BUK9640-100A - assets.nexperia.com · BUK9640-100A mc,)cMoNµk2k≤=Q1ksiiMoLvauMcucMlcn Nexperia...

BUK9640-100AN-channel TrenchMOS logic level FET13 March 2014 Product data sheet

1. General descriptionLogic level N-channel enhancement mode Field-Effect Transistor (FET) in a plasticpackage using TrenchMOS technology. This product has been designed and qualified tothe appropriate AEC standard for use in automotive critical applications.

2. Features and benefits• Low conduction losses due to low on-state resistance• Q101 compliant• Suitable for logic level gate drive sources• Suitable for thermally demanding environments due to 175 °C rating

3. Applications• 12 V, 24 V and 42 V loads• Automotive and general purpose power switching• Motors, lamps and solenoids

4. Quick reference dataTable 1. Quick reference dataSymbol Parameter Conditions Min Typ Max Unit

VDS drain-source voltage Tj ≥ 25 °C; Tj ≤ 175 °C - - 100 V

ID drain current VGS = 5 V; Tmb = 25 °C; Fig. 2; Fig. 3 - - 39 A

Ptot total power dissipation Tmb = 25 °C; Fig. 1 - - 158 W

Static characteristics

VGS = 4.5 V; ID = 25 A; Tj = 25 °C - - 43 mΩ

VGS = 10 V; ID = 25 A; Tj = 25 °C - 29 39 mΩ

RDSon drain-source on-stateresistance

VGS = 5 V; ID = 25 A; Tj = 25 °C;Fig. 11; Fig. 12

- 34 40 mΩ

Dynamic characteristics

QGD gate-drain charge VGS = 5 V; ID = 25 A; VDS = 80 V;Tj = 25 °C; Fig. 13

- 20 - nC

© Nexperia B.V. 2017. All rights reserved

Nexperia BUK9640-100AN-channel TrenchMOS logic level FET

BUK9640-100A All information provided in this document is subject to legal disclaimers.

Product data sheet 13 March 2014 2 / 13

Symbol Parameter Conditions Min Typ Max Unit

Avalanche ruggedness

EDS(AL)S non-repetitive drain-source avalancheenergy

ID = 39 A; Vsup ≤ 100 V; RGS = 50 Ω;VGS = 5 V; Tj(init) = 25 °C; unclamped

- - 182 mJ

5. Pinning informationTable 2. Pinning informationPin Symbol Description Simplified outline Graphic symbol

1 G gate

2 D drain[1]

3 S source

mb D mounting base; connected todrain

mb

1 3

2

D2PAK (SOT404)

S

D

G

mbb076

[1] It is not possible to make a connection to pin 2.

6. Ordering informationTable 3. Ordering information

PackageType number

Name Description Version

BUK9640-100A D2PAK plastic single-ended surface-mounted package (D2PAK); 3 leads(one lead cropped)

SOT404

7. MarkingTable 4. Marking codesType number Marking code

BUK9640-100A BUK9640-100A

8. Limiting valuesTable 5. Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).Symbol Parameter Conditions Min Max Unit

VDS drain-source voltage Tj ≥ 25 °C; Tj ≤ 175 °C - 100 V

VDGR drain-gate voltage RGS = 20 kΩ - 100 V

VGS gate-source voltage -15 15 V





Symbol Parameter Conditions Min Max Unit

Ptot total power dissipation Tmb = 25 °C; Fig. 1 - 158 W

Tmb = 25 °C; VGS = 5 V; Fig. 2; Fig. 3 - 39 AID drain current

Tmb = 100 °C; VGS = 5 V; Fig. 2 - 28 A

IDM peak drain current Tmb = 25 °C; pulsed; tp ≤ 10 µs; Fig. 3 - 159 A

Tstg storage temperature -55 175 °C

Tj junction temperature -55 175 °C

Source-drain diode

IS source current Tmb = 25 °C - 39 A

ISM peak source current pulsed; tp ≤ 10 µs; Tmb = 25 °C - 159 A

Avalanche ruggedness

EDS(AL)S non-repetitive drain-sourceavalanche energy

ID = 39 A; Vsup ≤ 100 V; RGS = 50 Ω;VGS = 5 V; Tj(init) = 25 °C; unclamped

- 182 mJ

Tmb (°C)0 20015050 100

03na19

40

80

120

Pder(%)

0

Fig. 1. Normalized total power dissipation as afunction of mounting base temperature

03nh74

0

10

20

30

40

25 50 75 100 125 150 175 200Tmb (°C)

ID(A)

Fig. 2. Normalized continuous drain current as afunction of mounting base temperature





03nh72

1

10

102

103

1 10 102 103VDS (V)

ID(A)

DC

100 ms10 ms

RDSon = VDS / ID

1 ms

tp = 10 µs

100 µs

Fig. 3. Safe operating area; continuous and peak drain currents as a function of drain-source voltage

9. Thermal characteristicsTable 6. Thermal characteristicsSymbol Parameter Conditions Min Typ Max Unit

Rth(j-mb) thermal resistancefrom junction tomounting base

Fig. 4 - - 0.95 K/W

Rth(j-a) thermal resistancefrom junction toambient

mounted on a printed-circuit board;minimum footprint

- 50 - K/W

03nh73

Single Shot

0.2

0.1

0.05

0.02

10- 3

10- 2

10- 1

1

10- 6 10- 5 10- 4 10- 3 10- 2 10- 1 1tp (s)

Zth(j-mb)(K/W)

δ = 0.5

tp

tp

T

P

t

Tδ =

Fig. 4. Transient thermal impedance from junction to mounting base as a function of pulse duration





10. CharacteristicsTable 7. CharacteristicsSymbol Parameter Conditions Min Typ Max Unit

Static characteristics

ID = 0.25 mA; VGS = 0 V; Tj = 25 °C 100 - - VV(BR)DSS drain-sourcebreakdown voltage ID = 0.25 mA; VGS = 0 V; Tj = -55 °C 89 - - V

ID = 1 mA; VDS = VGS; Tj = 25 °C;Fig. 10

1 1.5 2 V

ID = 1 mA; VDS = VGS; Tj = 175 °C;Fig. 10

0.5 - - V

VGS(th) gate-source thresholdvoltage

ID = 1 mA; VDS = VGS; Tj = -55 °C;Fig. 10

- - 2.3 V

VDS = 100 V; VGS = 0 V; Tj = 175 °C - - 500 µAIDSS drain leakage current

VDS = 100 V; VGS = 0 V; Tj = 25 °C - 0.05 10 µA

VGS = 10 V; VDS = 0 V; Tj = 25 °C - 2 100 nAIGSS gate leakage current

VGS = -10 V; VDS = 0 V; Tj = 25 °C - 2 100 nA

VGS = 4.5 V; ID = 25 A; Tj = 25 °C - - 43 mΩ


- - 100 mΩ

VGS = 10 V; ID = 25 A; Tj = 25 °C - 29 39 mΩ

RDSon drain-source on-stateresistance


- 34 40 mΩ

Dynamic characteristics

QG(tot) total gate charge - 48 - nC

QGS gate-source charge - 5.4 - nC

QGD gate-drain charge

ID = 25 A; VDS = 80 V; VGS = 5 V;Tj = 25 °C; Fig. 13

- 20 - nC

Ciss input capacitance - 2304 3072 pF

Coss output capacitance - 222 266 pF

Crss reverse transfercapacitance

VGS = 0 V; VDS = 25 V; f = 1 MHz;Tj = 25 °C; Fig. 14

- 151 207 pF

td(on) turn-on delay time - 20 - ns

tr rise time - 135 - ns

td(off) turn-off delay time - 125 - ns

tf fall time

VDS = 30 V; RL = 1.2 Ω; VGS = 5 V;RG(ext) = 10 Ω; Tj = 25 °C

- 90 - ns

LD internal draininductance

from upper edge of drain mountingbase to centre of die; Tj = 25 °C

- 2.5 - nH





Symbol Parameter Conditions Min Typ Max Unit

from drain lead 6 mm from package tocentre of die; Tj = 25 °C

- 4.5 - nH

LS internal sourceinductance

from source lead to source bond pad;Tj = 25 °C

- 7.5 - nH

Source-drain diode

VSD source-drain voltage IS = 25 A; VGS = 0 V; Tj = 25 °C; Fig. 15 - 0.85 1.2 V

trr reverse recovery time - 60 - ns

Qr recovered charge

IS = 37 A; dIS/dt = -100 A/µs;VGS = -10 V; VDS = 30 V; Tj = 25 °C - 240 - nC

03na66

0

20

40

60

80

100

120

0 2 4 6 8 10VDS (V)

ID(A)

2.4

3.0

4.05.0 VGS = 10 (V)

Fig. 5. Output characteristics: drain current as afunction of drain-source voltage; typical values

03na64

24

26

28

30

32

34

0 5 10 15VGS (V)

RDSon(mΩ)

Fig. 6. Drain-source on-state resistance as a functionof gate-source voltage; typical values





03aa36

10-6

10-5

10-4

10-3

10-2

10-1

0 1 2 3VGS (V)

ID(A)

maxtypmin

Tj = 25 °C; VDS = 5 V

Fig. 7. Sub-threshold drain current as a function ofgate-source voltage

03na65

0

20

40

60

80

0 10 20 30 40ID (A)

gfs(S)

Fig. 8. Forward transconductance as a function ofdrain current; typical values

03na61

0

20

40

60

80

0 1 2 3 4VGS (V)

ID(A)

Tj = 175 °C Tj = 25 °C

Fig. 9. Transfer characteristics: drain current as afunction of gate-source voltage; typical values

03aa33

0

0.5

1

1.5

2

2.5

-60 0 60 120 180Tj (°C)

VGS(th)

(V)

max

typ

min

Fig. 10. Gate-source threshold voltage as a function ofjunction temperature





03na67

20

25

30

35

40

45

50

10 20 30 40 50 60 70ID (A)

RDSon(mΩ)

VGS = 3.0 (V)

3.2

3.64.05.010

3.4

Fig. 11. Drain-source on-state resistance as a functionof drain current; typical values

aaa-011480

-60 0 60 120 1800

0.5

1

1.5

2

2.5

3

Tj (°C)

aa

Fig. 12. Normalized drain-source on-state resistancefactor as a function of junction temperature

03na63

0

1

2

3

4

5

0 20 40 60QG (nC)

VGS(V)

VDD = 14 (V) VDD = 80 (V)

Fig. 13. Gate-source voltage as a function of gatecharge; typical values

03na68

0

1000

2000

3000

4000

5000

6000

10- 2 10- 1 1 10 102VDS (V)

C(pF)

Ciss

Coss

Crss

Fig. 14. Input, output and reverse transfer capacitancesas a function of drain-source voltage; typicalvalues





03na62

0

20

40

60

80

100

0 0.5 1.0 1.5 2.0VSD (V)

IS(A)

Tj = 175 °C Tj = 25 °C

Fig. 15. Source current as a function of source-drain voltage; typical values





11. Package outline

ReferencesOutlineversion

Europeanprojection Issue date

IEC JEDEC JEITA

SOT404

sot404_po

06-03-1613-02-25

Unit

mmmaxnommin

4.5

4.1

1.40

1.27

1.45

1.05

0.64

0.46

11 1.6

1.2

A

Dimensions (mm are the original dimensions)

Plastic single-ended surface-mounted package (D2PAK); 3 leads (one lead cropped) SOT404

A1 b

0.85

0.60

b2 c D D1 E e HD Lp Q

2.5415.8

14.8

2.6

2.2

10.3

9.7

2.9

2.1

0 5 mm

scale

e e

E

b

D1

HD

D

b2

Q

Lp

c

A1

A

1 3

2

mountingbase

Fig. 16. Package outline D2PAK (SOT404)





12. Legal information

12.1 Data sheet statusDocumentstatus [1][2]

Productstatus [3]

Definition

Objective[short] datasheet

Development This document contains data fromthe objective specification for productdevelopment.

Preliminary[short] datasheet

Qualification This document contains data from thepreliminary specification.

Product[short] datasheet

Production This document contains the productspecification.

[1] Please consult the most recently issued document before initiating orcompleting a design.

[2] The term 'short data sheet' is explained in section "Definitions".[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case ofmultiple devices. The latest product status information is available onthe Internet at URL http://www.nexperia.com.

12.2 DefinitionsPreview — The document is a preview version only. The document is stillsubject to formal approval, which may result in modifications or additions.Nexperia does not give any representations or warranties as tothe accuracy or completeness of information included herein and shall haveno liability for the consequences of use of such information.

Draft — The document is a draft version only. The content is still underinternal review and subject to formal approval, which may result inmodifications or additions. Nexperia does not give anyrepresentations or warranties as to the accuracy or completeness ofinformation included herein and shall have no liability for the consequencesof use of such information.

Short data sheet — A short data sheet is an extract from a full data sheetwith the same product type number(s) and title. A short data sheet isintended for quick reference only and should not be relied upon to containdetailed and full information. For detailed and full information see therelevant full data sheet, which is available on request via the local Nexperiasales office. In case of any inconsistency or conflict with theshort data sheet, the full data sheet shall prevail.

Product specification — The information and data provided in a Productdata sheet shall define the specification of the product as agreed betweenNexperia and its customer, unless Nexperia andcustomer have explicitly agreed otherwise in writing. In no event however,shall an agreement be valid in which the Nexperia productis deemed to offer functions and qualities beyond those described in theProduct data sheet.

12.3 DisclaimersLimited warranty and liability — Information in this document is believedto be accurate and reliable. However, Nexperia does not giveany representations or warranties, expressed or implied, as to the accuracyor completeness of such information and shall have no liability for theconsequences of use of such information. Nexperia takes noresponsibility for the content in this document if provided by an informationsource outside of Nexperia.

In no event shall Nexperia be liable for any indirect, incidental,punitive, special or consequential damages (including - without limitation -lost profits, lost savings, business interruption, costs related to the removalor replacement of any products or rework charges) whether or not suchdamages are based on tort (including negligence), warranty, breach ofcontract or any other legal theory.

Notwithstanding any damages that customer might incur for any reasonwhatsoever, Nexperia’s aggregate and cumulative liability towardscustomer for the products described herein shall be limited in accordancewith the Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right tomake changes to information published in this document, including withoutlimitation specifications and product descriptions, at any time and withoutnotice. This document supersedes and replaces all information supplied priorto the publication hereof.

Suitability for use in automotive applications — This Nexperiaproduct has been qualified for use in automotiveapplications. Unless otherwise agreed in writing, the product is not designed,authorized or warranted to be suitable for use in life support, life-critical orsafety-critical systems or equipment, nor in applications where failure ormalfunction of a Nexperia product can reasonably be expectedto result in personal injury, death or severe property or environmentaldamage. Nexperia and its suppliers accept no liability forinclusion and/or use of Nexperia products in such equipment orapplications and therefore such inclusion and/or use is at the customer's ownrisk.

Quick reference data — The Quick reference data is an extract of theproduct data given in the Limiting values and Characteristics sections of thisdocument, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of theseproducts are for illustrative purposes only. Nexperia makes norepresentation or warranty that such applications will be suitable for thespecified use without further testing or modification.

Customers are responsible for the design and operation of theirapplications and products using Nexperia products, and Nexperiaaccepts no liability for any assistance with applications orcustomer product design. It is customer’s sole responsibility to determinewhether the Nexperia product is suitable and fit for thecustomer’s applications and products planned, as well as for the plannedapplication and use of customer’s third party customer(s). Customers shouldprovide appropriate design and operating safeguards to minimize the risksassociated with their applications and products.

Nexperia does not accept any liability related to any default,damage, costs or problem which is based on any weakness or defaultin the customer’s applications or products, or the application or use bycustomer’s third party customer(s). Customer is responsible for doing allnecessary testing for the customer’s applications and products using Nexperiaproducts in order to avoid a default of the applicationsand the products or of the application or use by customer’s third partycustomer(s). Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined inthe Absolute Maximum Ratings System of IEC 60134) will cause permanentdamage to the device. Limiting values are stress ratings only and (proper)operation of the device at these or any other conditions above thosegiven in the Recommended operating conditions section (if present) or theCharacteristics sections of this document is not warranted. Constant orrepeated exposure to limiting values will permanently and irreversibly affectthe quality and reliability of the device.

Terms and conditions of commercial sale — Nexperiaproducts are sold subject to the general terms and conditions of commercialsale, as published at http://www.nexperia.com/profile/terms, unless otherwiseagreed in a valid written individual agreement. In case an individualagreement is concluded only the terms and conditions of the respectiveagreement shall apply. Nexperia hereby expressly objects toapplying the customer’s general terms and conditions with regard to thepurchase of Nexperia products by customer.

http://www.nexperia.com/profile/terms





No offer to sell or license — Nothing in this document may be interpretedor construed as an offer to sell products that is open for acceptance or thegrant, conveyance or implication of any license under any copyrights, patentsor other industrial or intellectual property rights.

Export control — This document as well as the item(s) described hereinmay be subject to export control regulations. Export might require a priorauthorization from competent authorities.

Translations — A non-English (translated) version of a document is forreference only. The English version shall prevail in case of any discrepancybetween the translated and English versions.

12.4 TrademarksNotice: All referenced brands, product names, service names andtrademarks are the property of their respective owners.





13. Contents1 General description ............................................... 12 Features and benefits ............................................13 Applications ........................................................... 14 Quick reference data ............................................. 15 Pinning information ...............................................26 Ordering information .............................................27 Marking ................................................................... 28 Limiting values .......................................................29 Thermal characteristics .........................................410 Characteristics .......................................................511 Package outline ................................................... 1012 Legal information .................................................1112.1 Data sheet status ............................................... 1112.2 Definitions ...........................................................1112.3 Disclaimers .........................................................1112.4 Trademarks ........................................................ 12

© Nexperia B.V. 2017. All rights reservedFor more information, please visit: http://www.nexperia.comFor sales office addresses, please send an email to: [email protected] Date of release: 13 March 2014

BUK9640-100A - assets.nexperia.com · BUK9640-100A mc,)cMoNµk2k≤=Q1ksiiMoLvauMcucMlcn Nexperia...

Documents

Transcript of BUK9640-100A - assets.nexperia.com · BUK9640-100A mc,)cMoNµk2k≤=Q1ksiiMoLvauMcucMlcn Nexperia...