CARCASS SPLITTING BANDSAW Model Buster IV...CARCASS SPLITTING BANDSAW Model Buster IV DriveElectric...
Transcript of CARCASS SPLITTING BANDSAW Model Buster IV...CARCASS SPLITTING BANDSAW Model Buster IV DriveElectric...
![Page 1: CARCASS SPLITTING BANDSAW Model Buster IV...CARCASS SPLITTING BANDSAW Model Buster IV DriveElectric Model Buster IV Motor Power 3.3 hp 2500 W Operating Voltage 460 / 230 V, 3 phase,](https://reader033.fdocuments.net/reader033/viewer/2022052817/60b01458a0e08a42f17c9cd4/html5/thumbnails/1.jpg)
The Jarvis Model Buster IV -electrically powered bandsaw for splittingcattle, pigs and sows.
• Used in all major U.S. plants for splitting fat cattle (800 - 1050 lbs / 360 - 480 kg).
• Smaller and better handling for optimum performance in the most demanding applications (up to 180 beef / hour / saw).
• Superior blade life: 400 - 600 carcasses per blade.
• Best possible hygiene - spoked wheels, flat surfaced housings and completely opening doors - for fast, easy and complete cleaning.
• The drive system is oil bath lubricated for sustained trouble-free operation.
• Designed for the operator - ultra-thin rail for unobstructed vision and dual rear handles for comfort.
• Anti-tie down controls and totally enclosed electric motor for operator safety.
• Meets national and international requirements for hygiene and safety.
THE BUSTER SAW - HIGH PERFORMANCE CARCASS SPLITTING
CARCASS SPLITTING BANDSAWModel Buster IV
![Page 2: CARCASS SPLITTING BANDSAW Model Buster IV...CARCASS SPLITTING BANDSAW Model Buster IV DriveElectric Model Buster IV Motor Power 3.3 hp 2500 W Operating Voltage 460 / 230 V, 3 phase,](https://reader033.fdocuments.net/reader033/viewer/2022052817/60b01458a0e08a42f17c9cd4/html5/thumbnails/2.jpg)
Specifications
Products for the meat and poultry industry
CARCASS SPLITTING BANDSAWModel Buster IV
Drive Electric
Model Buster IVMotor Power 3.3 hp 2500 WOperating Voltage 460 / 230 V, 3 phase, 60 Hz other voltages and 50 Hz availableCapacity 180 head / hourControl Handles Electric Dual Anti-tie DownDistance between Guides 17.75 in 451 mmBlade Length 119.0 in 3023 mmOverall Length 54 in 1372 mmDrive Wheel Speed 620 rpmWeight 190 lbs 86 kgVibration less than (<) 128 dB <2.5 m / sec2
Noise (3.3 feet / 1 meter from tool) (<) 85 dB
Jarvis Products Corporation · 33 Anderson Road · Middletown, CT 06457-4926 · United States of America Telephone (860) 347-7271 · Fax (860) 347-9905 · [email protected] · www.jarvisproducts.com
Model Buster IV 42 V, 3 phase, 3 hp, 50 Hz* 4006088 460 / 230 V, 3 phase, 3 hp, 60 Hz* 4006030 460 / 230 V, 3 phase, 5 hp, 60 Hz* 4006171Standard Blade (119 inches) 1023101Cut Through JET Blade (119 inches) 1023622Cut Tooth Blade (119 inches) 1023339JET Blade (119 inches) 1023619Spring Balancer 4042052Air Balancer 108 in / 2743 mm travel, 48 in / 1219 mm cylinder (overall length) 4042016 108 in / 2743 mm travel, 48 in / 1219 mm cylinder (overall length) SS** 4042059 108 in / 2743 mm travel, 120 in / 3048 mm cylinder (overall length) 4042020 ** Stainless Steel
Equipment Selection and Accessories Order Number
* For other configurations: please specify voltage, hertz and intended country of operation when ordering.