EOFY Clearance Catalogue

20
www.cairnshardware.com.au HOT DEVIL GAS POWERED TWIN TORCH KIT • Stainless steel burner tube • Lightweight and portable • Auto ignition 5093660 / HD8921BK GRIPWELL ADJUSTABLE TRUCK NET • 1980mm x 1400mm 5085691 / PA84068 $ 89 HARDIEPLANK WEATHERBOARD 4200 X 300 X 7.5MM • No-fuss, site-painted weatherboard available in a range of different profiles, from traditional to contemporary A. Smooth finish 5009852 / 400266 B. Woodgrain finish 5009854 / 403081 $ 35 TROPICAL ICE BOX 105L • 990mm x 490mm x 500mm • Tough roto moulded food grade U.V. stablised polyethelene 5033203 / T.105 $ 119 GEARWRENCH 12 PCE METRIC OPEN END RATCHETING WRENCH SET • 72 teeth ratcheting box end needs as little as 5° to move fasteners • 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm 5074691 / 85597 $ 299 A. $ 19 95 B. $ 21 95 Take advantage of the $20,000 small business tax rebate and upgrade your tools and equipment now! EVERHARD NUGLEAM 1 ¾ 1080 KITCHEN SINK • 304 stainless steel, 22L and 14L bowl with drainage tray • Chrome basket waste • Suits garbage disposer • 25 year manufacturers warranty Left hand configuration 5070994 / 73105 Right hand configuration 5070993 / 73104 $ 109 BELLINI FULL CHINA CONNECTOR SUITE • Bottom inlet • WELS 4 star rated, 4.5/3L flush • S/Trap only • Set out range adjustable: 145mm - 250mm 5023918 / G140W $ 99 ON SALE 5/6/15 – 30/6/15

description

 

Transcript of EOFY Clearance Catalogue

  • www.cairnshardware.com.au

    HOT DEVIL GAS POWERED TWIN TORCH KIT Stainless steel burner tube Lightweight and portable Auto ignition5093660 / HD8921BK

    GRIPWELL ADJUSTABLE TRUCK NET 1980mm x 1400mm5085691 / PA84068

    $89

    HARDIEPLANK WEATHERBOARD 4200 X 300 X 7.5MM No-fuss, site-painted weatherboard available in a range of different profiles, from traditional to contemporaryA. Smooth finish 5009852 / 400266B. Woodgrain finish 5009854 / 403081

    $35

    TROPICAL ICE BOX 105L 990mm x 490mm x 500mm Tough roto moulded food grade U.V. stablised polyethelene5033203 / T.105

    $119

    GEARWRENCH 12 PCE METRIC OPEN END RATCHETING WRENCH SET 72 teeth ratcheting box end needs as little as 5 to move fasteners 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm5074691 / 85597

    $299

    A. $1995 B. $2195

    Take advantage of the $20,000 small business tax rebate and upgrade your tools and equipment now!

    EVERHARD NUGLEAM 1 1080 KITCHEN SINK 304 stainless steel, 22L and 14L bowl with drainage tray Chrome basket waste Suits garbage disposer 25 year manufacturers warrantyLeft hand configuration 5070994 / 73105Right hand configuration 5070993 / 73104

    $109

    BELLINI FULL CHINA CONNECTOR SUITE Bottom inlet WELS 4 star rated, 4.5/3L flush S/Trap only Set out range adjustable: 145mm - 250mm5023918 / G140W

    $99ON SALE

    5/6/15 30/6/15

  • 2FENCING LOGS CCA treatedA. 3000 x 100 LOG10030B. 3600 x 100 LOG10036

    BONDALL SILASEC Concentrated liquid waterproofing compound Ideal for waterproofing cement paint, an additive for renders and toppings, or a quick setting putty for sealing against waterA. 1L 5024871 / 70405B. 2L jerry can 5024854 / 70406

    CAROMA SARACOM BASIN MIXER WELS 5 star rated, 6L/min Paddle style handles Chrome finish5074203 / 98020C5A

    $99

    BREMICK DECKING SCREWS Square drive 10mm x 50mm (1000/box)5091312 / STMC5100502

    MAKO OIL ANTI CORROSION LUBRICANT 750ML Perfect for home or home workshop5089173 / MAKO0750

    DURASEAL BRUSHABLE WATERPROOFER 20L Solvent based bitumen, reinforced with tough inert fibres, which cures to provide a non-trafficable, semi-flexible and waterproofing membrane5006797 / 1601220

    $89/box $1660 $99

    HITACHI 14.4V & 18V SLIDE WORKLIGHT Massive 36 bright white LEDs Run time: 5hrs on Power mode, 11.5hrs on Save mode Lightweight and durable5084893 / UB18DGL

    HITACHI 18V SLIDE COMBO PACK Includes brushless impact driver drill (DV18DBL), brushless impact wrench (WR18DBDL), 2 x 5.0Ah batteries, charger and case5088199 / KC18DOL(HJ)

    HITACHI 18V SLIDE AUTOMATIC SCREW DRIVER Ideal for the rapid driving of screws from 25mm-41mm in length for drywall to timber, drywall to steel, timber to timber or timber to steel applications5084422 / WF18DSL(H4)

    $88 $598 $299

    QUICK FRAME PANEL 2500MM X 1800MM Adjustable gate and panel frame system Flat-packed for convenience5089189 / QFP-2500-1800

    IRWIN HSS 25 PCE TITANIUM METRIC SET INDEX Titanium nitride coated bits Shorter cutting lips reduce torque when drilling5091145 / TTIN25ME3

    PLS 4 PLUMB DOT AND CROSS LINE LASER Horizontal and vertical layout laser with plumb up and down beams Plumb, level and square laser line tool5080564 / PLS-60574

    $69 $119 $488

    CLEARANCE STOCK MUST GO!

    A. $1495 A. $1595B. $1895 B. $2450

  • 3www.cairnshardware.com.au

    BAILEY PROFESSIONAL 150KG DUAL PURPOSE LADDERS Designed for heavy trade / commercial and tradesperson use Quicklatch - converts from a straight ladder back to a stepladder with the press of a buttonA. 6ft - 1.8m Ladder5010151 / FS13395B. 7ft - 2.1m Ladder5073756 / FS13396C. 8ft - 2.4m Ladder5073757 / FS13397

    BAILEY PROFESSIONAL 150KG EXTENSION LADDERS Designed for heavy trade / commercial and tradesperson use XHD strong, aluminium constructionA. 10ft - 3m Ladder 5073758 / FS13409B. 12ft - 3.6m Ladder 5073759 / FS13411

    BAILEY PROFESSIONAL 150KG DOUBLE-SIDED LADDERS Designed for heavy trade / commercial and tradesperson use Double sided for greater versatility and greater load bearing strengthA. 2ft - 0.6m Ladder5073748 / FS13384B. 3ft - 0.9m Ladder 5073749 / FS13385C. 4ft - 1.2m Ladder 5073750 / FS13386D. 6ft - 1.8m Ladder 5073751 / FS13388

    BAILEY PROFESSIONAL 150KG SINGLE SIDED 6FT 1.8M LADDER Designed for heavy trade / commercial and tradesperson use5010166 / FS13380

    BAILEY TRADE 150KG SINGLE SIDED 6FT 1.8M LADDER Designed for tradesperson or serious DIY5078616 / FS13426

    BAILEY EXTENDABLE STEPLADDER 135KG WITH TRAY Designed for tradesperson or serious DIY Converts into four different configurations5037762 / FS13206

    $129 $215

    SNAKES AND LADDERS.

    A. $199

    A. $95

    A. $235B. $229

    B. $105

    B. $279C. $259

    C. $135

    D. $179

    BAILEY TRADE 150KG DOUBLE-SIDED LADDERS Designed for tradesperson or serious DIY Double sided for greater versatility and greater load bearing strengthA. 3ft - 0.9m Ladder 5078618 / FS13428B. 4ft - 1.2m Ladder 5078619 / FS13429C. 6ft - 1.8m Ladder 5078620 / FS13430D. 8ft - 2.4m Ladder 5078621 / FS13431

    A. $69

    B. $99

    C. $145

    D. $209

    BAILEY STEPRIGHT 100KG STEP STOOLS Ideal for those small jobs in and around the home Strong, steel construction Ultra-thin profile for easy storageA. 2 Step - 0.56m 5057246 / FS12889B. 3 Step - 0.76m 5057247 / FS12887

    A. $3190

    B. $4995

    BAILEY P150 ALUMINIUM PLATFORM STEPLADDERS Lightweight and highly portable 150kg load rating, suitable for use on industrial work sites Extra strong, heavy duty aluminium construction for superior durabilityA. 3 Step 5094098 / FS13580B. 4 Step 5094099 / FS13581

    B. $235

    Simply purchase any Bailey ladder during June 2015, and receive a free 1.3kg bag of Allens Snakes Alive lollies!

    A. $215

    $145

  • 4CAROMA STYLUS PRIMA CERAMIC 4 STAR TOILET SUITE Quality ceramic finish Soft close seat Easy to clean, dual flush5088163 / PRI400SC

    KARST SINK 1.75 BOWL 1TH INSET Dimensions: 855mm x 480mm Includes rolla matt, board and tray 50 years warranty5082961 / KTX620

    NERO CLASSIC SINK MIXER WITH SWIVEL WELS 4 star rated, 7.5L/min 40mm ceramic disc cartridge Solid brass construction for longevity Solid easy to grip modular handle Twin-stud mounting for secure basin installation5091575 / YSW1100-07

    CAROMA STYLUS BANKSIA 4 STAR WALL FACE TOILET SUITE Heavy duty soft close seat Easy clean wall faced design Available with bottom inlet or back entry water supply5078136 / K1000W

    NERO CLASSIC BASIN MIXER FIXED WELS 4 star rated, 7.5L/min 40mm ceramic disc cartridge Solid brass construction for longevity Solid easy to grip modular handle Twin-stud mounting for secure basin installation5091573 / YSW1100-01

    NERO CLASSIC SHOWER MIXER 40mm ceramic disc cartridge Solid brass construction for longevity Solid easy to grip modular handle Twin-stud mounting for secure basin installation5091576 / YSW1100-09

    CAROMA MONACO SINK 1200MM 1.75 BOWL 304 stainless steel Clean design with embossed drainer Ideal working space for familiesA. Left hand configuration 5028071 / 5111.1LB. Right hand configuration 5028072 / 5111.1R

    NERO CLASSIC BASIN MIXER SWIVEL WELS 4 star rated, 7.5L/min 40mm ceramic disc cartridge Solid brass construction for longevity Solid easy to grip modular handle Twin-stud mounting for secure basin installation5091574 / YSW1100-07SB

    NERO SQUARE VIBE BASIN MIXER WELS 4 star rated, 7.5L/min 35mm ceramic disc cartridge Solid brass construction for longevity Solid easy to grip modular handle5091577 / YSW3107-01

    $199

    $499

    $2995

    $369

    $2995

    $2995

    $349

    $2995

    $5995

    BATHROOM, KITCHEN AND LAUNDRY.Available in selected stores only.

    DONT RISK IT, USE

    A LICENSED TRADIE!

    BATHROOM AND KITCHEN SHOP 172 Lyons St, Cairns 4080 7000

  • 5www.cairnshardware.com.au

    ABEY PARK AVENUE STRAIGHT BATH SPOUT 2 PCE Chrome finish Spout projection of 210mm5087664 / 1BTS-S

    ABEY PARK AVENUE COMPLETE SHOWER / BATH MIXER Chrome finish Easy to use paddle handle5087667 / 1SH-EXT

    ABEY PARK AVENUE HIGH BASIN MIXER Chrome finish High profile WELS 6 star rated, 4.5L/min5087662 / 1B2

    ABEY PARK AVENUE WALL BASIN SET Chrome finish WELS 5 star rated, 5.0L/min5087665 / 1B-WS

    ABEY WALL TOP ASSEMBLIES Chrome finish5087668 / 1WTA

    ABEY PARK AVENUE 3 PCE BASIN SET Chrome finish WELS 4 star rated, 6.5L/min5087663 / 1BS

    $85

    $3695

    $189

    $149

    $55

    $179

    ABEY PARK AVENUE BASIN MIXER Chrome finish WELS 6 star rated, 4.5L/min5087661 / 1B1

    $145

    ABEY PARK AVENUE COMPLETE SHOWER / BATH DIVERTER MIXER Chrome finish Easy to use paddle handle5087666 / 1SHD-EXT

    $4995

    EVERHARD 45L LAUNDRY UNITS Stainless steel bowls 25 years manufacturers warrantyA. Astra model 565 x 518 x 870mm 5008317 / 71187B. Project model 600 x 500 x 872mm 5008386 / 71189C

    EVERHARD NUGLEAM TRIM 30L LAUNDRY UNIT Stainless steel bowl White polymer cabinet 397 x 570 x 870mm5069139 / 71174

    EVERHARD BENCHLINE LAUNDRY INSERT SINK Stainless steel bowl 45L, 2 tap hole5008324 / 71245

    $219$169ea $89

    DECINA BAMBINO BATHS Ideal for the smaller bathroom in mind Provide maximum internal bathing space whilst utilising a width of only 720mmA. 1510 x 720 x 410mm 5090303 / BA1510WB. 1650 x 720 x 410mm 5090304 / BA1650W

    CAROMA STIRLING PRESSED STEEL BATHS Quality steel bath with enamel finish

    A. 1525 x 770 x 330mm 5004645 / 857510WB. 1675 x 770 x 330mm 5004647 / 857511W

    A. $129 A. $229B. $139 B. $259

  • 6Community Chest WorkCairns Hardware is proud to be supporting Atherton Rotary Club with the Rocky Creek WWII Igloo restoration project. To date, we have donated more than $7,000 of roofing material and flashings. Once completed the igloo will be managed by Atherton Rotary for the benefit of the Tablelands community. As part of Cairns Hardware and Tableland Hardware community involvement we are proud to be associated with this project. The igloo was used as an entertainment venue and church services were conducted in it during WWII.The roof has straight sheets as well as curved sheets covering the main section. To date all the screws have been donated by Buildex.

    Now you can shop for all your door and window needs under one roof! Previously located in two buildings, Cairns Hardware is excited to announce the new Doors and Windows showroom located on the corner of Scott and Lyons Sts (previously the Window Shop). Come and say hi to Steve and the team!Did you know?The Doors and Windows shop specialise in all windows, doors and screen systems, made to size locally. All types of configured windows Fly screens, barrier screens Shower screens Crimsafe (including the Ultimate Range) Mirrors Wardrobe doors Cut to size glass Internal and external timber doors Steel door frames We are also certified to do fire door inspections and certificationRequest a free measure and quote today!Phone: 4052 8800 Email: [email protected]

    NEW! Doors and Windows now in one convenient location!

    Cairns Hardware Roofing Discontinued - Colour Clearance

    Bushland, Loft, Headland, Sandbank and Wilderness Roofing and fixing screws (zips, tek and timber)

    Various sizes and quantities

    ONCE THEYRE GONE, THEYRE GONE. NO REASONABLE OFFER REFUSED!

    Also available made to measure: gutter, metal fascia, flashings and some roofing material.

    Pre-cut roofing available (cancelled orders).

    Call 4051 3995 or visit the Roof Shop at 28 Lynch St during business hours to enquire about clearance product.

    FREE DELIVERY IN THE CAIRNS REGION

  • 7www.cairnshardware.com.au

    ZANDA MACE DOOR HANDLES Brushed nickel Adjustable backset (60-70mm)A. Passage set 5091684 / 11504BNB. Privacy set 5091685 / 11505BNC. Entrance set 5091687 / 11507BN

    ZANDA SCEPTRE DOOR HANDLES Brushed nickel Adjustable backset (60-70mm)A. Passage set 5091680 / 11500BNB. Privacy set 5091681 / 11501BNC. Entrance set 5091683 / 11503BN

    EMRO STAINLESS STEEL GRAB RAILS Designed for safety, security and convenience to aid independent living Satin finish Suitable for bathroom, toilet and shower useA. 250mm 5033102 / E910-25BSB. 300mm 5033104 / C915-32BSC. 450mm 5033107 / C920-32BSD. 600mm 5033111 / C922-32BSE. 900mm 5033113 / C925-32BSF. 1200mm 5072243 / C928-32BS

    ZANDA SQUARE SINGLE SLIMLINE DEADBOLT Brushed nickel Adjustable backset (60-70mm) 15 year guaranteeA. Single 5091696 / 11516BNB. Double 5091697 / 11517BN

    ZANDA ROUND SINGLE SLIMLINE DEADBOLT Brushed nickel Adjustable backset (60-70mm) 15 year guaranteeA. Single 5091698 / 11518BNB. Double 5091699 / 11519BN

    EMRO CUSHIONED DOOR STOP Includes screws Suitable to use with most door furnitureA. 63mm 5008196 / 454WHB. 75mm 5008198 / 453WHC. 100mm 5008192 / 453EWH

    EMRO CUSHIONED DOOR CATCH Simple ball and socket catch Vandal-resistant5008191 / 460WHPP

    A. $3490 A. $3660

    A. $3660

    A. 65 $250

    A. $3490

    A. $1895 D. $2995

    B. $3490 B. $41

    B. $41

    B. 65

    B. $3490

    B. $2395 E. $3695

    C. $3990

    C. $3990

    C. $2595 F. $3795

    C. $1

  • 8HITACHI 190MM CIRCULAR SAW Die-cast aluminium base for fine, accurate, smooth cuts 2 x high performance 40 tooth TCT blades5010385 / C7MFA(H6)

    HITACHI 355MM METAL CUT OFF SAW Powerful 2400W motor - heavy duty Includes 6 cutting wheels Workshop ready5088204 / CC14SF-6W

    $298

    HITACHI 125MM (5") ANGLE GRINDER Powerful 1200W motor - heavy duty Deadman paddle switch for added safety5010372 / G13SE2

    HITACHI HANDHELD PETROL CUTTER 355MM Purefire, high performance 2 stroke motor, soft start Powerful 75CC / 3.9W for the hardest jobs 1 year commercial warranty5093979 / CM75EBP(HA)

    $1,195

    ACCESSORIES (SOLD SEPARATELY)350MM DIAMOND BLADE5093981 / 773007

    WATER PRESSURE 10L TANK5093980 / 712630

    $124ea $139

    $98

    $1,089

    HITACHI 18V 82MM CORDLESS PLANER (SKIN ONLY) Heavy duty aluminium end bracket for increased strength Maximum cutting depth: 2mm Maximum rebating depth: 9mm5088192 / P18DSL(H4)

    HITACHI 28MM SDS PLUS ROTARY HAMMER 720W, 3 mode action, huge 28mm drilling capacity 50mm core capacity, variable speed5081969 / DH28PC(H1)

    $199 $399

    HITACHI 380MM LASER DRILL PRESS Patented X-Y laser guide for rapid, accurate drilling Variable speed (12 speed sections) 750W induction motor Cast iron table tilts 45 left or right 1 year warranty5010439 / B16RM

    HITACHI 305MM SLIDE COMPOUND MITRE SAW Zero clearance rail system Adjustable laser line for accurate, easy cutting BONUS heavy duty trolley stand5031461 / C12RSH(H1)

    $949

    NEW RELEASE!

    INCLUDES 6 WHEELS!

    NEW RELEASE!WHILE STOCKS LAST

    Valued at $349!

    BONUS HEAVY DUTY TROLLEY STAND!

    HITACHI 18V 6 PCE BRUSHED COMBO KITKit includes: 18V slide impact (hammer) driver drill (DV18DSDL(H4)), 18V slide impact driver (WH18DSDL(H4)), 18V 125mm cordless disc grinder (G18DSL(H5)), 18V slide reciprocating saw (CR18DSDL(H4)), 18V slide rotary hammer (DH18DSL(H4)), 18V slide worklight (UB18DGL(LO)), charger, site bag and 3 x 5.0Ah batteries5094101 / PLUMBERSPACK

    $549

    $245

  • 9www.cairnshardware.com.au

    HITACHI 18V 13 PCE COMBO KITKit includes: brushless impact (hammer) driver drill (DV18DBL), reciprocating saw (CR18DSL), circular saw (C18DSL), rotary hammer drill (DH18DSL), slide Li-ion brushless impact driver (WH18DBDL), impact wrench (WR18DSDL), 125mm angle grinder (G18DSL), jigsaw (CJ18DSL), blower (RB18DSL), wet & dry vacuum (R18DSL), lantern (UB18DSL), torch (UB18DAL), radio (UR18DSL), 4 x 5.0Ah Li-ion batteries (BSL1850), 2 x 14.4V - 18V cooling charger (UC18YRSL), 1 x premium site bag5094037 / SMPS18(HJ2)

    $2,149

    HITACHI 18V 3 PCE BRUSHLESS COMBO KITKit includes: brushless impact driver drill (DV18DBL), IP56 brushless impact driver (WH18DDL), 125mm brushless angle grinder (G18DBAL), 2 x 5.0Ah Li-ion batteries, charger and bag5094035 / KC18DDBL(HJ)

    HITACHI 18V SLIDE 3 PCE BRUSHLESS COMBO KITKit includes: brushless impact (hammer) driver drill (DV18DBL), brushless impact wrench (WR18DBDL), 125mm brushless angle grinder (G18DBAL), 2 x 5.0Ah Li-ion batteries, charger and bag5094036 / KC18DRBL(HJ)

    $799

    HITACHI 18V 2 PCE BRUSHLESS COMBO KITKit includes: 18V brushless impact driver drill (DV18DBEL(H4)), 18V brushless impact driver (WH18DBEL(H4)), cooling charger, 2 x 5.0Ah batteries and case5094100 / KC18DBEL(HJ)

    HITACHI 125MM (5") BRUSHLESS ANGLE GRINDER 18V, brushless technology for superior run time Deadman paddle switch for added safety5094034 / G18DBAL(H5)

    $257$488

    $799

    For conditions of warranty visit w

    ww.hitachi-pow

    ertools.com.au

    NEW RELEASE!

    NEW RELEASE!

    NEW RELEASE!

    NEW RELEASE!

    NEW RELEASE BRUSHLESS.

    NEW RELEASE KIT!

    BONUS 5.0Ah BATTERY!

  • 10

    $00.00 $00.00 $00.00

    ALUMINIUM ANGLED LID TOOL BOXES Gas strutsA. Small - 900 x 500 x 7005090285 / AT-301B. Medium - 1220 x 500 x 7005090286 / AT-302C. Large - 1450 x 500 x 7005090287 / AT-303

    ALUMINIUM TOOL BOXES Gas strutsA. Small - 780 x 360 x 3105090292 / AT-902B. Medium - 1120 x 390 x 4105090293 / AT-904

    ALUMINIUM LOW PROFILE TOOL BOXES Gas strutsA. Small - 950 x 600 x 5005090288 / AT-401B. Medium - 1250 x 600 x 5005090289 / AT-402C. Large - 1550 x 600 x 5005090290 / AT-403

    $99ea

    UNDER TRAY UTE BOXES Aluminium checker plate 750 x 250 x 400RIGHT 5090283 / AT-1101(B)LEFT 5090282 / AT-1101(A)

    2 FOR $179 KIT092

    A. $349 A. $105 A. $268B. $409 B. $198 B. $339C. $488 C. $389

    PASLODE NAILSA. Nail coil 32mm x 2.5mm screw hardened 5090557 / B25110B. Nail plain 75mm x 3.06mm impulse 5016746 / B20547V

    PASLODE FRAMING GUN LI-ION FRAMEMASTER Drives Paslode Impulse D-Head, DekFast and CladFast Nails Cycle rate: 1000/hr (2-3/sec) Mag capacity: 52 nails (approx.)5077552 / B20543

    PASLODE FINISHING ANGLE GUN LI-ION TRIMASTER Drives TrimMaster angled brads Cycle rate: 500/hr (2-3/sec) Mag capacity: 100 brads5081859 / B20721

    AIRCO COLT 10AMP DIRECT DRIVE AIR COMPRESSOR 2.5HP, 1.8KW Up to 145psi 2850 RPM5015130 / COLT282

    AIRCO AIR HOSE 10MM X 30M Premium quality bulk air hose Complete with CEJN type fittings5094102 / WHITEHOSE30

    STANLEY BOSTITCH INDUSTRIAL N66 COIL NAILER Drives wire weld and plastic inserted coil nails Lightweight aluminium design for added durability 7 year limited warranty5023204 / N66C-1

    $469 $3995

    $695

    $289

    $695A. $4395 B. $6395

    TOOLS. GET IT SORTED.

  • 11www.cairnshardware.com.au

    CRESCENT 25 PCE SCREWDRIVER CASED SET New tri lobe design handle provides increased leverage Magnetised and hardened tips5083270 / CSD25

    CRESCENT LINESMANS 8" PLIER Built-in crimper for use on 1.5 - 6mm2 solderless connectors Extended and hardened cutting jaw for use with flat, multi-core cabling Slimline jaw with precise jaw gap5005712 / 3800CTV

    LUFKIN BIG BOSS TAPE 8M X 30MM Extra wide blade for increased stiffness and rigidity Heavy duty belt clip Hi-vis orange case5032049 / LBB830

    PLUMB CLAW HAMMER Solid steel construction Contoured handle for comfort and control5005786 / SS20C

    LUFKIN MULTI LINE LASER LEVEL AND TRIPOD Cross lines and plumb lines Indoor and outdoor use Auto levelling5080176 / LCL4SET

    LUFKIN LASER MEASURER 40M Suitable for internal and external measuring Accurate to 1.5mm over 40m Range: 0.05m - 40m Continuous measurement 1 year warranty5080175 / LLM45

    $2595

    $3695

    $1995

    $2995ea

    CRESCENT 18" INDEXING FLAT PRYBAR Head indexes over 180 and locks in 16 positions Narrow jab end for extreme prying and leverage5090176 / DB18X

    $2995

    $235

    $4195

    $139

    A. $3395 B. $3495

    CRESCENT TAPE MEASURE 8M X 25MM PRO-GRIP Durable case design and construction Pro-grip rubber co-moulded case5071878 / CP8SI

    $795

    CRESCENT 148 PCE TOOL KIT 1/4", 3/8", 1/2" quick-release ratcheting drives Wide selection of standard and deep sockets in the most common SAE and metric sizes8016738 / CTK148MP

    NICHOLSON FILE SET 200MM 3 PCE High grade steel files Precision cut teeth Includes storage case5070636 / NFS38

    $2795

    $3995

    $119

    CRESCENT 45 PCE SOCKET SET 1/4" DRIVE 1/4" quick release ratcheting drive, 72-tooth with cushion grip 30 sockets with accessories 8 piece hex key5090174 / CTK45NEU

    CRESCENT END CUTTING NIPPERS WITH CUSHION GRIP Solid joint pliers made from drop-forged alloy steel A. 8" size 5005717 / 72-8CVB. 9" size 5005718 / 72-9CV

    CRESCENT LOCKING PLIER SET 3 PCE 5", 7", 10" curved jaw, locking pliers8016733 / CLP3SET

  • 12

    LIMITED EDITION! MAKITA 18V 2 PCE BRUSHLESS COMBO KITKit includes: brushless hammer driver drill, brushless impact driver, 2 x 5.0Ah batteries, charger and case, 100th Anniversary Limited Edition, metallic casing5093700 / DLX2055TSP

    KITS - MEGA VALUE!

    MAKITA 18V 2 PCE CORDLESS COMBO KITKit includes: hammer driver drill, impact driver, 2 x 3.0Ah batteries, charger and case5091259 / DLX2012X

    MAKITA 18V 2 PCE 3.0AH COMBO KITKit includes: hammer driver drill, impact driver, 3 x 3.0Ah batteries, charger and case5091260 / DLX2005X1

    MAKITA 18V MOBILE BRUSHLESS ROTARY HAMMER Brushless DC motor helps to reduce energy loss by 30% One touch sliding SDS plus type chuck 3 mode operation - rotation + hammering, hammering only, rotation only Concrete capacity: 24mm Steel capacity: 13mm Wood capacity: 27mm5078633 / DHR242Z

    MAKITA 18V MOBILE MULTI-TOOL Compatible with all Bosch OIS (Oscillating Interface System) accessories 12 angle settings for accessories at every 30 from 0 to 360 High operating efficiency Variable speed control, anti-restart function5078634 / DTM50ZX5

    MAKITA 18V MOBILE 125MM RANDOM ORBITAL SANDER Compact design with a short height and a lower centre of gravity for easier handling and more manoeuvrability High orbital speed and a 2.8mm orbit diameter High dust extraction rate: dust is extracted through an 8 hole under pad and collected into the dust box5082206 / DBO180Z

    $334

    $389

    $529

    $639

    $229 $179

  • 13www.cairnshardware.com.au

    CUTTING

    MAKITA 18V MOBILE CIRCULAR SAW 165MM Aluminium diecast base plate Bevel cuts up to 45 Easy to operate large lock-off lever Compatible with 1.5, 3, 4 and 5.0Ah batteries5091253 / DSS611Z

    MAKITA CUTTING DISCS (PACK OF 12)A. 100 x 1 x 16mm 5090108 / D-20513-12

    B. 115 x 1.2 x 22.23mm 5090109 / D-20529-12

    C. 125 x 1.2 x 22.23mm 5090101 / D-20535-12

    MAKITA RECIPRO BLADE COMBINATION 6 PCE SET WITH TUBE5094104 / B-44448

    MAKITA JIGSAW BLADE COMBINATION 10 PCE SET WITH CASE5094105 / B-44426

    MAKITA 18V MOBILE RECIPRO SAW Cutting capacity - pipe diameter: 50mm Cutting capacity - wood: 50mm Two switch levers available with various speed control LED job light Toolless blade clamp Low vibration at only 7.0m/s25088385 / DJR183Z

    MAKITA 18V MOBILE VACUUM CLEANER New T-shaped nozzle for enhanced manoeuvrability Air volume: 1.4m2/sec Dust collecting capacity: 650ml Max air suction: 3.4kPa5046495 / DCL180Z

    MAKITA 18V MOBILE BLOWER 3 air volume settings (high/medium/low) Approx. continuous operation time on a single full battery charge - High: 12mins, Medium: 25mins, Low: 85mins Air pressure: 5.4kPa Air volume: 0.038m3/sec5041377 / DUB182Z

    MAKITA 2 X 18V LI-ION CORDLESS TURBO BLOWER Powered by 2 x 18V Li-ion batteries Continuous run time using same full batteries: 35-150mins 3 speed adjustable nozzle Max air volume: 13.4m3/min Max air speed: 139km/h5094087 / DUB362Z

    MAKITA ULTRA MAG IMPACT GOLD TORSION BIT HOLDER 71MM Unique design which focuses the force exerted on a regular screw bit away from the tip, meaning less chance of breakage Can last up to 10x longer than a regular screw bit5093001 / B-28531

    MAKITA 37 PCE SCREWDRIVER BIT SET5094103 / B-29119

    CELEBRATE 100TH ANNIVERSARY.

    A.$990 B.$1195 C.$1295

    $59 $77

    $199 $189

    $2995 $2750

    $359

    $895 $1995

  • 14

    ABSCO ECONOMY SHEDS Ultimate storage unit for those areas where space is limited SNAPTITE assembly Pre-punched holes and safety edges Made from superior strength steel 10 year warranty

    SINGLE DOOR SHEDS (MERINO COLOUR)A. Skillion roof 1.52mW x 0.78mD x 1.95mH 5094106 / PB15081SECOKB. Gable roof 2.26mW x 1.52mD x 1.95mH 5094107 / PBJ23151GECOK

    DOUBLE DOOR SHEDS (MERINO COLOUR)C. Skillion roof 3.00mW x 0.78mD x 1.95mH 5094108 / PBJ30082SECOKD. Gable roof 3.00mW x 3.00mD x 2.06mH 5094109 / PBJ30302GECOK

    A. $219 B.$349

    D. $549C. $349

    OUTDOOR. CONSIDER IT DONE!

    CYCLONE HEXAGONAL FENCING BARS Suitable for fencing contractors and farmers Chisel point is ideal for digging and the upset head is great for ramming or packing soil when setting posts Lifetime guarantee

    A. 1830mm x 25mm 5031975 / 604225B. 1800mm x 30mm 5006609 / 604256

    CYCLONE POST HOLE SHOVEL General purpose Long handle for extra leverage Lifetime guarantee5006674 / 640001

    CYCLONE POST HOLE DIGGER PINCER Ideal for digging post and inground support holes and holes for planting trees Mild steel handles Lifetime guarantee5006708 / A482110

    CYCLONE EXTRA WIDE RAKE Huge plastic rake for litter, leaves, sand and lawn clippings Long aluminium handle Lifetime guarantee5006666 / 636974

    CYCLONE MATTOCK WITH CUTTER END General purpose Short timber handle Lifetime guarantee5054047 / 634475

    $3895 $7495 $1895 $3995

    A. $4995 B.$5995

  • 15www.cairnshardware.com.au

    CABOTS AQUADECK 6L Ideal for decks, garden furniture, pergolas, fences and gates Highly durable, low odour decking oil Water based

    A. Natural 5094110 / 567.82170-6LB. Merbau 5094111 / 567.82173-6L

    INTERGRAIN ULTRADECK 10L Extremely long lasting, water-based oil for decking and exterior timberA. Natural 5015720 / 552.94930-10LB. Merbau 5046827 / 552.W0000-10LB. Jarrah 5046824 / 552.W0001-10L

    CABOTS DECK CLEAN Cleaner that prepares exterior timber and decks for coating5045588 / 91882195-4L

    INTERGRAIN POWERPREP 4L Powerful, high strength liquid remover Removes old or weathered existing timber finishes and prepares timber for coating5087112 / 552.W0103-4L

    CABOTS DECK HAND BUCKET 10L Multi-use bucket specifically created to accommodate decking cleaners, oils and stains5087753 / N9578273-UNIT

    INTERGRAIN REVIVA 4L Oxalic acid and citrus acid for best cleaning results Use to clean all timber prior to coating5015699 / 552.94814-4L

    $7495

    $179

    $3495

    $4495

    $1995

    $4795

    GALVANISED FARM GATESA. 2400mm x 1160mm 5092809 / MG-240116

    B. 3000mm x 1160mm 5092810 / MG-300116

    GALVANISED PANEL MESH 1800 x 120075 x 50mm 4mm wire 5092812 / HP-4001100 x 100mm 5mm wire 5092813 / HP-181050 x 50mm 3.15mm wire 5092814 / HP-185025 x 25mm 2.5mm wire 5092815 / HP-1825

    STAR PICKETSA. 450mm long 5026483 / UPB-45B. 600mm long 5026484 / UPB-60

    A. $6490

    $2995/panel A. $175 ea

    B. $7995

    B. $250 ea

    HINGE KITS AVAILABLE!

  • 1616

    YAMAHA 2.4KVA 6L PETROL INVERTER GENERATOR 4 stroke petrol engine 12hp, 2400W Brushless alternator Little extra grunt, but quiet as ever5091637 / EF2400IS

    YAMAHA 2.8KVA 11L PETROL INVERTER GENERATOR 4 stroke petrol engine 12hp, 2800W Brushless alternator Power anything from power tools to sophisticated electronics5091638 / EF2800I

    YAMAHA 5.5KVA 28L PETROL GENERATOR 4 stroke petrol engine 12hp, 2 x 15 amp outlets 11 hours run time (1/4 load) Ideal for the tradie / industrial use5093871 / EF5500FW

    YAMAHA 6KVA 28L PETROL INVERTER GENERATOR 4 stroke petrol engine 12hp, 6000W 11 hours run time (1/4 load) Capable of running homes in emergency situations including fridges and air cons5091642 / EF7200E

    $1,899

    $1,698 $1,349 $1,659$1,698

    YAMAHA 2KVA 4.4L PETROL INVERTER GENERATORThe EF2000iS Inverter Generator is powerful, portable and super sleek with lots of great features. This best seller is great for recreational activities such as camping, fishing and boating. Its the perfect companion for the motorhome, caravan or RV. 4 stroke petrol engine 12hp, 2000W Compact and lightweight (20kg)A. Camo model 5093889 / EF2000ISCB. Blue model 5091636 / EF2000IS

    A. $1,698 B. $1,499

    RINNAI INVERTER SPLIT SYSTEM AIR CONDITIONERS Ultimate storage unit for those areas where space is limited Easy to use remote control Delay timer to turn the appliance on or off within a specific time period Intuitive end of season cleaning function Low operating noise levels 5 year limited warranty

    A. 2.5kW Reverse Cycle: Ideal size for the bedroom5094112 / RINV25RBB. 3.5kW Reverse Cycle: Ideal size for mid-sized rooms5094113 / RINV35RBC. 5.2kW Reverse Cycle: Ideal size to heat or cool family rooms and living areas5094114 / RINV52RBD. 7.0kW Reverse Cycle: Ultimate solution to heat or cool large, open plan living areas5094115 / RIN70RB

    A. $634 B.$738

    D. $1,245

    C. $945

    For over 40 years, Rinnai have been providing Australian homes with a quality, premium range of products that offer solutions to comfortable living. Rinnai have developed a brand new range of Inverter Split System Air Conditioners. The new range combines design, quality and efficiency to create a product that offers reliability, elegance, convenience and performance.

  • 17www.cairnshardware.com.auwww.cairnshardware.com.au 17

    $699 $1,199 $1,599 $1,698

    Landcruiser Saharas!WIN 1 of 4

    ENGEL FRIDGE-FREEZER 38L ECLIPSE12/24/240VKIT086

    ENGEL FRIDGE-FREEZER 40L12/24/240VKIT087

    ENGEL FRIDGE-FREEZER 80L12/24/240VKIT089

    ENGEL FRIDGE-FREEZER 60L12/24/240VKIT088

    BONUS TRANSIT BAG Valued at $135!

    BONUS TRANSIT BAG Valued at $195!

    BONUS TRANSIT BAG Valued at $238!

    BONUS TRANSIT BAG Valued at $245!

    TOTAL PRIZE POOL

    WORTH OVER $500K!

    Get in on Engels biggest prize giveaway in history!

    - Ernie Dingo

    ENGEL ARE GIVING AWAY FOUR LANDCRUISER SAHARAS THIS WINTER, THATS ONE EACH MONTH!PURCHASE ANY ENGEL FRIDGE-FREEZER IN THE MT PLATINUM RANGE INCLUDING LEGACY SERIES FROM MAY-AUGUST AND REGISTER ON THE WEBSITE TO GO IN THE DRAW!Terms and conditions apply, see Engel website for details. Proof of purchase required. Open to entrants over 18 years. Permit numbers: VIC 15/692 SA T15/484 NSW LTPS/15/02237 ACT TP 15/05304.

    PLUS!8 LEGACY EDITION ENGEL FRIDGE-FREEZERS TO BE WON!

  • 18

    2 BURNER COMPACT BBQ WITH HOOD 980mm x 900mm x 510mm Cast iron hotplate Single skin stainless steel roasting hood Powder coated steel side shelves5093746 / 8220333

    OUTDOOR LIVING. CONSIDER IT DONE!

    AMBER BUGG 2 BURNER BBQ WITH STAND Super compact - grill / griddle plates Heavy duty wheels 5 year limited warranty5093745 / 8220304

    4 BURNER BBQ SOLID PLATE WITH TROLLEY Solid steel hotplate Powder coated steel side shelves and flat top lid5093748 / 695934

    4 BURNER BBQ WITH HOOD AND SIDE BURNER 1210mm x 1376mm x 585mm Cast iron hotplate Twin skin stainless steel roasting hood Powder coated steel side shelves5093750 / 695939

    4 BURNER BBQ Hood and solid steel bottom shelf5093747 / 8210231

    6 BURNER BBQ SOLID PLATE WITH TROLLEY 924mm x 1640mm x 573mm Solid steel hotplate Powder coated steel side shelves and flat top lid5093749 / 8210196

    CHARMATE CHARCOAL SPIT ROASTER 240V 10KG 620mm x 950mm x 360mm 240V, chrome wire grill 10kg weight rated rotisserie5089226 / 8210187

    $399

    $179

    $219

    $299 $149

    $99

    $107ea

  • 19www.cairnshardware.com.au

    CAFE 3 PCE WICKER OUTDOOR SETTING 5mm tempered glass table top Chair size: 730mm x 530mm x 650mm5085817 / 8127293

    3 PCE STEEL OUTDOOR SETTING - STIRLING Table size: 670mm x 610mm x 610mm Chair size: 895mm x 460mm x 560mm Powdercoated steel frameA. Orange 5093753 / 8110437B. Yellow 5093756 / 9110260

    7 PCE ALUMINIUM WICKER OUTDOOR SETTING - DAINTREE 5mm tempered black glass table top Powdercoated aluminium frame Wicker black brush Grey chairpad cushions included Table size: 700mm x 160mm x 900mm5093758 / 696449

    TIMBER STORAGE BOX - KALBARRI 620mm x 128mm x 480mm Keep your outdoor accessories dry with this timber storage box5093760 / 677839

    7 PCE TIMBER OUTDOOR SETTING - SLIMLINE KALBARRI Natural brown, 100% eucalyptus Table size: 750mm x 900mm x 150mm Charcoal colour chairpads5089097 / 8117373

    ALUMINIUM WICKER STORAGE BOX - DAINTREE Wicker black brush5093757 / 8110432

    9 PCE ALUMINIUM WICKER OUTDOOR SETTING - DAINTREE 5mm tempered black glass table top Powdercoated aluminium frame Wicker black brush Grey chairpad cushions included Table size: 700mm x 200mm x 1000mm5093759 / 8110373

    $399

    $149

    $4995 $99ea

    $149 $499

    $399

  • WINSee www.chwinaute.com.au for full terms, to register and entry details. Open to businesses in the building industry operating in QLD and QLD residents aged 18+. Register online to participate from 23/3/15 to 11:59pm local time 30/6/15. *Purchase between 1/4/15 and 30/6/15. Final entries close 6/7/15. Retain invoices for all entries. Limit 1 registration per business/individual. Instant win Prizes: 120x $50 Caltex Fuel Card. Draw: 11am AEST on 15/7/15 at U6/106 Old Pittwater Rd, Brookvale NSW. Odds of winning Major Prize (once drawn as a participant) is 1:10. 2015 James Hardie Australia Pty Ltd ABN 12 084 635 558. and denote a trademark owned by James Hardie Technology Limited.

    a Hardie UTEReceive 1 entry with every $500 you spend on James Hardie products & 2 entries when you spend $500 on Scyon products to go into the draw for a chance to play for a Toyota HILUX!*

    PLUS $50 Caltex Fuel CardsCould be won instantly when you spend $1,500 on James Hardie/Scyon products in a single calendar month

    PROUDLY PARTNERED WITH CAIRNS HARDWARE TO BRING YOU THE BEST

    IF ITS SELLEYS IT WORKS

    Every effort is made to ensure that the advertised items are available, but due to factors beyond our control, some items may not be available at the commencement of the sale. Should this occur, a raincheck can be offered for most products and we will make every effort to supply this item or we will offer to sell you a comparable item at the same price. Unless otherwise stated, accessories are not included in the price. We cant offer rainchecks on limited stock items. Savings stated are off regular prices. Due to the printing process, colours in this catalogue may differ to actual colours of the items. Stock may not be displayed in all stores but is available to order. We reserve the right to correct printing errors. Printed on behalf of Cairns Hardware Company Pty. Ltd. ABN 87 009 881 341. All prices include GST. Cairns Hardware reserves the right to extend any offers. On sale Friday 5th June to Tuesday 30th June 2015, while stocks last. Store hours may vary in regional areas. Some prices may vary in regional areas due to increased freight charges.

    Scott St, Cairns 4040 2200 Supply Rd, Edmonton 4045 5700 Salvado Dr, Smithfield 4038 5300

    Howard St, Cooktown Charlotte St, Cooktown

    4043 0400

    Ernest St, Innisfail 4078 0600

    Mill St, Mossman 4084 1800

    James St, Mareeba 4092 3674Grove St, Atherton 4089 2800