Remote Gate,Automatic Gate,Sliding Gates, Auto Gate, Gate Opener
Cantilever Slide Gates - Turnstiles Gate Operators ... · PDF fileThis one piece design is...
2
SECTION 32 31 13.15 Chain Link Cantilever Slide Gates PART 1 GENERAL 1.01 SECTION INCLUDES A. Internal roller aluminum cantilever slide gates. 1.02 WARRANTY A. Manufacturer shall provide a limited warranty against failure for the gate, rollers and other parts for a period of 7 years. Failure being any manufacturing defect that prohibits normal operation. (see Secure-Trac warranty for more coverage details) PART 2 PRODUCTS 2.01 MANUFACTURER A. Chain link fences, gates, and operators must be obtained from a single source. B. Approved Manufacturer: Merchants Metals Phone: (888) 260-1600 Fax: (281) 372-3801 2.02 INTERNAL ROLLER ALUMINUM CANTILEVER SLIDE GATE A. Gate Frame: Made in accordance with ASTM F 1184 Type II Class 2, and in compliance with UL-325, and ASTM 2200. (No substitution) Gate to be made of Aluminum Alloy 6005-T61. All square members are 2” sq. weighing 0.94 lb/FT (139 kg/m). Complete frame welded to top (HI-STRENGTH) one piece track and top frame member and 4” x 2” bottom rail weighing 1.71 lbs./ft (2.54 kg/m) Supply 2 truck assemblies that are swivel type having lubricated and scaled ball bearing wheels that have a dynamic load rating of 18,000 lbs. And a 5/8” (16 mm) diameter stainless steel bolts which have a load rating of 11,000 pounds. Gates 31’0” (9449 mm) thru 40’0” (12192 mm) dual top tracks member weighing 6.36 lb/ft (9.45kg/m). The bottom rail 4” x 2” weighing 1.71 lb/ft (2.54 kg/m). Top tracks require two additional truck assemblies. For gates over 40’0” (12192 mm), contact the manufacturer for custom drawings and specs. B. Gate Finish (Frame) Choose one: Natural Aluminum or Polymer Coated in color to match fence C. Chain Link Filler Choose one: Galvanized After Weaving or Aluminized or Thermally Fused & Bonded PVC Available colors - black, green, brown and bronze. D. Diagonal adjustable 1/4” (6 mm) stainless steel truss cables (2) provided inside each panel of the gate. (One each direction). E. Gate posts are 4” O.D. (101.6 mm) schedule 40 weighing 9.11 lb/ft (13.6 kg/m). Single gates with single tracks require 3 gate posts. (1 latch post and 2 support posts) Single gates with dual tracks require 5 gate posts. (1 latch and 2 dual support posts) Double gates require twice the number of support posts but do not have a latch post. PART 3 EXECUTION 3.01 GATE INSTALLATION A. Set posts in concrete. Dig holes having a diameter 4 times the diameter of the post, and 6” (152 mm) deeper than the bottom of the post. Posts set a minimum depth of 36” (914 mm) for all cantilever gates. FENCE SOLUTIONS IN ORNAMENTAL • CHAIN LINK • WOOD • PVC • ACCESS CONTROL • TEMPORARY WWW.MERCHANTSMETALS.COM 866-888-5611 Secure-Trac ® Internal Roller Cantilever Slide Gates SECURE-TRAC® © 2008 Merchants Metals All Rights Reserved MM ### ST 07/09 M E R C H A N T S M E T A L S SPECS & DRAWINGS @ MERCHANTSMETALS.COM Standard Opening Standard Support Overhang 10’0” (3048 mm) 6’6” (1981 mm) 11’0” (3354 mm) through14’0” (4267mm) 7’6” (2286 mm) 15’0” (4572 mm) through 22’0” (6706 mm) 10’0” (3048 mm) 23’0” (7010 mm) through 30’0” (9144 mm) 12’0” (3657 mm) 31’0” (9449 mm) through 40’0” (12192 mm) 16’0” (4876 mm) Cert no. XXX-XXX-000 AIA Continuing Education An Oldcastle Company Merchants Metals is one of the largest manufacturers and distributors of fence systems in the nation. The company’s complete line of fencing solutions for residential, commercial and industrial applications includes: All Merchants Metals products are available through professional fence contractors nationwide. To find out more about Merchants Metals and the fencing solutions we offer, please call 866.888.5611 or visit www.merchantsmetals.com. [email protected] 866.888.5611 www.merchantsmetals.com a division of MMI Products, Inc. ORNAMENTAL CHAIN LINK WOOD PVC ACCESS CONTROL FENCE CHAIN LINK MANUFACTURERS ® INSTITUTE Hot Dipped Galvanized Chain Link • Color Coated Chain Link • Steel Ornamental in Both Component • and Fully-Welded Systems Aluminum Ornamental Systems • Wood Fence • PVC Fence • Temporary Fence • Aluminum Track Gates • Access Control Products • Guardrail • Pre-hung Security Gates • Additional Fence Solutions
Transcript of Cantilever Slide Gates - Turnstiles Gate Operators ... · PDF fileThis one piece design is...
SECTION 32 31 13.15Chain Link Cantilever Slide Gates
PART 1 GENERAL1.01 SECTION INCLUDES A. Internal roller aluminum cantilever slide gates. 1.02 WARRANTY A. Manufacturer shall provide a limited warranty against failure for the gate, rollers and other parts for a period of 7 years. Failure being any manufacturing defect that prohibits normal operation. (see Secure-Trac warranty for more coverage details)PART 2 PRODUCTS2.01 MANUFACTURER A. Chain link fences, gates, and operators must be obtained from a single source. B. Approved Manufacturer: Merchants Metals Phone: (888) 260-1600 Fax: (281) 372-38012.02 INTERNAL ROLLER ALUMINUM CANTILEVER SLIDE GATE A. Gate Frame: Made in accordance with ASTM F 1184 Type II Class 2, and in compliance with UL-325, and ASTM 2200. (No substitution) Gate to be made of Aluminum Alloy 6005-T61. All square members are 2” sq. weighing 0.94 lb/FT (139 kg/m). Complete frame welded to top (HI-STRENGTH) one piece track and top frame member and 4” x 2” bottom rail weighing 1.71 lbs./ft (2.54 kg/m) Supply 2 truck assemblies that are swivel type having lubricated and scaled ball bearing wheels that have a dynamic load rating of 18,000 lbs. And a 5/8” (16 mm) diameter stainless steel bolts which have a load rating of 11,000 pounds.
Gates 31’0” (9449 mm) thru 40’0” (12192 mm) dual top tracks member weighing 6.36 lb/ft (9.45kg/m). The bottom rail 4” x 2” weighing 1.71 lb/ft (2.54 kg/m). Top tracks require two additional truck assemblies. For gates over 40’0” (12192 mm), contact the manufacturer for custom drawings and specs. B. Gate Finish (Frame) Choose one: Natural Aluminum or Polymer Coated in color to match fence C. Chain Link Filler Choose one: Galvanized After Weaving or Aluminized or Thermally Fused & Bonded PVC Available colors - black, green, brown and bronze. D. Diagonal adjustable 1/4” (6 mm) stainless steel truss cables (2) provided inside each panel of the gate. (One each direction). E. Gate posts are 4” O.D. (101.6 mm) schedule 40 weighing 9.11 lb/ft (13.6 kg/m). Single gates with single tracks require 3 gate posts. (1 latch post and 2 support posts) Single gates with dual tracks require 5 gate posts. (1 latch and 2 dual support posts) Double gates require twice the number of support posts but do not have a latch post.PART 3 EXECUTION3.01 GATE INSTALLATION A. Set posts in concrete. Dig holes having a diameter 4 times the diameter of the post, and 6” (152 mm) deeper than the bottom of the post. Posts set a minimum depth of 36” (914 mm) for all cantilever gates.
FENCE SOLUTIONS IN ORNAMENTAL • CHAIN LINK • WOOD • PVC • ACCESS CONTROL • TEMPORARY WWW.MERCHANTSMETALS.COM 866-888-5611
Secure-Trac®
Internal Roller
Cantilever Slide
Gates
S e c u r e - T r a c ®
© 2008 Merchants Metals All Rights Reserved M M # # # S T 0 7 / 0 9
ME
R C H A N T S M E T AL
S
SPECS & DRAWINGS @ MERCHANTSME TALS.COM
Standard Opening Standard Support Overhang
10’0” (3048 mm) 6’6” (1981 mm)
11’0” (3354 mm) through14’0” (4267mm) 7’6” (2286 mm)
15’0” (4572 mm) through 22’0” (6706 mm) 10’0” (3048 mm)
23’0” (7010 mm) through 30’0” (9144 mm) 12’0” (3657 mm)
31’0” (9449 mm) through 40’0” (12192 mm) 16’0” (4876 mm)
Cert no. XXX-XXX-000
AIA Continuing Education
An Oldcastle Company
Merchants Metals is one of the largest manufacturers and distributors
of fence systems in the nation. The company’s complete line of fencing
solutions for residential, commercial and industrial applications includes:
All Merchants Metals products are available through professional fence
contractors nationwide.
To find out more about Merchants Metals and the fencing solutions we
offer, please call 866.888.5611 or visit www.merchantsmetals.com.
866.888.5611
www.merchantsmetals.com
a division of MMI Products, Inc.
OrNaMeNTaL
CHAIN LINK
WOOD
PVC
acceSS cONTrOL
FENCE
CHAIN L
INK
MANUFACTURERS ® IN
STITUTE
Hot Dipped Galvanized Chain Link•Color Coated Chain Link•Steel Ornamental in Both Component •and Fully-Welded SystemsAluminum Ornamental Systems•Wood Fence•
PVC Fence•Temporary Fence•Aluminum Track Gates•Access Control Products•Guardrail•Pre-hung Security Gates•
Additional Fence Solutions
Secure-Trac® Cantilever Slide Gates
combine the highest quality materials
and workmanship to ensure years of
maintenance free service. The use of high
alloy aluminum results in superior strength with reduced weight compared
to other gates and the enclosed roller system eliminates the safety issues
associated with external rollers.
All welded construction ensures a rigid assembly. The easy opening
full cantilever design works well with electric or hydraulic gate operator
systems, and the enclosed roller system is virtually unaffected by ice,
snow, dirt or other debris.
M E R C H A N T S M E T A L S
S e c u r e - T r a c ®
W W W . M E R C H A N T S M E T A L S . C O M
S e c u r e - T r a c ®
With chain link Secure-Trac gates®, the chain link fabric is factory installed. We stretch the fabric in four directions so that each strand of wire acts as a truss increasing support to the frame. Some manufacturers only stretch their fabric in one direction ultimately working against the frame by merely adding weight.
Every Secure-Trac® Internal Roller Cantilever Slide Gate can be electrically or manually operated.
Internal Roller Track: The backbone of our Secure-Trac® gate, the internal roller track is a one piece extrusion consisting of the track and the top 2” square frame member. This one piece design is welded as part of the gate frame, adding needed strength and rigidity, as opposed to gates with “bolt-on” tracks.
Uprights: The upright members, which are also 2” square, are welded to the internal roller track. The uprights are evenly spaced along the length of the gate frame and are never more than 8’0” apart.
Bottom Frame Members: The bottom member of the gate frame is a 2” x 4” rectangular tube which is welded to the 2” upright members, forming a rigid one piece frame and track.
Premium Rigid Frame Construction
Internal Roller Track
2” Uprights
2” x 4” Bottom Frame Members
Inside the track channel is a truck assembly. Both the track and the truck
assembly are designed to withstand a reaction load in excess of 2000 lbs.
The truck bracket assembly is lubricated prior to production to enhance
performance and endurance. (Fig. A)
The Secure-Trac® truck assembly has a swivel bolt that allows rotation in all
directions. This assures even wear of the wheels and less wear and tear on
the gate and the electric operators. (Fig. B)
The Secure-Trac® truck assembly is made to swivel up or down, as well as
side to side, to accommodate the movement of the gate frame. (Fig. C)
Top Roller Assembly
A
B
C
X X X X X
Chain Link Fabric
Aluminum Track
Truck Assembly
2” Sq. Aluminum Upright
Adjustable S.S. Truss Cable
3”
Guide Roller Assembly
4” x 2” Aluminum Bottom Rail2” Sq. Aluminum Upright
4” SquarePost
Inside
Outside
H
To Open
Auto OperatorFence Line
End Bays Middle Bays End Bays
GOpening (10’ - 0” (3048MM) Thur 30’ - 0” (9144MM)
Stainless Steel Truss Cable
2” Sq. Aluminum Upright
2” Sq. Aluminum Upright
Secure-Trac® Gates are available with picket or chain link fillers
With ornamental picket gates (pointed picket style shown above), all pickets are welded between upper and lower frame members, increasing support and rigidity to the overall gate frame.
X X X X X X
Inside
OutsideTo Open
Opening
Auto OperatorFence Line
G
Overhang
Truck Assembly
Aluminum Track
2” Sq. Aluminum Upright
Adjustable S.S. Truss Cable
3”
4” Square PostGuide Roller
Assembly4” Typ.
Turnbuckle
Aluminum Gusset
2” Sq. Aluminum Upright
4” x 2” Aluminum Bottom Rail
4” Square Post
H
6”
Stainless Steel Truss Cable
2” Sq. Aluminum Upright
1” Pickets
Truss SupportsWelded Pickets
Secure-Trac® Gates Size AdjustmentsSecure-Trac® gates can be built to accommodate a wide range of openings. Single gates accommodate 10’ – 40’ openings
and double gates accommodate 20’ – 80’ openings. (Any single gate more than 30’ wide will have two internal tracks.)
Track Bracket Truck
Assembly
Truck Assembly
Nylon Guide Roller W/ Oilite Bearing
Alum Track / Frame Member
Top Track / Frame Member of Gate Frame
U-Bolt
Post
Bottom Gate Frame Member
U-Bolt
Track Bracket
Gate Frame 4” x 2” Member
Lower Guide Roller Ass’y w/ Cover
Cantilever Gate End View
Upper Roller Assembly
GATE PROFILES 10’ – 30’
Aluminum Track / Rail
2” Square Aluminum Upright
2” x 4” Square Aluminum Rail
Fully Welded Construction•
Enclosed Roller System•
6005-T6 Aluminum Alloy Construction•
7 Year Limited Warranty•
Manual or Mechanically Operated•
Welded Gussets •
Stainless Steel Braided Truss Cable •
Powder Coating (additional charge)•
LI M I T E D W A R
RA
NT
Y
ME
RC
H
AN T S M E T A L
S
GATE PROFILES 31’ – 40’
Aluminum Track / Rail
Aluminum Track / Rail2” Square Aluminum Upright
2” x 4” Square Aluminum Rail
Dual Post
Truck Bracket
Welded Gussets and Truss CablesFor optium frame rigidity, each interior panel is equipped with four welded gussets and a pair fo stainless steel adjustable truss cables. This added support is standard on both ornamental and chain link gates.
