Business Unit Technology General Laboratory End of ...direct.dksh.com.au/INS/EOFY/2018/DKSH_INS_EOFY...

Scientific InstrumentationAustralia

Business Unit

Technology

End of financial year saleGeneral Laboratory

2018

2All prices exclude GST and freight charge! Offer ends July 30, 2018.

DKSH General LaboratoryEnd of financial year sale

$925Ea.

Product advantages:• Broad Sensitivity Range: No other

system is more sensitive; As high as 0.001 EU/mL with Pyrotell®-T or Pyrochrome® lysate

• Increased Efficiency: The ability for end-users to add samples to an existing run in order to efficiently utilize all wells. Software provides quantitative sample results while assay continues to run

• Flexible Testing: Variable volumes and ratios can be utilized, ability to increase product MVD (Maximum Valid Dilution)

• Reduced Lysate Usage: As little as 50 µL per test

• Independently timed push & pull wells: Allows for more samples to be added to a continuous run

Product features:• Runs Both Chromogenic and

Turbidimetric Assays • Precise Temperature Control-incubator

temperature is held to 37°C ± 0.5°C • Solid State Design-low maintenance • Dual-wavelengths • Low Cost Depyrogenated Disposables

Ordering information

Part No. PKF32.Demo

Includes: • Lower Buffer Chamber • Upper Buffer Chamber/Cooling Core • Safety Lid with High Voltage Leads • Casting Cradle w/Sealing Gasket Set • Casting Clamp Assemblies-2 pcs • Cams-4 pcs • Glass Plates, Rectangular, 10 x 8 cm-10

pcs

• Alumina Plates, Notched, 10 x 8 cm-2 pcs

• Spring Clamps-4 pcs • Combs, 10 well-2 pcs • T-Spacers-4 pcs • Well locating Decals-2 pcs • Gel Seal


Part No. SE260-10A-.75

$5000 Ea.(demo unit)

Includes:• Lower Chamber w/Heat Exchanger • Safety Lid w/High Voltage Leads • Electrode Panels -2 pcs • Cassettes-4 pcs • Foam Sponges, 6 mm thick-4 pcs

• Foam Sponges, 3 mm thick-8 pcs• Cassette Hook• Blotter Paper (9 x 10.5 cm)-25 sheets


Part No. SUBHT

High Throughput Submarine Gel Electrophoresis Unit

Ideal for high throughput screening applications like single strand polymorphism (SSP) analysis following PCR.

$615Ea.

Mighty Small II Deluxe Mini Vertical Electrophoresis Unit (Complete) with 10 Well 0.75Mm Combs & Spacers $700

Ea.

Mighty Small Transfer Tank

Includes:• Lower Chamber w/Heat Exchanger • Safety Lid w/High Voltage Leads • Electrode Panels -2 pcs • Cassettes-4 pcs • Foam Sponges, 6 mm thick-4 pcs

• Foam Sponges, 3 mm thick-8 pcs• Cassette Hook• Blotter Paper (9 x 10.5 cm)-25 sheets


Part No. TE22

Associates of Cape Cod Endoxotin instrumentationPyros Kinetix Flex 32-well (includes instrument and software)



• Small, light, compact footprint - flat top surface allows units to be stacked in storage

• Can hold any combination of aluminium insert blocks

• Digital models enable highly accurate temperature precision

• Temperature range from ambient + 5°C to 200°C

• Fast heat-up rate: 25°C to 200°C in 8 minutes

• Advanced temperature control. Temperature stability at 37°C ± 0.1°C

• Bright orange 5-digit LED digital display for fast and accurate setting of temperature and timer

• Accurate, reproducible, rapid and safe heating of your samples

• High quality, precision-engineered blocks provide excellent thermal contact


Part No. Description Sale price

DB200/2 Techne Dri-block heater 200°C, 2 blocks (230V) $900 Ea.

DB100/2 Techne Dri-block heater 100°C, 2 blocks (230V) $900 Ea.

• Ideal for chilling reagents for the whole working laboratory day

• Maximum temperature range 0°C to 40°C

• Temperature displayed in °C or °F

• N°ICE bucket and 1.7Kg autoclaveable ceramic-coated beads are included

• Spare aluminium bucket and spare 1.7Kg pack of ceramic-coated beads are available separately



FNOICE Techne NoICE electronic ice bucket $800 Ea.

FNOICE.DEMO Techne NoICE electronic ice bucket $600 Ea.

• Fast evaporation of solvents from any sample vessel

• Unit is light and compact enough for convenient use in a fume cupboard when toxic solvents are being evaporated


Part No. FSC400D

Techne Dri-block heaters 200°C, 2 blocks (230V)

Techne NoICE electronic ice bucket

$950Ea.

• Tube size (diameter): 0.2ml microtube• Number of holes: 72• Size (d x w x h) mm: 95 x 76 x 51

Techne Dri-block insert, 0.2ml microtubes


Part No. F4471

Techne Sample Concentrator Gas Chamber & stand (for tubes) Requires DB-3 Dri-block and one pack of needles

$129Ea.



Specifications• Time: 1 second - 99 hours• Power Levels: Low, Medium, High• Selectable Ramp Rates: 5 - 300rpm/sec• Memory: Up to 4 user-defined profiles• Stirring Speed: 10-1800 RPM • Maximum Capacity: 5.0 Kg (11 lb)

• Weight: 1.0 Kg (2.2 lb) • Dimensions: (D x W x H) 200 x 160 x

55mm

Specifications• Speed (Analog): 750 - 3200 RPM (2700

RPM for 50Hz models)• Speed (Digital): 500-3000 RPM (2850

for 50Hz models)• Time (Analog): 1 - 60 minutes or

continuous• Time (Digital): 0-99 minutes or

continuous• Pulse - ON/OFF: 0.1 seconds - 99

minutes

• Vortexing Orbit: 1.0mm diameter• Maximum Capacity: 1 microplate, any

type with standard SBS footprint • Dimensions (D x W x H): 165 x 165 x

165mm (6.5 x 6.5 x 6.5in)• Weight: 2.75kg (6.1lb)


Part No. SI-0301

$500Ea.


Part No. SI-0401

$400Ea.

Specifications• Speed (Analog) 750 – 3200 RPM (2700

RPM for 50Hz models)• Speed (Digital) 500 – 3000 RPM (2850

for 50Hz models)• Time (Analog) 1 – 60 minutes or

continuous• Time (Digital) 0-99 minutes or

continuous• Pulse - ON/OFF 0.1 seconds - 99

minutes• Vortexing Orbit 1.0mm diameter

• Maximum Capacity 4 microplates, any type with standard SBS footprint (8 with tray)

• Dimensions (D x W x H) 335 x 240 x 165mm

• Weight 3.7kg • Warranty 2-year manufacturer warranty• Markings CE


Part No. SI-4006

$612Ea.

Specifications• Speed (RPM): 10-1200• Maximum Stirring Positions: 4• Timer: 1 second - 99 hours• Power Levels: Low, Medium, High• Selectable Ramp Rates: 5 - 300 rpm/

sec• Product Weight: 7.1 lbs

• Overall (D x W x H): 375 x 325 x 48mm

• Maximum Stirring Capacity: 1 Litre each position

• Markings: ETL listed / CE


Part No. SI-3001

$832Ea.

Multi-MicroPlate Genie, 230V

MicroPlate Genie, 230V

MagStir Genie, 230V

MultiMagStir Genie, 230V



Bag Rotator, 230V

Specifications


Part No. SI-1001

• Speed: Fixed rotation, 3 RPM ±0.5 RPM• Capacity: up to 40 standard 300 ml

transfer packs or random bags• Base Dimensions (DxWxH): 267 x 508 x

252mm

• Weight: 7.7 Kg (17 lb) with basket• Warranty: 2-year manufacturer warranty

$650Ea.

• A 6 channel µ-Slide suitable for flow experiments and for immunofluorescence assays

• All-in-one chamber that simplifies immunofluorescence protocols

• Homogeneous cell distribution over the channel surface, regardless of handling practices

• Cost-effective experiments with small numbers of cells and low volumes of reagents


Part No. 80602

$421Pk.

µ-Slide VI 0.4 Collagen IV: #1.5 polymer coverslip, sterilized

Xp2, Portable Pipet-Aid, Australian, 220 V

• New Ergonomic Design–The most comfortable pipettor you ever laid a hand on

• Three-speed settings provide more precise control for use in the pipette filler mode and the pipette dispenser mode

• New Power Source for Uninterrupted Extended Operation–Can be charged while in use

• New Ultra Quiet Precision Pump–Great control for aspiration or dispensing


Part No. 4-000-501-A

$320Ea.



1-000-00025 Microcap .25 Ul, 32Mm (100 Microcaps and one Bulb Dispenser included) $18.00 Pk

1-000-0005-64 Microcap .5 Ul, 64Mm (100 Microcaps and one Bulb Dispenser included) $25.00 Pk

5-000-1025 Wiretrol I 25 Ul, 100/pack $32.00 Pk

3-000-203-G/.2 Seq. Bores .2 Mm 3 Ul 10/Vl, 100/pack $32.00 Pk

3-000-210-G8 Repl. Bores 10 Ul Spl. 8” Lgth, 100/pack $25.00 Pk



SPROUT® mini-centrifuge

The Sprout® Mini-Centrifuge has SnapSpin™ rotors for easy and fast exchange. It is ideal for quick spin downs, micro-filter cell separations and HPLC samples. It is compact, easy to use and comes with a host of extras.


HS120301 SPROUT™ Green 100-240VAC, 50/60Hz Universal Plug Type

Transformer Cube Tube Rack 15 & 50mL Box, Purple

The Transformer Cube Rack is great for storage of large samples and 15 and 50 mL tubes.For storage of large samples and 15 and 50 mL tubes.Robust, rugged polypropylene construction complete with two Snap-In grids.

• Hold 15 mL - Wells: 16 - Well Dia: 18 mm OR 50 mL tubes - Wells: 9 - Well Dia: 31 mm securely upright in deep grid wells

• Locate tubes easily with keyed lid, imprinted grid and first tube orientation• Use without grids for larger sized product storage• Fill with ice and use as a temporary low temperature workstation— ideal for teaching

labs or those with limited bench space• Clear lid, translucent sides and autoclavable• Measures 4.9 x 4.9 x 5 in (12.5 x 12.5 x 12.9 cm)• Pack of 5• Color: Purple• Autoclavable


HS23271A Transformer Cube Tube Rack 15 & 50mL Box, Purple

Pop-Up Tube Rack

The Pop-Up Rack collapses for compact storage and “pops-up” for quick use, easy open and close.

Collapse for compact storage and “pop-up” for quick use.

Features:• Made from polypropylene• Easy to open — easy to close• Designed to help organize 15 and 50

mL tubes• Imprinted grid aids quick retrieval• Stack racks in open or closed position• Saves space when racks are not in use• Not recommended for cleaning in

autoclave


Part No. Description Sale Price

HS24318 Pop-Up Tube Rack 15mL, Purple, qty 2 per pack $35.00/Pk

HS24319 Pop-Up Tube Rack 50mL, Green, qty 2 per pack $28.00/Pk

HS24320B Pop-Up Tube Rack 15/50mL Combo, Blue, qty 2 per pack $30.00/Pk

$250Ea.

$68Ea.

From

$68



The Rota-Rack® Duo makes dilution and concentration studies made easy. Transfer solutions between 0.2 mL PCR® tubes and 0.5 and 1.5 mL micro centrifuge tubes.

• Made from polypropylene• Rotate and customize to suit your

application needs. 4 combinations possible

• Blue section holds 48 x 0.5 mL and 48 x 1.5 mL microfuge tubes on the reverse side

• Purple section holds 96 x 0.2 mL tubes in a standard array pattern one and 48 x 1.5 mL tubes on the reverse side

• Tapered wells securely suspend tubes and makes removal easy

• Alphanumeric well identification• 296 x 118 x 34 mm• Autoclavable

The Universal Tube Rack is ideal for holding a wide range of tubes with its adjustable slot that adapt to different diameter tubes.

Quickly change tube sizes with this adaptable polypropylene rack. Open the well with a turn of the knob or directly insert a tube into the opening.

• Made from polypropylene• Imprinted references for easy

identification• Generously-sized handles for easy

transport• Not recommended for cleaning in

autoclave• Measures 194 x 140 x 51 mm


Part No. HS24330A

$48Ea.

Universal Tube Rack, Purple/White

The Fold and Snap Test Tube Rack is economical and durable. It is easy-to-assemble, simple fold and snap together.

• Ships flat in one piece• Easy-to-assemble polypropylene racks

fold and snap together

• Available in 4 different colors for 3 popular tube sizes

• Autoclavable

Rota-Rack® Duo Tube Rack, Blue


Part No. HS29041A

$32Ea.


Part No. HS243077B

Fold & Snap Tube Rack 17mm 60-Place, Blue

$12Ea.



For use with SA8, pack contains:• 1 x plastic cradle for standard microtitre

plate• 1 x circular foam insert for beakers and

flasks (up to 500ml capacity)• 1 x rectangular foam insert (holds 8

x 0.2ml, 8 x 0.5ml and 16 x 1.5ml microcentrifuge tubes)

• 1 x solid rectangular foam insert (blank for custom holes)

Please note: The microtitre plate holder SA8/1 should not be used at speeds above 800rpm.

• Temperature range: Ambient +8°C to 130°C

• Temperature stability at 37°C: ±0.1°C• Uniformity within block at 37°C: ±0.1°C• Uniformity within block at 130°C: ±1°C• Dimensions (w x d x h): 235 x 280 x

115mm

• Net weight (without blocks): 2.1kg• Heater power: 300W• Electrical supply: 230V, 50Hz• *Insert blocks not included


Part No. SBH130

Stuart Block Heater analogue 130°C$650

Ea.

• Temperature Range: Ambient +8°C to 130°C

• Temperature Stability at 37°C: ± 0.1°C • Uniformity Within Block at 37°C: ±

0.1°C • Uniformity Within Block at 130°C: ±

1°C • Display Resolution: 0.1°C• Dimensions (w x d x h): 235mm x

280mm x 115mm

• Net Weight (no blocks): 2.3 kg • Heater Power: 300W• Electrical Supply: 230V, 50Hz• *Insert blocks not included


Part No. SBH130D

Stuart Block heater digital 130°C

$800Ea.

• Variable speed control between 200 and 2500 rpm

• Intermittent or continuous mode• Stable low profile body• Robust die-cast construction


Part No. SA8

Stuart Vortex Mixer, variable speed $400Ea.

Accessory heads for SA8


Part No. SA8/1

$10Ea.



Key features• Shaking action: Orbital• Platform dimensions (w x l):

335 x 335mm• Speed range: 30 to 300rpm

• Orbit / amplitude: 16mm• Maximum load: 10kg


Part No. SSL1

Lab-scale orbital shaker (complete with platform)

• Rocking action: 3D gyratory • Platform dimensions: 235 x 235 mm • Speed range: 5 to 70rpm • Angle of tilt: 3 to 12• Angle adjustable: Yes by hand • Maximum load: 3 kg• Dimensions (w x d x h): 240 x 300 x 165

mm• Tier height, mm: 125/tier

• Operational temp. range: +4 to +40°C• Maximum permissible humidity: 80% • Net Weight: 5.5 kg • Electrical Supply: 230V, 50Hz• IP Rating: 30


Part No. SSM3

Stuart mini-scale 3D gyratory rocker

$1700Ea.

$900Ea.

Three independently controlled stirring positions. Powerful magnets for strong magnetic coupling Stainless steel top plate.

• Plate material: stainless steel• Plate dimensions: 550 x 210mm• Speed range: 100 to 1500 rpm

• Overall dimensions: (w x d x h) 600 x 270 x 110mm

• Net weight: 7kg• Electricity supply: 230V, 50Hz, 150W


Part No. SB161-3

Stuart Stirrer, magnetic, 3 position

$1050Ea.

Key features• Platform dimensions (w x l): 220 x

220mm• Number of plate positions: 4• Speed range: 250 - 1250rpm• Orbit diameter: 1.5mm• Maximum load: 1Kg• Operational temperature: +4 to +40°C

• Maximum permissible humidity: 80%• Overall dimensions (w x d x h): 240 x

300 x 160mm• Electrical supply: 230V, 50Hz, 50W


Part No. SSM5

Stuart Microtitre Plate Shaker

$950Ea.



Robust stainless steel top plate does not produce eddy currents like aluminium and so ensures a very powerful coupling and stirring action.

• Plate Material: Stainless steel • Plate Dimensions, mm: 150 x 150 • Stirrer speed, rpm: 100 - 2000 • Max. stirring capacity: L * 15

• Dimensions (w x d x h), mm: 172 x 248 x 109

• Net weight, kg: 2• Electrical supply: 230V, 50Hz, 50W • IP Rating: 32

50ml centrifuge tube holder for SB2 or SB3, holder can be quickly and easily removed and replaced without the need for tools. Once tube holder is in place tubes can be easily slotted into the holder where they will be securely held.


Part No. SB3/3

Stuart SB3/3 50mL Centrifuge Tube Holder - holds 12 Tubes, 25 to 35mm tube diameter

The SM5 mini stirrer from Stuart is a powerful magnetic stirrer, capable of stirring up to 1 litre, the stirring speed is adjustable up to 2,000rpm. The mini stirrer is available in a choice of designs, please ensure you use the correct order code to receive your chosen model. The unit is made from robust polypropylene with a chemically resistant polycarbonate top.

• Lightweight stirrer• Capable of stirring up to 1L

• Universal power adaptor• Choice of designs• With BioCote antimicrobial protection• Capacity, 1 Litre• Speed, 350 to 2,000 rpm• Weight, 500 g• Dimensions, w x d x h, 143 x 143 x 66

mm


Part No. SM5/STUART

Stuart Mini Stirrer, Stuart Fascia


Part No. US151

Stuart Undergrad Stirrer, magnetic, stainless steel top, 15 x 15cm

• Plate Material: Coated Aluminium Silicon

• Plate Dimensions: 150 x 150 mm• Heated Area: 150 x 150 mm• Heater Power: 700 W• Max plate temp: 325 °C• Stirrer Speed: 100 – 2000 rpm• Maximum Stirring Capacity: 15 L

• Dimensions (w x d x h): 72 x 248 x 120 mm

• Net weight: 2.9 kg• Electrical supply: 230V, 50Hz, 750W• IP Rating: 32


Part No. US152

Undergrad Stirrer hotplate, coated metal top, analogue, 15 x 15cm $500

Ea.

$250Ea.

$251Ea.

$130Ea.



Stuart Magnifier (for Model SC6PLUS Colony Counter)



SC6/1/3 x3 magnification magnifier $92.00 Ea.

SC6/1 x1.7 magnification magnifier $100.00 Ea.

Stuart Aluminium blocks


Part No. Tube (diameter/type) No.of holes Hole size (dia. x depth) mm Sale price

SHT1/16 16mm 12 16.5 x 47 $130.00 Ea.

SHT1/30/1 30mm 4 30.1 x 47 $215.00 Ea.

SHT1/30 0.5ml tubes 30 7.8 (9° taper) $140.00 Ea.

Order information

Part No. Description UOM Sale price

LS011007 3" Cardboard Cryobox, 100 well 100/case $105.00

LP060001 Petri Dish, 90 x 15mm, Polystyrene, Stackable, Undivided Bottom

500/case $50.00

LP060002 Petri Dish, 60 x 15mm, Polystyrene, Stackable, Undivided Bottom, 500/CS

500/case $38.00

LS013312 Frame Type Slide Drawer Freezer Racks, SS, 4 Racks, 4 x 3 Configuration, Fits 12 x 2’’ Standard Boxes

Each $207.00

LS011017 PC Cryogenic Storage Boxes, 25 wells, -196°C - 121°C, 4 Assorted Colours,

24 boxes/case $90.00

DKSH Australia Pty. Ltd.14-17 Dansu Court, Hallam VIC 3803, AustraliaPh: 1800 010 114, Fax: (03) 9554 6677

To request a quote or if you require further information contact your local representative now!

QLD/NT Sales SpecialistAnn-Marie [email protected] 116 562

VIC/SA/TAS Sales SpecialistMarcia [email protected] 215 970

VIC/SA/TAS Sales SpecialistSushen [email protected] 508 664

NSW/ACT Sales SpecialistCarmen [email protected] 026 777

WA Sales SpecialistStephanie [email protected] 149 170

Product ManagerTracee [email protected] 106 899

Business Unit Technology General Laboratory End of ...direct.dksh.com.au/INS/EOFY/2018/DKSH_INS_EOFY...

Documents

Transcript of Business Unit Technology General Laboratory End of ...direct.dksh.com.au/INS/EOFY/2018/DKSH_INS_EOFY...