CARPET METAL & SPECIALTY ACCESSORIES · seam binders cm1342 .....pg.08 cm1344 ..... pg.08 cm1142...

YOUR FLOORING ACCESSORIES SPECIALIST

Product Catalog 2016

CARPET METAL & SPECIALTY ACCESSORIES

01

The information in this catalog is gathered from customers, end users, and our personal experiences. The products have been created to provide you with solutions for today’s transition challenges.

We would like to thank you for your patronage and for giving us the opportunity to become “Your Flooring Accessories Specialist”. Being “Your Flooring Accessories Specialist” means ...

• We will provide the best service in the industry by utilizing a team of dedicated Customer Service Specialists.

• Our product will maintain a high degree of consistency and quality to meet the needs of our customers, by manufacturing our product to ISO standards.

• We will incorporate our customers input when making decisions, by using ideas and suggestions brought to us.

• All our business dealings will be handled with integrity, by ensuring customers and suppliers alike know the facts.

• New product innovation will be an integral part of our business strategy, by continually anticipating market trends and designing the accessories demanded by the industry.

For questions or concerns pertaining to products contained in this catalog, please contact our Customer Service department. Our team of specialists will be happy to assist you.

Toll free: 1 800 565 6653E-mail: [email protected]: www.loxcreenflooring.com

02

TABLE OF CONTENTS

TAP DOWNS

CM1740 ..................................Pg.04

CM1741 ...................................Pg.04

CM1750 ..................................Pg.04

CM1760 ..................................Pg.05

CM1770...................................Pg.05

CM1621 ...................................Pg.05

CM1650 ..................................Pg.06

CM1653 ..................................Pg.06

CM1657 ...................................Pg.06

BEVEL BARS

CM1196 ...................................Pg.07

CM1197 ...................................Pg.07

CM2196 ..................................Pg.07

CM2197 ...................................Pg.07

CM3196 ..................................Pg.08

SEAM BINDERS

CM1342 ..................................Pg.08

CM1344 ..................................Pg.08

CM1142 ...................................Pg.09

NOSING

CM2184 ..................................Pg.09

CM2190 ..................................Pg.09

CM2191 ...................................Pg.10

CM2193 ..................................Pg.10

CM2199 ..................................Pg.10

CM2194 ..................................Pg.11

CM2182 ..................................Pg.11

CM2195 ..................................Pg.11

CM2198 ..................................Pg.12

CM2185 ..................................Pg.12

CM2192 ..................................Pg.12

THRESHOLDS

CM1144 ...................................Pg.13

CM1145 ...................................Pg.13

CM1146 ...................................Pg.14

CM1148 ...................................Pg.14

WSB4424 ...............................Pg.14

WSB4425 ...............................Pg.14

WSB4426 ...............................Pg.14

WSB4424LP ...........................Pg.14

WSB4425LP ...........................Pg.14

WSB4426LP ...........................Pg.14

SPECIALTY TRIM

CM1121 ....................................Pg.15

CM1122 ...................................Pg.15

CM1125 ...................................Pg.15

CM1155 ...................................Pg.16

CM2130 ..................................Pg.16

CM330 ....................................Pg.16

CM331 .....................................Pg.17

CM3330 ..................................Pg.17

CM3340 ..................................Pg.17

CM3220 ..................................Pg.18

CM1666 ..................................Pg.18

CM1766 ..................................Pg.18

CM1680 ..................................Pg.19

CM3210 ..................................Pg.19

CM1162 ...................................Pg.19

CM1163 ...................................Pg.19

CM1164 ...................................Pg.19

CAP TRACK - PINLESS

CM1651 ...................................Pg.20

CM1655 ..................................Pg.20

CM1658 ..................................Pg.20

CM1659 ..................................Pg.20

CM1660 ..................................Pg.20

CAP TRACK - PINNED

CM1751 ...................................Pg.21

CM1752 ...................................Pg.21

CM1755 ...................................Pg.21

CM1759 ...................................Pg.21

LUXURY VINYL TILE TRIM

LV8303 ...................................Pg.22

LV8304 ...................................Pg.22

LV8305 ...................................Pg.22

LV8503 ...................................Pg.22

LV8504 ...................................Pg.22

LV8505 ...................................Pg.22

LV8703 ...................................Pg.22

LV8704 ...................................Pg.22

LV8705 ...................................Pg.22

ALUMINUM FINISHES

.................................................Pg.23

POLICY AND WARRANTY

.................................................Pg.24

03

The traditional Bengard carpet metal and specialty trim line was designed to provide

products that aid in unique and detail oriented installations. This tried and true

program has been honed and fine tuned over decades of countless installations

and experience. These can include applications such as counters, mirrors/glass,

fireplaces, and wheelchair accessible ramps. No matter what the situation is,

Bengard can provide the item to finish the job with flare.

CARPET METAL & SPECIALTY TRIM

04

TAPDOWNS

LENGTH: 12 FT | PACK SIZE: 42 PCSAVAILABLE IN FLEX (CONTOUR) : 12 PCS


CM1740

CM1741

W=1-3/8”, H=9/16”

W=1-3/8”, H=9/16”

• • • •

• • • •

Residential weight pinned Tapdown with additional top return to lock in carpet. For use with low to medium pile action backed carpet up to 30 oz. Ultra Pin system for maximum holding strength.

Economy weight pinned Tapdown with additional top return to lock in carpet. For use with low to medium pile action backed carpet up to 30 oz. Ultra Pin system for maximum holding strength.

Profile Number DimensionsFinishes

HAB HGA HSI HTI


HAB HGA HSI HTI


CM1750 W=1-1/2”, H=5/8”

Heavy duty pinned Tapdown for use with high pile action backed carpet up to 60oz. Ultra Pin system for maximum holding strength.

• • • • •


CVG HAB HGA HSI HTI

W

H

W

H

W

H

05

TAPDOWNS

LENGTH: 12 FT | PACK SIZE: 42 PCS


HAB HGA HSI HTI

CM1621 W=1-3/8”, H=3/4” • • • •

Multi-purpose Tapdown that can be used for carpet underpad installation or glue down installations. The large lip covers even the thickest carpets with room for tucking the edge. Tackless can be used on the bottom for carpet with underpad installations.


CVG HAB HGA HSI HTI

CM1770 W=1-1/2”, H=3/4” • • • • •

Economy large lip (3/4”) Tapdown for use with the thickest action backed carpet. May be used in areas of low traffic. Ultra Pin system as our other pinned metals for maximum holding strength.



CVG HGA HSI HTI

CM1760 W=1-5/8”, H=3/4” • • • •

Extra heavy duty pinned Tapdown for use with the thickest action backed carpets. Ultra Pin system for maximum holding strength. 3/4” top face.


W

H

W

H

W

H

06

TAPDOWNS

CM1650

CM1653

W=1-3/8”, H=5/8”

W=1-1/4”, H=1/2”

Heavy duty pinless Tapdown for use with rubber backed and direct glue down installations. Nail holes on 12” centres.

Residential weight Pinless Tapdown for use with foam backed carpet or direct glue down installations.

• • •


HGA HSI HTI

• • • • • •


CVG HAB HCA HGA HSI HTI

• • • •



HSI HTI

CM1657 W=1-7/8”, H=3/4” • •

Commercial duty Pinless Tapdown for use in high traffic commercial settings. Used in glue down carpet installations.



W

W

H

H

W

H

07

BEVEL BARS

LENGTH: 12 FT | PACK SIZE: 42 PCSMETAL DECOR*: 12 PCS


1-1/2” Residential Bevel Bar for transitions. Made for height differentials of up to 3/8”.

1-1/2” Economy Bevel Bar for transitions. Made for height differentials of up to 3/8”.


CVG DOK* GOK* HAB HDB HGA HSI HTI

CM2196 W=1-1/2”, H=3/8” • • • • • • • •


CM1197 W=1”, H=1/4”

1” Economy Bevel Bar for transitions. Made for height differentials of up to 5/16”.


CVG HAB HCA HDB HGA HSI HTI

• • • • • • •


CM1196 W=1”, H=1/4”

1” Residential Bevel Bar for transitions. Made for height differentials of up to 5/16”.


CVG HAB HDB HGA HSI HTI

• • • • • •

W

H

W

H


CVG HAB HDB HGA HSI HTI

CM2197 W=1-1/2”, H=3/8” • • • • • •

W

H

W

H

08

BEVEL BARS


2” Commercial weight Bevel Bar. For use in high trafficareas or where extreme height differentials exists.




HGA HSI HTI


CVG HGA HSI HTI

CM1342

CM1344

W=3/4”, H=1/10”

W=1”, H=1/10”

• • •

• • • •

3/4” Seam Binder Covers seams of hard surface or resilient floors.

1” Flat Joiner. For binding seams at doorways where dissimilar floors of equal height meet.

SEAM BINDERS


HDB HGA HSI HTI

CM3196 W=2”, H=3/8” • • • •

W

H

W

W

H

H

09



CVG DOK* GOK* HAB HDB HGA HSI HTI

CM1142 W=1-1/4”, H=1/10” • • • • • • • •

1 -1/4” for seams where greater bridging is required.

NOSING



CM2184

CM2190

H=1-1/8”, W=1-1/8”

H=1-3/8”, W=1-1/8”

1-1/8” Drop Stair Nosing. Protects edge of stair from damage. This product is designed for light commercial or residential use.



CVG DOK* GOK* HAB HGA HSI HTI


HDB HGA HSI HTI

• • • • • • •

• • • •

SEAM BINDERS

W

W

W

H

H

H

10

NOSING





HDB HGA HSI HTI


HCA HGA HSI HTI

CM2191

CM2193

CM2199

H=1-5/8”, W=1-1/8”

H=1-7/8”, W=1-3/16”

H=2”, W=1-1/4”

• • • •

• • • •



2” Drop Stair Nosing. Protects edge of stair from damage. This product is designed for light commercial or residential use.

• • • • • • •

• • • •


CVG HAB HBK HCA HDB HGA HSI HTI

• • • • • • • •

W

W

W

H

H

H

11



CM2182

CM2195

H=1-1/8”, W=1-1/8”

H=1-1/2”, W= 2-1/2”

1-1/8” Drop Stair Nosing. Protects edge of stair from damage. Designed for light commercial or residential use.

1-1/2” Drop X 2-1/2” Tread Stair Nosing. Provides excellent traction and protection at edge of stair. Ideal for repairing stairs where existing nosing has worn out. Designed for commercial use.

Available in Drilled Staggered (DS) or Drilled Center (DC).

NOSING


CVG HAB HGA HSI HTI

• • • • •


BCL HGA HSI HTI SGA

• • • • •


CM2194 H=2”, W= 1-1/2”

Full 2” Drop Stair Nosing with 1-1/2” top tread. Covers most imperfections. The wider top tread allows for nosing to be secured away from stair edge especially when edges of stairs are damaged. Designed for commercial and residential use.


HGA HSI HTI

• • •

W

W

H

H

W

H

12





BCL SGA


SCA STI


SGA MIL

CM2198

CM2185

CM2192

H=1-3/16”, W=3-1/16”

H1=1/8”, H2=1-5/8”

W=1-1/2”, H=1-3/8”

• •

• •

• •

1-3/16” Drop X 3-1/16” Tread Stair Nosing. Provides excellent traction and protection at edge of stair. Ideal for repairing stairs where existing nosing has worn out. Designed for commercial use.


Scribe to Nosing for 1/8” VCT or resilient floors of similar thicknesses. 1-5/8” inside drop to work in most settings. With adhesive reservoir for clean and easy installation.

1-3/8” Drop Commercial Square Nose for use on concrete pan or square stair. Can also be used as a heavy duty corner guard. Drilling available by special order.

NOSING

W

W

H

H2

H1

H

13



MIL

CM1145 W=2-1/2”, H=1/4” •

Smooth-top threshold for use in joining large gaps. Can also be used as an expansion joint cover. Suitable for high traffic areas.


THRESHOLDS



MIL

CM1144 W=2-1/2”, H=3/16” •

Ribbed threshold for use in joining large gaps.Can also be used as an expansion joint cover.Suitable where low profile or wheelchair access is required.

Available in Drilled Staggered (DS) or Drilled Center (DC).W

H

W

H

14


Profile Numbers DimensionsFinishes

MIL

CM1146

CM1148

W=2-1/2”, H=1/8”

W=4”, H=1/8”

•

•

Ribbed threshold for use in joining large gaps.Can also be used as an expansion joint cover.


THRESHOLDS


Low profile (LP)recommendedfor wheelchairaccessible areas


MIL

WSB4424

WSB4425

WSB4426

WSB4424LP

WSB4425LP

WSB4426LP

W=4”, H1=1/8”, H2=1/2”

W=5”, H1=1/8”, H2=1/2”

W=6”, H1=1/8”, H2=1/2”

W=4”, H1=1/8”, H2=1/4”

W=5”, H1=1/8”, H2=1/4”

W=6”, H1=1/8”, H2=1/4”

•

•

•

•

•

•

Barrier Free quality extruded Aluminum Thresholds designed for use in commercial applications. Support bars built for added strength.

Full 1/2” height for retrofit situations. 1/4” height low profile (LPB) recommended for wheel chair accessible areas.

Construction Materials Board (CMB) listed material.• Thresholds come drilled center line, staggered, or undrilled.• All thresholds shown meet requirements of ADA, CAN/CSA-B651, and ADMG-1992.


W

H

W

H

15

SPECIALTY TRIM




HGA HSI HTI SCA

CM1121

CM1122

W=3/4”, H=1/10”

W=1/10”, H=15/16”

• • • •

Tile Edge Cap for Finishing the edge of tile or resilient floor. Accommodates materials from 0.080” up to 1/8” thick.

Resilient Flooring Cap. Used when coving sheet goods up the wall tofinish off the exposed edge. For materials up to 2.5mm (1/10”).


HSI SCA MIL

• • •



SCA MIL

CM1125 W=1/8” , H=15/16” • •

Resilient Flooring Cap. Used when coving sheet goods up the wall tofinish off the exposed edge. For materials up to 3.2mm (1/8”) thick.

W

W

H

H

W

H

16

SPECIALTY TRIM



MIL SCA SGA STI

CM1155 W=7/8”, H=5/8” • • • •

• • • •

7/8” wide Hatch Cover molding. Used to cover gaps in the floorwhere hatch covers are installed.


CM2130 W=1/4”, H=3/4”

9/32” face cap trim for 1/4” material.


SBK SCA SGA

• • •

LENGTH: 12 FT | PACK SIZE: 12 PCS (SCA: 40 PCS)

CM330 W=1/10”, H=1-3/16”

Small face cap trim for 1/10” material.


BCL MIL SCA STI

W

H

H

H

W

W

17

LENGTH: 12 FT | PACK SIZE: 12 PCS (SCA: 40 PCS)


MIL SCA STI

CM3330 W=3/4”, H=1/10” • • •

3/32” insert cove for resilient sheet goods up to 3/32”.

SPECIALTY TRIM


Stainless Steel Cove Cap for use on the wall to provide a coved finish. Can be sealed with silicone to offer excellent resistance to dirt build up. Accepts materials up to 3mm (1/8”) thick.

H2

H1

W


CM3340 W=3/4”, H=1/8”

1/8” insert cove for resilient sheet goods up to 1/8”.


MIL SCA STI

• • •


STS

CM331 H1=5/16”, H2=7/8”, W=1/8” •

H

W

W

H

18

SPECIALTY TRIM



MIL

CM3220 H=1-3/16”, H=1/2” •

Z-Bar is an offset hearth metal for installing carpet around fireplaces. Provides grip while remaining invisible.



HCA HGA HSI HTI

CM1666 W1=1-7/16”, W2=3/4”, H1=7/16”, H2=5/16”

Pinless Divider for commercial use. Used where glue down carpet meets ceramic, hardwood, laminate, cushion floor on plywood or sheet vinyl on subfloor. (Can be adjusted to accept slightly thinner materials). For high traffic areas.


CM1766 W1=1-1/2”, W2=1-13/16”, H1=7/16”, H2=5/16”

Pinned Divider for commercial use. Used where stretched in carpet meets ceramic, hardwood, laminate, cushion floor on plywood or sheet vinyl on subfloor. (Can be adjusted to accpet slightly thinner materials). For high traffic areas.

• • • •


HCA HGA HSI HTI

• • • •

W

H

W1

W2

H2H1

W1

W2H2

H1

19


CM1162

CM1163

CM1164

1/2”x 1/2”

3/4”x 3/4”

1”x 1”

Angle for use on corners to protect edge. Can also be used as an accent. Can be drilled.


BCL SBK SCA STI

• • • •

• • •

• • • •

•


SCA

LENGTH: 29”, 75”, 36”, 84”, 150” | PACK SIZE: 1 PC

CM3210 W=2-1/4”, H=1/4”

2-1/4” wide SABRE TOOTH STRAIGHT EDGE. Grooves prevent tool from moving by biting into carpet. Allows carpet technician to cut carpet up to 12 feet wide. Clear Anodized to prevent marking carpet.

SPECIALTY TRIM

• •


SCA MIL


CM1680 W1=1-1/18”, W2=2-5/16”, H1=5/16”, H2=7/16”

Adjustable height multi-purpose molding adapts to many applications. Product can be tapped down to accommodate various thicknesses of different flooring materials.

W1

H1W2

H2

W

H

20

CAP TRACK - PINLESS


CM1651

CM1655

CM1658

CM1659

CM1660

H=3/8”, W1=1-1/4”, W2=1/10”

H=3/8”, W1=1-1/4”, W2=5/32”

W1=1/10”, W2=1-1/4”, H=1/2”

W1=1/10”, W2=1-1/4”, H=5/8”

W1=5/32”, W2=1-1/4”, H=11/16”

• •

• •

• •

• •

• •

Pinless Channel for use where rubber backed carpet meets dissimilar flooring.

Pinless Channel for areas where extra strength or height is needed. Extra height for installations where floor covering are over 3/8” high but less than 5/8”. Tack strips can be used when installing under pad.

Profile Numbers Dimensions(Can be used with all 3/16” Leg “E” or “T”

caps)

(Can be used with all 1/8”

Leg “E” or “T” caps)

Finishes

MIL


caps)



Finishes

MIL

LENGTH: 12 FT | PACK SIZE: 25 PCSAVAILABLE IN FLEX (CONTOUR) : 12 PCSALSO AVAILABLE WITH PRE-PUNCHED BASE

W1

W2

H

W2

W1

H

21

CAP TRACK - PINNED

Pinned Channel for use where action backed carpet meets dissimilar flooring. Ultra Pin continuous pinning system for maximum holding strength.



CM1759 W1=5/32”, W2=1-1/2”, H=11/16” • •

Wide Pinned Channel for areas where extra strength or height is needed. Added strength of one piece aluminum track holds up under increased traffic. Ultra Pin continuous pinning system for maximum holding strength. Extra height for installations where floor covering are over 3/8” high but less than 3/4”.

W2

W1

H

CM1751

CM1752

CM1755

W1=1-7/16”, W2=1/10”, H=3/8”

W1=1-1/2”, W2=1/10”, H=3/8”

W1=1-7/16”, W2=5/32”, H=3/8”

• •

• •

• •


caps)



Finishes

MIL

Profile Number Dimensions (Can be used with all 3/16” Leg “E”or “T” caps)

Finishes

MIL

W1

W2

H

22

LUXURY VINYL TILE TRIMVINYL has come a long way over the years. And today it is more luxurious than ever. As a leader in floor trims and moldings. Loxcreen Flooring Group is one of the only companies capable of producing an aluminum luxury floor trim that is not only strong enough to withstand daily traffic, but attractive enough to compliment the beauty of luxury vinyl tile floors.


Reducer for use with Luxury Vinyl Tiles.


SAB STI


SAB STI

LV8703

LV8704

LV8705

LV8503

LV8504

LV8505

LV8303

LV8304

LV8305

H1=1/8” (3mm), H2=1-7/8” (48mm)

H1=3/16” (4mm), H2=1-7/8” (48mm)

H1=7/32” (5mm), H2=1-7/8” (48mm)

W=13/16”, H=1/8” (3mm)

W=13/16”, H=3/16”(4mm)

W=13/16”, H=7/32” (5mm)

W=15/16”, H=1/8” (3mm)

W=15/16”, H=3/16” (4mm)

W=15/16”, H=7/32” (5mm)

• •

• •

• •

• •

• •

• •

• •

• •

• •


J-Molding/End Cap for use with Luxury Vinyl Tiles.


Stair Nosing for use with Luxury Vinyl Tiles.


SAB STI

W

H

W

H

H1

H2

23

BCLBRIGHT CLEAR

DOK*METAL DECOR DARK OAK

CVGCOVENTRY GOLD

GOK*METAL DECOR GOLDEN OAK

HABHAMMERED ANTIQUE BRONZE

HCAHAMMERED CLEAR ANODIZED

HDAHAMMERED DARK BRONZE

HGAHAMMERED GOLD ANODIZED

HSIHAMMERED SILVER

HTIHAMMERED TITANIUM

MILMILL FINISH

SBKSATIN BLACK

SABSATIN ANTIQUE BRONZE

SGASATIN GOLD ANODIZED

SCASATIN CLEAR ANODIZED

STISATIN TITANIUM

STSSTAINLESS STEEL

ALUMINUM FINISHES(Finishes may not appear exactly as shown. Please request a sample prior to placing an order)

24

BROKEN CARTON POLICY

Less than full cartons may be purchased on select items with a minimum up charge of 20%, please contact your Customer

Service Representatives for details. No returns will be granted for items that fall below the standard carton/pack size.

LOXCREEN FLOORING GROUP LIMITED WARRANTY

Loxcreen Flooring Group products are warranted for a period of 1 (one) year from date of shipment. All products will be subject

to the following manufacture warranties; Products will conform to original product and contract description with only such

reasonable variations as is acceptable in the trade. These products will be fit for the purposes for which they were intended and

that they will be professionally packaged and labeled. Loxcreen Flooring Group will replace any defective product found if said

defect is identified before installation. If a defect is found after installation, Loxcreen Flooring Group must be notified in writing

within 10 days of installation. The customer must then, at Loxcreen Flooring Group’s discretion, allow an inspection of the

installation. If upon inspection, Loxcreen Flooring Group determines the product to be defective, Loxcreen Flooring Group will

at its own discretion supply replacement materials that conform to the contract requirements or issue a credit equal to but not

exceeding the original purchase price for the goods in question. Loxcreen Flooring Group assumes no liability or responsibilities

for labor or the cost of other materials used in such installations.

These warranties do not circumvent any individual product category warranties implied or stated by Loxcreen Flooring Group.

Warranties do not apply to the following specified items, terms and conditions: A. Exact matching of color, shade, texturing or mottling.B. Any warranties, other than expressed above, implied or promised by any sales representative. C. Tears, scratches, burns, or other damage caused by improper installation, improper use or maintenance. D. Sales of “Seconds”, or “Imperfect” goods. E. Problem caused by moisture, hydrostatic pressure or alkali in the sub-floor. F. Problem caused by installation with non-approved adhesive. If you are unsure about the suitability of a particular adhesive, please call us for our recommendations. G. Product installed outdoors. Loxcreen Flooring Group products are designed for interior use only. H. Color degradation caused by sunlight or other U.V. exposure. These warranties are supplied in lieu of any other warranty, expressed or implied. All product specifications are subject to change without notice.

25

NOTES

26

NOTES

5720 Ambler DriveMississauga, ON, L4W 2B1Telephone: 1 800 565 6653E-mail: [email protected]: www.loxcreenflooring.com

CARPET METAL & SPECIALTY ACCESSORIES · seam binders cm1342 .....pg.08 cm1344 ..... pg.08 cm1142...

Documents

Transcript of CARPET METAL & SPECIALTY ACCESSORIES · seam binders cm1342 .....pg.08 cm1344 ..... pg.08 cm1142...