Cable Junctions- Logic Simple
1
V10 Drawn by Bernard 5/10/2009 Feuille 1 /1 N/D Z.I Perwez, B-1360 Perwez, Belgium Tel +32 81 26 50 80 Fax +32 81 26 50 90 Email [email protected] GB www.ocea.be Cable Junctions- Logic Simple Cables arriving from the control panel - plant room The connections between motor cable and the cables from the control panel (5 x 1.5mm² + 24VDC power supply) are to soldered and be made in a resin sealed junction box The cables must be in a manhole or chamber so that easy access is available. Water tight corrugated pipe which must go above the water level. Pipe must be fixed to the sleeve with a stainless steel color clamp. This scenario applies to paved or other types of pool surrounds. The motor cable does not exceed 3M. Avoid sharp bends in the pipes.
Transcript of Cable Junctions- Logic Simple
V10
Drawn by Bernard
5/10/2009 Feuille 1 /1
N/D
Z.I Perwez, B-1360 Perwez, BelgiumTel +32 81 26 50 80 Fax +32 81 26 50 90
Email [email protected]
www.ocea.be
Cable Junctions- LogicSimple
Cables arriving from the control panel - plant room
The connections between motor cable and the cables from the control panel
(5 x 1.5mm² + 24VDC power supply) are to soldered and be made in a resin sealed junction box
The cables must be in a manhole or chamber so that easy access is available.
Water tight corrugated pipe which must go above the water level.Pipe must be fixed to the sleeve with a stainless steel color clamp.
This scenario applies to paved or other types of pool surrounds. The motor cable does not exceed 3M.Avoid sharp bends in the pipes.
