BS identifier Title Committee Status Final Review...

Email your comments to: [email protected] Your email subject line: eg: 2016 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee

of 148 January 2016

BS identifier Title Committee Status Final

Review Outcome

BS 5N 100-5:2006 Aircraft oxygen systems and

equipment -- Guide to fire and explosion hazards associated with

oxygen, including handling, storage and replenishment

ACE/1 confirmed (2011)

BS M 93:2005 Protection of magnesium-rich alloys

against corrosion. Specification

ACE/1 confirmed (2011) Reconfirm

BS 2M 47:1990 Specification for retreading of cross

ply tyres for aircraft


BS 2A 241:2005+A2:2011

General requirements for steel protruding-head bolts of tensile

strength 1250 MPa (180000 lbf/in2) or greater. Specification

ACE/12 current Confirm

BS M 33:1970 Specification for dimensions of elastomeric toroidal sealing rings

(inch series) to Class 1 tolerances

for aircraft

ACE/12 replaced by BS M 48:1976

BS A 275-A

280:1981+A2:2011

Specification for hexagon self-

locking nuts with non-metallic locking inserts. Metric series


BS SP 13; 14; 15 and

16:1949+A4:2011

Specification for washers for

aircraft purposes. (primarily for packing purposes)


BS A 274:1981 Specification for procurement of alloy steel bolts, metric, with a

minimum tensile strength of 1100

MPa


BS 2A 293:2005 Procurement of self-locking nuts

with non-metallic locking elements.

Metric series. Specification


BS SP 10 &

11:1949+A3:2011

Specification for washers for

aircraft purposes (primarily for facing purposes)


BS SP 126 &

127:1959+A3:2011

Washers for unified hexagons for

aircraft (primarily for facing purposes)


BS SP 57 and

58:1955+A3:2011

Specifications for Rivet burrs for

aircraft


BS SP 86:1959 100$0D countersunk head steel rivets for aircraft


BS SP 76:1958 Snap head steel rivets for aircraft ACE/12 current Confirm

BS M 44:1974 Specification for identification of aircraft servicing, maintenance,

ground handling and safety/hazard

points


BS 3G 100-

2.3.13:1973

Specification for general

requirements for equipment for use in aircraft. All equipment.

Environmental conditions -- Resistance to fire in designated fire

zones



of 148 January 2016

BS 3G 100-2.3.4:1972 Specification for general


Environmental conditions -- Differential pressure requirements




Environmental conditions -- Temperature-pressure

requirements


BS 3G 100-2.3.0:1972 Specification for general requirements for equipment for use

in aircraft. All equipment.

Environmental conditions -- Standard test requirements




Environmental conditions -- Acceleration requirements


BS 3G 100-

2.3.12:1991



Environmental conditions -- Fluid contamination


BS 3G 100-

2.3.14:1973



Environmental conditions -- Acoustic vibration




Environmental conditions --

Explosion-proofness




Environmental conditions --

Tropical exposure


BS 3G 100-

2.3.11:1973


requirements for equipment for use

in aircraft. All equipment. Environmental conditions -- Water-

proofness


BS 3G 100-

2.3.10:1974



in aircraft. All equipment. Environmental conditions -- Impact

icing


BS 3G 100-2.3.9:1972 Specification for general requirements for equipment for use

in aircraft. All equipment. Environmental conditions -- Ice

formation



of 148 January 2016



Environmental conditions -- Mould growth




Environmental conditions -- Vibration




Environmental conditions -- Salt

mist


BS 3G 100-2.2:1972 Specification for general


in aircraft. All equipment -- Magnetic influence


BS G 246:1991 Specification for cable ties for installation under controlled tension

on aircraft electric cable harnesses

ACE/6 partially replaced by parts of BS EN 4056 &

BS EN 4057

Confirm

BS G 194:1965 Specification for lever-operated manual switches for aircraft

ACE/6 replaced by BS G 224:1978

Confirm

BS G 200:1967 Specification for miniature lever-

operated manual switches

ACE/6 replaced by BS G

224:1978

Confirm

BS G 154:1958 Screws with captive washers for

aircraft

ACE/6 partially replaced by

BS G 203:1967

Confirm

BS G 264:2005 Specification for avionic data transmission interface systems.

Utilities bus

ACE/6/-/9 confirmed (2011) Reconfirm

BS 5L 101:2011 Procedure for inspection, testing and acceptance of aluminium-base

and magnesium-base ingots and castings

ACE/61 current

BS 3L 500:2011 Procedure for inspection, testing

and acceptance of wrought magnesium base alloys

ACE/61 current

BS 2S

201:2004+A1:2011

Carbon steel wire rod, patented

cold drawn carbon steel wire and springs. High duty unground wire.

Specification

ACE/61/-/15 current Confirm

BS 2S

202:2004+A1:2011

Carbon steel wire rod, patented

cold drawn carbon steel wire and springs. High duty ground wire.

Specification


BS 3B 27:2009 Specification for copper-zinc-aluminium-nickel-silicon alloy tube


BS 7L 37:1989 Specification for wire for solid cold-

forged rivets of aluminium-copper-

magnesium-silicon-manganese alloy (for use in the solution

treated and naturally aged condition) (not exceeding 10 mm

diameter) (Cu 4.4, Mg 0.5, Si 0.7,

Mn 0.8) (2014A)

ACE/61/-/24 confirmed (2011)


of 148 January 2016

BS L 102:1971 Specification for bars and extruded

sections of aluminium-copper-magnesium-silicon-manganese

alloy (solution treated and aged at room temperature) (not exceeding

200 mm diameter or minor

sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

ACE/61/-/24 replaced by BS EN

2100:1992

BS L 119:1975 Specification for ingots and

castings of aluminium-copper-nickel-manganese-titanium-

zirconium-cobalt-antimony alloy

(solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti

0.2, Zr 0.2, Co 0.2, Sb 0.2)


BS L 117:1975 Specification for tube of aluminium-

magnesium-silicon-copper-

chromium alloy (solution treated and artificially aged: not tested

hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu

0.28, Cr 0.2)


BS L 118:1975 Specification for tube of aluminium-magnesium-silicon-copper-

chromium alloy (solution treated

and artificially aged: tested hydraulically) (not exceeding 10

mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)



magnesium-silicon-manganese alloy (solution treated and

precipitation treated) (not exceeding 10 mm wall thickness)

(suitable for welding) (Mg 0.8, Si 1,

Mn 0.7)



copper-magnesium-silicon-manganese alloy (solution treated

and aged at room temperature)

(not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7,

Mn 0.8)


BS L 160:1976 Specification. Bars and extruded sections of aluminium-zinc-

magnesium-copper-chromium alloy (solution treated and artificially

aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)

ACE/61/-/24 replaced by BS EN 2127:1992

BS L 111:1971 Specification for bars and extruded

sections of aluminium-magnesium-silicon-manganese alloy (solution

treated and precipitation treated)

(suitable for welding) (Mg 0.8, Si 1, Mn 0.7)

ACE/61/-/24 replaced by BS EN

2326:1992


of 148 January 2016

BS 2L 77:1971 Specification for forging stock and

forgings of aluminium-copper-magnesium-silicon-manganese

alloy (solution treated and precipitation treated) (Cu 4.4, Mg

0.5, Si 0.7, Mn 0.8)


BS 2L 95:1971 Specification for plate of aluminium-zinc-magnesium-

copper-chromium alloy (solution treated, controlled stretched and

precipitation treated) (Zn 5.8, Mg

2.5, Cu 1.6, Cr 0.15)

ACE/61/-/24 replaced by BS EN 2126:1992

BS 3L 63:1971 Specification for tube of aluminium-

copper-mangesium-silicon-

manganese alloy (solution treated and precipitation treated) (Cu 4.4,

Mg 0.5, Si 0.7, Mn 0.8)


BS 4L 56:1986 Specification for tube of aluminium-2$9D% magnesium alloy (temper

designation-O) (seamless: tested

hydraulically) (not exceeding 12 mm wall thickness)


BS 2L 126:1970 Specification for ingots and

castings of magnesium-cerium-zinc-zirconium alloy (precipitation

treated) (rare earth metals 3.0, Zn

2.3, Zr 0.6)



castings of aluminium-copper-silicon alloy (solution treated and

aged at room temperature) (Cu 4,

Si 1)



castings of aluminium-copper-

silicon alloy (solution treated and artificially aged) (Cu 4, Si 1)


BS 4L 54:1986 Specification for tube of 99% aluminium (cold drawn: seamless:

tested hydraulically) (not exceeding 12 mm wall thickness)


BS 5L 36:1985 Specification for wire for solid, cold-forged rivets of 99.5%

aluminium (not exceeding 10 mm

diameter)


BS 6L 16:1985 Specification for sheet and strip of

99% aluminium (temper designation H14 or H24)


BS 6L 17:1985 Specification for sheet and strip of

99% aluminium (temper designation-O)


BS 2HR 650:2011 Specification for high expansion

heat-resisting steel bar and wire for the manufacture of bolts, studs,

set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V

0.3) (limiting ruling section 50 mm)



of 148 January 2016

BS 3HR 502:2011 Specification for nickel-chromium-

cobalt-titanium- aluminium heat-resisting alloy cold drawn and

solution treated wire for springs and springs (Nickel base, Cr 19.5,

Co 18.0, Ti 2.5, Al 1.5)


BS 3HR 504:2011 Specification for nickel-chromium-titanium heat-resisting alloy bar

and wire for rivets and rivets (Maximum diameter or minor

sectional dimension 20 mm) (Nickel

base, Cr 19.5, Ti 0.4)



cobalt-titanium- aluminium heat-

resisting alloy wire for thread inserts (Nickel base, Cr 19.5, Co

18.0, Ti 2.5, Al 1.5) (0.45 mm to 2 mm diameter)



cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for

springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)



cobalt-molybdenum- titanium-

aluminium heat-resisting alloy plate, sheet and strip (Nickel base,

Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)

ACE/61/-/48 current

BS 2HR 404:2011 Specification for nickel-cobalt-chromium-molybdenum- titanium-

aluminium heat-resisting alloy

seamless tubes (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)


BS 2HR 240:2011 Specification for cobalt-chromium-

tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip

(Cobalt base, Cr 20, W 15, Ni 10,

Mn 1.5)


BS 2HR 402:2011 Specification for nickel-chromium-cobalt-titanium-aluminium heat-

resisting alloy seamless tubes (Nickel base, Cr 19.5, Co 18.0, Ti

2.5, Al 1.5)


BS 3HR 401:2011 Specification for nickel-chromium-titanium-aluminium heat-resisting

alloy seamless tubes (Nickel base,

Cr 19.5, Ti 2.2, Al 1.4)



titanium heat-resisting alloy seamless tubes (Nickel base, Cr

19.5, Ti 0.4)


BS 3TA 11:2009 Specification for bar and section for

machining of titanium-aluminium -

vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling

section 150 mm)

ACE/61/-/49 partially replaced by

BS EN 3355:2012


of 148 January 2016

BS F 159:2006 Properties of elastomeric toroidal

sealing rings ("O" rings) manufactured from oil resistant

silicone rubber material conforming to BS F 153. Specification



sealing rings ("O" rings)

manufactured from ethylene-propylene rubber material

conforming to BS F 156. Specification



sealing rings ("O" rings) manufactured from fluorosilicone

rubber material released to BS F 154. Specification


BS PL 4:2005 Properties of unsaturated polyester resins for low pressure laminating

of high strength fibre reinforced composites. Specification


BS PL 8:2005 Fibrous polyamide material for use as an explosion suppressant and as

a baffle material in aircraft fuel tanks. Specification


BS PL 9:2005 Fibrous polyamide material for use as an explosion suppressant and as

a baffle material in aircraft fuel

tanks. Test methods


BS F 136:1989 Specification for pigmented

chlorosulphonated polyethylene rubber-coated nylon fabric (190

g/m$u2) for aerospace purposes


BS PL 6:2005 Properties of unsaturated polyester

resins for low pressure laminating of glass fibre reinforced

composites. Specification


BS PL 5:2005 Unsaturated polyester resins for

low pressure laminating of high

strength fibre reinforced composites. Test methods


BS PL 7:2005 Unsaturated polyester resins for low pressure laminating of glass

fibre reinforced laminates. Test methods


BS F 156:2006 Properties of fluid resistant

ethylene-propylene rubber sheet, mouldings and extrusions.

Specification


BS 4F 124:1996 Specification for woven nylon 6.6 narrow fabrics for aerospace

purposes (nominally 940 dtex yarns)


BS F 157:2006 Properties of high tear strength

silicone rubber sheet, mouldings and extrusions. Specification



of 148 January 2016

BS F 152:2006 Properties of silicone rubber sheet,

mouldings and extrusions (general purpose). Specification


BS F 153:2006 Properties of oil resistant silicone

rubber sheet, mouldings and extrusions. Specification


BS F 154:2006 Properties of fluorosilicone rubber sheet, mouldings and extrusions.

Specification


BS 4F 123:1996 Woven nylon narrow fabrics for aerospace purposes (nominally 235

dtex yarns)


BS 3F 121:1995 Specification for metallic slide fasteners for aerospace purposes


BS F 143:1993 Specification for para-aramid

braided cords for aerospace

purposes


BS 2F 52:1959 Flax reinforcement webbing for

aeronautical purposes


BS 2X 34:1998 Specification for two component

polyurethane finish for aerospace purposes


BS G 257-1:1998 Design of electromagnetic hazard protection of civil aircraft -- Guide

to theory and threats


BS G 257-2:1998 Design of electromagnetic hazard protection of civil aircraft -- Guide

to protection


BS 8412:2004 Equipment for crop protection. Performance requirements for

application systems used to make spatially variable applications to

field crops. Specification

AGE/15 confirmed (2011) Reconfirm

BS 6356-9:1996 Spraying equipment for crop

protection -- Specification for systems for closed transfer of liquid

formulations



protection -- Specification for performance limits for field

spraying nozzles



protection -- Guide for typical data

sheet layout



protection -- Specification for

induction hoppers


BS 7411:1991 Specification for lever operated

knapsack sprayers


BS 4115:1993 Specification for compression

knapsack sprayers


BS 7562-6:1992 Planning, design and installation of irrigation schemes -- Guide for

feasibility and implementation procedures



of 148 January 2016

BS 7562-2:1992 Planning, design and installation of

irrigation schemes -- Guide for acquisition of site data


BS 7562-5:1993 Planning, design and installation of

irrigation schemes -- Guide for irrigation equipment


BS 7562-4:1992 Planning, design and installation of irrigation schemes -- Guide to

water resources


BS 7562-1:1992 Planning, design and installation of irrigation schemes -- Glossary of

terms


BS 4742-6:1988 Hydraulic equipment for agricultural machinery --

Specification for dimensions and location of agricultural tractor

hydraulic return to sump porting


BS 4742-8:1990 Hydraulic equipment for

agricultural machinery -- Method for colour coding of remote

hydraulic power services and controls on agricultural tractors


BS 4742-7:1989 Hydraulic equipment for agricultural machinery --

Specification for port connections for agricultural trailed vehicle

hydraulic brake couplings


BS 3986-1:1998 Methods of test for drying performance of agricultural grain

dryers -- General procedures and limited requirements for wheat


BS 3986-2:1998 Methods of test for drying performance of agricultural grain

dryers -- Additional procedures and

crop specific requirements


BS 6142:1981 Specification for presentation of

technical data on hydraulic systems of agricultural tractors and

machinery


BS 4639:1987 Specification for brakes and

braking systems for towed

agricultural vehicles


BS 5401:1990 Guide to information content and

presentation of operators' manuals

provided for tractors and machinery for agriculture and

forestry


BS 2468-1:1994 Glossary of terms and classification

relating to agricultural machinery

and implements. -- Power and tractive units


BS 6736:1986 Code of practice for hand signalling for use in agricultural operations


BS 7986:2005 Data quality metrics for industrial

measurement and control systems. Specification

AMT/7 confirmed (2011) Reconfirm


of 148 January 2016

BS AU 40-4a:1966 Specification for motor vehicle

lighting and signalling equipment -- Sealed beam headlamps

AUE/1 confirmed (2011)

BS AU 156:1971 Recommendations for aiming of

headlamps and auxiliary lamps on motor vehicles


BS AU 47:1965 Specification for advance warning triangle to indicate temporary

obstructions

AUE/1 confirmed (2011) Reconfirm

BS AU 152:1970 Specification for rear marking plates for vehicles


BS AU 162a:1976 Specification for headlamp optical

aiming devices


BS AU 242a:1998 Automotive windscreen repair.

Code of practice


BS AU 200-2a:1984 Spray reducing devices for heavy goods vehicles -- Specification for

performance of suppression

material and devices, and air/water separating material and devices


BS AU 190:1983 Specification for interface

dimensions and fixing bolts for the mounting of overrun devices on

delta shaped drawbars of trailers

up to 2000 kg


BS AU 29:1964 Specification for drawbar eyes and

forecarriage pins for connection between trailers of 5-35 tons gross

weight and towing vehicle


BS AU 2a:1970 Specification for dimensions of

3$9H - 4$9H in diameter fifth

wheel king pin for use with extra heavy duty semi-trailers


BS AU 146b:1970 Specification for standard automatic roller-type coupling for

semi-trailers not exceeding 7$9D tons laden weight


BS AU 30b:1970 Specification for standard

automatic roller-type coupling for semi-trailers of 7 tons to 14$9L

tons laden weight


BS AU 114b:1979 Specification for strength requirements of towing brackets

and coupling balls for caravans and light trailers


BS AU 210-2:1994 Drawbars for caravans and light trailers -- Specification for the

design of aluminium drawbars and

chassis


BS AU 217-2:1989 Maximum road speed limiters for

motor vehicles -- Specification for

system and component requirements


BS AU 200-1a:1984 Spray reducing devices for heavy goods vehicles -- Specification for

design of containment devices



of 148 January 2016

BS AU 25:1964 Specification for towing hook for

use between trailers of 5-14 tons gross weight and towing vehicle


BS AU 27:1964 Specification for towing hook for

use between trailers of 5-35 tons gross weight and towing vehicle


BS AU 26:1964 Specification for towing jaw for use between trailers of 5-16 tons gross



BS AU 28:1964 Specification for towing jaw for use between trailers of 5-35 tons gross



BS AU 217-1a:1987 Maximum road speed limiters for motor vehicles -- Specification for

installed requirements


BS AU 3:1970 Specification for clearance dimensions and fifth wheel

positions for tractors and semi-trailers


BS AU 181:1982 Specification for interface

dimensions for demountable vehicle body systems


BS AU 24a:1989 Specification for towing

connections for trailers up to 5000 kg gross mass


BS 6765-4:1987 Leisure accommodation vehicles.

Caravans -- Specification for undergear


BS AU 267:1998 Code of practice for breakaway cables and secondary couplings


BS AU 5:1963 Specification for dimensions of a 'contact' type coupling for vacuum

and pressure braking systems on trailers and semi-trailers

AUE/15 partially replaced by BS AU 138a:1980

Confirm

BS AU 91:1965 Specification for dimensions of electrical cable connectors for

starter battery taper terminal posts (cars and light commercial vehicles

using positive earth system)


BS AU 198:1984 Specification for electrical

connections between towing vehicles and trailers with 24 V

electrical equipment: type 24 S (supplementary)


BS AU 197:1984 Specification for electrical

connections between towing vehicles and trailers with 24 V

electrical equipment: type 24 N

(normal)


BS AU 16a:1989 Specification for electrical cable

connectors (17.5 A maximum

continuous rating)


BS AU 7a:1983 Specification for colour code for

road vehicle electrical cables


BS AU 207:1986 Specification for dimensions of car

radio installation space



of 148 January 2016

BS AU 209-2:1988 Vehicle security -- Specification for

security systems against theft of in-car equipment for entertainment

and communication purposes


BS AU 209-5b:1996 Vehicle security -- Specification for

central power locking systems for passenger cars and car derived

vehicles



security marking of glazing for

passenger cars and car derived vehicles


BS AU 209-6a:1996 Vehicle security -- Specification for dead locking systems for passenger

cars and car derived vehicles


BS AU 209-4a:1995 Vehicle security -- Specification for

security glazing for passenger cars

and car derived vehicles


BS AU 175-4a:1997 Vehicle identification numbers

(VIN) -- Specification for a visible

vehicle identification number


BS AU 209-1a:1992 Vehicle security -- Specification for

locking systems for passenger cars and car derived vehicles



locking systems for goods vehicle driver's compartments



locking systems for goods vehicle load compartments


BS AU 209-0:1996 Vehicle security -- Guide to the

application of security devices/systems to vehicles


BS AU 223a:2006 Design, construction performance

and marking of vehicle support stands for cars and light vans.

Specification


BS AU 187:2000 Tow rope assemblies for towing

passenger cars and light vans


BS 4585-18:1996 Methods of test for spices and

condiments -- Determination of total capsaicinoid content of chillies

and chilli oleoresins (high-performance liquid

chromatographic method)

AW/-/2 confirmed (2011) Reconfirm

BS 7087-29:1997 Herbs and spices ready for food use -- Specification for dried whole

dill seed, dill leaves and ground dill


BS 7087-24:1996 Herbs and spices ready for food use -- Specification for dried

pimento (allspice) (whole and ground)



condiments -- Determination of moisture content (entrainment

method)



of 148 January 2016

BS 7087-12:1992 Herbs and spices ready for food

use -- Specification for dried basil (bouquets, rubbed and ground)



use -- Specification for dried rosemary (whole, rubbed and

ground)



use -- Specification for black and

white pepper (whole and ground)



use -- Specification for dried

marjoram (whole, rubbed and ground)



parsley (cut, rubbed and ground)



mustard seeds (whole and ground)



caraway seeds (whole and ground)


BS 7087-10:1996 Herbs and spices ready for food use -- Specification for dried mint

(whole, rubbed and ground)


BS 7087-16:1993 Herbs and spices ready for food use -- Specification for oregano

(whole, rubbed and ground)



use -- Specification for dried

tarragon (whole and ground)



use -- Specification for coriander

seeds (whole and ground)



use. -- Specification for fennel seeds (whole and ground)



use -- Specification for dried fenugreek (whole or ground)



condiments -- Determination of non-volatile ether extract



condiments -- Determination of Scoville index of chillies



use -- Specification for dried thyme (whole and ground)



sesame seeds (dehulled)


BS 7087-3:1996 Herbs and spices ready for food use -- Specification for dried sage

(whole and ground)



of 148 January 2016


use -- Specification for turmeric (whole and ground)



use -- Specification for dried nutmeg and dried mace


BS 7087-15:1993 Herbs and spices ready for food use -- Specification for cinnamon

(whole and ground)


BS 7087-17:1993 Herbs and spices ready for food use -- Specification for chillies

(whole and ground)


BS 7087-26:1996 Herbs and spices ready for food use -- Specification for dehydrated

garlic


BS 7087-25:1996 Herbs and spices ready for food use -- Specification for dehydrated

onion


BS 3936-9:1998 Nursery stock -- Specification for bulbs, corms and tubers

AW/1 confirmed (2011) Reconfirm

BS 3936-10:1990 Nursery stock -- Specification for

ground cover plants


BS 3936-7:1989 Nursery stock -- Specification for bedding plants


BS 3936-3:1990 Nursery stock -- Specification for fruit plants


BS 3936-2:1990 Nursery stock -- Specification for

roses


BS 998:1990 Specification for vacuum salt for food use


BS 5226:1991 Code of practice for equipment and procedures for the cleaning and

disinfecting of milking machine installations


BS 5305:1984 Code of practice for cleaning and disinfecting of plant and equipment

used in the dairying industry


BS 4285-4:1991 Microbiological examination for dairy purposes -- Methods for

assessment of hygienic conditions


BS 7771:1994 Code of practice for pasteurization of milk on farms and in small

dairies


BS 684-0.1:1995 Methods of analysis of fats and

fatty oils. General introduction --

General procedures and list of determinations in BS 684


BS 684-1.11:1976 Methods of analysis of fats and fatty oils. Physical methods --

Determination of penetration value


BS 684-1.13:1976 Methods of analysis of fats and fatty oils. Physical methods --

Determination of cooling curve


BS 684-1.5:1987 Methods of analysis of fats and

fatty oils. Physical methods --

Determination of cloud point



of 148 January 2016

BS 5190:1985 Specification for pipeline filters,

filter bodies and filter elements for milking installations


BS 4317-20:1999 Methods of test for cereals and

pulses -- Determination of water absorption of flour and rheological

properties of doughs using a farinograph


BS 4317-19:1990 Methods of test for cereals and

pulses -- Determination of protein

quality of wheat by the sodium dodecyl sulphate (SDS) test


BS 4317-21:1999 Methods of test for cereals and pulses -- Determination of

rheological properties of doughs using an extensograph


BS 4317-18:1988 Methods of test for cereals and pulses -- Determination of hidden

insect infestation


BS 734C:1962 Measurement of the density of milk using a hydrometer -- Percentage

of total solids and non-fatty solids in milk corresponding to given fat

content and observed density fat

content range 2-6 per cent (with fat in the liquid state)


BS 3095-2:1988 Methods for determination of the freezing-point depression of milk --

Recommendations for the interpretation of the freezing-point

depression of herd milk


BS 1743-6.1:1983 Methods for analysis of dried milk

and dried milk products. Assessment of the heat class of

dried milk -- Heat number method (reference method)


BS 1743-4:1980 Methods for analysis of dried milk

and dried milk products -- Determination of the dispersibility

and the wetting time of instant dried milk


BS 1741-6.1:1990 Methods for chemical analysis of

liquid milk and cream. Determination of casein nitrogen

content of liquid milk -- Reference method



liquid milk and cream. Determination of casein nitrogen

content of liquid milk -- Routine

method


BS 4938-2P:1982 Dirt content of milk -- Photographic

standards for the method for the

determination of visible dirt content of milk (rapid method)



of 148 January 2016


liquid milk and cream. Determination of the nitrogen




liquid milk and cream. Determination of the nitrogen

content of liquid milk -- Routine method


BS 1743-1:1986 Methods for analysis of dried milk

and dried milk products -- General introduction, including preparation

of laboratory samples



liquid milk and cream.

Determination of titratable acidity -- Method for liquid milk


BS 1741-10.2:1989 Methods for chemical analysis of liquid milk and cream.

Determination of titratable acidity -- Method for cream


BS 1741-1:1987 Methods for chemical analysis of liquid milk and cream -- General

introduction including preparation of samples


BS 1742-1:1990 Methods for chemical analysis of condensed milks -- General

introduction, including preparation

of test samples



liquid milk and cream. Determination of lactose content --

Reference method



liquid milk and cream. Determination of lactose content --

Routine method


BS 1741-8:1988 Methods for chemical analysis of liquid milk and cream --

Determination of chloride content

of liquid milk


BS 1743-19:1985 Methods for analysis of dried milk and dried milk products --

Determination of scorched particles

content



condensed milks. Determination of

nitrogen content -- Reference method


BS 770-2:1976 Methods for chemical analysis of

cheese -- Determination of water content (reference and routine

methods)



liquid milk and cream -- Detection of detergent/disinfectant residues



of 148 January 2016


condensed milks. Determination of nitrogen content -- Routine method


BS 734-1:1973 Measurement of the density of milk

using a hydrometer -- Specification for hydrometers for use in milk


BS 5272:1975 Method for simultaneous routine determination of the water

contents of a batch of dried milk

samples



liquid milk and cream --

Determination of ash from liquid milk


BS 3095-1.2:1988 Methods for determination of the freezing-point depression of milk.

Methods -- Hortvet method


BS 770-8:1987 Methods for chemical analysis of cheese -- Determination of

nitrogen content (reference

method)



condensed milks -- Determination of ash from condensed milks


BS 4938-2:1982 Dirt content of milk -- Method for

the determination of visible dirt content (rapid method)


BS 6248-1:1982 Caseins and caseinates -- General

introduction, including preparation of laboratory samples


BS 6248-6:1982 Caseins and caseinates -- Method

for determination of lactose content (photometric method)


BS 3095-3:1981 Methods for determination of the

freezing-point depression of milk -- Storage of samples


BS 4938-1:1982 Dirt content of milk -- Method for the determination of dirt content

(reference method)

AW/5 confirmed (2011)

BS 5086-4:1985 Analysis of butter -- Method for determination of salt content

(reference method)


BS 5086-3:1984 Analysis of butter -- Method for determination of water content

(routine method)


BS 5086-1:1984 Analysis of butter -- General introduction including preparation

of samples


BS 5086-7:1991 Analysis of butter -- Method for determination of pH of butter

serum



cheese -- Determination of pH

value


BS 734-2:1959 Measurement of the density of milk

using a hydrometer -- Methods



of 148 January 2016


cheese -- General introduction


BS 1743:1968 Methods for analysis of dried milk and dried milk products


BS 4401-4:1970 Methods of test for meat and meat

products -- Determination of total

fat content



products -- Determination of nitrate content



products -- Determination of nitrite content


BS 4285-3.9.2:1992 Microbiological examination for

dairy purposes. Methods for detection and/or enumeration of

specific groups of microorganisms. Detection of Salmonella --

Screening method using electrical

conductance


BS 4285-3.4.2:1989 Microbiological examination for

dairy purposes. Methods for

detection and/or enumeration of specific groups of microorganisms.

Enumeration of lipolytic microorganisms -- Tributyrin agar

method


BS 4285-3.5:1988 Microbiological examination for

dairy purposes. Methods for detection and/or enumeration of

specific groups of microorganisms -

- Enumeration of proteolytic microorganisms


BS 4285-2.5:1989 Microbiological examination for

dairy purposes. Methods of general application for enumeration of

microorganisms -- Enumeration of bacteria by direct microscopic

counts


BS 4285-3.2:1991 Microbiological examination for dairy purposes. Methods for

detection and/or enumeration of specific groups of microorganisms -

- Enumeration of thermoduric

bacteria


BS 5763-5:1981 Methods for microbiological

examination of food and animal

feeding stuffs -- Enumeration of micro-organisms. Colony count at

30$0DC (surface plate technique)


BS 4285-5.3:1987 Microbiological examination for dairy purposes. Ancillary methods -

- Test for inhibitory substances


BS 1722-9:2006 Fences -- Specification for mild steel (low carbon steel) fences with

round or square verticals and flat horizontals

B/201 confirmed (2011) Reconfirm


of 148 January 2016

BS 1722-17:2006 Fences -- Specification for electric

security fences. Design, installation and maintenance

B/201 confirmed (2011) Under

revision

BS 1722-8:2006 Fences -- Specification for mild

steel (low carbon steel) continuous bar fences and hurdles


BS 1722-18:2011 Fences -- Specification for free-standing temporary steel mesh

perimeter fencing panels

B/201 current Confirm

BS 1722-10:2006 Fences -- Specification for anti-intruder fences in chain link and

welded mesh


BS 1722-5:2006 Fences -- Specification for close-boarded fences and wooden

palisade fences

B/201 confirmed (2011)

BS 1722-2:2006 Fences -- Specification for strained wire and wire mesh netting fences


BS 1722-11:2006 Fences -- Specification for

prefabricated wood panel fences


BS 1722-14:2006 Fences -- Specification for open

mesh steel panel fences


revision

BS 1722-7:2006 Fences -- Specification for wooden post and rail fences


BS 1722-12:2006 Fences -- Specification for steel

palisade fences


revision

BS 1722-1:2006 Fences -- Specification for chain

link fences


BS 5709:2006 Gaps, gates and stiles. Specification


BS 8103-1:2011 Structural design of low-rise

buildings -- Code of practice for stability, site investigation,

foundations, precast concrete floors and ground floor slabs for

housing

B/204 current

BS 5395-2:1984 Stairs, ladders and walkways -- Code of practice for the design of

helical and spiral stairs


BS 4592-1:2006 Industrial type flooring and stair treads -- Metal open bar gratings.

Specification


BS 5395-4:2011 Code of practice for the design of

stairs for limited access


BS 6180:2011 Barriers in and about buildings.

Code of practice


BS 4592-5:2006 Industrial type flooring and stair treads -- Solid plates in metal and

glass reinforced plastics (GRP).

Specification

B/208/1 confirmed (2011) Reconfirm

BS 4592-4:2006 Industrial type flooring and stair

treads -- Glass reinforced plastics (GRP) open bar gratings.

Specification


BS 4592-2:2006 Industrial type flooring and stair

treads -- Expanded metal gratings. Specification



of 148 January 2016

BS 7370-1:1991 Grounds maintenance --

Recommendations for establishing and managing grounds

maintenance organizations and for design considerations related to

maintenance


BS 7370-3:1991 Grounds maintenance -- Recommendations for maintenance

of amenity and functional turf (other than sports turf)


BS 7370-2:1994 Grounds maintenance -- Recommendations for the

maintenance of hard areas

(excluding sports surfaces)



Recommendations for maintenance of soft landscape (other than

amenity turf)


BS 4428:1989 Code of practice for general

landscape operations (excluding hard surfaces)



Recommendations for the maintenance of water areas


PD 6682-5:2005 Aggregates -- Lightweight

aggregates for bituminous mixtures and surface treatments and for

unbound and bound applications. Guidance on the use of BS EN

13055-2


PD 6682-4:2003 Aggregates -- Lightweight aggregates for concrete, mortar

and grout. Guidance on the use of BS EN 13055-1


BS 812-104:1994 Testing aggregates -- Method for qualitative and quantitative

petrographic examination of

aggregates


BS 812-103.2:1989 Testing aggregates. Method for

determination of particle size distribution -- Sedimentation test


BS 812-123:1999 Testing aggregates -- Method for

determination of alkali-silica reactivity. Concrete prism method


BS 812-114:1989 Testing aggregates -- Method for determination of the polished-stone

value


BS 812-109:1990 Testing aggregates -- Methods for determination of moisture content


PD 6682-9:2003 Aggregates -- Guidance on the use

of European test method standards



determination of soundness


BS 5834-4:2011 Surface boxes, guards and underground chambers for the

purposes of utilities -- Specification

for utility chambers



of 148 January 2016

BS 5834-2:2011 Surface boxes, guards and

underground chambers for the purposes of utilities -- Specification

for surface boxes

B/504 current

BS 8542:2011 Calculating domestic water

consumption in non-domestic buildings. Code of practice


BS 1566-

1:2002+A1:2011

Copper indirect cylinders for

domestic purposes -- Open vented copper cylinders. Requirements

and test methods

B/504/-/10 current

BS 7942:2011 Thermostatic mixing valves for use

in care establishments. Requirements and test methods

B/504/-/8 current Confirm

BS 8525-2:2011 Greywater systems -- Domestic

greywater treatment equipment. Requirements and test methods

B/505/50 current

BS 6999:1989 Specification for vitreous-enamelled

low-carbon-steel flue pipes, other components and accessories for

solid-fuel-burning appliances with a rated output of 45 kW

B/506 current

BS 41:1973 Specification for cast iron spigot and socket flue or smoke pipes and

fittings


BS 567:1973 Specification for asbestos-cement

flue pipes and fittings, light quality


BS 835:1973 Specification for asbestos-cement

flue pipes and fittings, heavy quality

B/506 current

BS 7533-12:2006 Pavements constructed with clay,

natural stone or concrete pavers -- Guide to the structural design of

trafficked pavements constructed on a bound base using concrete

paving flags and natural stone

slabs


BS 7533-4:2006 Pavements constructed with clay,

natural stone or concrete pavers -- Code of practice for the

construction of pavements of

precast concrete flags or natural stone slabs


BS 1703:2005 Refuse chutes and hoppers.

Specification

B/508/1 confirmed (2011)

BS 792:1973 Specification for mild steel dustbins B/508/1 confirmed (2011)

BS 6779-4:1999 Highway parapets for bridges and

other structures -- Specification for parapets of reinforced and

unreinforced masonry construction


BS 1924-1:1990 Stabilized materials for civil

engineering purposes -- General requirements, sampling, sample

preparation and tests on materials

before stabilization

B/510 current


of 148 January 2016

BS 1924-2:1990 Stabilized materials for civil

engineering purposes -- Methods of test for cement-stabilized and lime-

stabilized materials

B/510 current

BS 598-1:2011 Sampling and examination of

bituminous mixtures for roads and other paved areas -- Methods for

the measurement of the rate of

spread of coated chippings and the temperature of bituminous

mixtures using non-contact temperature-measuring devices

and for the assessment of the compaction performance of a roller

B/510/1 current

BS 434-1:2011 Bitumen road emulsions --

Specification for anionic bitumen road emulsions

B/510/19 current

BS 3247:2011 Specification for salt for spreading

on highways for winter maintenance

B/510/21 current Confirm

BS 7941-1:1999 Methods for measuring the skid

resistance of pavement surfaces -- Side-way force coefficient routine

investigation machine

B/510/5 replaced by BS 7941-

1:2006

BS 6770:1988 Guide for exterior colours for park

homes (mobile homes), holiday caravans and transportable

accommodation units


BS 6767-1:1999 Transportable accommodation

units -- Recommendations for

design and construction of the basic unit


BS 6164:2011 Code of practice for health and

safety in tunnelling in the construction industry


BS 6187:2011 Code of practice for full and partial demolition


BS 4550-3.4:1978 Methods of testing cement. Physical tests -- Strength tests

B/516/12 replaced by BS EN 196-1:1995 as it is

quoted in other standards. Partially

replaced by BS 1881-131:1998

Confirm

BS 1881-119:2011 Testing concrete -- Method for

determination of compressive strength using portions of beams

broken in flexure (equivalent cube

method)

B/517 current

BS 8000-2.1:1990 Workmanship on building sites. Code of practice for concrete work

-- Mixing and transporting concrete

B/517 partially replaced by BS 8000-0:2014

BS 1881-113:2011 Testing concrete -- Method for making and curing no-fines test

cubes

B/517 current


determination of density of partially

compacted semi-dry fresh concrete

B/517/1 current


of 148 January 2016


determination of water absorption


BS 8443:2005 Specification for establishing the suitability of special purpose

concrete admixtures


BS 6319-3:1990 Testing of resin and polymer/cement compositions for

use in construction -- Methods for measurement of modulus of

elasticity in flexure and flexural

strength


BS 6319-6:1984 Testing of resin and

polymer/cement compositions for use in construction -- Method for

determination of modulus of

elasticity in compression


BS 6319-2:1983 Testing of resin and

polymer/cement compositions for

use in construction -- Method for measurement of compressive

strength


BS 1990-1:1984 Wood poles for overhead power

and telecommunication lines --

Specification for softwood poles


BS

4978:2007+A1:2011

Visual strength grading of

softwood. Specification

B/518 current

BS

5756:2007+A1:2011

Visual strength grading of

hardwood. Specification


BS 6206:1981 Specification for impact performance requirements for flat

safety glass and safety plastics for

use in buildings

B/520 partially replaced by BS EN 12600:2002

Confirm

BS 6262:1982 Code of practice for glazing for

buildings

B/520/4 partially replaced by

Parts 1-4 and 6-7 of BS 6262. It will be

withdrawn on

publication of BS 6262-5

BS 4485-4:1996 Water cooling towers -- Code of

practice for structural design and construction


BS 4485-3:1988 Water cooling towers -- Code of practice for thermal and functional

design


BS 4485-2:1988 Water cooling towers -- Methods for performance testing


PD 6688-1-1:2011 Recommendations for the design of

structures to BS EN 1991-1-1


PD 6688-2:2011 Background to the National Annex

to BS EN 1991-2 -- Traffic loads on bridges


CP 118:1969 The structural use of aluminium B/525/9 replaced by BS 8118-

1:1991 and BS 8118-2:1991

Confirm

PD 6694-1:2011 Recommendations for the design of

structures subject to traffic loading to BS EN 1997-1:2004

B/526 current


of 148 January 2016

BS 22475-3:2011 Geotechnical investigation and

testing. Sampling methods and groundwater measurements --

Conformity assessment of enterprises and personnel by third

party

B/526/3 current

BS 22475-2:2011 Geotechnical investigation and testing. Sampling methods and

groundwater measurements -- Qualification criteria for enterprises

and personnel

B/526/3 current

BS 1377-2:1990 Methods of test for soils for civil engineering purposes --

Classification tests

B/526/3 partially replaced by BS EN ISO 17892-

2:2014

Confirm

BS 8006-2:2011 Code of practice for strengthened/reinforced soils --

Soil nail design

B/526/4 current

BS 459:1988 Specification for matchboarded wooden door leaves for external

use


BS 8000-11:2011 Workmanship on building sites -- Internal and external wall and floor

tiling. Ceramic and agglomerated stone tiles, natural stone and

terrazzo tiles and slabs, and

mosaics. Code of practice

B/539 partially replaced by BS 8000-0:2014

Confirm

BS 2972:1989 Methods of test for inorganic

thermal insulating materials

B/540 partially replaced by

BS EN 13467 to BS EN 13472:2001

Confirm

BS 5250:2011 Code of practice for control of

condensation in buildings

B/540/2 current

BS 8201:2011 Code of practice for installation of flooring of wood and wood-based

panels

B/543 current

BS 8481:2006 Design, preparation and application of internal gypsum, cement,

cement and lime plastering

systems. Specification


BS 8298:1994 Code of practice for design and

installation of natural stone cladding and lining

B/545 replaced by BS 8298

Parts 1 to 4

BS 6925:1988 Specification for mastic asphalt for

building and civil engineering (limestone aggregate)


BS 5284:1993 Methods of sampling and testing

mastic asphalt used in building and civil engineering


CP 102:1973 Code of practice for protection of

buildings against water from the ground

B/546 partially replaced by

BS 8102:1990 and BS 8215:1991

Confirm

BS 2832:1957 Specification for hot applied damp

resisting coatings for solums


BS 743:1970 Specification for materials for damp-proof courses

B/546 partially replaced by BS 6398:1983, BS

6515:1984 and BS 8215:1991

Confirm


of 148 January 2016

BS 8218:1998 Code of practice for mastic asphalt

roofing


BS 8449:2005 Building and construction sealants with movement accommodation

factors greater than 25%. Method of test for determination of

adhesion/cohesion properties at

variable temperatures


BS 3712-2:1973 Building and construction sealants -

- Methods of test for seepage,

staining, shrinkage, shelf life and paintability


BS 3712-3:1974 Building and construction sealants -- Methods of test for application

life, skinning properties and tack-

free time



- Methods of test for homogeneity,

relative density and penetration



- Method of test for adhesion in peel


BS 5502-40:2005 Buildings and structures for

agriculture -- Code of practice for design and construction of cattle

buildings


BS 5502-

31:1995+A1:2011

Buildings and structures for

agriculture -- Guide to the storage

and handling of waste


BS 5502-11:2005 Buildings and structures for

agriculture -- Guide to regulations and sources of information


PD 6446:1970 Recommendations for the co-

ordination of dimensions in building. Combinations of sizes


BS 6750:1986 Specification for modular

coordination in building


BS 5606:1990 Guide to accuracy in building B/554 confirmed (2011)

BS 8541-2:2011 Library objects for architecture,

engineering and construction -- Recommended 2D symbols of

building elements for use in

building information modelling


BS 8220-3:2004 Guide for security of buildings against crime -- Storage, industrial

and distribution premises


BS 8220-1:2000 Guide for security of buildings against crime -- Dwellings


BS 2853:2011 Specification for the testing of steel

overhead runway beams for hoist blocks

CB/203 current Confirm

BS 8204-

3:2004+A2:2011

Screeds, bases and in situ floorings

-- Polymer modified cementitious levelling screeds and wearing

screeds. Code of practice



of 148 January 2016

BS 8204-

5:2004+A1:2011


-- Mastic asphalt underlays and wearing surfaces. Code of practice


BS 8204-

4:2004+A1:2011


-- Cementitious terrazzo wearing surfaces. Code of practice


BS 8204-2:2003+A2:2011

Screeds, bases and in situ floorings -- Concrete wearing surfaces. Code

of practice


BS 8204-7:2003 Screeds, bases and in-situ floorings -- Pumpable self-smoothing

screeds. Code of practice

CB/300 confirmed (2011) Reconfirm

BS 8534:2011 Construction procurement policies, strategies and procedures. Code of

practice


BS 8533:2011 Assessing and managing flood risk in development. Code of practice

CB/501 current

BS 6349-7:1991 Maritime structures -- Guide to the

design and construction of breakwaters

CB/502 confirmed (2011)

BS 6349-5:1991 Maritime structures -- Code of

practice for dredging and land reclamation


BS 5726:2005 Microbiological safety cabinets.

Information to be supplied by the purchaser to the vendor and to the

installer, and siting and use of cabinets. Recommendations and

guidance

CH/100 confirmed (2011) Reconfirm

BS 2588-2:1992 Portable sanitary pans for use in healthcare establishments --

Specification for reusable pans for

commode chairs


BS 3221-6:1987 Medicine measures -- Specification

for free-standing plastics medicine measuring spoons of 5 mL capacity


BS 2588-1:1992 Portable sanitary pans for use in healthcare establishments. --

Specification for reusable bed pans


BS 3221-7:1995 Medicine measures -- Specification for oral syringes delivering doses

up to and including 5 ml


BS 1823:1973 Specification for stainless steel hollow-ware for use in hospital

operating-theatres and wards


BS 3221-1:1985 Medicine measures -- Specification for medicine measures of 50 ml

total graduated capacity


BS 5452:1977 Specification for hospital hollow-ware made of plastics material


BS 7088:1989 Specification for pneumatic

tourniquet equipment


BS 3215:1995 Specification for reusable portable urinals


BS 5402:1976 Specification for patient trolleys CH/100 confirmed (2011)


of 148 January 2016

BS 8447:2005 Anaesthetic and respiratory

equipment. Hook-on fittings for the attachment of vaporizers to an

anaesthetic gas delivery device

CH/121/1 confirmed (2011) Reconfirm

BS 8532:2011 Terminal units for high flow

anaesthetic gas scavenging systems. Specification for probes

and type-specific connection points

CH/121/6 current Confirm

BS 7254-5:1990 Orthopaedic implants --

Specification for production of

castings made of cobalt-chromium-molybdenum alloy


BS 7251-1:1990 Orthopaedic joint prostheses -- Specification for general

requirements


BS 7254-2:1990 Orthopaedic implants -- Specification for general

requirements for materials and

finish


BS 8432:2005 Spinal orthoses. Guide to design CH/168 confirmed (2011) Reconfirm

BS 5194-2:1989 Surgical instruments -- Specification for instruments with

pivot joints (excluding cutting instruments)


BS 5194-4:1985 Surgical instruments --

Specification for scissors, shears and other jointed cutting

instruments


BS 2982:1992 Specification for materials and packaging of surgical scalpels with

detachable blades


BS 5194-3:1985 Surgical instruments -- Specification for dissecting forceps


BS 4274-1:2003 Visual acuity test types -- Test

charts for clinical determination of

distance visual acuity. Specification


BS 3970-2:1991 Sterilizing and disinfecting

equipment for medical products -- Specification for steam sterilizers

for aqueous fluids in sealed rigid

containers


BS 3970-5:1990 Sterilizing and disinfecting

equipment for medical products --

Specification for low temperature steam disinfectors

CH/198 confirmed (2011)

BS 2646-1:1993 Autoclaves for sterilization in laboratories -- Specification for

design, construction, safety and performance


BS 2646-5:1993 Autoclaves for sterilization in laboratories -- Methods of test for

function and performance


BS 2646-2:1990 Autoclaves for sterilization in laboratories -- Guide to planning

and installation



of 148 January 2016

BS 2646-3:1993 Autoclaves for sterilization in

laboratories -- Guide to safe use and operation


BS 2646-4:1991 Autoclaves for sterilization in

laboratories -- Guide to maintenance


BS 8599-1:2011 Workplace first aid kits -- Specification for the contents of

workplace first aid kits

CH/240 current

BS 5724-3.26:1990 Medical electrical equipment. Particular requirements for

performance -- Method for

declaring parameters for ultrasonic diagnostic equipment using test

objects


BS 6196:1989 Specification for sterile epidural

catheters and introducer needles

for single use


BS 6043-2.12:1994 Methods of sampling and test for

carbonaceous materials used in

aluminium manufacture. Electrode coke. -- Determination of particle

size distribution of fine coke

CII/24 confirmed (2011) Reconfirm

BS 6043-1.7:1988 Methods of sampling and test for carbonaceous materials used in

aluminium manufacture. Electrode

pitch -- Determination of apparent density (buoyancy method)


BS 6043-1.12:1994 Method of sampling and test for

carbonaceous materials used in aluminium manufacture. Electrode

pitch. -- Determination of

mesophase content


BS 5072-1:1974 Methods of test for sodium fluoride for industrial use -- Determination

of water-insoluble matter


BS 4993-1:1974 Methods of test for aluminium fluoride for industrial use --

Determination of fluorine content


BS 4993-3:1974 Methods of test for aluminium

fluoride for industrial use --

Determination of silica content


BS 5072-2:1974 Methods of test for sodium fluoride

for industrial use -- Determination

of moisture content


BS 5072-3:1975 Methods of test for sodium fluoride

for industrial use -- Determination of fluorine content



fluoride for industrial use -- Determination of iron content



oxide -- General introduction


BS 5050:1974 Methods of test for cryolite CII/24 confirmed (2011) Reconfirm


of 148 January 2016

BS 5688-0:1986 Methods of test for orthoboric acid

(boric acid), diboron trioxide (boric oxide), disodium tetraborates,

sodium perborates and crude sodium borates for industrial use --

General introduction


BS 6392-3:1983 Testing of ethanol for industrial use -- Method for determination of

carbonyl compounds content present in moderate amounts

(titrimetric method)


BS 6092-11:1981 Methods of sampling and test for

sodium and potassium silicates for industrial use -- Determination of

chloride content of sodium metasilicate



methanol content [0.10% (V/V) to 1.50% (V/V)] (visual colorimetric

method)


BS 6092-12:1981 Methods of sampling and test for sodium and potassium silicates for

industrial use -- Limit test for sulphate content of sodium

metasilicate


BS 6392-2:1983 Testing of ethanol for industrial use

-- Method for determination of carbonyl compounds content

present in small amounts (photometric method)



-- Method for determination of methanol content [0.01% (V/V) to

0.20% (V/V)] (photometric method)


BS 7319-12:1990 Analysis of sodium chloride for

industrial use -- Methods for determination of anti-caking

additives content of salt for food

use



sodium and potassium silicates for

industrial use -- Determination of matter insoluble in water


BS 6392-1:1983 Testing of ethanol for industrial use -- Method for detection of alkalinity

or determination of acidity to phenolphthalein


BS 6075-14:1981 Methods of sampling and test for sodium hydroxide for industrial use

-- Determination of matter insoluble in water


BS 6092-0:1981 Methods of sampling and test for sodium and potassium silicates for

industrial use -- General

introduction



of 148 January 2016


sodium hydroxide for industrial use -- Determination of copper content


BS 1595-1:1986 Propan-2-ol (isopropyl alcohol) for

industrial use -- Specification for propan-2-ol (isopropyl alcohol)


BS 6070-7:1981 Methods of sampling and test for sodium carbonate for industrial use

-- Determination of copper content


BS 6070-0:1981 Methods of sampling and test for sodium carbonate for industrial use

-- General introduction


BS 6075-0:1981 Methods of sampling and test for sodium hydroxide for industrial use

-- General introduction



aldehydes content



permanganate time



-- Method for determination of

esters content



-- Method of test for miscibility with

water


BS 1941:1993 Specification for 4-methylpentan-2-

one (isobutyl methyl ketone) for industrial use


BS 1595-2:1984 Propan-2-ol (isopropyl alcohol) for

industrial use -- Methods of test


BS 1940:1987 Specification for butanone (ethyl methyl ketone) for industrial use


BS 2713:1966 Specification for 2-ethoxyethanol (ethylene glycol monoethyl ether)


BS 662-3:1979 Carbon disulphide for industrial use

-- Additional methods of test


BS 576-2:1988 Acetic acid for industrial use -- Methods of test for acetic acid


BS 6376-3:1989 Reagents for chemical analysis -- Specifications (second series)


BS 576-1:1988 Acetic acid for industrial use. --

Specification for acetic acid


BS 6392-0:1983 Testing of ethanol for industrial use -- General introduction


BS 508-1:1986 Butan-1-ol for industrial use -- Specification for butan-1-ol


BS 3993:1966 Specification for hydrochloric acid,

commercial types 1 and 2


BS 506-1:1987 Methanol for industrial use. -- Specification for methanol


BS 509-1:1987 Acetone for industrial use -- Specification for acetone


BS 5962:1980 Specifications for naphthalene

(including test methods)



of 148 January 2016

BS 662-1:1979 Carbon disulphide for industrial

use. -- Specification


BS 1835:1991 Specification for 2-ethylhexan-1-ol for industrial use


BS 1994:1993 Specification for dichloromethane

(methylene chloride)


BS 4583:1991 Methods of test for higher alcohols

for industrial use


BS 3674:1981 Specification for sodium carbonate (technical grades)


BS 4130:1984 Specification for sodium hydroxide

(technical grades)


BS 4105:1990 Specification for liquid carbon

dioxide, industrial


BS 4774:1972 Methods of test for chloroform for industrial use


BS 508-2:1984 Butan-1-ol for industrial use --

Methods of test


BS 551:1990 Specification for butyl acetate for

industrial use


BS 553:1990 Specification for ethyl acetate for industrial use


BS 3591:1985 Specification for industrial

methylated spirits


BS 506-2:1984 Methanol for industrial use --

Methods of test


BS 4341:Addendum No. 1:1971

Methods of test for formic acid CII/26 confirmed (2011)

BS 509-2:1984 Acetone for industrial use --

Methods of test


BS 507:1985 Specification for ethanol for

industrial use


BS 579:1957 Specification for diethyl ether (technical)


BS 5634:1978 Methods of test for potassium

hydroxide


BS 4835:1973 Methods of test for plasticizer

esters


BS 4366:1993 Specification for industrial nitrogen CII/26 confirmed (2011) Reconfirm

BS 1834:1968 Specification for isopropyl acetate CII/26 confirmed (2011) Reconfirm

BS 4364:1993 Specification for industrial oxygen CII/26 confirmed (2011) Reconfirm

BS 2068:1970 Specification for acetic anhydride CII/26 confirmed (2011) Reconfirm

BS 3984:1982 Specification for sodium silicates CII/26 confirmed (2011) Reconfirm

BS 549:1970 Specification for diacetone alcohol CII/26 confirmed (2011) Reconfirm

BS 3947:1976 Specification for liquid chlorine CII/26 confirmed (2011) Reconfirm

BS 4341:1968 Methods of test for formic acid CII/26 confirmed (2011) Reconfirm

BS 552:1970 Specification for amyl acetate CII/26 confirmed (2011) Reconfirm

BS 4427-14:1989 Methods of test for sodium

tripolyphosphate (pentasodium triphosphate) and sodium

pyrophosphate (tetrasodium pyrophosphate) for industrial use --

Condensed phosphates for

industrial use (including foodstuffs): determination of

chloride content



of 148 January 2016


tripolyphosphate (pentasodium triphosphate) and sodium

pyrophosphate (tetrasodium pyrophosphate) for industrial use --

Condensed phosphates for

industrial use (including foodstuffs): determination of iron

content



tripolyphosphate (pentasodium

triphosphate) and sodium pyrophosphate (tetrasodium

pyrophosphate) for industrial use -- Separation by column

chromatography and determination

of the different phosphate forms


BS 4427-1:1969 Methods of test for sodium tripolyphosphate (pentasodium


pyrophosphate) for industrial use --

Determination of matter insoluble in water in sodium

tripolyphosphate


BS 4427-6:1974 Methods of test for sodium tripolyphosphate (pentasodium


pyrophosphate) for industrial use -- Estimation of pyrophosphate

content of sodium pyrophosphate





pyrophosphate) for industrial use -- Determination of particle size

distribution





pyrophosphate) for industrial use -- Determination of loss on ignition


BS 6829-2.1:1988 Analysis of surface active agents

(raw materials). Alkane sulphonates -- Method for

determination of total alkaline sulphonates content


BS 3762-3.10:1989 Analysis of formulated detergents -

- Methods for determination of short-chain

alkylbenzenesulphonates content



- Method for determination of low molecular mass alcohols content



of 148 January 2016

BS 1715-2.4:1989 Analysis of soaps. Quantitative test

methods -- Method for determination of free fatty acids

content


BS 3762-3.25:1989 Analysis of formulated detergents -- Methods for determination of

water and volatile matter content



- Method for determination of clear

point of liquid detergents



- Method for estimation of

carboxymethylcellulose content



- Method for determination of free formaldehyde content


BS 1715-2.9:1990 Analysis of soaps. Quantitative test

methods. -- Method for determination of EDTA content



- Method for determination of carbonate content



- Method for determination of chloride content



- Method for determination of ammonia content


BS 3762-2:1989 Analysis of formulated detergents -- Qualitative test methods


BS 1545:1990 Specification for liquid toilet soap CII/34 confirmed (2011) Reconfirm

BS 1912:1990 Specification for soap flakes CII/34 confirmed (2011) Reconfirm

BS 1914:1990 Specification for toilet soap CII/34 confirmed (2011) Reconfirm

BS 4405:1990 Specification for liquid soap CII/34 confirmed (2011) Reconfirm

BS 1911:1990 Specification for hard soap CII/34 confirmed (2011) Reconfirm

BS 1913:1990 Specification for soft soap CII/34 confirmed (2011) Reconfirm

BS 7959-2:2000 Materials used for the control of

liquid spillages -- Determination of water repellency or buoyancy for

hydrophobic (oil sorbent) materials


BS 7843-2:2012 Acquisition and management of

meteorological precipitation data from a raingauge network -- Code

of practice for operating

raingauges and managing precipitation data

CPI/113 current Confirm

BS 7843-1:2012 Acquisition and management of meteorological precipitation data

from a raingauge network -- Guide

for the design, development and review of a raingauge network

CPI/113 current Confirm

BS 1339-3:2004 Humidity -- Guide to the

measurement of humidity

CPI/29 confirmed (2011)

BS 8452:2010 Use of clamp-on (externally

mounted) ultrasonic flow-metering techniques for fluid applications.

Guide

CPI/30/5 current


of 148 January 2016

BS 1853-2:1995 Tubular fluorescent lamps for

general lighting service -- Specification for lamps used in the

United Kingdom not included in BS EN 60081, BS EN 60901, BS EN

61195 and BS EN 61199

CPL/34/1 confirmed (2011) Reconfirm

BS 1376:1974 Specification for colours of light signals

CPL/34/7 confirmed (2011)

BS 5415-

2.2:Supplement No.

1:1986

Safety of electrical motor-operated

industrial and commercial cleaning

appliances. Particular requirements -- Specification for type H industrial

vacuum cleaners for dusts hazardous to health

CPL/61/10 confirmed (2011) Reconfirm

BS 4995:1973 Recommendations for

measurement of the veiling glare index of lenses and optical systems

CPW/172 confirmed (2011) Reconfirm

BS 4793:1972 Recommendations for specifying

the optical performance of lenses for television cameras


BS 4779:1971 Recommendations for measurement of the optical

transfer function of optical devices


BS 5109:1974 Glossary of terms used in assessing the performance of optical devices

and systems


BS 4301:1991 Recommendations for preparation of drawings for optical elements

and systems


BS 5550-5.4.1:1986 Cinematography. Common to more than one gauge. Sound -- Code of

Practice for the identification of systems for synchronization of

unperforated audio tape with

motion-picture film and videotape


BS 5550-6.4:1980 Cinematography. Television usage

-- Recommendations for the density range, contrast and colour

balance of films and slides for

colour television


BS 5550-7.5.4:1981 Cinematography. Production and

presentation. Film and television

location lighting -- Specification for single pole high current plugs and

socket connectors

CPW/4 current

BS 3944-1:1992 Colour and diffusion filter material for theatre, television and similar

entertainment purposes. --

Specification for flammability and dimensional stability


BS 7909:2011 Code of practice for temporary

electrical systems for entertainment and related

purposes

CPW/4 current

BS 5577:1999 Specification for table cutlery with non-metallic handles

CW/17 confirmed (2011)


of 148 January 2016

BS

6748:1986+A1:2011

Specification for limits of metal

release from ceramic ware, glassware, glass ceramic ware and

vitreous enamel ware

CW/29 current Confirm

BS 4034:1990 Specification for vitrified hotelware CW/29 confirmed (2011) Reconfirm

BS 5416:1990 Specification for china tableware CW/29 confirmed (2011) Reconfirm

BS 3788:1984 Specification for tin coated finish

on culinary utensils

CW/9 confirmed (2011) Reconfirm

BS 7000-6:2005 Design management systems -- Managing inclusive design. Guide

DES/1 confirmed (2011) Reconfirm

BS 5760-8:1998 Reliability of systems, equipment

and components -- Guide to

assessment of reliability of systems containing software

DS/1 confirmed (2011)

PD 6663:2000 Guidelines to BS EN 12973. Value management. Practical guidance to

its use and intent

DS/1 confirmed (2011) Reconfirm

BS 2045:1965 Preferred numbers E/- confirmed (2011) Withdraw

BS 2742M:1960 Miniature smoke chart EH/2/1 confirmed (2011)

BS 2742C:1957 Ringelmann chart EH/2/1 confirmed (2011) Reconfirm

BS 6068-2.18:1986 Water quality. Physical, chemical and biochemical methods --

Methods for the determination of easily liberatable cyanide

EH/3/2 confirmed (2011) Reconfirm

BS 6068-2.34:1988 Water quality. Physical, chemical and biochemical methods --

Method for the determination of

the chemical oxygen demand


BS 6068-2.17:1986 Water quality. Physical, chemical

and biochemical methods -- Methods for determination of total

cyanide


BS 667:2005 Illuminance meters. Requirements and test methods

EL/1 confirmed (2011) Reconfirm

BS 7920:2005 Luminance meters. Requirements

and test methods

EL/1 confirmed (2011) Reconfirm

BS 8456:2005 Code of practice for design and installation of directional sounder

evacuation systems

EL/1/1 confirmed (2011) Withdraw

BS 7827:2011 Code of practice for designing, specifying, maintaining and

operating emergency sound

systems at sports venues

EPL/100 current Confirm

BS 6513-5:1987 Wideband cabled distribution

systems -- Recommendations for one-way and interactive data

services

EPL/100 confirmed (2011) Reconfirm

BS 7594:2011 Code of practice for audio-

frequency induction-loop systems

(AFILS)

EPL/100 current


systems -- Methods of

measurement



systems -- Glossary of terms



of 148 January 2016

PD 60065:2001 Interpretation sheets for BS EN

60065:1998. Audio, video and similar electronic apparatus. Safety

requirements

EPL/108 replaced by BS EN

60065:2002+A12:2011

Confirm

BS 7580-2:1997 Specification for the verification of

sound level meters -- Shortened procedure for type 2 sound level

meters


BS 3539:1986 Specification for sound level meters

for the measurement of noise

emitted by motor vehicles


BS 7580-1:1997 Specification for the verification of

sound level meters -- Comprehensive procedure


PD 6545:2005 Intended use of human head and

ear simulators-guide


BS 9074 N007:1978 Detail specification for fixed polystyrene film dielectric extended

foil capacitors. Rectangular non-

metallic case, unidirectional terminations. Full plus additional

assessment level

EPL/40X replaced by BS 9074 N007:1981, due to

existing approvals

Withdraw

BS 9070-3:1970 Specification for fixed capacitors of assessed quality: generic data and

methods of test -- Tantalum electrolytic capacitors

EPL/40X replaced by BS CECC 30800:1978, due to

existing approvals

BS 9121:1988 Blank detail specification for radio interference suppression filters of

assessed quality. Basic and full assessment levels

EPL/40X partially replaced by BS EN 133000:1997

BS 9120:1988 Specification for radio interference suppression filters of assessed

quality: generic data and methods

of test

EPL/40X partially replaced by BS EN 133000:1997

BS 9210 N0009-

1:1978

Detail specification for radio

frequency connectors (series SMC) -- Full assessment level


BS 9210:1984 Specification for radio frequency

connectors of assessed quality: generic data and methods of test

EPL/46 replaced by BS CECC

22000:1980 due to existing approvals

Confirm

BS 9210 N007-1:1976 Detail specification for radio frequency connectors (type SMB) --

Full assessment level

EPL/46 confirmed (2011)

BS 9220:1971 Specification for rigid waveguide tubing of assessed quality: generic

data and methods of test


BS 4319-1:1968 Methods of measurement of the electrical properties of electronic

tubes and valves (excluding microwave devices) -- Essential

conditions for measuring equivalent

input and output admittances


BS 4478:1969 Methods of measurement of

intermodulation products in

electronic tubes or valves intended for use in colour television

transposers



of 148 January 2016

BS 448-2:1981 Dimensions of electronic tubes and

valves -- Specification for dimensions of United Kingdom

electronic tubes


BS 4789:1972 Specification for ceramic components for use in envelopes

for electronic tubes


BS 6600-10:1985 Outline dimensions of transformers

and inductors for use in

telecommunication and electronic equipment -- Specification for the

outline dimensions of transformers and inductors using the Q range of

C-cores


BS 6600-1:1987 Outline dimensions of transformers

and inductors for use in

telecommunication and electronic equipment -- Specification for the

outline dimensions of transformers and inductors using YEI-1

laminations


BS 9751 N0001:1980 Detail specification for fixed insulated (unshielded) radio

frequency inductors. Wire wound on ferrite, iron dust or phenolic

cylindrical former. Full assessment

level


BS 5347:1976 Specification for silicon-iron strip-

wound cores for use in

transformers and inductors for telecommunications and electronic

equipment


BS 9753:1986 Sectional specification for variable

r.f. type inductors of assessed

quality for use in electronic equipment for capability approval


BS 9721:1985 Sectional specification for signal transformers of assessed quality

for use in electronic equipment for capability approval


BS 9727:1985 Sectional specification for power transformers of assessed quality

for use in electronic equipment for

capability approval


BS 9733:1985 Sectional specification for pulse

transformers of assessed quality for use in electronic equipment for

capability approval


BS 9734:1978 Sectional specification for pulse

transformers of assessed quality for use in electronic equipment: full

assessment level


BS 9741:1986 Sectional specification for inductors

of assessed quality for use in electronic equipment for capability

approval



of 148 January 2016

BS 9751:1979 Blank detail specification for fixed

insulated (unshielded) r.f. inductors at the full assessment level


BS 2857:1976 Specification for nickel-iron

transformer and choke laminations


BS 4309:1968 Methods of measuring the performance of laboratory electric

resistance furnaces


BS 2648:1955 Performance requirements for electrically-heated laboratory

drying ovens


BS 3224-1:1988 Lighting fittings for civil land

aerodromes -- Specification for

lighting units for use in precision approach path indicator systems


BS 3224-4:1988 Lighting fittings for civil land aerodromes -- Specification for

elevated lighting units


BS 3224-6:1988 Lighting fittings for civil land aerodromes -- Specification for

obstacle lighting units


BS 4168-1:1981 Hexagon socket screws and wrench

keys: metric series -- Specification

for hexagon socket head cap screws

FME/9 replaced by BS EN ISO

4762:1998

BS 7371-

6:1998+A1:2011

Coatings on metal fasteners --

Specification for hot dipped galvanized coatings

FME/9 current Confirm

BS 3673-4:1977 Specification for spring retaining rings -- Carbon steel circlips -

metric series

FME/9 confirmed (2011)

BS 7371-8:2011 Coatings on metal fasteners -- Specification for sherardized

coatings

FME/9 current Confirm

BS 3673-2:1965 Specification for spring retaining rings -- Carbon steel E clips

FME/9 confirmed (2011) Withdraw

BS 3673-3:1968 Specification for spring retaining

rings -- Carbon steel C clips

FME/9 confirmed (2011) Withdraw

BS 4895:1981 Specification for semi-tubular rivets

for general purpose use

FME/9 confirmed (2011) Reconfirm

BS 8572:2011 Procurement of facility-related services. Guide

FMW/1 current Confirm

BS 5839-9:2011 Fire detection and fire alarm

systems for buildings -- Code of

practice for the design, installation, commissioning and maintenance of

emergency voice communication systems

FSH/12/5 current

BS 5306-1:2006 Code of practice for fire

extinguishing installations and equipment on premises -- Hose

reels and foam inlets

FSH/14 confirmed (2011) Reconfirm

BS 6266:2011 Fire protection for electronic

equipment installations. Code of practice

FSH/14 current


of 148 January 2016

BS 5306-0:2011 Fire protection installations and

equipment on premises -- Guide for selection of installed systems and

other fire equipment

FSH/18 current

BS 9252:2011 Components for residential

sprinkler systems. Specification and test methods for residential

sprinklers

FSH/18/2 current

BS 7944:1999 Type 1 heavy duty fire blankets and type 2 heavy duty heat

protective blankets


BS 7867:1997 Specification for portable fire extinguishers for use in aircraft


BS 476-7:1997 Fire tests on building materials and

structures -- Method of test to determine the classification of the

surface spread of flame of products



structures -- Methods for

determination of the contribution of components to the fire

resistance of a structure


BS 476-21:1987 Fire tests on building materials and structures -- Methods for

determination of the fire resistance

of loadbearing elements of construction


BS 476-31.1:1983 Fire tests on building materials and

structures -- Method of measurement under ambient

temperature conditions


PD 7974-6:2004 The application of fire safety

engineering priciples to fire safety design of buildings -- Human

factors. Life safety strategies. Occupant evacuation, behaviour

and condition (Sub-system 6)


PD 7974-1:2003 Application of fire safety engineering principles to the design

of buildings -- Initiation and

development of fire within the enclosure of origin (Sub-system 1)


PD 7974-4:2003 Application of fire safety

engineering principles to the design of buildings -- Detection of fire and

activation of fire protection

systems. (Sub-system 4)



engineering principles to the design of buildings -- Structural response

and fire spread beyond the

enclosure of origin

FSH/24 current Confirm


engineering principles to the design

of buildings -- Guide to design framework and fire safety

engineering procedures

FSH/24 confirmed (2011)

BS 4422:2005 Fire. Vocabulary FSH/9 confirmed (2011)


of 148 January 2016

BS 4875-7:2006 Strength and stability of furniture --

Domestic and contract storage furniture. Performance

requirements

FW/0/2 confirmed (2011)

BS 8480:2006 Medical devices. Chairs with electrically operated support

surfaces. Requirements

FW/0/2 current

BS

8509:2008+A1:2011

Childrens beds for domestic use.

Safety requirements and test

methods

FW/0/2 current Confirm

BS 6807:2006 Methods of test for assessment of

ignitability of mattresses,

upholstered divans and upholstered bed bases with flaming types of

primary and secondary sources of ignition

FW/6 confirmed (2011)

BS 5852-1:1979 Fire tests for furniture -- Methods

of test for the ignitability by smokers' materials of upholstered

composites for seating


BS 5852-2:1982 Fire tests for furniture -- Methods

of test for the ignitability of upholstered composites for seating

by flaming sources

FW/6 confirmed (2011) Reconfirm

BS

7176:2007+A1:2011

Specification for resistance to

ignition of upholstered furniture for

non-domestic seating by testing composites

FW/6 current

BS 5852:2006 Methods of test for assessment of the ignitability of upholstered

seating by smouldering and flaming ignition sources


BS 7177:2008+A1:2011

Specification for resistance to ignition of mattresses, mattress

pads, divans and bed bases

FW/6 current

BS 10500:2011 Specification for an anti-bribery management system (ABMS)

G/3 current

BS 4727-2:Group

12:1990

Glossary of electrotechnical, power,

telecommunication, electronics, lighting and colour terms. Terms

particular to power engineering --

Telecontrol terminology

GEL/1 confirmed (2011) Reconfirm

BS 2572:1990 Specification for phenolic laminated sheet and epoxy cotton fabric

laminated sheet

GEL/15 partially replaced by BS EN 60893-3-4:1995

BS 3953:1990 Specification for synthetic resin bonded woven glass fabric

laminated sheet

GEL/15 partially replaced by BS EN 60893-2:1995,

BS EN 60893-3-3:1995, BS EN 60893-

3-6:1995 and BS EN

60893-3-7:1995

Confirm

PD 2379:2005 Register of colours of

manufacturers' identification threads for electric cables and

cords. Tenth Edition

GEL/20 confirmed (2011)


of 148 January 2016

BS 7870-3.12:2011 LV and MV polymeric insulated

cables for use by distribution and generation utilities -- Specification

for distribution cables of rated voltage 0.6/1 kV. XLPE insulated

combined neutral and earth copper

wire concentric cables with copper or aluminium conductors, having

low emission of smoke and corrosive gases when affected by

fire

GEL/20/16 current Confirm

BS 7870-3.50:2011 LV and MV polymeric insulated cables for use by distribution and

generation utilities -- Specification for distribution cables of rated

voltage 0.6/1 kV. XLPE insulated,

copper wire waveform or helical concentric cables with solid

aluminium conductors, having low emission of smoke and corrosive

gases when affected by fire

GEL/20/16 current



voltage 0.6/1 kV. XLPE insulated

split concentric cables with copper or aluminium conductors, having

low emission of smoke and corrosive gases when affected by

fire




voltage 0.6/1 kV. XLPE insulated

combined neutral and earth copper wire concentric cables with copper

or aluminium conductors




voltage 0.6/1 kV. XLPE insulated, copper wire waveform concentric

cables with solid aluminium

conductors



cables for use by distribution and

generation utilities -- Specification for distribution cables with

extruded insulation for rated voltages of 11 kV and 33 kV.

Single-core 33 kV lead sheathed

cables



of 148 January 2016



for distribution cables of rated voltage 0.6/1 kV. XLPE insulated

split concentric cables with copper

or aluminium conductors




for distribution cables with

extruded insulation of rated voltages of 11 kV to 33 kV. Single-

core 11 kV to 33 kV cables



generation utilities -- Specification for distribution cables with

extruded insulation for rated

voltages of 11 kV to 33 kV. Three-core 11 kV cables


BS 7870-5:2011 LV and MV polymeric insulated cables for use by distribution and

generation utilities -- Polymeric

insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for

overhead distribution


BS 7870-2:2011 LV and MV polymeric insulated cables for use by distribution and

generation utilities -- Methods of test


BS 7870-1:2011 LV and MV polymeric insulated

cables for use by distribution and generation utilities -- General


BS 8436:2011 Electric cables. Specification for

300/500 V screened electric cables having low emission of smoke and

corrosive gases when affected by fire, for use in walls, partitions and

building voids. Multicore cables


BS 7917:1999 Elastomer insulated fire resistant (limited circuit integrity) cables for

fixed wiring in ships and on mobile and fixed offshore units.

Requirements and test methods

GEL/20/6 confirmed (2011) Reconfirm

BS 6883:1999 Elastomer insulated cables for fixed

wiring in ships and on mobile and fixed offshore units. Requirements

and test methods

GEL/20/6 confirmed (2011) Reconfirm

BS 8435:2005 Small craft. Reserve flotation.

Boats up to six metres length of hull

GME/33 confirmed (2011)

BS 5809:1980 Specification for safety and

efficiency of the gas heating equipment of commercial

dishwashing machines

GSE/19 confirmed (2011) Reconfirm


of 148 January 2016

BS 1179-6:1980 Glossary of terms used in the gas

industry -- Combustion and utilization including installation at

consumers' premises


BS 5991:2006 Specification for indirect gas fired

forced convection air heaters with rated heat inputs greater than 330

kW but not exceeding 2 MW for

industrial and commercial space heating. Safety and performance

requirements (excluding electrical requirements) (2nd family gases)

GSE/20/4 confirmed (2011) Reconfirm

BS 5990:2006 Specification for direct gas-fired

forced convection air heaters with

rated heat inputs greater than 330 kW but not exceeding 2 MW for

industrial and commercial space heating. Safety and performance


GSE/20/4 confirmed (2011) Reconfirm

BS 7461:1991 Specification for electrically operated automatic gas shut-off

valves fitted with throughput adjusters, proof of closure

switches, closed position indicator switches or gas flow control


BS 6047-1:1981 Flame supervision devices for

domestic, commercial and catering gas appliances -- Specification for

heat sensitive type


BS 5986:1980 Specification for electrical safety

and performance of gas fired space

heating appliances with inputs 60 kW to 2 MW


BS 1552:1995 Specification for open bottomed taper plug valves for 1st, 2nd and

3rd family gases up to 200 mbar


BS 7462:1991 Specification for electrical safety of

domestic gas appliances


BS 2977:1958 Domestic lighting appliances for

use with liquefied petroleum gases


BS 8660-1:2011 Gas-fired micro-cogeneration appliances of rated thermal input

not exceeding 70 kW net --

Specification for selection, installation, inspection,

commissioning, servicing and maintenance of Stirling engine

micro-cogeneration appliances

GSE/30 current Confirm

BS 6400-2:2006 Specification for installation, exchange, relocation and removal

of gas meters with a maximum capacity not exceeding 6 m$u3/h --

Medium pressure (2nd family

gases)

GSE/30 confirmed (2011)


of 148 January 2016

BS 6644:2011 Specification for the installation

and maintenance of gas-fired hot water boilers of rated inputs

between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases)

GSE/30 current

BS 6896:2011 Specification for installation and

maintenance of gas-fired overhead

radiant heaters for industrial and commercial heating (2nd and 3rd

family gases)

GSE/30 current Confirm

BS 6230:2011 Specification for installation of gas-fired forced convection air heaters

for commercial and industrial space

heating (2nd and 3rd family gases)

GSE/30 current

BS 7624:2004 Installation and maintenance of

domestic direct gas-fired tumble dryers of up to 6 kW heat input

(2nd and 3rd family gases). Specification

GSE/30/-/20 confirmed (2011) Reconfirm

BS 715:2005 Specification for metal flue boxes

for gas-fired appliances not exceeding 20 kW


BS 669-2:1997 Flexible hoses, end fittings and

sockets for gas burning appliances -- Specification for corrugated

metallic flexible hoses, covers, end fittings and sockets for catering

appliances burning 1st, 2nd and

3rd family gases


BS 7872:2011 Manned security services. Cash and

valuables in transit services (collection and delivery). Code of

practice

GW/3 current Reconfirm

BS 8484:2011 Provision of lone worker device

(LWD) services. Code of practice

GW/3 current

BS 8523:2011 Management and operation of

warden schemes. Code of practice

GW/3 current

BS 8549:2006 Security consultancy. Code of practice

GW/3 confirmed (2011)

BS 1523-1:1967 Glossary of terms used in

automatic controlling and regulating systems -- Process and

kinetic control

I/- confirmed (2011) Withdraw

BS 4783-8:1994 Storage, transportation and maintenance of media for use in

data processing and information storage -- Recommendations for 4

mm and 8 mm helical scan tape

cartridges

ICT/-/1 confirmed (2011) Reconfirm

BS 6475:1984 Specification for processor system

bus interface (Eurobus A)

ICT/-/1 confirmed (2011) Reconfirm

BS 6660-1:2005 Guide to setting up and

maintaining micrographics and digital imaging units --

Micrographics

IDT/1 confirmed (2011) Reconfirm

BS 5261-1:2000 Copy preparation and proof correction -- Design and layout of

documents

IDT/2 confirmed (2011) Reconfirm


of 148 January 2016

BS 8538:2011 Specification for the provision of

services relating to the commercialization of intellectual

property rights

IMS/1/1 current Confirm

BS 4633 and

4634:1970


crystallizing point. Method for the determination of melting point

and/or melting range

ISE/102 confirmed (2011)

BS 5443:1977 Recommendations for a standard

layout for methods of chemical

analysis by gas chromatography

ISE/102 confirmed (2011) Reconfirm

BS 2511:1970 Methods for the determination of

water (Karl Fischer method)


BS 4-1:2005 Structural steel sections --

Specification for hot-rolled sections


PD 970:2005 Wrought steels for mechanical and allied engineering purposes.

Requirements for carbon, carbon manganese and alloy hot worked

or cold finished steels


PD 6635:1999 Non-alloy steel rod for drawing

and/or cold rolling. General purpose rod, rimmed and rimmed

substitute low carbon steel rod, rod for special applications.

Requirements and tests


BS 4087:1989 Specification for copper-covered steel wire for telephone and

telegraph purposes


BS 4637:1970 Specification for carbon steel wire for coiled springs (bedding and

seating)


BS 1429:1980 Specification for annealed round steel wire for general engineering

springs


BS 182:1972 Specification for galvanized line-

wire for telephone and telegraph

purposes


BS 4638:1970 Specification for carbon steel wire

for zigzag and square-form springs


BS 1052:1980 Specification for mild steel wire for

general engineering purposes


BS 7612:1993 Specification for non-circular steel wire for mechanical springs


BS 183:1972 Specification for general purpose

galvanized steel wire strand


BS 4102:1998 Specification for steel wire for

general fencing purposes


BS 2453:1973 Specification for steel wire for spokes


BS 3604-2:1991 Steel pipes and tubes for pressure

purposes: ferritic alloy steel with specified elevated temperature

properties. -- Specification for longitudinally arc welded tubes



of 148 January 2016

BS 5383:1986 Specification for material

identification of steel, nickel alloy and titanium alloy tubes by

continuous character marking and colour coding of steel tubes


PD 6525-1:1990 Elevated temperature properties

for steels for pressure purposes. --

Stress rupture properties


BS 6582:2000 Continuously hot-dip lead alloy

(terne) coated cold reduced carbon

steel flat rolled products


BS 1640-1:1962 Specification for steel butt-welding

pipe fittings for the petroleum industry -- Wrought carbon and

ferritic alloy steel fittings

ISE/110 partially replaced by

BS EN 10253-2:2007

Reconfirm

PD 6484:1979 Commentary on corrosion at

bimetallic contacts and its

alleviation

ISE/NFE/8 confirmed (2011) Reconfirm

BS 8440-2:2005 Health informatics. Medical digital

imaging. Profiles format --

Particular requirements for metadata profiles

IST/35 confirmed (2011)

BS 8441-2:2006 Health informatics. Medical digital imaging profiles -- “M-IHE6-

4.8MIS-CT” CT images stored


BS 8440-1:2005 Health informatics. Medical digital imaging. Profiles format -- General

principles


BS 8419-2:2005 Interoperability between metadata systems used for learning,

education and training -- Code of practice for the development of

interoperability between application

profiles


BS 8419-1:2005 Interoperability between metadata

systems used for learning,

education and training -- Code of practice for the development of

application profiles


PD 7506:2005 Linking knowledge management with other organizational functions

and disciplines. A guide to good

practice

KMS/1 confirmed (2011) Reconfirm

PD 7504:2005 Knowledge management in the

public sector. A guide to good

practice


PD 7501:2003 Managing culture and knowledge.

Guide to good practice


PD 7505:2005 Skills for knowledge working. A

guide to good practice


PD 7503:2003 Introduction to knowledge management in construction


PD 7502:2003 Guide to measurements in

knowledge management


PD 7500:2003 Knowledge Management.

Vocabulary



of 148 January 2016

BS 6940-2:1989 Total Access Communication

System (T.A.C.S) -- Specification for performance and tests of the

signalling system of mobile stations

L/-/99 confirmed (2011) Withdraw

BS 6940-1:1989 Total Access Communication

System (T.A.C.S) -- Specification for performance requirements for

mobile stations


BS 1117-2:1964 Specification for bare fine

resistance wire for precision

electrical equipment -- Metric units


BS 3467:1962 Method of test for temperature

coefficient of resistance of alloy wire for precision resistors


BS 3466:1962 Methods of test for resistance per

unit length of metallic electrical resistance material


BS 115:1995 Specification for metallic resistance

materials for electrical purposes


BS 4462:1969 Guide for the preparation of technical sales literature for

measuring instruments and process

control equipment

LBI/1/2 confirmed (2011)

BS 2649-3:1988 Methods for analysis of glass --

Glasses of the potassium oxide-lead oxide-silica type

LBI/1/2 confirmed (2011) Withdraw

BS 2649-1:1988 Methods for analysis of glass -- Glasses of the soda-lime-magnesia-

silica type


BS 1922:1987+A2:2011

Specification for glass dispensing measures for pharmaceutical

purposes

LBI/1/2 current Confirm

BS 5404-2:1977 Specification for plastics laboratory ware -- Graduated measuring

cylinders


BS 5404-3:1977 Specification for plastics laboratory ware -- Filter funnels


BS 894:1956 Specification for Ubbelohde

apparatus for flow and drop points

LBI/1/2 confirmed (2011) Reconfirm

BS 5404-4:1979 Specification for plastics laboratory

ware -- Wash bottles


BS 572:1985 Specification for interchangeable conical ground glass joints


BS 3108:1980 Specification for limestone for

making colourless glasses


BS 5404-1:1976 Specification for plastics laboratory

ware -- Beakers


BS 6706:1986 Specification for disposable glass serological pipettes


BS 5732:1985 Specification for glass disposable

Pasteur pipettes


BS 2701:1956 Specification for Rees-Hugill

powder density flask


BS 3447:1962 Glossary of terms used in the glass industry



of 148 January 2016

BS 2761:1983 Specification for spherical ground

joints


BS 2461:1983 Specification for gas washing bottles


BS 1132:1987 Specification for automatic pipettes LBI/1/2 confirmed (2011) Reconfirm

BS 4791:1985 Specification for calorimeter bombs LBI/1/2 confirmed (2011)

BS 2735:1956 Specification for iodine flasks LBI/1/2 confirmed (2011)

BS 4116-4:1992 Conveyor chains, their attachments

and associated chain wheels. -- Specification for chains and

attachments (British series)

MCE/1 confirmed (2011) Reconfirm

BS 3790:2006 Specification for belt drives.

Endless wedge belts, endless V-

belts, banded wedge belts, banded V-belts and their corresponding

pulleys


BS 4548:1987 Specification for synchronous belt drives for industrial applications

MCE/10 replaced by BS ISO 5296:2012

BS 3733:1974 Specification for endless V-belt

drives for agricultural purposes


BS 5540-6:1990 Evaluating particulate contamination of hydraulic fluids --

Method of calibrating liquid

automatic particle-count instruments (using mono-sized

latex spheres)


BS 6005:1997 Specification for moulded transparent polycarbonate bowls

used in compressed air filters and lubricators


BS 6361:1988 Specification for three-pin plug

connectors for electrically controlled fluid power equipment


BS 7993:2011 Twin ferrule connectors and

associated tubing for 316 stainless steel systems. Specification and

test methods

MCE/18/-/4 current

BS 978-2:Addendum

No. 1:1959

Gears for instruments and

clockwork mechanisms. Cycloidal type gears. -- Double circular arc

type gears

MCE/5 confirmed (2011)

BS 2007:1975 Specification for circular gear shaving cutters, 1 to 8 metric

module, accuracy requirements


BS 2062-2:1960 Specification for gear hobs -- Hobs for gears for turbine reduction and

similar drives

MCE/5 replaced by BS 5221:1975, until

international agreement is reached

on tolerances

Confirm

BS 2062-1:1959 Specification for gear hobs -- Hobs

for general purposes, 1 d.p. to 20 d.p. inclusive

MCE/5 replaced by BS

5221:1975, until international

agreement is reached on tolerances

Confirm

BS 5246:1976 Specification for pinion type cutters

for spur gears - 1 to 8 metric

module



of 148 January 2016

BS 2518-1:1954 Specification for rotary form

relieved gear cutters -- Diametral pitch


BS 4582-2:1978 Specification for fine pitch gears

(metric module) -- Hobs and cutters


BS 978-1:1968 Specification for fine pitch gears. -- Involute spur and helical gears


BS 2518-2:1977 Specification for rotary form relieved gear cutters -- Metric

module


BS 6710:1987 Specification for dimensions of

chain wheel tooth forming tools


BS 978-2:1952 Specification for fine pitch gears --

Cycloidal type gears


BS 2697:1976 Specification for rack type gear cutters, metric module


BS 978-3:1952 Specification for fine pitch gears --

Bevel gears


BS 721-1:1963 Specification for worm gearing --

Imperial units


BS 721-2:1983 Specification for worm gearing -- Metric units


BS 6168:1987 Specification for non-metallic spur

gears


BS 4082-1:1969 Specification for external

dimensions for vertical in-line centrifugal pumps -- 'I' Type


BS 4082-2:1969 Specification for external

dimensions for vertical in-line centrifugal pumps -- 'U' Type


BS 5257:1975 Specification for horizontal end-

suction centrifugal pumps (16 bar)


BS 4278:1984 Specification for eyebolts for lifting purposes

MHE/1 replaced by BS EN ISO 3266:2010 and has

been declared obsolescent

Confirm

BS 6451:1984 Specification for netting and fibre rope load restraint systems in

surface transport

MHE/16 confirmed (2011) Reconfirm

BS 6756:1986 Specification for fibre rope cargo nets


BS 2573-1:1983 Rules for the design of cranes --

Specification for classification, stress calculations and design

criteria for structures

MHE/3 replaced by BS EN

13001-1:2004+A1:2009, BS

EN 13001-2:2014, BS EN 13001-3-

1:2012+A1:2013, BS

EN 13001-3-2, BS EN 13001-3-3, BS EN

13001-3-4 and DD CEN/TS 13001-3-

5:2010

Confirm


of 148 January 2016

BS 2573-2:1980 Rules for the design of cranes --

Specification for classification, stress calculations and design of

mechanisms


13001-1:2004+A1:2009, BS

EN 13001-2:2014, BS EN 13001-3-

1:2012+A1:2013, BS

EN 13001-3-2, BS EN 13001-3-3, BS EN

13001-3-4 and DD CEN/TS 13001-3-

5:2010

Confirm

BS 5744:1979 Code of practice for safe use of

cranes (overhead/underhung travelling and goliath cranes, high

pedestal and portal jib dockside cranes, manually-operated and

light cranes, container handling cranes and rail-mounted low

carriage cranes)

MHE/3/11 partially replaced by

Parts 1 to 3 of BS 7121. When all parts

of BS 7121 have been published BS 5744 will

be revised to cover manually operated and

light cranes only

Confirm

BS 7121-14:2005 Code of practice for safe use of

cranes -- Side boom pipelayers

MHE/3/11 confirmed (2011) Reconfirm

BS 7121-5:2006 Code of practice for safe use of cranes -- Tower cranes

MHE/3/11 confirmed (2011) Reconfirm

BS 8486-

2:2007+A1:2011

Examination and test of new lifts

before putting into service.

Specification for means of determining compliance with BS EN

81 -- Hydraulic lifts

MHE/4 current

BS 8486-1:2007+A1:2011

Examination and test of new lifts before putting into service.

Specification for means of

determining compliance with BS EN 81 -- Electric lifts

MHE/4 current

BS 6440:2011 Powered vertical lifting platforms

having non-enclosed or partially enclosed liftways intended for use

by persons with impaired mobility.

Specification

MHE/4 current

BS 5655-6:2011 Lifts and service lifts -- Code of practice for the selection,

installation and location of new lifts

MHE/4 current

BS 7801:2011 Escalators and moving walks. Code of practice for safe working on

escalators and moving walks

MHE/4 current Confirm

BS 4430-2:1969 Recommendations for the safety of powered industrial trucks --

Operation and maintenance

MHE/7 confirmed (2011)

BS 8439:2005 Continuous handling equipment

and systems. Guide to properties of

powders and bulk materials


BS 8905:2011 Framework for the assessment of

the sustainable use of materials.

Guidance

MI/1 current


of 148 January 2016

BS 3876-2:1990 Rope rollers, pulleys, mountings

and assemblies for colliery track haulage -- Specification for vertical

spindle pulleys, mountings and assemblies

MRE/1 confirmed (2011) Reconfirm


and assemblies for colliery track haulage -- Specification for parallel

barrel rollers, mountings and assemblies



and assemblies for colliery track haulage -- Specification for

suspended pulley assemblies and

clamps


BS 6680:1985 Specification for flameproof

equipment for diesel engines for

use in coal mines and other mines susceptible to firedamp


BS 5620:1995 Specification for 200 A 1100 V

flameproof restrained and bolted

plugs and sockets for use in coal mines


BS 1090:1970 Specification for flameproof hand-held electric drilling machines

primarily for use in mines


BS 4878:1973 Specification for large (vee-throated) haulage rope pulleys for

mines and quarries


BS 2593:1974 Specification for rotary drill rods

and tungsten carbide tipped rotary

drill bits


BS 3237:1960 Specification for light and medium

rolling stock for mineral haulage in

mines


BS 4073:1966 Specification for heavy rolling stock

for mineral haulage in mines


BS 3618-7:1973 Glossary of mining terms --

Electrical engineering and lighting


BS 3618-9:1974 Glossary of mining terms -- Shafts and associated equipment


BS 248:1969 Specification for light rails and

fishplates for use at mines


BS 227:1995 Specification for H-section steel

arches for use in mines


BS 3618-1:1969 Glossary of mining terms -- Planning and surveying


BS 3618-3:1971 Glossary of mining terms -- Boring

and exploration


BS 3618-6:1972 Glossary of mining terms -- Drilling

and blasting


BS 3618-8:1974 Glossary of mining terms -- Winning and working


BS 3618-11:1967 Glossary of mining terms -- Strata

control


BS 4854:1972 Specification for cars for manriding

in mines



of 148 January 2016


Ventilation


BS 3618-10:1967 Glossary of mining terms -- Transport



Drainage



Geology


BS 6907-4:1988 Electrical installations for open-cast mines and quarries --

Recommendations for winning, stacking and processing machinery,

pumps and low signal level and

communications systems


BS 7383:1990 Specification for cold-pour resin-

based compound for use as a filling

medium in terminating cables in enclosures for voltages not

exceeding 11 kV for use in coal mines


BS 7019:1989 Specification for fully screened 400

A bolted flameproof cable couplers and adaptors for use on systems

up to and including 6.6 kV, primarily for use in mines


BS 787-2:1968 Specification for mining type

flameproof gate-end boxes -- Gate-

end boxes with air-break circuit-breakers (for use on 3-phase a.c.

circuits up to 650 volts)


BS 787-1:1969 Specification for mining type flameproof gate-end boxes -- Gate-

end boxes for direct-on-line motor

starting (for use on 3-phase a.c. circuits up to 650 V)


BS 5126-4:1993 Mining type flameproof supply and

control units for use on systems up to 1100 V -- Specification for air-

cooled transformers to power

drilling machines


BS 6709:1986 Specification for interconnection of electrical apparatus, constructed to

two or more British Standards, for use in mines susceptible to

firedamp


BS 6907-2:1988 Electrical installations for open-cast mines and quarries -- General

recommendations for protection

against direct contact and electric shock



flameproof gate-end boxes -- Gate-end boxes for drilling machines (for

use on 3-phase a.c. circuits up to

650 V)



of 148 January 2016


control units for use on systems up to 1100 V -- Specification for air-

cooled lighting transformer units


BS 3101:1986 Specification for control and

interlock circuits primarily associated with flameproof

restrained plugs and sockets for

use in coal mines



control units for use on systems up to 1100 V -- Specification for

direct-on-line motor starters


BS 7924:1999 Code of practice for the repair and

overhaul of certified electrical

apparatus intended for use in mines susceptible to firedamp


BS 7202:1989 Specification for non-incendive low voltage control/interlock and low

voltage earth fault monitoring circuits for use in mines


BS 5126-2:1993 Mining type flameproof supply and control units for use on systems up

to 1100 V -- Specification for circuit

breaker units


BS 6704:1996 Code of practice for selection,

installation and maintenance of intrinsically safe electrical

equipment in coal mines


BS 6907-3:1988 Electrical installations for open-cast

mines and quarries -- Recommendations for equipment

and ancillaries


BS 3905:1995 Specification for 3.8/6.6 kV, 300 A

bolted flameproof cable couplers and adaptors, for use in coal

mines.


BS 6705:1987 Specification for electrical measuring instruments for use on

intrinsically safe circuits in coal

mines


BS 5125:1990 Specification for 50 A 650 V

flameproof, restrained and bolted plugs and sockets for use in coal

mines



flameproof gate-end boxes -- Gate-

end boxes with lighting transformers


BS 6182-1:1994 Intriniscally safe power supplies for

use in coal mines -- Specification for d.c. power supplies


BS 6182-2:1982 Intrinsically safe power supplies for

use in coal mines -- Specification for a.c. power supplies



of 148 January 2016

BS 6907-5:1988 Electrical installations for open-cast

mines and quarries -- Recommendations for operation


BS 6556-2:1985 Low speed digital signals for use in

coal mines -- Specification for transformer coupling


BS 6556-1:1985 Low speed digital signals for use in coal mines. -- Specification for

optical coupling


BS 6556-3:1985 Low speed digital signals for use in coal mines -- Specification for

message protocols


BS 5754:1987 Specification for electrical analogue and state signals for use in coal

mines


BS 6353:1983 Specification for underground loudspeaker communication

systems in coal mines


BS 6907-1:1988 Electrical installations for open-cast mines and quarries -- Glossary


BS 5067:1985 Specification for flameproof

transformers for use in mines


BS 6708:1998 Flexible cables for use at mines and quarries


BS 3138:1992 Glossary of terms used in management services

MS/1 confirmed (2011) Reconfirm

BS 3641-2:1980 Symbols for machine tools --

Specification for numerical control symbols

MTE/1 confirmed (2011) Reconfirm

PD 6490:1980 Guide to application of additional

symbols (and index) for machine tools


BS 3766:1979 Specification for coolant pumps for

machine tools


BS 4656-9:1974 Accuracy of machine tools and methods of test -- External

cylindrical grinding machines with reciprocating table

MTE/1/2 confirmed (2011) Reconfirm

BS 7794:1995 Specification for square-drive sockets, driving squares and

accessories for power-driven socket

wrenches


BS 2090:1954 Specification for hook spanners,

peg spanners, coupling wrenches and the related slots, holes and

horns


BS 6101-6:1990 Machine tool ball screws -- Specification for ball nuts and

principal dimensions of ball screws


BS 3087-10:1991 Pliers and nippers -- Specification

for dimensions of tools not

standardized by ISO


BS 3159-2:1993 Woodworking saws for hand use --

Specification for tenon and dovetail

saws



of 148 January 2016

BS 4006:1992 Specification for hand operated

square drive socket wrenches and accessories


BS 1842:1952 Specification for double-ended

open-jawed spanners for B.A. hexagon sizes


BS 1937:1953 Specification for engineers' ratchet braces and drilling pillars


BS 3159-1:1999 Woodworking saws for hand use -- Specification for hand saws


BS 3054:1959 Specification for fireman's axe with

rubber insulated handle


BS 3594-2:1965 Specification for pipe wrenches -- Footprint type wrenches


BS 3594-1:1963 Specification for pipe wrenches -- Stillson type wrenches


BS 2559:1994 Specification for screwdrivers and

screwdriver accessories


BS 2559-3:1973 Specification for screwdrivers -- Insulated screwdrivers


BS 3066:1995 Specification for engineers' cold chisels and allied tools


BS 3388:2004 Forks, shovels and spades.



BS 3823:1990 Grading of ash and hickory wood handles for hand tools


BS 3123:1959 Specification for spring calipers and spring dividers


BS 1421:1995 Specification for picks, beater picks

and mattocks


BS 3623:1981 Specification for woodworkers' metal-bodied planes


BS 1943:1989 Specification for woodworking chisels and gouges


BS 3322:1981 Specification for carpenters'

squares and bevels


BS 2957:1958 Specification for fireman's axe with ash handle


BS 3087-1:1991 Pliers and nippers -- General introduction


BS 498:1990 Specification for rasps and

engineers' files


BS 5708:1979 Specification for pruner shears (secateurs)


BS 192-1:1996 Open-ended wrenches -- Metric and unified


BS 2556:1973 Specification for hand and breast

drills


BS 2589:1955 Specification for railway track spanners


BS 2054:1953 Specification for augers and auger bits


BS 2558:1954 Specification for tubular box

spanners


BS 7586:1992 Specification for combination wrenches



of 148 January 2016

BS 7398:1991 Specification for hand hacksaw

frames


BS 2945:1995 Specification for axes and hatchets MTE/15 confirmed (2011) Reconfirm

BS 2583:1955 Specification for podger spanners MTE/15 confirmed (2011) Reconfirm

BS 3555:1988 Specification for ring wrenches MTE/15 confirmed (2011) Reconfirm

BS 2558:Supplement

No. 1:1968

Metric sizes MTE/15 confirmed (2011) Reconfirm

BS 876:1995 Specification for hand hammers MTE/15 confirmed (2011) Reconfirm

BS 1978:1965 Specification for bit braces MTE/15 confirmed (2011) Reconfirm

BS 1660-3:1988 Machine tapers -- Specification for

turret sockets and reduction

sleeves with tapped ends for tools with Morse taper shanks


BS 1660-7:1988 Machine tapers -- Specification for extension adaptors with external

7/24 tapers for tools with Morse taper shanks


BS 949-2:1992 Screwing taps -- Specification for unified ground thread taps.

Manufacturing tolerances


BS 1813:1974 Specification for dimensions of conduit dies, diestocks and guides


BS 3088:1959 Specification for adjustable hand

reamers with inserted blades


BS 328-4:1983 Drills and reamers -- Specification

for dimensions of reamers


BS 1098-1:1967 Specification for jig bushes -- Inch units

MTE/18 the requirements for metric units in BS

1098:1967 prior to its re-numbering as BS

1098-1:1967 have

been replaced by BS 1098-2:1977

Confirm

BS 1919-1:1993 Hacksaw blades -- Specification for hand and machine hacksaw blades


BS 411:1969 Specification for circular saws for

woodworking and their attachment


BS 1919-2:1995 Hacksaw blades -- Specification for

cutting performance


BS 3877:1991 Specification for metal cutting bandsaw blades


BS 4411:1969 Specification for woodcutting

bandsaw blades


BS 6271:1982 Specification for miniature hacksaw

blades


BS 4078-1:1987 Powder actuated fixing systems -- Code of practice for safe use


BS 4078-2:1989 Powder actuated fixing systems --

Specification for tools


BS 4094-1:1966 Recommendation for data on

shielding from ionizing radiation -- Shielding from gamma radiation

NCE/2 current

BS 4094-2:1971 Recommendation for data on shielding from ionizing radiation --

Shielding from X-radiation

NCE/2 confirmed (2011) Reconfirm


of 148 January 2016

BS 4513:1969 Specification for lead bricks for

radiation shielding


BS 4975:1990 Specification for prestressed concrete pressure vessels for

nuclear engineering


BS 3338-13:1965 Methods for the sampling and analysis of tin and tin alloys --

Method for the determination of antimony in solders and white

metal bearing alloys (volumetric:

potassium bromate method)

NFE/27 confirmed (2011) Reconfirm

BS 3338-8:1961 Methods for the sampling and

analysis of tin and tin alloys -- Method for the determination of

bismuth in ingot tin, tin-lead

solders and white metal bearing alloys (photometric method)




iron in ingot tin, tin-lead solders and white metal bearing alloys

(photometric method)



Method for the determination of arsenic in ingot tin, solders and

white metal bearing alloys





copper and lead in white metal

bearing alloys (electrodeposition method)




aluminium in solders and white metal bearing alloys (photometric

method)



Method for the determination of cadmium in solders and white

metal bearing alloys (photometric

method)



analysis of tin and tin alloys --

Method for the determination of zinc in solders and white metal

bearing alloys (photometric method)



analysis of tin and tin alloys -- Method for the determination of tin

in white metal bearing alloys (nickel coil reduction method)



of 148 January 2016



lead in ingot tin and tin-antimony solders (photometric method)



analysis of tin and tin alloys --

Method for the determination of copper in ingot tin and tin-lead

solders (photometric method)




silver in solders (volumetric: ammonium thiocyanate method)




copper in high purity ingot tin




Method for the determination of tin in solders (nickel coil reduction

method)



Method for the determination of tin

in ingot tin (aluminium reduction method)




nickel in capping metal (photometric method)




antimony in ingot tin (photometric method)



analysis of tin and tin alloys -- Method for the sampling of white

metal bearing alloy ingots



analysis of tin and tin alloys -- Determination of high cadmium

content of soft solders


BS 4393:1991 Specification for solderable tin or

tin-lead coated wires for

component terminations


BS 61:1969 Specification for threads for light

gauge copper tubes and fittings


BS 6931:1988 Glossary of terms for copper and

copper alloys



of 148 January 2016

BS 3907-10:1969 Methods for the analysis of

magnesium and magnesium alloys -- Determination of manganese in

magnesium alloys containing zirconium, rare earths, thorium

and/or silver (photometric method)

NFE/35 confirmed (2011)

BS 3907-5:1966 Methods for the analysis of magnesium and magnesium alloys

-- Determination of manganese in magnesium and magnesium alloys

(photometric-periodate method)

(low contents)



magnesium and magnesium alloys

-- Determination of iron in magnesium and magnesium alloys

(photometric - 1:10-phenanthroline method)



magnesium and magnesium alloys -- Determination of manganese in

magnesium and magnesium alloys (photometric-periodate method)




-- Determination of lead in magnesium and magnesium alloys

(atomic absorption method)



-- Determination of aluminium in

magnesium and magnesium alloys (photometric method)



magnesium and magnesium alloys -- Determination of zirconium in





-- Determination of silicon in magnesium and magnesium alloys




magnesium and magnesium alloys -- Determination of zinc in

magnesium alloys (ion-exchange-volumetric EDTA method)



-- Determination of copper in magnesium and magnesium alloys




aluminium and aluminium alloys -- Determination of zinc (ion-

exchange-volumetric EDTA or



of 148 January 2016

polarographic method)


magnesium and magnesium alloys -- Determination of tin in





-- Determination of total rare earths in magnesium alloys

(gravimetric method)



magnesium and magnesium alloys -- Determination of aluminium in

magnesium alloys (gravimetric method)



aluminium and aluminium alloys --

Determination of silicon (absorptiometric molybdenum blue

method)


BS 1728-8:1957 Methods for the analysis of aluminium and aluminium alloys --

Determination of iron

(absorptiometric 1:10-phenanthroline method)



aluminium and aluminium alloys -- Determination of manganese

(volumetric: arsenite/nitrite

method)




-- Determination of nickel in magnesium alloys (photometric

method)




Determination of iron (volumetric: titanous chloride method)



Determination of magnesium (atomic absorption method)



Determination of manganese

(absorptiometric method)



aluminium and aluminium alloys -- Determination of magnesium

(volumetric CDTA method)



of 148 January 2016


aluminium and aluminium alloys -- Determination of silicon (perchloric

acid method)



aluminium and aluminium alloys -- Determination of lead (atomic

absorption method)




Determination of copper (absorptiometric method)



Determination of chromium (photometric method)



Determination of chromium (volumetric method)



Determination of nickel

(gravimetric method)



aluminium and aluminium alloys -- Determination of nickel




aluminium and aluminium alloys -- Copper (atomic absorption

method)



Nickel (atomic absorption method)



Zinc (atomic absorption method)



Determination of copper


BS 4574:1970 Recommendation for the

determination of the ink

absorbency of paper and board by use of K & N ink

PAI/11 confirmed (2011) Reconfirm

BS 6563:1985 Method for determination of the roughness of paper and board by

the Parker Print-surf apparatus


BS 4497:1969 Recommendations for the detection and estimation of nitrogenous

treating agents in paper


BS 4818:1993 Method for determination of the

creasing quality of carton board

(Pira method)



of 148 January 2016

BS 6504:1984 Method for determination of water

absorption of paper and board (Klemm method)


BS 4264:1987 Specification for envelopes for

commercial, official and professional use


BS 4816:1972 Method for the determination of the puncture resistance of board


BS 4896:1973 Method for the determination of ash of pulp


BS 6410:1991 Methods of test for filter papers PAI/11 confirmed (2011) Reconfirm

BS 5261-2:2005 Copy preparation and proof correction -- Specification for

typographic requirements, marks for copy preparation and proof

correction, proofing procedure


BS 5261C:2005 Copy preparation and proof

correction -- Marks for copy preparation and proof correction

(extracted from BS 5261-2:2005)


BS 159:1992 Specification for high-voltage

busbars and busbar connections

PEL/17/1 confirmed (2011) Reconfirm

BS 5000-3:2006 Rotating electrical machines of particular types or for particular

applications -- Generators to be

driven by reciprocating internal combustion engines. Requirements

for resistance to vibration

PEL/2 confirmed (2011) Reconfirm

BS 6121-5:2005 Mechanical cable glands -- Code of practice for selection, installation

and inspection of cable glands and armour glands


BS 6121-1:2005 Mechanical cable glands -- Armour glands. Requirements and test

methods


BS 8020:2011 Tools for live working. Specification for insulating hand tools for work

on or near conductor rail systems operating at voltages up to 1000 V

a.c. or 1500 V d.c.

PEL/78 current

BS 7194:1990 Specification for direct-current and

low-frequency electronic measuring instruments with a digital display


BS 5164:1975 Specification for indirect-acting

electrical indicating and recording instruments and their accessories


BS 90:1975 Specification for direct-acting electrical recording instruments

and their accessories


BS 3693:1992 Recommendations for design of scales and indexes on analogue

indicating instruments


BS 6366:2011 Specification for studs for rugby football boots

PH/3/11 current Confirm


of 148 January 2016

BS 8468-1:2006 Respiratory equipment for use

against chemical, biological, radiological and nuclear (CBRN)

agents -- Positive pressure, self-contained, open-circuit breathing

apparatus. Specification

PH/4 confirmed (2011) Reconfirm

BS 8468-3.2:2009 Respiratory protective devices for use against chemical, biological,

radiological and nuclear (CBRN) agents -- Air-purifying devices

incorporating a hood for escape.

Specification

PH/4 current Confirm

BS 8468-6.1:2011 Respiratory protective devices for

use against chemical, biological,

radiological and nuclear (CBRN) agents -- Positive-pressure

compressed airline equipment. Specification


BS 8468-6.2:2011 Respiratory protective devices for

use against chemical, biological, radiological and nuclear (CBRN)

agents -- Constant flow compressed airline equipment.

Specification


BS 8468-5:2011 Respiratory protective devices for use against chemical, biological,

radiological and nuclear (CBRN) agents -- Dual-mode apparatus.

Specification


BS 8478:2011 Respiratory protective devices.

Breathing gases for diving and hyperbaric applications.


PH/4/7 partially replaced by

BS EN 12021:2014

BS 8454:2006 Code of practice for the delivery of

training and education for work at height and rescue

PH/5 confirmed (2011)

BS 3238-1:1960 Graphical symbols for components

of servo-mechanisms -- Transductors and magnetic

amplifiers

PH/8/1 confirmed (2011)

BS 3238-2:1964 Graphical symbols for components of servo-mechanisms -- General

servo-mechanisms


BS 8501:2002 Graphical symbols and signs. Public information symbols


BS 1133-8:2011 Packaging code -- Guidance on

wooden boxes, cases and crates

PKW/0/-/11 current Reconfirm

BS 5168:1975 Glossary of rheological terms PRI/10 confirmed (2011) Reconfirm

BS 2782-0:2011 Methods of testing plastic --

Introduction

PRI/21 current


rubber -- EDTA titrimetric method for determination of zinc content of

rubber products

PRI/22 confirmed (2011) Reconfirm

BS 7164-11.2:1993 Chemical tests for raw and

vulcanized rubber. Butadiene rubber -- Method for determination



of 148 January 2016

of unsaturation

BS 903-5:2004 Physical testing of rubber -- Guide

to the application of rubber testing to finite element analysis


BS 903-A18:1973 Physical testing of rubber -- Determination of equilibrium water

vapour absorption

PRI/22 current Withdraw

BS 4370-2:1993 Methods of test for rigid cellular materials -- Methods 7 to 9

PRI/24 partially replaced by BS EN ISO 4590:1995

and BS ISO

1922:2001. Was withdrawn but has

been reinstated

Confirm

BS 2782-1:Method

140D:1997

Methods of testing plastics.

Thermal properties -- Flammability

of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting

(laboratory method)


BS 2782-1:Method 140E:1982

Methods of testing plastics. Thermal properties -- Flammability

of a small, inclined test piece

exposed to an alcohol flame (laboratory method)

PRI/26 confirmed (2011)

BS 7953:1999 Entrance flooring systems.

Selection, installation and maintenance


BS 5325:2001 Installation of textile floor coverings. Code of practice


BS 5808:1991 Specification for underlays for textile floor coverings

PRI/3 partially replaced by BS EN 14499:2004

Confirm

BS 2782-10:Method

1006:1978

Methods of testing plastics. Glass

reinforced plastics -- Determination of volatile matter and resin content

of synthetic resin-impregnated

textile glass fabric


BS 5734-5:1990 Polyester moulding compounds for electrical and other purposes --

Specification for sheet moulding compounds for mechanical

purposes


BS 6882:1987 Guide for storage of raw solid natural and synthetic rubber


BS 5270-1:1989 Bonding agents for use with

gypsum plasters and cement --

Specification for polyvinyl acetate (PVAC) emulsion bonding agents

for indoor use with gypsum building plasters


BS 5350-C7:1990 Methods of test for adhesives.

Adhesively bonded joints: mechanical tests -- Determination

of creep and resistance to sustained application of force



of 148 January 2016



of cleavage strength of adhesive bonds




of bond strength in compressive shear



Adhesively bonded joints: mechanical tests -- 90$0D peel test

for a rigid-to-rigid assembly


BS 5350-D4:1976 Methods of test for adhesives.

Adhesively bonded joints:

environmental tests -- Determination of staining potential


BS 5350-G3:1987 Methods of test for adhesives -- Determination of ability of

anaerobic adhesives to set on metal surfaces



Adhesively bonded joints: mechanical tests -- Climbing drum

peel test


BS 5350-E1:1976 Methods of test for adhesives. Sampling and analysis of test data

-- Guide to statistical analysis


BS 5350-A2:1990 Methods of test for adhesives. Adherends -- Guide to the selection

of adherend materials


BS 5350-A1:1976 Methods of test for adhesives.

Adherends -- Adherend preparation


BS 5350-B5:1976 Methods of test for adhesives --

Determination of gelation time


BS 3046:1981 Specification for adhesives for hanging flexible wallcoverings


BS 5350-0:1987 Methods of test for adhesives --



BS 6997:1990 Specification for elastomeric

toroidal sealing rings ('O'-rings) manufactured from acrylonitrile-

butadiene rubbers complying with BS 6996


BS 6716:1986 Guide to properties and types of

rubber


BS 7044-4:1991 Artificial sports surfaces -- Specification for surfaces for multi-

sports use

PRI/57 partially replaced by BS EN 14877:2006, BS

EN 14904:2006, BS EN

15330-1:2007 and BS 15330-2

Reconfirm

BS 7874:1998 Method of test for microbiological

deterioration of elastomeric seals for joints in pipework and pipelines



of 148 January 2016

BS

3379:2005+A1:2011

Combustion modified flexible

polyurethane cellular materials for loadbearing applications.

Specification

PRI/71 current Confirm

BS 4023:1975 Specification for flexible cellular

PVC sheeting


BS 7523:1991 Specification for preformed cellular polyethylene (PE) materials for the

thermal insulation of pipework


BS 4841-5:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for

building end-use applications --

Specification for laminated boards (roofboards) with auto-adhesively

or separately bonded facings for use as thermal insulation boards

for pitched roofs

PRI/72/4 confirmed (2011) Reconfirm

BS 4841-2:2006 Rigid polyisocyanurate (PIR) and

polyurethane (PUR) products for building end-use applications --

Specification for laminated boards with auto-adhesively bonded

facings for use as thermal insulation for internal wall linings

and ceilings


BS 2782-3:Method 360C:1991

Methods of testing plastics. Mechanical properties --

Determination of tear resistance of

plastics film and sheeting by the initiation method


BS 2782-1:Method

131B:1983


Thermal properties -- Determination of extensibility after

heat ageing of flexible polyvinyl

chloride sheet


BS 2782-1:Method

150C:1983


Thermal properties -- Determination of low temperature

extensibility of flexible polyvinyl

chloride sheet


BS 2782-6:Method

643A:1976


Dimensional properties --

Shrinkage on heating of film intended for shrink wrapping

applications


BS 2782-8:Method 826A:1992

Methods of testing plastics. Other properties -- Determination of

adhesion of print on plastics sheet


BS 2782-1:Method

150D:1976


Thermal properties -- Cold crack

temperature of film and thin sheeting


BS 7344:1990 Specification for reeled low density

polyethylene film for general purpose application


BS 3012:1970 Specification for low and intermediate density polythene

sheet for general purposes



of 148 January 2016

BS 2919:1968 Specification for low and

intermediate density polythene rod for general purposes


BS 3878:1982 Specification for flexible PVC

sheeting for hospital use


BS 7476:1991 Specification for polyethylene film for covering silage


BS 3757:1978 Specification for rigid PVC sheet PRI/75 confirmed (2011) Reconfirm

BS 4965:1999 Decorative laminated plastics sheet veneered boards and panels


BS 8472:2011 Methods for the assessment of the

oxo-biodegradation of plastics and

of the phyto-toxicity of the residues in controlled laboratory conditions

PRI/82 current Confirm

BS 6564-3:1990 Polytetrafluoroethylene (PTFE) materials and products --

Specification for E glass fibre filled polytetrafluoroethylene


BS 2880:1991 Methods of testing cellulose acetate flake


BS 5255:1989 Specification for thermoplastics

waste pipe and fittings

PRI/88 partially replaced by

BS EN 1329-1:2000,

BS EN 1455-1:2000, BS EN 1519-1:2000,

BS EN 1565-1:2000 and BS EN 1566-

1:2000

Confirm

BS 5392-1:2006 Acrylonitrile-butadiene-styrene

(ABS) fittings for use with ABS pressure pipe -- Specification


BS 5391-1:2006 Acrylonitrile-butadiene-styrene

(ABS) pressure pipe -- Specification

PRI/88/2 confirmed (2011)

BS 6076:1996 Specification for polymeric film for use as a protective sleeving for

buried iron pipes and fittings (for

site and factory application)

PSE/10 confirmed (2011) Reconfirm

BS 416-1:1990 Discharge and ventilating pipes and

fittings, sand-cast or spun in cast iron -- Specification for spigot and

socket systems


BS 1560-3.2:1989 Circular flanges for pipes, valves

and fittings (Class designated). Steel, cast iron and copper alloy

flanges -- Specification for cast iron

flanges


BS 3293:1960 Specification for carbon steel pipe

flanges (over 24 inches nominal size) for the petroleum industry

PSE/15 confirmed (2011)

BS 6956-5:1992 Jointing materials and compounds -

- Specification for jointing compounds for use with water, low

pressure saturated steam, 1st

family gases (excluding coal gas) and 2nd family gases

PSE/15/2 confirmed (2011) Reconfirm


of 148 January 2016

BS 7076-3:1989 Dimensions of gaskets for flanges

to BS 1560 -- Specification for non-metallic envelope gaskets


BS 6956-1:1988 Jointing materials and compounds -

- Specification for corrugated metal joint rings


BS 7531:2006 Rubber bonded fibre jointing for industrial and aerospace purposes.

Specification


BS 3381:1989 Specification for spiral wound gaskets for steel flanges to BS

1560


BS 3063:1965 Specification for dimensions of gaskets for pipe flanges

PSE/15/2 confirmed (2011)

BS 7786:2006 Specification for unsintered PTFE

tapes for general use


BS 4249:1989 Specification for paper and

cork/paper jointing


BS 4371:1991 Specification for fibrous gland packings


BS 7775:2005 Penstocks for use in water and

other liquid flow applications.

Specification


BS 2000-455:2011 Methods of test for petroleum and

its products -- Determination of the manganese content of gasoline.

Atomic absorption spectrometry

(AAS) method

PTI/13 current Reconfirm

BS 2000-19:2011 Methods of test for petroleum and its products -- Determination of

demulsibility characteristics of lubricating oil (Identical with IP

19/11)



its products -- Determination of oxidation stability of straight

mineral oil (Identical with IP 306/11)



its products -- Determination of oxidation characteristics of

lubricating oil (Identical with IP

48/11)

PTI/13 current


its products -- Determination of

kerosine burning characteristics 24-hour method

PTI/13 current Confirm

BS 1016-6:1977 Methods for analysis and testing of

coal and coke -- Ultimate analysis

of coal

PTI/16 partially replaced by

Sections and

subsections of BS 1016

Confirm


coal and coke -- Ultimate analysis of coke


Subsections of BS 1016

Confirm


coal and coke -- Chlorine in coal and coke


BS 1016-106.6.1:1997

Confirm


of 148 January 2016

BS

2869:2010+A1:2011

Fuel oils for agricultural, domestic

and industrial engines and boilers. Specification

PTI/2 current

BS 1894:1992 Specification for design and

manufacture of electric boilers of welded construction

PVE/2 partially replaced by

BS EN 12953-8:2001

Confirm

BS 341-4:2004 Transportable gas container valves -- Pressure relief devices

PVE/3/1 confirmed (2009) Reconfirm

BS 8562:2011 Gas cylinders. In situ, non-destructive examination and testing

of refillable seamless steel tubes of water capacity between 150 L and

3000 L, used for compressed gases Specification

PVE/3/7 current

BS 8535:2011 Railway applications. Wheelsets

and bogies. Powered and non-powered axles with inboard

bearings. Design method

RAE/3 current Confirm

BS 845-2:1987 Methods for assessing thermal

performance of boilers for steam,

hot water and high temperature heat transfer fluids. --

Comprehensive procedure

RHE/10 confirmed (2011) Reconfirm

BS 845-1:1987 Methods for assessing thermal performance of boilers for steam,

hot water and high temperature

heat transfer fluids -- Concise procedure


BS 779:1989 Specification for cast iron boilers for central heating and indirect hot

water supply (rated output 44 kW

and above)

RHE/10 partially replaced by BS EN 303-1:1999 and

BS EN 303-4:1999

Confirm

BS 7190:1989 Method for assessing thermal

performance of low temperature hot water boilers using a test rig


BS 853-2:1996 Specification for vessels for use in

heating systems -- Tubular heat exchangers and storage vessels for

building and industrial services


BS 853-

1:1990+A3:2011

Specification for vessels for use in

heating systems -- Calorifiers and storage vessels for central heating

and hot water supply

RHE/12 current Confirm

BS 7478:1991 Guide to selection and use of

thermostatic radiator valves


BS 4376:1982 Specification for electrically

operated blood storage refrigerators

RHE/19 partially replaced by

BS 4376-1:1991

Confirm

BS 5429:1976 Code of practice for safe operation of small-scale storage facilities for

cryogenic liquids



of 148 January 2016

BS 8303-2:1994 Installation of domestic heating

and cooking appliances burning solid mineral fuels -- Installation of

domestic heating and cooking appliances buring solid mineral

fuels. Specification for installing

and commissioning on site


BS 8303-3:1994 Installation of domestic heating

and cooking appliances burning solid mineral fuels --

Recommendations for design and on site installation


BS 1846-1:1994 Glossary of terms relating to solid

fuel burning equipment -- Domestic appliances


BS 5643:1984 Glossary of refrigeration, heating,

ventilating and air-conditioning terms


BS 31100:2011 Risk management. Code of practice and guidance for the

implementation of BS ISO 31000

RM/1 current

BS 1902-3.11:1983 Methods of testing refractory materials. General and textural

properties -- Measurement of

dimensions and shape of refractory bricks and blocks (methods 1902-

311)

RPI/1 confirmed (2011) Reconfirm

BS 1902-3.17:1990 Methods of testing refractory

materials. General and textural

properties -- Determination of volume and bulk density of dense

shaped products (methods 1902-317)



materials. General and textural properties -- Measurement of

dimensions of specimens for

testing (methods 1902-302)



properties -- Determination of pore size distribution (method 1902-

316)


BS 3446-2:1990 Glossary of terms associated with refractory materials -- Applications

in the coke, glass, cement and other non-metallurgical industries



properties -- Determination of

hydration tendency



materials. General and textural properties -- Sieve analysis

(methods 1902-303)



of 148 January 2016

BS 3446-3:1990 Glossary of terms associated with

refractory materials -- Applications in the metallurgical industries


BS 6434:1984 Guide to the use of BS 6065

'Methods for sampling and acceptance testing of shaped

refractory products'




properties -- Guidance on sampling




properties -- Introduction


BS 3056-2:1985 Sizes of refractory bricks --

Specification for bricks for use in glass-melting furnaces


BS 4207:1989 Code of practice for the installation

of monolithic linings for steel chimneys and flues


BS 3446-1:1990 Glossary of terms associated with

refractory materials -- General and manufacturing



Specification for bricks for rotary cement kilns



Specification for basic bricks for steel making


BS 3056-1:1985 Sizes of refractory bricks -- Specification for multi-purpose

bricks


BS 6886:1987 Specification for alumino-silicate refractories for use in coke ovens



Specification for bricks for ladles


BS 4966:1991 Specification for silica refractories

for use in coke ovens


BS 8904:2011 Guidance for community sustainable development

SDS/1/4 current Confirm

BS 8909:2011 Specification for a sustainability

management system for film

SDS/1/7 current Confirm

BS MA 18:1973 Specification for salt water piping

systems in ships

SME/32 confirmed (2011) Reconfirm

BS MA 78:1978 Specification for aluminium shore gangways

SME/32 confirmed (2011) Reconfirm

BS 6002-3:2005 Sampling procedures for inspection

by variables -- Guide to double

sampling schemes indexed by acceptance quality limit (AQL) for

lot-by-lot inspection

SS/5 confirmed (2011) Reconfirm

BS 6000-1:2005 Guide to the selection and usage of acceptance sampling systems for

inspection of discrete items in lots -

- General guide to acceptance sampling



of 148 January 2016

BS 6000-2:2005 Guide to the selection and usage of

acceptance sampling systems for inspection of discrete items in lots -

- Guide to sampling by attributes



acceptance sampling systems for inspection of discrete items in lots -

- Guide to sampling by variables


BS 282; 389:1963 Specifications for lead chromes and

zinc chromes for paints

STI/1 confirmed (2011) Reconfirm

BS 388:1972 Specification for aluminium

pigments


BS 3900-F6:1976 Methods of test for paint. Durability

tests on paint films -- Notes for

guidance on the conduct of natural weathering test


BS 4800:2011 Schedule of paint colours for building purposes

STI/14 current Confirm

BS 4800F:2011 BS 4800 Colour matching fan STI/14 current Confirm

BS 6496:1984 Specification for powder organic coatings for application and stoving

to aluminium alloy extrusions, sheet and preformed sections for

external architectural purposes,

and for the finish on aluminium alloy extrusions, sheet and

preformed sections coated with powder organic coatings

STI/21 confirmed (2011)

BS 245:1976 Specification for mineral solvents

(white spirit and related hydrocarbon solvents) for paints

and other purposes


BS 3761:1995 Specification for solvent-based

paint remover


BS 3279:1960 Specification for seedlac STI/3 confirmed (2011) Reconfirm

BS 3745:1970 Method for the evaluation of

results of accelerated corrosion tests on metallic coatings


BS 4921:1988 Specification for sherardized

coatings on iron or steel


BS 3831:1964 Specification for vitreous enamel finishes for domestic and catering

appliances


BS 4900:1976 Specification for vitreous enamel colours for building purposes


BS 4950:1973 Specification for sprayed and fused

metal coatings for engineering

purposes


BS 4761:1971 Specification for sprayed unfused

metal coatings for engineering

purposes


BS 4495:1969 Recommendations for the flame

spraying of ceramic and cermet coatings


BS 11000-2:2011 Collaborative business relationships

-- Guide to implementing BS 11000-1

SVS/1/4 current


of 148 January 2016

BS 8453:2011 Compliance framework for

regulated financial services firms. Specification

SVS/6/2 current Confirm

BS 8564:2011 Furniture removal activities.

Overseas moving services. Specification

SVS/7/2 current Confirm

BS 8877:2011 Online recruitment. Code of practice

SVS/9 current Confirm

BS 1892-3:2003 Gymnasium equipment -- Sports

mats. Specification for fire safety requirements for mats, mattresses

and landing areas

SW/136/22 confirmed (2011) Reconfirm

BS 1892-2.9:1986 Gymnasium equipment. Particular

requirements -- Specification for

weight training equipment



requirements -- Specification for boxing rings


BS 4745:2005 Determination of the thermal

resistance of textiles. Two-plate method: fixed pressure procedure,

two-plate plate method: fixed

opening procedure, and single-plate method

TCI/24 confirmed (2011) Reconfirm

BS 947:1970 Specification for a universal system for designating linear density of

textiles (Tex system)

TCI/24 confirmed (2011) Withdraw

BS 7141-2:1991 Narrow fabrics -- Specification for cotton webbings for personal load

carrying purposes

TCI/24 confirmed (2011)

BS 7141-1:1991 Narrow fabrics -- Specification for polyamide and polyolefin woven

tapes and webbings


BS 7141-4:1990 Narrow fabrics -- Specification for woven elastic webbings containing

natural rubber


BS 1625-6 and 4830:1972

Specifications for woven cotton tapes, light, medium and heavy

qualities


BS 7141-5:1990 Narrow fabrics -- Specification for

elastic flat braids containing natural

rubber


BS 984:1990 Method for determination of net

mass of retail packages of knitting

and rug yarns


BS 7318:1990 Specification for industrial sewing

threads made from linen (flax) or cotton


BS 4134:1990 Method for designation of ticket

numbers of industrial sewing threads



woven cotton tapes and webbings


BS 1664-8:1974 Specifications for woven cotton webbings of five qualities


BS 7144:1989 Specification for flax and jute

fabrics for industrial use



of 148 January 2016


wool tapes


BS 7200:1989 Specification for synthetic-fibre needlefelts


BS 6131:1982 Glossary of terms relating to

household sewing machines


BS 7033-2:1989 Cleaning and polishing cloths --

Specification for industrial wipers from reclaimed materials, and

waste yarn for cleaning and lubricating purposes



Specification for floorcloths and

dishcloths


BS 8466:2006 Hats. Protection against solar UVR.

Method of test and performance

requirements

TCI/66 current


Specification for general polishing cloths



Specification for window cleaning cloths


BS 5815-1:2005 Sheets, sheeting, pillowslips,

towels, napkins, counterpanes and continental quilt secondary covers

suitable for use in the public sector -- Specification for sheeting, sheets

and pillowslips

TCI/66/1 confirmed (2011) Reconfirm

BS 5335-2:2006 Continental quilts -- Determination of thermal resistance for quilts

filled with feather and/or down

TCI/66/1 confirmed (2011) Reconfirm

BS 5131-6.2:1979 Methods of test for footwear and footwear materials. Codes of

practice -- Code of practice for the identification in footwear wear

trials of major weaknesses in

design or construction and the assessment of fitness-for-purpose


BS 5131-1.3:1991 Methods of test for footwear and footwear materials. Adhesives --

Preparation of test assemblies using adhesives (other than hot

melt adhesives) for heat resistance

(creep) and peel tests


BS 5131-6.1:1981 Methods of test for footwear and

footwear materials. Codes of practice -- Code of practice for the

comparative evaluation by wear

trial of materials, components or constructions



footwear materials. Adhesives -- Recommended environmental

storage conditions for adhesive joints prior to heat resistance or

peeling tests



of 148 January 2016


footwear materials. Uppers, textiles and threads -- Strength of upper

materials and lining materials at right angles to stitch perforations



footwear materials. Adhesives --

Preparation of test assemblies using hot melt adhesives for heat

resistance (creep) and peel tests


BS 5131-5.13:1980 Methods of test for footwear and footwear materials. Testing of

complete footwear -- Measurement

of the strength of stitched seams in upper and lining materials


BS 3424-14:1985 Testing coated fabrics -- Method

16. Methods for determination of colour fastness to wet and dry

rubbing and determination of

resistance to printwear



complete footwear -- Determination of the strength of

buckle fastening assemblies



footwear materials. Adhesives -- Rate of bond strength development

in shear of hot melt adhesives for lasting


BS 3424-22:1983 Testing coated fabrics -- Method 25. Methods for determination of

fusion of PVC coatings and the state of cure of vulcanized rubber

coatings


BS 5131-2.7:1980 Methods of test for footwear and footwear materials. Solings -- The

preparation of test pieces from soling materials for physical testing


BS 3424-26:1990 Testing coated fabrics -- Methods 29A, 29B, 29C and 29D. Methods

for determination of resistance to

water penetration and surface wetting



complete footwear -- Degree of

vulcanization of moulded-on rubber soles



footwear materials. Testing of complete footwear -- Strength of

top piece attachment to shoe heels



footwear materials. Testing of

complete footwear -- Fatigue test for rigid units and shoe bottoms



of 148 January 2016


footwear materials. Solings -- Ross flexing method for cut growth

resistance of soling materials



footwear materials. Testing of complete footwear -- Impact test

for rigid units and shoe bottoms



39. Method for determination of

the dimensional stability of coated fabrics to domestic washing


BS 5131-2.11:1983 Methods of test for footwear and footwear materials. Solings --

Resistance of solings to short-term contact with a hot surface


BS 5131-4.8:1990 Methods of test for footwear and footwear materials. Other

components -- Resistance of heels of ladies' shoes to lateral impact


BS 5131-3.4:1978 Methods of test for footwear and footwear materials. Uppers, textiles

and threads -- Edgewise

compressibility, upper materials



footwear materials. Testing of complete footwear -- Adhesion of

stuck-on and moulded-on soles



23. Method for determination of dimensional changes on

mechanical relaxation at zero

tension



footwear materials. Testing of complete footwear -- Resistance of

complete footwear to heat


BS 3144:Addendum

No. 1:1981

Sampling and physical testing of

leather -- Determination of

resistance to bending and abrasion of heavy leather


BS 3424-25:1993 Testing coated fabrics -- Method 28. Method for determination of

the coating thickness and thickness of any expanded layer



components -- Resistance to

peeling of ribs stuck to insoles



footwear materials. Uppers, textiles and threads -- Abrasion resistance

of shoe laces


BS 3424-18:1986 Testing coated fabrics -- Methods

21A and 21B. Methods for determination of resistance to

wicking and lateral leakage



of 148 January 2016


footwear materials. Adhesives -- Resistance of adhesive joints to

heat (creep test)



footwear materials. Uppers, textiles and threads -- Breaking strength of

shoe laces



footwear materials. Adhesives --

Measurement of green strength of adhesive joints



components -- Shear strength of ribs stuck to insoles



complete footwear -- Sole bond peeling strength



components -- Resistance to

peeling of insole board



footwear materials. Uppers, textiles and threads -- The break/pipiness

test



footwear materials. Adhesives -- Resistance of adhesive joints to

peeling




dimensional stability to water immersion



components -- Tensile strength of fibreboard


BS 3424-34:1992 Testing coated fabrics -- Method 37. Method for determination of

water vapour permeability index (WVPI)


BS 7269-1:1991 Drycleanability of leather garments

-- Specification for drycleanability and for appropriate care labels



footwear materials. Other components -- Flexing index of

fibreboard



34. Method for determination of resistance to scuffing and snagging



of 148 January 2016

BS 3424-13:1999 Testing coated fabrics -- Guide to

the selection of methods for colour fastness to light testing



27A and 27B. Methods for determination of abrasion

resistance


BS 3144:Addendum

No. 2:1981

Sampling and physical testing of

leather -- Measurement of water

vapour absorption




elongation and tension set



22A, 22B and 22C. Determination of sulphur staining


BS 3546:2001 Coated fabrics for use in the

manufacture of water penetration resistant clothing



12A and 12B Determination of surface drag


BS 5131-0:1990 Methods of test for footwear and

footwear materials -- General introduction


BS 7269-2:1991 Drycleanability of leather garments

-- Method for assessing drycleanability


BS 7141-6:1989 Narrow fabrics -- Specification for laces for footwear and other

purposes


BS 3424-16:1995 Testing coated fabrics -- Method 18. Determination of air

permeability


BS 3424-28:1995 Testing coated fabrics -- Method 31. Determination of specular gloss


BS 5455:1977 Specification for polyurethane

coated nylon fabric for mattress

covers


BS 3424-38:1998 Testing coated fabrics --

Determination of wounded burst strength


BS 3935:1991 Guide to classification and marking

of cattle hides and calfskins


BS 4981:1984 Specification for Mondopoint footwear sizing and marking

system


BS 6453:1984 Specification for performance of leathers for garments


BS 7451:1991 Specification for archival quality

bookbinding leather


BS 2797:1976 Specification for leathers for gas

meter diaphragms


BS 3424-0:2000 Testing coated fabrics -- Index of parts


BS 6715:1991 Specification for chamois leather TCI/69 confirmed (2011) Reconfirm

BS 5833:1988 Scheme for labelling of footwear TCI/69 confirmed (2011)


of 148 January 2016

BS 4674:1971 Methods for the determination of

the breaking load and knot breaking load of netting yarns for

fishing nets


BS 3367:1999 Specification for ropes and lines for fire service use other than for rope

rescue purposes


BS 4406:1969 Specification for the designation in

the Tex system of netting yarns for

fishing nets


BS 1214:1977 Specification for hessian sandbags

and rot-proofed hessian sandbags


BS 5398:1976 Classification of methods for

mounting and joining of fishing nets


BS 3566:1982 Specification for lightweight

salvage sheets for fire service use


BS 1103:1989 Specification for fabrics for the reinforcement of rubber hoses


BS 7648:1993 Specification for double braided

ropes made from man-made fibre


BS 5127:1974 Specification for polyolefin webbing

for divans and bed bases


BS 4881:1993 Specification for polypropylene film cords, lines and twines


BS 3104:1970 Specification for polyamide (nylon)

mountaineering ropes


BS 4763:1971 Methods for cutting knotted netting

to shape (tapering)


BS 525:1991 Specification for fibre cores for wire ropes


BS 6170:1981 Specification for flax canvas water

buckets


BS 6894:1987 Specification for jute hessian

tubing


BS 3408:1992 Specification for tarpaulins TCI/77 confirmed (2011) Reconfirm

BS 6810-2:2005 Determination of metals in textiles -- Analysis by atomic emission

spectroscopy


BS 8459:2005 Determination of extractable matter in textiles. Method


BS 4407:1988 Methods for quantitative analysis of

fibre mixtures

TCI/80 replaced by Parts of

BS EN ISO 1833

BS

1006:B01C:LFS1:1982

Methods of test for colour fastness

of textiles and leather. Blue wool standards -- Reference standard

for no. 1


BS

1006:B01C:LFS2:1985



for no. 2


BS

1006:B01C:LFS3:1989



for no. 3

TCI/81 confirmed (2011) Withdraw


of 148 January 2016

BS

1006:B01C:LFS4:1990



for no. 4


BS

1006:B01C:LFS5:1988



for no. 5


BS

1006:B01C:LFS6:1988


of textiles and leather. Blue wool

standards -- Reference standard for no. 6


BS 1006:B01C:LFS7:1985

Methods of test for colour fastness of textiles and leather. Blue wool



BS 1006:B01C:LFS8:1987

Methods of test for colour fastness of textiles and leather. Blue wool



BS 6923:1988 Method for calculation of small colour differences


BS 6246-5:1991 Industrial laundry machinery -- Methods for the assessment of the

effect of shaped garment finishing machinery on textiles


BS 7305:1990 Method for determination of the maximum safe ironing temperature

of fabrics


BS 5742:1989 Specification for textile labels requiring to be washed and/or dry

cleaned


BS 7940:1999 Analogue PSTN terminal support interface

TCT/2 confirmed (2011) Reconfirm

BS 3730-2:1982 Assessment of departures from

roundness -- Specification for characteristics of stylus instruments

for measuring variations in radius

(including guidance on use and calibration)

TDW/4 current Confirm

BS 1646-3:1984 Symbolic representation for process measurement control

functions and instrumentation --

Specification for detailed symbols for instrument interconnection

diagrams

TDW/4 confirmed (2011) Reconfirm

BS 1646-2:1983 Symbolic representation for process measurement control

functions and instrumentation -- Specification for additional basic

requirements

TDW/4 confirmed (2011)

BS 959:2008 Specification for internal micrometers (including stick

micrometers)

TDW/4 current Confirm

BS 969:2008 Specification for limits and tolerances on plain limit gauges

TDW/4 partially replaced by BS EN ISO 1938-

1:2015

Confirm


of 148 January 2016

BS 887:2008 Precision vernier callipers.


TDW/4 partially replaced by

BS EN ISO 13385-1:2011

Confirm

BS 907:2008 Specification for dial gauges for

linear measurement


BS EN ISO 463:2006

Confirm

BS 3777:1964 Specification for screw thread measuring cylinders

TDW/4 replaced by BS 5590:1978

Confirm

BS 1643:2008 Specification for precision vernier

height gauges


BS EN ISO 13225:2012

Confirm

BS 6365:2008 Specification for precision vernier

depth gauges


BS EN ISO 13385-2:2011

Confirm

BS 870:2008 Specification for external micrometers

TDW/4 partially replaced by BS EN ISO 3611:2010

Confirm

BS 2795:1981 Specification for dial test indicators (lever type) for linear measurement

TDW/4/4 replaced by BS EN ISO 9493:2010 and has

been declared obsolescent

Confirm

PD 68888:2011 Objectives and learning outcomes for BS 8888 training

TDW/4/6 current

BS 7373-2:2001 Product specifications -- Guide to

identifying criteria for a product

specification and to declaring product conformity

TDW/4/7 confirmed (2011) Reconfirm

BS 8887-240:2011 Design for manufacture, assembly, disassembly and end-of-life

processing (MADE) -- Reconditioning

TDW/4/7 current Confirm

BS 7373-3:2005 Product specifications -- Guide to

identifying criteria for specifying a service offering


BS 7373-1:2001 Guide to the preparation of

specifications -- Guide to preparation


BS 3300:1974 Specification for kerosine (paraffin) unflued space heaters, cooking and

boiling appliances for domestic use

W/- confirmed (2011) Withdraw

BS 3300:1985 Specification for paraffin unflued space heating and cooking

appliances for domestic use


BS 2049:1985 Specification for paraffin lighting appliances for domestic use


BS 4570:1985 Specification for fusion welding of

steel castings

WEE/-/1 partially replaced by

BS EN 1011-8:2004

Confirm

BS 7363:1990 Method for bead-on-plate (BOP)

test for welds

WEE/2 confirmed (2009) Reconfirm

BS 4677:1984 Specification for arc welding of austenitic stainless steel pipework

for carrying fluids


BS 6990:1989 Code of practice for welding on steel pipes containing process

fluids or their residuals


BS 2633:1987 Specification for Class I arc welding of ferritic steel pipework for

carrying fluids



of 148 January 2016

BS 2971:1991 Specification for class II arc

welding of carbon steel pipework for carrying fluids


BS 4515-2:1999 Specification for welding of steel

pipelines on land and offshore -- Duplex stainless steel pipelines

WEE/21/7 confirmed (2011) Reconfirm

BS 7670-2:1997 Steel nuts and bolts for resistance projection welding -- Specification

for welding of weld nuts and weld

bolts


BS 4871-3:1985 Specification for approval testing of

welders working to approved

welding procedures -- Arc welding of tube to tube-plate joints in

metallic materials

WEE/36 confirmed (2011)

BS 9690-2:2011 Non-destructive testing. Guided

wave testing -- Basic requirements

for guided wave testing of pipes, pipelines and structural tubulars

WEE/46 current Confirm

BS 9690-1:2011 Non-destructive testing. Guided wave testing -- General guidance

and principles

WEE/46 current Confirm

BS 2737:1956 Terminology of internal defects in castings as revealed by

radiography



of 148 January 2016

BS identifier BS_Title Committee Status Final Review

Outcome

BS 3G 100-

2.3.6:1972

Specification for general requirements for

equipment for use in aircraft. All equipment. Environmental conditions -- Acceleration

requirements


BS 3G 100-2.3.12:1991

Specification for general requirements for equipment for use in aircraft. All equipment.

Environmental conditions -- Fluid

contamination


BS 3G 100-

2.3.14:1973


equipment for use in aircraft. All equipment. Environmental conditions -- Acoustic

vibration


BS 3G 100-2.3.5:1972


Environmental conditions -- Explosion-

proofness


BS 3G 100-

2.3.7:1972


equipment for use in aircraft. All equipment. Environmental conditions -- Tropical

exposure


BS 3G 100-2.3.11:1973


Environmental conditions -- Water-proofness


BS 3G 100-2.3.10:1974


Environmental conditions -- Impact icing


BS 3G 100-2.3.9:1972


Environmental conditions -- Ice formation


BS 3G 100-2.3.3:1972


Environmental conditions -- Mould growth


BS 3G 100-2.3.1:1969


Environmental conditions -- Vibration


BS 3G 100-

2.3.8:1972


equipment for use in aircraft. All equipment.

Environmental conditions -- Salt mist


BS 3G 100-2.2:1972 Specification for general requirements for

equipment for use in aircraft. All equipment -

- Magnetic influence


BS G 246:1991 Specification for cable ties for installation

under controlled tension on aircraft electric cable harnesses

ACE/6 partially replaced

by parts of BS EN 4056 & BS EN

4057

BS G 194:1965 Specification for lever-operated manual switches for aircraft

ACE/6 replaced by BS G 224:1978

BS G 200:1967 Specification for miniature lever-operated

manual switches

ACE/6 replaced by BS G

224:1978

BS G 154:1958 Screws with captive washers for aircraft ACE/6 partially replaced

by BS G 203:1967

BS G 264:2005 Specification for avionic data transmission interface systems. Utilities bus


BS 5L 101:2011 Procedure for inspection, testing and

acceptance of aluminium-base and magnesium-base ingots and castings

ACE/61 current


of 148 January 2016


Outcome

BS 3L 500:2011 Procedure for inspection, testing and

acceptance of wrought magnesium base alloys

ACE/61 current

BS 2S

201:2004+A1:2011

Carbon steel wire rod, patented cold drawn

carbon steel wire and springs. High duty unground wire. Specification

ACE/61/-

/15

current

BS 2S

202:2004+A1:2011

Carbon steel wire rod, patented cold drawn

carbon steel wire and springs. High duty ground wire. Specification

ACE/61/-

/15

current

BS 3B 27:2009 Specification for copper-zinc-aluminium-

nickel-silicon alloy tube

ACE/61/-

/16

current

BS 7L 37:1989 Specification for wire for solid cold-forged

rivets of aluminium-copper-magnesium-

silicon-manganese alloy (for use in the solution treated and naturally aged condition)

(not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)

ACE/61/-

/24

confirmed (2011)

BS L 102:1971 Specification for bars and extruded sections

of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged

at room temperature) (not exceeding 200 mm diameter or minor sectional dimension)

(Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

ACE/61/-

/24

replaced by BS EN

2100:1992

BS L 119:1975 Specification for ingots and castings of aluminium-copper-nickel-manganese-

titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu

5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2,

Sb 0.2)

ACE/61/-/24

confirmed (2011)


magnesium-silicon-copper-chromium alloy

(solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm

thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)

ACE/61/-

/24

confirmed (2011)

BS L 118:1975 Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy

(solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm

thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)

ACE/61/-/24

confirmed (2011)

BS L 114:1971 Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution

treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable

for welding) (Mg 0.8, Si 1, Mn 0.7)

ACE/61/-/24

confirmed (2011)

BS L 105:1971 Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution

treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg

0.5, Si 0.7, Mn 0.8)

ACE/61/-/24

confirmed (2011)

BS L 160:1976 Specification. Bars and extruded sections of aluminium-zinc-magnesium-copper-chromium

alloy (solution treated and artificially aged to

an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)

ACE/61/-/24

replaced by BS EN 2127:1992


of 148 January 2016


Outcome

BS L 111:1971 Specification for bars and extruded sections

of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation

treated) (suitable for welding) (Mg 0.8, Si 1,

Mn 0.7)

ACE/61/-

/24

replaced by BS EN

2326:1992

BS 2L 77:1971 Specification for forging stock and forgings of

aluminium-copper-magnesium-silicon-

manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7,

Mn 0.8)

ACE/61/-

/24

confirmed (2011)

BS 2L 95:1971 Specification for plate of aluminium-zinc-

magnesium-copper-chromium alloy (solution

treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu

1.6, Cr 0.15)

ACE/61/-

/24

replaced by BS EN

2126:1992

BS 3L 63:1971 Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution

treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

ACE/61/-/24

confirmed (2011)

BS 4L 56:1986 Specification for tube of aluminium-2$9D%

magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not

exceeding 12 mm wall thickness)

ACE/61/-

/24

confirmed (2011)

BS 2L 126:1970 Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy

(precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6)

ACE/61/-/24

confirmed (2011)

BS L 154:1977 Specification for ingots and castings of

aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu

4, Si 1)

ACE/61/-

/24

confirmed (2011)

BS L 155:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution

treated and artificially aged) (Cu 4, Si 1)

ACE/61/-/24

confirmed (2011)

BS 4L 54:1986 Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically)

(not exceeding 12 mm wall thickness)

ACE/61/-/24

confirmed (2011)

BS 5L 36:1985 Specification for wire for solid, cold-forged

rivets of 99.5% aluminium (not exceeding 10

mm diameter)

ACE/61/-

/24

confirmed (2011)

BS 6L 16:1985 Specification for sheet and strip of 99%

aluminium (temper designation H14 or H24)

ACE/61/-

/24

confirmed (2011)

BS 6L 17:1985 Specification for sheet and strip of 99% aluminium (temper designation-O)

ACE/61/-/24

confirmed (2011)

BS 2HR 650:2011 Specification for high expansion heat-

resisting steel bar and wire for the manufacture of bolts, studs, set screws and

nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 50 mm)

ACE/61/-

/48

current

BS 3HR 502:2011 Specification for nickel-chromium-cobalt-

titanium- aluminium heat-resisting alloy cold drawn and solution treated wire for springs

and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)

ACE/61/-

/48

current


of 148 January 2016


Outcome

BS 3HR 504:2011 Specification for nickel-chromium-titanium

heat-resisting alloy bar and wire for rivets and rivets (Maximum diameter or minor

sectional dimension 20 mm) (Nickel base, Cr

19.5, Ti 0.4)

ACE/61/-

/48

current


titanium- aluminium heat-resisting alloy wire

for thread inserts (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) (0.45 mm to 2 mm

diameter)

ACE/61/-

/48

current


titanium- aluminium heat-resisting alloy cold

drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)

ACE/61/-

/48

current


molybdenum- titanium-aluminium heat-resisting alloy plate, sheet and strip (Nickel

base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)

ACE/61/-

/48

current

BS 2HR 404:2011 Specification for nickel-cobalt-chromium-

molybdenum- titanium-aluminium heat-

resisting alloy seamless tubes (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)

ACE/61/-

/48

current

BS 2HR 240:2011 Specification for cobalt-chromium-tungsten-

nickel-manganese heat-resisting alloy plate, sheet and strip (Cobalt base, Cr 20, W 15, Ni

10, Mn 1.5)

ACE/61/-

/48

current


titanium-aluminium heat-resisting alloy

seamless tubes (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)

ACE/61/-

/48

current

BS 3HR 401:2011 Specification for nickel-chromium-titanium-

aluminium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)

ACE/61/-

/48

current

BS 2HR 403:2011 Specification for nickel-chromium-titanium

heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Ti 0.4)

ACE/61/-

/48

current

BS 3TA 11:2009 Specification for bar and section for machining of titanium-aluminium -vanadium

alloy (tensile strength 900-1160 MPa)

(limiting ruling section 150 mm)

ACE/61/-/49

partially replaced by BS EN

3355:2012

BS F 159:2006 Properties of elastomeric toroidal sealing

rings ("O" rings) manufactured from oil

resistant silicone rubber material conforming to BS F 153. Specification


BS F 162:2006 Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from

ethylene-propylene rubber material

conforming to BS F 156. Specification


BS F 164:2006 Properties of elastomeric toroidal sealing

rings ("O" rings) manufactured from

fluorosilicone rubber material released to BS F 154. Specification


BS PL 4:2005 Properties of unsaturated polyester resins for low pressure laminating of high strength fibre

reinforced composites. Specification



of 148 January 2016


Outcome

BS PL 8:2005 Fibrous polyamide material for use as an

explosion suppressant and as a baffle material in aircraft fuel tanks. Specification


BS PL 9:2005 Fibrous polyamide material for use as an

explosion suppressant and as a baffle material in aircraft fuel tanks. Test methods


BS F 136:1989 Specification for pigmented

chlorosulphonated polyethylene rubber-coated nylon fabric (190 g/m$u2) for

aerospace purposes


BS PL 6:2005 Properties of unsaturated polyester resins for low pressure laminating of glass fibre

reinforced composites. Specification


BS PL 5:2005 Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced

composites. Test methods


BS PL 7:2005 Unsaturated polyester resins for low pressure

laminating of glass fibre reinforced laminates.

Test methods


BS F 156:2006 Properties of fluid resistant ethylene-

propylene rubber sheet, mouldings and

extrusions. Specification


BS 4F 124:1996 Specification for woven nylon 6.6 narrow

fabrics for aerospace purposes (nominally 940 dtex yarns)


BS F 157:2006 Properties of high tear strength silicone

rubber sheet, mouldings and extrusions. Specification


BS F 152:2006 Properties of silicone rubber sheet,

mouldings and extrusions (general purpose). Specification


BS F 153:2006 Properties of oil resistant silicone rubber

sheet, mouldings and extrusions. Specification


BS F 154:2006 Properties of fluorosilicone rubber sheet,

mouldings and extrusions. Specification


BS 4F 123:1996 Woven nylon narrow fabrics for aerospace

purposes (nominally 235 dtex yarns)


BS 3F 121:1995 Specification for metallic slide fasteners for aerospace purposes


BS F 143:1993 Specification for para-aramid braided cords

for aerospace purposes


BS 2F 52:1959 Flax reinforcement webbing for aeronautical

purposes


BS 2X 34:1998 Specification for two component polyurethane finish for aerospace purposes


BS G 257-1:1998 Design of electromagnetic hazard protection

of civil aircraft -- Guide to theory and threats


BS G 257-2:1998 Design of electromagnetic hazard protection

of civil aircraft -- Guide to protection


BS 8412:2004 Equipment for crop protection. Performance requirements for application systems used to

make spatially variable applications to field crops. Specification

AGE/15 confirmed (2011)


of 148 January 2016


Outcome

BS 6356-9:1996 Spraying equipment for crop protection --

Specification for systems for closed transfer of liquid formulations



Specification for performance limits for field spraying nozzles



Guide for typical data sheet layout



Specification for induction hoppers


BS 7411:1991 Specification for lever operated knapsack sprayers


BS 4115:1993 Specification for compression knapsack

sprayers


BS 7562-6:1992 Planning, design and installation of irrigation

schemes -- Guide for feasibility and

implementation procedures



schemes -- Guide for acquisition of site data


BS 7562-5:1993 Planning, design and installation of irrigation schemes -- Guide for irrigation equipment



schemes -- Guide to water resources



schemes -- Glossary of terms


BS 4742-6:1988 Hydraulic equipment for agricultural machinery -- Specification for dimensions and

location of agricultural tractor hydraulic

return to sump porting


BS 4742-8:1990 Hydraulic equipment for agricultural

machinery -- Method for colour coding of remote hydraulic power services and controls

on agricultural tractors


BS 4742-7:1989 Hydraulic equipment for agricultural machinery -- Specification for port

connections for agricultural trailed vehicle

hydraulic brake couplings


BS 3986-1:1998 Methods of test for drying performance of

agricultural grain dryers -- General procedures and limited requirements for

wheat


BS 3986-2:1998 Methods of test for drying performance of agricultural grain dryers -- Additional

procedures and crop specific requirements


BS 6142:1981 Specification for presentation of technical data on hydraulic systems of agricultural

tractors and machinery


BS 4639:1987 Specification for brakes and braking systems for towed agricultural vehicles


BS 5401:1990 Guide to information content and

presentation of operators' manuals provided for tractors and machinery for agriculture

and forestry


BS 2468-1:1994 Glossary of terms and classification relating

to agricultural machinery and implements. --

Power and tractive units



of 148 January 2016


Outcome

BS 6736:1986 Code of practice for hand signalling for use in

agricultural operations


BS 7986:2005 Data quality metrics for industrial measurement and control systems.

Specification

AMT/7 confirmed (2011)

BS AU 40-4a:1966 Specification for motor vehicle lighting and signalling equipment -- Sealed beam

headlamps


BS AU 156:1971 Recommendations for aiming of headlamps

and auxiliary lamps on motor vehicles


BS AU 47:1965 Specification for advance warning triangle to indicate temporary obstructions


BS AU 152:1970 Specification for rear marking plates for

vehicles


BS AU 162a:1976 Specification for headlamp optical aiming

devices


BS AU 242a:1998 Automotive windscreen repair. Code of practice


BS AU 200-2a:1984 Spray reducing devices for heavy goods

vehicles -- Specification for performance of suppression material and devices, and

air/water separating material and devices


BS AU 190:1983 Specification for interface dimensions and fixing bolts for the mounting of overrun

devices on delta shaped drawbars of trailers up to 2000 kg


BS AU 29:1964 Specification for drawbar eyes and

forecarriage pins for connection between trailers of 5-35 tons gross weight and towing

vehicle


BS AU 2a:1970 Specification for dimensions of 3$9H - 4$9H in diameter fifth wheel king pin for use with

extra heavy duty semi-trailers


BS AU 146b:1970 Specification for standard automatic roller-type coupling for semi-trailers not exceeding

7$9D tons laden weight


BS AU 30b:1970 Specification for standard automatic roller-type coupling for semi-trailers of 7 tons to

14$9L tons laden weight


BS AU 114b:1979 Specification for strength requirements of

towing brackets and coupling balls for

caravans and light trailers


BS AU 210-2:1994 Drawbars for caravans and light trailers --

Specification for the design of aluminium

drawbars and chassis


BS AU 217-2:1989 Maximum road speed limiters for motor

vehicles -- Specification for system and component requirements


BS AU 200-1a:1984 Spray reducing devices for heavy goods

vehicles -- Specification for design of containment devices


BS AU 25:1964 Specification for towing hook for use

between trailers of 5-14 tons gross weight and towing vehicle



of 148 January 2016


Outcome

BS AU 27:1964 Specification for towing hook for use

between trailers of 5-35 tons gross weight and towing vehicle


BS AU 26:1964 Specification for towing jaw for use between

trailers of 5-16 tons gross weight and towing vehicle


BS AU 28:1964 Specification for towing jaw for use between

trailers of 5-35 tons gross weight and towing vehicle


BS AU 217-1a:1987 Maximum road speed limiters for motor

vehicles -- Specification for installed requirements


BS AU 3:1970 Specification for clearance dimensions and

fifth wheel positions for tractors and semi-trailers


BS AU 181:1982 Specification for interface dimensions for demountable vehicle body systems


BS AU 24a:1989 Specification for towing connections for

trailers up to 5000 kg gross mass


BS 6765-4:1987 Leisure accommodation vehicles. Caravans -- Specification for undergear


BS AU 267:1998 Code of practice for breakaway cables and secondary couplings


BS AU 5:1963 Specification for dimensions of a 'contact'

type coupling for vacuum and pressure braking systems on trailers and semi-trailers

AUE/15 partially replaced

by BS AU 138a:1980

BS AU 91:1965 Specification for dimensions of electrical

cable connectors for starter battery taper terminal posts (cars and light commercial

vehicles using positive earth system)


BS AU 198:1984 Specification for electrical connections between towing vehicles and trailers with 24

V electrical equipment: type 24 S (supplementary)


BS AU 197:1984 Specification for electrical connections

between towing vehicles and trailers with 24 V electrical equipment: type 24 N (normal)


BS AU 16a:1989 Specification for electrical cable connectors

(17.5 A maximum continuous rating)


BS AU 7a:1983 Specification for colour code for road vehicle

electrical cables


BS AU 207:1986 Specification for dimensions of car radio installation space


BS AU 209-2:1988 Vehicle security -- Specification for security

systems against theft of in-car equipment for entertainment and communication purposes


BS AU 209-5b:1996 Vehicle security -- Specification for central

power locking systems for passenger cars and car derived vehicles


BS AU 209-3:1988 Vehicle security -- Specification for security

marking of glazing for passenger cars and car derived vehicles


BS AU 209-6a:1996 Vehicle security -- Specification for dead locking systems for passenger cars and car

derived vehicles



of 148 January 2016


Outcome

BS AU 209-4a:1995 Vehicle security -- Specification for security

glazing for passenger cars and car derived vehicles


BS AU 175-4a:1997 Vehicle identification numbers (VIN) --

Specification for a visible vehicle identification number


BS AU 209-1a:1992 Vehicle security -- Specification for locking

systems for passenger cars and car derived vehicles


BS AU 209-7:1993 Vehicle security -- Specification for locking

systems for goods vehicle driver's compartments


BS AU 209-8:1997 Vehicle security -- Specification for locking

systems for goods vehicle load compartments


BS AU 209-0:1996 Vehicle security -- Guide to the application of

security devices/systems to vehicles


BS AU 223a:2006 Design, construction performance and marking of vehicle support stands for cars

and light vans. Specification


BS AU 187:2000 Tow rope assemblies for towing passenger cars and light vans


BS 4585-18:1996 Methods of test for spices and condiments -- Determination of total capsaicinoid content of

chillies and chilli oleoresins (high-

performance liquid chromatographic method)

AW/-/2 confirmed (2011)

BS 7087-29:1997 Herbs and spices ready for food use --

Specification for dried whole dill seed, dill

leaves and ground dill



Specification for dried pimento (allspice)

(whole and ground)


BS 4585-2:1982 Methods of test for spices and condiments --

Determination of moisture content (entrainment method)



Specification for dried basil (bouquets, rubbed and ground)



Specification for dried rosemary (whole, rubbed and ground)



Specification for black and white pepper (whole and ground)



Specification for dried marjoram (whole, rubbed and ground)


BS 7087-20:1995 Herbs and spices ready for food use -- Specification for dried parsley (cut, rubbed

and ground)


BS 7087-22:1995 Herbs and spices ready for food use -- Specification for dried mustard seeds (whole

and ground)


BS 7087-23:1995 Herbs and spices ready for food use -- Specification for dried caraway seeds (whole

and ground)



of 148 January 2016


Outcome


Specification for dried mint (whole, rubbed and ground)



Specification for oregano (whole, rubbed and ground)



Specification for dried tarragon (whole and ground)



Specification for coriander seeds (whole and ground)


BS 7087-19:1994 Herbs and spices ready for food use. --

Specification for fennel seeds (whole and ground)


BS 7087-7:1996 Herbs and spices ready for food use -- Specification for dried fenugreek (whole or

ground)


BS 4585-6:1992 Methods of test for spices and condiments -- Determination of non-volatile ether extract


BS 4585-7:1989 Methods of test for spices and condiments --

Determination of Scoville index of chillies



Specification for dried thyme (whole and

ground)



Specification for dried sesame seeds

(dehulled)



Specification for dried sage (whole and

ground)



Specification for turmeric (whole and ground)


BS 7087-14:1992 Herbs and spices ready for food use -- Specification for dried nutmeg and dried

mace


BS 7087-15:1993 Herbs and spices ready for food use -- Specification for cinnamon (whole and

ground)



Specification for chillies (whole and ground)


BS 7087-26:1996 Herbs and spices ready for food use -- Specification for dehydrated garlic



Specification for dehydrated onion


BS 3936-9:1998 Nursery stock -- Specification for bulbs,

corms and tubers


BS 3936-10:1990 Nursery stock -- Specification for ground cover plants


BS 3936-7:1989 Nursery stock -- Specification for bedding

plants


BS 3936-3:1990 Nursery stock -- Specification for fruit plants AW/1 confirmed (2011)

BS 3936-2:1990 Nursery stock -- Specification for roses AW/1 confirmed (2011)

BS 998:1990 Specification for vacuum salt for food use AW/100 confirmed (2011)

BS 5226:1991 Code of practice for equipment and

procedures for the cleaning and disinfecting of milking machine installations



of 148 January 2016


Outcome

BS 5305:1984 Code of practice for cleaning and disinfecting

of plant and equipment used in the dairying industry


BS 4285-4:1991 Microbiological examination for dairy

purposes -- Methods for assessment of hygienic conditions


BS 7771:1994 Code of practice for pasteurization of milk on

farms and in small dairies


BS 684-0.1:1995 Methods of analysis of fats and fatty oils.

General introduction -- General procedures

and list of determinations in BS 684



Physical methods -- Determination of

penetration value



Physical methods -- Determination of cooling curve



Physical methods -- Determination of cloud point


BS 5190:1985 Specification for pipeline filters, filter bodies

and filter elements for milking installations


BS 4317-20:1999 Methods of test for cereals and pulses --

Determination of water absorption of flour

and rheological properties of doughs using a farinograph



Determination of protein quality of wheat by the sodium dodecyl sulphate (SDS) test



Determination of rheological properties of doughs using an extensograph


BS 4317-18:1988 Methods of test for cereals and pulses -- Determination of hidden insect infestation


BS 734C:1962 Measurement of the density of milk using a

hydrometer -- Percentage of total solids and non-fatty solids in milk corresponding to

given fat content and observed density fat

content range 2-6 per cent (with fat in the liquid state)


BS 3095-2:1988 Methods for determination of the freezing-point depression of milk -- Recommendations

for the interpretation of the freezing-point

depression of herd milk


BS 1743-6.1:1983 Methods for analysis of dried milk and dried

milk products. Assessment of the heat class

of dried milk -- Heat number method (reference method)


BS 1743-4:1980 Methods for analysis of dried milk and dried milk products -- Determination of the

dispersibility and the wetting time of instant

dried milk


BS 1741-6.1:1990 Methods for chemical analysis of liquid milk

and cream. Determination of casein nitrogen




and cream. Determination of casein nitrogen content of liquid milk -- Routine method



of 148 January 2016


Outcome

BS 4938-2P:1982 Dirt content of milk -- Photographic

standards for the method for the determination of visible dirt content of milk

(rapid method)


BS 1741-5.1:1988 Methods for chemical analysis of liquid milk and cream. Determination of the nitrogen



BS 1741-5.2:1990 Methods for chemical analysis of liquid milk and cream. Determination of the nitrogen

content of liquid milk -- Routine method


BS 1743-1:1986 Methods for analysis of dried milk and dried milk products -- General introduction,

including preparation of laboratory samples


BS 1741-10.1:1989 Methods for chemical analysis of liquid milk and cream. Determination of titratable acidity

-- Method for liquid milk



and cream. Determination of titratable acidity

-- Method for cream


BS 1741-1:1987 Methods for chemical analysis of liquid milk

and cream -- General introduction including

preparation of samples


BS 1742-1:1990 Methods for chemical analysis of condensed

milks -- General introduction, including preparation of test samples



and cream. Determination of lactose content -- Reference method



and cream. Determination of lactose content -- Routine method



and cream -- Determination of chloride content of liquid milk


BS 1743-19:1985 Methods for analysis of dried milk and dried

milk products -- Determination of scorched particles content


BS 1742-5.1:1991 Methods for chemical analysis of condensed

milks. Determination of nitrogen content -- Reference method


BS 770-2:1976 Methods for chemical analysis of cheese -- Determination of water content (reference

and routine methods)


BS 1741-11:1989 Methods for chemical analysis of liquid milk and cream -- Detection of

detergent/disinfectant residues


BS 1742-5.2:1991 Methods for chemical analysis of condensed milks. Determination of nitrogen content --

Routine method


BS 734-1:1973 Measurement of the density of milk using a hydrometer -- Specification for hydrometers

for use in milk


BS 5272:1975 Method for simultaneous routine determination of the water contents of a

batch of dried milk samples



of 148 January 2016


Outcome


and cream -- Determination of ash from liquid milk


BS 3095-1.2:1988 Methods for determination of the freezing-

point depression of milk. Methods -- Hortvet method


BS 770-8:1987 Methods for chemical analysis of cheese --

Determination of nitrogen content (reference method)


BS 1742-4:1991 Methods for chemical analysis of condensed

milks -- Determination of ash from condensed milks


BS 4938-2:1982 Dirt content of milk -- Method for the

determination of visible dirt content (rapid method)


BS 6248-1:1982 Caseins and caseinates -- General introduction, including preparation of

laboratory samples


BS 6248-6:1982 Caseins and caseinates -- Method for determination of lactose content



BS 3095-3:1981 Methods for determination of the freezing-point depression of milk -- Storage of

samples


BS 4938-1:1982 Dirt content of milk -- Method for the determination of dirt content (reference

method)


BS 5086-4:1985 Analysis of butter -- Method for determination of salt content (reference

method)


BS 5086-3:1984 Analysis of butter -- Method for determination of water content (routine

method)


BS 5086-1:1984 Analysis of butter -- General introduction

including preparation of samples


BS 5086-7:1991 Analysis of butter -- Method for determination of pH of butter serum


BS 770-5:1976 Methods for chemical analysis of cheese --

Determination of pH value


BS 734-2:1959 Measurement of the density of milk using a

hydrometer -- Methods


BS 770-1:1986 Methods for chemical analysis of cheese -- General introduction


BS 1743:1968 Methods for analysis of dried milk and dried

milk products


BS 4401-4:1970 Methods of test for meat and meat products

-- Determination of total fat content


BS 4401-7:1976 Methods of test for meat and meat products -- Determination of nitrate content


BS 4401-8:1976 Methods of test for meat and meat products

-- Determination of nitrite content


BS 4285-3.9.2:1992 Microbiological examination for dairy

purposes. Methods for detection and/or

enumeration of specific groups of microorganisms. Detection of Salmonella --

Screening method using electrical conductance



of 148 January 2016


Outcome

BS 4285-3.4.2:1989 Microbiological examination for dairy

purposes. Methods for detection and/or enumeration of specific groups of

microorganisms. Enumeration of lipolytic

microorganisms -- Tributyrin agar method


BS 4285-3.5:1988 Microbiological examination for dairy

purposes. Methods for detection and/or

enumeration of specific groups of microorganisms -- Enumeration of proteolytic

microorganisms



purposes. Methods of general application for

enumeration of microorganisms -- Enumeration of bacteria by direct microscopic

counts


BS 4285-3.2:1991 Microbiological examination for dairy purposes. Methods for detection and/or

enumeration of specific groups of microorganisms -- Enumeration of

thermoduric bacteria


BS 5763-5:1981 Methods for microbiological examination of food and animal feeding stuffs --

Enumeration of micro-organisms. Colony count at 30$0DC (surface plate technique)



purposes. Ancillary methods -- Test for inhibitory substances


BS 1722-9:2006 Fences -- Specification for mild steel (low

carbon steel) fences with round or square verticals and flat horizontals


BS 1722-17:2006 Fences -- Specification for electric security

fences. Design, installation and maintenance


BS 1722-8:2006 Fences -- Specification for mild steel (low

carbon steel) continuous bar fences and

hurdles


BS 1722-18:2011 Fences -- Specification for free-standing

temporary steel mesh perimeter fencing panels

B/201 current

BS 1722-10:2006 Fences -- Specification for anti-intruder

fences in chain link and welded mesh


BS 1722-5:2006 Fences -- Specification for close-boarded fences and wooden palisade fences


BS 1722-2:2006 Fences -- Specification for strained wire and wire mesh netting fences


BS 1722-11:2006 Fences -- Specification for prefabricated

wood panel fences


BS 1722-14:2006 Fences -- Specification for open mesh steel panel fences


BS 1722-7:2006 Fences -- Specification for wooden post and rail fences


BS 1722-12:2006 Fences -- Specification for steel palisade

fences


BS 1722-1:2006 Fences -- Specification for chain link fences B/201 confirmed (2011)

BS 5709:2006 Gaps, gates and stiles. Specification B/201 confirmed (2011)


of 148 January 2016


Outcome

BS 8103-1:2011 Structural design of low-rise buildings --

Code of practice for stability, site investigation, foundations, precast concrete

floors and ground floor slabs for housing

B/204 current

BS 5395-2:1984 Stairs, ladders and walkways -- Code of practice for the design of helical and spiral

stairs


BS 4592-1:2006 Industrial type flooring and stair treads -- Metal open bar gratings. Specification


BS 5395-4:2011 Code of practice for the design of stairs for

limited access

B/208 current

BS 6180:2011 Barriers in and about buildings. Code of

practice

B/208 current

BS 4592-5:2006 Industrial type flooring and stair treads -- Solid plates in metal and glass reinforced

plastics (GRP). Specification


BS 4592-4:2006 Industrial type flooring and stair treads -- Glass reinforced plastics (GRP) open bar

gratings. Specification


BS 4592-2:2006 Industrial type flooring and stair treads -- Expanded metal gratings. Specification


BS 7370-1:1991 Grounds maintenance -- Recommendations for establishing and managing grounds

maintenance organizations and for design

considerations related to maintenance


BS 7370-3:1991 Grounds maintenance -- Recommendations

for maintenance of amenity and functional

turf (other than sports turf)



for the maintenance of hard areas (excluding

sports surfaces)



for maintenance of soft landscape (other than amenity turf)


BS 4428:1989 Code of practice for general landscape

operations (excluding hard surfaces)


BS 7370-5:1998 Grounds maintenance -- Recommendations for the maintenance of water areas


PD 6682-5:2005 Aggregates -- Lightweight aggregates for bituminous mixtures and surface treatments

and for unbound and bound applications.

Guidance on the use of BS EN 13055-2


PD 6682-4:2003 Aggregates -- Lightweight aggregates for

concrete, mortar and grout. Guidance on the

use of BS EN 13055-1


BS 812-104:1994 Testing aggregates -- Method for qualitative

and quantitative petrographic examination of aggregates


BS 812-103.2:1989 Testing aggregates. Method for

determination of particle size distribution -- Sedimentation test



determination of alkali-silica reactivity. Concrete prism method



determination of the polished-stone value



of 148 January 2016


Outcome

BS 812-109:1990 Testing aggregates -- Methods for

determination of moisture content


PD 6682-9:2003 Aggregates -- Guidance on the use of European test method standards



determination of soundness


BS 5834-4:2011 Surface boxes, guards and underground

chambers for the purposes of utilities -- Specification for utility chambers

B/504 current

BS 5834-2:2011 Surface boxes, guards and underground

chambers for the purposes of utilities -- Specification for surface boxes

B/504 current

BS 8542:2011 Calculating domestic water consumption in

non-domestic buildings. Code of practice

B/504 current

BS 1566-

1:2002+A1:2011

Copper indirect cylinders for domestic

purposes -- Open vented copper cylinders.


B/504/-/10 current

BS 7942:2011 Thermostatic mixing valves for use in care

establishments. Requirements and test

methods

B/504/-/8 current

BS 8525-2:2011 Greywater systems -- Domestic greywater

treatment equipment. Requirements and test methods

B/505/50 current

BS 6999:1989 Specification for vitreous-enamelled low-

carbon-steel flue pipes, other components and accessories for solid-fuel-burning

appliances with a rated output of 45 kW

B/506 current

BS 41:1973 Specification for cast iron spigot and socket flue or smoke pipes and fittings

B/506 current

BS 567:1973 Specification for asbestos-cement flue pipes

and fittings, light quality

B/506 current

BS 835:1973 Specification for asbestos-cement flue pipes

and fittings, heavy quality

B/506 current

BS 7533-12:2006 Pavements constructed with clay, natural stone or concrete pavers -- Guide to the

structural design of trafficked pavements

constructed on a bound base using concrete paving flags and natural stone slabs


BS 7533-4:2006 Pavements constructed with clay, natural stone or concrete pavers -- Code of practice

for the construction of pavements of precast

concrete flags or natural stone slabs


BS 1703:2005 Refuse chutes and hoppers. Specification B/508/1 confirmed (2011)

BS 792:1973 Specification for mild steel dustbins B/508/1 confirmed (2011)

BS 6779-4:1999 Highway parapets for bridges and other

structures -- Specification for parapets of reinforced and unreinforced masonry

construction


BS 1924-1:1990 Stabilized materials for civil engineering purposes -- General requirements, sampling,

sample preparation and tests on materials before stabilization

B/510 current

BS 1924-2:1990 Stabilized materials for civil engineering

purposes -- Methods of test for cement-stabilized and lime-stabilized materials

B/510 current


of 148 January 2016


Outcome

BS 598-1:2011 Sampling and examination of bituminous

mixtures for roads and other paved areas -- Methods for the measurement of the rate of

spread of coated chippings and the

temperature of bituminous mixtures using non-contact temperature-measuring devices

and for the assessment of the compaction performance of a roller

B/510/1 current

BS 434-1:2011 Bitumen road emulsions -- Specification for

anionic bitumen road emulsions

B/510/19 current

BS 3247:2011 Specification for salt for spreading on

highways for winter maintenance

B/510/21 current

BS 7941-1:1999 Methods for measuring the skid resistance of pavement surfaces -- Side-way force

coefficient routine investigation machine

B/510/5 replaced by BS 7941-1:2006

BS 6770:1988 Guide for exterior colours for park homes (mobile homes), holiday caravans and

transportable accommodation units


BS 6767-1:1999 Transportable accommodation units -- Recommendations for design and

construction of the basic unit


BS 6164:2011 Code of practice for health and safety in tunnelling in the construction industry

B/513 current

BS 6187:2011 Code of practice for full and partial demolition

B/513 current

BS 4550-3.4:1978 Methods of testing cement. Physical tests --

Strength tests

B/516/12 replaced by BS EN

196-1:1995 as it is quoted in other

standards.

Partially replaced by BS 1881-

131:1998

BS 1881-119:2011 Testing concrete -- Method for determination of compressive strength using portions of

beams broken in flexure (equivalent cube method)

B/517 current

BS 8000-2.1:1990 Workmanship on building sites. Code of

practice for concrete work -- Mixing and transporting concrete

B/517 partially replaced

by BS 8000-0:2014

BS 1881-113:2011 Testing concrete -- Method for making and

curing no-fines test cubes

B/517 current

BS 1881-129:2011 Testing concrete -- Method for determination

of density of partially compacted semi-dry fresh concrete

B/517/1 current

BS 1881-122:2011 Testing concrete -- Method for determination

of water absorption

B/517/1 current

BS 8443:2005 Specification for establishing the suitability of special purpose concrete admixtures


BS 6319-3:1990 Testing of resin and polymer/cement compositions for use in construction --

Methods for measurement of modulus of

elasticity in flexure and flexural strength


BS 6319-6:1984 Testing of resin and polymer/cement

compositions for use in construction --

Method for determination of modulus of elasticity in compression



of 148 January 2016


Outcome

BS 6319-2:1983 Testing of resin and polymer/cement

compositions for use in construction -- Method for measurement of compressive

strength


BS 1990-1:1984 Wood poles for overhead power and telecommunication lines -- Specification for

softwood poles


BS 4978:2007+A1:201

1

Visual strength grading of softwood. Specification

B/518 current

BS 5756:2007+A1:201

1

Visual strength grading of hardwood. Specification

B/518 current

BS 6206:1981 Specification for impact performance requirements for flat safety glass and safety

plastics for use in buildings

B/520 partially replaced by BS EN

12600:2002

BS 6262:1982 Code of practice for glazing for buildings B/520/4 partially replaced

by Parts 1-4 and

6-7 of BS 6262. It will be withdrawn

on publication of BS 6262-5

BS 4485-4:1996 Water cooling towers -- Code of practice for

structural design and construction


BS 4485-3:1988 Water cooling towers -- Code of practice for

thermal and functional design


BS 4485-2:1988 Water cooling towers -- Methods for performance testing


PD 6688-1-1:2011 Recommendations for the design of

structures to BS EN 1991-1-1

B/525/1 current

PD 6688-2:2011 Background to the National Annex to BS EN 1991-2 -- Traffic loads on bridges

B/525/10 current

CP 118:1969 The structural use of aluminium B/525/9 replaced by BS 8118-1:1991 and

BS 8118-2:1991

PD 6694-1:2011 Recommendations for the design of structures subject to traffic loading to BS EN

1997-1:2004

B/526 current

BS 22475-3:2011 Geotechnical investigation and testing. Sampling methods and groundwater

measurements -- Conformity assessment of enterprises and personnel by third party

B/526/3 current

BS 22475-2:2011 Geotechnical investigation and testing.

Sampling methods and groundwater measurements -- Qualification criteria for

enterprises and personnel

B/526/3 current

BS 1377-2:1990 Methods of test for soils for civil engineering purposes -- Classification tests

B/526/3 partially replaced by BS EN ISO

17892-2:2014

BS 8006-2:2011 Code of practice for strengthened/reinforced soils -- Soil nail design

B/526/4 current

BS 459:1988 Specification for matchboarded wooden door

leaves for external use



of 148 January 2016


Outcome

BS 8000-11:2011 Workmanship on building sites -- Internal

and external wall and floor tiling. Ceramic and agglomerated stone tiles, natural stone

and terrazzo tiles and slabs, and mosaics.

Code of practice


by BS 8000-0:2014

BS 2972:1989 Methods of test for inorganic thermal

insulating materials


by BS EN 13467

to BS EN 13472:2001

BS 8201:2011 Code of practice for installation of flooring of

wood and wood-based panels

B/543 current

BS 8481:2006 Design, preparation and application of

internal gypsum, cement, cement and lime

plastering systems. Specification


BS 8298:1994 Code of practice for design and installation of

natural stone cladding and lining

B/545 replaced by BS

8298 Parts 1 to 4

BS 6925:1988 Specification for mastic asphalt for building and civil engineering (limestone aggregate)


BS 5284:1993 Methods of sampling and testing mastic

asphalt used in building and civil engineering


CP 102:1973 Code of practice for protection of buildings

against water from the ground


by BS 8102:1990 and BS 8215:1991

BS 2832:1957 Specification for hot applied damp resisting

coatings for solums


BS 743:1970 Specification for materials for damp-proof courses

B/546 partially replaced by BS 6398:1983,

BS 6515:1984 and BS 8215:1991

BS 8218:1998 Code of practice for mastic asphalt roofing B/546 confirmed (2011)

BS 8449:2005 Building and construction sealants with

movement accommodation factors greater than 25%. Method of test for determination

of adhesion/cohesion properties at variable temperatures


BS 3712-2:1973 Building and construction sealants -- Methods

of test for seepage, staining, shrinkage, shelf life and paintability



of test for application life, skinning properties and tack-free time



of test for homogeneity, relative density and penetration


BS 3712-4:1991 Building and construction sealants -- Method of test for adhesion in peel


BS 5502-40:2005 Buildings and structures for agriculture --

Code of practice for design and construction of cattle buildings


BS 5502-

31:1995+A1:2011

Buildings and structures for agriculture --

Guide to the storage and handling of waste


BS 5502-11:2005 Buildings and structures for agriculture --

Guide to regulations and sources of

information



of 148 January 2016


Outcome

PD 6446:1970 Recommendations for the co-ordination of

dimensions in building. Combinations of sizes


BS 6750:1986 Specification for modular coordination in building


BS 5606:1990 Guide to accuracy in building B/554 confirmed (2011)

BS 8541-2:2011 Library objects for architecture, engineering and construction -- Recommended 2D

symbols of building elements for use in

building information modelling

B/555 current

BS 8220-3:2004 Guide for security of buildings against crime -

- Storage, industrial and distribution premises


BS 8220-1:2000 Guide for security of buildings against crime -- Dwellings


BS 2853:2011 Specification for the testing of steel overhead

runway beams for hoist blocks

CB/203 current

BS 8204-

3:2004+A2:2011

Screeds, bases and in situ floorings --

Polymer modified cementitious levelling

screeds and wearing screeds. Code of practice

CB/300 current

BS 8204-5:2004+A1:2011

Screeds, bases and in situ floorings -- Mastic asphalt underlays and wearing surfaces.

Code of practice

CB/300 current

BS 8204-4:2004+A1:2011

Screeds, bases and in situ floorings -- Cementitious terrazzo wearing surfaces.

Code of practice

CB/300 current

BS 8204-2:2003+A2:2011

Screeds, bases and in situ floorings -- Concrete wearing surfaces. Code of practice

CB/300 current

BS 8204-7:2003 Screeds, bases and in-situ floorings --

Pumpable self-smoothing screeds. Code of practice


BS 8534:2011 Construction procurement policies, strategies

and procedures. Code of practice

CB/500 current

BS 8533:2011 Assessing and managing flood risk in

development. Code of practice

CB/501 current

BS 6349-7:1991 Maritime structures -- Guide to the design and construction of breakwaters


BS 6349-5:1991 Maritime structures -- Code of practice for

dredging and land reclamation


BS 5726:2005 Microbiological safety cabinets. Information

to be supplied by the purchaser to the

vendor and to the installer, and siting and use of cabinets. Recommendations and

guidance


BS 2588-2:1992 Portable sanitary pans for use in healthcare

establishments -- Specification for reusable

pans for commode chairs


BS 3221-6:1987 Medicine measures -- Specification for free-

standing plastics medicine measuring spoons

of 5 mL capacity


BS 2588-1:1992 Portable sanitary pans for use in healthcare

establishments. -- Specification for reusable bed pans


BS 3221-7:1995 Medicine measures -- Specification for oral

syringes delivering doses up to and including 5 ml



of 148 January 2016


Outcome

BS 1823:1973 Specification for stainless steel hollow-ware

for use in hospital operating-theatres and wards


BS 3221-1:1985 Medicine measures -- Specification for

medicine measures of 50 ml total graduated capacity


BS 5452:1977 Specification for hospital hollow-ware made

of plastics material


BS 7088:1989 Specification for pneumatic tourniquet

equipment


BS 3215:1995 Specification for reusable portable urinals CH/100 confirmed (2011)

BS 5402:1976 Specification for patient trolleys CH/100 confirmed (2011)

BS 8447:2005 Anaesthetic and respiratory equipment. Hook-on fittings for the attachment of

vaporizers to an anaesthetic gas delivery device

CH/121/1 confirmed (2011)

BS 8532:2011 Terminal units for high flow anaesthetic gas

scavenging systems. Specification for probes and type-specific connection points

CH/121/6 current

BS 7254-5:1990 Orthopaedic implants -- Specification for

production of castings made of cobalt-chromium-molybdenum alloy


BS 7251-1:1990 Orthopaedic joint prostheses -- Specification

for general requirements


BS 7254-2:1990 Orthopaedic implants -- Specification for

general requirements for materials and finish


BS 8432:2005 Spinal orthoses. Guide to design CH/168 confirmed (2011)

BS 5194-2:1989 Surgical instruments -- Specification for instruments with pivot joints (excluding

cutting instruments)


BS 5194-4:1985 Surgical instruments -- Specification for

scissors, shears and other jointed cutting

instruments


BS 2982:1992 Specification for materials and packaging of

surgical scalpels with detachable blades


BS 5194-3:1985 Surgical instruments -- Specification for dissecting forceps


BS 4274-1:2003 Visual acuity test types -- Test charts for

clinical determination of distance visual acuity. Specification


BS 3970-2:1991 Sterilizing and disinfecting equipment for

medical products -- Specification for steam sterilizers for aqueous fluids in sealed rigid

containers


BS 3970-5:1990 Sterilizing and disinfecting equipment for medical products -- Specification for low

temperature steam disinfectors


BS 2646-1:1993 Autoclaves for sterilization in laboratories --

Specification for design, construction, safety

and performance



Methods of test for function and performance


BS 2646-2:1990 Autoclaves for sterilization in laboratories -- Guide to planning and installation



Guide to safe use and operation



of 148 January 2016


Outcome


Guide to maintenance


BS 8599-1:2011 Workplace first aid kits -- Specification for the contents of workplace first aid kits

CH/240 current

BS 5724-3.26:1990 Medical electrical equipment. Particular

requirements for performance -- Method for declaring parameters for ultrasonic diagnostic

equipment using test objects


BS 6196:1989 Specification for sterile epidural catheters

and introducer needles for single use


BS 6043-2.12:1994 Methods of sampling and test for carbonaceous materials used in aluminium

manufacture. Electrode coke. --

Determination of particle size distribution of fine coke

CII/24 confirmed (2011)

BS 6043-1.7:1988 Methods of sampling and test for carbonaceous materials used in aluminium

manufacture. Electrode pitch --

Determination of apparent density (buoyancy method)


BS 6043-1.12:1994 Method of sampling and test for

carbonaceous materials used in aluminium manufacture. Electrode pitch. --

Determination of mesophase content


BS 5072-1:1974 Methods of test for sodium fluoride for

industrial use -- Determination of water-

insoluble matter


BS 4993-1:1974 Methods of test for aluminium fluoride for

industrial use -- Determination of fluorine

content



industrial use -- Determination of silica

content



industrial use -- Determination of moisture content



industrial use -- Determination of fluorine content



industrial use -- Determination of iron content


BS 4140-0:1986 Methods of test for aluminium oxide --



BS 5050:1974 Methods of test for cryolite CII/24 confirmed (2011)

BS 5688-0:1986 Methods of test for orthoboric acid (boric

acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude

sodium borates for industrial use -- General

introduction


BS 6392-3:1983 Testing of ethanol for industrial use --

Method for determination of carbonyl

compounds content present in moderate amounts (titrimetric method)



of 148 January 2016


Outcome

BS 6092-11:1981 Methods of sampling and test for sodium and

potassium silicates for industrial use -- Determination of chloride content of sodium

metasilicate


BS 6392-7:1983 Testing of ethanol for industrial use -- Method for determination of methanol

content [0.10% (V/V) to 1.50% (V/V)]

(visual colorimetric method)


BS 6092-12:1981 Methods of sampling and test for sodium and

potassium silicates for industrial use -- Limit test for sulphate content of sodium

metasilicate


BS 6392-2:1983 Testing of ethanol for industrial use -- Method for determination of carbonyl

compounds content present in small amounts




Method for determination of methanol content [0.01% (V/V) to 0.20% (V/V)]



BS 7319-12:1990 Analysis of sodium chloride for industrial use -- Methods for determination of anti-caking

additives content of salt for food use


BS 6092-10:1981 Methods of sampling and test for sodium and potassium silicates for industrial use --

Determination of matter insoluble in water


BS 6392-1:1983 Testing of ethanol for industrial use -- Method for detection of alkalinity or

determination of acidity to phenolphthalein


BS 6075-14:1981 Methods of sampling and test for sodium hydroxide for industrial use -- Determination

of matter insoluble in water


BS 6092-0:1981 Methods of sampling and test for sodium and potassium silicates for industrial use --



BS 6075-12:1981 Methods of sampling and test for sodium

hydroxide for industrial use -- Determination

of copper content


BS 1595-1:1986 Propan-2-ol (isopropyl alcohol) for industrial

use -- Specification for propan-2-ol (isopropyl

alcohol)



carbonate for industrial use -- Determination of copper content



carbonate for industrial use -- General introduction



hydroxide for industrial use -- General introduction



Method for determination of aldehydes content



Method for determination of permanganate time


BS 6392-8:1983 Testing of ethanol for industrial use -- Method for determination of esters content



of 148 January 2016


Outcome


Method of test for miscibility with water


BS 1941:1993 Specification for 4-methylpentan-2-one (isobutyl methyl ketone) for industrial use


BS 1595-2:1984 Propan-2-ol (isopropyl alcohol) for industrial

use -- Methods of test


BS 1940:1987 Specification for butanone (ethyl methyl

ketone) for industrial use


BS 2713:1966 Specification for 2-ethoxyethanol (ethylene glycol monoethyl ether)


BS 662-3:1979 Carbon disulphide for industrial use --

Additional methods of test


BS 576-2:1988 Acetic acid for industrial use -- Methods of

test for acetic acid


BS 6376-3:1989 Reagents for chemical analysis -- Specifications (second series)


BS 576-1:1988 Acetic acid for industrial use. -- Specification

for acetic acid





BS 508-1:1986 Butan-1-ol for industrial use -- Specification for butan-1-ol


BS 3993:1966 Specification for hydrochloric acid,

commercial types 1 and 2


BS 506-1:1987 Methanol for industrial use. -- Specification

for methanol


BS 509-1:1987 Acetone for industrial use -- Specification for acetone


BS 5962:1980 Specifications for naphthalene (including test

methods)


BS 662-1:1979 Carbon disulphide for industrial use. --

Specification


BS 1835:1991 Specification for 2-ethylhexan-1-ol for industrial use


BS 1994:1993 Specification for dichloromethane (methylene

chloride)


BS 4583:1991 Methods of test for higher alcohols for

industrial use


BS 3674:1981 Specification for sodium carbonate (technical grades)


BS 4130:1984 Specification for sodium hydroxide (technical

grades)


BS 4105:1990 Specification for liquid carbon dioxide,

industrial


BS 4774:1972 Methods of test for chloroform for industrial use


BS 508-2:1984 Butan-1-ol for industrial use -- Methods of

test


BS 551:1990 Specification for butyl acetate for industrial

use


BS 553:1990 Specification for ethyl acetate for industrial use


BS 3591:1985 Specification for industrial methylated spirits CII/26 confirmed (2011)

BS 506-2:1984 Methanol for industrial use -- Methods of test CII/26 confirmed (2011)


Methods of test for formic acid CII/26 confirmed (2011)


of 148 January 2016


Outcome

BS 509-2:1984 Acetone for industrial use -- Methods of test CII/26 confirmed (2011)

BS 507:1985 Specification for ethanol for industrial use CII/26 confirmed (2011)

BS 579:1957 Specification for diethyl ether (technical) CII/26 confirmed (2011)

BS 5634:1978 Methods of test for potassium hydroxide CII/26 confirmed (2011)

BS 4835:1973 Methods of test for plasticizer esters CII/26 confirmed (2011)

BS 4366:1993 Specification for industrial nitrogen CII/26 confirmed (2011)

BS 1834:1968 Specification for isopropyl acetate CII/26 confirmed (2011)

BS 4364:1993 Specification for industrial oxygen CII/26 confirmed (2011)

BS 2068:1970 Specification for acetic anhydride CII/26 confirmed (2011)

BS 3984:1982 Specification for sodium silicates CII/26 confirmed (2011)

BS 549:1970 Specification for diacetone alcohol CII/26 confirmed (2011)

BS 3947:1976 Specification for liquid chlorine CII/26 confirmed (2011)

BS 4341:1968 Methods of test for formic acid CII/26 confirmed (2011)

BS 552:1970 Specification for amyl acetate CII/26 confirmed (2011)

BS 4427-14:1989 Methods of test for sodium tripolyphosphate

(pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate)

for industrial use -- Condensed phosphates for industrial use (including foodstuffs):

determination of chloride content


BS 4427-3:1989 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium

pyrophosphate (tetrasodium pyrophosphate)

for industrial use -- Condensed phosphates for industrial use (including foodstuffs):

determination of iron content



(pentasodium triphosphate) and sodium

pyrophosphate (tetrasodium pyrophosphate) for industrial use -- Separation by column

chromatography and determination of the different phosphate forms




for industrial use -- Determination of matter insoluble in water in sodium tripolyphosphate




for industrial use -- Estimation of

pyrophosphate content of sodium pyrophosphate




for industrial use -- Determination of particle size distribution




for industrial use -- Determination of loss on ignition



of 148 January 2016


Outcome

BS 6829-2.1:1988 Analysis of surface active agents (raw

materials). Alkane sulphonates -- Method for determination of total alkaline sulphonates

content


BS 3762-3.10:1989 Analysis of formulated detergents -- Methods for determination of short-chain

alkylbenzenesulphonates content


BS 3762-3.24:1988 Analysis of formulated detergents -- Method for determination of low molecular mass

alcohols content


BS 1715-2.4:1989 Analysis of soaps. Quantitative test methods -- Method for determination of free fatty

acids content


BS 3762-3.25:1989 Analysis of formulated detergents -- Methods for determination of water and volatile

matter content


BS 3762-4.1:1989 Analysis of formulated detergents -- Method

for determination of clear point of liquid

detergents



for estimation of carboxymethylcellulose

content



for determination of free formaldehyde content


BS 1715-2.9:1990 Analysis of soaps. Quantitative test methods.

-- Method for determination of EDTA content


BS 3762-3.14:1985 Analysis of formulated detergents -- Method for determination of carbonate content



for determination of chloride content



for determination of ammonia content


BS 3762-2:1989 Analysis of formulated detergents -- Qualitative test methods


BS 1545:1990 Specification for liquid toilet soap CII/34 confirmed (2011)

BS 1912:1990 Specification for soap flakes CII/34 confirmed (2011)

BS 1914:1990 Specification for toilet soap CII/34 confirmed (2011)

BS 4405:1990 Specification for liquid soap CII/34 confirmed (2011)

BS 1911:1990 Specification for hard soap CII/34 confirmed (2011)

BS 1913:1990 Specification for soft soap CII/34 confirmed (2011)

BS 7959-2:2000 Materials used for the control of liquid

spillages -- Determination of water repellency

or buoyancy for hydrophobic (oil sorbent) materials



meteorological precipitation data from a raingauge network -- Code of practice for

operating raingauges and managing precipitation data

CPI/113 current


meteorological precipitation data from a raingauge network -- Guide for the design,

development and review of a raingauge network

CPI/113 current


of 148 January 2016


Outcome

BS 1339-3:2004 Humidity -- Guide to the measurement of

humidity

CPI/29 confirmed (2011)

BS 8452:2010 Use of clamp-on (externally mounted) ultrasonic flow-metering techniques for fluid

applications. Guide

CPI/30/5 current

BS 1853-2:1995 Tubular fluorescent lamps for general lighting service -- Specification for lamps used in the

United Kingdom not included in BS EN 60081, BS EN 60901, BS EN 61195 and BS

EN 61199


BS 1376:1974 Specification for colours of light signals CPL/34/7 confirmed (2011)

BS 5415-2.2:Supplement No.

1:1986

Safety of electrical motor-operated industrial and commercial cleaning appliances.

Particular requirements -- Specification for type H industrial vacuum cleaners for dusts

hazardous to health


BS 4995:1973 Recommendations for measurement of the veiling glare index of lenses and optical

systems

CPW/172 confirmed (2011)

BS 4793:1972 Recommendations for specifying the optical performance of lenses for television cameras


BS 4779:1971 Recommendations for measurement of the optical transfer function of optical devices


BS 5109:1974 Glossary of terms used in assessing the

performance of optical devices and systems


BS 4301:1991 Recommendations for preparation of drawings for optical elements and systems


BS 5550-5.4.1:1986 Cinematography. Common to more than one gauge. Sound -- Code of Practice for the

identification of systems for synchronization

of unperforated audio tape with motion-picture film and videotape


BS 5550-6.4:1980 Cinematography. Television usage --

Recommendations for the density range, contrast and colour balance of films and

slides for colour television


BS 5550-7.5.4:1981 Cinematography. Production and presentation. Film and television location

lighting -- Specification for single pole high current plugs and socket connectors

CPW/4 current

BS 3944-1:1992 Colour and diffusion filter material for

theatre, television and similar entertainment purposes. -- Specification for flammability

and dimensional stability


BS 7909:2011 Code of practice for temporary electrical systems for entertainment and related

purposes

CPW/4 current

BS 5577:1999 Specification for table cutlery with non-

metallic handles


BS 6748:1986+A1:201

1

Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware

and vitreous enamel ware

CW/29 current

BS 4034:1990 Specification for vitrified hotelware CW/29 confirmed (2011)

BS 5416:1990 Specification for china tableware CW/29 confirmed (2011)

BS 3788:1984 Specification for tin coated finish on culinary utensils



of 148 January 2016


Outcome

BS 7000-6:2005 Design management systems -- Managing

inclusive design. Guide

DES/1 confirmed (2011)

BS 5760-8:1998 Reliability of systems, equipment and components -- Guide to assessment of

reliability of systems containing software


PD 6663:2000 Guidelines to BS EN 12973. Value management. Practical guidance to its use

and intent


BS 2045:1965 Preferred numbers E/- confirmed (2011)

BS 2742M:1960 Miniature smoke chart EH/2/1 confirmed (2011)

BS 2742C:1957 Ringelmann chart EH/2/1 confirmed (2011)

BS 6068-2.18:1986 Water quality. Physical, chemical and

biochemical methods -- Methods for the determination of easily liberatable cyanide

EH/3/2 confirmed (2011)

BS 6068-2.34:1988 Water quality. Physical, chemical and

biochemical methods -- Method for the determination of the chemical oxygen

demand


BS 6068-2.17:1986 Water quality. Physical, chemical and biochemical methods -- Methods for

determination of total cyanide


BS 667:2005 Illuminance meters. Requirements and test methods

EL/1 confirmed (2011)

BS 7920:2005 Luminance meters. Requirements and test methods

EL/1 confirmed (2011)

BS 8456:2005 Code of practice for design and installation of

directional sounder evacuation systems

EL/1/1 confirmed (2011)

BS 7827:2011 Code of practice for designing, specifying, maintaining and operating emergency sound

systems at sports venues

EPL/100 current

BS 6513-5:1987 Wideband cabled distribution systems --

Recommendations for one-way and

interactive data services


BS 7594:2011 Code of practice for audio-frequency

induction-loop systems (AFILS)

EPL/100 current

BS 6513-2:1984 Wideband cabled distribution systems -- Methods of measurement


BS 6513-1:1984 Wideband cabled distribution systems --

Glossary of terms


PD 60065:2001 Interpretation sheets for BS EN 60065:1998.

Audio, video and similar electronic apparatus.

Safety requirements

EPL/108 replaced by BS EN

60065:2002+A12:

2011

BS 7580-2:1997 Specification for the verification of sound

level meters -- Shortened procedure for type

2 sound level meters


BS 3539:1986 Specification for sound level meters for the

measurement of noise emitted by motor vehicles


BS 7580-1:1997 Specification for the verification of sound

level meters -- Comprehensive procedure


PD 6545:2005 Intended use of human head and ear simulators-guide


BS 9074 N007:1978 Detail specification for fixed polystyrene film dielectric extended foil capacitors.

Rectangular non-metallic case, unidirectional

terminations. Full plus additional assessment level

EPL/40X replaced by BS 9074 N007:1981,

due to existing

approvals


of 148 January 2016


Outcome

BS 9070-3:1970 Specification for fixed capacitors of assessed

quality: generic data and methods of test -- Tantalum electrolytic capacitors

EPL/40X replaced by BS

CECC 30800:1978, due

to existing

approvals

BS 9121:1988 Blank detail specification for radio

interference suppression filters of assessed

quality. Basic and full assessment levels

EPL/40X partially replaced

by BS EN

133000:1997

BS 9120:1988 Specification for radio interference

suppression filters of assessed quality: generic data and methods of test

EPL/40X partially replaced

by BS EN 133000:1997

BS 9210 N0009-

1:1978

Detail specification for radio frequency

connectors (series SMC) -- Full assessment level


BS 9210:1984 Specification for radio frequency connectors

of assessed quality: generic data and methods of test

EPL/46 replaced by BS

CECC 22000:1980 due to existing

approvals

BS 9210 N007-1:1976

Detail specification for radio frequency connectors (type SMB) -- Full assessment

level


BS 9220:1971 Specification for rigid waveguide tubing of assessed quality: generic data and methods

of test


BS 4319-1:1968 Methods of measurement of the electrical

properties of electronic tubes and valves

(excluding microwave devices) -- Essential conditions for measuring equivalent input

and output admittances


BS 4478:1969 Methods of measurement of intermodulation products in electronic tubes or valves

intended for use in colour television transposers


BS 448-2:1981 Dimensions of electronic tubes and valves --

Specification for dimensions of United Kingdom electronic tubes


BS 4789:1972 Specification for ceramic components for use

in envelopes for electronic tubes


BS 6600-10:1985 Outline dimensions of transformers and

inductors for use in telecommunication and

electronic equipment -- Specification for the outline dimensions of transformers and

inductors using the Q range of C-cores


BS 6600-1:1987 Outline dimensions of transformers and

inductors for use in telecommunication and

electronic equipment -- Specification for the outline dimensions of transformers and

inductors using YEI-1 laminations


BS 9751 N0001:1980

Detail specification for fixed insulated (unshielded) radio frequency inductors. Wire

wound on ferrite, iron dust or phenolic cylindrical former. Full assessment level


BS 5347:1976 Specification for silicon-iron strip-wound

cores for use in transformers and inductors for telecommunications and electronic

equipment



of 148 January 2016


Outcome

BS 9753:1986 Sectional specification for variable r.f. type

inductors of assessed quality for use in electronic equipment for capability approval


BS 9721:1985 Sectional specification for signal transformers

of assessed quality for use in electronic equipment for capability approval


BS 9727:1985 Sectional specification for power

transformers of assessed quality for use in electronic equipment for capability approval


BS 9733:1985 Sectional specification for pulse transformers

of assessed quality for use in electronic equipment for capability approval


BS 9734:1978 Sectional specification for pulse transformers

of assessed quality for use in electronic equipment: full assessment level


BS 9741:1986 Sectional specification for inductors of assessed quality for use in electronic

equipment for capability approval


BS 9751:1979 Blank detail specification for fixed insulated (unshielded) r.f. inductors at the full

assessment level


BS 2857:1976 Specification for nickel-iron transformer and choke laminations


BS 4309:1968 Methods of measuring the performance of

laboratory electric resistance furnaces


BS 2648:1955 Performance requirements for electrically-

heated laboratory drying ovens


BS 3224-1:1988 Lighting fittings for civil land aerodromes -- Specification for lighting units for use in

precision approach path indicator systems


BS 3224-4:1988 Lighting fittings for civil land aerodromes -- Specification for elevated lighting units


BS 3224-6:1988 Lighting fittings for civil land aerodromes --

Specification for obstacle lighting units


BS 4168-1:1981 Hexagon socket screws and wrench keys:

metric series -- Specification for hexagon

socket head cap screws

FME/9 replaced by BS EN

ISO 4762:1998

BS 7371-

6:1998+A1:2011

Coatings on metal fasteners -- Specification

for hot dipped galvanized coatings

FME/9 current

BS 3673-4:1977 Specification for spring retaining rings -- Carbon steel circlips - metric series


BS 7371-8:2011 Coatings on metal fasteners -- Specification

for sherardized coatings

FME/9 current

BS 3673-2:1965 Specification for spring retaining rings --

Carbon steel E clips


BS 3673-3:1968 Specification for spring retaining rings -- Carbon steel C clips


BS 4895:1981 Specification for semi-tubular rivets for

general purpose use


BS 8572:2011 Procurement of facility-related services.

Guide

FMW/1 current

BS 5839-9:2011 Fire detection and fire alarm systems for buildings -- Code of practice for the design,

installation, commissioning and maintenance of emergency voice communication systems

FSH/12/5 current


of 148 January 2016


Outcome

BS 5306-1:2006 Code of practice for fire extinguishing

installations and equipment on premises -- Hose reels and foam inlets


BS 6266:2011 Fire protection for electronic equipment

installations. Code of practice

FSH/14 current

BS 5306-0:2011 Fire protection installations and equipment on premises -- Guide for selection of installed

systems and other fire equipment

FSH/18 current

BS 9252:2011 Components for residential sprinkler systems.

Specification and test methods for residential

sprinklers

FSH/18/2 current

BS 7944:1999 Type 1 heavy duty fire blankets and type 2

heavy duty heat protective blankets


BS 7867:1997 Specification for portable fire extinguishers for use in aircraft



structures -- Method of test to determine the classification of the surface spread of flame

of products


BS 476-23:1987 Fire tests on building materials and structures -- Methods for determination of

the contribution of components to the fire resistance of a structure



structures -- Methods for determination of the fire resistance of loadbearing elements of

construction


BS 476-31.1:1983 Fire tests on building materials and structures -- Method of measurement under

ambient temperature conditions


PD 7974-6:2004 The application of fire safety engineering priciples to fire safety design of buildings --

Human factors. Life safety strategies. Occupant evacuation, behaviour and

condition (Sub-system 6)


PD 7974-1:2003 Application of fire safety engineering principles to the design of buildings --

Initiation and development of fire within the enclosure of origin (Sub-system 1)


PD 7974-4:2003 Application of fire safety engineering

principles to the design of buildings -- Detection of fire and activation of fire

protection systems. (Sub-system 4)


PD 7974-3:2011 Application of fire safety engineering principles to the design of buildings --

Structural response and fire spread beyond the enclosure of origin

FSH/24 current

PD 7974-0:2002 Application of fire safety engineering

principles to the design of buildings -- Guide to design framework and fire safety

engineering procedures


BS 4422:2005 Fire. Vocabulary FSH/9 confirmed (2011)

BS 4875-7:2006 Strength and stability of furniture -- Domestic and contract storage furniture. Performance

requirements

FW/0/2 confirmed (2011)

BS 8480:2006 Medical devices. Chairs with electrically

operated support surfaces. Requirements

FW/0/2 current


of 148 January 2016


Outcome

BS

8509:2008+A1:2011

Childrens beds for domestic use. Safety

requirements and test methods

FW/0/2 current

BS 6807:2006 Methods of test for assessment of ignitability

of mattresses, upholstered divans and upholstered bed bases with flaming types of

primary and secondary sources of ignition


BS 5852-1:1979 Fire tests for furniture -- Methods of test for the ignitability by smokers' materials of

upholstered composites for seating


BS 5852-2:1982 Fire tests for furniture -- Methods of test for the ignitability of upholstered composites for

seating by flaming sources


BS 7176:2007+A1:201

1

Specification for resistance to ignition of upholstered furniture for non-domestic

seating by testing composites

FW/6 current

BS 5852:2006 Methods of test for assessment of the

ignitability of upholstered seating by

smouldering and flaming ignition sources


BS

7177:2008+A1:201

1

Specification for resistance to ignition of

mattresses, mattress pads, divans and bed

bases

FW/6 current

BS 10500:2011 Specification for an anti-bribery management

system (ABMS)

G/3 current

BS 4727-2:Group 12:1990

Glossary of electrotechnical, power, telecommunication, electronics, lighting and

colour terms. Terms particular to power engineering -- Telecontrol terminology


BS 2572:1990 Specification for phenolic laminated sheet

and epoxy cotton fabric laminated sheet

GEL/15 partially replaced

by BS EN 60893-3-4:1995

BS 3953:1990 Specification for synthetic resin bonded

woven glass fabric laminated sheet

GEL/15 partially replaced

by BS EN 60893-2:1995, BS EN

60893-3-3:1995, BS EN 60893-3-

6:1995 and BS EN

60893-3-7:1995

PD 2379:2005 Register of colours of manufacturers'

identification threads for electric cables and

cords. Tenth Edition


BS 7870-3.12:2011 LV and MV polymeric insulated cables for use

by distribution and generation utilities -- Specification for distribution cables of rated

voltage 0.6/1 kV. XLPE insulated combined

neutral and earth copper wire concentric cables with copper or aluminium conductors,

having low emission of smoke and corrosive gases when affected by fire

GEL/20/16 current



voltage 0.6/1 kV. XLPE insulated, copper wire waveform or helical concentric cables with

solid aluminium conductors, having low

emission of smoke and corrosive gases when affected by fire

GEL/20/16 current


of 148 January 2016


Outcome



voltage 0.6/1 kV. XLPE insulated split

concentric cables with copper or aluminium conductors, having low emission of smoke

and corrosive gases when affected by fire

GEL/20/16 current

BS 7870-3.11:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities --

Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated combined

neutral and earth copper wire concentric cables with copper or aluminium conductors

GEL/20/16 current



voltage 0.6/1 kV. XLPE insulated, copper wire

waveform concentric cables with solid aluminium conductors

GEL/20/16 current


Specification for distribution cables with

extruded insulation for rated voltages of 11 kV and 33 kV. Single-core 33 kV lead

sheathed cables

GEL/20/16 current


Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated split

concentric cables with copper or aluminium

conductors

GEL/20/16 current


by distribution and generation utilities -- Specification for distribution cables with

extruded insulation of rated voltages of 11 kV

to 33 kV. Single-core 11 kV to 33 kV cables

GEL/20/16 current


by distribution and generation utilities --

Specification for distribution cables with extruded insulation for rated voltages of 11

kV to 33 kV. Three-core 11 kV cables

GEL/20/16 current

BS 7870-5:2011 LV and MV polymeric insulated cables for use


Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV

for overhead distribution

GEL/20/16 current

BS 7870-2:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities --

Methods of test

GEL/20/16 current

BS 7870-1:2011 LV and MV polymeric insulated cables for use


General

GEL/20/16 current

BS 8436:2011 Electric cables. Specification for 300/500 V

screened electric cables having low emission

of smoke and corrosive gases when affected by fire, for use in walls, partitions and

building voids. Multicore cables

GEL/20/17 current


of 148 January 2016


Outcome

BS 7917:1999 Elastomer insulated fire resistant (limited

circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units.


GEL/20/6 confirmed (2011)

BS 6883:1999 Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units.


GEL/20/6 confirmed (2011)

BS 8435:2005 Small craft. Reserve flotation. Boats up to six metres length of hull

GME/33 confirmed (2011)

BS 5809:1980 Specification for safety and efficiency of the

gas heating equipment of commercial dishwashing machines


BS 1179-6:1980 Glossary of terms used in the gas industry --

Combustion and utilization including installation at consumers' premises


BS 5991:2006 Specification for indirect gas fired forced convection air heaters with rated heat inputs

greater than 330 kW but not exceeding 2

MW for industrial and commercial space heating. Safety and performance


GSE/20/4 confirmed (2011)

BS 5990:2006 Specification for direct gas-fired forced

convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2

MW for industrial and commercial space heating. Safety and performance

requirements (excluding electrical

requirements) (2nd family gases)

GSE/20/4 confirmed (2011)

BS 7461:1991 Specification for electrically operated

automatic gas shut-off valves fitted with

throughput adjusters, proof of closure switches, closed position indicator switches

or gas flow control


BS 6047-1:1981 Flame supervision devices for domestic, commercial and catering gas appliances --

Specification for heat sensitive type


BS 5986:1980 Specification for electrical safety and

performance of gas fired space heating

appliances with inputs 60 kW to 2 MW


BS 1552:1995 Specification for open bottomed taper plug

valves for 1st, 2nd and 3rd family gases up

to 200 mbar


BS 7462:1991 Specification for electrical safety of domestic

gas appliances


BS 2977:1958 Domestic lighting appliances for use with liquefied petroleum gases


BS 8660-1:2011 Gas-fired micro-cogeneration appliances of

rated thermal input not exceeding 70 kW net -- Specification for selection, installation,

inspection, commissioning, servicing and maintenance of Stirling engine micro-

cogeneration appliances

GSE/30 current

BS 6400-2:2006 Specification for installation, exchange, relocation and removal of gas meters with a

maximum capacity not exceeding 6 m$u3/h -- Medium pressure (2nd family gases)



of 148 January 2016


Outcome

BS 6644:2011 Specification for the installation and

maintenance of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8

MW (net) (2nd and 3rd family gases)

GSE/30 current

BS 6896:2011 Specification for installation and maintenance of gas-fired overhead radiant heaters for

industrial and commercial heating (2nd and

3rd family gases)

GSE/30 current

BS 6230:2011 Specification for installation of gas-fired

forced convection air heaters for commercial and industrial space heating (2nd and 3rd

family gases)

GSE/30 current

BS 7624:2004 Installation and maintenance of domestic direct gas-fired tumble dryers of up to 6 kW

heat input (2nd and 3rd family gases).

Specification

GSE/30/-/20

confirmed (2011)

BS 715:2005 Specification for metal flue boxes for gas-

fired appliances not exceeding 20 kW


BS 669-2:1997 Flexible hoses, end fittings and sockets for gas burning appliances -- Specification for

corrugated metallic flexible hoses, covers, end fittings and sockets for catering

appliances burning 1st, 2nd and 3rd family

gases


BS 7872:2011 Manned security services. Cash and valuables

in transit services (collection and delivery). Code of practice

GW/3 current

BS 8484:2011 Provision of lone worker device (LWD)

services. Code of practice

GW/3 current

BS 8523:2011 Management and operation of warden schemes. Code of practice

GW/3 current

BS 8549:2006 Security consultancy. Code of practice GW/3 confirmed (2011)

BS 1523-1:1967 Glossary of terms used in automatic controlling and regulating systems -- Process

and kinetic control

I/- confirmed (2011)

BS 4783-8:1994 Storage, transportation and maintenance of media for use in data processing and

information storage -- Recommendations for

4 mm and 8 mm helical scan tape cartridges

ICT/-/1 confirmed (2011)

BS 6475:1984 Specification for processor system bus

interface (Eurobus A)

ICT/-/1 confirmed (2011)

BS 6660-1:2005 Guide to setting up and maintaining micrographics and digital imaging units --

Micrographics

IDT/1 confirmed (2011)

BS 5261-1:2000 Copy preparation and proof correction -- Design and layout of documents

IDT/2 confirmed (2011)

BS 8538:2011 Specification for the provision of services relating to the commercialization of

intellectual property rights

IMS/1/1 current

BS 4633 and 4634:1970

Method for the determination of crystallizing point. Method for the determination of

melting point and/or melting range


BS 5443:1977 Recommendations for a standard layout for methods of chemical analysis by gas

chromatography


BS 2511:1970 Methods for the determination of water (Karl Fischer method)



of 148 January 2016


Outcome

BS 4-1:2005 Structural steel sections -- Specification for

hot-rolled sections


PD 970:2005 Wrought steels for mechanical and allied engineering purposes. Requirements for

carbon, carbon manganese and alloy hot worked or cold finished steels


PD 6635:1999 Non-alloy steel rod for drawing and/or cold

rolling. General purpose rod, rimmed and rimmed substitute low carbon steel rod, rod

for special applications. Requirements and tests


BS 4087:1989 Specification for copper-covered steel wire

for telephone and telegraph purposes


BS 4637:1970 Specification for carbon steel wire for coiled springs (bedding and seating)


BS 1429:1980 Specification for annealed round steel wire for general engineering springs


BS 182:1972 Specification for galvanized line-wire for

telephone and telegraph purposes


BS 4638:1970 Specification for carbon steel wire for zigzag and square-form springs


BS 1052:1980 Specification for mild steel wire for general engineering purposes


BS 7612:1993 Specification for non-circular steel wire for

mechanical springs


BS 183:1972 Specification for general purpose galvanized steel wire strand


BS 4102:1998 Specification for steel wire for general

fencing purposes


BS 2453:1973 Specification for steel wire for spokes ISE/106 confirmed (2011)

BS 3604-2:1991 Steel pipes and tubes for pressure purposes:

ferritic alloy steel with specified elevated temperature properties. -- Specification for

longitudinally arc welded tubes


BS 5383:1986 Specification for material identification of steel, nickel alloy and titanium alloy tubes by

continuous character marking and colour coding of steel tubes


PD 6525-1:1990 Elevated temperature properties for steels for

pressure purposes. -- Stress rupture properties


BS 6582:2000 Continuously hot-dip lead alloy (terne)

coated cold reduced carbon steel flat rolled products


BS 1640-1:1962 Specification for steel butt-welding pipe

fittings for the petroleum industry -- Wrought carbon and ferritic alloy steel fittings

ISE/110 partially replaced

by BS EN 10253-2:2007

PD 6484:1979 Commentary on corrosion at bimetallic

contacts and its alleviation

ISE/NFE/8 confirmed (2011)

BS 8440-2:2005 Health informatics. Medical digital imaging.

Profiles format -- Particular requirements for metadata profiles


BS 8441-2:2006 Health informatics. Medical digital imaging

profiles -- “M-IHE6-4.8MIS-CT” CT images stored


BS 8440-1:2005 Health informatics. Medical digital imaging.

Profiles format -- General principles



of 148 January 2016


Outcome

BS 8419-2:2005 Interoperability between metadata systems

used for learning, education and training -- Code of practice for the development of

interoperability between application profiles


BS 8419-1:2005 Interoperability between metadata systems used for learning, education and training --

Code of practice for the development of

application profiles


PD 7506:2005 Linking knowledge management with other

organizational functions and disciplines. A guide to good practice

KMS/1 confirmed (2011)

PD 7504:2005 Knowledge management in the public sector.

A guide to good practice


PD 7501:2003 Managing culture and knowledge. Guide to good practice


PD 7505:2005 Skills for knowledge working. A guide to good practice


PD 7503:2003 Introduction to knowledge management in

construction


PD 7502:2003 Guide to measurements in knowledge management


PD 7500:2003 Knowledge Management. Vocabulary KMS/1 confirmed (2010)

BS 6940-2:1989 Total Access Communication System (T.A.C.S) -- Specification for performance

and tests of the signalling system of mobile

stations

L/-/99 confirmed (2011)

BS 6940-1:1989 Total Access Communication System

(T.A.C.S) -- Specification for performance requirements for mobile stations


BS 1117-2:1964 Specification for bare fine resistance wire for

precision electrical equipment -- Metric units


BS 3467:1962 Method of test for temperature coefficient of resistance of alloy wire for precision resistors


BS 3466:1962 Methods of test for resistance per unit length

of metallic electrical resistance material


BS 115:1995 Specification for metallic resistance materials

for electrical purposes


BS 4462:1969 Guide for the preparation of technical sales literature for measuring instruments and

process control equipment


BS 2649-3:1988 Methods for analysis of glass -- Glasses of the potassium oxide-lead oxide-silica type


BS 2649-1:1988 Methods for analysis of glass -- Glasses of the soda-lime-magnesia-silica type


BS

1922:1987+A2:2011

Specification for glass dispensing measures

for pharmaceutical purposes

LBI/1/2 current

BS 5404-2:1977 Specification for plastics laboratory ware --

Graduated measuring cylinders



Filter funnels


BS 894:1956 Specification for Ubbelohde apparatus for flow and drop points



Wash bottles


BS 572:1985 Specification for interchangeable conical

ground glass joints



of 148 January 2016


Outcome

BS 3108:1980 Specification for limestone for making

colourless glasses


BS 5404-1:1976 Specification for plastics laboratory ware -- Beakers


BS 6706:1986 Specification for disposable glass serological

pipettes


BS 5732:1985 Specification for glass disposable Pasteur

pipettes


BS 2701:1956 Specification for Rees-Hugill powder density flask


BS 3447:1962 Glossary of terms used in the glass industry LBI/1/2 confirmed (2011)

BS 2761:1983 Specification for spherical ground joints LBI/1/2 confirmed (2011)

BS 2461:1983 Specification for gas washing bottles LBI/1/2 confirmed (2011)

BS 1132:1987 Specification for automatic pipettes LBI/1/2 confirmed (2011)

BS 4791:1985 Specification for calorimeter bombs LBI/1/2 confirmed (2011)

BS 2735:1956 Specification for iodine flasks LBI/1/2 confirmed (2011)

BS 4116-4:1992 Conveyor chains, their attachments and

associated chain wheels. -- Specification for

chains and attachments (British series)


BS 3790:2006 Specification for belt drives. Endless wedge

belts, endless V-belts, banded wedge belts,

banded V-belts and their corresponding pulleys


BS 4548:1987 Specification for synchronous belt drives for industrial applications

MCE/10 replaced by BS ISO 5296:2012

BS 3733:1974 Specification for endless V-belt drives for

agricultural purposes


BS 5540-6:1990 Evaluating particulate contamination of hydraulic fluids -- Method of calibrating liquid

automatic particle-count instruments (using mono-sized latex spheres)


BS 6005:1997 Specification for moulded transparent

polycarbonate bowls used in compressed air filters and lubricators


BS 6361:1988 Specification for three-pin plug connectors

for electrically controlled fluid power equipment


BS 7993:2011 Twin ferrule connectors and associated

tubing for 316 stainless steel systems. Specification and test methods

MCE/18/-/4 current

BS 978-2:Addendum No.

1:1959

Gears for instruments and clockwork mechanisms. Cycloidal type gears. -- Double

circular arc type gears


BS 2007:1975 Specification for circular gear shaving cutters, 1 to 8 metric module, accuracy requirements


BS 2062-2:1960 Specification for gear hobs -- Hobs for gears

for turbine reduction and similar drives



agreement is reached on

tolerances


of 148 January 2016


Outcome

BS 2062-1:1959 Specification for gear hobs -- Hobs for

general purposes, 1 d.p. to 20 d.p. inclusive



agreement is

reached on tolerances

BS 5246:1976 Specification for pinion type cutters for spur

gears - 1 to 8 metric module


BS 2518-1:1954 Specification for rotary form relieved gear

cutters -- Diametral pitch


BS 4582-2:1978 Specification for fine pitch gears (metric module) -- Hobs and cutters


BS 978-1:1968 Specification for fine pitch gears. -- Involute

spur and helical gears


BS 2518-2:1977 Specification for rotary form relieved gear

cutters -- Metric module


BS 6710:1987 Specification for dimensions of chain wheel tooth forming tools


BS 978-2:1952 Specification for fine pitch gears -- Cycloidal

type gears


BS 2697:1976 Specification for rack type gear cutters,

metric module


BS 978-3:1952 Specification for fine pitch gears -- Bevel gears


BS 721-1:1963 Specification for worm gearing -- Imperial

units


BS 721-2:1983 Specification for worm gearing -- Metric units MCE/5 confirmed (2011)

BS 6168:1987 Specification for non-metallic spur gears MCE/5 confirmed (2011)

BS 4082-1:1969 Specification for external dimensions for

vertical in-line centrifugal pumps -- 'I' Type


BS 4082-2:1969 Specification for external dimensions for vertical in-line centrifugal pumps -- 'U' Type


BS 5257:1975 Specification for horizontal end-suction centrifugal pumps (16 bar)


BS 4278:1984 Specification for eyebolts for lifting purposes MHE/1 replaced by BS EN

ISO 3266:2010 and has been

declared

obsolescent

BS 6451:1984 Specification for netting and fibre rope load

restraint systems in surface transport


BS 6756:1986 Specification for fibre rope cargo nets MHE/16 confirmed (2011)

BS 2573-1:1983 Rules for the design of cranes -- Specification for classification, stress calculations and

design criteria for structures

MHE/3 replaced by BS EN 13001-

1:2004+A1:2009, BS EN 13001-

2:2014, BS EN 13001-3-

1:2012+A1:2013,

BS EN 13001-3-2, BS EN 13001-3-3,

BS EN 13001-3-4 and DD CEN/TS

13001-3-5:2010


of 148 January 2016


Outcome

BS 2573-2:1980 Rules for the design of cranes -- Specification

for classification, stress calculations and design of mechanisms


13001-1:2004+A1:2009,

BS EN 13001-

2:2014, BS EN 13001-3-

1:2012+A1:2013, BS EN 13001-3-2,

BS EN 13001-3-3,

BS EN 13001-3-4 and DD CEN/TS

13001-3-5:2010

BS 5744:1979 Code of practice for safe use of cranes

(overhead/underhung travelling and goliath

cranes, high pedestal and portal jib dockside cranes, manually-operated and light cranes,

container handling cranes and rail-mounted low carriage cranes)

MHE/3/11 partially replaced

by Parts 1 to 3 of

BS 7121. When all parts of BS 7121

have been published BS

5744 will be

revised to cover manually

operated and light cranes only

BS 7121-14:2005 Code of practice for safe use of cranes --

Side boom pipelayers

MHE/3/11 confirmed (2011)

BS 7121-5:2006 Code of practice for safe use of cranes --

Tower cranes

MHE/3/11 confirmed (2011)

BS 8486-2:2007+A1:2011

Examination and test of new lifts before putting into service. Specification for means

of determining compliance with BS EN 81 --

Hydraulic lifts

MHE/4 current

BS 8486-

1:2007+A1:2011

Examination and test of new lifts before

putting into service. Specification for means of determining compliance with BS EN 81 --

Electric lifts

MHE/4 current

BS 6440:2011 Powered vertical lifting platforms having non-enclosed or partially enclosed liftways

intended for use by persons with impaired

mobility. Specification

MHE/4 current

BS 5655-6:2011 Lifts and service lifts -- Code of practice for

the selection, installation and location of new lifts

MHE/4 current

BS 7801:2011 Escalators and moving walks. Code of

practice for safe working on escalators and moving walks

MHE/4 current

BS 4430-2:1969 Recommendations for the safety of powered

industrial trucks -- Operation and maintenance


BS 8439:2005 Continuous handling equipment and systems.

Guide to properties of powders and bulk materials


BS 8905:2011 Framework for the assessment of the

sustainable use of materials. Guidance

MI/1 current

BS 3876-2:1990 Rope rollers, pulleys, mountings and

assemblies for colliery track haulage -- Specification for vertical spindle pulleys,

mountings and assemblies

MRE/1 confirmed (2011)


of 148 January 2016


Outcome

BS 3876-1:1990 Rope rollers, pulleys, mountings and

assemblies for colliery track haulage -- Specification for parallel barrel rollers,

mountings and assemblies


BS 3876-5:1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage --

Specification for suspended pulley assemblies

and clamps


BS 6680:1985 Specification for flameproof equipment for

diesel engines for use in coal mines and other mines susceptible to firedamp


BS 5620:1995 Specification for 200 A 1100 V flameproof

restrained and bolted plugs and sockets for use in coal mines


BS 1090:1970 Specification for flameproof hand-held

electric drilling machines primarily for use in mines


BS 4878:1973 Specification for large (vee-throated) haulage

rope pulleys for mines and quarries


BS 2593:1974 Specification for rotary drill rods and

tungsten carbide tipped rotary drill bits


BS 3237:1960 Specification for light and medium rolling stock for mineral haulage in mines


BS 4073:1966 Specification for heavy rolling stock for

mineral haulage in mines


BS 3618-7:1973 Glossary of mining terms -- Electrical

engineering and lighting


BS 3618-9:1974 Glossary of mining terms -- Shafts and associated equipment


BS 248:1969 Specification for light rails and fishplates for

use at mines


BS 227:1995 Specification for H-section steel arches for

use in mines


BS 3618-1:1969 Glossary of mining terms -- Planning and surveying


BS 3618-3:1971 Glossary of mining terms -- Boring and

exploration


BS 3618-6:1972 Glossary of mining terms -- Drilling and

blasting


BS 3618-8:1974 Glossary of mining terms -- Winning and working


BS 3618-11:1967 Glossary of mining terms -- Strata control MRE/1 confirmed (2011)

BS 4854:1972 Specification for cars for manriding in mines MRE/1 confirmed (2011)

BS 3618-2:1971 Glossary of mining terms -- Ventilation MRE/1 confirmed (2011)

BS 3618-10:1967 Glossary of mining terms -- Transport MRE/1 confirmed (2011)

BS 3618-4:1971 Glossary of mining terms -- Drainage MRE/1 confirmed (2011)

BS 3618-5:1971 Glossary of mining terms -- Geology MRE/1 confirmed (2011)

BS 6907-4:1988 Electrical installations for open-cast mines and quarries -- Recommendations for

winning, stacking and processing machinery, pumps and low signal level and

communications systems


BS 7383:1990 Specification for cold-pour resin-based compound for use as a filling medium in

terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines



of 148 January 2016


Outcome

BS 7019:1989 Specification for fully screened 400 A bolted

flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV,

primarily for use in mines


BS 787-2:1968 Specification for mining type flameproof gate-end boxes -- Gate-end boxes with air-

break circuit-breakers (for use on 3-phase

a.c. circuits up to 650 volts)


BS 787-1:1969 Specification for mining type flameproof

gate-end boxes -- Gate-end boxes for direct-on-line motor starting (for use on 3-phase

a.c. circuits up to 650 V)


BS 5126-4:1993 Mining type flameproof supply and control units for use on systems up to 1100 V --

Specification for air-cooled transformers to

power drilling machines


BS 6709:1986 Specification for interconnection of electrical

apparatus, constructed to two or more British Standards, for use in mines susceptible to

firedamp


BS 6907-2:1988 Electrical installations for open-cast mines and quarries -- General recommendations for

protection against direct contact and electric

shock



gate-end boxes -- Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up

to 650 V)



Specification for air-cooled lighting

transformer units


BS 3101:1986 Specification for control and interlock circuits

primarily associated with flameproof

restrained plugs and sockets for use in coal mines



Specification for direct-on-line motor starters


BS 7924:1999 Code of practice for the repair and overhaul of certified electrical apparatus intended for

use in mines susceptible to firedamp


BS 7202:1989 Specification for non-incendive low voltage control/interlock and low voltage earth fault

monitoring circuits for use in mines



Specification for circuit breaker units


BS 6704:1996 Code of practice for selection, installation and maintenance of intrinsically safe electrical

equipment in coal mines


BS 6907-3:1988 Electrical installations for open-cast mines

and quarries -- Recommendations for

equipment and ancillaries


BS 3905:1995 Specification for 3.8/6.6 kV, 300 A bolted

flameproof cable couplers and adaptors, for

use in coal mines.



of 148 January 2016


Outcome

BS 6705:1987 Specification for electrical measuring

instruments for use on intrinsically safe circuits in coal mines


BS 5125:1990 Specification for 50 A 650 V flameproof,

restrained and bolted plugs and sockets for use in coal mines



gate-end boxes -- Gate-end boxes with lighting transformers


BS 6182-1:1994 Intriniscally safe power supplies for use in

coal mines -- Specification for d.c. power supplies


BS 6182-2:1982 Intrinsically safe power supplies for use in

coal mines -- Specification for a.c. power supplies


BS 6907-5:1988 Electrical installations for open-cast mines and quarries -- Recommendations for

operation


BS 6556-2:1985 Low speed digital signals for use in coal mines -- Specification for transformer

coupling


BS 6556-1:1985 Low speed digital signals for use in coal mines. -- Specification for optical coupling


BS 6556-3:1985 Low speed digital signals for use in coal

mines -- Specification for message protocols


BS 5754:1987 Specification for electrical analogue and state

signals for use in coal mines


BS 6353:1983 Specification for underground loudspeaker communication systems in coal mines


BS 6907-1:1988 Electrical installations for open-cast mines

and quarries -- Glossary


BS 5067:1985 Specification for flameproof transformers for

use in mines


BS 6708:1998 Flexible cables for use at mines and quarries MRE/3 confirmed (2011)

BS 3138:1992 Glossary of terms used in management services

MS/1 confirmed (2011)

BS 3641-2:1980 Symbols for machine tools -- Specification for

numerical control symbols

MTE/1 confirmed (2011)

PD 6490:1980 Guide to application of additional symbols

(and index) for machine tools


BS 3766:1979 Specification for coolant pumps for machine tools


BS 4656-9:1974 Accuracy of machine tools and methods of

test -- External cylindrical grinding machines with reciprocating table

MTE/1/2 confirmed (2011)

BS 7794:1995 Specification for square-drive sockets, driving

squares and accessories for power-driven socket wrenches


BS 2090:1954 Specification for hook spanners, peg spanners, coupling wrenches and the related

slots, holes and horns


BS 6101-6:1990 Machine tool ball screws -- Specification for ball nuts and principal dimensions of ball

screws


BS 3087-10:1991 Pliers and nippers -- Specification for dimensions of tools not standardized by ISO



of 148 January 2016


Outcome

BS 3159-2:1993 Woodworking saws for hand use --

Specification for tenon and dovetail saws


BS 4006:1992 Specification for hand operated square drive socket wrenches and accessories


BS 1842:1952 Specification for double-ended open-jawed

spanners for B.A. hexagon sizes


BS 1937:1953 Specification for engineers' ratchet braces

and drilling pillars


BS 3159-1:1999 Woodworking saws for hand use -- Specification for hand saws


BS 3054:1959 Specification for fireman's axe with rubber

insulated handle


BS 3594-2:1965 Specification for pipe wrenches -- Footprint

type wrenches


BS 3594-1:1963 Specification for pipe wrenches -- Stillson type wrenches


BS 2559:1994 Specification for screwdrivers and

screwdriver accessories


BS 2559-3:1973 Specification for screwdrivers -- Insulated

screwdrivers


BS 3066:1995 Specification for engineers' cold chisels and allied tools


BS 3388:2004 Forks, shovels and spades. Requirements

and test methods


BS 3823:1990 Grading of ash and hickory wood handles for

hand tools


BS 3123:1959 Specification for spring calipers and spring dividers


BS 1421:1995 Specification for picks, beater picks and

mattocks


BS 3623:1981 Specification for woodworkers' metal-bodied

planes


BS 1943:1989 Specification for woodworking chisels and gouges


BS 3322:1981 Specification for carpenters' squares and

bevels


BS 2957:1958 Specification for fireman's axe with ash

handle


BS 3087-1:1991 Pliers and nippers -- General introduction MTE/15 confirmed (2011)

BS 498:1990 Specification for rasps and engineers' files MTE/15 confirmed (2011)

BS 5708:1979 Specification for pruner shears (secateurs) MTE/15 confirmed (2011)

BS 192-1:1996 Open-ended wrenches -- Metric and unified MTE/15 confirmed (2011)

BS 2556:1973 Specification for hand and breast drills MTE/15 confirmed (2011)

BS 2589:1955 Specification for railway track spanners MTE/15 confirmed (2011)

BS 2054:1953 Specification for augers and auger bits MTE/15 confirmed (2011)

BS 2558:1954 Specification for tubular box spanners MTE/15 confirmed (2011)

BS 7586:1992 Specification for combination wrenches MTE/15 confirmed (2011)

BS 7398:1991 Specification for hand hacksaw frames MTE/15 confirmed (2011)

BS 2945:1995 Specification for axes and hatchets MTE/15 confirmed (2011)

BS 2583:1955 Specification for podger spanners MTE/15 confirmed (2011)

BS 3555:1988 Specification for ring wrenches MTE/15 confirmed (2011)

BS 2558:Supplement

No. 1:1968

Metric sizes MTE/15 confirmed (2011)


of 148 January 2016


Outcome

BS 876:1995 Specification for hand hammers MTE/15 confirmed (2011)

BS 1978:1965 Specification for bit braces MTE/15 confirmed (2011)

BS 1660-3:1988 Machine tapers -- Specification for turret

sockets and reduction sleeves with tapped ends for tools with Morse taper shanks


BS 1660-7:1988 Machine tapers -- Specification for extension

adaptors with external 7/24 tapers for tools with Morse taper shanks


BS 949-2:1992 Screwing taps -- Specification for unified

ground thread taps. Manufacturing tolerances


BS 1813:1974 Specification for dimensions of conduit dies, diestocks and guides


BS 3088:1959 Specification for adjustable hand reamers

with inserted blades


BS 328-4:1983 Drills and reamers -- Specification for dimensions of reamers


BS 1098-1:1967 Specification for jig bushes -- Inch units MTE/18 the requirements for metric units in

BS 1098:1967

prior to its re-numbering as BS

1098-1:1967 have been replaced by

BS 1098-2:1977

BS 1919-1:1993 Hacksaw blades -- Specification for hand and machine hacksaw blades


BS 411:1969 Specification for circular saws for

woodworking and their attachment


BS 1919-2:1995 Hacksaw blades -- Specification for cutting

performance


BS 3877:1991 Specification for metal cutting bandsaw blades


BS 4411:1969 Specification for woodcutting bandsaw blades MTE/20 confirmed (2011)

BS 6271:1982 Specification for miniature hacksaw blades MTE/20 confirmed (2011)

BS 4078-1:1987 Powder actuated fixing systems -- Code of

practice for safe use


BS 4078-2:1989 Powder actuated fixing systems --

Specification for tools


BS 4094-1:1966 Recommendation for data on shielding from ionizing radiation -- Shielding from gamma

radiation

NCE/2 current

BS 4094-2:1971 Recommendation for data on shielding from ionizing radiation -- Shielding from X-

radiation

NCE/2 confirmed (2011)

BS 4513:1969 Specification for lead bricks for radiation

shielding


BS 4975:1990 Specification for prestressed concrete pressure vessels for nuclear engineering


BS 3338-13:1965 Methods for the sampling and analysis of tin

and tin alloys -- Method for the determination of antimony in solders and

white metal bearing alloys (volumetric: potassium bromate method)



of 148 January 2016


Outcome


and tin alloys -- Method for the determination of bismuth in ingot tin, tin-lead

solders and white metal bearing alloys




and tin alloys -- Method for the

determination of iron in ingot tin, tin-lead solders and white metal bearing alloys





determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric

method)


BS 3338-15:1965 Methods for the sampling and analysis of tin and tin alloys -- Method for the

determination of copper and lead in white metal bearing alloys (electrodeposition

method)



determination of aluminium in solders and white metal bearing alloys (photometric

method)



determination of cadmium in solders and

white metal bearing alloys (photometric method)



determination of zinc in solders and white

metal bearing alloys (photometric method)




determination of tin in white metal bearing alloys (nickel coil reduction method)



determination of lead in ingot tin and tin-

antimony solders (photometric method)




determination of copper in ingot tin and tin-lead solders (photometric method)



determination of silver in solders (volumetric:

ammonium thiocyanate method)




determination of copper in high purity ingot tin (photometric method)



determination of tin in solders (nickel coil

reduction method)



of 148 January 2016


Outcome


and tin alloys -- Method for the determination of tin in ingot tin (aluminium

reduction method)



determination of nickel in capping metal




and tin alloys -- Method for the determination of antimony in ingot tin



BS 3338-14:1965 Methods for the sampling and analysis of tin and tin alloys -- Method for the sampling of

white metal bearing alloy ingots


BS 3338-21:1983 Methods for the sampling and analysis of tin and tin alloys -- Determination of high

cadmium content of soft solders


BS 4393:1991 Specification for solderable tin or tin-lead coated wires for component terminations


BS 61:1969 Specification for threads for light gauge

copper tubes and fittings


BS 6931:1988 Glossary of terms for copper and copper

alloys


BS 3907-10:1969 Methods for the analysis of magnesium and magnesium alloys -- Determination of

manganese in magnesium alloys containing zirconium, rare earths, thorium and/or silver




manganese in magnesium and magnesium

alloys (photometric-periodate method) (low contents)


BS 3907-2:1966 Methods for the analysis of magnesium and magnesium alloys -- Determination of iron in


(photometric - 1:10-phenanthroline method)


BS 3907-4:1966 Methods for the analysis of magnesium and

magnesium alloys -- Determination of

manganese in magnesium and magnesium alloys (photometric-periodate method)


BS 3907-15:1976 Methods for the analysis of magnesium and magnesium alloys -- Determination of lead in

magnesium and magnesium alloys (atomic

absorption method)



magnesium alloys -- Determination of

aluminium in magnesium and magnesium alloys (photometric method)



zirconium in magnesium and magnesium

alloys (photometric method)



magnesium alloys -- Determination of silicon

in magnesium and magnesium alloys (photometric method)



of 148 January 2016


Outcome


magnesium alloys -- Determination of zinc in magnesium alloys (ion-exchange-volumetric

EDTA method)


BS 3907-3:1966 Methods for the analysis of magnesium and magnesium alloys -- Determination of copper

in magnesium and magnesium alloys



BS 1728-18:1970 Methods for the analysis of aluminium and

aluminium alloys -- Determination of zinc (ion-exchange-volumetric EDTA or

polarographic method)


BS 3907-13:1972 Methods for the analysis of magnesium and magnesium alloys -- Determination of tin in





magnesium alloys -- Determination of total rare earths in magnesium alloys (gravimetric

method)



aluminium in magnesium alloys (gravimetric

method)



aluminium alloys -- Determination of silicon (absorptiometric molybdenum blue method)



aluminium alloys -- Determination of iron (absorptiometric 1:10-phenanthroline

method)


BS 1728-9:1957 Methods for the analysis of aluminium and aluminium alloys -- Determination of

manganese (volumetric: arsenite/nitrite

method)



magnesium alloys -- Determination of nickel in magnesium alloys (photometric method)



aluminium alloys -- Determination of iron (volumetric: titanous chloride method)



aluminium alloys -- Determination of magnesium (atomic absorption method)



aluminium alloys -- Determination of manganese (absorptiometric method)



aluminium alloys -- Determination of magnesium (volumetric CDTA method)


BS 1728-11:1960 Methods for the analysis of aluminium and aluminium alloys -- Determination of silicon

(perchloric acid method)


BS 1728-20:1971 Methods for the analysis of aluminium and aluminium alloys -- Determination of lead

(atomic absorption method)



of 148 January 2016


Outcome


aluminium alloys -- Determination of copper (absorptiometric method)



aluminium alloys -- Determination of chromium (photometric method)



aluminium alloys -- Determination of chromium (volumetric method)



aluminium alloys -- Determination of nickel (gravimetric method)



aluminium alloys -- Determination of nickel (photometric method)


BS 1728-23:1976 Methods for the analysis of aluminium and aluminium alloys -- Copper (atomic

absorption method)


BS 1728-24:1976 Methods for the analysis of aluminium and aluminium alloys -- Nickel (atomic absorption

method)


BS 1728-21:1973 Methods for the analysis of aluminium and aluminium alloys -- Zinc (atomic absorption

method)


BS 1728-1:1951 Methods for the analysis of aluminium and aluminium alloys -- Determination of copper


BS 4574:1970 Recommendation for the determination of

the ink absorbency of paper and board by use of K & N ink

PAI/11 confirmed (2011)

BS 6563:1985 Method for determination of the roughness

of paper and board by the Parker Print-surf apparatus


BS 4497:1969 Recommendations for the detection and estimation of nitrogenous treating agents in

paper


BS 4818:1993 Method for determination of the creasing quality of carton board (Pira method)


BS 6504:1984 Method for determination of water

absorption of paper and board (Klemm method)


BS 4264:1987 Specification for envelopes for commercial,

official and professional use


BS 4816:1972 Method for the determination of the puncture

resistance of board


BS 4896:1973 Method for the determination of ash of pulp PAI/11 confirmed (2011)

BS 6410:1991 Methods of test for filter papers PAI/11 confirmed (2011)

BS 5261-2:2005 Copy preparation and proof correction -- Specification for typographic requirements,

marks for copy preparation and proof correction, proofing procedure


BS 5261C:2005 Copy preparation and proof correction --

Marks for copy preparation and proof correction (extracted from BS 5261-2:2005)


BS 159:1992 Specification for high-voltage busbars and

busbar connections

PEL/17/1 confirmed (2011)


of 148 January 2016


Outcome

BS 5000-3:2006 Rotating electrical machines of particular

types or for particular applications -- Generators to be driven by reciprocating

internal combustion engines. Requirements

for resistance to vibration

PEL/2 confirmed (2011)

BS 6121-5:2005 Mechanical cable glands -- Code of practice

for selection, installation and inspection of

cable glands and armour glands


BS 6121-1:2005 Mechanical cable glands -- Armour glands.



BS 8020:2011 Tools for live working. Specification for insulating hand tools for work on or near

conductor rail systems operating at voltages up to 1000 V a.c. or 1500 V d.c.

PEL/78 current

BS 7194:1990 Specification for direct-current and low-

frequency electronic measuring instruments with a digital display


BS 5164:1975 Specification for indirect-acting electrical

indicating and recording instruments and their accessories


BS 90:1975 Specification for direct-acting electrical

recording instruments and their accessories


BS 3693:1992 Recommendations for design of scales and

indexes on analogue indicating instruments


BS 6366:2011 Specification for studs for rugby football boots

PH/3/11 current

BS 8468-1:2006 Respiratory equipment for use against

chemical, biological, radiological and nuclear (CBRN) agents -- Positive pressure, self-

contained, open-circuit breathing apparatus. Specification


BS 8468-3.2:2009 Respiratory protective devices for use against

chemical, biological, radiological and nuclear (CBRN) agents -- Air-purifying devices

incorporating a hood for escape. Specification

PH/4 current

BS 8468-6.1:2011 Respiratory protective devices for use against

chemical, biological, radiological and nuclear (CBRN) agents -- Positive-pressure

compressed airline equipment. Specification

PH/4 current

BS 8468-6.2:2011 Respiratory protective devices for use against chemical, biological, radiological and nuclear

(CBRN) agents -- Constant flow compressed airline equipment. Specification

PH/4 current

BS 8468-5:2011 Respiratory protective devices for use against

chemical, biological, radiological and nuclear (CBRN) agents -- Dual-mode apparatus.

Specification

PH/4 current

BS 8478:2011 Respiratory protective devices. Breathing gases for diving and hyperbaric applications.


PH/4/7 partially replaced by BS EN

12021:2014

BS 8454:2006 Code of practice for the delivery of training and education for work at height and rescue


BS 3238-1:1960 Graphical symbols for components of servo-

mechanisms -- Transductors and magnetic amplifiers


BS 3238-2:1964 Graphical symbols for components of servo-mechanisms -- General servo-mechanisms



of 148 January 2016


Outcome

BS 8501:2002 Graphical symbols and signs. Public

information symbols


BS 1133-8:2011 Packaging code -- Guidance on wooden boxes, cases and crates

PKW/0/-/11 current

BS 5168:1975 Glossary of rheological terms PRI/10 confirmed (2011)

BS 2782-0:2011 Methods of testing plastic -- Introduction PRI/21 current

BS 5923-2:1980 Methods for chemical analysis of rubber -- EDTA titrimetric method for determination of

zinc content of rubber products


BS 7164-11.2:1993 Chemical tests for raw and vulcanized rubber. Butadiene rubber -- Method for

determination of unsaturation


BS 903-5:2004 Physical testing of rubber -- Guide to the application of rubber testing to finite element

analysis


BS 903-A18:1973 Physical testing of rubber -- Determination of equilibrium water vapour absorption

PRI/22 current

BS 4370-2:1993 Methods of test for rigid cellular materials -- Methods 7 to 9

PRI/24 partially replaced by BS EN ISO

4590:1995 and BS

ISO 1922:2001. Was withdrawn

but has been reinstated

BS 2782-1:Method

140D:1997

Methods of testing plastics. Thermal

properties -- Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride

sheeting (laboratory method)


BS 2782-1:Method 140E:1982

Methods of testing plastics. Thermal properties -- Flammability of a small, inclined

test piece exposed to an alcohol flame (laboratory method)


BS 7953:1999 Entrance flooring systems. Selection,

installation and maintenance


BS 5325:2001 Installation of textile floor coverings. Code of practice


BS 5808:1991 Specification for underlays for textile floor coverings

PRI/3 partially replaced by BS EN

14499:2004

BS 2782-10:Method 1006:1978

Methods of testing plastics. Glass reinforced plastics -- Determination of volatile matter

and resin content of synthetic resin-

impregnated textile glass fabric


BS 5734-5:1990 Polyester moulding compounds for electrical

and other purposes -- Specification for sheet moulding compounds for mechanical

purposes


BS 6882:1987 Guide for storage of raw solid natural and synthetic rubber


BS 5270-1:1989 Bonding agents for use with gypsum plasters

and cement -- Specification for polyvinyl acetate (PVAC) emulsion bonding agents for

indoor use with gypsum building plasters


BS 5350-C7:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests --

Determination of creep and resistance to sustained application of force



of 148 January 2016


Outcome

BS 5350-C1:1986 Methods of test for adhesives. Adhesively

bonded joints: mechanical tests -- Determination of cleavage strength of

adhesive bonds


BS 5350-C15:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests --

Determination of bond strength in

compressive shear



bonded joints: mechanical tests -- 90$0D peel test for a rigid-to-rigid assembly


BS 5350-D4:1976 Methods of test for adhesives. Adhesively

bonded joints: environmental tests -- Determination of staining potential


BS 5350-G3:1987 Methods of test for adhesives --

Determination of ability of anaerobic adhesives to set on metal surfaces



bonded joints: mechanical tests -- Climbing drum peel test


BS 5350-E1:1976 Methods of test for adhesives. Sampling and

analysis of test data -- Guide to statistical analysis


BS 5350-A2:1990 Methods of test for adhesives. Adherends -- Guide to the selection of adherend materials


BS 5350-A1:1976 Methods of test for adhesives. Adherends --

Adherend preparation


BS 5350-B5:1976 Methods of test for adhesives -- Determination of gelation time


BS 3046:1981 Specification for adhesives for hanging

flexible wallcoverings


BS 5350-0:1987 Methods of test for adhesives -- General

introduction


BS 6997:1990 Specification for elastomeric toroidal sealing rings ('O'-rings) manufactured from

acrylonitrile-butadiene rubbers complying with BS 6996


BS 6716:1986 Guide to properties and types of rubber PRI/54 confirmed (2011)

BS 7044-4:1991 Artificial sports surfaces -- Specification for

surfaces for multi-sports use

PRI/57 partially replaced

by BS EN 14877:2006, BS

EN 14904:2006, BS EN 15330-

1:2007 and BS

15330-2

BS 7874:1998 Method of test for microbiological

deterioration of elastomeric seals for joints in pipework and pipelines


BS

3379:2005+A1:2011

Combustion modified flexible polyurethane

cellular materials for loadbearing applications. Specification

PRI/71 current

BS 4023:1975 Specification for flexible cellular PVC sheeting PRI/71 confirmed (2011)

BS 7523:1991 Specification for preformed cellular

polyethylene (PE) materials for the thermal insulation of pipework



of 148 January 2016


Outcome

BS 4841-5:2006 Rigid polyisocyanurate (PIR) and

polyurethane (PUR) products for building end-use applications -- Specification for

laminated boards (roofboards) with auto-

adhesively or separately bonded facings for use as thermal insulation boards for pitched

roofs


BS 4841-2:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building

end-use applications -- Specification for laminated boards with auto-adhesively

bonded facings for use as thermal insulation for internal wall linings and ceilings


BS 2782-3:Method

360C:1991

Methods of testing plastics. Mechanical

properties -- Determination of tear resistance of plastics film and sheeting by the initiation

method


BS 2782-1:Method 131B:1983

Methods of testing plastics. Thermal properties -- Determination of extensibility

after heat ageing of flexible polyvinyl chloride sheet


BS 2782-1:Method

150C:1983

Methods of testing plastics. Thermal

properties -- Determination of low temperature extensibility of flexible polyvinyl

chloride sheet


BS 2782-6:Method 643A:1976

Methods of testing plastics. Dimensional properties -- Shrinkage on heating of film

intended for shrink wrapping applications


BS 2782-8:Method 826A:1992

Methods of testing plastics. Other properties -- Determination of adhesion of print on

plastics sheet


BS 2782-1:Method 150D:1976

Methods of testing plastics. Thermal properties -- Cold crack temperature of film

and thin sheeting


BS 7344:1990 Specification for reeled low density polyethylene film for general purpose

application


BS 3012:1970 Specification for low and intermediate density

polythene sheet for general purposes


BS 2919:1968 Specification for low and intermediate density polythene rod for general purposes


BS 3878:1982 Specification for flexible PVC sheeting for

hospital use


BS 7476:1991 Specification for polyethylene film for

covering silage


BS 3757:1978 Specification for rigid PVC sheet PRI/75 confirmed (2011)

BS 4965:1999 Decorative laminated plastics sheet veneered boards and panels


BS 8472:2011 Methods for the assessment of the oxo-

biodegradation of plastics and of the phyto-toxicity of the residues in controlled

laboratory conditions

PRI/82 current

BS 6564-3:1990 Polytetrafluoroethylene (PTFE) materials and products -- Specification for E glass fibre

filled polytetrafluoroethylene


BS 2880:1991 Methods of testing cellulose acetate flake PRI/82 confirmed (2011)


of 148 January 2016


Outcome

BS 5255:1989 Specification for thermoplastics waste pipe

and fittings

PRI/88 partially replaced

by BS EN 1329-1:2000, BS EN

1455-1:2000, BS

EN 1519-1:2000, BS EN 1565-

1:2000 and BS EN 1566-1:2000

BS 5392-1:2006 Acrylonitrile-butadiene-styrene (ABS) fittings

for use with ABS pressure pipe -- Specification


BS 5391-1:2006 Acrylonitrile-butadiene-styrene (ABS)

pressure pipe -- Specification


BS 6076:1996 Specification for polymeric film for use as a

protective sleeving for buried iron pipes and

fittings (for site and factory application)


BS 416-1:1990 Discharge and ventilating pipes and fittings,

sand-cast or spun in cast iron -- Specification for spigot and socket systems


BS 1560-3.2:1989 Circular flanges for pipes, valves and fittings

(Class designated). Steel, cast iron and copper alloy flanges -- Specification for cast

iron flanges


BS 3293:1960 Specification for carbon steel pipe flanges (over 24 inches nominal size) for the

petroleum industry


BS 6956-5:1992 Jointing materials and compounds -- Specification for jointing compounds for use

with water, low pressure saturated steam, 1st family gases (excluding coal gas) and 2nd

family gases


BS 7076-3:1989 Dimensions of gaskets for flanges to BS 1560 -- Specification for non-metallic envelope

gaskets


BS 6956-1:1988 Jointing materials and compounds -- Specification for corrugated metal joint rings


BS 7531:2006 Rubber bonded fibre jointing for industrial

and aerospace purposes. Specification


BS 3381:1989 Specification for spiral wound gaskets for

steel flanges to BS 1560


BS 3063:1965 Specification for dimensions of gaskets for pipe flanges


BS 7786:2006 Specification for unsintered PTFE tapes for

general use


BS 4249:1989 Specification for paper and cork/paper

jointing


BS 4371:1991 Specification for fibrous gland packings PSE/15/2 confirmed (2011)

BS 7775:2005 Penstocks for use in water and other liquid flow applications. Specification


BS 2000-455:2011 Methods of test for petroleum and its

products -- Determination of the manganese content of gasoline. Atomic absorption

spectrometry (AAS) method

PTI/13 current


products -- Determination of demulsibility

characteristics of lubricating oil (Identical with IP 19/11)

PTI/13 current


of 148 January 2016


Outcome


products -- Determination of oxidation stability of straight mineral oil (Identical with

IP 306/11)

PTI/13 current

BS 2000-48:2011 Methods of test for petroleum and its products -- Determination of oxidation

characteristics of lubricating oil (Identical

with IP 48/11)

PTI/13 current


products -- Determination of kerosine burning characteristics 24-hour method

PTI/13 current

BS 1016-6:1977 Methods for analysis and testing of coal and

coke -- Ultimate analysis of coal

PTI/16 partially replaced

by Sections and subsections of BS

1016

BS 1016-7:1977 Methods for analysis and testing of coal and coke -- Ultimate analysis of coke

PTI/16 partially replaced by Subsections of

BS 1016

BS 1016-8:1977 Methods for analysis and testing of coal and coke -- Chlorine in coal and coke

PTI/16 partially replaced by BS 1016-

106.6.1:1997

BS 2869:2010+A1:201

1

Fuel oils for agricultural, domestic and industrial engines and boilers. Specification

PTI/2 current

BS 1894:1992 Specification for design and manufacture of

electric boilers of welded construction

PVE/2 partially replaced

by BS EN 12953-

8:2001

BS 341-4:2004 Transportable gas container valves --

Pressure relief devices

PVE/3/1 confirmed (2009)

BS 8562:2011 Gas cylinders. In situ, non-destructive examination and testing of refillable seamless

steel tubes of water capacity between 150 L

and 3000 L, used for compressed gases Specification

PVE/3/7 current

BS 8535:2011 Railway applications. Wheelsets and bogies. Powered and non-powered axles with

inboard bearings. Design method

RAE/3 current

BS 845-2:1987 Methods for assessing thermal performance of boilers for steam, hot water and high

temperature heat transfer fluids. --

Comprehensive procedure

RHE/10 confirmed (2011)

BS 845-1:1987 Methods for assessing thermal performance

of boilers for steam, hot water and high temperature heat transfer fluids -- Concise

procedure


BS 779:1989 Specification for cast iron boilers for central heating and indirect hot water supply (rated

output 44 kW and above)

RHE/10 partially replaced by BS EN 303-

1:1999 and BS EN

303-4:1999

BS 7190:1989 Method for assessing thermal performance of

low temperature hot water boilers using a test rig


BS 853-2:1996 Specification for vessels for use in heating

systems -- Tubular heat exchangers and storage vessels for building and industrial

services



of 148 January 2016


Outcome

BS 853-

1:1990+A3:2011

Specification for vessels for use in heating

systems -- Calorifiers and storage vessels for central heating and hot water supply

RHE/12 current

BS 7478:1991 Guide to selection and use of thermostatic

radiator valves


BS 4376:1982 Specification for electrically operated blood storage refrigerators

RHE/19 partially replaced by BS 4376-

1:1991

BS 5429:1976 Code of practice for safe operation of small-

scale storage facilities for cryogenic liquids


BS 8303-2:1994 Installation of domestic heating and cooking appliances burning solid mineral fuels --

Installation of domestic heating and cooking

appliances buring solid mineral fuels. Specification for installing and commissioning

on site


BS 8303-3:1994 Installation of domestic heating and cooking

appliances burning solid mineral fuels --

Recommendations for design and on site installation


BS 1846-1:1994 Glossary of terms relating to solid fuel

burning equipment -- Domestic appliances


BS 5643:1984 Glossary of refrigeration, heating, ventilating

and air-conditioning terms


BS 31100:2011 Risk management. Code of practice and guidance for the implementation of BS ISO

31000

RM/1 current

BS 1902-3.11:1983 Methods of testing refractory materials. General and textural properties --

Measurement of dimensions and shape of refractory bricks and blocks (methods 1902-

311)

RPI/1 confirmed (2011)


Determination of volume and bulk density of dense shaped products (methods 1902-317)


BS 1902-3.2:1981 Methods of testing refractory materials.

General and textural properties -- Measurement of dimensions of specimens for

testing (methods 1902-302)



Determination of pore size distribution (method 1902-316)


BS 3446-2:1990 Glossary of terms associated with refractory

materials -- Applications in the coke, glass, cement and other non-metallurgical

industries



Determination of hydration tendency


BS 1902-3.3:1981 Methods of testing refractory materials. General and textural properties -- Sieve

analysis (methods 1902-303)


BS 3446-3:1990 Glossary of terms associated with refractory materials -- Applications in the metallurgical

industries



of 148 January 2016


Outcome

BS 6434:1984 Guide to the use of BS 6065 'Methods for

sampling and acceptance testing of shaped refractory products'



General and textural properties -- Guidance on sampling



General and textural properties -- Introduction


BS 3056-2:1985 Sizes of refractory bricks -- Specification for

bricks for use in glass-melting furnaces


BS 4207:1989 Code of practice for the installation of

monolithic linings for steel chimneys and

flues


BS 3446-1:1990 Glossary of terms associated with refractory

materials -- General and manufacturing


BS 3056-3:1986 Sizes of refractory bricks -- Specification for bricks for rotary cement kilns



basic bricks for steel making



multi-purpose bricks


BS 6886:1987 Specification for alumino-silicate refractories for use in coke ovens



bricks for ladles


BS 4966:1991 Specification for silica refractories for use in

coke ovens


BS 8904:2011 Guidance for community sustainable development

SDS/1/4 current

BS 8909:2011 Specification for a sustainability management

system for film

SDS/1/7 current

BS MA 18:1973 Specification for salt water piping systems in

ships

SME/32 confirmed (2011)

BS MA 78:1978 Specification for aluminium shore gangways SME/32 confirmed (2011)

BS 6002-3:2005 Sampling procedures for inspection by variables -- Guide to double sampling

schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

SS/5 confirmed (2011)


acceptance sampling systems for inspection of discrete items in lots -- General guide to

acceptance sampling


BS 6000-2:2005 Guide to the selection and usage of acceptance sampling systems for inspection

of discrete items in lots -- Guide to sampling by attributes



acceptance sampling systems for inspection of discrete items in lots -- Guide to sampling

by variables


BS 282; 389:1963 Specifications for lead chromes and zinc chromes for paints


BS 388:1972 Specification for aluminium pigments STI/1 confirmed (2011)

BS 3900-F6:1976 Methods of test for paint. Durability tests on paint films -- Notes for guidance on the

conduct of natural weathering test



of 148 January 2016


Outcome

BS 4800:2011 Schedule of paint colours for building

purposes

STI/14 current

BS 4800F:2011 BS 4800 Colour matching fan STI/14 current

BS 6496:1984 Specification for powder organic coatings for application and stoving to aluminium alloy

extrusions, sheet and preformed sections for external architectural purposes, and for the

finish on aluminium alloy extrusions, sheet and preformed sections coated with powder

organic coatings


BS 245:1976 Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints

and other purposes


BS 3761:1995 Specification for solvent-based paint remover STI/3 confirmed (2011)

BS 3279:1960 Specification for seedlac STI/3 confirmed (2011)

BS 3745:1970 Method for the evaluation of results of accelerated corrosion tests on metallic

coatings


BS 4921:1988 Specification for sherardized coatings on iron

or steel


BS 3831:1964 Specification for vitreous enamel finishes for domestic and catering appliances


BS 4900:1976 Specification for vitreous enamel colours for

building purposes


BS 4950:1973 Specification for sprayed and fused metal

coatings for engineering purposes


BS 4761:1971 Specification for sprayed unfused metal coatings for engineering purposes


BS 4495:1969 Recommendations for the flame spraying of

ceramic and cermet coatings


BS 11000-2:2011 Collaborative business relationships -- Guide

to implementing BS 11000-1

SVS/1/4 current

BS 8453:2011 Compliance framework for regulated financial services firms. Specification

SVS/6/2 current

BS 8564:2011 Furniture removal activities. Overseas moving

services. Specification

SVS/7/2 current

BS 8877:2011 Online recruitment. Code of practice SVS/9 current

BS 1892-3:2003 Gymnasium equipment -- Sports mats.

Specification for fire safety requirements for

mats, mattresses and landing areas

SW/136/22 confirmed (2011)


requirements -- Specification for weight

training equipment



requirements -- Specification for boxing rings


BS 4745:2005 Determination of the thermal resistance of textiles. Two-plate method: fixed pressure

procedure, two-plate plate method: fixed opening procedure, and single-plate method


BS 947:1970 Specification for a universal system for

designating linear density of textiles (Tex system)


BS 7141-2:1991 Narrow fabrics -- Specification for cotton

webbings for personal load carrying purposes


BS 7141-1:1991 Narrow fabrics -- Specification for polyamide

and polyolefin woven tapes and webbings



of 148 January 2016


Outcome

BS 7141-4:1990 Narrow fabrics -- Specification for woven

elastic webbings containing natural rubber


BS 1625-6 and 4830:1972

Specifications for woven cotton tapes, light, medium and heavy qualities


BS 7141-5:1990 Narrow fabrics -- Specification for elastic flat

braids containing natural rubber


BS 984:1990 Method for determination of net mass of

retail packages of knitting and rug yarns


BS 7318:1990 Specification for industrial sewing threads made from linen (flax) or cotton


BS 4134:1990 Method for designation of ticket numbers of

industrial sewing threads


BS 7141-7:1991 Narrow fabrics -- Specification for woven

cotton tapes and webbings


BS 1664-8:1974 Specifications for woven cotton webbings of five qualities


BS 7144:1989 Specification for flax and jute fabrics for

industrial use


BS 7141-3:1990 Narrow fabrics -- Specification for wool tapes TCI/24 confirmed (2011)

BS 7200:1989 Specification for synthetic-fibre needlefelts TCI/24 confirmed (2011)

BS 6131:1982 Glossary of terms relating to household

sewing machines


BS 7033-2:1989 Cleaning and polishing cloths -- Specification

for industrial wipers from reclaimed

materials, and waste yarn for cleaning and lubricating purposes



for floorcloths and dishcloths


BS 8466:2006 Hats. Protection against solar UVR. Method

of test and performance requirements

TCI/66 current

BS 7033-5:1990 Cleaning and polishing cloths -- Specification for general polishing cloths



for window cleaning cloths


BS 5815-1:2005 Sheets, sheeting, pillowslips, towels, napkins,

counterpanes and continental quilt secondary

covers suitable for use in the public sector -- Specification for sheeting, sheets and

pillowslips

TCI/66/1 confirmed (2011)

BS 5335-2:2006 Continental quilts -- Determination of thermal

resistance for quilts filled with feather and/or

down

TCI/66/1 confirmed (2011)

BS 5131-6.2:1979 Methods of test for footwear and footwear

materials. Codes of practice -- Code of

practice for the identification in footwear wear trials of major weaknesses in design or

construction and the assessment of fitness-for-purpose



materials. Adhesives -- Preparation of test assemblies using adhesives (other than hot

melt adhesives) for heat resistance (creep) and peel tests



of 148 January 2016


Outcome


materials. Codes of practice -- Code of practice for the comparative evaluation by

wear trial of materials, components or

constructions



materials. Adhesives -- Recommended

environmental storage conditions for adhesive joints prior to heat resistance or

peeling tests



materials. Uppers, textiles and threads --

Strength of upper materials and lining materials at right angles to stitch perforations



materials. Adhesives -- Preparation of test assemblies using hot melt adhesives for heat

resistance (creep) and peel tests



materials. Testing of complete footwear --

Measurement of the strength of stitched seams in upper and lining materials


BS 3424-14:1985 Testing coated fabrics -- Method 16. Methods

for determination of colour fastness to wet and dry rubbing and determination of

resistance to printwear



materials. Testing of complete footwear --

Determination of the strength of buckle fastening assemblies



materials. Adhesives -- Rate of bond strength development in shear of hot melt adhesives

for lasting


BS 3424-22:1983 Testing coated fabrics -- Method 25. Methods for determination of fusion of PVC coatings

and the state of cure of vulcanized rubber coatings



materials. Solings -- The preparation of test pieces from soling materials for physical

testing


BS 3424-26:1990 Testing coated fabrics -- Methods 29A, 29B, 29C and 29D. Methods for determination of

resistance to water penetration and surface wetting



materials. Testing of complete footwear -- Degree of vulcanization of moulded-on

rubber soles


BS 5131-5.9:1979 Methods of test for footwear and footwear materials. Testing of complete footwear --

Strength of top piece attachment to shoe heels



materials. Testing of complete footwear -- Fatigue test for rigid units and shoe bottoms



of 148 January 2016


Outcome


materials. Solings -- Ross flexing method for cut growth resistance of soling materials



materials. Testing of complete footwear -- Impact test for rigid units and shoe bottoms


BS 3424-36:1993 Testing coated fabrics -- Method 39. Method

for determination of the dimensional stability of coated fabrics to domestic washing



materials. Solings -- Resistance of solings to short-term contact with a hot surface



materials. Other components -- Resistance of heels of ladies' shoes to lateral impact


BS 5131-3.4:1978 Methods of test for footwear and footwear materials. Uppers, textiles and threads --

Edgewise compressibility, upper materials



Adhesion of stuck-on and moulded-on soles


BS 3424-20:1987 Testing coated fabrics -- Method 23. Method for determination of dimensional changes on

mechanical relaxation at zero tension



Resistance of complete footwear to heat



Sampling and physical testing of leather -- Determination of resistance to bending and

abrasion of heavy leather


BS 3424-25:1993 Testing coated fabrics -- Method 28. Method for determination of the coating thickness

and thickness of any expanded layer



materials. Other components -- Resistance to

peeling of ribs stuck to insoles



materials. Uppers, textiles and threads --

Abrasion resistance of shoe laces


BS 3424-18:1986 Testing coated fabrics -- Methods 21A and

21B. Methods for determination of resistance to wicking and lateral leakage



materials. Adhesives -- Resistance of adhesive joints to heat (creep test)



materials. Uppers, textiles and threads -- Breaking strength of shoe laces



materials. Adhesives -- Measurement of green strength of adhesive joints



materials. Other components -- Shear strength of ribs stuck to insoles



Sole bond peeling strength



of 148 January 2016


Outcome


materials. Other components -- Resistance to peeling of insole board



materials. Uppers, textiles and threads -- The break/pipiness test



materials. Adhesives -- Resistance of adhesive joints to peeling


BS 3424-17:1987 Testing coated fabrics -- Method 20. Method

for determination of dimensional stability to water immersion



materials. Other components -- Tensile strength of fibreboard


BS 3424-34:1992 Testing coated fabrics -- Method 37. Method for determination of water vapour

permeability index (WVPI)


BS 7269-1:1991 Drycleanability of leather garments -- Specification for drycleanability and for

appropriate care labels


BS 5131-4.2:1990 Methods of test for footwear and footwear materials. Other components -- Flexing index

of fibreboard


BS 3424-31:1990 Testing coated fabrics -- Method 34. Method for determination of resistance to scuffing

and snagging


BS 3424-13:1999 Testing coated fabrics -- Guide to the selection of methods for colour fastness to

light testing


BS 3424-24:1990 Testing coated fabrics -- Methods 27A and 27B. Methods for determination of abrasion

resistance


BS 3144:Addendum

No. 2:1981

Sampling and physical testing of leather --

Measurement of water vapour absorption


BS 3424-21:1993 Testing coated fabrics -- Method 24. Method for determination of elongation and tension

set


BS 3424-19:1989 Testing coated fabrics -- Methods 22A, 22B and 22C. Determination of sulphur staining


BS 3546:2001 Coated fabrics for use in the manufacture of

water penetration resistant clothing


BS 3424-10:1987 Testing coated fabrics -- Methods 12A and

12B Determination of surface drag


BS 5131-0:1990 Methods of test for footwear and footwear materials -- General introduction


BS 7269-2:1991 Drycleanability of leather garments -- Method

for assessing drycleanability


BS 7141-6:1989 Narrow fabrics -- Specification for laces for

footwear and other purposes


BS 3424-16:1995 Testing coated fabrics -- Method 18. Determination of air permeability


BS 3424-28:1995 Testing coated fabrics -- Method 31.

Determination of specular gloss


BS 5455:1977 Specification for polyurethane coated nylon

fabric for mattress covers



of 148 January 2016


Outcome

BS 3424-38:1998 Testing coated fabrics -- Determination of

wounded burst strength


BS 3935:1991 Guide to classification and marking of cattle hides and calfskins


BS 4981:1984 Specification for Mondopoint footwear sizing

and marking system


BS 6453:1984 Specification for performance of leathers for

garments


BS 7451:1991 Specification for archival quality bookbinding leather


BS 2797:1976 Specification for leathers for gas meter

diaphragms


BS 3424-0:2000 Testing coated fabrics -- Index of parts TCI/69 confirmed (2011)

BS 6715:1991 Specification for chamois leather TCI/69 confirmed (2011)

BS 5833:1988 Scheme for labelling of footwear TCI/69 confirmed (2011)

BS 4674:1971 Methods for the determination of the

breaking load and knot breaking load of netting yarns for fishing nets


BS 3367:1999 Specification for ropes and lines for fire

service use other than for rope rescue purposes


BS 4406:1969 Specification for the designation in the Tex system of netting yarns for fishing nets


BS 1214:1977 Specification for hessian sandbags and rot-

proofed hessian sandbags


BS 5398:1976 Classification of methods for mounting and joining of fishing nets


BS 3566:1982 Specification for lightweight salvage sheets for fire service use


BS 1103:1989 Specification for fabrics for the reinforcement

of rubber hoses


BS 7648:1993 Specification for double braided ropes made from man-made fibre


BS 5127:1974 Specification for polyolefin webbing for

divans and bed bases


BS 4881:1993 Specification for polypropylene film cords,

lines and twines


BS 3104:1970 Specification for polyamide (nylon) mountaineering ropes


BS 4763:1971 Methods for cutting knotted netting to shape

(tapering)


BS 525:1991 Specification for fibre cores for wire ropes TCI/77 confirmed (2011)

BS 6170:1981 Specification for flax canvas water buckets TCI/77 confirmed (2011)

BS 6894:1987 Specification for jute hessian tubing TCI/77 confirmed (2011)

BS 3408:1992 Specification for tarpaulins TCI/77 confirmed (2011)

BS 6810-2:2005 Determination of metals in textiles -- Analysis

by atomic emission spectroscopy


BS 8459:2005 Determination of extractable matter in

textiles. Method


BS 4407:1988 Methods for quantitative analysis of fibre mixtures

TCI/80 replaced by Parts of BS EN ISO

1833

BS 1006:B01C:LFS1:19

82

Methods of test for colour fastness of textiles and leather. Blue wool standards --

Reference standard for no. 1



of 148 January 2016


Outcome

BS

1006:B01C:LFS2:1985

Methods of test for colour fastness of textiles

and leather. Blue wool standards -- Reference standard for no. 2


BS

1006:B01C:LFS3:1989




BS

1006:B01C:LFS4:1990




BS

1006:B01C:LFS5:1988




BS

1006:B01C:LFS6:1988




BS 1006:B01C:LFS7:19

85




BS 1006:B01C:LFS8:19

87




BS 6923:1988 Method for calculation of small colour differences


BS 6246-5:1991 Industrial laundry machinery -- Methods for

the assessment of the effect of shaped garment finishing machinery on textiles


BS 7305:1990 Method for determination of the maximum

safe ironing temperature of fabrics


BS 5742:1989 Specification for textile labels requiring to be

washed and/or dry cleaned


BS 7940:1999 Analogue PSTN terminal support interface TCT/2 confirmed (2011)

BS 3730-2:1982 Assessment of departures from roundness -- Specification for characteristics of stylus

instruments for measuring variations in radius (including guidance on use and

calibration)

TDW/4 current

BS 1646-3:1984 Symbolic representation for process measurement control functions and

instrumentation -- Specification for detailed symbols for instrument interconnection

diagrams


BS 1646-2:1983 Symbolic representation for process measurement control functions and

instrumentation -- Specification for additional

basic requirements


BS 959:2008 Specification for internal micrometers

(including stick micrometers)

TDW/4 current

BS 969:2008 Specification for limits and tolerances on plain limit gauges

TDW/4 partially replaced by BS EN ISO

1938-1:2015

BS 887:2008 Precision vernier callipers. Requirements and test methods


13385-1:2011

BS 907:2008 Specification for dial gauges for linear

measurement

TDW/4 partially replaced

by BS EN ISO

463:2006


of 148 January 2016


Outcome

BS 3777:1964 Specification for screw thread measuring

cylinders

TDW/4 replaced by BS

5590:1978

BS 1643:2008 Specification for precision vernier height gauges


13225:2012

BS 6365:2008 Specification for precision vernier depth gauges


13385-2:2011

BS 870:2008 Specification for external micrometers TDW/4 partially replaced

by BS EN ISO

3611:2010

BS 2795:1981 Specification for dial test indicators (lever

type) for linear measurement

TDW/4/4 replaced by BS EN

ISO 9493:2010

and has been declared

obsolescent

PD 68888:2011 Objectives and learning outcomes for BS

8888 training

TDW/4/6 current

BS 7373-2:2001 Product specifications -- Guide to identifying criteria for a product specification and to

declaring product conformity

TDW/4/7 confirmed (2011)

BS 8887-240:2011 Design for manufacture, assembly, disassembly and end-of-life processing

(MADE) -- Reconditioning

TDW/4/7 current

BS 7373-3:2005 Product specifications -- Guide to identifying criteria for specifying a service offering


BS 7373-1:2001 Guide to the preparation of specifications --

Guide to preparation


BS 3300:1974 Specification for kerosine (paraffin) unflued

space heaters, cooking and boiling appliances

for domestic use

W/- confirmed (2011)

BS 3300:1985 Specification for paraffin unflued space

heating and cooking appliances for domestic use


BS 2049:1985 Specification for paraffin lighting appliances

for domestic use


BS 4570:1985 Specification for fusion welding of steel castings

WEE/-/1 partially replaced by BS EN 1011-

8:2004

BS 7363:1990 Method for bead-on-plate (BOP) test for

welds


BS 4677:1984 Specification for arc welding of austenitic stainless steel pipework for carrying fluids


BS 6990:1989 Code of practice for welding on steel pipes

containing process fluids or their residuals


BS 2633:1987 Specification for Class I arc welding of ferritic

steel pipework for carrying fluids


BS 2971:1991 Specification for class II arc welding of carbon steel pipework for carrying fluids


BS 4515-2:1999 Specification for welding of steel pipelines on

land and offshore -- Duplex stainless steel pipelines

WEE/21/7 confirmed (2011)

BS 7670-2:1997 Steel nuts and bolts for resistance projection

welding -- Specification for welding of weld nuts and weld bolts



of 148 January 2016


Outcome

BS 4871-3:1985 Specification for approval testing of welders

working to approved welding procedures -- Arc welding of tube to tube-plate joints in

metallic materials


BS 9690-2:2011 Non-destructive testing. Guided wave testing -- Basic requirements for guided wave testing

of pipes, pipelines and structural tubulars

WEE/46 current

BS 9690-1:2011 Non-destructive testing. Guided wave testing -- General guidance and principles

WEE/46 current

BS 2737:1956 Terminology of internal defects in castings as

revealed by radiography


BS identifier Title Committee Status Final Review...

Documents

Transcript of BS identifier Title Committee Status Final Review...