BS Code Guide

BS EN ISO 21670 ................................................17BS EN ISO 23953 ................................................22BS EN 25580 ......................................................17DD ENV 1591 .....................................................10BS ISO 76 ...........................................................22BS ISO 113 .........................................................22BS ISO 155 .........................................................22BS ISO 199 .........................................................22BS ISO 254 .........................................................22BS ISO 461 .........................................................17BS ISO 1122 .......................................................22BS ISO 1919 .......................................................22BS ISO 2344 .......................................................22BS ISO 2534 .......................................................22BS ISO 2704 .......................................................22BS ISO 4010 .......................................................22BS ISO 4126 .......................................................12BS ISO 4411 .......................................................12BS ISO 5389 .......................................................22BS ISO 5391 .......................................................22BS ISO 6264 .......................................................22BS ISO 6535 .................................................12, 19BS ISO 6621 .......................................................22BS ISO 6622 .......................................................22BS ISO 6624 .......................................................22BS ISO 6966 .......................................................23BS ISO 6968 .......................................................23BS ISO 7063 .......................................................23BS ISO 7146 .......................................................12BS ISO 7654 .......................................................23BS ISO 8404 .......................................................23BS ISO 8443 .......................................................23BS ISO 9981 .......................................................23BS ISO 9982 .......................................................23BS ISO 10054 .....................................................23BS ISO 10129 .....................................................12BS ISO 11500 .....................................................12BS ISO 11901 .....................................................23BS ISO 12140 .....................................................23BS ISO 12745 .....................................................14BS ISO 13203 .....................................................23BS ISO 13357 .....................................................23BS ISO 13556 .....................................................23BS ISO 14469 .....................................................23BS ISO 14681 .....................................................23BS ISO 14794 .....................................................23BS ISO 15312 .....................................................23BS ISO 16860 .....................................................23BS ISO 16915 .....................................................23BS ISO 17080 .....................................................23BS ISO 17559 .....................................................24BS ISO 17584 .....................................................24BS ISO 18084 .....................................................24BS ISO 18653 .....................................................24BS ISO 19438 .....................................................24BS ISO 21009 .....................................................14BS ISO 24347 .....................................................24BS ISO 26322 .....................................................14BS 2A 296 ..........................................................24BS A 305 ............................................................24BS 4G 173 ..........................................................24BS 2G 219 ..........................................................24BS 2M 52 ...........................................................24BS M 55 .............................................................24BS M 57 .............................................................24BS M 61 .............................................................24BS M 66 .............................................................24BS HC 404 ..........................................................18BS 3SP 89 ...........................................................24BS AU 259 ..........................................................24

BS EN 60289 ......................................................11BS EN 60317 ......................................................11BS EN 60491 ......................................................19BS EN 60730 ................................................11, 19BS EN 61300 ......................................................12BS EN 61754 ......................................................12BS EN 61810 ......................................................19BS EN 61970 ......................................................12BS EN 61996 ......................................................12BS EN 62031 ......................................................12BS IEC 60870 ......................................................14DD IEC/PAS 62396 ..............................................14DD IEC/PAS 62588 ..............................................14DD IEC/TS 62396 ................................................14

EngineeringBS 4361 ..............................................................19BS 5655 ..............................................................17BS 6607 ..............................................................20BS 6916 ........................................................12, 19BS 7020 ..............................................................20BS 7745 ..............................................................20DD CEN/TS 15053 ..............................................17DD CEN ISO/TS 21432 ........................................17BS EN 444 ..........................................................16BS EN 462 ..........................................................16BS EN 583 ..........................................................16BS EN 1124 ..........................................................8BS EN 1301 ........................................................10BS EN 1330 ........................................................16BS EN 1518 ........................................................16BS EN 1591 ........................................................10BS EN 1593 ........................................................16BS EN 1715 ........................................................10BS EN 1779 ........................................................16BS EN ISO 2342 ..................................................16BS EN ISO 3452 ..................................................16BS EN ISO 3953 ..................................................20BS EN ISO 4026 ..................................................16BS EN ISO 4027 ..................................................16BS EN ISO 4028 ..................................................16BS EN ISO 4029 ..................................................16BS EN ISO 4126 ..................................................20BS EN ISO 4934 ..................................................20BS EN ISO 7048 ..................................................16BS EN ISO 10664 ................................................16BS EN ISO 10806 ................................................20BS EN 12223 ......................................................16BS EN 12409 ......................................................10BS EN 12421 ......................................................16BS EN 12543 ......................................................16BS EN 12544 ................................................16, 17BS EN 12679 ......................................................17BS EN 13068 ......................................................17BS EN 13348 ......................................................10BS EN 13802 ......................................................21BS EN 13925 ......................................................17BS EN 13927 ......................................................17BS EN 13957 ......................................................10BS EN 13958 ......................................................11BS EN 14096 ......................................................17BS EN 14218 ......................................................17BS EN 14219 ......................................................17BS EN ISO 14935 ................................................21BS EN ISO 15065 ................................................17BS EN 15093 ......................................................11BS EN 15094 ......................................................11BS EN 15272 ......................................................11BS EN ISO 16047 ................................................17BS EN ISO 20783 ................................................21

The following British Standards are listed orreferred to in this issue of Update Standardswith the exception of those in ‘New WorkStarted’.

Building and civil engineering

BS 598 ..........................................................15, 18BS 4211 ..............................................................15BS 6088 ..............................................................17BS 6282 ..............................................................18BS 7412 ..............................................................19BS 8100 ..............................................................16BS 8110 ..............................................................18BS 8493 ................................................................8DD 213 ...............................................................18BS EN 975 ..........................................................20BS EN 1917 ........................................................15BS EN 12273 ......................................................10BS EN 12808 ......................................................10BS EN ISO 13789 ................................................10BS EN 13959 ................................................15, 18BS EN 13990 ......................................................21BS EN 14076 ......................................................21BS EN 14317 ......................................................11BS EN 14451 ................................................15, 18BS EN 15603 ......................................................11DD ENV 14464 ...................................................21BS ISO 29470 .....................................................14PD CEN/TR 15728 ...............................................14

Consumer products and servicesBS 969 ..................................................................8BS 4540 ..............................................................19BS 4585 ..............................................................19BS EN 1116 ........................................................20BS EN 1177 ..........................................................8BS EN 1957 ........................................................20BS EN 13721 ......................................................21BS EN 13722 ......................................................21BS EN 14073 ......................................................21BS EN 14074 ......................................................21BS EN 15570 ......................................................11BS ISO 5 .............................................................22BS ISO 762 .........................................................22BS ISO 763 .........................................................22BS ISO 855 .........................................................22BS ISO 2173 .......................................................22BS ISO 2240 .......................................................22BS ISO 3519 .......................................................22BS ISO 3761 .......................................................22BS ISO 8899 .......................................................23BS ISO 8900 .......................................................23BS ISO 9848 .......................................................23BS ISO 14717 .....................................................14BS ISO 16067 .....................................................23BS ISO 16212 .....................................................14BS ISO 18929 .....................................................24BS ISO 18938 .....................................................14BS ISO 20462 .....................................................24BS ISO 21093 .....................................................24BS ISO 21390 .....................................................24BS ISO 22234 .....................................................24

ElectrotechnicalBS 697 ................................................................17BS 5266 ................................................................8BS 7288 ..............................................................16BS EN 13757 ......................................................10BS EN 60065 ......................................................19BS EN 60076 ......................................................11BS EN 60255 ......................................................11

British Standards – Quick Reference Guide

4 Update Standards Dec 2008Prices may be subject to change.

BIP 2139 .............................................................15BIP 2181 .............................................................15DD 213 ...............................................................18DD CEN/TS 15053 ..............................................17DD CEN ISO/TS 21432 ........................................17DD CEN ISO/TS 27687 ........................................14BS EN ISO 105 ....................................................20BS EN ISO 150 ....................................................20BS EN 444 ..........................................................16BS EN 462 ..........................................................16BS EN 583 ..........................................................16BS EN 589 ............................................................8BS EN ISO 648 ................................................8, 18BS EN 725 ............................................................8BS EN ISO 787 ....................................................20BS EN 927 ............................................................8BS EN 975 ..........................................................20BS EN 1018 ..........................................................8BS EN 1019 ..........................................................8BS EN 1116 ........................................................20BS EN 1124 ..........................................................8BS EN 1177 ..........................................................8BS EN ISO 1248 ..................................................20BS EN 1301 ........................................................10BS EN 1330 ........................................................16BS EN 1518 ........................................................16BS EN 1591 ........................................................10BS EN 1593 ........................................................16BS EN 1715 ........................................................10BS EN 1779 ........................................................16BS EN 1917 ........................................................15BS EN 1957 ........................................................20BS EN ISO 2342 ..................................................16BS EN ISO 2360 ..................................................20BS EN ISO 3175 ..................................................20BS EN ISO 3262 ..................................................20BS EN ISO 3382 ..................................................10BS EN ISO 3452 ..................................................16BS EN ISO 3953 ..................................................20BS EN ISO 4026 ..................................................16BS EN ISO 4027 ..................................................16BS EN ISO 4028 ..................................................16BS EN ISO 4029 ..................................................16BS EN ISO 4126 ..................................................20BS EN ISO 4618 ..................................................20BS EN ISO 4684 ..................................................20BS EN ISO 4934 ..................................................20BS EN ISO 6401 ..................................................10BS EN ISO 7048 ..................................................16BS EN ISO 8502 ..................................................18BS EN ISO 10081 ....................................15, 19, 20BS EN ISO 10664 ................................................16BS EN ISO 10806 ................................................20BS EN ISO 10931 ................................................21BS EN ISO 11890 ................................................10BS EN 12223 ......................................................16BS EN 12273 ......................................................10BS EN 12409 ......................................................10BS EN 12421 ......................................................16BS EN 12475 ......................................................19BS EN 12543 ......................................................16BS EN 12544 ................................................16, 17BS EN 12563 ................................................11, 19BS EN 12679 ......................................................17BS EN 12808 ......................................................10BS EN 12882 ......................................................10BS EN 12911 ......................................................10BS EN 13068 ......................................................17BS EN 13348 ......................................................10BS EN 13721 ......................................................21

BS EN ISO 21181 ................................................22BS EN ISO 21182 ................................................22BS EN ISO 21183 ................................................22DD ENV 927 .........................................................8BS ISO 124 ...................................................12, 18BS ISO 1170 .......................................................12BS ISO 1505 .......................................................22BS ISO 2385 .......................................................22BS ISO 6743 .......................................................22BS ISO 8007 .......................................................23BS ISO 8008 .......................................................23BS ISO 9276 .......................................................12BS ISO 9588 .......................................................12BS ISO 9947 .......................................................23BS ISO 10059 .....................................................23BS ISO 10458 .....................................................23BS ISO 10952 .....................................................12BS ISO 14595 .....................................................17BS ISO 15112 .....................................................14BS ISO 15237 .....................................................23BS ISO 15238 .....................................................23BS ISO 15970 .....................................................14BS ISO 17455 .....................................................24BS ISO 17470 .....................................................17BS ISO 18114 .....................................................17BS ISO 18573 .....................................................24BS ISO 19334 .....................................................24BS ISO 20203 .....................................................24BS ISO 20508 .....................................................24BS ISO 22029 .....................................................24BS ISO 22493 .....................................................14BS ISO 23380 .....................................................14PD ISO/TR 11150 ................................................14

Alpha-numeric sequence of BritishStandards quoted in this issue

BS 598 ..........................................................15, 18BS 697 ................................................................17BS 969 ..................................................................8BS 1583 ..........................................................8, 18BS 3483 ........................................................19, 20BS 4211 ..............................................................15BS 4361 ..............................................................19BS 4540 ..............................................................19BS 4585 ..............................................................19BS 5072 ..............................................................20BS 5266 ................................................................8BS 5655 ..............................................................17BS 5724 ..............................................................18BS 6057 ........................................................12, 18BS 6088 ..............................................................17BS 6282 ..............................................................18BS 6607 ..............................................................20BS 6902 ........................................................11, 18BS 6916 ........................................................12, 19BS 7020 ..............................................................20BS 7083 ..............................................................17BS 7288 ..............................................................16BS 7412 ..............................................................19BS 7445 ..............................................................16BS 7745 ..............................................................20BS 8100 ..............................................................16BS 8110 ..............................................................18BS 8493 ................................................................8BS 25999 ..............................................................8BS 31100 ..............................................................8BIP 0026 .............................................................15BIP 0096 .............................................................15BIP 2034 .............................................................15BIP 2082 .............................................................15

Health and environment

BS 5724 ..............................................................18BS 6902 ........................................................11, 18BS 7445 ..............................................................16BS EN ISO 3382 ..................................................10BS EN 12563 ................................................11, 19BS EN 15004 ................................................11, 19BS EN 15446 ......................................................11BS EN ISO 21535 ..........................................11, 19BS EN 45502 ................................................11, 18BS EN 60601 ......................................................18BS ISO 5667 .......................................................12BS ISO 14520 ...............................................11, 19

Information systems

BS 7083 ..............................................................17BS EN ISO 18104 ................................................21BS EN ISO 19112 ................................................21BS EN ISO 19133 ................................................21BS EN ISO 19135 ................................................21BS ISO/IEC 7816 .................................................23BS ISO/IEC 11694 ...............................................14BS ISO/IEC 13249 ...............................................23BS ISO 19128 .....................................................24PD ISO/IEC TR 90005 ..........................................14

Materials and chemicals

BS 1583 ..........................................................8, 18BS 3483 ........................................................19, 20BS 5072 ..............................................................20BS 6057 ........................................................12, 18DD CEN ISO/TS 27687 ........................................14BS EN ISO 105 ....................................................20BS EN ISO 150 ....................................................20BS EN 589 ............................................................8BS EN ISO 648 ................................................8, 18BS EN 725 ............................................................8BS EN ISO 787 ....................................................20BS EN 927 ............................................................8BS EN 1018 ..........................................................8BS EN 1019 ..........................................................8BS EN ISO 1248 ..................................................20BS EN ISO 2360 ..................................................20BS EN ISO 3175 ..................................................20BS EN ISO 3262 ..................................................20BS EN ISO 4618 ..................................................20BS EN ISO 4684 ..................................................20BS EN ISO 6401 ..................................................10BS EN ISO 8502 ..................................................18BS EN ISO 10081 ....................................15, 19, 20BS EN ISO 10931 ................................................21BS EN ISO 11890 ................................................10BS EN 12475 ......................................................19BS EN 12882 ......................................................10BS EN 12911 ......................................................10BS EN ISO 14419 ................................................21BS EN ISO 15236 ................................................21BS EN 15688 ......................................................11BS EN ISO 15732 ................................................21BS EN ISO 15874 ................................................21BS EN ISO 15875 ................................................21BS EN ISO 15876 ................................................21BS EN ISO 17834 ................................................21BS EN ISO 18756 ................................................21BS EN ISO 18757 ................................................21BS EN ISO 19954 ................................................21BS EN ISO 21178 ................................................21BS EN ISO 21179 ................................................21BS EN ISO 21180 ................................................21

Update Standards Dec 2008 Prices may be subject to change. 5

British Standards – Quick Reference Guide continued...

BS ISO 14520 ...............................................11, 19

BS ISO 14595 .....................................................17

BS ISO 14681 .....................................................23

BS ISO 14717 .....................................................14

BS ISO 14794 .....................................................23

BS ISO 15112 .....................................................14

BS ISO 15237 .....................................................23

BS ISO 15238 .....................................................23

BS ISO 15312 .....................................................23

BS ISO 15970 .....................................................14

BS ISO 16067 .....................................................23

BS ISO 16212 .....................................................14

BS ISO 16860 .....................................................23

BS ISO 16915 .....................................................23

BS ISO 17080 .....................................................23

BS ISO 17455 .....................................................24

BS ISO 17470 .....................................................17

BS ISO 17559 .....................................................24

BS ISO 17584 .....................................................24

BS ISO 18084 .....................................................24

BS ISO 18114 .....................................................17

BS ISO 18573 .....................................................24

BS ISO 18653 .....................................................24

BS ISO 18929 .....................................................24

BS ISO 18938 .....................................................14

BS ISO 19128 .....................................................24

BS ISO 19334 .....................................................24

BS ISO 19438 .....................................................24

BS ISO 20203 .....................................................24

BS ISO 20462 .....................................................24

BS ISO 20508 .....................................................24

BS ISO 21009 .....................................................14

BS ISO 21093 .....................................................24

BS ISO 21390 .....................................................24

BS ISO 22029 .....................................................24

BS ISO 22234 .....................................................24

BS ISO 22493 .....................................................14

BS ISO 23380 .....................................................14

BS ISO 24347 .....................................................24

BS ISO 26322 .....................................................14

BS ISO 29470 .....................................................14

BS IEC 60870 ......................................................14

DD IEC/PAS 62396 ..............................................14

DD IEC/PAS 62588 ..............................................14

DD IEC/TS 62396 ................................................14

PD CEN/TR 15728 ...............................................14

PD ISO/TR 11150 ................................................14

PD ISO/IEC TR 90005 ..........................................14

BS 2A 296 ..........................................................24

BS A 305 ............................................................24

BS 4G 173 ..........................................................24

BS 2G 219 ..........................................................24

BS 2M 52 ...........................................................24

BS M 55 .............................................................24

BS M 57 .............................................................24

BS M 61 .............................................................24

BS M 66 .............................................................24

BS HC 404 ..........................................................18

BS 3SP 89 ...........................................................24

BS AU 259 ..........................................................24

PAS 67 ................................................................15

PAS 220 ..............................................................15

DD ENV 1591 .....................................................10DD ENV 14464 ...................................................21BS ISO 5 .............................................................22BS ISO 76 ...........................................................22BS ISO 113 .........................................................22BS ISO 124 ...................................................12, 18BS ISO 155 .........................................................22BS ISO 199 .........................................................22BS ISO 254 .........................................................22BS ISO 461 .........................................................17BS ISO 762 .........................................................22BS ISO 763 .........................................................22BS ISO 855 .........................................................22BS ISO 1122 .......................................................22BS ISO 1170 .......................................................12BS ISO 1505 .......................................................22BS ISO 1919 .......................................................22BS ISO 2173 .......................................................22BS ISO 2240 .......................................................22BS ISO 2344 .......................................................22BS ISO 2385 .......................................................22BS ISO 2534 .......................................................22BS ISO 2704 .......................................................22BS ISO 3519 .......................................................22BS ISO 3761 .......................................................22BS ISO 4010 .......................................................22BS ISO 4126 .......................................................12BS ISO 4411 .......................................................12BS ISO 5389 .......................................................22BS ISO 5391 .......................................................22BS ISO 5667 .......................................................12BS ISO 6264 .......................................................22BS ISO 6535 .................................................12, 19BS ISO 6621 .......................................................22BS ISO 6622 .......................................................22BS ISO 6624 .......................................................22BS ISO 6743 .......................................................22BS ISO 6966 .......................................................23BS ISO 6968 .......................................................23BS ISO 7063 .......................................................23BS ISO 7146 .......................................................12BS ISO 7654 .......................................................23BS ISO/IEC 7816 .................................................23BS ISO 8007 .......................................................23BS ISO 8008 .......................................................23BS ISO 8404 .......................................................23BS ISO 8443 .......................................................23BS ISO 8899 .......................................................23BS ISO 8900 .......................................................23BS ISO 9276 .......................................................12BS ISO 9588 .......................................................12BS ISO 9848 .......................................................23BS ISO 9947 .......................................................23BS ISO 9981 .......................................................23BS ISO 9982 .......................................................23BS ISO 10054 .....................................................23BS ISO 10059 .....................................................23BS ISO 10129 .....................................................12BS ISO 10458 .....................................................23BS ISO 10952 .....................................................12BS ISO 11500 .....................................................12BS ISO/IEC 11694 ...............................................14BS ISO 11901 .....................................................23BS ISO 12140 .....................................................23BS ISO 12745 .....................................................14BS ISO 13203 .....................................................23BS ISO/IEC 13249 ...............................................23BS ISO 13357 .....................................................23BS ISO 13556 .....................................................23BS ISO 14469 .....................................................23

BS EN 13722 ......................................................21BS EN 13757 ......................................................10BS EN ISO 13789 ................................................10BS EN 13802 ......................................................21BS EN 13925 ......................................................17BS EN 13927 ......................................................17BS EN 13957 ......................................................10BS EN 13958 ......................................................11BS EN 13959 ................................................15, 18BS EN 13990 ......................................................21BS EN 14073 ......................................................21BS EN 14074 ......................................................21BS EN 14076 ......................................................21BS EN 14096 ......................................................17BS EN 14218 ......................................................17BS EN 14219 ......................................................17BS EN 14317 ......................................................11BS EN ISO 14419 ................................................21BS EN 14451 ................................................15, 18BS EN ISO 14935 ................................................21BS EN 15004 ................................................11, 19BS EN ISO 15065 ................................................17BS EN 15093 ......................................................11BS EN 15094 ......................................................11BS EN ISO 15236 ................................................21BS EN 15272 ......................................................11BS EN 15446 ......................................................11BS EN 15570 ......................................................11BS EN 15603 ......................................................11BS EN 15688 ......................................................11BS EN ISO 15732 ................................................21BS EN ISO 15874 ................................................21BS EN ISO 15875 ................................................21BS EN ISO 15876 ................................................21BS EN ISO 16047 ................................................17BS EN ISO 17834 ................................................21BS EN ISO 18104 ................................................21BS EN ISO 18756 ................................................21BS EN ISO 18757 ................................................21BS EN ISO 19112 ................................................21BS EN ISO 19133 ................................................21BS EN ISO 19135 ................................................21BS EN ISO 19954 ................................................21BS EN ISO 20783 ................................................21BS EN ISO 21178 ................................................21BS EN ISO 21179 ................................................21BS EN ISO 21180 ................................................21BS EN ISO 21181 ................................................22BS EN ISO 21182 ................................................22BS EN ISO 21183 ................................................22BS EN ISO 21535 ..........................................11, 19BS EN ISO 21670 ................................................17BS EN ISO 23953 ................................................22BS EN 25580 ......................................................17BS EN 45502 ................................................11, 18BS EN 60065 ......................................................19BS EN 60076 ......................................................11BS EN 60255 ......................................................11BS EN 60289 ......................................................11BS EN 60317 ......................................................11BS EN 60491 ......................................................19BS EN 60601 ......................................................18BS EN 60730 ................................................11, 19BS EN 61300 ......................................................12BS EN 61754 ......................................................12BS EN 61810 ......................................................19BS EN 61970 ......................................................12BS EN 61996 ......................................................12BS EN 62031 ......................................................12DD ENV 927 .........................................................8

Alpha-numeric Sequence of British Standards continued...


BS EN 927:—Paints and varnishes. Coating materials andcoating systems for exterior wood

BS EN 927-2:2006Performance specification

supersedes DD ENV 927-2:2000ISBN 978 0 580 56014 9£40.00 members, £80.00 non-members

STI/28

BS EN 927-3:2006Natural weathering test

supersedes BS EN 927-3:2000ISBN 978 0 580 56078 1£57.00 members, £114.00 non-members

STI/28

BS EN 927-5:2006Assessment of the liquid water permeability


STI/28

BS EN 927-6:2006Exposure of wood coatings to artificialweathering using fluorescent UV lamps andwater

no current standard is supersededISBN 978 0 580 55269 4£40.00 members, £80.00 non-members

STI/28

BS EN 1018:2006Chemicals used for treatment of water intendedfor human consumption. Calcium carbonate

supersedes BS EN 1018:1998ISBN 978 0 580 57136 7£32.00 members, £64.00 non-members

CII/59

BS EN 1019:2005Chemicals used for treatment of water intendedfor human consumption. Sulfur dioxide


CII/59

BS EN 1124:—Pipes and fittings of longitudinally weldedstainless steel pipes with spigot and socket forwaste water systems

BS EN 1124-3:2008System X. Dimensions


ISE/8

BS EN 1177:2008Impact attenuating playground surfacing.Determination of critical fall height

supersedes BS EN 1177:1998 which remains currentISBN 978 0 580 55368 4£40.00 members, £80.00 non-members

SW/65

BS 25999:—Business continuity management

BS 25999-1:2006 (German)Code of practice (German translation ofBS 25999-1:2006)


BCM/1

BS 25999-2:2007 (German)Specification (German translation of BS 25999-2:2007)


BCM/1/-/2

BS 31100:2008Risk management. Code of practice


RM/1

BS EN PUBLICATIONS

The following are British Standardimplementations of the English languageversions of European Standards (ENs).

BSI has an obligation to publish all ENsand to withdraw any conflicting BritishStandards. This has led to a series ofstandards, BS ENs, using the EN number.

Note: The date referenced in theidentifier is the date of the Europeanstandard.

BS EN 589:2008Automotive fuels. LPG. Requirements and testmethods


PTI/15

BS EN ISO 648:2008Laboratory glassware. Single-volume pipettes

supersedes BS 1583:1986ISBN 978 0 580 58559 3£40.00 members, £80.00 non-members

LBI/36/1

BS EN 725:—Advanced technical ceramics. Methods of testfor ceramic powders

BS EN 725-3:2007Determination of the oxygen content ofnonoxides by thermal extraction with a carriergas


RPI/13

BRITISH STANDARDS

The following British Standardpublications are available fromBSI Customer Services (see ’How to order’on page 2).

The publications listed below are newand revised British Standards that weremade available last month.

An existing BSI publication bearing anumber identical to one announcedbelow is automatically withdrawn unlessstated otherwise.

In all other cases of supersession, detailsare given and a corresponding entryappears in the ’British Standardswithdrawn’ section.

BRITISH STANDARD IMPLEMENTATIONSWILL BE SUPPLIED IN PREFERENCE TOEUROPEAN OR INTERNATIONALSTANDARDS, UNLESS OTHERWISEREQUESTED.

Please order by the British Standardreference not the ISBN number.

BS 2000 series standards are also availablefrom:–Library of the Energy Institute61 New Cavendish StreetLondon W1G 7ARTel: 020 7467 7100Fax: 020 7255 1472Email: [email protected] this series, member pricing isapplicable to BSI and Energy Institutemembers.

BS 969:2008Specification for limits and tolerances on plainlimit gauges

supersedes BS 969:1982ISBN 978 0 580 61998 4£40.00 members, £80.00 non-members

TDW/4

BS 5266-10:2008Guide to the design and provision ofemergency lighting to reduce the risks fromhazards in the event of failure of the normallighting supply


CPL/34/9

BS 8493:2008Light reflectance value (LRV) of a surface.Method of test


B/559

British Standards


BS EN 12882:2008Conveyor belts for general purpose use.Electrical and flammability safety requirements


PRI/67

BS EN 12911:2006Products used for treatment of water intendedfor human consumption. Manganese greensand


CII/59

BS EN 13348:2008Copper and copper alloys. Seamless, roundcopper tubes for medical gases or vacuum


NFE/34/1

BS EN 13757:—Communication systems for meters and remotereading of meters

BS EN 13757-6:2008Local Bus


PEL/894

BS EN ISO 13789:2007Thermal performance of buildings. Transmissionand ventilation heat transfer coefficients.Calculation method

supersedes BS EN ISO 13789:1999ISBN 978 0 580 54446 0£57.00 members, £114.00 non-members

B/540

BS EN 13957:2008Aluminium and aluminium alloys. Extrudedround, coiled tube for general applications.Specification


NFE/35

BS EN ISO 6401:2008Plastics. Poly(vinyl chloride). Determination ofresidual vinyl chloride monomer. Gas-chromatographic method

supersedes BS EN ISO 6401:2004ISBN 978 0 580 57207 4£32.00 members, £64.00 non-members

PRI/21

BS EN ISO 11890:—Paints and varnishes. Determination of volatileorganic compound (VOC) content

BS EN ISO 11890-1:2007Difference method

supersedes BS EN ISO 11890-1:2001ISBN 978 0 580 55941 9£40.00 members, £80.00 non-members

STI/10

BS EN 12273:2008Slurry surfacing. Requirements


B/510/2

BS EN 12409:2008Plastics and rubber machines. Thermoformingmachines. Safety requirements


MCE/3/2

BS EN 12808:—Grouts for tiles

BS EN 12808-1:2008Determination of chemical resistance ofreaction resin mortars


B/539

BS EN 12808-2:2008Determination of resistance to abrasion


B/539

BS EN 12808-3:2008Determination of flexural and compressivestrength


B/539

BS EN 12808-5:2008Determination of water absorption


B/539

BS EN 1301:—Aluminium and aluminium alloys. Drawn wire

BS EN 1301-1:2008Technical conditions for inspection and delivery


NFE/35

BS EN 1301-2:2008Mechanical properties


NFE/35

BS EN 1301-3:2008Tolerances on dimensions


NFE/35

BS EN 1591:—Flanges and their joints. Design rules forgasketed circular flange connections

BS EN 1591-2:2008Gasket parameters

supersedes DD ENV 1591-2:2001ISBN 978 0 580 56594 6£80.00 members, £160.00 non-members

PSE/15

BS EN 1715:—Aluminium and aluminium alloys. Drawingstock

BS EN 1715-1:2008General requirements and technical conditionsfor inspection and delivery


NFE/35

BS EN 1715-4:2008Specific requirements for welding applications


NFE/35

BS EN ISO 3382:—Acoustics. Measurement of room acousticparameters

BS EN ISO 3382-2:2008Reverberation time in ordinary rooms

partially supersedes BS EN ISO 3382:2000ISBN 978 0 580 53586 4£57.00 members, £114.00 non-members

EH/1/6

BS EN Publications continued...


e-mail

your order

[email protected]

BS EN 45502:—Active implantable medical devices

BS EN 45502-2-2:2008Particular requirements for active implantablemedical devices intended to treattachyarrhythmia (includes implantabledefibrillators)

supersedes BS 6902-1:1990 and BS 6902-1:Supplement No. 1:1996ISBN 978 0 580 53918 3£90.00 members, £180.00 non-members

CH/150/6

BS EN 60076:—Power transformers

BS EN 60076-6:2008Reactors

supersedes BS EN 60289:1995 which remainscurrentISBN 978 0 580 55392 9£98.00 members, £196.00 non-members

PEL/14

BS EN 60255:—Measuring relays and protection equipment

BS EN 60255-22-3:2008Electrical disturbance tests. Radiatedelectromagnetic field immunity

supersedes BS EN 60255-22-3:2001ISBN 978 0 580 56752 0£40.00 members, £80.00 non-members

PEL/95

BS EN 60317:—Specifications for particular types of windingwires

BS EN 60317-0-1:2008General requirements. Enamelled round copperwire


GEL/55

BS EN 60730:—Automatic electrical controls for household andsimilar use

BS EN 60730-2-6:2008Particular requirements for automatic electricalpressure sensing controls including mechanicalrequirements

supersedes BS EN 60730-2-6:1995 which remainscurrentISBN 978 0 580 54106 3£57.00 members, £114.00 non-members

CPL/72

BS EN 15094:2008Safety of machinery. Safety requirements forcold flat rolling mills


MCE/23

BS EN 15272:—Inland navigation vessels. Equipment for ropeleading

BS EN 15272-3:2007Roller fairleads


SME/32/-/7

BS EN 15446:2008Fugitive and diffuse emissions of commonconcern to industry sectors. Measurement offugitive emission of vapours generating fromequipment and piping leaks


EH/2/1

BS EN 15570:2008Hardware for furniture. Strength and durabilityof hinges and their components. Hingespivoting on a vertical axis


FW/0/1

BS EN 15603:2008Energy performance of buildings. Overallenergy use and definition of energy ratings


B/540

BS EN 15688:2008Fertilizers. Determination of urease inhibitor N-(n-butyl)thiophosphoric triamide (NBPT) usinghigh-performance liquid chromatography(HPLC)


CII/37

BS EN ISO 21535:2007Non-active surgical implants. Joint replacementimplants. Specific requirements for hip-jointreplacement implants


CH/150/4

BS EN 13958:2008Aluminium and aluminium alloys. Cold drawn,round, coiled tube for general applications.Specification


NFE/35

BS EN 14317:—Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliatedvermiculite (EV) products

BS EN 14317-2:2007Specification for the installed products


B/540

BS EN 15004:—Fixed firefighting systems. Gas extinguishingsystems

BS EN 15004-7:2008Physical properties and system design of gasextinguishing systems for IG-01 extinguishant

supersedes BS ISO 14520-12:2005ISBN 978 0 580 59948 4£32.00 members, £64.00 non-members

FSH/18/6

Also available as part of KIT 105.



FSH/18/6




FSH/18/6




FSH/18/6


BS EN 15093:2008Safety of machinery. Safety requirements forhot flat rolling mills


MCE/23


BS ISO 7146:—Plain bearings. Appearance andcharacterization of damage to metallichydrodynamic bearings

BS ISO 7146-1:2008General


MCE/12

BS ISO 7146-2:2008Cavitation erosion and its countermeasures


MCE/12

BS ISO 9276:—Representation of results of particle sizeanalysis

BS ISO 9276-6:2008Descriptive and quantitative representation ofparticle shape and morphology


LBI/37

BS ISO 9588:2007Metallic and other inorganic coatings. Post-coating treatments of iron or steel to reducethe risk of hydrogen embrittlement

supersedes BS ISO 9588:1999ISBN 978 0 580 60513 0£32.00 members, £64.00 non-members

STI/33

BS ISO 10129:2006Plain bearings. Testing of bearing materials.Resistance to corrosion by lubricants understatic conditions


MCE/12

BS ISO 10952:2008Plastics piping systems. Glass-reinforcedthermosetting plastics (GRP) pipes and fittings.Determination of the resistance to chemicalattack for the inside of a section in deflectedcondition


PRI/88/2

BS ISO 11500:2008Hydraulic fluid power. Determination of theparticulate contamination level of a liquidsample by automatic particle counting using thelight-extinction principle

supersedes BS ISO 11500:1997ISBN 978 0 580 55546 6£65.00 members, £130.00 non-members

MCE/18/-/6

BS IMPLEMENTATIONS

BS Implementations comprise the ISO orIEC text without any national deviationand with front and back cover indicatingthe UK committee responsible.No other information will normally beadded.

Note: The date referenced in theidentifier is the date of the internationalstandard.

BS ISO 124:2008Latex, rubber. Determination of total solidscontent

supersedes BS 6057-3.2:1997ISBN 978 0 580 63390 4£40.00 members, £80.00 non-members

PRI/50

BS ISO 1170:2008Coal and coke. Calculation of analyses todifferent bases


PTI/16

BS ISO 4126:—Safety devices for protection against excessivepressure

BS ISO 4126-9:2008Application and installation of safety devicesexcluding stand-alone bursting disc safetydevices


PVE/12

BS ISO 4411:2008Hydraulic fluid power. Valves. Determination ofpressure differential/flow characteristics


MCE/18/-/5

BS ISO 5667:—Water quality. Sampling

BS ISO 5667-17:2008Guidance on sampling of bulk suspended solids


EH/3/6

BS ISO 6535:2008Portable chain-saws. Chain brake performance

supersedes BS 6916-5:1988ISBN 978 0 580 58472 5£32.00 members, £64.00 non-members

AGE/29

BS EN 61300:—Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures

BS EN 61300-2-15:2008Tests. Torque strength of coupling mechanism


GEL/86/2

BS EN 61754:—Fibre optic interconnecting devices and passivecomponents. Fibre optic connector interfaces

BS EN 61754-7:2008Type MPO connector family


GEL/86/2

BS EN 61970:—Energy management system applicationprogram interface (EMS-API)

BS EN 61970-453:2008CIM based graphics exchange


PEL/57

BS EN 61996:—Maritime navigation and radiocommunicationequipment and systems. Shipborne voyage datarecorder (VDR)

BS EN 61996-1:2008Voyage data recorder (VDR). Performancerequirements, methods of testing and requiredtest results


EPL/80

BS EN 61996-2:2008Simplified voyage data recorder (S-VDR).Performance requirements, methods of testingand required test results


EPL/80

BS EN 62031:2008LED modules for general lighting. Safetyspecifications


CPL/34/1

BS EN Publications continued...


PD CEN/TR 15728:2008Design and use of inserts for lifting andhandling of precast concrete. Elements


B/524

PD ISO/IEC TR 90005:2008Systems engineering. Guidelines for theapplication of ISO 9001 to system life cycleprocesses


IST/15

DRAFTS FOR DEVELOPMENT

DD CEN ISO/TS 27687:2008Nanotechnologies. Terminology and definitionsfor nano-objects. Nanoparticle, nanofibre andnanoplate


NTI/1

DD IEC/TS 62396:—Process management for avionics. Atmosphericradiation effects

DD IEC/TS 62396-2:2008Guidelines for single event effects testing foravionics systems

supersedes DD IEC/PAS 62396-2:2007ISBN 978 0 580 62024 9£32.00 members, £64.00 non-members

GEL/107

DD IEC/TS 62396-3:2008Optimising system design to accommodate thesingle event effects (SEE) of atmosphericradiation


GEL/107

DD IEC/TS 62396-5:2008Guidelines for assessing thermal neutron fluxesand effects in avionics systems


GEL/107

DD IEC/PAS 62588:2008Marking and labeling of components, PCBs andPCBAs to identify lead(Pb), Pb-free and otherattributes


EPL/501

BS ISO 21009:—Cryogenic vessels. Static vacuum-insulatedvessels

BS ISO 21009-1:2008Design, fabrication, inspection and tests


PVE/18

BS ISO 22493:2008Microbeam analysis. Scanning electronmicroscopy. Vocabulary


CII/9

BS ISO 23380:2008Selection methods for the determination oftrace elements in coal


PTI/16

BS ISO 26322:—Tractors for agriculture and forestry. Safety

BS ISO 26322-1:2008Standard tractors


AGE/6

BS ISO 29470:2008Thermal insulating products for buildingapplications. Determination of the apparentdensity


B/540/8

BS IEC 60870:—Telecontrol equipment and systems

BS IEC 60870-5-6:2006Guidelines for conformance testing for the IEC60870-5 companion standards


PEL/57

PUBLISHED DOCUMENTS

PD ISO/TR 11150:2007Natural gas. Hydrocarbon dew point andhydrocarbon content


PTI/15

BS ISO/IEC 11694:—Identification cards. Optical memory cards.Linear recording method

BS ISO/IEC 11694-3:2008Optical properties and characteristics

supersedes BS ISO/IEC 11694-3:2001ISBN 978 0 580 58565 4£32.00 members, £64.00 non-members

IST/17

BS ISO/IEC 11694-4:2008Logical data structures

supersedes BS ISO/IEC 11694-4:2001ISBN 978 0 580 58564 7£57.00 members, £114.00 non-members

IST/17

BS ISO 12745:2008Copper, lead and zinc ores and concentrates.Precision and bias of mass measurementtechniques


NFE/36

BS ISO 14717:2008Oil of origanum, Spanish type [Coridothymuscapitatus (L.) Rchb.f.]


AW/54

BS ISO 15112:2007Natural gas. Energy determination


PTI/15

BS ISO 15970:2008Natural gas. Measurement of properties.Volumetric properties: density, pressure,temperature and compression factor


PTI/15

BS ISO 16212:2008Cosmetics. Microbiology. Enumeration of yeastand mould


CW/217

BS ISO 18938:2008Imaging materials. Optical discs. Care andhandling for extended storage


CPW/42

BS Implementations continued...


UPDATED BRITISHSTANDARDS

The following standards have beenamended and the amendments havebeen incorporated into an updatedstandard.

NOTE: Updated British Standardsmust be reordered as theamendments are not availableseparately.

BS 4211:2005+A1:2008Specification for permanently fixed ladders

AMENDMENT 1£57.00 members, £114.00 non-members

B/208

SPECIAL ANNOUNCEMENTS

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

BS 598:—Sampling and examination of bituminousmixtures for roads and other paved areas

BS 598-110:1998Methods of test for the determination ofwheel-tracking rate and depth

This standard was withdrawn in error and hasnow been re-instated as the relevantBSI committee reported that there are still usersof this standard.Contact: Bernard WilliamsEmail: [email protected]

B/510/1

BIP 2181:2008Guide to PAS 2050. How to assess the carbonfootprint of goods and services


AMENDMENTS TO BRITISHSTANDARDS

Most amendments are not issuedseparately. Those that make significantchanges to a standard are incorporatedinto the standard which is re-issued as anew edition (see ’Updated BritishStandards’). Amendments which makesmaller changes or corrections areavailable on request, free of charge topast purchasers of the standard. Allamendments to date of despatch areincluded within any main publicationwhen ordered for the first time.

The following amendments to BritishStandards were made available lastmonth.

BS EN 1916:2002Concrete pipes and fittings, unreinforced, steelfibre and reinforced

CORRIGENDUM 1

B/505

BS EN 1917:2002Concrete manholes and inspection chambers,unreinforced, steel fibre and reinforced

CORRIGENDUM 3

B/505

Also incorporates Corrigenda 1 & 2.

BS EN ISO 10081:—Classification of dense shaped refractoryproducts

BS EN ISO 10081-3:2005Basic products containing from 7% to 50%residual carbon

CORRIGENDUM 2

RPI/1

Also incorporates Corrigendum 1.

BS EN 13959:2004Anti-pollution check valves. DN 6 to DN 250inclusive Family E, type A, B, C, and D

CORRIGENDUM 1

B/504

BS EN 14451:2005Devices to prevent pollution by backflow ofpotable water. In-line anti-vacuum valves DN 8to DN 80. Family D, type A

CORRIGENDUM 1

B/504

PUBLICLY AVAILABLESPECIFICATIONS

Publicly Available Specifications (formerlyProduct Assessment Specifications) areissued to provide an interim documentwhere there is a market need but wherea full British or European Standard hasyet to be published.

PAS 67:2008Laboratory tests to determine the heating andelectrical performance of heat-led micro-cogeneration packages primarily intended forheating dwellings


PAS 220:2008Prerequisite programmes on food safety forfood manufacturing


SPECIALIST BOOKS FROMBSI

BIP 0026:2008ISO/IEC 27001. Complete ISMS DocumentationToolkit

supersedes BIP 0026:2006£529.00 members, £529.00 non-membersVAT is applicable to this item.

BIP 0096:2007ITIL version 3. Official introduction to the ITILservice lifecycle

no current standard is supersededISBN 978 0113 31061 6£30.00 members, £30.00 non-members

BIP 2034:2008Disaster and emergency management systems


BIP 2082:2008Electrician’s Guide to the Building RegulationsPart P. 2nd Edition

supersedes BIP 2082:2005ISBN 978 0 86341 862 4£20.00 members, £20.00 non-members

BIP 2139:2007Principles and practices of business continuity.Tools and techniques

no current standard is supersededISBN 1 931332 39 8£55.00 members, £55.00 non-members


Help Us to Help

You!

Always quote your Customer Number

Don’t know your number?

Contact Customer Services

020 8996 9001

who will be happy to check it for you

BS EN ISO 4026:2003Hexagon socket set screws with flat point

FME/9/3

BS EN ISO 4027:2003Hexagon socket set screws with cone point

FME/9/3

BS EN ISO 4028:2003Hexagon socket set screws with dog point

FME/9/3

BS EN ISO 4029:2003Hexagon socket set screws with cup point

FME/9/3

BS EN ISO 7048:1999Cross recessed cheese head screws

FME/9/3

BS EN ISO 10664:2005Hexalobular internal driving feature for boltsand screws

FME/9/2

BS EN 12223:2000Non-destructive testing. Ultrasonic examination.Specification for calibration block No.1

WEE/46

BS EN 12421:1998Magnesium and magnesium alloys. Unalloyedmagnesium

NFE/35

BS EN 12543:—Non-destructive testing. Characteristics of focalspots in industrial X-ray systems for use in non-destructive testing

BS EN 12543-1:1999Scanning method

WEE/46

BS EN 12543-3:1999Slit camera radiographic method

WEE/46

BS EN 12543-4:1999Edge method

WEE/46

BS EN 12543-5:1999Measurement of the effective focal spot size ofmini and micro focus X-ray tubes

WEE/46

BS EN 12544:—Non-destructive testing. Measurement andevaluation of the X-ray tube voltage

BS EN 12544-1:1999Voltage divider method

WEE/46

BS EN 12544-2:2000Constancy check by the thick filter method

WEE/46

BS EN 462-4:1995Experimental evaluation of image quality valuesand image quality tables

WEE/46

BS EN 583:—Non-destructive testing. Ultrasonic examination

BS EN 583-1:1999General principles

WEE/46

BS EN 583-5:2001Characterization and sizing of discontinuities

WEE/46

BS EN 1330:—Non-destructive testing. Terminology

BS EN 1330-1:1998List of general terms

WEE/46

BS EN 1330-2:1998Terms common to the non-destructive testingmethods

WEE/46

BS EN 1330-8:1998Terms used in leak tightness testing

WEE/46

BS EN 1330-10:2003Terms used in visual testing

WEE/46

BS EN 1518:1998Non-destructive testing. Leak testing.Characterization of mass spectrometer leakdetectors

WEE/46

BS EN 1593:1999Non-destructive testing. Leak testing. Bubbleemission techniques

WEE/46

BS EN 1779:1999Non-destructive testing. Leak testing. Criteriafor method and technique selection

WEE/46

BS EN ISO 2342:2003Slotted headless screws with shank

FME/9/1

BS EN ISO 3452:—Non-destructive testing. Penetrant testing

BS EN ISO 3452-3:1999Reference test blocks

WEE/46

BS EN ISO 3452-4:1999Equipment

WEE/46

BRITISH STANDARDSREVIEWED ANDCONFIRMED

It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.

Confirmation indicates the continuingcurrency of a standard.

Where any standard in this list has beenamended since publication, confirmationincludes all amendments published todate. Reference to a particularamendment indicates that it is publishedconcurrently with the confirmation.

BS 7288:1990Specification for socket outlets incorporatingresidual current devices (S.R.C.D.s)

PEL/23

BS 7445:—Description and measurement of environmentalnoise

BS 7445-1:2003Guide to quantities and procedures

EH/1/3

BS 8100:—Lattice towers and masts

BS 8100-2:1986Guide to the background and use of Part 1’Code of practice for loading’

B/525/32

BS 8100-3:1999Code of practice for strength assessment ofmembers of lattice towers and masts

B/525/32

BS 8100-4:1995Code of practice for loading of guyed masts

B/525/32

BS EN 444:1994Non-destructive testing. General principles forradiographic examination of metallic materialsby X- and gamma-rays

WEE/46

BS EN 462:—Non-destructive testing. Image quality ofradiographs

BS EN 462-1:1994Image quality indicators (wire type).Determination of image quality value

WEE/46

BS EN 462-2:1994Image quality indicators (step/hole type).Determination of image quality value

WEE/46

British Standards Reviewed and Confirmed


BRITISH STANDARDSPROPOSED FORDECLARATION OFOBSOLESCENCE

Declaration of obsolescence indicates thatthe standard is not recommended for usein new equipment, but needs to beretained for the servicing of existingequipment that is expected to have along working life.

A note of any objections to the proposalsbelow should be sent to Debbie Stead,Head of Committee Service Centre –Operations, BSI Head Office, 389 ChiswickHigh Road, London W4 4AL or via emailto [email protected] 31 January, 2009.

BS 7083:1996Guide to the accommodation and operatingenvironment for information technology (IT)equipment

ICT/-

This standard has been proposed for obsolescenceas the document needs to be revised in light ofprogression in the area relating to the environmentsfor information technology equipment

BRITISH STANDARDSDECLARED OBSOLESCENT

Declaration of obsolescence indicates thatthe standard is not recommended for usein new equipment but needs to beretained for the servicing of existingequipment that is expected to have along working life.

BS 697:1986Specification for rubber gloves for electricalpurposes

PEL/78

This standard has been declared obsolescent as it isno longer relevant. It is superseded byBS EN 60903:1993

BS 5655:—Lifts and service lifts

BS 5655-10:1986Specification for the testing and inspection ofelectric and hydraulic lifts

MHE/4

This standard has been declared obsolescent as it issuperseded by BS 8486-1:2007 and BS 8486-2:2007, which has replaced BS 5655-10.1.1:1995and BS 5655-10.2.1:1995

BS 6088:1981Specification for solid glass beads for use withroad marking compounds and for otherindustrial uses

B/510

This standard has been re-declared as obsolescentfor a further period as it is no longer relevant

DD CEN/TS 15053:2005Non-destructive testing. Recommendations fordiscontinuities-types in test specimens forexamination

WEE/46

BS EN ISO 15065:2005Countersinks for countersunk head screws withhead configuration in accordance with ISO 7721

FME/9/3

BS EN ISO 16047:2005Fasteners. Torque/clamp force testing

FME/9/1

DD CEN ISO/TS 21432:2005Non-destructive testing. Standard test methodfor determining residual stresses by neutrondiffraction

WEE/46

BS EN ISO 21670:2003Hexagon weld nuts with flange

FME/9

BS EN 25580:1992Specification for minimum requirements forindustrial radiographic illuminators for non-destructive testing

WEE/46

BS ISO 461:—Aircraft. Connectors for ground electricalsupplies

BS ISO 461-1:2003Design, performance and test requirements

ACE/6

BS ISO 14595:2003Microbeam analysis. Electron probemicroanalysis. Guidelines for the specification ofcertified reference materials (CRMs)

CII/9

BS ISO 17470:2004Microbeam analysis. Electron probemicroanalysis. Guidelines for qualitative pointanalysis by wavelength dispersive X-rayspectrometry

CII/9

BS ISO 18114:2003Surface chemical analysis. Secondary-ion massspectrometry. Determination of relativesensitivity factors from ion-implanted referencematerials

CII/60

BS EN 12544-3:1999Spectrometric method

WEE/46

BS EN 12679:2000Non-destructive testing. Determination of thesize of industrial radiographic sources.Radiographic method

WEE/46

BS EN 13068:—Non-destructive testing. Radioscopic testing

BS EN 13068-1:2000Quantitative measurement of imagingproperties

WEE/46

BS EN 13068-2:2000Check of long term stability of imaging devices

WEE/46

BS EN 13068-3:2001General principles of radioscopic testing ofmetallic materials by X- and gamma rays

WEE/46

BS EN 13925:—Non-destructive testing. X-ray diffraction frompolycrystalline and amorphous materials

BS EN 13925-1:2003General principles

WEE/46

BS EN 13925-2:2003Procedures

WEE/46

BS EN 13927:2003Non-destructive testing. Visual testing.Equipment

WEE/46

BS EN 14096:—Non-destructive testing. Qualification ofradiographic film digitisation systems

BS EN 14096-1:2003Definitions, quantitative measurements ofimage quality parameters, standard referencefilm and qualitative control

WEE/46

BS EN 14096-2:2003Minimum requirements

WEE/46

BS EN 14218:2003Hexagon nuts with flange. Fine pitch thread

FME/9

BS EN 14219:2003Hexagon bolts with flange with metric finepitch thread. Small series

FME/9/3


BS 598-107:2004Method of test for the determination of thecomposition of design surface course rolledasphalt

B/510/1

This standard has been withdrawn as it is no longerused or required in the UK

BS 1583:1986Specification for one-mark pipettes

LBI/36

Superseded by BS EN ISO 648:2008

DD 213:1993Method for determination of the indirecttensile stiffness modulus of bituminous mixtures

B/510


BS 6057:—Rubber latices

BS 6057-3.2:1997Methods of test. Determination of total solidscontent of rubber latices

PRI/50

Superseded by BS ISO 124:2008

BS 6282:—Devices with moving parts for the prevention ofcontamination of water by backflow

BS 6282-1:1982Specification for check valves of nominal size upto and including DN 54

B/504

Superseded by BS EN 13959:2004

BS 6282-2:1982Specification for terminal anti-vacuum valves ofnominal size up to and including DN 54

B/504


BS 6282-4:1982Specification for combined check and anti-vacuum valves of nominal size up to andincluding DN 42

B/504


BS 6902:—Cardiac pacemakers

BS 6902-1:1990Specification for implantable cardiacpacemakers

CH/150/6

Superseded by BS EN 45502-2-1:2003 andBS EN 45502-2-2:2008

BS 6902-1:Supplement No. 1:1996Specification for implantable cardiacpacemakers. Electromagnetic compatibility

CH/150/6

Superseded by BS EN 45502-2-1:2003 andBS EN 45502-2-2:2008

BRITISH STANDARDSPROPOSED FORWITHDRAWAL

A note of any objections to thesewithdrawals should be sent to DebbieStead, Head of Committee Service Centre– Operations, BSI Head Office, 389Chiswick High Road, London W4 4AL orvia email [email protected] by31 January, 2009.

Where any standard in this list has beenamended since publication, a proposal towithdraw also includes all amendmentspublished to date.

BS EN ISO 8502:—Preparation of steel substrates beforeapplication of paints and related products. Testsfor the assessment of surface cleanliness

BS EN ISO 8502-10:2004Field method for the titrimetric determinationof water-soluble chloride

STI/21

This standard has been proposed for withdrawal asthe corresponding CEN and ISO standards have beenwithdrawn

BRITISH STANDARDSWITHDRAWN

If any standard in this list has beenamended since publication, allamendments published to date are alsowithdrawn

BS 598:—Sampling and examination of bituminousmixtures for roads and other paved areas

BS 598-100:2004Methods for sampling for analysis

B/510/1


BS 598-101:2004Methods for preparatory treatments of samplesfor analysis

B/510/1


BS 598-102:2003Analytical test methods

B/510/1


BS 598-104:2005Methods of test for the determination ofdensity and compaction

B/510/1


BS 8110:—Structural use of concrete

BS 8110-1:1997Code of practice for design and construction

B/525/2

All relevant Eurocodes and their National Annexesfor design of concrete buildings will be published in2008. The NA to BS EN 1991-1-4 was published inSeptember 2008. The relevant committee, B/525/2consider that there is no need to continue tosupport BS 8110 now this is published as DCLGhave indicated it is acceptable to use EC2 for designaccording to the Building Regulations and will beadvising Local Authorities of this in the near future

BS 8110-2:1985Code of practice for special circumstances

B/525/2


BS 8110-3:1985Design charts for singly reinforced beams,doubly reinforced beams and rectangularcolumns

B/525/2


BS EN 60601:—Medical electrical equipment

BS EN 60601-1-3:1995(BS 5724-1.3:1995)General requirements for safety. Collateralstandard. General requirements for radiationprotection in diagnostic X-ray equipment

CH/62/2

This standard has been declared obsolescent as it issuperseded by BS EN 60601-1-3:2008 and will bewithdrawn on publication of the revisedBS EN 60601-2 series

BS HC 404:1977Specification for chromium-molybdenum alloycast iron ring pots (suitable for centrifugallycast and sand cast sealing rings, piston ringsand cylinder liners)

ACE/61/-/15

This standard has been re-declared as obsolescentfor a further period as it is no longer relevant

British Standards Declared Obsolescent continued...


BS 4361:—Woodworking machines

BS 4361-0:1990(ISO 7984:1988)Classification of woodworking machines andauxiliary machines used for woodworking

MTE/23

BS 4361-20:1990(ISO 7983:1988)Specification for single blade circular sawingmachines with travelling table

MTE/23

BS 4361-22:1990(ISO 7988:1988)Specification for double-end tenoning machines

MTE/23

BS 4361-23:1990(ISO 9264:1988)Nomenclature for narrow belt sandingmachines with sliding table or frame

MTE/23

BS 4361-24:1990(ISO 9265:1988)Nomenclature for multi-spindle boringmachines

MTE/23

BS 4361-25:1990(ISO 9266:1988)Nomenclature for universal tool and cuttersharpeners

MTE/23

BS 4361-26:1990(ISO 9267:1988)Nomenclature for bandsaw blade sharpeningmachines

MTE/23

BS 4540:—Sampling of spices and condiments

BS 4540-2:1982(ISO 2825:1981)Method for preparation of a ground sample foranalysis

AW/7

BS 4585:—Methods of test for spices and condiments

BS 4585-16:1990(ISO 7541:1989)Determination of total natural colouring mattercontent of ground (powdered) paprika

AW/7

BS EN 61810-5:1999Insulation coordination

EPL/94

Superseded by BS EN 61810-1:2004

BS ISO 14520:—Gaseous fire-extinguishing systems. Physicalproperties and system design

BS ISO 14520-12:2005IG-01 extinguishant

FSH/18/6



FSH/18/6



FSH/18/6



FSH/18/6


BRITISH STANDARDS UNDERREVIEW

The following British Standardsimplement International and/or EuropeanStandards which are currently underreview to see if they should be confirmed,revised or withdrawn.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL or via email [email protected] by31 January, 2009, in order to beconsidered by the relevantUK Committee.

BS 3483:—Methods for testing pigments for paints

BS 3483-A1:1983(ISO 787-1:1982)Comparison of colour

STI/1

BS 3483-C3:1982(ISO 787-4:1981)Determination of acidity or alkalinity of theaqueous extract

STI/1

BS 6916:—Chain saws

BS 6916-5:1988Methods of evaluating chain brakeperformance

AGE/29

Superseded by BS ISO 6535:2008

BS 7412:2002Plastics windows made from unplasticizedpolyvinyl chloride (PVC-U) extruded hollowprofiles. Specification

B/538/1

Superseded by BS 7412:2007

BS EN 12475:—Classification of dense shaped refractoryproducts

BS EN 12475-3:1998Basic products containing from 7% to 30%residual carbon

RPI/1

Superseded by BS EN ISO 10081-3:2005

BS EN 12563:1999Non-active surgical implants. Joint replacementimplants. Specific requirements for hip jointreplacement implants

CH/150/4

Superseded by BS EN ISO 21535:2007

BS EN 60491:1997Safety requirements for electronic flashapparatus for photographic purposes

EPL/108


BS EN 60730:—Specification for automatic electrical controlsfor household and similar use

BS EN 60730-2:—Particular requirements

BS EN 60730-2-5:1995Automatic electrical burner control systems

CPL/72

Superseded by BS EN 60730-2-5:2002

BS EN 60730-2-8:1995Electrically operated water valves, includingmechanical requirements

CPL/72


BS EN 60730-2-9:1995Temperature sensing controls

CPL/72


BS EN 61810:—Electromechanical non-specified time all-or-nothing relays

BS EN 61810-1:1999General requirements

EPL/94



BS EN ISO 3175-3:2003Procedure for testing performance whencleaning and finishing using hydrocarbonsolvent

TCI/82

BS EN ISO 3175-4:2003Procedure for testing performance whencleaning and finishing using simulatedwetcleaning

TCI/82

BS EN ISO 3262:—Extenders for paints. Specifications andmethods of test

BS EN ISO 3262-8:2000Natural clay

STI/1

BS EN ISO 3953:1995Metallic powders. Determination of tap density

ISE/65

BS EN ISO 4126:—Safety devices for protection against excessivepressure

BS EN ISO 4126-6:2003Application, selection and installation ofbursting disc safety devices

PVE/12

BS EN ISO 4618:2006Paints and varnishes. Terms and definitions

STI/11

BS EN ISO 4684:2005Leather. Chemical tests. Determination ofvolatile matter

TCI/69

BS EN ISO 4934:2003Steel and iron. Determination of sulfur content.Gravimetric method

ISE/18

BS EN ISO 10081:—Classification of dense shaped refractoryproducts

BS EN ISO 10081-1:2005Alumina-silica

RPI/1

BS EN ISO 10081-2:2005Basic products containing less than 7% residualcarbon

RPI/1

BS EN ISO 10081-3:2005Basic products containing from 7% to 50%residual carbon

RPI/1

BS EN ISO 10806:2003Pipework. Fittings for corrugated metal hoses

PSE/12

BS EN ISO 787-10:1995Determination of density. Pyknometer method

STI/1

BS EN ISO 787-11:1995Determination of tamped volume and apparentdensity after tamping

STI/1

BS EN ISO 787-18:1995Determination of residue on sieve. Mechanicalflushing procedure

STI/1

BS EN ISO 787-19:1995(BS 3483-C9:1995)Determination of water-soluble nitrates(Salicylic acid method)

STI/1

BS EN ISO 787-25:2006(ISO 787-25:1993)Comparison of the colour, in full-shade systems,of white, black and coloured pigments.Colorimetric method

STI/1

BS EN 975:—Sawn timber. Appearance grading ofhardwoods

BS EN 975-2:2004Poplars

B/543

BS EN 1116:2004Kitchen furniture. Co-ordinating sizes forkitchen furniture and kitchen appliances

FW/0

BS EN ISO 1248:2008Iron oxide pigments. Specifications andmethods of test

STI/1

BS EN 1957:2000Domestic furniture. Beds and mattresses. Testmethods for the determination of functionalcharacteristics

FW/0/2

BS EN ISO 2360:2003Non-conductive coatings on non-magneticelectrically conductive basis materials.Measurement of coating thickness. Amplitude-sensitive eddy current method

STI/33

BS EN ISO 3175:—Textiles. Dry cleaning and finishing

BS EN ISO 3175-1:1998Method for assessing the cleanability of textilesand garments

TCI/82

BS EN ISO 3175-2:1998Procedures for tetrachloroethene

TCI/82

BS 5072:—Methods of test for sodium fluoride forindustrial use

BS 5072-8:1980(ISO 3566:1976)Determination of chlorides content

CII/24

BS 6607:—Tool shanks with 7/24 taper for automatic toolchangers

BS 6607-4:1994(ISO 9524:1993)Specification for functional dimensions of frontfaces of spindle holders for machine centres

MTE/5

BS 7020:—Analysis of iron ores

BS 7020-8.1:1988(ISO 6830:1986)Methods for the determination of aluminiumcontent. Titrimetric method

ISE/58

BS 7745:—End mills with brazed helical hardmetal tips

BS 7745-1:1994(ISO 10145-1:1993)Dimensions of end mills with parallel shank

MTE/18

BS 7745-2:1994(ISO 10145-2:1993)Dimensions of end mills with taper shank

MTE/18

BS EN ISO 105:—Textiles. Tests for colour fastness

BS EN ISO 105-G02:1997Colour fastness to burnt-gas fumes

TCI/81

BS EN ISO 150:2007Raw, refined and boiled linseed oil for paintsand varnishes. Specifications and methods oftest

STI/3

BS EN ISO 787:—General methods of test for pigments andextenders

BS EN ISO 787-2:1995Determination of matter volatile at 105°C

STI/1

BS EN ISO 787-9:1995Determination of pH value of aqueoussuspension

STI/1

British Standards Under Review continued...


BS EN ISO 18104:2003Health informatics. Integration of a referenceterminology model for nursing

IST/35

BS EN ISO 18756:2005Fine ceramics (advanced ceramics, advancedtechnical ceramics). Determination of fracturetoughness of monolithic ceramics at roomtemperature by the surface crack in flexure(SCF) method

RPI/13

BS EN ISO 18757:2005Fine ceramics (advanced ceramics, advancedtechnical ceramics). Determination of specificsurface area of ceramic powders by gasadsorption using the BET method

RPI/13

BS EN ISO 19112:2005Geographic information. Spatial referencing bygeographic identifiers

IST/36

BS EN ISO 19133:2007Geographic information. Location basedservices. Tracking and navigation

IST/36

BS EN ISO 19135:2007Geographic information. Procedures for itemregistration

IST/36

BS EN ISO 19954:2003Footwear. Test methods for whole shoe.Washability in a domestic washing machine

TCI/69

BS EN ISO 20783:—Petroleum and related products. Determinationof emulsion stability of fire-resistant fluids

BS EN ISO 20783-1:2003Fluids in category HFAE

MCE/18/-/16

BS EN ISO 20783-2:2003Fluids in category HFB

MCE/18/-/16

BS EN ISO 21178:2006Light conveyor belts. Determination of electricalresistances

PRI/67

BS EN ISO 21179:2006Light conveyor belts. Determination of theelectrostatic field generated by a running lightconveyor belt

PRI/67

BS EN ISO 21180:2006Light conveyor belts. Determination of themaximum tensile strength

PRI/67

BS EN ISO 15732:2005Fine ceramics (advanced ceramics, advancedtechnical ceramics). Test method for fracturetoughness of monolithic ceramics at roomtemperature by single edge precracked beam(SEPB) method

RPI/13

BS EN ISO 15874:—Plastics piping systems for hot and cold waterinstallations. Polypropylene (PP)

BS EN ISO 15874-1:2003General

PRI/88/2

BS EN ISO 15874-2:2003Pipes

PRI/88/2

BS EN ISO 15874-5:2003Fitness for purpose of the system

PRI/88/2

BS EN ISO 15875:—Plastics piping systems for hot and cold waterinstallations. Crosslinked polyethylene (PE-X)


PRI/88/2


PRI/88/2

BS EN ISO 15875-3:2003Fittings

PRI/88/2


PRI/88/2

BS EN ISO 15876:—Plastics piping systems for hot and cold waterinstallations. Polybutylene (PB)


PRI/88/2


PRI/88/2

BS EN ISO 15876-3:2003Fittings

PRI/88/2


PRI/88/2

BS EN ISO 17834:2003Thermal spraying. Coatings for protectionagainst corrosion and oxidation at elevatedtemperatures

STI/40

BS EN ISO 10931:2005Plastics piping systems for industrialapplications. Poly(vinylidene fluoride) (PVDF).Specifications for components and the system

PRI/88/2

BS EN 13721:2004Furniture. Assessment of the surface reflectance

FW/0/1

BS EN 13722:2004Furniture. Assessment of the surface gloss

FW/0/1

BS EN 13802:2004Railway applications. Suspension components.Hydraulic dampers

RAE/3/-/4

BS EN 13990:2004Wood flooring. Solid softwood floor boards

B/543

BS EN 14073:—Office furniture. Storage furniture

BS EN 14073-2:2004Safety requirements

FW/0

BS EN 14073-3:2004Test methods for the determination of stabilityand strength of the structure

FW/0

BS EN 14074:2004Office furniture. Tables and desks and storagefurniture. Test methods for the determinationof strength and durability of moving parts

FW/0

BS EN 14076:2004Timber stairs. Terminology

B/543

BS EN ISO 14419:1999Textiles. Oil repellency. Hydrocarbon resistancetest

TCI/82

DD ENV 14464:2002Sawn timber. Method for assessment of case-hardening

B/543

BS EN ISO 14935:1999Petroleum and related products. Determinationof wick flame persistence of fire-resistant fluids

MCE/18/-/16

BS EN ISO 15236:—Steel cord conveyor belts

BS EN ISO 15236-1:2005Design, dimensions and mechanicalrequirements for conveyor belts for general use

PRI/67


BS ISO 4010:1998Diesel engines. Calibrating nozzle, delay pintletype

MCE/22

BS ISO 5389:2005Turbocompressors. Performance test code

MCE/8

BS ISO 5391:2003Pneumatic tools and machines. Vocabulary

MCE/8

BS ISO 6264:1998Hydraulic fluid power. Pressure-relief valves.Mounting surfaces

MCE/18

BS ISO 6621:—Internal combustion engines. Piston rings

BS ISO 6621-2:2003Inspection measuring principles

MCE/14/-/10

BS ISO 6621-4:2003General specifications

MCE/14/-/10

BS ISO 6621-5:2005Quality requirements

MCE/14/-/10


BS ISO 6622-1:2003Rectangular rings made of cast iron

MCE/14/-/10

BS ISO 6622-2:2003Rectangular rings made of steel

MCE/14/-/10


BS ISO 6624-2:2003Half keystone rings made of cast iron

MCE/14/-/10

BS ISO 6624-4:2003Half keystone rings made of steel

MCE/14/-/10

BS ISO 6743:—Lubricants, industrial oils and related products(class L). Classification

BS ISO 6743-3:2003Family D (Compressors)

PTI/7

BS ISO 763:2003Fruit and vegetable products. Determination ofash insoluble in hydrochloric acid

AW/100

BS ISO 855:2003Oil of lemon [Citrus limon (L.) Burm. f.],obtained by expression

AW/54

BS ISO 1122:—Vocabulary of gear terms

BS ISO 1122-1:1998Definitions related to geometry

MCE/5

BS ISO 1505:1993Textile machinery. Widths relating to dyeingand finishing machines. Definitions and rangeof nominal widths

TCI/33

BS ISO 1919:1998Road vehicles. M14 x 1,25 spark plugs with flatseating and their cylinder head housings

MCE/9

BS ISO 2173:2003Fruit and vegetable products. Determination ofsoluble solids. Refractometric method

AW/100

BS ISO 2240:2003Photography. Colour reversal camera films.Determination of ISO speed

CPW/42

BS ISO 2344:1998Road vehicles. M14 x 1,25 spark plugs withconical seating and their cylinder head housings

MCE/9

BS ISO 2385:1993Corkwood in planks, virgin cork, cleanings, corkpieces, corkwood refuse and corkwaste.Sampling to determine moisture content

PRI/81

BS ISO 2534:1998Road vehicles. Engine test code. Gross power

MCE/22

BS ISO 2704:1998Road vehicles. M10 x 1 spark plugs with flatseating and their cylinder head housings

MCE/9

BS ISO 3519:2005Oil of lime distilled, Mexican type [Citrusaurantifolia (Christm.) Swingle]

AW/54

BS ISO 3761:2005Oil of rosewood, Brazilian type [Anibarosaeodora Ducke var. amazonica Ducke orAniba parviflora (Meissner) Mez]

AW/54

BS EN ISO 21181:2006Light conveyor belts. Determination of therelaxed elastic modulus

PRI/67

BS EN ISO 21182:2006Light conveyor belts. Determination of thecoefficient of friction

PRI/67

BS EN ISO 21183:—Light conveyor belts

BS EN ISO 21183-1:2006Principal characteristics and applications

PRI/67

BS EN ISO 21183-2:2006List of equivalent terms

PRI/67

BS EN ISO 23953:—Refrigerated display cabinets

BS EN ISO 23953-1:2005Vocabulary

RHE/19

BS EN ISO 23953-2:2005Classification, requirements and test conditions

RHE/19

BS ISO 5:—Photography. Density measurements

BS ISO 5-4:1995Geometric conditions for reflection density

CPW/42

BS ISO 76:2006Rolling bearings. Static load ratings

MCE/7

BS ISO 113:1999Rolling bearings. Plummer block housings.Boundary dimensions

MCE/7

BS ISO 155:1998Belt drives. Pulleys. Limiting values foradjustment of centres

MCE/10

BS ISO 199:2005Rolling bearings. Thrust bearings. Tolerances

MCE/7

BS ISO 254:1998Belt drives. Pulleys. Quality, finish and balance

MCE/10

BS ISO 762:2003Fruit and vegetable products. Determination ofmineral impurities content

AW/100



BS ISO 13357:—Petroleum products. Determination of thefilterability of lubricating oils

BS ISO 13357-2:2005Procedure for dry oils

MCE/18/-/16

BS ISO 13556:1998Road vehicles. Localization of exhaust systemleaks and equipment specifications

MCE/22

BS ISO 14469:—Road vehicles. Compressed natural gas (CNG)refuelling connector

BS ISO 14469-3:200625 MPa (250 bar) connector

GSE/40

BS ISO 14681:1998Diesel engines. Fuel injection pump testing.Calibrating fuel injectors

MCE/22

BS ISO 14794:2003Heavy commercial vehicles and buses. Brakingin a turn. Open-loop test methods

AUE/15

BS ISO 15237:2003Solid mineral fuels. Determination of totalmercury content of coal

PTI/16

BS ISO 15238:2003Solid mineral fuels. Determination of totalcadmium content of coal

PTI/16

BS ISO 15312:2003Rolling bearings. Thermal speed rating.Calculation and coefficients

MCE/7

BS ISO 16067:—Photography. Spatial resolution measurementsfor electronic scanners for photographic images

BS ISO 16067-1:2003Scanners for reflective media

CPW/42

BS ISO 16860:2005Hydraulic fluid power. Filters. Test method fordifferential pressure devices

MCE/18/-/6

BS ISO 16915:2003Tools for moulding. Sprue pullers

MTE/12

BS ISO 17080:2005Manually portable agricultural and forestrymachines and powered lawn and gardenequipment. Design principles for single-panelproduct safety labels

AGE/6

BS ISO 9848:2003Photography. Source document microfilms.Determination of ISO speed and ISO averagegradient

CPW/42

BS ISO 9947:2005Textile machinery and accessories. Two-for-onetwisters. Vocabulary

TCI/33

BS ISO 9981:1998Belt drives. Pulleys and V-ribbed belts for theautomotive industry. PK profile: Dimensions

MCE/10

BS ISO 9982:1998Belt drives. Pulleys and V-ribbed belts forindustrial applications. PH, PJ, PK, PL and PMprofiles. Dimensions

MCE/10

BS ISO 10054:1998Internal combustion compression-ignitionengines. Measurement apparatus for smokefrom engines operating under steady-stateconditions. Filter type smokemeter

MCE/22

BS ISO 10059:—Dense shaped refractory materials.Determination of cold compressive strength

BS ISO 10059-2:2003Test with packing

RPI/1

BS ISO 10458:1993Textile machinery. Square bars for windingdevices relating to dyeing and finishingmachines. Dimensions

TCI/33

BS ISO 11901:—Tools for pressing. Gas springs

BS ISO 11901-1:2003General specifications

MTE/12

BS ISO 12140:1998Agricultural machinery. Agricultural trailers andtrailed equipment. Drawbar jacks

AGE/6

BS ISO 13203:2006Chains, sprockets and accessories. List ofequivalent terms

MCE/1

BS ISO/IEC 13249:—Information technology. Database languages.SQL multimedia and application packages

BS ISO/IEC 13249-2:2003Full-text

IST/40

BS ISO/IEC 13249-5:2003Still image

IST/40

BS ISO 6966:—Aircraft ground equipment. Basic requirements

BS ISO 6966-1:2005General design requirements

ACE/57

BS ISO 6966-2:2005Safety requirements

ACE/57

BS ISO 6968:2005Aircraft ground equipment. Lower deck loader.Functional requirements

ACE/57

BS ISO 7063:2003Rolling bearings. Needle roller bearing trackrollers. Boundary dimensions and tolerances

MCE/7

BS ISO 7654:1998Road vehicles. Spin-on fuel filters for dieselengines. Mounting and connecting dimensions

MCE/21

BS ISO/IEC 7816:—Identification cards. Integrated circuit(s) cardswith contacts

BS ISO/IEC 7816-1:1998+A1:2003Physical characteristics

IST/17

BS ISO 8007:—Carbonaceous materials used in the productionof aluminium. Sampling plans and samplingfrom individual units

BS ISO 8007-3:2004Sidewall blocks

CII/24

BS ISO 8008:2005Aluminium oxide primarily used for theproduction of aluminium. Determination ofspecific surface area by nitrogen adsorption

CII/24

BS ISO 8404:2003Tools for moulding. Angle pins

MTE/12

BS ISO 8443:1999Rolling bearings. Radial ball bearings withflanged outer ring. Flange dimensions

MCE/7

BS ISO 8899:2003Oil of lemon petitgrain [Citrus limon (L.)Burm.f.]

AW/54

BS ISO 8900:2005Oil of bergamot petitgrain [Citrus bergamia(Risso et Poit.)]

AW/54


BS 2M 52:1989(ISO 6772:1988)Method for impulse testing of hydraulic hose,tubing and fitting assemblies for aerospacefluid systems

ACE/69

BS M 55:1984(ISO 7257:1983)Method for rotary flexure testing of hydraulictubing joints and fittings for aerospace use

ACE/69

BS M 57:1985(ISO 7313:1984)Specification for high temperature convolutedhose assemblies in polytetrafluoroethylene(PTFE) for aerospace applications

ACE/69

BS M 61:1989(ISO 7315:1988)Specification for envelope dimensions of “P”clamps (loop clamps) for fluid systems

ACE/69

BS M 66:1987Specification for dimensions of ’Q’ clamps(centre-mounted clamps) for fluid systems

ACE/69

BS 3SP 89:1983(ISO 1002:1983)Specification for characteristics, boundarydimensions, tolerances and static load ratings ofairframe bearings

MCE/7

BS AU 259:1995(ISO 12667:1993)Specification for components for commercialvehicles and buses. Cross-tooth propeller shaftflanges, type T

AUE/13

NEW WORK STARTED

The reference number of the committeeresponsible for each item of new workstarted is given after each entry.

Where a work item has the temporarydesignation “BS EN XXXX”, it has not yetbeen allocated a standard number by theEuropean standards body.

BS 476:—Fire tests on building materials and structures

BS 476-6:1989/Amendment 1Method of test for fire propagation forproducts

FSH/21/1

BS ISO 20462-3:2005Quality ruler method

CPW/42

BS ISO 20508:2003Fine ceramics (advanced ceramics, advancedtechnical ceramics). Determination of lighttransmittance of ceramic films with transparentsubstrate

RPI/13

BS ISO 21093:2003Oil of dwarf pine (Pinus mugo Turra)

AW/54

BS ISO 21390:2005Oil of wintergreen, China [Gaultheriayunnanensis (Franch.) Rehd.], redistilled

AW/54

BS ISO 22029:2003Standard file format for spectral data exchange

CII/9

BS ISO 22234:2005Cinematography. Relative and absolute soundpressure levels for motion-picture multi-channelsound systems. Measurement methods andlevels applicable to analog photographic filmaudio, digital photographic film audio and D-cinema audio

CPW/36

BS ISO 24347:2005Agricultural vehicles. Mechanical connectionsbetween towed and towing vehicles.Dimensions of ball-type coupling device (80 mm)

AGE/6

BS 2A 296:1995(ISO 7913:1994)Bolts and screws, metric. Tolerances of form andposition

ACE/12

BS A 305:1994(ISO 7961:1994)Bolts. Test methods

ACE/12

BS 4G 173:—Specification for dimensions

BS 4G 173-2:1985(ISO 461-2:1985)Connectors for ground electrical supplies foraircraft

ACE/6

BS 2G 219:1983(ISO 6858:1982)Specification for general requirements forground support electrical supplies for aircraft

ACE/6

BS ISO 17455:2005Plastics piping systems. Multilayer pipes.Determination of the oxygen permeability ofthe barrier pipe

PRI/88/4

BS ISO 17559:2003Hydraulic fluid power. Electrically controlledhydraulic pumps. Test methods to determineperformance characteristics

MCE/18

BS ISO 17584:2005Refrigerant properties

RHE/18

BS ISO 18084:2005Press tools for tablets. Punches and dies

MTE/12

BS ISO 18573:2003Conveyor belts. Test atmospheres andconditioning periods

PRI/67

BS ISO 18653:2003Gears. Evaluation of instruments for themeasurement of individual gears

MCE/5/-/2

BS ISO 18929:2003Imaging materials. Wet-processed silver-gelatintype black-and-white photographic reflectionprints. Specifications for dark storage

CPW/42

BS ISO 19128:2005Geographic information. Web map serverinterface

IST/36

BS ISO 19334:2006Binders for paints and varnishes. Gum rosin.Gas-chromatographic analysis

STI/3

BS ISO 19438:2003Diesel fuel and petrol filters for internalcombustion engines. Filtration efficiency usingparticle counting and contaminant retentioncapacity

MCE/21/6

BS ISO 20203:2005Carbonaceous materials used in the productionof aluminium. Calcined coke. Determination ofcrystallite size of calcined petroleum coke by X-ray diffraction

CII/24

BS ISO 20462:—Photography. Psychophysical experimentalmethods for estimating image quality

BS ISO 20462-1:2005Overview of psychophysical elements

CPW/42

BS ISO 20462-2:2005Triplet comparison method

CPW/42



BS EN 299 (Revision)Oil pressure atomizing nozzles. Determinationof the angle and spray characteristics

will supersede BS EN 299:1999

GSE/27

BS EN 527:—Office furniture. Work tables and desks

BS EN 527-1 (Revision)Dimensions

will supersede BS EN 527-1:2000

FW/0/3

BS EN 794:—Lung ventilators

BS EN 794-3:1999/Amendment 2Particular requirements for emergency andtransport ventilators

CH/121/5

BS EN 795 (Revision)Protection against falls from a height. Anchordevices. Requirements and testing


PH/5

DD CEN/TS 81:—Safety rules for the construction and installationof lifts. Basics and interpretations

DD CEN/TS 81-11Interpretations related to EN 81 family ofstandards

MHE/4

BS EN 973 (Revision)Chemicals used for treatment of water intendedfor human consumption. Sodium chloride forregeneration of ion exchangers


CII/59

PD CEN/TR XXXXTextiles. Cosmetotextiles

TCI/80

BS EN 1060:—Specification for non-invasivesphygmomanometers

BS EN 1060-1:1996/Amendment 2General requirements

CH/205/10

BS EN 1060-2:1996/Amendment 1Supplementary requirements for mechanicalsphygmomanometers

CH/205/10

BS EN 1060-3:1997/Amendment 2Supplementary requirements for electro-mechanical blood pressure measuring systems

CH/205/10

BS 8527Aggregates. Aggregates for unbound andhydraulically bound materials for use in civilengineering works and road construction.Guidance on the use of BS EN 13242

B/502

BS 8528Aggregates. Armourstone. Guidance on the useof BS EN 13383-1

B/502

BS 8551Water quality. Guide to assuring potable waterquality in temporary supply situations

EH/3

BS EN 31 (Revision)Pedestal wash basins. Connecting dimensions


B/503

BS EN 33 (Revision)Pedestal W.C. pans with close-coupled flushingcistern. Connecting dimensions


B/503

BS EN 71:—Safety of toys

BS EN 71-4 (Revision)Experimental sets for chemistry and relatedactivities

will supersede BS EN 71-4:1998+A3:2007

CW/15

BS EN WI 00216061Chemical disinfectants and antiseptics.Chemical-thermal linen disinfection. Testmethod and requirements (phase 2, step 2)

CH/216

BS EN WI CSF05025Weigh-in-motion of road vehicles

PRI/69

BS EN 115:—Safety of escalators and moving walks

BS EN 115-2Rules for the improvement of safety of existingescalators and moving walks

MHE/4

BS EN 131:—Ladders

BS EN 131-3 (Revision)User instructions


B/512

BS EN 285:2006+A1:2008/Amendment 2Sterilization. Steam sterilizers. Large sterilizers

LBI/35

BS 1916:—Limits and fits for engineering

BS 1916-1 (Revision)Limits and tolerances

will supersede BS 1916-1:1953

TDW/4

BS 1916-2 (Revision)Guide to the selection of fits in BS 1916-1


TDW/4

BS 1916-3 (Revision)Recommendations for tolerances, limits and fitsfor large diameters


TDW/4

BS 3655:1981/Amendment 1Recommendations for informative labelling oftextile floor coverings

PRI/3

BS 4311:—Specification for gauge blocks and accessories

BS 4311-2 (Revision)Accessories


TDW/4

BS 4500 (Revision)ISO limits and fits. Guidance

will supersede BS 4500-4:1985 and BS 4500-5:1988

TDW/4

BS 6915:2001/Amendment 1Design and construction of fully supported leadsheet roof and wall coverings. Code of practice

B/542/11

BS 8204:—Screeds, bases and in situ floorings

BS 8204-1:2003/Amendment 1Concrete bases and cement sand levellingscreeds to receive floorings. Code of practice

B/507/6

BS 8204-2:2003/Amendment 1Concrete wearing surfaces. Code of practice

B/507/6

BS 8204-3:2004/Amendment 1Polymer modified cementitious levelling screedsand wearing screeds. Code of practice

B/507/6

BS 8409 (Revision)Soft indoor play areas. Code of practice

will supersede BS 8409:2002

SW/65/5

BS 8526Aggregates. Aggregates for concrete. Guidanceon the use of BS EN 12620

B/502


BS EN 12006:—Non-active surgical implants. Particularrequirements for cardiac and vascular implants

BS EN 12006-2:1998/Amendment 1Vascular prostheses including cardiac valveconduits

CH/150/2

BS EN 12006-3:1999/Amendment 1Endovascular devices

CH/150/2

BS EN 12342:1998/Amendment 1Breathing tubes intended for use withanaesthetic apparatus and ventilators

CH/121/5

BS EN 12470:—Clinical thermometers

BS EN 12470-1:2000/Amendment 1Metallic liquid-in-glass thermometers withmaximum device

LBI/36/3

BS EN 12470-2:2001/Amendment 1Phase change type (dot matrix) thermometers

LBI/36/3

BS EN 12470-3:2000/Amendment 1Performance of compact electricalthermometers (non-predictive and predictive)with maximum device

LBI/36/3

BS EN 12470-4:2001/Amendment 1Performance of electrical thermometers forcontinuous measurement

LBI/36/3

BS EN 12470-5:2003/Amendment 1Performance of infra-red ear thermometers(with maximum device)

LBI/36/3

BS EN 12735:—Copper and copper alloys. Seamless, roundcopper tubes for air conditioning andrefrigeration

BS EN 12735-1 (Revision)Tubes for piping systems


NFE/34/1

BS EN 12735-2 (Revision)Tubes for equipment


NFE/34/1

BS EN 13060:2004/Amendment 1Small steam sterilizers

LBI/35

BS EN 13060:2004/Amendment 2Small steam sterilizers

LBI/35

BS EN 3155-075Contacts, electrical, quadrax, size 8, female,type E, crimp, class R. Product standard

ACE/6

BS EN 3475:—Aerospace series. Cables, electrical, aircraft use.Test methods

BS EN 3475-100 (Revision)General


ACE/6

BS EN 4652:—Aerospace series. Connectors, coaxial,radiofrequency

BS EN 4652-001Technical specification

ACE/6

BS EN 4652-002Specification of performances

ACE/6

PD CEN/TR 4653Aerospace series. Technical specification ofplating of connectors cadmium and hexavalentchromium replacement

ACE/6

BS EN 4673:—Aerospace series. Inserts, UNJ threads, self-locking, self-broaching keys

BS EN 4673-003Technical specification

ACE/12

PD CEN/TR 4676Aerospace series. Aluminium pigmentedcoatings. List of commercial products

ACE/12

BS EN ISO 8359 (Revision)Medical electrical equipment. Oxygenconcentrators for medical use. Safetyrequirements

will supersede BS EN ISO 8359:1997

CH/121/5

BS EN ISO 8835:—Inhalational anaesthesia systems

BS EN ISO 8835-2 (Revision)Anaesthetic breathing systems

will supersede BS EN ISO 8835-2:2007

CH/121

BS EN ISO 9360:—Anaesthetic and respiratory equipment. Heatand moisture exchangers (HMEs) forhumidifying respired gases in humans

BS EN ISO 9360-2 (Revision)HMEs for use with tracheostomized patientshaving minimum tidal volumes of 250 ml


CH/121

BS EN 1276 (Revision)Chemical disinfectants and antiseptics.Quantitative suspension test for the evaluationof bactericidal activity of chemical disinfectantsand antiseptics used in food, industrial,domestic, and institutional areas. Test methodand requirements (phase 2, step 1)


CH/216

BS EN 1282:—Tracheostomy tubes

BS EN 1282-2:1997/Amendment 1Paediatric tubes

CH/121/5

BS EN 1536 (Revision)Execution of special geotechnical work. Boredpiles


B/526

BS EN 1538 (Revision)Execution of special geotechnical works.Diaphragm walls


B/526

BS EN 1656 (Revision)Chemical disinfectants and antiseptics.Quantitative suspension test for the evaluationof bactericidal activity of chemical disinfectantsused in veterinary field. Test method andrequirements (phase 2/step 1)


CH/216

BS EN 1782:1998/Amendment 1Tracheal tubes and connectors

CH/121/5

BS EN 1820:2005/Amendment 1Anaesthetic reservoir bags

CH/121/5

BS EN 3155:—Aerospace series. Electrical contacts used inelements of connection

BS EN 3155-032Contacts, electrical, coaxial, 50 ohms, size 5,male, type D, crimp, class R. Product standard

ACE/6

BS EN 3155-033Contacts, electrical, coaxial, 50 ohms, size 5,female, type D, crimp, class R. Product standard

ACE/6

BS EN 3155-063Contacts, electrical, coaxial, 50 ohms, size 1,male, type D, solder, class R. Product standard

ACE/6

BS EN 3155-064Contacts, electrical, coaxial, 50 ohms, size 1,female, type D, solder, class R. Product standard

ACE/6

New Work Started continued...


BS EN 60601:—Medical electrical equipment

BS EN 60601-1:2006/Amendment 1General requirements for basic safety andessential performance

CH/62/1

BS EN 60601-1-6 (Revision)General requirements for basic safety andessential performance. Collateral standard.Usability

will supersede BS EN 60601-1-6:2007

CH/62/1

BS EN 60601-2-62Particular requirements for basic safety andessential performance of high intensitytherapeutic ultrasound (HITU) system

CH/62/4

BS EN 60728:—Cable networks for television signals, soundsignals and interactive services

BS EN 60728-11 (Revision)Safety


EPL/100

BS EN 60811:—Insulating and sheathing materials of electriccables. Common test methods

BS EN 60811-100General

GEL/20/17

BS EN 60811-201Measurement of insulation thickness

will partially supersede BS EN 60811-1.1:1995

GEL/20/17

BS EN 60811-202Measurement of thickness and overalldimensions


GEL/20/17

BS EN 60811-203Measurement of overall dimensions


GEL/20/17

BS EN 60811-301Measurement of the permittivity at 23°C offilling compounds


GEL/20/17

BS EN 60811-302Measurement of the D.C. resistivity at 23°C and100°C of filling


GEL/20/17

BS EN 15643:—Sustainability of construction works.Sustainability assessment of buildings

BS EN 15643-1General framework

B/558

BS EN 15643-2Framework for the assessment ofenvironmental performance

B/558

BS EN 15890Fixed vertical road traffic signs. Visualperformance of retroreflective sheetingmaterials

B/509/3

BS EN 15892Railway applications. Noise emission.Measurement of noise inside driver’s cabs

RAE/1

DD CEN ISO/TS 17575:—Electronic fee collection. Application interfacedefinition for autonomous systems

DD CEN ISO/TS 17575-1Charging

EPL/278

DD CEN ISO/TS 17575-2Communication and connection to the lowerlayers

EPL/278

BS EN ISO 21427:—Water quality. Evaluation of genotoxicity bymeasurement of the induction of micronuclei

BS EN ISO 21427-2Mixed population method using the cell lineV79

will supersede BS ISO 21427-2:2006

EH/3/5

BS EN 60086:—Primary batteries

BS EN 60086-5:2005/Amendment 1Safety of batteries with aqueous electrolyte

CPL/35

BS EN 60268:—Sound system equipment

BS EN 60268-4 (Revision)Microphones


EPL/100

BS EN 13241:—Industrial, commercial and garage doors andgates. Product standard

BS EN 13241-1:2003/Amendment 1Products without fire resistance or smokecontrol characteristics

B/538

BS EN 13544:—Respiratory therapy equipment

BS EN 13544-2:2002/Amendment 1Tubing and connectors

CH/121/5

BS EN 13544-3:2001/Amendment 1Air entrainment devices

CH/121/5

BS EN 13633Building hardware. Electrically controlled panicexit systems for use on escape routes.Requirements and test methods

B/538

BS EN 13637Building hardware. Electrically controlledemergency exit systems for use on escaperoutes. Requirements and test methods

B/538

BS EN 13724 (Revision)Postal services. Apertures of private letter boxesand letter plates. Requirements and testmethods


SVS/4

BS EN 13751 (Revision)Foodstuffs. Detection of irradiated food usingphotostimulated luminescence


AW/-/3

BS EN 13798 (Revision)Hydrometry. Specification for a referenceraingauge pit


CPI/113/5

BS EN 13867:2002/Amendment 1Concentrates for haemodialysis and relatedtherapies

CH/105/2

BS EN 14081:—Timber structures. Strength graded structuraltimber with rectangular cross section

BS EN 14081-2 (Revision)Machine grading. Additional requirements forinitial type testing


B/518


BS EN 60811-512Tensile strength and elongation at break afterconditioning at elevated temperature; methodsspecific to polyethylene and polypropylenecompounds

will partially supersede BS EN 60811-4-2:2004

GEL/20/17

BS EN 60811-513Methods specific to polyethylene andpolypropylene compounds. Wrapping test afterconditioning


GEL/20/17

BS EN 60811-601Methods specific of the drop-point to fillingcompounds


GEL/20/17

BS EN 60811-602Separation of oil in filling compounds


GEL/20/17

BS EN 60811-603Measurement of total acid number of fillingcompounds


GEL/20/17

BS EN 60811-604Measurement of absence of corrosive gassescomponents in filling compounds


GEL/20/17

BS EN 60811-605Measurement of carbon black


GEL/20/17

BS EN 60811-606Methods for determining the density


GEL/20/17

BS EN 60811-607Test for the assessment of carbon blackdispersion in polyethylene and polypropylene


GEL/20/17

BS EN 61169:—Radio-frequency connectors

BS EN 61169-18Sectional specification. Radio frequency coaxialconnectors of type SSMA

EPL/46/2

BS EN 60811-501Tests for determining the mechanical propertiesinsulating and sheathing compounds


GEL/20/17

BS EN 60811-502Shrinkage test for insulations


GEL/20/17

BS EN 60811-503Shrinkage test for sheaths


GEL/20/17

BS EN 60811-504Bending tests at low temperature for insulationand sheaths


GEL/20/17

BS EN 60811-505Elongation at low temperature for insulationsand sheaths


GEL/20/17

BS EN 60811-506Impact test at low temperature for insulationsand sheaths


GEL/20/17

BS EN 60811-507Hot set test for cross-linked materials


GEL/20/17

BS EN 60811-508Pressure test at high temperature for insulationand sheaths


GEL/20/17

BS EN 60811-509Tests for resistance of insulations and sheaths tocracking


GEL/20/17

BS EN 60811-510Methods specific to polyethylene andpolypropylene compounds. Wrapping test afterthermal ageing in air


GEL/20/17

BS EN 60811-511Measurement of the melt flow index ofpolyethylene and polypropylene compounds


GEL/20/17

BS EN 60811-401Thermal ageing methods. Ageing in an air oven


GEL/20/17

BS EN 60811-402Water absorption tests


GEL/20/17

BS EN 60811-403Ozone resistance test on elastomericcompounds


GEL/20/17

BS EN 60811-404Mineral oil immersion test for sheaths madewith elastomeric compounds


GEL/20/17

BS EN 60811-405Thermal stability test for PVC insulations andPVC sheaths


GEL/20/17

BS EN 60811-406Resistance to environmental stress cracking ofpolyethylene and polypropylene compounds


GEL/20/17

BS EN 60811-407Measurement of mass increase of polyethyleneand polypropylene compounds


GEL/20/17

BS EN 60811-408Long-term stability test of polyethylene andpolypropylene compounds


GEL/20/17

BS EN 60811-409Loss of mass test for thermoplastic insulationsand sheaths


GEL/20/17

BS EN 60811-410Test method for copper-catalysed oxidativedegradation of polyolefin insulated conductors


GEL/20/17

BS EN 60811-411Lower temperature brittleness of fillingcompounds


GEL/20/17

BS EN 60811-412Thermal ageing methods. Ageing in an airbomb


GEL/20/17



BS ISO 4602 (Revision)Reinforcements. Woven fabrics. Determinationof number of yarns per unit length of warp andweft

will supersede BS ISO 4602:1997

PRI/42

BS ISO 4901Reinforced plastics based on unsaturatedpolyester resins. Determination of residualstyrene monomer content

will supersede BS 2782-4:Method 432A:1991

PRI/42

BS ISO 6356 (Revision)Textile floor coverings. Assessment of staticelectrical propensity. Walking test


PRI/3

BS ISO 6498:—Animal feeding stuffs. Preparation of testsamples

BS ISO 6498-1Terms and definitions

will partially supersede BS 5766-10:1999

AW/10

BS ISO 6498-2Guidelines

will partially supersede BS 5766-10:1999

AW/10

BS ISO 6721:—Plastics. Determination of dynamic mechanicalproperties

BS ISO 6721-11Glass transition temperature

PRI/21

BS ISO 7010:2003/Amendment 61Graphical symbols. Safety colours and safetysigns. Safety signs used in workplaces andpublic areas

PH/8/1

BS ISO 7718:—Aircraft. Passenger doors interface requirementsfor connection of passenger boarding bridge

BS ISO 7718-1Main deck doors

ACE/57

BS ISO 7792:—Plastics. Thermoplastic polyester (TP) mouldingand extrusion materials

BS ISO 7792-1Designation system and basis for specifications


PRI/82

BS ISO 7792-2Preparation of test specimens anddetermination of properties


PRI/82

BS ISO 1043:—Plastics. Symbols and abbreviated terms

BS ISO 1043-1Basic polymers and their special characteristics


PRI/10

BS ISO 1060:—Plastics. Homopolymer and copolymer resins ofvinyl chloride

BS ISO 1060-2Preparation of test samples and determinationof properties


PRI/82

BS ISO 1658:—Natural rubber (NR)

BS ISO 1658-2Evaluation procedure

will supersede BS 5738:1980

PRI/50/-/1

BS ISO 1872:—Plastics. Polyethylene (PE) moulding andextrusion materials

BS ISO 1872-2Preparation of test specimens anddetermination of properties


PRI/82

BS ISO 1926 (Revision)Rigid cellular plastics. Determination of tensileproperties


PRI/24

BS ISO 2076 (Revision)Textiles. Man-made fibres. Generic names


TCI/24

BS ISO 3767:—Tractors, machinery for agriculture and forestry,powered lawn and garden equipment. Symbolsfor operator controls and other displays

BS ISO 3767-2 (Revision)Symbols for agricultural tractors and machinery


AGE/6

BS ISO 4000:—Passenger car tyres and rims

BS ISO 4000-1 (Revision)Tyres (metric series)


AUE/4

BS EN 61169-19Sectional specification. Radio frequency coaxialconnectors of type SSMB

EPL/46/2

BS EN 61169-35Sectional specification. Radio frequency coaxialconnectors of type 2, 92

EPL/46/2

BS EN 61169-41Sectional specification. Radio frequency coaxialconnectors of type CQA

EPL/46/2

BS EN 61169-42Sectional specification. Radio frequency coaxialconnectors of type CQN

EPL/46/2

BS EN 62595Measurement methods of LED backlight unitfor liquid crystal displays

EPL/47

BS EN 62604:—Surface Acoustic Wave (SAW) and Bulk AcousticWave (BAW) dupliexers

BS EN 62604-2Guide to the use

EPL/49

BS ISO 5:—Photography and graphic technology. Densitymeasurements

BS ISO 5-1Terms, symbols and notations


CPW/42

BS ISO 5-2Geometric conditions for transmission density


CPW/42

BS ISO 5-3 (Revision)Spectral conditions


CPW/42

BS ISO 5-4 (Revision)Geometric conditions for reflection density


CPW/42

BS ISO 294:—Plastics. Injection moulding of test specimens ofthermoplastic materials

BS ISO 294-2Small tensile bars


PRI/21


DD ISO/TS 10303-1003Application module. Curve appearance

AMT/4

DD ISO/TS 10303-1004Application module. Elemental geometric shape

AMT/4

DD ISO/TS 10303-1007Application module. General surfaceappearance

AMT/4

DD ISO/TS 10303-1008Application module. Layer assignment

AMT/4

DD ISO/TS 10303-1009Application module. Shape appearance layers

AMT/4

DD ISO/TS 10303-1012Application module. Approval

AMT/4

DD ISO/TS 10303-1022Application module. Part and versionidentification

AMT/4

DD ISO/TS 10303-1025Application module. Alias identification

AMT/4

DD ISO/TS 10303-1026Application module. Assembly structure

AMT/4

DD ISO/TS 10303-1027Application module. Contextual shapepositioning

AMT/4

DD ISO/TS 10303-1032Application module. Shape property assignment

AMT/4

DD ISO/TS 10303-1040Application module. Process propertyassignment

AMT/4

DD ISO/TS 10303-1103Application module. Product class

AMT/4

DD ISO/TS 10303-1104Application module. Specified product

AMT/4

DD ISO/TS 10303-1106Application module. Extended measurerepresentation

AMT/4

DD ISO/TS 10303-1109Application module. Alternative solution

AMT/4

BS ISO 9241-420Selection procedures for physical input devices

PH/9

BS ISO 9801Ophthalmic instruments. Trial case lenses


CH/172/6

BS ISO 10203 (Revision)Iron ores. Determination of calcium content.Flame atomic absorption spectrometric method


ISE/58

BS ISO 10204 (Revision)Iron ores. Determination of magnesiumcontent. Flame atomic absorption spectrometricmethod


ISE/58

BS ISO 10303:—Industrial automation systems and integration.Product data representation and exchange

BS ISO 10303-58Integrated generic resource. Risk

AMT/4

BS ISO 10303-61Integrated generic resource. Systemsengineering representation

AMT/4

BS ISO 10303-229Application protocol. Exchange ofmanufacturing product information for forgedparts

AMT/4

BS ISO 10303-233Systems engineering data representation

AMT/4

BS ISO 10303-1264Application module. Risk

AMT/4

BS ISO 10303-1785Application module. Analysis representation

AMT/4

DD ISO/TS 10303:—Industrial automation systems and integration.Product data representation and exchange

DD ISO/TS 10303-403Application module. AP203 Configurationcontrolled 3D design of mechanical parts andassemblies

AMT/4

DD ISO/TS 10303-1001Application module. Appearance assignment

AMT/4

DD ISO/TS 7849:—Acoustics. Determination of airborne soundpower levels emitted by machinery usingvibration measurement

DD ISO/TS 7849-1Survey method estimating an upper limit of theA-weighted sound power level

EH/1

BS ISO 7919:—Mechanical vibration. Evaluation of machinevibration by measurements on rotating shafts

BS ISO 7919-2 (Revision)Land-based steam turbines and generators inexcess of 50 MW with normal operating speedsof 1500 r/min, 1800 r/min, 3000 r/min and 3600r/min


GME/21/5

BS ISO 8566:—Cranes. Cabins

BS ISO 8566-1General

MHE/3/5

BS ISO 8566-3Tower cranes

MHE/3/5

BS ISO 8596Ophthalmic optics. Visual acuity testing.Standard optotype and its presentation


CH/172/3

BS ISO 8695Tools for pressing. Punches. Nomenclature andterminology


MTE/12

BS ISO 8820:—Road vehicles. Fuse-links

BS ISO 8820-4Fuse-links with female contacts (Type A) andbolt-in contacts (Type B) and their test fixtures

AUE/16

BS ISO 8873:—Rigid cellular plastics

BS ISO 8873-1Spray-applied polyurethane foam for thermalinsulation

PRI/72

BS ISO 9241:—Ergonomic requirements for office work withvisual display terminals (VDTs)

BS ISO 9241-129Guidance on software individualization

PH/9



DD ISO/TS 10303-1433Application module. Project management

AMT/4

DD ISO/TS 10303-1434Application module. Project managementresource information

AMT/4

DD ISO/TS 10303-1435Application module. Organization structure

AMT/4

DD ISO/TS 10303-1436Application module. Project breakdown

AMT/4

DD ISO/TS 10303-1437Application module. Schedule

AMT/4

DD ISO/TS 10303-1438Application module. Work structure

AMT/4

DD ISO/TS 10303-1450Application module. System structure

AMT/4

DD ISO/TS 10303-1453Application module. Function based behaviour

AMT/4

DD ISO/TS 10303-1509Application module. Manifold surface

AMT/4

DD ISO/TS 10303-1514Application module. Advanced boundaryrepresentation

AMT/4

DD ISO/TS 10303-1628Application module. Design product datamanagement

AMT/4

DD ISO/TS 10303-1654Application module. Characteristic

AMT/4

DD ISO/TS 10303-1655Application module. Chemical substance

AMT/4

DD ISO/TS 10303-1667Application module. Extended basic geometry

AMT/4

DD ISO/TS 10303-1681Application module. Generic material aspects

AMT/4

DD ISO/TS 10303-1702Application module. Manifold subsurface

AMT/4

DD ISO/TS 10303-1252Application module. Probability

AMT/4

DD ISO/TS 10303-1255Application module. State definition

AMT/4

DD ISO/TS 10303-1256Application module. State observed

AMT/4

DD ISO/TS 10303-1262Application module. Task specification

AMT/4

DD ISO/TS 10303-1274Application module. Probability distribution

AMT/4

DD ISO/TS 10303-1275Application module. External class

AMT/4

DD ISO/TS 10303-1281Application module. Resource itemcharacterized

AMT/4

DD ISO/TS 10303-1282Application module. Resource managementcharacterized

AMT/4

DD ISO/TS 10303-1283Application module. Resource as realizedcharacterized

AMT/4

DD ISO/TS 10303-1291Application module. Plib class reference

AMT/4

DD ISO/TS 10303-1342Application module. Expression

AMT/4

DD ISO/TS 10303-1345Application module. Item definition structure

AMT/4

DD ISO/TS 10303-1349Application module. Incomplete data referencemechanism

AMT/4

DD ISO/TS 10303-1366Application module. Tagged text representation

AMT/4

DD ISO/TS 10303-1367Application module. Textual expressionrepresentation

AMT/4

DD ISO/TS 10303-1371Application module. State based behaviourrepresentation

AMT/4

DD ISO/TS 10303-1110Application module. Surface conditions

AMT/4

DD ISO/TS 10303-1111Application module. Classification withattributes

AMT/4

DD ISO/TS 10303-1112Application module. Specification control

AMT/4

DD ISO/TS 10303-1115Application module. Part collection

AMT/4

DD ISO/TS 10303-1129Application module. External properties

AMT/4

DD ISO/TS 10303-1130Application module. Derived shape element

AMT/4

DD ISO/TS 10303-1131Application module. Construction geometry

AMT/4

DD ISO/TS 10303-1132Application module. Associative text

AMT/4

DD ISO/TS 10303-1136Application module. Text appearance

AMT/4

DD ISO/TS 10303-1140Application module. Requirement identificationand version

AMT/4

DD ISO/TS 10303-1206Application module. Draughting annotation

AMT/4

DD ISO/TS 10303-1215Application module. Physical breakdown

AMT/4

DD ISO/TS 10303-1216Application module. Functional breakdown

AMT/4

DD ISO/TS 10303-1231Application module. Product data management

AMT/4

DD ISO/TS 10303-1233Application module. Requirement assignment

AMT/4

DD ISO/TS 10303-1248Application module. Product breakdown

AMT/4


BS ISO/IEC 11693:—Identification cards. Optical memory cards.General characteristics

BS ISO/IEC 11693-1Co-existence of optical memory with othermachine-readable technologies

IST/17

BS ISO 11783:—Tractors and machinery for agriculture andforestry. Serial control and communicationsdata network

BS ISO 11783-14Sequence control

AGE/32

BS ISO 11981Ophthalmic optics. Contact lenses and contactlens care products. Determination of physicalcompatibility of contact lens care products withcontact lenses


CH/172

BS ISO 12460:—Wood-based panels. Determination offormaldehyde release

BS ISO 12460-5Perforator method

B/541

DD ISO/TS 12854Gaseous media fire extinguishing systems.Physical properties and system design. Scalingfactors for Class B fuels other than heptane

FSH/18/6

BS ISO 12856Plastic railway sleepers

RAE/2

PD ISO/TR 12888:—Selected illustrations of gauge repeatability andreproducibility studies

PD ISO/TR 12888-1Continuous variables

SS/4

BS ISO 13351Fans for general purposes. Dimensions


MCE/17

DD ISO/TS 13584:—Industrial automation systems and integration.Parts library

DD ISO/TS 13584-35Implementation resources. Spreadsheet datainterface for parts library

AMT/4

BS ISO 10816:—Mechanical vibration. Evaluation of machinevibration by measurements on non-rotatingparts

BS ISO 10816-2 (Revision)Land-based steam turbines and generators inexcess of 50 MW with normal operating speedsof 1500 r/min, 1800 r/min, 3000 r/min and 3600r/min


GME/21/5

BS ISO 10927Determination of molecular mass and molecularmass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDITOF-MS)

PRI/21

BS ISO 10944Ophthalmic instruments. Synoptophores


CH/172/6

BS ISO 10972:—Cranes. Requirements for mechanisms

BS ISO 10972-2 (Revision)Mobile cranes


MHE/3/5

BS ISO 11093:—Paper and board. Testing of cores

BS ISO 11093-5 (Revision)Determination of characteristics of concentricrotation


PAI/11

BS ISO 11237:—Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulicapplications. Specification

BS ISO 11237-1 (Revision)Oil-based fluid applications


PRI/66

BS ISO 11237-2 (Revision)Water-based fluid applications


PRI/66

BS ISO 11339Adhesives. T-peel test for flexible-to-flexiblebonded assemblies


PRI/52

BS ISO 11382Optical materials and components.Characterization of optical materials used in theinfrared spectral range from 0,78 um to 100 um

CPW/172/3

DD ISO/TS 10303-1715Application module. Part occurrence

AMT/4

DD ISO/TS 10303-1749Application module. Styled curve

AMT/4

DD ISO/TS 10303-1750Application module. Text representation

AMT/4

DD ISO/TS 10303-1753Application module. Value with unit extension

AMT/4

DD ISO/TS 10303-1760Application module. Pre defined product datamanagement specializations

AMT/4

DD ISO/TS 10303-1762Application module. Generic productoccurrence

AMT/4

DD ISO/TS 10303-1784Application module. External analysisrepresentation

AMT/4

BS ISO 10341Ophthalmic instruments. Refractor heads


CH/172/6

BS ISO 10343Ophthalmic instruments. Ophthalmometers


CH/172/6

BS ISO 10352Fibre-reinforced plastics. Moulding compoundsand prepregs. Determination of mass per unitarea


PRI/42

BS ISO/IEC 10373:—Identification cards. Test methods

BS ISO/IEC 10373-6 (Revision)Proximity cards

will supersede BS ISO/IEC 10373-6:2001+A5:2007

IST/17

BS ISO 10685:—Ophthalmic optics. Spectacle frames electroniccatalogue and identification

BS ISO 10685-2Data specification

CH/172/3

BS ISO 10810Surface chemical analysis. X-ray photoelectronspectroscopy. Guidelines for analysis

CII/60



BS ISO 21748Guidance for the use of repeatability,reproducibility and trueness estimates inmeasurement uncertainty estimation

will supersede DD ISO/TS 21748:2004

SS/6

BS ISO 21749Measurement uncertainty for metrologicalapplications. Repeated measurements andnested experiments

will supersede DD ISO/TS 21749:2005

SS/6

BS ISO 22390:—Timber structures. Laminated veneer lumber(LVL)

BS ISO 22390-1Structural properties

B/518

DD ISO/TS 22745:—Industrial automation systems and integration.Open technical dictionaries and theirapplication to master data

DD ISO/TS 22745-11Guidelines for the formulation of terminology

AMT/4

DD ISO/TS 22745-13Identification of concepts and terminology

AMT/4

PD ISO/TR 22849Design recommendations for bevel gears

MCE/5/-/13

BS ISO 22857 (Revision)Health informatics. Guidelines on dataprotection to facilitate trans-border flows ofpersonal health information


IST/35

BS ISO 22867Forestry machinery. Vibration test code forportable hand-held machines with internalcombustion engine. Vibration at the handles


AGE/29

BS ISO 24917Space systems. General test requirements forlaunch vehicles

ACE/68/-/2

BS ISO 25902:—Titanium pipes and tubes. Non-destructivetesting

BS ISO 25902-2Ultrasonic examination for the detection oflongitudinal flaws

NFE/35

BS ISO 16063:—Methods for the calibration of vibration andshock transducers

BS ISO 16063-41Calibration of laser vibrometers

GME/21/2

DD ISO/TS 16457Earth’s ionosphere and plasmasphere. Model ofdistribution of density, temperature andeffective collision frequency of electrons

ACE/68/-/4

BS ISO 16895:—Wood-based panels. Dry process fibreboard

BS ISO 16895-2Requirements

B/541

BS ISO 16992 (Revision)Passenger car tyres. Spare unit substitutiveequipment (SUSE)


AUE/4

BS ISO 18280Plastics. Epoxy resins. Test methods

PRI/42

BS ISO 19142Geographic information. Web feature service

IST/36

BS ISO 19143Geographic information. Filter encoding

IST/36

PD ISO/IEC TR 20000:—Information technology. Service management

PD ISO/IEC TR 20000-4Process Reference Model

IST/15/-/8

PD ISO/IEC TR 20000-5Exemplar of an ISO/IEC 20000 IncrementalImplementation Plan

IST/15/-/8

BS ISO 20152:—Timber structures. Bond performance ofadhesives

BS ISO 20152-1Basic requirements

B/518

BS ISO 21581Timber structures. Static and cyclic lateral loadtesting of shear walls

B/518

BS ISO 14660:—Geometrical Product Specifications (GPS).Geometrical features

BS ISO 14660-3Extracted centre of a sphere

TDW/4

BS ISO 14708:—Implants for surgery. Active implantable medicaldevices

BS ISO 14708-5Circulatory support devices

CH/150/6

BS ISO 14708-6Particular requirements for active implantablemedical devices intended to treattachyarrhythmia (including implantabledefibrillators)

CH/150/6

BS ISO 15063Plastics. Polyols for use in the production ofpolyurethanes. Determination of hydroxylnumber by NIR spectroscopy

PRI/42

BS ISO 15254Ophthalmic optics and instruments. Electro-optical devices for enhancing low vision


CH/172/6

DD ISO/TS 15869Gaseous hydrogen and hydrogen blends. Landvehicle fuel tanks

PVE/3/8

BS ISO 16014:—Plastics. Determination of average molecularmass and molecular mass distribution ofpolymers using size-exclusion chromatography

BS ISO 16014-1 (Revision)General principles


PRI/21

BS ISO 16014-2 (Revision)Universal calibration method


PRI/21

BS ISO 16014-3 (Revision)Low-temperature method


PRI/21

BS ISO 16014-4 (Revision)High-temperature method


PRI/21

BS ISO 16014-5Light-scattering method

PRI/21


DD IEC/PAS 61169-35Sectional specification. Radio frequency coaxialconnectors of type 2, 92

EPL/46/2

DD IEC/PAS 61169-41Sectional specification. Radio frequency coaxialconnectors of type CQA

EPL/46/2

DD IEC/PAS 61169-42Sectional specification. Radio frequency coaxialconnectors of type CQN

EPL/46/2

DD IEC/PAS 62596Electrotechnical products. Guideline forsampling procedure for determination ofrestricted substances in electrotechnicalproducts

GEL/111

BS IEC 62598Nuclear instrumentation. Constructionalrequirements and classification of radiometricgauges

NCE/2

PD 6705-3Recommendations for the execution ofaluminium structures to BS EN 1090-3

B/525/9

PAS 100 (Revision)Specification for composted materials

will supersede PAS 100:2005

NA to BS EN 1995:—UK National Annex to Eurocode 5. Design oftimber structures

NA to BS EN 1995-1-1:2004/Amendment 1General. Common rules and rules for buildings

B/525/5

BS ISO 28803Ergonomics of the physical environment.Application of international standards topeople with special requirements

PH/9

BS ISO 29002:—Industrial automation systems and integration.Exchange of characteristic data

BS ISO 29002-5Identification scheme

AMT/4

BS ISO/IEC 29128Information technology. Security techniques.Verification of cryptographic protocols

IST/33

BS ISO/IEC 29146Information technology. Security techniques. A framework for access management

IST/33

PD ISO/IEC TR 29149Information technology. Security techniques.Best practices for time stamping services

IST/33

BS ISO/IEC 29150Information technology. Security techniques.Signcryption

IST/33

BS ISO 29262Production equipment for microsystems.Interface between grippers and handlingsystem

MTE/1

DD ISO/TS 29584Glass in building. Technical specification.Pendulum impact testing and classification ofsafety glass for use in buildings

B/520

DD IEC/TS 60318:—Electroacoustics. Simulators of human head andear

DD IEC/TS 60318-7Head and torso simulator for acousticmeasurements of air-conduction hearing aids

EPL/29

DD IEC/PAS 61169:—Radio-frequency connectors

DD IEC/PAS 61169-18Sectional specification. Radio frequency coaxialconnectors of type SSMA

EPL/46/2

DD IEC/PAS 61169-19Sectional specification. Radio frequency coaxialconnectors of type SSMB

EPL/46/2

BS ISO 26367:—Guidelines for assessing the adverseenvironmental impact of fire effluents

BS ISO 26367-1Fundamentals

FSH/16

BS ISO/IEC 27001 (Revision)Information technology. Security techniques.Information security management systems.Requirements

will supersede BS ISO/IEC 27001:2005

IST/33

BS ISO/IEC 27033:—Information technology. Security techniques. IT network security

BS ISO/IEC 27033-3Reference networking scenarios. Risks, designtechniques and control issues

IST/33

BS ISO/IEC 27033-4Securing communications between networksusing security gateways. Risks, designtechniques and control issues

IST/33

BS ISO/IEC 27033-5Securing remote access. Risks, design techniquesand control issues

IST/33

BS ISO/IEC 27033-6Securing communications across networks usingVirtual Private Networks (VPNs). Risks, designtechniques and control issues

IST/33

BS ISO 27468Nuclear fuel technology. Criticality evaluationmethodology for PWR burn up credit (BUC)

NCE/9

BS ISO 27730Information and documentation. Internationalstandard collection identifier (ISCI)

IDT/2/18

BS ISO 27769:—Wood-based panels. Wet process fibreboard

BS ISO 27769-2Specifications

B/541

BS ISO 27875Space systems. Re-entry risk management forunmanned spacecraft and launch vehicle orbitalstages

ACE/68

BS ISO 28802Ergonomics of the physical environment. Theassessment of environments by means of anenvironmental survey involving physicalmeasurements of the environment andsubjective responses of people

PH/9



Help Us to Help

You!




020 8996 9001


08/30087642 DCBS ISO 10140-1 Acoustics. Laboratorymeasurement of sound insulation of buildingelements. Part 1. Test codes

EH/1/6

08/30087646 DCBS ISO 10140-2 Acoustics. Laboratorymeasurement of sound insulation of buildingelements. Part 2. Measurement of airbornesound insulation

EH/1/6

08/30087650 DCBS ISO 10140-3 Acoustics. Laboratorymeasurement of sound insulation of buildingelements. Part 3. Measurement of impact soundinsulation

EH/1/6

08/30087655 DCBS ISO 10140-4 Acoustics. Laboratorymeasurement of sound insulation of buildingelements. Part 4. Measurement procedures andrequirements

EH/1/6

08/30087659 DCBS ISO 10140-5 Acoustics. Laboratorymeasurement of sound insulation of buildingelements. Part 5. Requirements for test facilitiesand equipment

EH/1/6

08/30099651 DCBS ISO 16900-1 Respiratory protective devices.Methods of test and test equipment. Part 1.Determination of inward leakage

PH/4

08/30099655 DCBS ISO 16900-3 Respiratory protective devices.Methods of test and test equipment. Part 3.Determination of particle filter penetration

PH/4

08/30099658 DCBS ISO 16900-4 Respiratory protective devices.Methods of test and test equipment. Part 4.Determination of gas filter capacity

PH/4

08/30128080 DCBS ISO/IEC 19770-2 Software assetmanagement. Part 2. Software identificationtag£18.00 members, £36.00 non-members

IST/15

Comments for the above document are required by28 February, 2009

08/30144212 DCBS ISO 4986 Steel and iron casting. Magneticparticle inspection

ISE/6

08/30144215 DCBS ISO 4987 Steel and iron castings. Liquidpenetrant inspection

ISE/6

08/30164455 DCBS 8468-3-1 Respiratory protective devices foruse against chemical, biological, radiologicaland nuclear (CBRN) agents. Part 3-1. Self-contained open-circuit compressed airbreathing apparatus incorporating a hood forescape. Specification

PH/4

08/30180387 DCBS 8878 Guide to good practice incommissioning accessible websites

IST/45

08/30180523 DCBS 8517 The use of general purpose securitydogs. Code of practice

GW/3/-/15

08/30182996 DCBS 8887-2 Design for manufacturing, assembly,disassembly and end-of-life processing. Part 2.Vocabulary

TDW/4

08/30193234 DCBS 8484 Code of practice for the provision oflone worker services

GW/3

DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –ADOPTIONS

All Draft British Standards are availablefrom BSI Customer Services (see ’How toorder’ on page 2)

Most drafts are charged at£10.00 to members and£20.00 to non-members.

Larger draft documents are charged at ahigher price according to the number ofpages and are priced individually below.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL by 31 January, 2009 unlessotherwise stated, to be considered by therelevant BSI committee.

Draft standards may be modified beforeadoption and issue as British Standards.

08/30017005 DCBS EN ISO 10848-4 Acoustics. Laboratorymeasurement of the flanking transmission ofairborne and impact noise between adjoiningrooms. Part 4. All other cases

EH/1/6


08/30084137 DCBS ISO 22538-6 Space systems. Oxygen safety.Part 6. Facility planning and implementation

ACE/68

DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –NATIONAL BRITISHSTANDARDS

You may now comment on any NationalBritish Standard online. BSI BritishStandards has launched a Draft Reviewsystem which allows access to the draftsof all National British Standards. Toenhance access of Drafts for PublicComment for the wider community, makecomments more visible and move intocollaborative working practices, you willnow be able to comment on any NationalBritish Standard by visitinghttp://www.bsigroup.com/drafts. Allyou need to do is register. This service isfree of charge.

Please note that the only standardsavailable on this service are pure BritishStandards (National Standards e.g:BS XXXX). European and internationaldocuments are not included at this time.

Deadlines for receipt of comments oneach of the individual drafts can be foundat http://www.bsigroup.com/drafts.The deadline for the following drafts is31 January, 2009 unless otherwisestated.

Should you wish to receive these drafts inhard copy format, they are available for afee from BSI Customer Services (see ’Howto order’ on page 2).

08/30113948 DCBS 2482 Specification for timber scaffoldboards

B/514/42

08/30142156 DCBS 5834-1 Surface boxes, guards andunderground chambers for utilities purposes.Part 1. Specification for guards and plinths

B/504

08/30142158 DCBS 5834-2 Surface boxes, guards andunderground chambers for utilities purposes.Part 2. Specification for boxes

B/504

08/30142165 DCBS 5834-4 Surface boxes, guards andunderground chambers for utilities purposes.Part 4. Specification for utility chambers

B/504

08/30154716 DCBS 5268-6-2 AMD1 Structural use of timber.Part 6-2. Code of practice for timber framewalls. Buildings other than dwellings notexceeding four storeys

B/525


08/30167126 DCBS EN ISO 14171 Welding consumables. Solidwire electrodes, tubular cored electrodes andelectrode/flux combinations for submerged arcwelding of non alloy and fine grain steels.Classification

WEE/39

08/30167362 DCBS ISO 10710 Water quality. Growth inhibitiontest with the marine and brackish watermacroalgae Ceramium tenuicorne

EH/3/5

08/30167904 DCBS ISO 4251-1 AMD1 Tyres (ply rating markedseries) and rims for agricultural tractors andmachines. Part 1. Tyre designation anddimensions, and approved rim contours

AUE/4


08/30167985 DCBS ISO 8664 AMD1 Tyres for agriculturaltractors and machines. Code-designated andservice-description marked radial drive-wheeltyres

AUE/4


08/30169640 DCBS ISO 17089-1 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas.Part 1. Meters for custody transfer andallocation measurement

CPI/30/5


08/30169888 DCBS EN ISO 6887-5 Microbiology of food andanimal feeding stuffs. Preparation of testsamples, initial suspension and decimal dilutionsfor microbiological examination. Part 5. Specificrules for the preparation of milk and milkproducts

AW/9


08/30169896 DCBS EN 61907 Guidance on communicationnetwork dependability engineering

DS/1

08/30170398 DCBS ISO 10932 Milk and milk products.Determination of the minimal inhibitoryconcentration (MIC) of antibiotics applicable tobifidobacteria and non-enterococcal lactic acidbacteria (LAB)

AW/5


08/30170415 DCBS ISO 5667-21 Water quality. Sampling. Part 21. Guidance on sampling of drinkingwater distributed by tankers or means otherthan distribution pipes

EH/3/6

08/30165412 DCBS ISO 5610-8 Tool holders with rectangularshank for indexable inserts. Part 8. Style K

MTE/18

08/30165416 DCBS ISO 5610-9 Tool holders with rectangularshank for indexable inserts. Part 9. Style L

MTE/18

08/30165420 DCBS ISO 5610-10 Tool holders with rectangularshank for indexable inserts. Part 10. Style N

MTE/18

08/30165424 DCBS ISO 5610-11 Tool holders with rectangularshank for indexable inserts. Part 11. Style R

MTE/18

08/30165427 DCBS ISO 5610-12 Tool holders with rectangularshank for indexable inserts. Part 12. Style S

MTE/18

08/30165431 DCBS ISO 5610-13 Tool holders with rectangularshank for indexable inserts. Part 13. Style T

MTE/18

08/30165435 DCBS ISO 5610-14 Tool holders with rectangularshank for indexable inserts. Part 14. Style H

MTE/18

08/30165441 DCBS ISO 5610-15 Tool holders with rectangularshank for indexable inserts. Part 15. Style V

MTE/18

08/30166507 DCBS ISO 10580 Resilient, textile and laminatefloor coverings. Test method for emissions ofvolatile organic compounds (VOC)

PRI/3

08/30166847 DCBS ISO 21254-1 Lasers and laser-relatedequipment. Test methods for laser radiation-induced damage threshold. Part 1. Definitionsand general principles

CPW/172/9

08/30166853 DCBS ISO 21254-3 Lasers and laser-relatedequipment. Test methods for laser radiation-induced damage threshold. Part 3. Assurance oflaser power (energy) handling capabilities

CPW/172/9

08/30167121 DCBS EN ISO 14174 Welding consumables. Fluxesfor submerged arc welding and electroslagwelding. Classification

WEE/39

08/30147086 DCBS ISO 690 Information and documentation.Guidelines for bibliographic references andcitations to information resources

IDT/2/2

08/30153135 DCBS ISO 28218 Radiation protection.Performance criteria for radiobioassay

NCE/2


08/30159962 DCBS EN 384 Structural timber. Determination ofcharacteristic values of mechanical propertiesand density

B/518

08/30161152 DCBS EN 13634 Protective footwear formotorcycle riders. Requirements and testmethods

PH/1

08/30164483 DCBS ISO 28540 Water quality. Determination of16 polycyclic aromatic hydrocarbons (PAH) inwater. Method using gas chromatography withmass spectrometric detection (GC-MS)

EH/3/2

08/30165376 DCBS ISO 5610-1 Tool holders with rectangularshank for indexable inserts. Part 1. Generalsurvey, correlation and determination ofdimensions

MTE/18

08/30165388 DCBS ISO 5610-2 Tool holders with rectangularshank for indexable inserts. Part 2. Style A

MTE/18

08/30165392 DCBS ISO 5610-3 Tool holders with rectangularshank for indexable inserts. Part 3. Style B

MTE/18

08/30165395 DCBS ISO 5610-4 Tool holders with rectangularshank for indexable inserts. Part 4. Style D

MTE/18

08/30165399 DCBS ISO 5610-5 Tool holders with rectangularshank for indexable inserts. Part 5. Style F

MTE/18

08/30165402 DCBS ISO 5610-6 Tool holders with rectangularshank for indexable inserts. Part 6. Style G

MTE/18

08/30165406 DCBS ISO 5610-7 Tool holders with rectangularshank for indexable inserts. Part 7. Style J

MTE/18

Draft British Standards for Public Comment continued...


08/30185788 DCBS EN 15864 Characterisation of waste.Leaching behaviour test for basiccharacterization. Dynamic monolithic leachingtest with continuous leachant renewal underconditions relevant for specified scenario(s)

B/508/3

Comments for the above document are required by31 December, 2008

08/30186451 DCBS EN 573-3 Aluminium and aluminium alloys.Chemical composition and form of wroughtproducts. Part 3. Chemical composition andform of products

NFE/35/5

08/30186605 DCBS EN 13381-2 Test methods for determiningthe contribution to the fire resistance ofstructural members. Part 2. Vertical protectivemembranes

FSH/22

08/30186609 DCBS EN 13381-3 Test methods for determiningthe contribution to the fire resistance ofstructural members. Part 3. Applied protectionto concrete members

FSH/22

08/30186613 DCBS EN 13381-5 Test methods for determiningthe contribution to the fire resistance ofstructural members. Part 5. Applied protectionto concrete/profiled sheet steel compositemembers

FSH/22

08/30186617 DCBS EN 13381-6 Test methods for determiningthe contribution to the fire resistance ofstructural members. Part 6. Applied protectionto concrete filled hollow steel columns

FSH/22

08/30186620 DCBS EN 13381-7 Test methods for determiningthe contribution to the fire resistance ofstructural members. Part 7. Applied protectionto timber members

FSH/22

08/30186890 DCBS EN 12490 Durability of wood and wood-based products. Preservative-treated solidwood. Determination of the penetration andretention of creosote in treated wood

B/515

08/30186893 DCBS EN 1014-1 Wood preservatives. Creosoteand creosoted timber. Methods of sampling andanalysis. Part 1. Procedure for sampling creosote

B/515

08/30186896 DCBS EN 1014-2 Wood preservatives. Creosoteand creosoted timber. Methods of sampling andanalysis. Part 2. Procedure for obtaining asample of creosote from creosoted timber forsubsequent analysis

B/515

08/30179725 DCBS EN 1889-2 AMD1 Machines forunderground mines. Mobile machines workingunderground. Safety. Part 2. Rail locomotives

MRE/1


08/30179728 DCBS EN 12321 AMD1 Underground miningmachinery. Specification for the safetyrequirements of armoured face conveyors

MRE/1


08/30179770 DCBS EN 12545 AMD1 Footwear, leather andimitation leather goods manufacturingmachines. Noise test code. Commonrequirements

MCE/3/12

08/30180269 DCBS EN 934-2 Admixtures for concrete, mortarand grout. Part 2. Concrete admixtures.Definitions, requirements, conformity, markingand labelling

B/517/3

08/30180275 DCBS EN 934-4 Admixtures for concrete, mortarand grout. Part 4. Admixtures for grout forprestressing tendons. Definitions, requirements,conformity, marking and labelling

B/517/3

08/30182118 DCBS EN 50397-3 Covered conductors foroverhead lines and the related accessories forrated voltages above 1 kV A.C. and notexceeding 36 kV A.C. Part 3. Guide to use

GEL/20/16

08/30182125 DCBS ISO 10679 Steel. Cast tool steel

ISE/6

08/30183528 DCBS EN 50518-2 Monitoring and alarm receivingcentre. Part 2. Requirements for technicalfacilities

GW/1/11

08/30185782 DCBS EN 15862 Characterization of waste.Compliance leaching test. One stage batchleaching test for monoliths at a fixed liquid tosurface area ratio (L/A) for test portions withfixed minimum dimensions

B/508/3


08/30185785 DCBS EN 15863 Characterisation of waste.Leaching behaviour test for basiccharacterisation. Dynamic monolithic leachingtest with periodic leachant renewal, under fixedtest conditions

B/508/3


08/30170610 DCBS EN ISO 12543-5 Glass in building.Laminated glass and laminated safety glass. Part5. Dimensions and edge finishing

B/520/1

08/30172385 DCBS ISO 11452-11 Road vehicles. Componenttest methods for electrical disturbances fromnarrowband radiated electromagnetic energy.Part 11. Radiated immunity test method using areveberation chamber

AUE/16

08/30172620 DCBS EN ISO 8536-6 Infusion equipment formedical use. Part 6. Freeze drying closures forinfusion bottles

CH/212

08/30172647 DCBS ISO 8729-2 Ships and marine technology.Marine radar reflectors. Part 2. Active type

EPL/80

08/30173839 DCBS ISO 3548-2 Plain bearings. Thin walled halfbearings with or without flange. Part 2.Measurement of wall-thickness and flangethickness

MCE/12


08/30174756 DCBS EN 13128 AMD2 Safety of machine tools.Milling machines (including boring machines)

MTE/1

08/30175103 DCBS ISO 27108 Water quality. Determination ofselected plant treatment agents and biocideproducts. Method using solid-phasemicroextraction (SPME) followed by gaschromatography-mass spectrometry (GC-MS)

EH/3/2

08/30177295 DCBS ISO 14341 Welding consumables. Wireelectrodes and deposits for gas shielded metalarc welding of non alloy and fine grain steels.Classification

WEE/39

08/30178269 DCBS EN 1827 AMD1 Respiratory protectivedevices. Half masks without inhalation valvesand with separable filters to protect againstgases or gases and particles or particles only.Requirements, testing, marking

PH/4


08/30178500 DCBS EN 61169-40 Radio-frequency connectors.Part 40. Sectional specification for 2.4 series R.Fconnectors

EPL/46/2



08/30188793 DCBS EN 50525-2-31 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-31. Cables forgeneral applications. Single core non-sheathedcables with thermoplastic PVC insulation

GEL/20/17


08/30188796 DCBS EN 50525-2-41 Low voltage energy cablesof rated voltages up to and including 450/750 V.Part 2-41. Cables for general applications. Singlecore cables with crosslinked silicone rubberinsulation

GEL/20/17


08/30188799 DCBS EN 50525-2-42 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-42. Cables forgeneral applications. Single core non-sheathedcables with crosslinked EVA insulation

GEL/20/17


08/30188804 DCBS EN 50525-2-51 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-51. Cables forgeneral applications. Oil resistant control cableswith thermoplastic PVC insulation

GEL/20/17


08/30188810 DCBS EN 50525-2-71 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-71. Cables forgeneral applications. Flat tinsel cables (cords)with thermoplastic PVC insulation

GEL/20/17


08/30188813 DCBS EN 50525-2-72 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-72. Cables forgeneral applications. Flat divisible cables (cords)with thermoplastic PVC insulation

GEL/20/17


08/30188818 DCBS EN 50525-2-81 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-81. Cables forgeneral applications. Cables with crosslinkedelastomeric covering for arc welding

GEL/20/17


08/30188437 DCBS EN 13766 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for thetransfer of liquid petroleum gas and liquefiednatural gas. Specification

PRI/66

08/30188440 DCBS EN 1911 Stationary source emissions.Determination of mass concentration ofgaseous chlorides expressed as HCl. Standardreference method

EH/2/1

08/30188443 DCBS EN 15876-1 Electronic fee collection.Conformity evaluation of on board unit androadside equipment to EN 15509. Part 1. Testsuite structure and test purposes£18.00 members, £36.00 non-members

EPL/278


08/30188764 DCBS EN 50525-1 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 1. Generalrequirements

GEL/20/17


08/30188771 DCBS EN 50525-2-11 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-11. Cables forgeneral applications. Flexible cables withthermoplastic PVC insulation

GEL/20/17


08/30188779 DCBS EN 50525-2-12 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-12. Cables forgeneral applications. Extensible leads withthermoplastic PVC insulation

GEL/20/17


08/30188783 DCBS EN 50525-2-21 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-21. Cables forgeneral applications. Flexible cables withcrosslinked elastomeric insulation

GEL/20/17


08/30188788 DCBS EN 50525-2-22 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-22. Cables forgeneral applications. High flexibility braidedcables with crosslinked elastomeric insulation

GEL/20/17


08/30186900 DCBS EN 1014-3 Wood preservatives. Creosoteand creosoted timber. Methods of sampling andanalysis. Part 3. Determination of thebenzo[a]pyrene content of creosote

B/515

08/30186903 DCBS EN 1014-4 Wood preservatives. Creosoteand creosoted timber. Methods of sampling andanalysis. Part 4. Determination of the water-extractable phenols content of creosote

B/515

08/30187190 DCBS EN 13888 Grouts for tiles. Definitions andspecifications

B/539

08/30187193 DCBS EN 15871 Ventilation for buildings. Fireresisting duct sections

RHE/2

08/30187196 DCBS EN 1533 Wood and parquet flooring.Determination of bending strength under staticload. Test methods

B/543

08/30187552 DCBS EN 13306 Maintenance. Maintenanceterminology

DS/1

08/30187719 DCBS EN 1493 Vehicle lifts

MHE/12

08/30187745 DCBS EN 12566-6 Small wastewater treatmentsystems for up to 50 PT. Part 6. Prefabricatedtreatment units for septic tank effluent

B/505

08/30187751 DCBS EN 1457-1 Chimneys. Clay/ceramic flueliners. Part 1. Flue liners operating under dryconditions. Requirements and test methods

B/506/3

08/30187754 DCBS EN 1457-2 Chimneys. Clay ceramic flueliners. Part 2. Flue liners operating under wetconditions. Requirements and test methods

B/506/3

08/30188125 DCBS EN 15269-3 Extended application of testresults for fire resistance and/or smoke controlfor door, shutter and openable windowassemblies, including their elements of buildinghardware. Part 3. Timber hinged and pivoteddoorsets

FSH/22

08/30188146 DCBS EN 10169 Continuously organic coated (coilcoated) steel flat products. Technical deliveryconditions

ISE/10



08/30190898 DCBS EN 60745-2-14 AMD Hand-held motor-operated electric tools. Safety. Part 2-14.Particular requirements for planers

CPL/61/6

08/30190901 DCBS EN 60745-2-18 AMD Hand-held motoroperated electric tools. Safety. Part 2-18.Particular requirements for strapping tools

CPL/61/6

08/30190906 DCBS EN 60745-2-20 AMD Hand-held motoroperated electric tools. Safety. Part 2-20.Particular requirements for band saws

CPL/61/6

08/30190909 DCBS EN 60745-2-21 AMD Hand-held motoroperated electric tools. Safety. Part 2-21.Particular requirements for drain cleaners

CPL/61/6

08/30190912 DCBS EN 60745-2-3 AMD Hand-held motoroperated electric tools. Safety. Part 2-3.Particular requirements for grinders, polishersand disk-type sanders

CPL/61/6

08/30190915 DCBS EN 60745-2-4 AMD Hand-held motoroperated electric tools. Safety. Part 2-4.Particular requirements for sanders andpolishers other than disk type

CPL/61/6

08/30190962 DCBS ISO 3213 Polypropylene (PP) pipes. Effect oftime and temperature on expected strength

PRI/88/4

08/30190974 DCBS ISO 26428-9 Digital cinema (D-cinema)distribution master. Part 9. Image pixel structurelevel 3. Serial digital interface signal formatting

CPW/36


08/30190977 DCBS ISO 26429-8 Digital cinema (D-cinema)packaging. Part 8. Packing list

CPW/36


08/30190980 DCBS ISO 26429-9 Digital cinema (D-cinema)packaging. Part 9. Asset mapping and filesegmentation

CPW/36


08/30190989 DCBS ISO 26430-5 Digital cinema (D-cinema)operations. Part 5. Packaging. Security log eventclass and constraints

CPW/36


08/30189949 DCBS EN 61558-2-20 Safety of transformers,reactors, power supply units and similarproducts for supply voltages up to 1100 V. Part 2-20. Particular requirements and tests forsmall reactors

PEL/96


08/30190494 DCBS ISO 5351 Pulps. Determination of limitingviscosity number in cupri-ethylenediamine (CED)solution

PAI/11

08/30190636 DCBS ISO 10961 Gas cylinders. Cylinder bundles.Design, manufacture, identification and testing

PVE/3/7

Comments for the above document are required by9 January, 2009

08/30190661 DCBS ISO 7752-3 Cranes. Controls. Layout andcharacteristics. Part 3. Tower cranes

MHE/3/5


08/30190664 DCBS ISO 7752-1 Cranes. Controls. Layout andcharacteristics. Part 1. General principles

MHE/3/5


08/30190670 DCBS ISO 29681 Pulps. Determination of pH ofsalted water extracts

PAI/11

08/30190684 DCBS ISO 18436-5 Condition monitoring anddiagnostics of machines. Requirements forqualification and assessment of personnel. Part 5. Lubricant laboratory technician/analyst

GME/21/7


08/30190852 DCBS EN 61000-4-21 Electromagneticcompatibility (EMC). Part 4-21. Testing andmeasurement techniques. Reverberationchamber test methods£18.00 members, £36.00 non-members

GEL/210/12

08/30190887 DCBS EN 60745-2-8 AMD Hand-held motoroperated electric tools. Safety. Part 2-8.Particular requirements for shears and nibblers

CPL/61/6

08/30190894 DCBS EN 60745-2-9 AMD Hand-held motoroperated electric tools. Safety. Part 2-9.Particular requirements for tappers

CPL/61/6

08/30188821 DCBS EN 50525-2-82 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-82. Cables forgeneral applications. Cables with crosslinkedelastomeric insulation for decorative chains

GEL/20/17


08/30188826 DCBS EN 50525-2-83 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-83. Cables forgeneral applications. Multicore cables withcrosslinked silicone rubber insulation

GEL/20/17


08/30188833 DCBS EN 50525-3-11 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 3-11. Cables withspecial fire performance. Flexible cables withhalogen-free thermoplastic insulation, and lowemission of smoke

GEL/20/17


08/30188836 DCBS EN 50525-3-21 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 3-21. Cables withspecial fire performance. Flexible cables withhalogen-free crosslinked insulation, and lowemission of smoke

GEL/20/17


08/30188839 DCBS EN 50525-3-31 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 3-31. Cables withspecial fire performance. Single core non-sheathed cables with halogen-freethermoplastic insulation, and low emission ofsmoke

GEL/20/17


08/30188842 DCBS EN 50525-3-41 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 3-41. Cables withspecial fire performance. Single core non-sheathed cables with halogen-free crosslinkedinsulation, and low emission of smoke

GEL/20/17


08/30189945 DCBS EN 61558-2-12 Safety of transformers,reactors, power supply units and similarproducts for supply voltages up to 1100 V. Part 2-12. Particular requirements and tests forconstant voltage transformers and powersupply units incorporating constant voltagestransformers

PEL/96



08/30191883 DCBS EN 60401-2 Terms and nomenclature forcores made of magnetically soft ferrite. Part 2.Reference of dimensions

EPL/51

08/30191891 DCBS EN 61936-1 Power installations exceeding 1kV A.C. Part 1. Common rules

PEL/99

08/30191902 DCBS EN 61204-7 AMD1 Low voltage powersupplies, D.C. output. Part 7. Safetyrequirements

PEL/22

08/30191907 DCBS EN 13623 Chemical disinfectants andantiseptics. Quantitative suspension test for theevaluation of bactericidal activity againstLegionella pneumophila of chemicaldisinfectants for aqueous systems. Test methodand requirements (phase 2, step 1)

CH/216

08/30192094 DCBS EN 3911 Aerospace series. Six lobe recess.Geometrical definition

ACE/12

08/30192115 DCBS EN 4473 Aerospace series. Aluminiumpigmented coatings for fasteners. Technicalspecification

ACE/12

08/30192124 DCBS ISO/IEC 23000-4 AMD2 Informationtechnology. Multimedia application format(MPEG-A). Part 4. Musical slide show applicationformat

IST/37

08/30192173 DCBS EN 62542 Environmental standardizationfor electrical and electronic products andsystems. Standardization of environmentalaspects. Glossary of terms

GEL/111


08/30192184 DCBS ISO 15928-4 Houses. Description ofperformance. Part 4. Fire safety

B/500

08/30192220 DCBS EN 60335-1 AMD F1 Household and similarelectrical appliances. Safety. Part 1. Generalrequirements

CPL/61


CPL/61

08/30191324 DCBS EN 61029-2-1 AMD Safety of transportablemotor-operated electric tools. Part 2-1.Particular requirements for circular saw benches

CPL/61/6

08/30191327 DCBS EN 61029-2-8 AMD Safety of transportablemotor-operated electric tools. Part 2-8.Particular requirements for single spindlevertical moulders

CPL/61/6

08/30191341 DCBS EN 60670-24 AMD1 Boxes and enclosuresfor electrical accessories for household andsimilar fixed electrical installations. Part 24.Particular requirements for enclosures forhousing protective devices and other powerdissipating electrical equipment

PEL/23

08/30191365 DCBS EN 50388 Railway applications. Powersupply and rolling stock. Technical criteria forthe coordination between power supply(substation) and rolling stock to achieveinteroperability

GEL/9/3

08/30191444 DCBS ISO 18334 Pallets for materials handling.Quality of assembly of new, wooden, flatpallets

PKW/0/-/11


08/30191453 DCBS EN 50527-1 Assessment of human exposureat the workplace for persons bearing activeimplantable medical devices (AIMD) in electric,magnetic and electromagnetic fields withfrequencies from 0 Hz to 300 GHz. Part 1.General

GEL/106

08/30191626 DCBS ISO 27186 Active implantable medicaldevices. Four-pole connector system forimplantable cardiac rhythm managementdevices. Dimensional and test requirements

CH/150/6

08/30191664 DCBS EN 50522 Earthing of power installationsexceeding 1 kV A.C

PEL/99

08/30191694 DCBS EN ISO 23328-2 Breathing system filters foranaesthetic and respiratory use. Part 2. Non-filtration aspects

CH/121/5


08/30191879 DCBS EN 3838 Aerospace series. Requirementsand tests on user-applied markings on aircraftelectrical cables

ACE/6


08/30190998 DCBS ISO 26431-2 Digital cinema (D-cinema)quality. Part 2. Reference projector andenvironment

CPW/36


08/30191123 DCBS ISO 9362 Banking. Bankingtelecommunication messages. Bank identifiercodes

IST/12


08/30191166 DCBS EN 60079-25 Explosive atmospheres. Part 25. Intrinsically safe systems

GEL/31/13

08/30191192 DCBS EN 60079-20-1 Explosive atmospheres. Part 20-1. Material characteristics. Gas andvapour classification, test methods and data

GEL/31

08/30191241 DCBS EN 60444-6 Measurement of quartz crystalunit parameters. Part 6. Measurement of drivelevel dependence (DLD)

EPL/49

08/30191251 DCBS EN 62553 Methods of measurement fordigital network. Performance characteristics ofterrestrial digital multimedia transmissionnetwork

EPL/103


08/30191273 DCBS EN 61977 Fibre optic interconnectingdevices and passive components. Fibre opticfilters. Generic specification

GEL/86/2


08/30191281 DCBS EN 60320-2-4 AMD1 Appliance couplers for household and similar general purposes.Part 2-4. Appliance couplers dependent onappliance weight for engagement

PEL/23/3

08/30191289 DCBS EN 50304/60350 AMD Electric cookingranges, hobs, ovens and grills for householduse. Methods for measuring performance

CPL/59

08/30191292 DCBS EN 62077 Fibre optic interconnectingdevices and passive components. Fibre opticcirculators. Generic specification

GEL/86/2




08/30192677 DCBS EN 6059-307 Aerospace series. Electricalcables, installation. Protection sleeves. Testmethods. Part 307. Ageing

ACE/6


08/30192697 DCBS ISO/IEC 9797-1 Information technology.Security techniques. Message authenticationcodes (MACs). Part 1. Mechanisms using a blockcipher

IST/33


08/30192767 DCBS EN 62301 Household electrical appliances.Management of standby power

CPL/59


08/30192771 DCBS EN 60704-2-2 Household and similarelectrical appliances. Test code for thedetermination of airborne acoustical noise. Part 2-2. Particular requirements for fan heaters

CPL/59


08/30192819 DCBS EN 50428 AMD2 Switches for householdand similar fixed electrical installations.Collateral standard. Switches and relatedaccessories for use in home and buildingelectronic systems (HBES)

PEL/23


08/30193565 DCBS EN 61784-5 Industrial communicationnetworks. Profiles. Part 5. Installation offieldbuses

AMT/7


DOCUMENTS NOT ISSUEDAS DPCs

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

EN 1463:—Road marking materials. Retroreflecting roadstuds

EN 1463-1Initial performance requirements

The above draft has been circulated for UAPvote. Copies are available on request from thecontact point (below).Contact: Committee Service CentreEmail: [email protected]

B/509/2

08/30192512 DCBS EN ISO 10079-1 Medical suction equipment.Part 1. Electrically powered suction equipment.Safety requirements

CH/121/1


08/30192541 DCBS EN ISO 10079-3 Medical suction equipment.Part 3. Suction equipment powered from avacuum or pressure source

CH/121/1


08/30192545 DCBS EN ISO 23747 Anaesthetic and respiratoryequipment. Peak expiratory flow meters for theassessment of pulmonary function inspontaneously breathing humans

CH/121/5


08/30192553 DCBS EN ISO 18777 Transportable liquid oxygensystems for medical use. Particular requirements

CH/121/5


08/30192648 DCBS EN 6049-007 Aerospace series. Electricalcables, installation. Protection sleeve in meta-aramid fibres. Part 007. Self-wrappingmechanical and electrical protective sleeve,flexible post installation operating temperaturefrom -55°C to 260°C. Product standard

ACE/6


08/30192660 DCBS EN 62541-7 OPC Unified ArchitectureSpecification. Part 7. Profiles

AMT/7


08/30192664 DCBS EN 62541-9 OPC Unified ArchitectureSpecification. Part 9. Alarms and Conditions£18.00 members, £36.00 non-members

AMT/7


08/30192668 DCBS EN 62541-10 OPC Unified ArchitectureSpecification. Part 10. Programs

AMT/7


08/30192674 DCBS EN 6059-100 Aerospace series. Electricalcables, installation. Protection sleeves. Testmethods. Part 100. General

ACE/6



CPL/61


CPL/61

08/30192276 DCBS ISO 22009 Space systems. Spaceenvironment (natural and artificial). Model ofthe Earth’s magnetospheric magnetic field

ACE/68


08/30192282 DCBS EN 3155-002 Aerospace series. Electricalcontacts used in elements of connection. Part 002. List and utilization of contacts

ACE/6/-/3

08/30192288 DCBS EN ISO 179-1 Plastics. Determination ofCharpy impact properties. Part 1. Non-instrumented impact test

PRI/21

08/30192293 DCBS EN 60086-5 AMD1 Primary batteries. Part 5.Safety of batteries with aqueous electrolyte

CPL/35


08/30192301 DCBS EN 60384-26 Fixed capacitors for use inelectronic equipment. Part 26. Sectionalspecification. Aluminium electrolytic capacitorswith conductive polymer solid electrolyte

EPL/40X


08/30192480 DCBS EN ISO 17510-2 Sleep apnoea breathingtherapy. Part 2. Masks and application

CH/121/5


08/30192501 DCBS EN ISO 10079-2 Medical suction equipment.Part 2. Manually powered suction equipment

CH/121/5


08/30192505 DCBS EN ISO 17510-1 Sleep apnoea breathingtherapy. Part 1. Sleep apnoea breathing therapyequipment

CH/121/5



CEN EUROPEANSTANDARDS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CEN but have not yet beenpublished as BS ENs. BSI has an obligationto adopt all ENs and to withdraw anyconflicting British Standards (BSs) or partsof BSs. The following will beimplemented as BS ENs or as amendmentsto BS ENs shortly. Notification of theirimplementation will be given in theBS EN Publications section of the relevantedition of Update Standards.

EN 485:—Aluminium and aluminium alloys. Sheet, stripand plate

EN 485-2:2008Mechanical properties

NFE/35/5

EN 500:—Mobile road construction machinery. Safety

EN 500-2:—Specific requirements for road-milling machines

AMENDMENT 1:October 2008

to EN 500-2:2006B/513/1

EN 500-3:—Specific requirements for soil-stabilisingmachines and recycling machines


to EN 500-3:2006B/513/1

EN 528:2008Rail dependent storage and retrievalequipment. Safety requirements

MHE/14

EN 539:—Clay roofing tiles for discontinuous laying.Determination of physical characteristics

EN 539-2:—Test for frost resistance

CORRIGENDUM 1:October 2008

to EN 539-2:2006B/542/3

EN 894:—Safety of machinery. Ergonomics requirementsfor the design of displays and control actuators

EN 894-1:1997+A1:2008General principles for human interactions withdisplays and control actuators

PH/9

prEN 696Ductile iron pipes, fittings, accessories and theirjoints for gas pipelines. Requirements and testmethods

This standard has been circulated under theCEN UAP procedure. A copy of the documentmay be obtained from the contact point(below) on request.Contact: Committee Service CentreEmail: [email protected]

PSE/10

prEN 1447Plastics piping systems. Glass-reinforcedthermosetting plastics (GRP) pipes.Determination of long-term resistance tointernal pressure

This standard has been circulated under theCEN UAP procedure. A copy of the documentmay be obtained from the contact point(below) on request.Contact: Committee Service CentreEmail: [email protected]

PRI/88/2

prEN ISO 5182Resistance welding. Materials for electrodes andancillary equipment

This standard has been circulated under theCEN UAP procedure to adopt ISO 5182:2008 asan identical European Standard. ISO 5182:2008has already been adopted as identicalBS ISO 5182:2008 in the UK.Contact: Committee Service CentreEmail: [email protected]

WEE/29

prEN ISO 17678Milk and milk products. Determination of milkfat purity by gas chromatographic analysis oftriglycerides (Reference method)

This document has been issued as a seconddraft for parallel enquiry in CEN and ISO. Copiesare available on request from the contact point(below) under document referenceAW/5_08_0060.Contact: Committee Service CentreEmail: [email protected]

AW/5

prEN ISO 24373Welding consumables. Solid wires and rods forfusion welding of copper and copper alloys.Classification

This document which will not be issued as aDraft for Public Comment is identical toISO 24373:2008 and has been circulated toCEN members for voting. Please sumbit anycomments to the Programme Manager (below)by 31 December, 2008.Contact: Anne HannanEmail: [email protected]

WEE/39

EN 1755:2000/Amendment 1Safety of industrial trucks. Operation inpotentially explosive atmospheres. Use inflammable gas, vapour, mist and dust

The above draft has been circulated for UAPvote. Copies are available on request from thecontact point (below).Contact: Committee Service CentreEmail: [email protected]

MHE/7

EN 13155:—Cranes. Safety

EN 13155-1:2003/Amendment 2Non-fixed load lifting attachments

This amendment addresses the revisedMachinery Directive 2006/42/EC by adding anew informative annex ZB. Annex ZA ismodified to include the Official Journal citationand presumption of conformity to the relevantEssential Requirements. The references havebeen updated and there are also minor changesto 7.2.1 minimum marking to require additionaldetails of the manufacturer and/or theauthorised representative, and to clarify themachinery designation and year ofmanufacture.Contact: Mike HodsonEmail: [email protected]

MHE/3

EN 15056:2006/Amendment 1Cranes. Requirements for container handlingspreaders

This amendment addresses the revisedMachinery Directive 2006/42/EC by adding anew informative annex ZB. A new clause 5.5.3covering electrical connection to the crane hasalso been added. The references have beenupdated and 7.1 Information for use has beenmodified in respect of the information on statictest load to be given in the machine manual,not the technical file. Table B.1, which identifiessuitable sets of standards, has also beenupdated.Contact: Mike HodsonEmail: [email protected]

MHE/3

EN ISO 20361Liquid pumps and pump units. Noise test code.Grades 2 and 3 of accuracy

It has been proposed that the above standardbe issued under the Unique AcceptanceProcedure. BS EN ISO 20361 will supersedeBS EN 12639:2000. Any comments on thisproposal should be received by the ProgrammeManager (below) by 15 February, 2009.

Please note that only editorial, as opposed totechnical, changes can be proposed to thedocument.Contact: Manjit MatharuEmail: [email protected]

MCE/6

Documents Not Issused as DPCs continued...


EN 13411-7:—Symmetric wedge socket


to EN 13411-7:2006MHE/2

EN 13747:—Precast concrete products. Floor plates for floorsystems


to EN 13747:2005B/524

EN 13757:—Communication systems for meters and remotereading of meters

EN 13757-5:2008Wireless relaying

PEL/894

EN 14267:—Irrigation techniques. Irrigation hydrants


to EN 14267:2004AGE/30

EN 14459:—Control functions in electronic systems for gasburners and gas burning appliances. Methodsfor classification and assessment


to EN 14459:2007GSE/22

EN 15181:2008Measuring method of the energy consumptionof gas fired ovens

GSE/35

EN 15258:2008Precast concrete products. Retaining wallelements

B/524

EN 15327:—Railway applications. Passenger alarmsubsystem

EN 15327-1:2008General requirements and passenger interfacefor the passenger emergency brake system

RAE/4

EN 15355:2008Railway applications. Braking. Distributor valvesand distributor-isolating devices

RAE/4

EN 15427:2008Railway applications. Wheel/rail frictionmanagement. Flange lubrication

RAE/3/-/6

EN 12385:—Steel wire ropes. Safety

EN 12385-1:2002+A1:2008General requirements

MHE/2

EN 13138:—Buoyant aids for swimming instruction

EN 13138-1:2008Safety requirements and test methods forbuoyant aids to be worn

SW/136

EN 13297:—Textile floor coverings. Classification of needledpile floor coverings


to EN 13297:2007AGE/30

EN 13411:—Terminations for steel wire ropes. Safety

EN 13411-1:—Thimbles for steel wire rope slings


to EN 13411-1:2002MHE/2

EN 13411-2:—Splicing of eyes for wire rope slings


to EN 13411-2:2001MHE/2

EN 13411-3:—Ferrules and ferrule-securing


to EN 13411-3:2004MHE/2

EN 13411-4:—Metal and resin socketing


to EN 13411-4:2002MHE/2

EN 13411-5:—U-bolt wire rope grips


to EN 13411-5:2003MHE/2

EN 13411-6:—Asymmetric wedge socket


to EN 13411-6:2004MHE/2

EN 894-3:2000+A1:2008Control actuators

PH/9

EN 1005:—Safety of machinery. Human physicalperformance

EN 1005-1:2001+A1:2008Terms and definitions

PH/9/4

EN 1170:—Test method for glass-fibre reinforced cement

EN 1170-8:2008Cyclic weathering type test

B/524

EN 1264:—Water based surface embedded heating andcooling systems

EN 1264-2:2008Floor heating. Prove methods for thedetermination of the thermal output usingcalculation and test methods

RHE/6

EN 1264-5:2008Heating and cooling surfaces embedded infloors, ceilings and walls. Determination of thethermal output

RHE/6

EN 1434:—Heat meters

EN 1434-3:2008Data exchange and interfaces

PEL/894

EN 1634:—Fire resistance and smoke control tests for door,shutter and, openable window assemblies andelements of building hardware

EN 1634-1:2008Fire resistance tests for doors, shutters andopenable windows

FSH/24

EN 12002:2008Adhesives for tiles. Determination of transversedeformation for cementitious adhesives andgrouts

B/539

EN 12003:2008Adhesives for tiles. Determination of shearadhesion strength of reaction resin adhesives

B/539

EN 12336:2005+A1:2008Tunnelling machines. Shield machines, thrustboring machines, auger boring machines, liningerection equipment. Safety requirements

B/513


EN 15564:2008Precast concrete products. Resin boundconcrete. Requirements and test methods

B/524

EN 15613:2008Knee and elbow protectors for indoor sports.Safety requirements and test methods

PH/3

EN 15620:2008Steel static storage systems. Adjustable palletracking. Tolerances, deformations andclearances

MHE/8

CEN REPORTS

CEN/TR 15775:2008Child use and care articles. National translationsof warnings and instructions for use in child useand care articles standards

CW/39

CEN TECHNICALSPECIFICATIONS

CEN/TS 99001:2008Business support. Support services provided tosmall enterprises. Terminology, quality andperformance

SVS/1/1

CENELEC PUBLICATIONS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CENELEC but have not yetbeen published as BS ENs. BSI has anobligation to adopt all ENs and towithdraw any conflicting BritishStandards (BSs) or parts of BSs. Thefollowing will be implemented as BS ENsor as amendments to BS ENs shortly.Notification of their implementation willbe given in the BS EN Publications sectionof the relevant edition of UpdateStandards.

EN 50106:2008Safety of household and similar electricalappliances. Particular rules for routine testsreferring to appliances under the scope ofEN 60335-1

CPL/61

EN 50131:—Alarm systems. Intrusion systems

EN 50131-5-3:—Requirements for interconnections equipmentusing radio frequency techniques


to EN 50131-5-3:2005GW/1/1

EN 60335-2-27:—(IEC 60335-2-27:2002/A1:2004)Particular requirements for appliances for skinexposure to ultraviolet and infrared radiation


to EN 60335-2-27:2003CPL/61/01

EN 60335-2-27:—(IEC 60335-2-27:2002/A2:2007)Particular requirements for appliances for skinexposure to ultraviolet and infrared radiation


to EN 60335-2-27:2003CPL/61/01

EN 60335-2-43:—(IEC 60335-2-43:2002/A2:2008)Particular requirements for clothes dryers andtowel rails


to EN 60335-2-43:2003CPL/61/07

EN 60335-2-60:—(IEC 60335-2-60:2002/A2:2008)Particular requirements for whirlpool baths andwhirlpool spas


to EN 60335-2-60:2003CPL/61/07

EN 60335-2-61:—(IEC 60335-2-61:2002/A2:2008)Particular requirements for thermal-storageroom heaters


to EN 60335-2-61:2003CPL/61/07

EN 60335-2-75:—(IEC 60335-2-75:2002/A2:2008)Particular requirements for commercialdispensing appliances and vending machines


to EN 60335-2-75:2004CPL/61/5

EN 60335-2-98:—(IEC 60335-2-98:2002/A2:2008)Particular requirements for humidifiers


to EN 60335-2-98:2003CPL/61/07

EN 60404:—Magnetic materials

EN 60404-2:—(IEC 60404-2:1998/A1:2008)Methods of measurement of magneticproperties of electrical steel sheet and strip bymeans of an Epstein frame

AMENDMENT 1:CORRIGENDUM 1:October 2008

to EN 60404-2:1998ISE/NFE/5

EN 50465:2008Gas appliances. Fuel cell gas heating appliance.Fuel cell gas heating appliance of nominal heatinput inferior or equal to 70 kW

GEL/105

EN 55014:—Electromagnetic compatibility. Requirements forhousehold appliances, electric tools and similarapparatus

EN 55014-2:—(IEC CISPR 14-2:1997/A2:2008)Immunity. Product family standard


to EN 55014-2:1997GEL/210/11

EN 60079:—Explosive atmospheres

EN 60079-14:2008(IEC 60079-14:2007)Electrical installations design, selection anderection

GEL/31/11

EN 60137:2008(IEC 60137:2008)Insulated bushings for alternating voltagesabove 1000 V

PEL/36

EN 60335:—Household and similar electrical appliances.Safety

EN 60335-2-5:—(IEC 60335-2-5:2002/A2:2008)Particular requirements for dishwashers


to EN 60335-2-5:2003CPL/61/14

EN 60335-2-8:—(IEC 60335-2-8:2002/A2:2008)Particular requirements for shavers, hair clippersand similar appliances


to EN 60335-2-8:2003CPL/61/01

EN 60335-2-14:—(IEC 60335-2-14:2006/A1:2008)Particular requirements for kitchen machines


to EN 60335-2-14:2003CPL/61/01

EN 60335-2-15:—(IEC 60335-2-15:2002/A2:2008)Particular requirements for appliances forheating liquids


to EN 60335-2-15:2005CPL/61/07

CEN European Standards continued...


EN 61858:2008(IEC 61858:2008)Electrical insulation systems. Thermal evaluationof modifications to an established wire-woundEIS

GEL/112

EN 62227:2008(IEC 62227:2008)Multimedia home server systems. Digital rightspermission code

EPL/100

EN 62288:2008(IEC 62288:2008)Maritime navigation and radiocommunicationequipment and systems. Presentation ofnavigation-related information on shipbornenavigational displays. General requirements,methods of testing and required test results

EPL/80

EN 62305:—Protection against lightning

EN 62305-3:—(IEC 62305-3:2006)Physical damage to structures and life hazard

CORRIGENDUM 1:September 2008

to EN 62305-3:2006GEL/81

EN 62317:—Ferrite cores. Dimensions

EN 62317-14:2008(IEC 62317-14:2008)EFD-cores for use in power supply applications

EPL/51

HARMONIZATIONDOCUMENTS

CENELEC HD 629:—Test requirements on accessories for use onpower cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42) kV

CENELEC HD 629.1 S2:—Cables with extruded insulation

AMENDMENT 1:September 2008

to CENELEC HD 629.1 S2:2006£38.00 members, £40.00 non-members

GEL/20/11

CENELEC HD 629.2 S2:—Cables with impregnated paper insulation


to CENELEC HD 629.2 S2:2006£38.00 members, £40.00 non-members

GEL/20/11

EN 60851:—Winding wires. Test methods

EN 60851-5:2008(IEC 60851-5:2008)Electrical properties

GEL/55

EN 60966:—Radio frequency and coaxial cable assemblies

EN 60966-2-1:2008(IEC 60966-2-1:2003)Sectional specification for flexible coaxial cableassemblies

EPL/46/1

EN 60966-3:2008(IEC 60966-3:2003)Sectional specification for semi-flexible coaxialcable assemblies

EPL/46/1

EN 61000:—Electromagnetic compatibility (EMC)

EN 61000-3-3:2008(IEC 61000-3-3:2008)Limits. Limitation of voltage changes, voltagefluctuations and flicker in public low-voltagesupply systems, for equipment with ratedcurrent ≤ 16 A per phase and not subject toconditional connection

GEL/210/12

EN 61039:2008(IEC 61039:2008)Classification of insulating liquids

GEL/10

EN 61291:—Optical amplifiers

EN 61291-4:2008(IEC 61291-4:2008)Multichannel applications. Performancespecification template

GEL/86/3

EN 61291-6-1:2008(IEC 61291-6-1:2008)Interfaces. Command set

GEL/86/3

EN 61857:—Electrical insulation systems. Procedures forthermal evaluation

EN 61857-22:2008(IEC 61857-22:2008)Specific requirements for encapsulated-coilmodel. Wire-wound electrical insulation system(EIS)

GEL/112

EN 60512:—Connectors for electronic equipment. Tests andmeasurements

EN 60512-26-100:2008(IEC 60512-26-100:2008)Measurement setup, test and referencearrangements and measurements forconnectors according to IEC 60603-7. Tests 26ato 26g

EPL/48

EN 60598:—Luminaires

EN 60598-1:2008(IEC 60598-1:2008)General requirements and tests

CPL/34/4

EN 60669:—Switches for household and similar fixed-electrical installations

EN 60669-1:—(IEC 60669-1:1998/A2:2006)General requirements


to EN 60669-1:1999PEL/23

EN 60695:—Fire hazard testing

EN 60695-1-30:2008(IEC 60695-1-30:2008)Guidance for assessing the fire hazard ofelectrotechnical products. Preselection testingprocess. General guidelines

GEL/89

EN 60794:—Optical fibre cables

EN 60794-2-41:2008(IEC 60794-2-41:2008)Indoor cables. Product specification for simplexand duplex buffered A4 fibres

GEL/86/1

EN 60810:—(IEC 60810:2003/A1:2008)Lamps for road vehicles. Performancerequirements


to EN 60810:2003CPL/34/1

EN 60825:—Safety of laser products

EN 60825-4:—(IEC 60825-4:2006/A1:2008)Laser guards


to EN 60825-4:2006EPL/76

CENELEC Publications continued...


IEC CISPR 15:—Limits and methods of measurement of radiodisturbance characteristics of electrical lightingand similar equipment


to IEC CISPR 15:2005£14.40 members, £15.00 non-members

GEL/210/11

IEC CISPR 16:—Specification for radio disturbance andimmunity measuring apparatus and methods

IEC CISPR 16-2-1:2008(Edition 2)

Methods of measurement of disturbances andimmunity. Conducted disturbancemeasurements£156.48 members, £163.00 non-members

GEL/210/12

ISO PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following ISO publications areavailable from BSI Customer Services (see’How to order’ on page 2)

ISO 445:2008(Edition 3)

Pallets for materials handling. Vocabulary£112.32 members, £117.00 non-members

PKW/0/-/11

Will be implemented as an identical British Standard


Hard coal. Determination of total moisture£45.12 members, £47.00 non-members

PTI/16

Will not be implemented as a British Standard

ISO 1750:—Pesticides and other agrochemicals. Commonnames

AMENDMENT 5:November 2008

to ISO 1750:1981£137.28 members, £143.00 non-members

AW/81



Prevailing torque type steel nuts. Mechanicaland performance properties£65.28 members, £68.00 non-members

FME/9/1


IEC 61000:—Electromagnetic compatibility (EMC)

IEC 61000-4:—Testing and measurement techniques

IEC 61000-4-6:2008(Edition 3)

Immunity to conducted disturbances, inducedby radio-frequency fields£137.28 members, £143.00 non-members

GEL/210/12

IEC 61000-4-30:2008(Edition 2)

Power quality measurement methods£98.00 members, £163.00 non-members

GEL/210/12

IEC 61606:—Audio and audiovisual equipment. Digital audioparts. Basic measurement methods of audiocharacteristics

IEC 61606-3:2008Professional use£120.00 members, £125.00 non-members

EPL/100

IEC 62059:—Electricity metering equipment (A.C.).Dependability

IEC 62059-31:2008Accelerated reliability testing. Elevatedtemperature and humidity£168.00 members, £175.00 non-members

PEL/13

IEC/TS 62239:2008(Edition 2)

Process management for avionics. Preparationof an electronic components management plan£78.72 members, £82.00 non-members

GEL/107

IEC 80601:—Medical electrical equipment

IEC 80601-2-58:2008Particular requirements for the basic safety andessential performance of lens removal devicesand vitrectomy devices for ophthalmic surgery£86.40 members, £90.00 non-members

CH/62/4

IEC 80601-2-59:2008Particular requirements for the basic safety andessential performance of screeningthermographs for human febrile temperaturescreening£96.00 members, £100.00 non-members

CH/62/4

IEC PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following IEC publications areavailable from BSI Customer Services (see’How to order’ on page 2)

IEC 60034:—Rotating electrical machines

IEC 60034-30:2008Efficiency classes of single-speed three-phasecage induction motors£59.52 members, £62.00 non-members

PEL/2

IEC/TS 60815:—Selection and dimensioning of high-voltageinsulators intended for use in pollutedconditions

IEC/TS 60815-1:2008Definitions, information and general principles£137.28 members, £143.00 non-members

PEL/36

IEC/TS 60815-2:2008Ceramic and glass insulators for A.C. systems£72.00 members, £75.00 non-members

PEL/36

IEC/TS 60815-3:2008Polymer insulators for A.C. systems£65.28 members, £68.00 non-members

PEL/36

IEC 60853:—Calculation of cyclic and emergency currentrating of cables

IEC 60853-1:—Cyclic rating factor for cables up to andincluding 18/30 (36) kV


to IEC 60853-1:1985£14.40 members, £15.00 non-members

GEL/20/16

IEC 60853-2:—Cyclic rating of cables greater than 18/30 (36)kV and emergency ratings for cables of allvoltages


to IEC 60853-2:1989£35.52 members, £37.00 non-members

GEL/20/16



Technical product documentation. Parts lists£38.40 members, £40.00 non-members

TDW/4


ISO 8362:—Injection containers and accessories

ISO 8362-2:2008(Edition 2)

Closures for injection vials£33.60 members, £35.00 non-members

CH/212


ISO 8362-5:2008(Edition 2)

Freeze drying closures for injection vials£45.12 members, £47.00 non-members

CH/212



Tools for moulding. Mould bases. Roundlocating elements and spacers£28.80 members, £30.00 non-members

MTE/12


ISO/IEC 9075:2008 (CD-ROM)Information technology. Database languages.SQL£242.88 members, £253.00 non-members

IST/40

This CD contains Parts 1-4, 9-11, 13 and 14 ofISO/IEC 9075.



Water quality. Measurement of gross betaactivity in non-saline water. Thick sourcemethod£49.92 members, £52.00 non-members

EH/3



Paper and board. Compressive strength. Short-span test£38.40 members, £40.00 non-members

PAI/11


ISO 4666:—Rubber, vulcanized. Determination oftemperature rise and resistance to fatigue inflexometer testing

ISO 4666-2:2008(Edition 2)

Rotary flexometer£45.12 members, £47.00 non-members

PRI/22


ISO 4706:2008Gas cylinders. Refillable welded steel cylinders.Test pressure 60 bar and below£91.20 members, £95.00 non-members

PVE/3/3



Sensory analysis. Vocabulary£137.28 members, £143.00 non-members

AW/12



Powered industrial trucks and tractors. Brakeperformance and component strength£49.92 members, £52.00 non-members

MHE/7


ISO 7176:—Wheelchairs

ISO 7176-10:2008(Edition 2)

Determination of obstacle-climbing ability ofelectrically powered wheelchairs£33.60 members, £35.00 non-members

CH/173/1


ISO 7240:—Fire detection and alarm systems

ISO 7240-28:2008Fire protection control equipment£78.72 members, £82.00 non-members

FSH/12/4


ISO/IEC 7501:—Identification cards. Machine readable traveldocuments

ISO/IEC 7501-1:2008 (CD-ROM)(Edition 5)

Machine readable passport£25.92 members, £27.00 non-members

IST/17


ISO 2470:—Paper, board and pulps Measurement of diffuseblue reflectance factor

ISO 2470-2:2008Outdoor daylight conditions (D65 brightness)£38.40 members, £40.00 non-members

PAI/11


ISO 2575:—Road vehicles. Symbols for controls, indicatorsand tell-tales



AUE/12


ISO 2898:—Plastics. Plasticized poly (vinyl chloride)(PVC-P)moulding and extrusion materials

ISO 2898-2:2008(Edition 4)

Preparation of test specimens anddetermination of properties£33.60 members, £35.00 non-members

PRI/82


ISO 3767:—Tractors, machinery for agriculture and forestry,powered lawn and garden equipment. Symbolsfor operator controls and other displays

ISO 3767-2:2008(Edition 3)

Symbols for agricultural tractors and machinery£70.08 members, £73.00 non-members

AGE/6


ISO 4254:—Agricultural machinery. Safety

ISO 4254-7:2008(Edition 2)

Combine harvesters, forage harvesters andcotton harvesters£100.80 members, £105.00 non-members

AGE/32


ISO 4254-9:2008(Edition 2)

Seed drills£62.40 members, £65.00 non-members

AGE/32



Hydrometry. Water level measuring devices£65.28 members, £68.00 non-members

CPI/113/5


ISO Publications continued...


ISO/TR 11955:2008Hybrid-electric road vehicles. Guidelines forcharge balance measurement£45.12 members, £47.00 non-members

PEL/69



Petroleum and natural gas industries. Steel drillpipe£137.28 members, £143.00 non-members

PSE/17/-/5


ISO 12004:—Metallic materials. Sheet and strip.Determination of forming-limit curves

ISO 12004-1:2008Measurement and application of forming-limit.Diagrams in the press shop£57.60 members, £60.00 non-members

ISE/NFE/4/2


ISO 12004-2:2008Determination of forming-limit curves inlaboratory£86.40 members, £90.00 non-members

ISE/NFE/4/2


ISO 13041:—Test conditions for numerically controlledturning machines and turning centres

ISO 13041-2:2008Geometric tests for machines with a verticalworkholding spindle£91.20 members, £95.00 non-members

MTE/1


ISO/TS 13434:2008Geosynthetics. Guidelines for the assessment ofdurability£94.08 members, £98.00 non-members

B/553



Petroleum and natural gas industries. Drillingfluid materials. Specifications and tests£129.60 members, £135.00 non-members

PSE/17/-/3



Protective clothing. Clothing to protect againstheat and flame£73.92 members, £77.00 non-members

PH/3/2


ISO/IEC 11695:—Identification cards. Optical memory cards.Holographic recording method

ISO/IEC 11695-1:2008Physical characteristics£21.12 members, £22.00 non-members

IST/17


ISO/IEC 11695-2:2008Dimensions and location of accessible opticalarea£14.40 members, £15.00 non-members

IST/17


ISO/IEC 11695-3:2008Optical properties and characteristics£14.40 members, £15.00 non-members

IST/17


ISO/IEC 11801:—Information technology. Generic cabling forcustomer premises

AMENDMENT 1:CORRIGENDUM 1:October 2008

to ISO/IEC 11801:2002TCT/7


ISO 11900:—Tools for pressing. Ball-lock punch retainers

ISO 11900-2:2008(Edition 2)

Types C and D, reduced for light duty£33.60 members, £35.00 non-members

MTE/12



Tools for pressing. Guide pillar mountings£28.80 members, £30.00 non-members

MTE/12


ISO/TR 11954:2008Fuel cell road vehicles. Maximum speedmeasurement£38.40 members, £40.00 non-members

PEL/69


ISO 10303:—Industrial automation systems and integration.Product data representation and exchange

ISO 10303-59:2008Integrated generic resource. Quality of productshape data£194.88 members, £203.00 non-members

AMT/4

Will not be implemented as a British Standard. Isapproved as suitable for use in the UK

ISO/TS 10303:—Industrial automation systems and integration.Product data representation and exchange

ISO/TS 10303-1052:2007 (CD-ROM)(Edition 2)

Application module. Default tolerance£83.52 members, £87.00 non-members

AMT/4


ISO 10407:—Petroleum and natural gas industries. Rotarydrilling equipment

ISO 10407-2:2008Inspection and classification of used drill stemelements£175.68 members, £183.00 non-members

PSE/17/-/4


ISO/IEC 10646:— (CD-ROM)Information technology. Universal Multiple-Octet Coded Character Set (UCS)

AMENDMENT 4:July 2008

to ISO/IEC 10646:2003£112.32 members, £117.00 non-members

IST/5


ISO 10907:—Tools for moulding. Locating rings

ISO 10907-1:2008(Edition 2)

Locating rings for mounting without thermalinsulating sheets in small or medium moulds(types A and B)£38.40 members, £40.00 non-members

MTE/12


ISO 10993:—Biological evaluation of medical devices

ISO 10993-7:2008(Edition 2)

Ethylene oxide sterilization residuals£129.60 members, £135.00 non-members

CH/194




e-mail

your order

[email protected]

ISO 16000:—Indoor air

ISO 16000-13:2008Determination of total (gas and particle-phase)polychlorinated dioxin-like biphenyls (PCBs) andpolychlorinated dibenzo-p-dioxidibenzofurans(PCDDs/PCDFs). Collection on sorbent-backedfilters£83.52 members, £87.00 non-members

EH/2/3


ISO/IEC 16022:—Information technology. Automaticidentification and data capture techniques.Data matrix bar code symbology specification


to ISO/IEC 16022:2006IST/34


ISO 16634:—Food products. Determination of the totalnitrogen content by combustion according tothe Dumas principle and calculation of thecrude protein content

ISO 16634-1:2008Oilseeds and animal feeding stuffs£83.52 members, £87.00 non-members

AW/4


ISO 18436:—Condition monitoring and diagnostics ofmachines. Requirements for qualification andassessment of personnel

ISO 18436-4:2008Field lubricant analysis£57.60 members, £60.00 non-members

GME/21/7


ISO 18436-6:2008Acoustic emission£49.92 members, £52.00 non-members

GME/21/7


ISO 18436-7:2008Thermography£62.40 members, £65.00 non-members

GME/21/7



Imaging materials. Compact discs (CD-ROM).Method for estimating the life expectancybased on the effects of temperature andrelative humidity£65.28 members, £68.00 non-members

CPW/42


ISO/IEC 14496-4:— (CD-ROM)Conformance testing


to ISO/IEC 14496-4:2004£11.52 members, £12.00 non-members

IST/37



Reference hardware description£223.68 members, £233.00 non-members

IST/37



Advanced video coding£194.88 members, £203.00 non-members

IST/37


ISO/IEC 14496-12:2008(Edition 3)

ISO base media file format£137.28 members, £143.00 non-members

IST/37


ISO 15783:—Seal-less rotodynamic pumps. Class II.Specification

AMENDMENT 1:November 2008


MCE/6


ISO 15784:—Intelligent transport systems (ITS). Dataexchange involving roadside modulescommunication

ISO 15784-1:2008General principles and documentationframework of application profiles£45.12 members, £47.00 non-members

EPL/278


ISO 15784-3:2008Application profile-data exchange (AP-DATEX)£57.60 members, £60.00 non-members

EPL/278


ISO/TR 15847:2008Graphic technology. Graphical symbols forprinting press systems and finishing systems,including related auxiliary equipment£120.00 members, £125.00 non-members

PAI/43



Petroleum and natural gas industries.Corrosion-resistant alloy seamless tubes for useas casing, tubing and coupling stock. Technicaldelivery conditions£129.60 members, £135.00 non-members

PSE/17/-/5



Fire safety. Vocabulary£105.60 members, £110.00 non-members

FSH/9


ISO/IEC 14102:2008(Edition 2)

Information technology. Guideline for theevaluation and selection of CASE tools£94.08 members, £98.00 non-members

IST/15



Welding consumables. Covered electrodes formanual metal arc welding of nickel and nickelalloys. Classification£62.40 members, £65.00 non-members

WEE/39



Petroleum and natural gas industries.Downhole equipment. Packers and bridge plugs£78.72 members, £82.00 non-members

PSE/17/-/4


ISO/IEC 14496:—Information technology. Coding of audio-visualobjects


AMENDMENT 20:August 2008


IST/37





IST/37




ISO 23868:2008Document management. Monitoring andverification of information stored on 130 mmoptical media£38.40 members, £40.00 non-members

IDT/1/1


ISO/TR 24156:2008Guidelines for using UML notation interminology work£65.28 members, £68.00 non-members

TS/1


ISO 24394:2008Welding for aerospace applications.Qualification test for welders and weldingoperators. Fusion welding of metalliccomponents£83.52 members, £87.00 non-members

WEE/-/1


ISO 24538:2008Plastics. Homopolymer and copolymer resins ofvinyl chloride. Determination of residual vinylchloride monomer by gas-chromatographicanalysis of dry powder£45.12 members, £47.00 non-members

PRI/21


ISO/IEC 24727:—Identification cards. Integrated circuit cardprogramming interfaces

ISO/IEC 24727-4:2008Application programming interface (API)administration£129.60 members, £135.00 non-members

IST/17


ISO/IEC 24757:2008Information technology. Keyboard interactionmodel. Machine-readable keyboard description£146.88 members, £153.00 non-members

ICT/-/1


ISO 26424:2008Fine ceramics (advanced ceramics, advancedtechnical ceramics). Determination of theabrasion resistance of coatings by a micro-scaleabrasion test£57.60 members, £60.00 non-members

RPI/13


ISO 28702:2008Rubber and plastics hoses and tubing. Textile-reinforced types. Sub-ambient temperaturecrush test£28.80 members, £30.00 non-members

PRI/66


ISO 21212:2008Intelligent transport systems. Communicationsaccess for land mobiles (CALM). 2G Cellularsystems£38.40 members, £40.00 non-members

EPL/278


ISO 21213:2008Intelligent transport systems. Communicationsaccess for land mobiles (CALM). 3G Cellularsystems£38.40 members, £40.00 non-members

EPL/278


ISO/IEC 21827:2008(Edition 2)

Information technology. Security techniques.Systems Security Engineering. CapabilityMaturity Model® (SSE-CMM®)£146.88 members, £153.00 non-members

IST/33

Will be implemented as a British Standard

ISO 22702:— (CD-ROM)Utility lighters. General consumer-safetyrequirements



CW/32


ISO 22915:—Industrial trucks. Verification of stability

ISO 22915-1:2008General£38.40 members, £40.00 non-members

MHE/7


ISO/IEC 23000:—Information technology. Multimedia applicationformat (MPEG-A)

ISO/IEC 23000-7:2008 (CD-ROM)Open access application format£91.20 members, £95.00 non-members

IST/37


ISO/IEC 23000-9:2008 (CD-ROM)Digital Multimedia Broadcasting applicationformat£94.08 members, £98.00 non-members

IST/37



Imaging materials. Optical disc media. Storagepractices£49.92 members, £52.00 non-members

CPW/42



Imaging materials. Recordable compact discsystems. Method for estimating the lifeexpectancy based on the effects of temperatureand relative humidity£78.72 members, £82.00 non-members

CPW/42


ISO/IEC 19776:—Information technology. Computer graphics,image processing and environmental datarepresentation. Extensible 3D (X3D) encodings

ISO/IEC 19776-2:2008(Edition 2)

Classic VRML encoding£28.80 members, £30.00 non-members

IST/31


ISO 20283:—Mechanical vibration. Measurement of vibrationon ships

ISO 20283-2:2008Measurement of structural vibration£57.60 members, £60.00 non-members

GME/21/5


ISO 20712:—Water safety signs and beach safety flags

ISO 20712-1:2008 (CD-ROM)Specifications for water safety signs used inworkplaces and public areas£105.60 members, £110.00 non-members

PH/8/1


ISO 20860:—Road vehicles. 50 ohms impedance radiofrequency connection system interface

ISO 20860-1:2008Dimensions and electrical requirements£49.92 members, £52.00 non-members

AUE/9



ISO 29767:2008Thermal insulating products for buildingapplications. Determination of short-term waterabsorption by partial immersion£33.60 members, £35.00 non-members

B/540/8


ISO 29768:2008Thermal insulating products for buildingapplications. Determination of lineardimensions of test specimens£33.60 members, £35.00 non-members

B/540/8


ISO 29769:2008Thermal insulating products for buildingapplications. Determination of behaviour underpoint load£45.12 members, £47.00 non-members

B/540/8


ISO 29770:2008Thermal insulating products for buildingapplications Determination of thickness forfloating-floor insulating products£33.60 members, £35.00 non-members

B/540/8


ISO 29771:2008Thermal insulating materials for buildingapplications. Determination of organic content£38.40 members, £40.00 non-members

B/540/8


ISO 29467:2008Thermal insulating products for buildingapplications. Determination of squareness£33.60 members, £35.00 non-members

B/540/8


ISO 29468:2008Thermal insulating products for buildingapplications. Determination of flatness£28.80 members, £30.00 non-members

B/540/8


ISO 29469:2008Thermal insulating products for buildingapplications. Determination of compressionbehaviour£45.12 members, £47.00 non-members

B/540/8


ISO 29471:2008Thermal insulating products for buildingapplications. Determination of dimensionalstability under constant normal laboratoryconditions (23°C/50% relative humidity)£38.40 members, £40.00 non-members

B/540/8


ISO 29472:2008Thermal insulating products for buildingapplications. Determination of dimensionalstability under specified temperature andhumidity conditions£33.60 members, £35.00 non-members

B/540/8


ISO 29764:2008Thermal insulating products for buildingapplications. Determination of deformationunder specified compressive load andtemperature conditions£33.60 members, £35.00 non-members

B/540/8


ISO 29765:2008Thermal insulating products for buildingapplications. Determination of tensile strengthperpendicular to faces£33.60 members, £35.00 non-members

B/540/8


ISO 29766:2008Thermal insulating products for buildingapplications. Determination of tensile strengthparallel to faces£33.60 members, £35.00 non-members

B/540/8


ISO 28722:2008Vitreous and porcelain enamels. Characteristicsof enamel coatings applied to steel panelsintended for architecture£33.60 members, £35.00 non-members

STI/33


ISO 28723:2008Vitreous and porcelain enamels. Determinationof the edge covering on enamelled steel plateto be used in heat exchangers£33.60 members, £35.00 non-members

STI/33


ISO 28762:2008Vitreous and porcelain enamels. Enamelcoatings applied to steel for writing surfaces.Specification£28.80 members, £30.00 non-members

STI/33


ISO 28763:2008Vitreous and porcelain enamels. Regenerative,enamelled and packed panels for air-gas andgas-gas heat exchangers. Specifications£45.12 members, £47.00 non-members

STI/33


ISO 28764:2008Vitreous and porcelain enamels. Production ofspecimens for testing enamels on sheet steel,sheet aluminium and cast iron£33.60 members, £35.00 non-members

STI/33


ISO/TR 29381:2008Metallic materials. Measurement of mechanicalproperties by instrumented indentation test.Indentation tensile properties£78.72 members, £82.00 non-members

ISE/NFE/4


ISO 29465:2008Thermal insulating products for buildingapplications. Determination of length andwidth£28.80 members, £30.00 non-members

B/540/8


ISO 29466:2008Thermal insulating products for buildingapplications. Determination of thickness£45.12 members, £47.00 non-members

B/540/8




Help Us to Help

You!




020 8996 9001


BS Code Guide

Documents

Transcript of BS Code Guide