CADD

download CADD

of 54

  • date post

    18-Jan-2016
  • Category

    Documents

  • view

    238
  • download

    0

Embed Size (px)

Transcript of CADD

ADVANTAGES OF CAD

100301129824/5077-10/GTBKIET, Malout

Six Months Industrial Training

At

CAD VISION CENTRESAKCHI, JAMSHEDPURSubmitted in the partial fulfillment of the requirement

for the 8th semester curriculum degree of

BACHELOR OF TECHNOLOGY

In

MECHANICAL ENGINEERING

of

PUNJAB TECHNICAL UNIVERSITY, JALANDHAR

Under the Guidance of :-

Submitted By :-

Mr. Majid Khan

Subham Kumar

Uni. Regd. No. 100301129824

Inst. Roll No. 5077/10

Submitted To :-

Mr. Sumit Sachdeva

Sr. Lecturer (M.E.)

DEPARTMENT OF MECHANICAL ENGINEERING

GURU TEG BAHADUR KHALSA INSTITUTE OF ENGINEERING & TECHNOLOGYCHHAPIANWALI (MALOUT)AcknowledgementWith deep sense of gratitude, I Would like to take this opportunity to thank my Training Co-ordinator Mr. Majid Khan (Trainer), Cad Vision Centre, Sakchi, Jamshedpur who gave his best support & co-ordination during my summer training. His involvement & unstinted support always gives his the confidence to do my work. Without His guidance this project report would not have seen the light of the day. I am also very thankful to Mr. Navdeep Kumar (H.O.D.) Mechanical Engineering, G.T.B.K.I.E.T., Chhapianwali (Malout) for their kind co-opration to complete this report. I would like to thank the people who took their time to help me to complete this project. I would like thanking my friends who were of immense help to me.

Last but not the least, I would like to thank my parents who were a source of support throughout the making of the report.

Thanks

Subham Kumar

TRAINING SCHEDULE

Company Name :- Cad Vision Centre, Sakchi, Jamshedpur

Timing : 11:00 a.m. to 3:00 p.m.

First Month

-Institute & Courses Information

Second Month

-Autocad Information

Third Month

-Coordinate System

Fourth Month

-Objects of Autocad

Fifth Month

-Blocks, Window, Layers

Sixth Month

-Arrays

LIST OF FIGURES

Fig. No.Description

Page No.

1.1

Logo of Cad Vision Centre

1

1.2

Cad Vision Centre

1

1.3

Classes

2

2.1

Cad / Cam Technology

8

2.2

General Procedure

10

2.3

3-D Model

16

3.1

Autocad

17

3.2

Polar Coordinate System

18

3.3

Object Snaps

21

4.1

Autocad

22

4.2

Autocad Symbols

23

4.3

Lines

25

5.1

Blocks Working

34

6.1

Autodesk

35

8.1

Object Layers

38

8.2

Objects Copying

39

9.1

Array Command

41

9.2

Array

42

10.1

Move Command

43

10.2

Rotating Command

43

TABLE OF CONTENTS

Acknowledgement

iii

Training Schedule

iv

List of Figures

v

List of Tables

vi

Chapter No.Nomenclature

Page No.

CHAPTER-1

1.1 CAD VISION CENTRE

1-61.2 PROFILE

1.3 Placement Cell:

1.4 Alumini Cell:

1.5 Facilities

1.6 Computer Lab:

1.7 Library:

1.8 Student Activities:

1.9 Institute-Industries Tie-Up:1.10 ENGINEERING SERVICES

1.11 CLIENTS of CAD VISION CENTER

chapter-2

7-162.1 Scope of CAD/CAM/CAE

2.2 WORKING WITH CAD/CAM/CAE

2.3 Geometric modeling

2.4 Engineering Analysis

2.5 Simulation

2.6 Drafting

2.7 Need analysis

2.8 Specification and requirement

2.9 Feasibility study

2.10 Creative design syntesis

2.11 Preliminary design & devolopement

2.12 Detalied design

2.13 Prototype building &testing

2.14 Design for production

2.15 DIFFERENT TYPES OF CAD/CAM

2.15.1 CAD tools required to support

2.16 THE CAD/CAM MARKET TRENDSCHAPTER-3

17-213.1 WORKING WITH COORDINATE SYSTEMS

3.2 ABSOLUTE & RELATIVE COORDINATE 3.3 CARTESIAN COORDINATE SYSTEM

3.4 POLAR COORDINATE SYSTEMS

3.6 SNAPING TO POINTS ON OBJECTS

CHAPTER-4

22-334.1 CREATING OBJECTS IN AUTOCAD

4.2 LINE

4.3 POLYLINE

4.4 MULTILINE

4.5 Creating Multiline Styles

4.6 POLYGON

4.7 SKETCH

4.8 RECTANGLE

4.9 CIRCLE

4.10 ARC4.11 SPLINE

4.12 ELLIPSE

4.13 DONUT

4.14 POINT

4.15 HATCHING AREAS

4.16 TEXT

4.17 MULTILINE TEXT

CHAPTER-5

345.1 WORKING WITH BLOCKS

CHAPTER-6

35-366.1 EDITING METHODS

6.1.2 EDITING WITH GRIPS

CHAPTER-7

377.1 USING THE PROPERTIES WINDOW

CHAPTER-8

38-408.1 EDITING LAYERS

8.2 MATCHING PROPERTIES

8.3 COPYING THE OBJECTS

8.4 OFFSETTING THE OBJECTS

8.5 MIRRORING THE OBJECTSCHAPTER-9

41-429.1 ARRYING OBJECTS

CHAPTER-10

43-4510.1 MOVING THE OBJECTS

10.2 ROTATING OBJECTS

10.3 ALIGNING THE OBJECTS

10.4 ERASING THE OBJECTS

10.5 STRETCHING THE OBJECTS

10.5 Moving by Stretching:

CHAPTER-11

4611.1 CONCLUSION

CHAPTER-12

4712.1 REFERENCESCHAPTER-1

1.1 CAD VISION CENTRE

Fig. 1.1 : Logo of Cad Vision Centre

We are Jamshedpur based young and professionally managed organization equipped with state-of-art infrastructure to serve the best in the field of CAD. We always try to share the problem and come up with the solution which add few values in young growth process. We are sincerely involved in computer aided Digitizing, Designing & Development works and 100% focused on Mechanical, Structural, Civil, Electrical & Training activities.

Fig. 1.2 : Cad Vision Centre

CAD VISION CENTER, is situated in the heart of Jamshedpur Ambagan, Sakchi. The office has a space of 900sq.ft. It has 18 Nos. Computer since its inception with a plotter for printing A1 size. This institute has got its own legal software 2009. We have been imparting training to students in a batch. In the field of auto cad training which is an unique feature and we stand as a leading training institute in the state of Jharkhand.

In present era of modernization and volatile market situation, one must need a helping hand to support & to become a market leader. In todays competitive market, only new ideas, innovation, quality works, time frame and cost effectiveness in every possible way can make all the difference.

We strongly believe that only a well-focused & qualified team can fulfill the need of training. We are running Computer-Aided-Design training program for students and working people on full time or part time basis by sound, qualified and experienced engineers. We also offer corporate level training program to upgrade their skills. We are the only company in Jamshedpur who are 100% dedicated to CAD related activities.

Fig. 1.3 : Classes

1.2 PROFILE

Our Commitment to Excellence in providing our customers with extremely accurate, reliable and high performance products.

(Design & Drawing) and services is the key to our success and will be underlying tenet in all our endeavors. Innovative systems, experience and highly motivated Specialists designers & draughtsmen ensure cost-effective, on-time solutions that maximize customer satisfaction and the value provided.The Institute in its academic curriculum imparts certificate courses in following fields.

S.No.

Courses Offered

Duration

1

Mech. Drafting With Cad

6 Months

2

Civil Drafting With Cad

6 Months

3

Auto cad only

6 Months

4

3ds max

3 Months

5

Mech. + Civil

9 Months

6

Mech.Drafting only

6 Months

7

Civil Drafting only

6 Months

8

Mech. + Civil Drafting

6 Months

To provide the students with a still sharper edge in the employement segment, the institute provide students with extensive instructions and practice facility on computer with the aid of Models like piping circuit, steel building, frame structure building, assembly of machine equipments, measuring instruments etc.1.3 Placement Cell:

The Institute has a solemn Placement Cell which maintains close liaison with a large number of Industries with a view to provide placement services to the students. A number of students have been absorbed in reputed companies like TATA MOTORS, MULTICOLOR Ltd., VASTU VIHAR, SANDHU TECHNOCRATS Pvt. Ltd., TAURAS FLEXIBLES Pvt. Ltd. etc in INDIA. Many of our students are employed in abroad also.

1.4 Alumini Cell:

An Alumini cell has been formed by the EX-Students of CVC with the prudent help and support from the current students and faculties. The main aim is to stay together in a amalgamated fashion and mutually help each other under all tryingcircumtance likewise finding and improving courses jobs.1.5 Facilities

We provide the following facilities to the students.

1.6 Computer Lab:

The Institiute has a well equipped Advanced Computer Lab with all Modern Infrastructures consisting eighteen(18) computers with latest configurations.

1.7 Library:

The Institute has a well furnished library having sufficient number of titles on all relevant courses. The students also have access to important news papers in English, Hindi and Urdu and national and