Features• Fast Response Time %RH: 10S (90% at 25ºC still air) • High accuracy • Dew Point Temperature • Wet Bulb Temperature • Resolution 0.01%RH, 0.01ºC/0.01°F • Max Hold and Data Hold Function • Micro Processor-based Design • Dual Display Temperature & Humidity • Auto Power Off, Disable Sleep Mode • Backlight • Mini Size

Function Range Best accuracy Max. ResolutionDewpoint -30°C to 100°C / ±0.5°C/0.9°F 0.01°C/°F -22°F to 199°FWet Bulb 0°C to 80°C / ±0.5°C/0.9°F 0.01°C/°F 32°F to 176°FHumidity RH 0 to 100% ±2.0% 0.01%

Cat. No. Description PriceMTP1368-00 Precision Psychrometer $ 125.00 Model 1368

Heat Stress Monitor Model RSS-214

• 3M WBGT is the reference in the field• Measures WBGT, WB, DB, GT Vernon Globe• Accuracy: ±0.4°C, resolution: 0.1°C• Intrinsically safe CSA STD C22.2• Dust and splash-proof construction• Supplied with water bottle, wet bulb kit, 9V Ni-Cd battery, charger, and carrying case• Model available with memory (optional)

Cat. No. Description PriceA3201000-0 Heat Stress Monitor $ 2150.00 Model RSS-214



Ai

r

Thermal Imager Model Testo 880

Mobile Thermal Imagers scan equipment or buildings, and transform infrared radiation into visible thermal images with which a qualitative and quantitive analysis of temperature can be conducted. Thermal imagers are of great significance in preventive service and maintenance, but also in building and production monitoring, as well as in technical diagnostics. A thermal imager detects anomalies, thus making the search for errors and the early implementation of correctional measures possible. It checks materials and components completely without any damage and exposes problem zones before a malfunction can occur.

Features• High-quality wide angle lens 32° with F1 optics • Image refresh rate 33 Hz • Detector 160 x 120 interpolated to 320 x 240 pixels • NETD <0.2°F (< 0.1°C) • Manual focus • Minimum focus distance 3.9” (10 cm) • 1 GB SD included (approx. 800-1.000 images)

SpecificationsDisplay 3,5” LCD with 320 x 240 PixelStorage temperature -30 to +60 °CPressure range -1...300 barOperating temperature -15 to +40 °CBattery life 3 to 4 hWeight 900 gDimensions 152 x 106 x 262 mmMaterial/Housing ABSMeas. Range -20 to +100 °C, 0 to +350 °CAccuracy ±2 °C, ±2% of mv

Cat. No. Description PriceTE8801-000 Thermal Imager $ 6995.00 Model Testo 880

Moisture Measurement SystemModel MMS Plus

For effective cleaning and restorationThe moisture you can’t see matters most when cleaning and restoring a property after water damage caused by storm, floor or fire. From hidden mold to unseen structural damage, undetected moisture risks health and property. Its oversight can create liability. That’s why the right moisture meter makes the difference.

Features• Automatic grains-per-lb calculations for specific humidity• Data-logging with PC interface • Interchangeable Hygrostick probes*• Optional low range RH probe from 0-40% RH*

* The use of two sensors rather than one for the entire humidity range ensures accuracy at either end of the spectrum

SpecificationsIncludes as Standards MMS Plus includes with grains/lb automatic calculation, data download software with cable, Hygrostick, surface temperature sensor, 5 in. deepwall probes, pin moisture probe, Hygrostick extension lead, wood calibration chart, calibration check device, spare pins, instructions, nylon pouchGross Weight 10.58 oz (300g) instrument only 2.5 lb complete kitMax Needle Depth 0.4 in. (10 mm)Measurement Range Pin 6-99 (% WME)Hygrostick (RH) Nominal 20-100% RH, 32-122°F (0-50°C)Temp. Probe Range Nominal 15-120°F (-10 to 50°C)Hygrostick Data Nominal 30-40% RH ±2.5% RH 41-98% ±1.75% RH 0.5-122°F (-18 to 50°C)±0.6°F (0.3°C)Low Range RH Sensor Nominal (Optional MMS Plus Only: 0-40% RH ±2%, Temp. 32-104°F ±0.6°F (0-40°C ±0.3°C))Data Storage Store up to 1000 results with date and time stamp from all instrument functions

Cat. No. Description PricePRBLD5800L MMS Plus 3 in 1 Moisture $ 1350.00 Measurement System

531 800.463.4363

So

il

ORS Filter Bucket for Hydrocarbon Recovery

Ideal to Recuperate Hydrocarbons in Wells, Sump Pits and TrenchesWhen deposited on the surface, this bucket filter starts absorbing only the surface product through its hydrophobic screen.

• 2 liter capacity• Polyethylene construction• Dimensions (HxL): 16 x 10 in.

Cat. No. Description PriceKEBUCKET-0 ORS Filter Bucket $ 1699.00

Bioremediation Tool iSOC

Advantages• Accelerates site closure through enhanced natural attenuation as a primary remediation strategy or as a polisher• Delivers 40 to 200 PPM DO depending on iSOC® depth• Installs in existing 2-inch (50mm) monitoring wells• Application not limited by iron fouling under most conditions• Connects to standard gas cylinder• No power requirements, off-gases, pumps, or hazardous by-products• Small, simple, efficient, predictable, easy to use, & very low O&M

Typical Gas Concentrations (ppm)Gas Type Water Column Depth (ft/m) 5’/1.5 10’/3 15’/4.6 20’/6.1 50’/15.2Oxygen 42 55 62 69 111Methane 22 30 33 37 59 Propane 66 88 99 110 175Hydrogen 2 2 3 3 5Ethane 57 75 85 95 1 50

Cat. No. Description PriceINISOC-000 Bioremediation Tool iSOC $ 4500.00

CLOR-D-TECT Q4000Quantitative Chlorine Screening of Used Oil

CLOR-D-TECT Q4000 under USEPA SW-846 Method 9077 quantifies the chlorine level of used oil between 200 - 4000 ppm. The kit has been proven invaluable when different oil lots are blended or when the user must know how close a quantity of waste oil is to the 1000 ppm or 4000 ppm action level.

Cat. No. Description PriceDEXQ4000-0 Clor-D-Tect Q4000, 20 kits $ 375.00

Clor-D-TECT 1000 On-Site Screening Of Used Oil

CLOR-D-TECT 1000 under USEPA SW-846 Method 9077, provides a “go, no-go” result at a level of 1000 ppm chlorine. Used oil transporters, generators and facilities that recycle or re-refine used oil can incorporate Clor-D-Tect 1000 into their management of waste oil to prevent costly hazardous waste from being mixed with non-contaminated oil.

Cat. No. Description PriceDEXD1000-0 Clor-D-Tect 1000, 10 kits $ 175.00


So

il

PetroFlag Hydrocarbon Test Kit for Soil

• Useful for remote sites• With one single 10g sample, PetroFlag quantifies the content of crude oil, oil or gasoline• Permits on-site sample analysis of soil contaminated by hydrocarbons• Supplied with 10 reagents, 2 calibration standards, one mini electronic scale, one stopwatch and one carrying case

Cat. No. Description PriceDEXPFMTR01 Complete PetroFlag kit $1095.00DEXPFSRP10 Replacement reagents, box of 10 $235.00DEXPFCAL-0 Calibration standard, box of 12 $225.00

CLOR-N-OILPCB Screening Kits For Electrical Insulating Fluids

Designed to be used in the field, Clor-N-Oil is a fast, accurate method to test electrical insulating fluids for the presence of PCB. Each pocket-sized kit contains everything necessary to perform the test in less than 5 minutes. All premeasured reagents are sealed in glass ampules for safe, fast, consistent and accurate results.

Cat. No. Description PriceDEXCL020-0 Clor-N-Oil 20 ppm, 10 kits $ 175.00DEXCL050-0 Clor-N-Oil 50 ppm, 10 kits $ 175.00DEXCL0500- Clor-N-Oil 500 ppm, 10 kits $ 175.00

HydroScout Analyzer System for Used Oil

The palm sized HydroSCOUT meter is programmed to determine water content in used oil over two common ranges.

«Program A» covering the range 0 - 20 % can determine water content down to 0.15% (1500 ppm), v/v. Using the available dilution vials, «Pro-gram B» can measure water content up to 100%.

Results are displayed in volume percent on a LCD. The meter is menu driven for ease of use. Both programs auto-calibrate and perform quality control checks to minimize false negatives and ensure accuracy.

Cat. No. Description PriceDEXHSMTR01 HydroScout Analyzer Kit $ 825.00

Hanby Hydrocarbon Water Test Kit

The Handy Method for Water Analysis• Pour a 500 ml water sample into the separatory funnel• Add solvent and extract• Drain extract into test tube • Add catalyst and shake • Compare with standard

The Hanby Method has been utilized at oil and fuel spills and water remediation facilities around the world.

Cat. No. Description PriceHANFTKW-00 Hydrocarbon water test kit $ 1260.00

551 800.463.4363

So

il

Flighted Auger Kits

Quickly Drill Access Holes The AMS 2” flighted auger kit is equipped to drill access holes up to 9’ deep. The included 1 1/2” x 6” soil core sampler may then be used to col-lect soil samples in liners. Additional extensions may be added to obtain deeper depths.

Kit IncludesBosh 11254, 5/8” threaded male to SDS Max adapter, 1 1/2” x 6” soil core sampler, slide hammer, 2” flighted lead auger with hard surfaced tip, 2” carbide tip, two (2) 2” x 3’ flighted extensions, universal slip wrench, 1 1/2” x 12” nylon brush, deluxe carrying case

Cat. No. Description PriceAMS20963-0 2” SST Flighted Auger Kit $ 4150.00

Environmental Soil Sampling Kit

All Stainless Steel for Environmental SamplingUsed in soils with low levels of contaminants or where equipment will be cleaned using an acid bath technique. All components are in stainless.

Includes Regular, sand and mud augers, cross handle, split soil core sampler, slide hammer, three 4’ extensions, plastic liner, plastic end caps, wrenches, and cleaning brush in a rugged, foam-padded hard-sided AMS deluxe carrying case with handles and wheels.

Deluxe Kit also Includes25 plastic liners, 50 plastic end caps, 50 fluoropolymer swatches for enhanced core sealing and a #2 AMS stainless steel scoop.

Cat. No. Description PriceAMS20956-0 3 1/4” Deluxe Environmental Kit $ 2695.00

Infiltrometer Set Model 142000

The infiltration is done by placing a circular shaped hood filled with water directly on the soil surface. Thus, no contact layer on the soil surface is necessary. The pressure head in the water filled hood is regulated by a “Mariotte“ water supply. The effective pressure head at the soil surface can be adjusted between zero and any negative pressure up to the bubble point of the soil. For calculation of the hydraulic conductivity after WOODING’s equation (steady state infiltration) two hoods are used with a ratio of 2: 1 in terms of the covered infiltration area at the soil surface.

SpecificationsTension Range 0 ... water pressure 0 ... 60 hPaTension of measurement Resolution 0.1 hPaInfiltration Rate Min. 0.01 ml/min ... max. 20 ml/minMeasuring Range Ca. 1000 cm/d ... 0.01 cm/dWater Consumption Ca. 0.1 ... 0.5l per infiltration step

Additional Accessories• Tension chamber • Micro Data Logger for 2000 measuring values

Cat. No. Description PriceUGT142000- Infiltrometer Set Model 142000 $ 7310.00

Aquaterr Digital Soil Moisture, Temperature and Salinity Meters The Aquaterr 300 Series portable Soil Measurement instru-ments are widely used in rugged environments and are built to withstand industry abuse. A weatherproof cast aluminum enclosure houses the electronics and easy to read display.

SpecificationsModel Blue Brut M-300 T-300 EC-300Probe Length 30 inches 30 inches 30 inches 30 inchesProbe Diameter ½ inch ½ inch ½ inch ½ inchProbe Material Chrome Moly steel Aircraft Grade Stainless Steel Overall Length 36 inches 36 inches 36 inches 36 inchesMoisture Range *n/a 0 – 100% 0 – 100% 0 – 100%Temperature Range n/a n/a 40° to 150°FSalinity Range n/a n/a n/a Up to 2000 μS

Application Core soil sam- Deficit irrigation Composting Guard against pling for moisture scheduling, ET and early plan- yield loss and monitoring and audit programs, ting to keep poor plant quali- root examination, irrigation systems temperature ty. Track the sa- depth penetration monitoring. and moisture at linity of water of hard soil types. optimum levels. entering and leaving an area. Determine salt accumulation in the soil root zone.

Cat. No. Description PriceAQBR-00000 Core Soil Sampling Probe $ 155.00AQ300-0000 Soil Moisture Measurement Probe $ 895.00AQTEMP300C Soil Temperature/Moisture Probe $ 1025.00AQEC300-00 Soil Salinity/ Temperature/Moisture Probe $ 1495.00


So

il

Wireless Leaf and Soil Moisture Temperature StationModel 6345CS

The Complete Wireless Soil Moisture/Temperature Station 6345CS comes pre-packaged with four soil moisture Sensors and four temperature probes.

The Wireless Leaf and Soil Moisture/Temperature station 6345 comes without any sensors, allowing you to customize the sensors used in correla-tion with the station.

6420 Leaf Wetness Sensor Davis Instruments 6420 Leaf Wetness Sensor for use with our Wireless Leaf Wetness/Temperature Station. The Wireless Leaf Wetness/Temperature Station can support up to four leaf-wetness sen-sors. This sensor includes a 40’ (12 m) cable.

6440 Soil Moisture Sensor Davis Instruments 6440 Soil Moisture Sensor for use with our Wireless Leaf Wet-ness/Temperature Station. The Wireless Leaf Wetness/Temperature Station can support up to four soil moisture sensors. This sensor includes a 15’ (4.6 m) cable.

6470 Temperature Probe Davis Instruments 6470 Temperature Probe for use with our Wireless Leaf Wetness/Temperature Station. Wireless Leaf Wet-ness/Temperature Station can support up to four temperature probes. Includes a 15’ (4.6 m) direct-burial cable.

GeneralOperating Temperature -40° to +150°F (-40° to +65°C)Storage Temperature -50° to +158°F (-45° to +70°C)Current Draw 0.14 mA (average), 30 mA (peak) (from external power source)Solar Panel 0.5 WattsHousing Material UV-resistant PVC plastic

Cat. No. Description PriceDA6345CS-00 Complete Wireless Soil Moisture and $ 695.00 Temperature Station Model 6345CS DA6420-000 Leaf Wetness Sensor Model 6420 $ 140.00 DA6440-000 Soil Moisture Sensor Model 6440 $ 75.00DA6470-000 Temperature Probe Model 6470 $ 68.00

Field Scout Soil Moisture Meter Model TDR 300

• Eliminates guesswork before irrigation• Perfect for all types of soil• Unit: % of the volumetric water content• Resolution: 1.0%; accuracy: ±3%• Data Logger• Power: 4 AAA cells• Supplied with 12 or 20 cm probe• Can be connected to a GPS/DGPS system

Cat. No. Description PriceSP6430FS-0 Field Scout Soil Moisture Meter $ 1190.00 Model TDR 300

Guelph Permeameter Kit Model HSM-2100

The Guelph Permeameter is an easy to use instrument for quickly and accurately measuring in-situ hydraulic conductivity.

Accurate evaluation of soil hydraulic conductivity, soil sorptivity, and matrix flux potential can be made in all types of soils. The equipment can be trans-ported, assembled, and operated easily by one person.

Measurements can be made in 1/2 to 2 hours, depending on soil type, and require only about 2.5 liters of water. Measurements can be made in the range of 15 to 75 cm below the soil surface.

The Guelph Permeameter is a complete kit consisting of the permeameter, field tripod, well auger, well preparation and cleanup tools, collapsible water container, and vacuum test hand pump, all packaged in a durable carrying case. Meets ASTM D5126.

Cat. No. Description PriceHSM2100-00 Guelph Permeameter Kit $ 4175.00

571 800.463.4363

So

il

Advanced Agricultural Soil Testing Outfits Model AST This line of combination soil analysis outfits offers the finest visual color matching system available to today’s agronomist. Technically advanced reagent systems and unique extrac-tion procedures based on the Mehlich I extraction provide fast, simple and extremely accurate soil testing.

SpecificationsTest factor Range TestspH pH 4.5-8.0 100Nitrate Nitrogen 2.5-100 lbs/acre 100Phosphorus 15-150 lbs/acre 100Potassium L-H 120-200 lbs/acre 100Humus L-H 1-1/2%-8% 100(Organic matter)

Cat. No. Description PriceLAM5410-00 Macronutrients, pH and Humus $ 500.00 Model AST-5LAMR5410-0 Reagent refill $ 345.00LAM541201- Macronutrients, pH and Humus $ 1045.00 Model AST-15LAMR541201 Reagent refill $ 805.00

Soil Nitrate Quick Test Kit This kit utilizes the EM Quant Nitrate test strip and the Nitrachek meter to read extractable nitrate. The strip nitrate chemistry follows the ASTM D3867 testing procedure. A reaction pad on the strip develops a red-violet color, which is analyzed by the Nitrachek meter over the range of 5 to 500 ppm (mg/L) nitrate. The meter reads to 1 ppm nitrate. Approximate time to perform the test, after collecting and drying the soil sample, is 15 minutes.

Cat. No. Description PriceHAW955000- Nitrate Quick Test Kit $ 695.00HAWE10020- Nitrate Test Strip $ 69.00HAW050321- Extraction Powder with Chloride, $ 35.00 10 packets - prepares 10 pts.HAW140301- Nitrate-N Std. with Chloride, $ 19.50 10 ppm N03-N, 4oz., Kit instructions

POGO Portable Soil Sensor The POGO Portable Soil Sensor puts the power of the popular Stevens Hydra Probe II in the palm of your hand. Featuring Stevens Hydra-Mon PDA software, you are free to take soil measure-ments anywhere at any time, without the time requirements of setting up a permanent soil monitoring system.

Applications• Spot checking of soil• Golf & sports turf management• Precision agriculture/fertigation• Greenhouse applications• Agriculture research• Watershed management• Academic/classroom use• Laboratory research

Hydra Probe II SpecificationsTypical Measurements Range AccuracyDielectric Permittivity 1 to 80 where 1 = air ± 1.5% or 0.2 whichever is 80 = distilled water typically greaterConductivity 0.01 to 1.5 S/m ± 2.0% or 0.005 S/m whichever is typically greaterTemperature -10° to +65° C ± 0.1° C

POGO SpecificationsOperating Temperature -10° C to +65° CWater Resistance PROBE tolerates continuous full immersion in liquid DO NOT SUBMERSE BATTERY ENCLOSURE OR PDA!Probe Fully potted 304-grade stainless steel, shock resistant

Cat. No. Description PriceLS93633-00 POGO Portable Soil Sensor $ 1995.00 with PDA and software



So

il

Watermark MonitorModel 900M

The Watermark Monitor is a Data-Logger which automatically takes soil moisture readings. This reading history provides you with a vivid picture of the soil moisture profile your irriga-tion practices have created. This data can be evaluated to determine ways to improve the irrigation scheduling for optimum results. Individual Watermark sensor readings display on the Monitor and can be taken at any time manually. The In-Field display allows you to make on the spot checks, necessary for scheduling purposes while the Monitor is taking periodic readings to record the performance history.

Features• Automatically Reads Sensors• 8 Sensor Capacity• Reading Frequency from every minute to every day• Watergraph Software included• In-Field display of current reading • Download history to a computer• Outdoor mount• 9 Volt battery included• Complete with 8 sensors (1 temperature and 7 Watermarks)

Cat. No. Description PriceIR9000M-00 Watermark Monitor Model 900M $ 925.00

Compost Monitor Model OT-21

• Measures temperature and oxygen inside your compost piles• Perfect to monitor the evolution of microbial activity and to reduce composting time• Stainless steel temperature and oxygen combined probe• Oxygen range: 0 to 22%• Temperature: -18 to +100°C• Quick response time• Power: 9V battery• Available with 3, 4, 5 or 6-ft. probe

Cat. No. Description PriceDEMOT216-0 Oxygen and Temperature Monitor $ 1170.00 with 6 ft probe

Compost Thermometer

• Ideal for monitoring the interior temperature of compost piles• Stainless steel construction with 3 in. diameter dials• Temperature: -10 to +110°C X 1°C division

Cat. No. Description PricePTC79/24D- Compost thermometer, 24 in. stem $ 135.00PTC79/36DT Compost thermometer, 36 in. stem $ 165.00

Turf-Tec Infiltrometer Practical infiltrometer can be used for a variety of applications, including new development, soil analysis and agricultural. Water infiltration rates can be determined in as little as 15 minutes. Regular monitoring helps keep turf grass disease to a minimum and to adjust irrigation rates to maximize water use and minimize run off.

Cat. No. Description PriceTURFTEC-10 Infiltrometer $ 750.00

Root Scanner for Root MonitoringModel CI-600 The CI-600 Root Scanner is designed to scan living roots in the soil. It is operated by a laptop computer. To obtain an image, insert the scan head into a pre-installed clear tube, and start the scanning program on the computer. The scan head will automatically rotate a full circle creating a 21.59 x 19.56 cm size high resolution image of the soil and roots. Users can easily move the scan head to different depths to scan and move from tube to tube.

SpecificationsScanner Resolution Maximum 1200 dpi or up to 188 million pixelsOne Image Size 21.6 W x 19.6 L cm (8.5 W x 7.7 L in)Scan Speed 5 to 15 seconds depending on computers and the scanning resolutionInterface USB portPower Supply Computer USB portScan Head Dimensions 34.3 cm long x 6.4 cm diameterStandard Clear 6.4 cm inner diameter x 182.9 cm length Tube Dimensions (2.5 inches x 6 feet); custom lengths available upon request

Cat. No. Description PriceCICI6008-0 Root Scanning System Model CI-600B $ 17 535.00

591 800.463.4363

La

bo

ra

to

ry

Capillary Suction Time Model 304M CST

The capillary suction pressure generated by standard filter paper is used to “suck” water from the sludge. The rate at which water permeates through the filter paper varies depending on the condition of the sludge and the filterability of the cake formed on the filter paper. The CST is ob-tained from two electrodes placed at a standard interval from the funnel. The time taken for the water front to pass between these two electrodes constitutes the CST.

Specifications• Case dimensions: 22 x 16 x 7 cm • Each unit comprises of CST meter, perspex block assembly and stainless steel funnels, box of 200 filter papers

Cat. No. Description PriceTR304M-000 Capillary Suction Time Model 304M CST $ 3150.00

Coliform Indicator Testing Kit

The Model TC-5 is an easy-to-use, disposable 5-tube method to indicate the presence of Total Coliform Bacteria in a drinking water supply.

Cat. No. Description PriceLAM43616-0 Coliform Indicator Test Kit $ 25.00

COD Test Tube Heater

Specifications Temperature of Reaction 105°C or 150°C (221°F or 302°F)Temperature Stability ±0.5°CTemperature Range -10°C to 160°CCapacity 25 Vials (dia 16 x 100 mm), 1 receptacle for a stainless steel reference thermometerAccuracy ±2°C (@ 25°C/77°F)Warm-up Time 10-15 minutes, depending on selected temperatureOperating Mode Timed (0 to 180 minutes) or infinity modeBlock AluminumEnvironment 5 to 50°C (41 to 122°F)Power Supply HI 839800-01: 115 Vac; 60 Hz; 250 W(fuse protected) Dimensions 190 x 300 x 95 mm (7.5 x 11.8 x 3.7”)Weight approx. 4.8 kg (10.6 lb.)

Cat. No. Description PriceHI83980001 Test Tube Heater with 115 Vac power supply $ 815.00HI740216-0 Test tube cooling rack (25 tube capacity) $ 88.00HI740217-0 Laboratory Bench Safety Shield $ 75.00HI15100-00 Electronic Thermometer (°C) $ 62.00HI15101-00 Electronic Thermometer (°F) $ 62.00

COD Certified ReagentsModel HI 93754

COD reagents available

Cat. No. Method Range PriceHI9375425- EPA* 0 to 150 mg/L $ 45.00HI93754B25 EPA* 0 to 1500 mg/L $ 45.00HI93754C25 --- 0 to 15000 mg/L $ 45.00HI93754D25 Mercury-free*** 0.0 to 60 °C / 32.0 to 140 °C $ 45.00HI93754E25 Mercury-free*** 0 to 1500 mg/L $ 45.00HI93754F25 ISO** 0 to 150 mg/L $ 52.00HI93754G25 ISO** 0 to 1000 mg/L $ 52.00

Notes:* Method with chromium-sulfuric acid is officially recognized by EPA for wastewater analysis.** The HI 93754F25 and HI 93754G25 method follows the official method ISO 15705.*** This method is recommended for general purpose analysis with no chloride interference.


La

bo

ra

to

ry OxiTop BOD

Measurement Instrumentation Measurement using OxiTop Biological Oxygen Demand (BOD) Instrumentation is based on pressure measurement in a closed system: microorganisms in the sample consume the oxygen and form CO2. This is absorbed by NaOH, creating a vacuum, which can be read directly as a measured value in mg/l BOD.

The sample volume being tested regulates the amount of oxygen available for a complete BOD measurement. BOD measurement ranges of up to 4,000 mg/l can be measured using different sample volumes.

The OxiTop BOD instrumentation heads (green and yellow for differentiation of inflow/outflow) have an AutoTemp function: if the sample temperature is too cold, the start of BOD measurement is automatically delayed (by at least 1 hour) until a constant temperature has been reached.

Apart from the automatic storage of 5 measured values (1 value per day), further measured BOD values can be read at all times during or after the pe-riod of 5 days, which permits the tracking of check values or measurements over longer periods. The OxiTop BOD Instrumentation measurement system also offers simple operation, improved controllability, and non-toxicity.

Features• Simple operation• Non-Toxic• Stores 100 user-defined routine measurements• User-friendly on screen guidance for easy operation

SpecificationsMeasuring principle Respirometric (manometric)Display 2-digit 7-segment LED, 10 mmMeasured Parameter DigitsMeasuring Range 0 to 40 digits (+10 digits for overranging)Accuracy ±0.03 psi (+ 2 hPa) or + 1 digitAdmissible Measuring 68°F ± 1.8°F (20°C ± 1°C)Temperature Admissible Sample Temperature 59-68°F (15-20°C)(when being filled)Ambient temperatureStorage -13°F to +149°F (-25°C to +65°C)Operation 68°F ± 1.8 F (20°C ± 1 C)Dimensions H: 2.7in, dia. 2.8in (69 mm, dia. 70 mm)Weight Approx. 3 oz. (85 g)

Cat. No. Description PriceWTW208210- OxiTop IS 6, Universal Power Supply $ 2490.00WTW208211- OxiTop IS 12, Universal Power Supply $ 4190.00

Thermoreactor Model TR125

The TR125 thermoreactor is for chemical digestion of samples that require it, such as in the determination of COD, TOC, total phosphate and total nitrogen. The TR125 COD reactor is fitted with 25 holes for 16 mm diameter vials.

SpecificationsHousing Round metal block in epoxy covered housing, 25 holes 16 mm diameterFront keypad Robust membrane key pad with 4 keysTemperature settings 70/100/120/150 °C ±3°CTimer 30, 60, 120 minutes end continuous operation, automatic switch-off with alarmHeating 400 Watts electronically controlled, with overheating protection

Cat. No. Description PriceORTR125-00 Thermoreactor, Model TR125 $ 1200.00

DO/BOD/OUR/SOUR/ Temperature Bench Meter

Specifications

Dissolved OxygenRange 0.00 to 90.00 ppm; 0.0 to 600.0 % saturationResolution 0.01 ppm; 0.1% saturationAccuracy ±1.5% of reading ±1 digit

Barometric PressureRange 450 to 850 mmHg; 560 to 1133 mBarResolution 0 to 45 ppt (g/L)Accuracy ± 3 mmHg within ±15°C from the calibration point

Measurement Modes Direct D.O.; BOD (Biochemical Oxygen Demand);OUR (Oxygen Uptake Rate); SOUR (Specific Oxygen Uptake Rate).

SalinityRange 0 to 45 ppt (g/L)

TemperatureRange -20.0 to 120°C; -4.0 to 248.0°F; 253.15 to 393.15KResolution 0.1°C; 0.1°F; 0.1KAccuracy ±0.2°C/K; ±0.4°FD.O. 0.0 to 50.0°C; 32.0 to 122.0°F; 237.1 to 323.1 K

Calibration D.O. Automatic/user standard, 1 or 2 points

Cat. No. Description PriceHI442101-0 DO/BOD/OUR/SOUR/ Temperature Bench Meter $ 2590.00

611 800.463.4363

La

bo

ra

to

ry

Orion 5-Star PluspH/ORP/ISE/Cond/DO Benchtop Meter

Product Specifications



ISE Range 0 to 19999Resolution 1, 2, or 3 significant digitsRelative Accuracy ± 0.2 mV or 0.05%, whichever is greaterUnits M, mg/L, %, ppb, or no unitsCalibration Features Linear point to point, non-linear selectable auto-blank, low concentration range stability

mV Range ± 1999.9Resolution 0.1Relative Accuracy ± 0.2 or 0.05%, whichever is greater

Conductivity Range 0.000 to 3000 mS/cm, auto resolution with cell constant dependenceResolution 4 significant digits down to 0.001 μS/cm, cell constant dependent

Cat. No. Description PriceTO1119001- pH/ORP/ISE/Cond/DO Bench Meter Kit $ 3195.00

LaMotte SMART SPECTRO Spectrophotometer The Smart Spectro offers superior perfor-mance, is easy to use and is the best spectropho-tometer for the money. This instrument measures over 50 parameters.

Cat. No. Description PriceLAM2000-00 SMART Spectro Spectrophotometer $ 2090.00

EasyPure RoDi Water Distiller• Type 1 water from tap feed• Produces 800 ml/min of Type 1 water on demand• Fully contained with automatic operation• Compact design gives you an ultrapure water source within easy reach• Microprocessor controlled purity monitor provides a digital reading of the water purity exiting the system• 6.5 litre internal reservoir incorporates an air filter to prevent airborne impurities from contaminating the water during storage

Pre-Filtration Accessory Kit• Recommended for use when feed water has moderate to high turbidity (particles) and fouling index• Extends the life of the pre-filter incorporated in the EASYpure RoDi• Combination high surface area 5 micron pre filter and membrane descaling media

Wall Bracket• Recommended for use when bench space is limited• Sturdy swivel base provides easy access to rear cartridge door

Cat. No. Description PriceBAD13321-0 Deionization System Model EASYpure RoDi $ 4630.00


La

bo

ra

to

ry Zeta-Meter System

Model 4.0+

The measurement is very direct. The sample is placed in a viewing chamber called an electrophoresis cell. Then electric field is activated. This causes the colloids to move with a velocity that is proportional to their zeta potential, and a direction that indicates whether their charge is positive or negative. Once your sample is in our cell, you get your first results in a matter of seconds, and complete results in minutes.

Both of the above are complete with the following• Type GT-2 Glass-Teflon Electrophoresis cell (G201)• Molybdenum Anode with electrode lead (G202)• Platinum Cathode with electrode lead (G203)• Operating Manuals (2) (M601)• Min-U-Sil Test Colloid (R601)• Parallel Printer Cable and serial port cable• Serial link software, plus templates for Excel and for Lotus 123

Zeta Potential -125 to +125 millivoltsElectrophoretic Mobility +20 to –20 microns/sec. per volt/cmSpecific Conductance 0 to 60,000 microSiemens/cmTemperature 5°C to 75°CConcentration 10 mg/l to 80% solids by weightParticule Diameter • 1,5 to 100 microns (microscope) • 0,5 to 50 microns (video display)Sample Size 20 ml (standard cell)Suspending Medium 5 ml (low volume cell) water or organic liquids

Cat. No. Description PriceZEZM4UG-00 Zeta-Meter System 4.0+ with Unitron $ 15 885.00 Microscope and Type GT-2 CellZEZM4DG-00 Zeta-Meter System 4.0+ with Direct $ 21 050.00 Video Imaging and Type GT-2 Cell

Imhoff-Type Sedimentation Cone SAN

Heavy-duty welded construction of rigid, high-density polyethylene to support four Imhoff cones. Cones can be read easily with minimum interference due to design of rack. Dimensions are approximately 15-1/2” L x 8” W x 15” H, (39.37 cm x 20.32 cm x 38.10 cm).

Cat. No. Description PriceNAB01465WA Sediment Cone Rack $ 290.00NAB01464WA Sediment Cone $ 80.00

AquaMate Spectrophotometer for Water Analysis • Contains over 400 preprogrammed test methods answering recognized environmental standards• Can also use the HACH, Merck, CHEMitrics, and other analysis kits• Single beam 2nm bandwidth• Accuracy: ±1nm• Repeatability: ±0.2nm• Output: RS-232• Integrated printer (optional)• Wavelength range: 190-1100nm or 315-1100nm

Cat. No. Description PriceTH9423AQA2500E Visible model, 325 to 1,100nm $ 7295.00TH9423AQA2000E UV Visible model, 190 to 1,100nm $ 8659.00

Six-Paddle Programmable JarTester PB-900™ Series

Standard Features PB-700 PB-750 PB-900 PB-950Powder-coated steel x x x x uniframe chassisFluorescent-lamp floc illuminator x x x xStainless steel 1” x 3” paddles x x x xRound, 1L glass beakers or 6 4 6 42L B-KER2® Square lab jarsCE Certification (220V only) x xElectronic motor control, x x5-300 rpm; digital readout Four operator-programmable x xmemory banks Choice of 120V, 60 Hz or x x x x220V, 50/60 Hz

Optional Features Carrying case, meets Air Transport x xAssn. Specification 300, Category 1.

Cat. No. Description PricePB7790901- Programmable JarTester, 120 V, 60 Hz $ 3990.00PB7790902- Programmable JarTester, 220 V, 50/60 Hz $ 4270.00

631 800.463.4363

La

bo

ra

to

ry

Moisture Analyzers from OhausMB Series

Standard Features Include: • Flexible Performance –The OHAUS MB Series provide accurate results from 0.01% to 0.1% readability. And with your choice of halogen or infrared heating, they are ideal for textiles, wastewater and other applications.

• Simple to Operate –Set up and operation is extremely easy. Just press and hold the temperature or time buttons to set drying parameters, add your sample and begin the test process. This makes the MB Series ideal for routine tasks performed by operators of all skill levels.

• Compact, Easy-to-Clean Design –The compact footprint of the OHAUS MB Series is designed to take up less space on any counter top. Their easy-to-clean heating chambers are ideal for frequent use and inexpensive maintenance.

• Advanced Applications - For more complex measurement, the MB45 also features statistical analysis, 50 procedure test library, GLP/GMP printing and a dot matrix backlit display.

SpecificationsModel MB45 MB35 MB25 MB23Capacity 45g 35g 110g 110gRepeatability (Std Dev) (g) 0.05% (3g sample) 0.18% (3g sample) 0.2% (3g sample) 0.3% (3g sample) 0.015% (10g sample) 0.02% (10g sample) 0.05% (10g sample) 0.2% (10g sample)Readability 0.01% / 0.001g 0.02% / 0.002g 0.05% / 0.005g 0.1% / 0.01gSample Size 3g to 20g typical, 0.5g min.Output Bidirectional RS-232 Bidirectional RS-232 Bidirectional RS-232 Bidirectional RS-232 Temperature Range 50°C to 200°C in 1° increments 50°C to 160°C in 5° increments 50°C to 160°C in 5° increments 50°C to 160°C in 5° increments Cat. No. Description Price Cat. No. Description PriceOHMB23-000 Basic Moisture Analyzer Model MB23 $ 2300.00 OHMB35-000 Moisture Analyzer Model MB35 $ 3250.00OHMB25-000 Basic Moisture Analyzer Model MB25 $ 2700.00 OHMB45-000 Moisture Analyzer Model MB45 $ 3620.00

Portable Electronic Balances Model Scout Pro

FeaturesMultiple Weighing Units – g, kg, oz, oz+, lbs and combined lb:oz display, dwtEasy to Use – The high-contrast LCD display combined with two key operation makes the Scout Pro a snap to operateUSB or RS232 Connectivity – Quickly-installed option with integral cable allows data connection to PC or printer

SpecificationsModel SP202 SP402 SP401 SP602 SP601 SP2001 SP4001 SP6000 Capacity (g) 200 400 400 600 600 2000 4000 6000Readability (g) 0.01 0.01 0.1 0.01 0.1 0.1 0.1 1 Repeatability 0.01 0.01 0.1 0.01 0.1 0.1 0.1 1(Std. dev.) (g)Linearity (g) (±) ± 0.01 ± 0.01 ± 0.1 ± 0.01 ± 0.1 ± 0.2 ± 0.2 ± 1 Temperature range 50° to 104° F / 10°to 40° C

Cat. No. Description Price OHSP402-00 Scout Pro Balance, 400g x 0.01g $ 340.00 OHSP601-00 Scout Pro Balance, 600g x 0.1g $ 260.00


La

bo

ra

to

ry Analytical and Precision Balances from Ohaus

Pioneer Series

FeaturesEasy to Clean Analytical Draftshield Pioneer’s draftshield is designed with all glass panels, including three sliding doors. All panels are easy to remove and replace, and together with a stainless steel bot-tom, make it fast and easy to clean

Flexibility of Available OptionsEnsure accuracy with the internal calibration option.Optional Approved models are available for compliance with legal req

SpecificationsModels with Internal PA64C PA114C PA214C PA213C PA413C PA512C PA2102C PA4102C PA4101CCalibrationModels without PA64 PA114 PA214 PA213 PA413 PA512 PA2102 PA4102 PA4101Internal CalibrationCapacity (g) 65 110 210 210 410 510 2100 4100 4100Repeatability 0.1 1 10 100(Std Dev) mgReadability d (g) 0.0001 0.001 0.01 0.1Linearity (mg) 0.2 0.3 2 20 30 100Operating Conditions -10°C to 40°C at 10% to 80% relative humidity, non-condensing, up to 4000m above sea level

Cat. No. Description PriceOHPA512-00 Pioneer Analytical Balance Model PA512, 510g x 0.01g $ 870.00OHPA4101-0 Pioneer Analytical Balance Model PA4101, 4100 x 0.1g $ 760.00

Precision Metric Weights Single Weights - ASTM Class 1 Stainless Steel

Weights adjusted to ANSI/ASTM Class 1 can be used as a reference standard in calibrating other weights and can also be used to calibrate high precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.

Cat. No. Description Adustment Tolerance PriceOH4901511- 100 g - Single Weight ASTM Class 1 $ 105.00OH4901511C 100 g - Single Weight ASTM Class 1 - Certified $ 160.00OH4901611- 1 Kg - Single Weight ASTM Class 1 $ 170.00OH4901611C 1 Kg - Single Weight ASTM Class 1 - Certified $ 295.00OH4902411- 20 g - Single Weight ASTM Class 1 $ 80.00OH4902411C 20 g - Single Weight ASTM Class 1 - Certified $ 140.00OH4902511- 200 g - Single Weight ASTM Class 1 $ 115.00OH4902511C 200 g - Single Weight ASTM Class 1 - Certified $ 230.00OH4902611- 2 kg - Single Weight ASTM Class 1 $ 225.00OH4902611C 2 kg - Single Weight ASTM Class 1 - Certified $ 380.00

Other weights also are available

Authorized Distributor and Service Center

for:

Balances

651 800.463.4363

La

bo

ra

to

ry

CryoMill Cryogenic Grinding

The CryoMill has been spe-cially designed for cryogenic grinding. The grinding jar is continually cooled with liquid nitrogen from the integrated cooling system before and dur-ing the grinding process.Thus the sample is embrittled and volatile components are preserved.

The liquid nitrogen circulates through the system and is continually replenished from an autofill system in the exact amount which is required to keep the temperature at -196 °C.

The automatic cooling system guarantees that the grinding process is not started before the sample is thoroughly cooled. This results in reduced consumption and guarantees reproducible grinding results.

Advantages • Fast, efficient cryogenic grinding at -196 °C• No bothersome manual cooling thanks to integrated cooling system with Autofill • High final fineness due to grinding by impact and friction• Highly reproducible grinding results • Programmable cooling and grinding cycles • Digital parameter setting • Simple operation, easy cleaning • Feed size: up to 8 mm• Final fineness: down to approx. 5 μm• With 1 grinding station for jars up to 50 ml

SpecificationsApplications Size reduction, mixing, homogenization, cell disruptionFeed material Hard medium-hard, soft, brittle, elastic, fibrousSize reduction principle Impact, frictionMaterial feed size* ≤ 8 mmFinal fineness* ~ 5 μmBatch size / feed quantity* max. 20 mlNo. of grinding stations 1Setting of vibrational Digital, 3 - 25 Hz (180 - 1500 min-1)frequency Typical mean grinding time 10 min / 1 min (cooling / grinding)Dry grinding Yes Wet grinding Yes Cryogenic grinding Yes Type of grinding jars Screw top designMaterial of grinding tools Stainless steelGrinding jar sizes 5 ml / 25 ml / 35 ml / 50 ml

Cat. No. Description PriceRE207480001 CryoMill, 100-240 V, 50/60 Hz $ 12 900.00

Sieve Shaker Model AS 200 TAP

Features • Dry sieving in accordance with relevant standards • Horizontal, circular movement with taps • Measurement range 20 μm – 25 mm • Robust, maintenance-free • Adjustable plate for sieve stack • Digital timer • Easy handling, high operator safety (CE) • Free software EasySieve® for data management and evaluation • Modern sound-proof enclosure with small footprint (optional)

SpecificationsPerformance data AS 200 tapApplications Separation, fractioning, particle size determinationFeed material Powders, bulk materialsMeasuring range 20 μm to 25 mmMax. batch / feed capacity 3 kgMax. number of fractions 7 / 13Max. mass of sieve stack 6 kgTime display Digital, 1 - 99 min / continuous Sieving motion Horizontal, circular movement with taps Oscillations / taps 280 min-1 / 150 min-1

Cat. No. Description PriceREAS200TAP Sieve Shaker AS 200 TAP, 120 V, 60 Hz $ 3295.00

Sieves 8” Dia. Brass Cloth, Brass Frame All round test sieves meet ASTM E 11 and AASHTO M92

How to order sievesSieves may be ordered either by individual model numbers from ac-companying tables, or by descrip-tion only. Ordering by description is convenient when several sieves on an order are of same configuration, differing only by U.S. Standard size designation. Example: 8” diameter, full-height, all brass sieves in sizes 3/4”, #4, #8, #30, #100, regular pan.

Also available• 3”, 12” diameter frame • BB (All brass) • SS (all stainless)

Cat. No. ASTM No. Openning PriceATM08FN004 4 4.75 mm $ 64.00ATM08FN008 8 2.36 mm $ 63.00ATM08FN016 16 1.18 mm $ 63.00ATM08FN030 30 600 μm $ 63.00ATM08FN050 50 300 μm $ 63.00ATM08FN100 100 150 μm $ 68.00ATM08FN200 200 75 μm $ 94.00ATB08COVER 8” diam. --- $ 17.00ATB08FPAN 8” diam. --- $ 27.00


La

bo

ra

to

ry Mixer Mills

Model MM 200 and MM 400

High-Performance Mixer Mills for many Types of Material The RETSCH Mixer Mills MM 200 and MM 400 are used for size reduction and pulveriza-tion of hard, mediumhard and brittle samples as well as for soft, elastic or fibrous ones such as tissue, bones, hair, chemicals, drugs, coated and uncoated tablets, miner-als, ores, alloys, glass, ceramics, soils, sludge, plant parts, cereal grains, oil seeds, plastics, waste samples, wool and textiles, to name but a few. With their ability to process small sample amounts to analytical fineness quickly and reproducibly, RETSCH mixer mills are the ideal devices to prepare pressed tablets for subsequent XRF analysis.

Mixer Mills are Primarily used in the following Sectors:• Agriculture • Biology and Biotechnology • Ceramics and Glass • Chemicals and Plastics • Environmental Research • Foodstuffs • Forensic Science • Medicine and Pharmaceuticals • Metallurgy and Metallurgical Engineering • Mineralogy • New Materials Research

Performance data MM 200 MM 400Field of application Size reduction, mixing, homogenization, cell disruptionFeed Material hard, medium-hard, soft, brittle, elastic, fibrousFeed Size* up to 6 mm up to 8 mmFinal fineness* approx. 10 μm approx. 5 μmBatch/Sample Volume max. 2 x 10 ml max. 2 x 20 mlTypical Mean Grinding Time 2 minutes 2 minutesPossible Applications Dry grinding yes yes Wet grinding no yes Cryogenic grinding no yes Cell digestion with reaction vials max. 10 x 2.0 ml max. 20 x 2.0 mlSuitable grinding jars Grinding jar with push-fit lids 1.5 - 25 ml no Grinding jars with screw-top lids no 1.5 - 50 mlSelf-centering clamping device no yesNo. of grinding stations 2 2Digital preselection of vibrational frequency 3 - 25 Hz (180 - 1500 min-1) 3 - 30 Hz (180 - 1800 min-1)Digital preselection of grinding time 10 s - 99 min 10 s - 99 minMemory for parameter combinations 9 9

Grinding jars with lids Size 1.5 ml 5 ml 10 ml 25 mlHardened steel – – – 02.462.0052Stainless steel 02.462.0057 02.462.0059 02.462.0061 02.462.0119Tungsten carbide – 01.462.0115 01.462.0009 –Agate – 01.462.0113 01.462.0008 –Zirconium oxide – – 01.462.0194 01.462.0195Teflon – – 02.462.0184 02.462.0051Mixing beakers of polystyrene, 28 ml, 100 pcs. 22.041.0003

Grinding balls for MM 200 and MM 400 Item No.Grinding balls 5 mm Ø 7 mm Ø 9 mm Ø 10 mm Ø 12 mm Ø 15 mm Ø 20 mm Ø 25 mm ØHardened steel 05.368.0029 05.368.0030 05.368.0031 05.368.0059 05.368.0032 05.368.0108 – –Stainless steel 05.368.0034 05.368.0035 05.368.0036 05.368.0063 05.368.0037 05.368.0109 05.368.0062 05.368.0105Tungsten carbide 05.368.0038 05.368.0039 05.368.0040 05.368.0071 05.368.0041 05.368.0110 – –Agate 05.368.0024 05.368.0025 05.368.0026 05.368.0067 05.368.0027 – – –Zirconium oxide – – – – 05.368.0096 05.368.0113 05.368.0093 –Teflon with steel core – – – 05.368.0045 05.368.0046 05.368.0114 05.368.0047 –Polyamide* 05.368.0042 05.368.0043 05.368.0044 – 05.368.0003 – – –*for mixing beakers of polystyrene

Cat. No. Description PriceRE207460001 Mixer Mill MM 200, 100-240 V, 50/60 Hz $ 7695.00RE207450001 Mixer Mill MM 400, 100-240 V, 50/60 Hz $ 9495.00


671 800.463.4363

La

bo

ra

to

ry

ku-pF ApparatusModel 143000

Measuring principle• Flow process through soil water evaporation on a free surface of initially saturated soil samples• Flow rate recording through periodic weighing of samples• Recording of the gradient of water movement with two tensiometers along the flow line• Test run with ten soil samples simultaneously through computer- controlled sample cycling for weighing and tension measurement• PC program for analysis of measured data

Technical parametersNumber of samples max. 10 Measuring range < 10 cm/d ku-valueSampling ring volume 250 cm3 Weight of ca. 40 kg apparatusCross-sectional area 41 cm2 Size ca. 100x70x40 cmof sampling cylindersTime interval of min. 15 min Power 220V/ 1Aindividual measurement consumptionWeighing resolution 0,01 g PC connections COM 1Tension range 0...700 cm WS Test duration 2 - 10 days (pF 2,8) (depending on soil type)

Cat. No. Description PriceUGT143000- ku-pF Apparatus Model 143000 $ 46 850.00

Stereo microscopes XTX-5 Series

Features• Sharp stereo erect image over a wide field of view• 45° inclined and 360° rotatable binocular head with locked-in eyepiece. The left ocular-tube with diopter adjustment ±5dp. The interpupillary distance is between 55-75mm.• 1 (2x) and 1 (4x) objectives included• Supplied with pillar style stand• Product has CE approval• Power supply110V/60Hz• Illumination: 1. incandescent lamp 12V 10W 2. Halogen lamp 12V 10W 3. High brightness LED lamp

SpecificationsModel Eyepiece Objective Plate IlluminationXTX-5C WF10X 1X-3X Frosted glass Incident Illumination & transmitted illumination

Cat. No. Description PriceGMXTX5C-00 Digital Stereo Microscope Model XTX-5C $ 190.00

Gerhardt Trace Metal Digestion Unit Principle Block system for the digestion with aqua regia to determine the acid-soluble parts of metals in sludge, sediments and soils. As these highly poi-sonous trace metals can also get into the human food via plants and animals, the analysis of trace metal is of significant importance.

SMA 8 A SMA 20 AOrder N˚ 700815 702015Nominal Voltage 115 V AC 115 V ACFrequency 60 Hz 60 HzNominal Wattage 1160 W 2360 WWeight 32 kg 46 kgDimensions (WxDxH) 470 x 390 x 1000 mm 470 x 520 x 1000 mmTemperature 430°C 430°CHeating places 8 20Size of tubes 250 ml 250 mlDescription Trace metal digestion unit, Trace metal digestion unit, complete with 8 CSB-SMA complete with 20 CSB-SMA tubes 6816, 250 ml, KS 40 tubes 6816, 250 ml, KS 40

Cat. No. Description PriceGE700815-0 SMA 8 A, complete system, Contact us for prices 8 place with controller TZGE702015-0 SMA 20 A, complete system, Contact us for prices 20 place with controller TZ



La

bo

ra

to

ry Flame Photometer

Model 410

The reference in the field!• Efficiently measures Sodium (Na), Potassium (K), Lithium (Li), and with interchangeable filters, Calcium (Ca) and Barium (Ba)• Flame fed by propane, butane or natural gas• Compressor and diluter available

NA K LIRange 0-40 ppm 0-20 ppm 0-100 ppmSensitivity 0.5 ppm 0.5 ppm 5.0 ppmSpecificity Interference lower than 0.5% for the NA, K and Li of the concentration

Cat. No. Description PriceSH47541200 Flame Photometer Model 410 Classic $ 6150.00SH47541201 Flame Photometer Model 410 Industrial $ 7000.00SH47541301 Flame Photometer Model 410 Clinical $ 7000.00

Cimarec Digital Stirring Hot Plates

Features• Flashing digital warning system - for ultimate safety on hot plate models • Easy to read digital temperature settings, adjustable and repeatable • Stable, low-profile design • Seamless reflective white ceramic top, alkali/acid resistant • High-wattage heating element for faster boiling• Microprocessor feedback speed control (stirring model)• Strong magnetic coupling (stirring model)• Integral ring-stand holder• Detachable cord SpecificationsModel Electrical (50/60Hz) Stir Range Temp. RangeBAS130815- 120V, 3.4A, 20W 50-1200rpm N/A BASP131015- 120V, 3.4A, 410W 50-1200rpm 5-540°C / 41-1004°F

Cat. No. Description PriceBAS130815- Stirrer, 120V, 50/60Hz $ 355.00BASP131015- Stirring Hot Plate, 120V, 50/60Hz $ 480.00

Air Forced Ovens

Features• Temperature range 225°C ±2° • Incoly sheathed elements• Pilot light heat indicator. • Mercury thermometer.• Two adjustable shelves. • Double wall construction.• Scratch-proof rubber feet. • Full-length piano-type hinge.• Fiberglass insulation.

Model 10AF 20AF 30AF 40AFInt.(WxHxD in.) 12 x 8.82 x 10 13 x 11.6 x 13 18 x 14.6 x 12 18 x 19.5 x 14Ext.(WxHxD in.) 14 x 20.5 x 12 15 x 24.5 x 15 20 x 28.5 x 14 20 x 33.5 x 16Watt 800 1000 1200 1600Controller type Bi-metal Hydrolic Hydrolic HydrolicShipping weight 50 lbs 60 lbs 85 lbs 99 lbs

Cat. No. Description PriceQU30AF-000 Air Forced Oven Model 30AF $ 945.00

Refrigerated Incubator Model LI5 The Low Temperature Incubators are ideal for testing Biochemical oxygen demand (B.O.D.) of sewage and waste water, as well as other low and room temperature applications.

Specifications• Microprocessor Control System • P.I.D. Temperature Control• LED Display of Set point and Chamber Temperature• High and Low Limit Thermostats • Interior Electrical Outlet• Fan Assisted / Forced Air Circulation • Hermetically Sealed Compressor

DetailsCapacity 3.2 cu. Ft.Interior Dimensions 15 x 11 x 25 (38.1 x 36 x 64)WxDxH in. (cm) Exterior Dimensions 20.75 x 21.25 x 38.75 (52.7 x 54 x 98.4)WxDxH in. (cm) Temperature Range -10°C to 45° C ( at 21° C ambient)Temperature Uniformity +/- 0.5° at 20°CElectrical Specifications Volts: 120V Hertz: 50/60Hz Watts: 400W Capacity of Standard 62B.O.D. Bottles Shelving 2 Supplied

Cat. No. Description PriceSHLI5-0000 Refrigerated Incubator Model LI5 $ 3265.00

691 800.463.4363

La

bo

ra

to

ry

Delta Q Sterilizer

Specifications Delta Q 8 Delta Q 10 Magna-ClaveChamber Size 8 1/4” x 14” (21 cm x 36 cm) 9 7/8” x 17 1/2” (25.1 cm x 44.5 cm) 15 1/4” x 26” (38.7 cm x 66 cm)Chamber Capacity 739 cu. in. (12,110 cu. cm) 1340 cu. in. (22,019 cu. cm) Holds up to 14 Hu-Friedy cassettes or Holds 2 European trays Holds 3 large or 9 small Hu-Friedy equivalent cassettes or 3 European traysStart-Up Time (to 134°C) 10 to 13 minutes warm 12 minutes warm 13 minutes warmSterilization Time 16 minutes warm (unwrapped) 16 minutes warm (unwrapped) 18 minutes warmDrying Cycle Time 30 minutes preprogrammed, 30 minutes preprogrammed, N/A variable 0 to 99 minutes variable 0 – 99 minutesOutside Dimensions 17 1/2” wide x 19 3/4” deep x 12 1/4” high 19 1/4” wide x 23 5/8” deep x 14” high 28” wide x 34 1/2” deep x 53” high(w/stand) (44 cm wide x 50 cm deep x 31 cm high) (49 cm wide x 60 cm deep x 36 cm high) (71.1 cm wide x 88 cm deep x 134.6 cm high)Electrical 110-120 VAC, 50/60 Hz (ETL/cETL) 1 10-120 VAC, 50/60 Hz (ETL/cETL) 208 or 220/240 VAC, 60 Hz, (ETL/cETL) 220-240 VAC, 50/60 Hz (ETL/cETL) 220-240 VAC, 50/60 Hz (ETL/cETL) 220/240 VAC, 50 Hz (ETL/cETL)Amp circuit Unit requires dedicated 20 amp circuit Unit requires dedicated 20 amp circuit Unit requires dedicated 30 amp circuit

Cat. No. Description PriceDEDEQ8-000 Sterilizer Model Delta Q 8 $ 8190.00DEDEQ10-00 Sterilizer Model Delta Q 10 $ 9325.00

Laboratory High Vacuum PumpAdvantages• Two Stage : Produces 1 microns ultimate pressure.• Rotary Sliding Vane : Provides 85 liters per minute (3cfm) capacity and operates quietly.• Direct Drive : Reduces space needed.• Gas Ballast : Helps purge moisture from the vacuum system.• 0-30” Hg Gauge: Check vacuum at the intake.

SpecificationsFree Air Displacement 85 Liters per Minute (3 Cubic Feet per Minute)Ultimate Vacuum 1- microns laboratory conditions/better than 25 microns field conditionsPump Speed 1725 RPMMotor 1/2 HP 110 Volt, 60 HertzOil Capacity 27 oz (785 CC)Operating Temperature 30°F to 170°F

Cat. No. Description PriceHU1763-000 High Vacuum Pump, 115 V/60Hz $ 695.00

Digital Manometer Model H-1754D A precise measurement device designed to replace mercury-filled manometers. This portable, hand-held device can be easily moved around the laboratory. Holes are provided for bench or wall mounting and a 3/8” barb fitting is used for quick connections. The instrument features a digital display range of 0 to 1000mm Hg (absolute) at a resolution of 0.1mm Hg. The device has a rated accuracy of +/-0.5% full scale and is powered by one 9V battery.

Cat. No. Description PriceHU1754D-00 Digital Manometer $ 620.00

Indicating Drierite Air Drying UnitModel H-1759 Easily installs in-line between vacuum pump and test equipment. This refillable unit measures 2-5/8” by 11-3/8” (667 x 289mm) with hose barbs at both ends, which can accept 1/4” to 3/8” flexible tubing. Supplied complete with 650g of indicating desiccant.

Cat. No. Description PriceHU1759-000 Indicating Drierite Air Drying Unit $ 99.00


Mi

sc

el

la

ne

ou

s SXBlue IIGPS Receiver

The SXBlue II GPS is a compact real-time BlueTooth Submeter receiver. With unique revolutionary technology, the SXBlue GPS is also the first GIS/Mapping grade receiver to achieve submeter 2dRMS (95%) in realtime without the need to post-process GPS data.

The receivers use SBAS signals (WAAS, EGNOS, MSAS, and compatible) to full potential and as the only needed source of differential correction, even for forestry applications.

This field-proven technology now opens the door to support true mobile GIS initiative. Find-ing assets, collecting new data and updating maps accurately and independently of any third party post-processing software has become possible today.

The flexibility of these receivers allows the user to build field data collection systems around specific needs and choices of computer platform with freedom to upgrade as mobile solutions evolve and grow.

Geneq also offers a complete line of rugged Pocket and Tablet PC’s in the SXBlue MAPPER SERIES.

Features• Sub-60cm, 2dRMS real-time performance• Multi-port interface (Bluetooth, USB, RS-232)• Rugged and Waterproof design• Integrated Li-Ion battery pack for 10+ hours autonomy• Battery fuel gauge• Compact and lightweight• RoHS compliant

EnvironmentalOperating Temperature -40°C to +85°C 5Storage Temperature -40°C to +85°CHumidity 95% non-condensingCompliance FCC, CE, RoHS and Lead-free

SpecificationsGPS Sensor Receiver Type L1, C/A code, with carrier phase smoothingChannels 12-channel, parallel tracking (10-channel when tracking SBAS)SBAS Support 2-channel, parallel tracking WAAS, EGNOS, MSAS and compatibleUpdate Rate 1Hz default, optional 2, 10 and 20HzDGPS Horizontal Accuracy < 60cm 2dRMS, 95% confidence 1 (< 30cm HRMS, < 25cm CEP)Horizontal Accuracy < 2.5m 2dRMS, 95% confidence (autonomous, no SA) 2Optional Proprietary RTCM < 20cm 2dRMS, 95% confidence 3Optional L1 RT < 5cm 2dRMS, 95% confidence 3Cold Start 60s (no almanac or RTC)Reacquisition < 1sMaximum Speed 1607 km/h (999mph)Maximum Altitude 18,288m (60,000 ft)

Cat. No. Description PriceGESXB2GPS- SXBlue II GPS with Battery Pack $ 2100.00

TDS Nomad Rugged Handheld Computer The Nomad makes it easy to collect, save and transmit data in the field because it’s available with so many built-in capabilities. Compute your location with the integrated GPS receiver option for navigation applications. Quickly track your assets with the integrated 1D laser bar code scanner option. Or capture color images with the 2 megapixel digital camera option for inspection, maintenance and repair applications. Plus, you can use the Nomad’s CompactFlash (CF) and Secure Digital (SDIO) slots4 to add even more devices.

ConfigurationsModel Flash GPS BT 802.11g Laser Camera Keypad scanner 800LE 1 GB x x x x x Numeric800LC 1 GB x x x x PDA or Numeric800L 1 GB x x x PDA or Numeric800B 512 MB x PDA or Numeric

Cat. No. Description PriceTDSNOM800LE TDS Nomad Model 800LE $ 3100.00TDSNOM800LC TDS Nomad Model 800LC $ 2600.00TDSNOM800L TDS Nomad Model 800L $ 2100.00TDSNOM800B TDS Nomad Model 800B $ 2100.00

711 800.463.4363

Mi

sc

el

la

ne

ou

s

Rugged Tablet PCiX104C3 Series

The iX104C integrates high-resolution, high-contrast display technol-ogy that enables end users to easily view GIS, video, schematics and other important geographical information. Equipped with Xplore’s award-winning AllVue technology, it allows users to experience superior visualization whether they are operating in direct sunlight or in office lighting environments.

SpecificationsMain Ram:(Standard) 1GB DDR2Hard Disk Drive: 120GB IDE HDD (User Accessible) (2.5” shock mounted)Temperature MIL-STD 810F methods 501.4 & 502.4 Operating: -4° to 140° F (-20° to 60° C)Humidity MIL-STD 810F method 507.4 0 to 95% non-condensing

Cat. No. Description PriceXTC4PVXL003 iX104C4 Rugged Tablet PC $ 5450.00 Intel Celeron M 423 (1.06 GHz) Processor

Multi-Frequency Digital Line TracerModel TW-8800

The state-of- the-art TW-8800 utilizes advanced digital signal processing for precision locating performance yet is extremely easy to use. Three active frequencies provided by the transmitter, and two passive modes for tracing without the transmitter, are provided. The lightweight multifre-quency receiver is simple to use.

Features • Advanced digital signal processing for accurate locating• Multi-frequency operation• Automatic gain control for maximum sensitivity• Passive locating modes (power & radio frequencies)• Audio and visual left/right guidance• Weather resistant design• Push button depth measurement• Large easy to read LCD display• Hard or soft carrying case standard equipment

Metal DetectorModel M-97

The Fisher M-97 is specially designed for finding buried or paved over valves, boxes, or manhole covers, or any other concealed metallic object. It also locates targets made of aluminum, brass and lead. The M-97 features push button tuning allowing the user to quickly and easily maintain optimum sensitivity for easy pinpointing of buried metallic objects. Plus, the M-97 offers auto-tune circuitry and a waterproof search coil. New to the M Series is the ease with which the M-97 can be stored. Just compact the lower stem, twist the search coil 90 degrees, and fold the search coil flat.

SpecificationsOutput Frequencies of search coil 4.5 kHzSensitivity 0.20 mv RMS for full scaleSensitivity Adjustment Range 12:1Output Indication / Meter 1 milliamp, 0-100 linear scaleSpeaker 16-ohm impedance

AccessoriesOptional HeaphonesHard carrying case Coil CoversVinyl carrying bag 11’’ search coil

Cat. No. Description PriceFIM97-0000 Metal detector Model M-97 $ 865.00

SpecificationsReceiverReadout Units Inches or cm (factory preset)Sensitivity Adjust AutomaticOperating Temp -4°F to + 140°F (-20°C to +60°C)TransmitterOutput Frequencies 82kHz, 8.2kHz, 820HzOutput Power (nominal) 82kHz: .7Watts, 8.2kHz: 7.0Watts, 820Hz: 7.0Watts

Cat. No. Description PriceFITW8800-0 Multi-Frequency Digital Line Tracer $ 3750.00 Model TW-8800


Mi

sc

el

la

ne

ou

s Laser Distance Meters Model Disto Series

Functions D2 D3 D5 D8Minimum / maximum measurements • • • •Continuous measurement • • • •Addition / subtraction • • • •Area / volume measurements • • • •Room dimensions • • •Indirect measurements using Pythagoras • • • •Horizontal distance past obstructions • • •Trapezium measurements • • Indirect measurements using tilt sensor •

Specifications D2 D3 D5 D8Typical measuring accuracy ± 0.06 in ± 0.06 in ± 0.06 in ± 0.04 inRange 0.16 ft – 197 ft 0.16 ft – 328 ft 0.16 ft – 650 ft 0.16 ft – 650 ftPower Range Technology™ • • •Distance in ft Ø of the laser dot in inches 33 ft, 164 ft, 328 ft 33 ft, 164 ft, 328 ft 0.24”, 1.18”, 2.36” 0.24”, 1.18”, 2.36”Tilt sensorMeasuring range ± 45˚ ± 45˚ 360˚Accuracy to the laser beam ± 0.3˚ ± 0.3˚ - 0.1°/+ 0.2˚Accuracy to the housing ± 0.3˚ ± 0.3˚ ± 0.1˚Units in the tilt sensor 0.0˚, 0.0% 0.0°, 0.00% 0.0°, 0.00% mm/m, in/ft mm/m, in/ft4-fold digital viewfinder • •Store constant values 1 1 1Recall last values 10 20 20 30Time delay release (timer) • • • •Display illumination • • • •Measuring units m, ft, in m, ft, in m, ft, in, yd m, ft, in, ydFree software •Data interface* BLUETOOTH®

(Class 2)Measurements per set of batteries up to 5,000 up to 5,000 up to 5,000 up to 5,000**Multifunctional end-piece manual automatic automatic automaticTripod thread Plastic Metal MetalBatteries Typ AAA Typ AAA Typ AAA Typ AAA 2x1,5V 2x1,5V 2x1,5V 2x1,5VSplash proof / dust protected IP54 • • • •Dimensions 4.37” x 1.65” x 0.91” 4.29” x 1.77” x 0.94” 5.64” x 2.17” x 1.18” 5.64” x 2.17” x 1.18”Weight with batteries 3.17 oz. 3.88 oz. 6.87 oz. 7.23 oz.

Cat. No. Description Price Cat. No. Description PriceLEDISTOD2- Laser Distance Meter Model Disto D2 $ 249.00 LEDISTOD5- Laser Distance Meter Model Disto D5 $ 649.00LEDISTOD3- Laser Distance Meter Model Disto D3 $ 409.00 LEDISTOD8- Laser Distance Meter Model Disto D8 $ 949.00

B i l l to : Ship to :

Order Form

Quant i ty Cat . No. Descr ipt ion Uni t Pr ice Tota l Pr ice

Sub-total :

Date :

Order Form # :

Bi l l to : Ship to :

Company:

Attention:

Adress:

City:

Postal Code:

Phone:

Fax:

E-mail:

Method of payment

Credit Card Invoice us Check enclosed

Visa / Mastercard Number: Expiration date:

8047, Jarry East, Montreal, Qc, H1J 1H6Phone: 514 354-2511 • 1 800-463-4363 Fax: 514 354-6948E-mail: [email protected] Web Site: www.geneq.com

Name:

Signature:

Title:

Sub-total:

Shipping:

G.S.T.:

(NB/NS/NL) H.S.T.:

P.S.T.:

Total :

Quant i ty Cat . No. Descr ipt ion Uni t Pr ice Tota l Pr ice

8047, Jarry East, Montreal, Qc, H1J 1H6Phone: 514 354-2511 • 1 800-463-4363 Fax: 514 354-6948E-mail: [email protected] Web Site: www.geneq.com

Thank you for your order

751 800.463.4363

Ge

ne

q

IndexAAir Flow Volume Meter 47Air Quality Meters – Indoor 40Air Quality Monitor 43, 47Air Sampler – Microbiological 40Air Sampler – MiniVol Portable 38Air Sampler – Particulate 37Air Sampler – Particulate (TSP) 37Air Sampling Equipment 37Air Temperature Sensors 30Air Velocity Meters 36Alpha Bottles 23Anemometers 31Anemometer – Thermal 45Auger Kits 55

BBailers – Disposable 16Balances – Electronic 63, 64Barometer 26Barometer – Altimeter 31Barometric Pressure Sensor 30Bioremediation Tool iSOC 53Bladder Pump 15BOD Measurement Instrumentation 60

CCalibration Gas Kit 41Capillary Suction Time 59Chlorine in Oil Test Kits 53, 54Chlorine Meter 10CO2 Analyzer 43COD Certified Reagents 59COD Test Tube Heater 59Coliform Indicator Testing Kit 59Colorimeter 11Colorimeter – Chlorine 11Combustion Analyzer 45Compost Monitor 58Compost Thermometer 58Computer – Rugged Handheld 70Conductivity Meter 5Current Velocity Meter 21

DData Acquisition Unit 32Data Collector 28Data Logger – Pressure 46Data Logger – Temperature 29Data Loggers 28, 29Digestion Unit 67Display Unit 4Dissolved Oxygen Instruments 8DO/BOD/OUR/SOUR/ Temperature Bench Meter 60D.O. Meter 5Drierite Air Drying Unit 69

EEkman Dredge 23Electro – Fisher 22ElectroSmog Meter 48EMF Tester 48

FFilters – Inline Disposable 0.45 μm 17Flocculator 62Flow Gauge - Hydrant 24Flow Measurment - Flow Probe 21Flow Meters – Magnetic 19Flow Meters – Mechanical 20Flow Meters – Open Channel 18Flow Meters – Paddlewheel 20Flow Meters – Ultrasonic 19Flumes – Palmer Bowlus 21Fluoride Tester 9Foot Valve Pump 16

GGas analyzer – Landfill 44Gas Detectors 41, 42Gas Transmitters 44GPS – SXBlue II 70

HHeat Stress Monitor 51Hot Plates – Stirring 68Humidity and Temperature Transmitters 50, 51Hydrocarbon Recovery – Filter Bucket 53Hydrocarbon Test Kits 53, 54Hydrocarbon Water Test Kit 54HydroScout Analyzer System for Used Oil 54

IImhoff-Type Sedimentation Cone 62Incubator 68Infiltrometer 58Infiltrometer Set 55Interface Meter 12

JJar Tester 62

Kku-pF Apparatus 67

LLaser Distance Meters 72Light Meters 47Lightning Detector 35Line Tracer – Digital 71

MManometers 46, 69Mass Monitor 38Metal Detector 71Microscopes 67Mills – Grinding 65Mixer Mills 66Moisture Analyzers 63Moisture Measurement System 52Multi-Parameter Probe 5Multiparameter Water Quality Meter 4, 5

OOvens 68Oxygen Transmitter 8Ozone Monitor 43

PParticle Counters 39Particulate Monitor 37PC’s – Rugged Tablet 71Peristaltic Pump 16Permeameter – Guelph 56pH Electrodes 7pH Meters 5, 6, 7, 61pH/ORP and Temperature Meters 6Photometer – Flame 68Photometer – Portable 11Piezometers – Standpipe 16Ponar Grab – Petite 23Pressure Transducers 18Process Meter 17Pump – Hydrolift II 16Pumps – Submersible 17Psychrometer - Precision 51Pyranometer 33

RRadiation Detector 48Radiation Monitor and Alarm 49Radiation Shield 31Radiometer – Thermopile Shadowband 35Rain Gauges 15, 30, 34Reagents 11Refrigeration – Analyzer 45Relative Humidity and Temperature – Probes 34Relative Humidity and Temperature – Sensors 33Root Monitoring 58

SSampler – Fuel – Water 22Secchi Disk 23Sieve Shaker 65Sieves 65Sludge Level Detector 21Sludge Samplers 22Software – Weather 25Soil Moisture – Meters & Monitors 55, 56, 58 Soil Moisture Station 56Soil Moisture Sensors 57Soil Moisture, Temperature and Salinity Meters 52Soil Nitrate Quick Test Kit 57Soil Sampling Kit 55Soil Testing Outfits 57Solar Power Meter 48Solar Radiation Sensor 33Sound Level Calibrator 50Sound Level Meters 49, 50Spectrum Analyzer 49Spectrophotometer 61, 62Staff Gauge 24Sterilizer 69Suspended Solids and Turbidity Meter 8

TTelemetry Systems 13Temperature – RoadWatch Systems for Roads 35Test Kit for soil – PetroFlag 54Testers – pH, Conductivity 3Thermal Imager 52Thermo-Anemometer Datalogger 46Thermoreactor 60TLC Meter 12Towers – Fold-Over 26Towers – Free Standing 26Traffic Data Acquisition system – Infrared 34Translator – Meteorological 27Transmitters – Water Level 18Tripod - Portable 26Tubing 16Turbidity Meters 8, 9, 10

VVacuum Pump 69Vacuum Sampler 17Visibility Sensor 35Volumetric Weirs 21VOC’s PID Detector 44

WWater Distiller 61Water Level Meters 12, 20Water Level Transmitters 13, 14, 18Water Quality Meters – Multiparameter 4, 5Water Quality Multiprobe 4Water Samplers 23Water Samplers – Alpha Bottles 23Water Samplers – Kemmerer Bottles 23Water Sampler – Niskin 24Water Sampler – Portable Vacuum 17Waterproof Testers 3Weather Balloons 30Weather Monitoring System 28Weather Stations 25Weather Transmitter 27Weights – Precision Metric 64Wind Direction Sensor 33Wind Monitor 26Wind Sensor – Ultrasonic 32Wind Speed Sensor 32WindTracker 27

ZZeta-Meter System 62

Cat-Geneq Environment 2009

Documents

Transcript of Cat-Geneq Environment 2009