BS identifier BS Title Committee Status Final Review...

Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee

of 20 January 2015

BS identifier BS_Title Committee Status Final Review

Outcome

BS 1054:1975 Specification for engineers' comparators for

external measurement

TDW/4 confirmed (2010)

BS 10999:2010 Specification for distress signal units for the fire and rescue service

PH/4 current

BS 11000-1:2010 Collaborative business relationships -- A

framework specification

SVS/1/4 current

BS 1134:2010 Assessment of surface texture. Guidance and

general information

TDW/4 current

BS 1154:2003 Natural rubber compounds. Specification PRI/54 confirmed (2008)

BS 1189:1986 Specification for baths made from porcelain

enamelled cast iron

B/503 partially replaced

by BS EN 232:2003

BS 131-1:1961 Notched bar tests -- The Izod impact test of

metals

ISE/101 confirmed (2007)

BS 131-4:1972 Notched bar tests -- Calibration of pendulum

impact testing machines for metals

ISE/101 partially replaced

by BS EN 10045-

2:1993

BS 131-5:1965 Notched bar tests -- Determination of

crystallinity


BS 131-6:1998 Notched bar tests -- Method for precision

determination of Charpy V-notch impact energies for metals


BS 131-7:1998 Notched bar tests -- Specification for verification of the test machine used for

precision determination of Charpy V-notch

impact energies for metals


BS 1347:1986 Specification for architects', engineers' and

surveyors' metric scale rules


BS 1377-1:1990 Methods of test for soils for civil engineering purposes -- General requirements and

sample preparation

B/526/3 confirmed (2010)

BS 1377-3:1990 Methods of test for soils for civil engineering

purposes -- Chemical and electro-chemical tests



purposes -- Compaction-related tests



purposes -- Compressibility, permeability and

durability tests


BS 1377-6:1990 Methods of test for soils for civil engineering purposes -- Consolidation and permeability

tests in hydraulic cells and with pore pressure measurement



purposes -- Shear strength tests (total stress)



purposes -- Shear strength tests (effective

stress)


BS 1390:1990 Specification for baths made from vitreous

enamelled sheet steel

B/503 confirmed (2010)

BS 1407:1970 Specification for high carbon bright steel

(silver steel)



of 20 January 2015

BS 1428-D4:1963 Microchemical apparatus. Volumetric analysis

-- Specification for capillary pipettes

LBI/1/2 confirmed (2010)

BS 1449-1.1:1991 Steel plate, sheet and strip. Carbon and

carbon-manganese plate, sheet and strip --

General specification


BS 1449-1.14:1991 Steel plate, sheet and strip. Carbon and

carbon-manganese plate, sheet and strip --

Specification for hot rolled narrow strip supplied in a range of conditions for heat

treatment and general engineering purposes


BS 1449-1.8:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip --

Specification for hot rolled narrow strip based on formability


BS 1521:1972 Specification for waterproof building papers B/546 current

BS 1635:1990 Recommendations for graphic symbols and abbreviations for fire protection drawings

FSH/14 current

BS 1726-1:2010 Cylindrical helical springs made from round

wire and bar. Guide to methods of specifying and tolerancing hot coiled springs, and cold

coiled springs not covered by BS EN 15800, and general spring testing -- Compression

springs

FME/9/3 current

BS 1782:1951 Specification for couplings for suction and delivery hose (1$9H in. to 8 in. nominal

sizes) other than fire hose couplings

PRI/66 obsolescent (2012)

BS 18477:2010 Inclusive service provision. Requirements for

identifying and responding to consumer vulnerability

SVS/0 current

BS 1906:1952 Specification for hose couplings (air and

water) ($9B in. to 1$9D in. nominal sizes)

PRI/66 obsolescent

(2012)

BS 2000-0-1:1999 Methods of test for petroleum and its products. General introduction -- Section 0.1:

Specifications - IP standard for thermometers

PTI/13 confirmed (2010)

BS 2000-0-2:1996 Methods of test for petroleum and its

products. General introduction --

Specifications for IP standard reference liquids


BS 2000-0-4:1996 Methods of test for petroleum and its

products. General introduction -- Barometric pressure corrections


BS 2000-1:1995 Methods of test for petroleum and its products -- Determination of acidity,

neutralization value. Colour indicator titration

method


BS 2000-107:1993 Methods of test for petroleum and its

products -- Determination of sulfur. Lamp

combustion method



products -- Determination of specific energy


BS 2000-133:1993 Methods of test for petroleum and its products -- Determination of drop melting

point of wax and petrolatum



of 20 January 2015


products -- Determination of oil content of water mix metalworking oil dilutions


BS 2000-142:1993 Methods of test for petroleum and its products -- Determination of oxidation

stability of lubricating grease. Oxygen bomb method



products -- Determination of cone penetration of petrolatum



products -- Determination of distillation characteristics of volatile organic liquids



products -- Determination of neutralization value of bitumen. Colour indicator titration

method


BS 2000-223:1993 Methods of test for petroleum and its products -- Determination of ash of

petroleum products containing mineral matter



products -- Determination of mercaptan sulfur and hydrogen sulfide content of

liquefied petroleum gases (LPG). Electrometric titration method



products -- Determination of air release of lubricating and hydraulic oils


BS 2000-317:1995 Methods of test for petroleum and its products -- Determination of residues in

liquefied petroleum gases. Low temperature evaporation method


BS 2000-346:1996 Methods of test for petroleum and its products -- Determination of polycyclic

aromatics in unused lubricating base oils and asphaltene free petroleum fractions.

Dimethyl sulphoxide extraction refractive index method



products -- Determination of open flash and fire point. Pensky-Martens method


BS 2000-450:2000 Methods of test for petroleum and its products -- Diesel fuel. Assessment of

lubricity using the high-frequency

reciprocating rig (HFRR). Test method



products -- Determination of phosphorus in

gasoline. Spectrophotometric method



products -- Determination of potassium in gasoline. Atomic absorption spectrometry

(AAS) method



of 20 January 2015


products -- Determination of cone penetration of lubricating grease



products -- Determination of sulfur. High pressure combustion method


BS 2000-76:1993 Methods of test for petroleum and its products -- Determination of congealing point

of waxes and petrolatum


BS 2457:1975 Specification for protractors for drawing

office use


BS 2459:1974 Specification for set squares (fixed and adjustable) for drawing office use


BS 2464:1954 Specification for hose couplings for petrol, oil

and lubricants ($9L in. to 4 in. nominal sizes)

PRI/66 obsolescent

(2012)

BS 2543:2004 Upholstery fabrics for end use applications. Classification

TCI/66 confirmed (2010)

BS 2634-1:2010 Roughness comparison specimens --

Specification for turned, ground, bored,

milled, shaped and planed specimens

TDW/4/9 current

BS 2634-2:2010 Roughness comparison specimens -- Specification for spark-eroded, shot-blasted,

grit-blasted and polished specimens

TDW/4/9 current

BS 2738-

3:2004+A1:2008

Spectacle lenses -- Specification for the

presentation of prescriptions and prescription orders for ophthalmic lenses

CH/172/3 confirmed (2010)

BS 2752:2003 Chloroprene rubber compounds. Specification PRI/54 confirmed (2008)

BS 2772-2:1989 Colliery haulage and winding equipment. --

Specification for wrought steel


BS 2782-7:Method 720B:1979

Methods of testing plastics. Rheological properties -- Cup flow of phenolic and alkyd

moulding materials

PRI/21 confirmed (2010)

BS 2952:1958 Specification for rubber hose for i.c. engine

cooling systems

PRI/66 obsolescent

(2012)

BS 2975-1:2004 Sampling and analysis of glass-making sands

-- Methods for sampling and physical testing of glass-making sands

LBI/1/2 confirmed (2010)

BS 2979:1958 Transliteration of Cyrillic and Greek characters

IDT/2 confirmed (2010)

BS 2A 260-2A

265:2010

Specification for pan and 100$0D

countersunk slotted head screws with ISO metric screw threads

ACE/12 current

BS 2HC 100:2010 Procedure for inspection, testing and

acceptance of iron, nickel, copper, cobalt and refractory metal base alloy castings

ACE/61 current

BS 2HR 10:2010 Specification for nickel-cobalt-chromium-

molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts

(nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al

0.5)

ACE/61/-/48 current


of 20 January 2015

BS 2HR 3:2010 Specification for nickel-cobalt-chromium-

molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts

(nickel base, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti 1.2)

ACE/61/-/48 current

BS 2HR 4:2010 Specification for nickel-chromium-cobalt-

aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts

(nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4)

ACE/61/-/48 current

BS 2HR 40:2010 Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets,

bars and forgings (cobalt base Cr 20, W 15, Ni 10, Mn 1.5)

ACE/61/-/48 current

BS 2HR 5:2010 Specification for nickel-chromium-titanium

heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4)

ACE/61/-/48 current

BS 2HR 505:2010 Specification for nickel-chromium-iron-

titanium-niobium-aluminium heat-resisting alloy round wire with a maximum diameter of

2 mm for thread inserts (nickel base Cr 15.5,

Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70)

ACE/61/-/48 current

BS 2HR 506:2010 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire:

softened (nickel base, Cr 19.5, Co 1.8, Ti 2.5, Al 1.5)

ACE/61/-/48 current

BS 2HR 51:2010 Specification for high expansion heat-resisting steel billets, bars, forgings and parts

(Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7,

V 0.3) (Solution treated at 980 $0DC)

ACE/61/-/48 current

BS 2HR 52:2010 Specification for heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti

1.8, Mn 1.5, Mo 1.2, V 0.3)

ACE/61/-/48 current

BS 2HR 53:2010 Specification for nickel-iron-chromium-

molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 42.5,

Cr 12.5, Mo 5.8, Ti 3.0, Fe remainder)

ACE/61/-/48 current

BS 2HR 55:2010 Specification for nickel-iron-chromium-

molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts

(Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)

ACE/61/-/48 current

BS 2HR 6:2010 Specification for nickel-chromium- iron-molybdenum-cobalt-tungsten heat-resisting

alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)

ACE/61/-/48 current

BS 31:1940 Specification. Steel conduit and fittings for

electrical wiring

PEL/213 obsolescent

(2011)

BS 3227:2003 Butyl rubber compounds (including halobutyl compounds). Specification


BS 336:2010 Specification for fire hose couplings and ancillary equipment

FSH/17/8 current


of 20 January 2015

BS 3402:1969 Specification for quality of vitreous china

sanitary appliances


BS 3459:1985 Specification for stands for drawing boards TDW/4 confirmed (2010)

BS 350:2004 Conversion factors for units SS/7 confirmed (2010)

BS 3505:1986 Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold

potable water

PRI/88 replaced by BS EN 1452-1:1999, BS

EN 1452-2:1999,

BS EN 1452-3:1999, BS EN

1452-4:1999 and BS EN 1452-

5:1999

BS 3509:1962 Specification for spirit level vials TDW/4 confirmed (2010)

BS 3518-1:1993 Methods of fatigue testing -- Methods of fatigue testing. Guide to general principles


BS 3518-3:1963 Methods of fatigue testing -- Direct stress

fatigue tests


BS 3900-0:2010 Methods of test for paints -- Index of test methods

STI/10 current

BS 3998:2010 Tree work. Recommendations B/213 current

BS 3F 128:2010 Specification for cotton webbing suitable for

aerospace purposes (warp yarn nominally R

310 tex)

ACE/65 current

BS 3HR 1:2010 Specification for nickel-chromium-titanium-

aluminium heat-resisting alloy billets, bars,

forgings and parts (nickel base, Cr 19.5, Ti 2.2, Al 1.4)

ACE/61/-/48 current

BS 41:1973 Specification for cast iron spigot and socket

flue or smoke pipes and fittings


BS 4177:1992 Specification for cooker control units PEL/23 confirmed (2010) BS 4268:1967 Specification for the marking of wooden

hatchway covers

SME/32 confirmed (2007)

BS 4280:1968 Transliteration of Arabic characters IDT/2 confirmed (2010)

BS 4315-2:1970 Methods of test for resistance to air and

water penetration -- Permeable walling constructions (water penetration)


BS 4345:1968 Specification for slotted angles MHE/8 confirmed (2008)

BS 4358:1968 Glossary of terms used in air gauging with

notes on the technique


BS 4484-1:1969 Specification for measuring instruments for

constructional works -- Metric graduation and figuring of instruments for linear

measurement


BS 4521-1.1:1971 Specification for railway turnouts for private users. Turnouts over which British Railways

locomotives operate -- Turnouts using bull head rails

RAE/2 confirmed (2010)

BS 4521-1.2:1971 Specification for railway turnouts for private users. Turnouts over which British Railways

locomotives operate -- Turnouts using flat

bottom rail



of 20 January 2015

BS 4521-2:1975 Specification for railway turnouts for private

users -- Light grade turnouts over which British Railways locomotives do not operate,

for axle loads not exceeding 10 tons, using flat bottom rails


BS 4521-3.1:1974 Specification for railway turnouts for private users. Medium grade turnouts over which

British Railways locomotives do not operate,

for axle loads not exceeding 25 tons -- Turnouts using bull head rail


BS 4521-3.2:1975 Specification for railway turnouts for private users. Medium grade turnouts over which

British Railways locomotives do not operate, for axle loads not exceeding 25 tons --

Turnouts using flat bottom rails


BS 4521-4:1975 Specification for railway turnouts for private

users -- Heavy grade turnouts over which British Railways locomotives do not operate,

for axle loads which may exceed 25 tons, using flat bottom rails


BS 4569:1983 Method of test for ignitability (surface flash) of pile fabrics and assemblies having pile on

the surface

TCI/66/-/8 confirmed (2008)

BS 4607-1:1984+A2:2010

Non-metallic conduits and fittings for electrical installations -- Specification for

fittings and components of insulating

material

PEL/213 current

BS 4607-

5:1982+A3:2010

Non-metallic conduit fittings for electrical

installations -- Specification for rigid conduits,

fittings and boxes of insulating material

PEL/213 current

BS 4680:1996 Specification for clothes lockers MHE/8 confirmed (2008)

BS 47-1:1991 Fishplates for railway rails -- Specification for

rolled steel fishplates


BS 476-3:2004 Fire tests on building materials and

structures -- Classification and method of test

for external fire exposure to roofs

FSH/22/-/8 current

BS 476-

6:1989+A1:2009

Fire tests on building materials and

structures -- Method of test for fire

propagation for products

FSH/21 current

BS 4787-1:1980 Internal and external wood doorsets, door

leaves and frames -- Specification for dimensional requirements


BS 4811:1972 Specification for the presentation of research and development reports


BS 4812:1972 Specification for the romanization of

Japanese


BS 4825-

1:1991+A2:2009

Stainless steel tubes and fittings for the food

industry and other hygienic applications --

Specification for tubes

ISE/110 partially replaced

by BS EN

10357:2013

BS 4875-8:1998 Furniture. Strength and stability of furniture -

- Methods for determination of stability of non-domestic storage furniture

FW/0/2 confirmed (2010)


of 20 January 2015

BS 4894:1993 Specification for bifurcated rivets for general

purpose use (metric series)

FME/9 confirmed (2010)

BS 493:1995+A1:2010

Specification for airbricks and gratings for wall ventilation

B/519/1 current

BS 4933:2010 Specification for ISO metric black cup and countersunk head bolts and screws with

hexagon nuts

FME/9 current

BS 4971:2002 Repair and allied processes for the conservation of documents.

Recommendations

IDT/2/9 confirmed (2008)

BS 4999-141:2004+A1:2010

General requirements for rotating electrical machines -- Specification for standard

dimensions

PEL/2 current

BS 4HR 601:2010 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire

(maximum diameter or minor sectional dimension of 30 mm) for the manufacture of

fasteners (nickel base, Cr 19.5, Ti 2.2, Al 1.4)

ACE/61/-/48 current

BS 4S 500:2010 Aerospace series. Procedure for inspection,

testing and acceptance of steel sheet and strip

ACE/61 current

BS 5046:1974 Method for the estimation of equivalent

diameters in the heat treatment of steel


BS 5073:1982 Guide to stowage of goods in freight

containers

TW/1 confirmed (2008)

BS 5200:1997 Specification for dimensions of hydraulic

connectors and adaptors

MCE/18 confirmed (2010)

BS 5248:1990 Specification for aspirated hygrometer LBI/1/2 confirmed (2010)

BS 5252:1976 Framework for colour co-ordination for

building purposes

STI/14 confirmed (2010)

BS 5252F:1976 Colour matching fan STI/14 confirmed (2010)

BS 5266-2:1998 Emergency lighting -- Code of practice for electrical low mounted way guidance systems

for emergency use

EL/1/1 confirmed (2010)

BS 5266-4:1999 Emergency lighting -- Code of practice for design, installation, maintenance and use of

optical fibre systems


BS 5266-5:1999 Emergency lighting -- Specification for

component parts of optical fibre systems


BS 5266-6:1999 Emergency lighting -- Code of practice for

non-electrical low mounted way guidance systems for emergency use.

Photoluminescent systems


BS 5276-2:2003 Pressure vessel details (dimensions) --

Specification for saddle supports for

horizontal cylindrical pressure vessels

PVE/1 confirmed (2010)

BS 5285:1975 Specification. Performance of a.c. electric ventilating fans and regulators for non-

industrial use

CPL/59 confirmed (2010)

BS 5335-1:1991+A2:2010

Continental quilts -- Specification for quilts containing fillings other than feather and/or

down

TCI/66 current

BS 5346:1976 Specification. ISO metric trapezoidal screw threads



of 20 January 2015

BS 5380:1984 Specification for hydraulic port and stud

coupling using 'O'-ring sealing and 'G' series fastening threads


BS 5395-1:2010 Stairs -- Code of practice for the design of

stairs with straight flights and winders

B/208 current

BS 5459-2:2000+A2:2008

Specification for performance requirements and tests for office furniture -- Office

pedestal seating for use by persons weighing

up to 150kg and for use up to 24 hours a day, including type-approval tests for

individual components

FW/0/3 confirmed (2010)

BS 5482-1:2005 Code of practice for domestic butane- and propane-gas-burning installations --

Installations at permanent dwellings, residential park homes and commercial

premises, with installation pipework sizes not exceeding DN 25 for steel and DN 28 for

corrugated stainless steel or copper

GSE/24 confirmed (2010)

BS 5489-

2:2003+A1:2008

Code of practice for the design of road

lighting -- Lighting of tunnels

EL/1/2 current

BS 5502-

50:1993+A2:2010

Buildings and structures for agriculture --

Code of practice for design, construction and use of storage tanks and reception pits for

livestock slurry

B/549 current

BS 5507-1:1977 Methods of test for falsework equipment -- Floor centres


BS 5507-3:1982 Methods of test for falsework equipment --

Props

B/514 partially replaced

by BS EN

1065:1999

BS 5546:2010 Specification for installation and maintenance

of gas-fired water-heating appliances of rated input not exceeding 70 kW net

GSE/30 current

BS 5550-2.11.2:1980 Cinematography. 16 mm film. Spindles -- Specification for dimensions of precision

grade spindles for 16 mm cinematograph

equipment and telecine machines

CPW/36 partially replaced by BS 5550-

2.11.1:1978

BS 5605:1990 Recommendations for citing and referencing

published material


BS 5656-2:2004 Escalator and moving walks. Safety rules for the construction and installation of escalators

and moving walks -- Code of practice for the selection, installation and location of new

escalators and moving walks

MHE/4 confirmed (2010)

BS 567:1973 Specification for asbestos-cement flue pipes

and fittings, light quality


BS 5682:1998 Specification for probes (quick connectors)

for use with medical gas pipeline systems

CH/121/1 current

BS 5854:1980 Code of practice for flues and flue structures in buildings


BS 5864:2010 Installation and maintenance of gas-fired

ducted air heaters of rated heat input not exceeding 70 kW net (2nd and 3rd family

gases). Specification

GSE/30/-/7 current

BS 5867-1:2004 Textiles and textile products. Curtains and drapes -- General requirements



of 20 January 2015

BS 5867-2:2008 Fabrics for curtains, drapes and window

blinds -- Flammabililty requirements. Specification

TCI/66/-/8 current

BS 5885-1:1988 Automatic gas burners -- Specification for

burners with input rating 60 kW and above

GSE/27 partially replaced

by BS EN 676:1997

BS 5885-2:1987 Automatic gas burners -- Specification for packaged burners with input rating 7.5 kW

up to but excluding 60 kW

GSE/27 partially replaced by BS EN

676:1997

BS 5892-2:1992 Railway rolling stock materials -- Specification

for forged and rolled wheel centres

RAE/3/-/1 confirmed (2010)

BS 5892-3:1992+A2:2009

Railway rolling stock materials -- Specification for monobloc wheels for traction and trailing

stock



for forged and rolled tyres



for wheelsets for traction and trailing stock


BS 5911-

1:2002+A2:2010

Concrete pipes and ancillary concrete

products -- Specification for unreinforced and reinforced concrete pipes (including jacking

pipes) and fittings with flexible joints (complementary to BS EN 1916:2002)

B/505 current

BS 5911-

4:2002+A2:2010


products -- Specification for unreinforced and reinforced concrete inspection chambers

(complementary to BS EN 1917:2002)

B/505 current

BS 5911-5:2004+A1:2010

Concrete pipes and ancillary concrete products -- Specification for prestressed non-

pressure pipes and fittings with flexible joints

B/505 current

BS 5911-

6:2004+A1:2010


products -- Specification for road gullies and gully cover slabs

B/505 current


of 20 January 2015

BS

5930:1999+A2:2010

Code of practice for site investigations B/526/3 partially replaced

by BS EN ISO 14688-1:2002, BS

EN ISO 14688-2:2004, BS EN

ISO 14689-

1:2003, BS EN ISO 22475-

1:2006, BS EN ISO 22476-

2:2005, BS EN ISO 22476-

3:2005, BS EN

1997-2:2007, BS EN ISO 22282-

1:2012, BS EN ISO 22282-

2:2012, BS EN

ISO 22282-3:2012, BS EN

ISO 22282-4:2012, BS EN

ISO 22282-

5:2012, BS EN ISO 22282-

6:2012, BS EN ISO 22476-

1:2012, BS EN ISO 22476-

7:2012, BS EN

ISO 22476-5:2012 and BS EN ISO

22476-4:2012

BS 5958-1:1991 Code of practice for control of undesirable static electricity -- General considerations

EXL/31 replaced by PD CLC/TR

50404:2003

BS 5974:2010 Code of practice for the planning, design,

setting up and use of temporary suspended

access equipment

B/514/39 current

BS 5977-1:1981 Lintels -- Method for assessment of load B/519/3 confirmed (2010)

BS 598-110:1998 Sampling and examination of bituminous

mixtures for roads and other paved areas --

Methods of test for the determination of wheel-tracking rate and depth

B/510/1 current

BS 598-112:2004 Sampling and examination of bituminous

mixtures for roads and other paved areas -- Method for the use of road surface hardness

probe


BS 5998:1983 Specification for quality levels for steel valve castings

PSE/18/1 confirmed (2007)

BS 5T 100:2010 Aerospace series. Procedure for inspection, testing and acceptance of seamless steel

tubes and tubestock

ACE/61 current

BS 6014:2003 Ethylene propylene rubber compounds.

Specification



of 20 January 2015

BS 6037-2:2004 Code of practice for the planning, design,

installation and use of permanently installed access equipment -- Travelling ladders and

gantries


BS 6072:1981 Method for magnetic particle flaw detection WEE/46 partially replaced

by BS EN ISO

9934-1:2001

BS 6079-1:2010 Project management -- Principles and

guidelines for the management of projects

MS/2 current

BS 6089:2010 Assessment of in-situ compressive strength

in structures and precast concrete

components. Complementary guidance to that given in BS EN 13791

B/517/1 current

BS 6100-0:2010 Building and civil engineering. Vocabulary -- Introduction and index

CB/101/-/2 current

BS 6165:2002 Specification for small disposable fire extinguishers of the aerosol type

FSH/2 confirmed (2010)

BS 6172:2010 Specification for installation, servicing and maintenance of domestic gas cooking

appliances (2nd and 3rd family gases)

GSE/30/-/10 current

BS 6200-2.1:1993 Sampling and analysis of iron, steel and

other ferrous metals. Sampling and sample

preparation -- Methods for iron and steel


BS 6200-3.0:2002 Sampling and analysis of iron, steel and

other ferrous metals. Methods of analysis -- Reference methods of analysis. Summary of

methods


BS

6213:2000+A1:2010

Selection of construction sealants. Guide B/547 current

BS 6349-2:2010 Maritime works -- Code of practice for the

design of quay walls, jetties and dolphins

CB/502 current

BS 6364:1984 Specification for valves for cryogenic service PSE/18/1 confirmed (2007)

BS 6371:1983 Recommendations for citation of unpublished

documents


BS 6381:1983 Specification for drawing boards TDW/4 confirmed (2010)

BS 64:1992 Specification for normal and high strength steel bolts and nuts for railway rail fishplates


BS 6404-20:1996 Magnetic materials -- Resistance and temperature classification of insulation

coatings


BS 641:1951 Dimensions of small rivets for general purposes

FME/9 obsolescent (2010)

BS 6465-4:2010 Sanitary installations -- Code of practice for

the provision of public toilets

B/209/-/2 current

BS 65:1991 Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for

use solely with surface water pipes and fittings


BS 6510:2010 Steel-framed windows and glazed doors. Specification

B/538/1 current

BS 6537:1984 Specification for staple type connectors for

hydraulic fluid power applications



of 20 January 2015

BS 6580:2010 Specification for corrosion inhibiting, engine

coolant concentrate ("antifreeze")

I/- current

BS 6626:2010 Maintenance of electrical switchgear and

controlgear for voltages above 1 kV and up

to and including 36 kV. Code of practice

PEL/17/1 current

BS 6656:2002 Assessment of inadvertent ignition of

flammable atmospheres by radio-frequency radiation. Guide

EXL/31 replaced by PD

CLC/TR 50427:2004

BS 6657:2002 Assessment of inadvertent initiation of bridge

wire electro-explosive devices by radio-frequency radiation. Guide

EXL/31 replaced by PD

CLC/TR 50426:2004

BS 6701:2010 Telecommunications equipment and telecommunications cabling. Specification for

installation, operation and maintenance

TCT/7 current

BS 6734:2004 Antimicrobial efficacy of disinfectants for veterinary and agricultural use. Method

CH/216 confirmed (2010)

BS 6788-2:1990 Neurosurgical implants -- Specification for

marking and packaging of implantable neural stimulators

CH/150/2 confirmed (2010)

BS 6806:2002 Textiles. Determination of formaldehyde.

Method for the determination of total and free (water extraction method) formaldehyde

using chromotropic acid


BS 6807:1986 Methods of test for the ignitability of

mattresses with primary and secondary sources of ignition

FW/6 replaced by BS

6807:1990

BS 6811-1.1:1987 Winding wires. Basic dimensions --

Specification for diameters of conductors for round winding wires

L/-/99 obsolescent

(2008)

BS 6888:1988 Methods for calibration of bonded electrical

resistance strain gauges


BS 6996:2003 Mineral oil resistant acrylonitrile-butadiene rubber compounds. Specification


BS 6999:1989 Specification for vitreous-enamelled low-carbon-steel flue pipes, other components

and accessories for solid-fuel-burning appliances with a rated output of 45 kW


BS 6S 100:2010 Aerospace series. Procedure for inspection, testing and acceptance of wrought steels

(other than plate, sheet, strip and tube)

ACE/61 current

BS 7000-2:2008 Design management systems -- Guide to

managing the design of manufactured products

TDW/4/7 current

BS 7000-3:1994 Design management systems -- Guide to managing service design

MS/4 current

BS 7014:1989 Guide to the romanization of Chinese IDT/2 confirmed (2010)

BS 7114-1:1988 Fireworks -- Classification of fireworks CII/47 obsolescent

(2010)

BS 7114-2:1988 Fireworks -- Specification for fireworks CII/47 obsolescent (2010)


of 20 January 2015

BS 7114-3:1988 Fireworks -- Methods of test for fireworks CII/47 partially replaced

by BS EN 14035 parts and DD

14035:2007

BS 7121-4:2010 Code of practice for safe use of cranes -- Lorry loaders

MHE/3/11 current

BS 7172:1989 Guide to assessment of position, size and

departure from nominal form of geometric features


BS

7188:1998+A2:2009

Impact absorbing playground surfacing.

Performance requirements and test methods

SW/65 confirmed (2010)

BS

7195:1989+A1:2010

Guide for prevention of corrosion of metals

caused by vapours from organic materials

PKW/0 current

BS 7270:2006 Metallic materials. Constant amplitude strain controlled axial fatigue. Method of test

ISE/101 current

BS 7272-1:2008 Writing and marking instruments -- Specification for caps to reduce the risk of

asphyxiation

TDW/4/-/2 current

BS 7291-1:2010 Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes

and heating installations in buildings -- General requirements

PRI/88 current

BS 7291-2:2010 Thermoplastics pipe and fitting systems for

hot and cold water for domestic purposes and heating installations in buildings --

Specification for polybutylene (PB) pipe and

associated fittings

PRI/88 current

BS 7291-3:2010 Thermoplastics pipe and fitting systems for

hot and cold water for domestic purposes and heating installations in buildings --

Specification for crosslinked polyethylene (PE-X) pipes and associated fittings

PRI/88 current

BS 7346-4:2003 Components for smoke and heat control

systems -- Functional recommendations and calculation methods for smoke and heat

exhaust ventilation systems, employing steady-state design fires. Code of practice


BS 7371-10:1994 Coatings on metal fasteners -- Specification for organic coatings


BS 7371-2:1993 Coatings on metal fasteners -- Specification

for torque/clamping force relationship


BS 7371-4:1994 Coatings on metal fasteners -- Specification for electroplated nickel, nickel/chromium and

copper/nickel/chromium coatings


BS 7371-7:2010 Coatings on metal fasteners -- Specification for mechanically applied zinc and zinc based

coatings

FME/9 current

BS 7371-9:1996 Coatings on metal fasteners -- Specification

for phosphate or phosphate and oil coatings


BS 7375:2010 Distribution of electricity on construction and

demolition sites. Code of practice

PEL/121/2 current


of 20 January 2015

BS 7448-3:2005 Fracture mechanics toughness tests --

Method for determination of fracture toughness of metallic materials at rates of

increase in stress intensity factor greater than 3.0 MPa m0.5 s-1

ISE/101 current

BS 7448-4:1997 Fracture mechanics toughness tests -- Method for determination of fracture

resistance curves and initiation values for

stable crack extension in metallic materials


BS 7533-10:2010 Pavements constructed with clay, natural

stone or concrete pavers -- Guide for the structural design of trafficked pavements

constructed of natural stone setts and bound construction with concrete paving blocks

B/507 current


stone or concrete pavers -- Code of practice for the construction of pavements of natural

stone paving units and cobbles, and rigid

construction with concrete block paving

B/507 current


stone or concrete pavers -- Code of practice for the construction of rigid pavements of

clay pavers

B/507 current

BS 7581:1992 Guide to presentation of tables and graphs IDT/2 confirmed (2010)

BS 7619:2010 Extruded cellular unplasticized white PVC

(PVC-UE) profiles. Specification

PRI/82 current

BS 7647:1993 Specification for radio teleswitches for tariff and load control

PEL/13 confirmed (2010)

BS 7654:2010 Specification for single-phase street lighting

cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating

for highway power supplies and street

furniture

PEL/121/1 current

BS 7657:2010 Specification for cut-out assemblies up to 100 A rating, for power supply to buildings

PEL/121/1 current

BS 7659:1994 Specification for dog muzzles GW/3 confirmed (2010)

BS 7668:2004 Weldable structural steels. Hot finished structural hollow sections in weather

resistant steels. Specification


BS 7722:2010 Surface covered PVC-U profiles for windows

and doorsets. Specification

B/538/1 current

BS 7805-1:1995 Swaged collar grooved rivets -- Specification for sizes up to and including 10 mm diameter


BS 7805-2:1997 Swaged collar grooved rivets -- Specification for sizes from 12.7 mm up to and including

34.9 mm


BS 7825-3.6:1997 Calibration of rubber and plastics test equipment. Calibration schedules --

Dimensional properties

PRI/20 obsolescent (2008)

BS 7837:1996 Specification for flammability performance for textiles used in the construction of marquees

and similar textile structures

TCI/66/-/8 confirmed (2008)


of 20 January 2015

BS 7855-1:1996 Metric rivets for the attachment of friction

linings -- Specification for semi-tubular rivets


BS 7865:1997 Specification for steel electrical conductor rail

for railway motive power supply


BS 7875:2009 Synthetic saddle trees. Specification SW/136 current

BS 7882:2008 Method for calibration and classification of

torque measuring devices

ISE/101 current

BS 7899-1:1997 Code of practice for assessment of hazard to

life and health from fire -- General guidance


BS 7899-2:1999 Code of practice for assessment of hazard to

life and health from fire -- Guidance on methods for the quantification of hazards to

life and health and estimation of time to incapacitation and death in fires


BS 7915:1998 Ergonomics of the thermal environment.

Guide to design and evaluation of working practices for cold indoor environments

PH/9 confirmed (2006)

BS 7956:2000 Specification for primers for woodwork STI/28 confirmed (2010)

BS 7963:2000 Ergonomics of the thermal environment.

Guide to the assessment of heat strain in workers wearing personal protective

equipment

PH/9 confirmed (2006)

BS 7967-5:2010 Carbon monoxide in dwellings and other

premises and the combustion performance of gas-fired appliances -- Guide for using

electronic portable combustion gas analysers in non-domestic premises for the

measurement of carbon monoxide and carbon dioxide levels and the determination

of combustion performance

GSE/30 current

BS 7971-1:2002 Protective clothing and equipment for use in violent situations and in training -- General

requirements

PH/3/12 confirmed (2007)

BS 7971-7:2003 Protective clothing and equipment for use in violent situations and in training -- Slash

resistant gloves. Requirements and test methods

PH/3/12 current

BS 799-5:2010 Oil burning equipment -- Carbon steel oil storage tanks. Specification

RHE/13 current

BS 7996:2009 Torque measuring devices. Calibration and classification using continual torque

application. Method

ISE/101 current

BS 8000-16:1997+A1:2010

Workmanship on building sites -- Code of practice for sealing joints in buildings using

sealants

B/547 partially replaced by BS 8000-

0:2014

BS 8000-2.2:1990 Workmanship on building sites. Code of practice for concrete work -- Sitework with in

situ and precast concrete

B/525/2 partially replaced by BS 8000-

0:2014

BS 8006-1:2010 Code of practice for strengthened/reinforced soils and other fills

B/526/4 current


of 20 January 2015

BS

8008:1996+A1:2008

Safety precautions and procedures for the

construction and descent of machine-bored shafts for piling and other purposes


BS 8204-1:2003+A1:2009

Screeds, bases and in situ floorings -- Concrete bases and cementitious levelling

screeds to receive floorings. Code of practice

CB/300 current

BS 8204-

6:2008+A1:2010

Screeds, bases and in situ floorings --

Synthetic resin floorings. Code of practice

CB/300 current

BS 822-6:2004 Terminal markings for electrical machinery

and apparatus -- Lead colours for rotating

electrical machinery


BS 826:1978 Specification for steel single tier bolted shelving (angle upright type)

MHE/8 confirmed (2008)

BS 8298-1:2010 Code of practice for the design and

installation of natural stone cladding and lining -- General

B/545 current

BS 8298-2:2010 Code of practice for the design and

installation of natural stone cladding and lining -- Traditional handset external cladding

B/545 current

BS 8298-3:2010 Code of practice for the design and installation of natural stone cladding and

lining -- Stone-faced pre-cast concrete cladding systems

B/545 current

BS 8298-4:2010 Code of practice for the design and installation of natural stone cladding and

lining -- Rainscreen and stone on metal

frame cladding systems

B/545 current

BS 8300:2009+A1:2010

Design of buildings and their approaches to meet the needs of disabled people. Code of

practice

B/559 current

BS 8303-1:1994 Installation of domestic heating and cooking

appliances burning solid mineral fuels --

Installation of domestic heating and cooking appliances burning solid mineral fuels.

Specification for the design of installations

RHE/28 current

BS 835:1973 Specification for asbestos-cement flue pipes and fittings, heavy quality


BS 842:1965 Specification for a.c. voltage-operated earth-leakage circuit breakers


BS 8422:2003 Force measurement. Strain gauge load cell

systems. Calibration method


BS 8423:2010 Fireguards for fires and heating appliances for domestic use. Specification

CW/1 current

BS 8427:2004 Jug water filter systems. Specification B/504 confirmed (2010)

BS 8428:2004 Protective clothing. Protection against liquid

chemicals. Performance requirements for

chemical protective suits with liquid-tight connections between different parts of the

clothing for emergency teams (type 3-ET equipment)

PH/3/3 confirmed (2010)

BS 8431:2010 Electrical static meters for secondary

metering and sub-metering. Specification

SEM/1 current


of 20 January 2015

BS

8438:2004+A1:2010

Troughed belt conveyors. Specification MHE/9 current

BS 8465:2010 Hydraulic fluid power. Monitoring the level of particulate contamination. Comparison

membrane technique

MCE/18 current

BS 8468-2:2006 Respiratory protective devices for use against chemical, biological, radiological and nuclear

(CBRN) agents -- Negative pressure, air purifying devices with full face mask.

Specification

PH/4 current

BS 8468-4:2008 Respiratory protective devices for use against

chemical, biological, radiological and nuclear (CBRN) agents -- Powered air-purifying

respirators. Specification

PH/4 current

BS 8488:2009+A1:2010

Prefabricated wiring systems intended for permanent connection in fixed installations.

Specification

PEL/23 current

BS 8491:2008 Method for assessment of fire integrity of large diameter power cables for use as

components for smoke and heat control

systems and certain other active fire safety systems

GEL/20/18 current

BS

8493:2008+A1:2010

Light reflectance value (LRV) of a surface.

Method of test

B/559 current

BS 8511:2010 Code of practice for the installation of solid fuel heating and cooking appliances in small

craft

RHE/28/-/1 current

BS 8517-2:2010 Security dogs -- Code of practice for the use of detection dogs

GW/3 current

BS 8519:2010 Selection and installation of fire-resistant

power and control cable systems for life safety and fire-fighting applications. Code of

practice

FSH/1 current

BS 8525-1:2010 Greywater systems -- Code of practice CB/506 current

BS 8529:2010 Composite doorsets. Domestic external

doorsets. Specification

B/538/2 current

BS 8530:2010 Traditional-style half round, beaded half round, Victorian ogee and moulded ogee

aluminium rainwater systems. Specification

B/542/6 current

BS 8536:2010 Facility management briefing. Code of

practice

FMW/1 current

BS 8537:2010 Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing

fittings for use with metallic tubes

NFE/34/3 current

BS 8580:2010 Water quality. Risk assessments for

Legionella control. Code of practice

EH/3/4 current

BS 8666:2005 Scheduling, dimensioning, bending and

cutting of steel reinforcement for concrete. Specification

ISE/104 current

BS 8766:2004 Names and identifiers of individuals and

groups. Data structure for interoperability. Specification

IST/36 confirmed (2010)

BS 8878:2010 Web accessibility. Code of practice IST/45 current


of 20 January 2015

BS 8887-220:2010 Design for manufacture, assembly,

disassembly and end-of-life processing (MADE) -- The process of remanufacture.

Specification

TDW/4 current

BS 8903:2010 Principles and framework for procuring

sustainably. Guide

SDS/1/3 current

BS 9295:2010 Guide to the structural design of buried pipelines

B/505 current

BS 959:2008 Specification for internal micrometers (including stick micrometers)

TDW/4 current

BS 9999:2008 Code of practice for fire safety in the design,

management and use of buildings

FSH/14 current

BS A 400:2010 Specification for nuts, plain and slotted (unified hexagons and unified threads) for

shear bolts for aircraft in corrosion-resisting steel

ACE/12 current

BS AU 170:1979 Methods for measurement of reflectance of rear view mirrors

AUE/12 confirmed (2010)

CP 2010-2:1970 Code of practice for pipelines -- Design and construction of steel pipelines in land

PSE/17 confirmed (2010)

CP 2012-1:1974 Code of practice for foundations for

machinery -- Foundations for reciprocating machines


DD 253:2001 Mouthguards for use in sport and recreation.

Requirements and test methods

PH/3/11 current

DD 263:2010 Intruder and hold-up alarm systems.

Commissioning, maintenance and remote support. Code of practice

GW/1/2 current

DD 8489-5:2011 Fixed fire protection systems. Industrial and commercial watermist systems -- Tests and

requirements for watermist systems for the protection of combustion turbines and

machinery spaces with volumes up to and

including 80 m$u3

FSH/18 current

PD 0006:1995 Technical guide to JPEG. Digital compression of photographic images


PD 0017:2001 Business documents. Guidance on effective

layout and presentation


PD 0018:2001 Information management systems. Building systems fit for audit

ICT/- confirmed (2010)

PD 0028:2002 Quantitative software management. Software

measurement methods. A guide to the use of ISO/IEC and other standards for obtaining

and using software measurements for

product and process improvement


PD 25111:2010 Business continuity management. Guidance

on human aspects of business continuity

BCM/1 current

PD 25666:2010 Business continuity management. Guidance on exercising and testing for continuity and

contingency programmes

BCM/1 current

PD 6433:1969 Guide to the application of stress analysis to

design



of 20 January 2015

PD 6439:1969 A review of the methods of calculating

stresses due to local loads and local attachments of pressure vessels


PD 6461-4:2004 General metrology -- Practical guide to measurement uncertainty

SS/6 confirmed (2010)

PD 6503-2:1988 Toxicity of combustion products -- Guide to

the relevance of small-scale tests for measuring the toxicity of combustion

products of materials and composites


PD 6512-3:1987 Use of elements of structural fire protection

with particular reference to the recommendations given in BS 5588 'Fire

precautions in the design and construction of buildings' -- Guide to the fire performance of

glass

FSH/14 current

PD 6531:2010 Queries and interpretations on BS 5839-1 FSH/12/1 current

PD 6612:2004 Guidance on the preparation of codes of practice for building

CB/10 current

PD 6631:1998 Technical guide to ISO/IEC 13522-5:1997.

Information technology. Coding of

multimedia and hypermedia information. Support for base-level interactive applications

(MHEG-5)


PD 6662:2010 Scheme for the application of European

standards for intrusion and hold-up alarm systems

GW/1/2 current

PD 6682-7:2003 Aggregates -- Armourstone. Guidance on the

use of BS EN 13383

B/502 current

PD 6687-1:2010 Background paper to the National Annexes to BS EN 1992-1 and BS EN 1992-3

B/525/2 current

PD 6697:2010 Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN

1996-2

B/525/6 current

PD 6699-3:2010 Nanotechnologies -- Guide to assessing

airborne exposure in occupational settings

relevant to nanomaterials

NTI/1 current

PD 6777:2003 Guide to practical implementation of JPEG 2000


BS identifier BS Title Committee Status Final Review...

Documents

Transcript of BS identifier BS Title Committee Status Final Review...