bq kelas f-arki

000000KLINIK KESIHATAN 3 BUKIT MINYAK, P.PINANG 000000B3/ 1

KUARTERS KELAS F

ITEMDESCRIPTION UNIT QTY RATE

NOPAVIOR, PLASTERER AND TILE FIXER================================Railing

a MR 19

Cement and sand (1:6) with an approved plasticiser as specified

b 13mm thick to sloping soffit of stairs MS 28

c 13mm thick to sloping soffit of landing beam MS 15

d 13mm thick to sloping soffit of landing slab MS 14

e 13mm thick to open strings of staircase 280mm (extreme) wide MS 8

PAINTER========

Stairs

f On plastered sloping soffit of stairs. MS 28

g On plastered soffit of landing slab. MS 14

h On plastered sides and soffit of landing beams. MS 15

j Plastered sides of raking open string of staircase 280mm wide (extreme) wide MS 22

TOTAL CARRIED TO COLLECTION :

900mm high railing constructed of 200mmm x 60mm thick concete handrail, 840mm high half brickwall and finished all exposed surfaces with 20mm thick plastering and necessary painting as per S.O instruction and drawing No. HQA(98)4511B017 & B018

Prepare and apply one coat approved alkali resisting primer sealer and two coats emulsion paint as specified


KUARTERS KELAS F


NO

SUPERSTRUCTURE/EXTERNAL WALL AND BALUSTRADING

(ALL PROVISIONAL)=================================================

KUARTERS KELAS F================

BRICKLAYER & BLOCKLAYER=======================

Brickwall

a Half brickwall MS 864

b Half brick railing MS 148

SUNDRIES

c 113mm wide horizontal MS 96

Bonding ties as specified

d NO 1152

Precast concrete hollow block

e NO 59

TOTAL CARRIED TO SUMMARY :

Brickwork in common bricks in cement and sand (1:6) mortar with and approved plasticiser, reinforced with and including 64mm wide x 22 gauge approved expanded metal reinforcement at every course as specified

Bituminous sheet damp proof course as specified (measures nett - no allowance for laps)

6mm Diameter mild steel wall bonding ties, 450mm long, one end cast into concrete and the other end built into joints of brickwall as work proceeds.

800mm x 800mm precast concrete hollow block as per drawing no. HQA (98)4511B009, B010 & B018


KUARTERS KELAS F


NO

====================================================


CONCRETOR============

PLAIN IN-SITU CONCRETE WORK

Concrete Grade 20 as specified

a MS 114

PRECAST CONCRETE WORKS

WINDOWS AND VENTS

Precast Concrete Lintol

b MR 38

c MR 176

EXTERNAL DOORS


d MR 140

e NO 50


SUPERSTRUCTURE/WINDOWS, VENTS AND EXTERNAL DOORS (ALL PROVISIONAL)

100mm (average) thick cornice render concrete including forming 200mm wide x 100mm deep to wall

100mm x 100mm Precast concrete Grade 20 as specified lintol, reinforced with and including 2 nos. 10mm diameter mild steel bar reinforcement and formwork.



100mm x 100mm x 100mm high heelstone reinforced with and including 10mm diameter mild steel dowel bar, 300mm long, moulded to profile of door frame, fixed to and including forming 10mm diameter x 50mm deep mortice in timber frame


KUARTERS KELAS F


NOCARPENTER AND JOINER====================

WINDOWS AND VENTS

Metal Works

a 68mm x 150mm zincannel MR 90

b 98mm x 150mm zincannel MR 32

Mild steel as specified

c Overall size 1800mm wide x 100mm high (Type T4) No 16

d Overall size 1800mm wide x 1200mm high (Type T1) NO 16

e Overall size 600mm wide x 1200mm high (Type T3) NO 24

f Overall size 1200mm wide x 1200mm high (Type T2) NO 32


Supply and fixed metal window frame including all necessary fixing accessories to brickwall or column, all according to manufacturer's detail and specification as per drawing No. HQA (98) 4511B040

Supply and fix the following natural anodised aluminium adjustable louvred window with and including louvred blades, framing and fixing all (measured separately) in accordance with the manufacturer's instruction completed as per drawing No. HQA (98) 4511B040

Supply and install aluminium casement window, glazed with and including 5mm thick clear sheet glass and glazing bead (measured separately) or approved equivalent including all fixing lugs completed in accordance to manufacturer's instruction as per drawing No. HQA (98) 4511B040

Supply and install aluminium casement window, glazed wih and including 6mm thick clear sheet glass and glazing bead (measured separately) or approved equivalent including all fixing lugs complete in accordance to manufacturer's instruction as per drawing No. HQA (98) 4511B040


KUARTERS KELAS F


NO

WINDOWS AND VENTS ( Cont'd )

a Overall size 600mm wide x 600m high (Type LU2) NO 16

b Overall size 1200mm wide x 600mm high (Type LU1) NO 8

c

d Overall size 2000mm x 1400mm (Type T1) NO 16

e Overall size 800mm x 1400mm (Type T3) NO 24

f Overall size 1400mm x 1400mm (Type T2) NO 32

EXTERNAL DOORS

g NO 1

h Type P2, overall size 1500mm x 2100mm High NO 8


Supply and install aluminium top hung window, glazed with and including 6mm thick clear sheet glass and glazing bead (measured separately) or approved equivalent including all fixing lugs completed in accordance to manufacturer's instruction as per drawing No. HQA (98) 4511B040

Grille completed with "Griloc System" constructed of 25mm x 25mm hollow section at 150mm centres horizontally and vertically, all welded together including fixing to brickwall all as per drawing no. HQA (98)A4511B060

Grille constructed of 25mm x 25mm hollow section at 150mm centres horizontally and vertically, all welded together including fixing to brickwall all as per drawing no. HQA (98) A4511B060

Pair 40mm thick skeleton flush door overall size 1200mm x 2100mm high, constructed of 75mm x 30mm top rail, intermediate rails, bottom rail and stiles, covered with 5mm thick plywood on both sides and lipped all round with 40mm x 12mm thick timber edging and hanging on butt hinges (measured separately) as per drawing No. HQA(98) 4511B043 (Type P7)

Pair 38mm thick pannelled door open in nine panels, infilled with and including 25mm thick "Nyatoh" timber panels, 150mm x 50mm decorative beading with rebated meeting styles and hung on butt hinges (measured separately) completed as per drawing No. HQA (98) 4511B043


KUARTERS KELAS F


NO

WINDOWS AND VENTS ( Cont'd )

a NO 16

Aluminium Door Frame

b Type P1, Overall size 2000mm x 2100mm high NO 8


c Overall size 2200mm x 2200mm high (Type P1) NO 8

d Overall size 1700mm x 2200mm high (Type P2) NO 8

METAL WORK

e 150mm x 68mm size frame MR 127


40mm Thick fixed ram timber door, ovrall size comprising of 75mm x 30mm top rail, intermediate rails, bottom rail and styles, covered both sides with 5mm thick plywood and lipped all round with 40mm x 12mm edging including 13mm thick fixed ram timber and hung on butt hinges (measured separately) as per darawing No. HQA(98) 4511B043 (Type P4)

Approved aluminium sliding door frame, fabricated from extruded section, glazed with and including 6mm thick clear glass panel, requisite weather strips and fixing lugs including painting complete as per drawing No. HQA (98) 4511B043

Grille with fixed and sliding panel constructed of 25mm x 25mm hollow section at 150mm centres horizontally and vertically, all welded together including fixing to brickwall all as per drawing no. HQA (98) 4511B060

Grille with double swing construced of 25mm x 25mm hollow section at 150mm centres horizontally and vertically, all welded together including fixing to brickwall all as per drawing no. HQA (98) 4511B060

Supply and fix "Zinccanned/Galvanneal" metal door frame including all necessary fixing accessories to brickwall or column, all according to manufacturer's detail and specification as per drawing No. HQA (98) 4511B043


KUARTERS KELAS F


NO

IRONMONGER

=============

External Doors

a "NARA" or approved equivalent 102mm x 76mm x 2mm S/HINGE NO 88

b "NARA" or approved equivalent 127mm x 89mm x 3mm S/HINGE NO 24

c "NARA" or approved equivalent 150mm & 300mm S/S FLUSH BOLT NO 16

d NARA or approved equivalent HL-4000B-ENT-SS-70MM ENTRANCE LOCK NO 16

e NARA or approved equivalent REBATED PART NO 16

f NARA or approved equivalent HL-530-SGL-SS-60MM DEABOLT NO 32

g ROBA or approved equivalent 12.04/102/ALUM D-HANDLE NO 32

PAINTER========

Window and Vents

h General surfaces of weldmesh (measured flat overall) externally MS 117

j Surfaces exceeding 100mm but not exceeding 200mm girth MR 122

k Surfaces exceeding 200mm but not exceeding 300mm girth MR 122

m General surface of grille (measured flat overall) MS 134


SUPPLY AND FIX THE FOLLOWING IRONMONGERY INCLUDING PROVIDING REQUISITE MATCHING SCREWS AS SPECIFIED COMPLETE AS PER DRAWING NO. HQA (98) 4511B047

Prepare and apply zinc chromate primer and two coats aluminium paints as specified

Prepare and apply one coat metallic primer, one undercoat and two coats gloss enamel paint as specification on surface of metal work


KUARTERS KELAS F


NO

External Doors

a On timber flush door. MS 3

b On timber fixed ram door. MS 18

c On timber panelled door. MS 3

d Surfaces exceeding 100mm but not exceeding 200mm girth MR 176

e Surfaces exceeding 200mm but not exceeding 300mm girth MR 176

f General surfaces of grille (measured falt overall) MS 69

GLAZIER=======

Window And Vents

Clear sheet glass as specified

g MR 173

h MS 62

External Doors

Clear Sheet glass as specified

j 6mm thick glass and glazing to aluminium sliding door (measured separately) MS 34


Knot, prime, stop and paint one undercoat and two finishing coats of gloss enamel paint as specified on woodworks (bloth sides)


Prepare and apply one coat metallic primer, one coat mordant solution and two coats alkaly resin based paint on the following

6mm Thick louvre blade 225mm wide twice splayed and ends housed in including grooves to timber (In Nos 18)

100mm x 100mm wide x 6mm thick clear sheet glass, with grounded and polished edges, fixed to casement aluminium anodised window frame (measured separately) including sunprene gasket completed


KUARTERS KELAS F


NO

COLLECTION

B3/27

B3/28

B3/29

B3/30

B3/31

B3/32




KUARTERS KELAS F


NO

SUPERSTRUCTURE/INTERNAL WALLS (ALL PROVISIONAL)

==================================================

KUARTERS KELAS F=================

BRICKLAYER & BLOCKLAYER=======================

BRICKWALL

a Half brickwall MS 610

SUNDRIES

b 113mm wide horizontal MR 242

c Bonding ties as specified.

d NO 250


Brickwork in common bricks in cement and sand (1:6) mortar with and approved plasticiser, reinforced with and including 64mm wide x 22 gauge approved expanded metal reinforcement at every course as specified

Bituminous sheet damp proof course as specified (measured nett - no allowance for laps)

6mm Diameter mild steel wall bonding ties, 450mm long, one end cast into concrete and the other end built into joints of brickwall as work proceeds.


KUARTERS KELAS F


NO

SUPERSTRUCTURE/INTERNAL DOORS (ALL PROVISIONAL)

=================================================


CONCRETOR==========

PRECAST CONCRETE WORKS

INTERNAL DOOR


a MR 144

b NO 80

INTERNAL DOORS

No 40

c

d NO 8


150mm x 150mm Precast concrete Grade 20 as specified lintol, reiforced with and including 2 nos. 10mm diameter mild steel bar reiforcement and formwork.

100mm x 100mm x 150mm high heelstone reinforced with and including 10mm diameter mild steel dowel bar, 300mm long, moulded to profile of door frame, fixed to and including forming 10mm diameter x 50mm deep mortice in timber frame

Sawn pressure treated Group "B" timber as specified unless otherwise described

40mm thick skeleton flush door overall size 900mm x 2100mm high, constructed of 75mm x 30mm top rail, intermediate rails, bottom rail and stiles, covered with 5mm thick plywood on both sides and lipped all round with 40mm x 12mm thick timber edging and hanging on butt hinges (measured separately) as per drawing No. HQA(98) 4511B043-045 (Type P3)

Pair 40mm Thick skeleton flush door overall size 900mm x 2100mm high, constructed of 75mm x 30mm top rail, intermediate rails, bottom rail and stiles, covered with 5mm thick plywood on both sides and lipped all round with 40mm x 12mm thick timber edging and hanging on butt hinges (measured separately) as per drawing No. HQA(98) 4511B043 (Type P6)


KUARTERS KELAS F


NO

a NO 24


b Overall size 1000mm x 2200mm high (Type P3) NO 8

METAL WORK

c 150mm x 68mm size frame MR 366

IRONMONGER==========

Internal Doors

d NARA' or approved equivalent 102mm x 76mm x 2mm NYLON RING HINGE NO 38

e 'NARA' or approved equivalent 102mm x 76mm x 2mm S/HINGE NO 84

f 'NARA' or approved equivalent 150mm & 300mm S/S FLUSH BOLT NO 8


Supply and fix the following PVC door to approved manufacturer's detail (ironmongery measured separately)

PVC door ovarall size 850mm x 2100mm high hanging on butt hinges (measured separately) (Type P5)

Grille with double swing constructed of 25mm x 25mm hollow section at 150mm centres horizontally and vertically, all welded togerther including fixing to brickwall all as per drawing no. HQA(98) 4511B060

Supply and fix 'Zincanned/Galvanneal' metal door frame including all necessary fixing accessories to brickwall or column, all according to manufacturer's detail and specification as per drawing No. HQA(98) 4511B043

SUPPLY AND FIX THE FOLLOWING IRONMONGERY INCLUDING PROVIDING REQUISITE MATCHING SCREWS AS SPECIFIED COMPLETE AS PER DRAWING NO.HQA(98) 4511B047


KUARTERS KELAS F


NO

Internal Doors ( cont'd)

a 'NARA' or approved equivalent NR-110 S/S WC INDICATOR BOLT NO 24

b NO 8

c NARA or approved equivalent HL-830B-ENT-SS-60MM ENTRANCE LOCK NO 40

d NARA or approved equivalnet REBATED PART NO 8

PAINTER========

Internal Doors

e On general surface of door. MS 181

f Surfaces exceeding 100mm but not exceeding 200mm girth MR 733

g Surface exceeding 200mm but not exceeding 300mm girth MR 733

hGeneral surfaces of grille (measured falt overall) MS 18


NARA or approved equivalent HL-400B-ENT-SS-70MM ENTRANCE LOCK

Knot, prime and stop with aluminium wood primer and apply one undercoat and two coats gloss enamel paint as specified on both sides.


Prepare and apply one coat metallic primer, one coat mordant solution and two coats alkaly resin based paint on the following


KUARTERS KELAS F


NO

COLLECTION

SUPERSTRUCTURE/INTERNAL DOORS (ALL PROVISIONAL)

B3/35

B3/36

B3/37



KUARTERS KELAS F


NO

EXTERNAL FLOOR FINISHES (ALL PROVISIONAL)

==========================================

KUARTERS KELAS F

================

PAVIOR, PLASTERER AND TILE FIXER================================

Floor Finishes

Cement and sand (1:3) with and approved plasticisier as specified

a 20mm Thick paving, trowelled finish to apron slab MS 55

b 20mm Thick paving, trowelled finish to floor M2 142



KUARTERS KELAS F


NO

INTERNAL FLOOR FINISHES (ALL PROVISIONAL)

==========================================



Floor Finishes

a On concrete floor MS 1001

b On skirting, 100mm high MR 684

c On drop, 50mm high MR 56


200mm x 200mm x 6mm Thick semi - glazed ceramic tiles or approved equivalent as specified, bedded and jointed in cement and sand (1:3) mortar, pointed with white cement on and including 20mm thick cement and sand (1:3) screed with an approved plasticiser


KUARTERS KELAS F


NO

EXTERNAL CEILING FINISHES (ALL PROVISIONAL)

=========================================


CARPENTER AND JOINER======================

CEILING FINISHES

Sawn pressure treated Group 'B' timber as specified

a 100mm x 50mm ceiling joist. MR 98

b 50mm x 50mm Nogging MR 50

Wrot pressure treated Group 'B' timber as specified

1200mm x 600mm x 4.5mm thick cement board

c MS 42

PAINTER=======

Ceiling Finishes

d On cement board ceiling (measured flat across timber beading) MS 42


Ceiling panel set out symmetrically from centre of room and fixing including 13mm x 20mm wrot pressure treated Group 'C' timber beading to ceiling joist



KUARTERS KELAS F


NO

INTERNAL CEILING FINISHES (ALL PROVISIONAL)

========================================


CARPENTER AND JOINER=====================

CEILING FINISHES

Sawn pressure treated Group 'B' timber as specified

a 100mm x 50mm Ceiling joist. MR 145

b 50mm x 50mm Nogging. MR 298

Wrot pressure treated Group 'B' timber as specified

1200mm x 600mm x 6mm thick cement board ceiling

c MS 205

d NO 2


Ceiling Finishes

Cement and sand (1:6)with and approved plasticiser as specified

e 13mm thick to soffit of slab MS 844


Ceiling panel set out symmetrically from centre of room and fixing including 20mm x 13mm wrot pressure treated Group 'C' timber beading to ceiling joist

EXTRA FOR forming 600mm x 600mm access panel in ceiling including all necessary timber framing


KUARTERS KELAS F


NOPAINTER=======

Ceiling Finishes

a On plastered soffit of slab MS 844

b On cement board ceiling (measured flat across timber beading) MS 205




KUARTERS KELAS F


NO

COLLECTION

INTERNAL CEILING FINISHES (ALL PROVISIONAL)

B3/42

B3/43



KUARTERS KELAS F


NO

EXTERNAL WALL FINISHES (ALL PROVISIONAL)

=======================================


PAVIOR, PLASTERER AND TITLE FIXER=================================

Wall Finishes

Cement and sand (1:6) with and approved plasticiser as specified

a MS 864

b EXTRA FOR decorative plastering 450mm x 515mm wide MR 22

c MS 148

PAINTER========

Wall Finishes

d On plastered walls, columns and beams. MS 864

e On plastered wall, beam, column and hollow concrete blocks MS 148


20mm thick, plastering in two coats, trowelled finish on brickwall, columns and beams.

20mm thick plastering in two coats, trowelled finish on brickwall, beam, column and hollow concrete blocks



KUARTERS KELAS F


NO

INTERNAL WALL FINISHES (ALL PROVISIONAL)

========================================


PAVIOR, PLASTERER AND TILE FIXER=================================

Wall Finishes

Cement and sand (1:6) with and approved plasticiser as specified

a MS 2346

b To wall MS 17

c To Wall MS 301

d To wall MS 17

e To wall MS 27


20mm thick, plastering in two coats, trowelled finish on brickwall, columns and beams.

200mm x 200mm x 6mm thick 'Kimgress' Code No. KH 885S101M6G non-slip ceramic tiles or approved equivalent as specified, bedded and jointed in cement and sand (1:3) mortar, pointed with white cement on and including 20mm thick cement and (1:3) screed with an approved plasticiser

200mm x 200mm x 6mm thick ' Kimgress' Code No. KH 88S10 non-slip ceramic tiles or approved equivalent as specified, bedded and jointed in cement and sand (1:3) mortar, pointed with white cement on and including 20mm thick cement and sand (1:3) screed with an approved plasticiser

200mm x 200mm x 6mm thick 'Kimgress' Code No. KH88S101B6G non-slip ceramic tiles or approved equivalent as specified, bedded and jointed in cement and sand (1:3) mortar, pointed with white cement on and including 20mm thick cement and sand (1:3) screed with an approved plasticiser

200mm x 200mm x 7mm thick ' Kimgress' Code No. KH 88S101B5G non-slip ceramic tiles or approved equivalent as specified, bedded and jointed in cement and sand (1:3) mortar, pointed with white cement on and including 20mm thick cement and sand (1:3) screed with an approved plasticiser


KUARTERS KELAS F


NO

a To wall MS 27

b To wall MS 27

PAINTER=======

Wall Finishes

c On plastered walls, columns and beams. MS 2346


200mm x 200mm x 7mm thick ' Kimgress' Code No. KH 88S101M5G non-slip ceramic tiles or approved equivalent as specified, bedded and jointed in cement and sand (1:3) mortar, pointed with white cement on and including 20mm thick cement and sand (1:3) screed with an approved plasticiser

200mm x 200mm x 7mm thick ' Kimgress' Code No. KH 88S101S5G non-slip ceramic tiles or approved equivalent as specified, bedded and jointed in cement and sand (1:3) mortar, pointed with white cement on and including 20mm thick cement and sand (1:3) screed with an approved plasticiser



KUARTERS KELAS F


NO

COLLECTION

INTERNAL WALL FINISHES (ALL PROVISIONAL)

B3/46

B3/47



KUARTERS KELAS F


NO

FITTING AND FURNISHINGS (ALL PROVISIONAL)

========================


CARPENTER AND JOINER=====================

FITTINGS AND FURNITURE

CABINET

a Overall size 1000mmm long x 500mm wide x 2210mm high NO 8

b Overall size 1500mm long x 500mm wide x 2210mm high NO 8

c Overall size 1800mm long x 500mm wide x 2210mm high NO 8

KITCHEN CABINET

d

e High level cabinet overall size 1000mm long x 315mm wide x 600mm high NO 8

f

g Low level cabinet overall size 1325mm long x 530mm wide x 850mm high NO 8


The following in 16mm Medium Density Fibreboard to all sides, top and bottom with laminated Medium Density Fibreboard at the back of cabinet, all frame together with all necessary fittings and approved ironmongery and finished all exposed surface with EO and EI paint and fixed to the wall as specified by manufacturer's all as per drawing no. HQA(98) A4511B028-037

The following in wrot pressure treated grade High timber, unless otherwise specified, all framed together with all necessary fittings and approved ironmongery and finished all exposed woodwork surfaces with two coats of clear varnish and finished metalwork surfaces with one coat metallic primer and three coats of gloss enamel paint as specified and as per drawing No. HQA(98) 4511B028-037

The following in wrot pressure treated grade low timber, unless otherwise specified, all framed together with all necessary fittings and approved ironmongery and finished all exposed woodwork surfaces with two coats of clear varnish and finished metalwork surfaces with one coat metallic primer and three coats of gloss enamel paint as specified and as per drawing No. HQA(98) 4511B028-037


KUARTERS KELAS F


NO

STEEL AND IRON WORKER

=====================

LETTER BOX

Aluminium Letter Box

a

NO 8

Letter Box Base

b NO 8


Size 900mm x 418mm wide x 350mm high overall, constructed with aluminium plate welded, and all detail as per Drawing No. HQA(98) 4511B058-059

90mm thick concrete block constructed in two layer with overall size 778mm long x 400mm wide x 700mm high and finished with 200mm x 20mm x 5mm thick glazed ceramic wall tile including 19mm thick screed in front and both sides of the concrete base


KUARTERS KELAS F


NO

COLLECTION

FITTINGS ANG FURNISHINGS (ALL PROVISIONAL)B3/49

B3/50



KUARTERS KELAS F


NO

SERVICES/SANITARY APPLIANCES

============================================


PLUMBER======

SANITARY APPLIANCES

a

NO 8

b

NO 8

c

NO 8

dNO 8

e

NO 8


Supply and fix the following Sanitary Fittings and accessories, including storing, assembling, bedding, plugging and screwing with matching screws, cutting and pinning or building in brackets, jointing and connecting to services and soil and waste pipes and making good all work disturbed

Johnson Suisse 'ANDERMATT' Squatting water closet in white glazed vitreous china complete with pair of raised foot treads in white fireclay with 'S' or 'P' traps, 40mm diameter flush pipe, 12 litres vitreous china cistern with 12mm diameter plastic ball valve, 20mm diameter over flow, galvanised chain and pull and push button supporting bracket including surrounding pan and foot treads in concrete and jointing to soil pipe

510mm x 315mm 'DOVER' Johnson Suisse wash hand basin white glazed vitreous china complete with 13mm diameter chromium plated pillar tap, one 15mm diameter chromium plated trap, one blank tap hole stopper, 30mm 'P' or 'S' with 40mm seal, waste fitting with chain and rubber plug and set on pair of painted cast iron brackets plugged and screwed to tiled brickwall including jointing outlet to waste pipe

420mm x 130mm x 65mm 'Sime Inax' H402 ceramic shelf for wash hand basin (measured separately) or approved equivalent and fixing as per manufacturer's instructions into tiled brickwall

150mm x 150mm x 65mm vitreous china semi recessed soap dish or approved equivalent including build into tiled brickwall

500mm x 450mm Bevelled edges polished plate glass mirror 6mm thick waterproof plywood backing four times drilled for and including chromium plated dome headed fixing screws and rubber washers to wall


KUARTERS KELAS F


NO

a

NO 8

bNO 32

c

NO 8

d

NO 8


1000mm x 600mm ' DIETHLAM' stainless steel sink with single bowl and 'DELUXE' 21/42 single drainer, one 12mm diameter chromium plated 'Sime Inax' EC 123 CR swan neck pillar tap, 37mm diameter chroromium plated waste outlet with rubber plug and chromium plated chain, 31mm diameter plastic bottle trap with 40mm deep seal and setting in concrete worktop (measured separately)

150mm x 150mm stainless steel floor trap complete with 115mm diameter openable stainless steel grating including into floor slab

100mm diameter shower rose and arm with swivel joint complete with 13mm diameter stop valve or approved aquivalent and other accessories including fixing to pipe and building into tiled brickwall

600mm long 'Sime Inax' towel rail or approved equivalent in stainless steel complete with 255mm x 75mm handle including building into tiled brickwall


KUARTERS KELAS F


NO

COLLECTION

SERVICES/SANITARY APPLIANCES (ALL PROVISIONAL)

B3/52

B3/53



KUARTERS KELAS F


NO

SERVICES/PLUMBING INSTALLATION (ALL PROVISIONAL)

===============================================


PLUMBER=======

COLD WATER INSTALLATION

a LS

Meter Strorage Tank

b NO 1

c NO 1


Supply and services pipes including all necessary connections with requisite connectors to water tank storage and sanitary appliance with requisite pipe fittings and stopcock

Acrylonitrile Butadiene Streyene (ABS) to B.S.5391 and B.S. 5392 or equivalent pipes and including all requisite fittings, from and including first stopcock from incoming mains to water storage tank to sanitary appliance and overflow pipes from water storage tank including Water storage tank all as per drawing No. MEK/C/PIR/6-2008/1-4, to 4-4 and MEK/C/PIR/1-2008/6-6

FRP' water tank, overall size 2000mm x 4000mm x 2000mm high (3520 Gallon) complete with one external and one internal aluminium cat ladder, 610mm x 610mm access opening complete with cover, 65mm diameter galvanised iron ventilation complete with mosquito proof wire dome, 100mm diameter overflow and drain pipe discharge to the nearest rain water down pipe, 25mm diameter galvanised iron warning pipe and 50mm diameter high pressure equilibrium ball valve with blown copper ball float including all requisite corner plate, stiffeners, bolt and nuts, washer tank connectors, hoisting and placing in position at approximately 1340mm above ground level on the 700mm high reiforced concrete beam

Allow cost for conneting 50mm diameter galvanised iron tubing as specified to main supply pipe


KUARTERS KELAS F


NO

WASTE WATER, SOIL AND VENT PIPE

UPVC pipe B.S. 4660

a

LS

TESTING

Sanitary Fittings and Plumbing Installation

d item


Waste water, soil and vent pipes with and including all requisite fittings from sanitary appliances and from floor traps and outlet gratings to connecting manhole or water channel drains including all necessary excavations, concrete casing around pipe work,connections with requisite connectors to sanitary appliances, requisite openings, requisite to chases, in roofs, floors, walls and beams complete all as per drawing No. MEK/C/PSP/6-2008/1-3 to 3-3

On completion of the plumbing installation test all apparatus, piping and fittings, make good any defects and leave the whole in perfect working order to the entire satisfaction of the Superintending Officer.


KUARTERS KELAS F


NOCOLLECTION

SERVICES/PLUMBING INSTALLATION (ALL PROVISIONAL)

B3/55

B3/56



KUARTERS KELAS F


NO

BILL SUMMARY

SUBSTRUCTURE/PILING ( ALL PROVISIONAL) B3/3

B3/7

B3/11

SUPERSTRUCTURE/FRAME (ALL PROVISIONAL) B3/15

SUPERSTRUCTURE/UPPER FLOOR (ALL PROVISIONAL) B3/16

SUPERSTRUCTURE/ROOF (ALL PROVISIONAL) B3/21

SUPERSTRUCTURE/STAIRS (ALL PROVISIONAL) B3/25

B3/26

B3/33

SUPERSTRUCTURE/INTERNAL WALLS (ALL PROVISIONAL) B3/34

SUPERSTRUCTURE/INTERNAL DOORS (ALL PROVISIONAL) B3/38

EXTERNAL FLOOR FINISHES (ALL PROVISIONAL) B3/39

INTERNAL FLOOR FINISHES (ALL PROVISIONAL) B3/40

EXTERNAL CEILING FINISHES (ALL PROVISIONAL) B3/41

INTERNAL CEILING FINISHES (ALL PROVISIONAL) B3/44

EXTERNAL WALL FINISHES (ALL PROVISIONAL) B3/45

INTERNAL WALL FINISHES (ALL PROVISIONAL) B3/48

FITTINGS AND FURNISHINGS (ALL PROVISIONAL) B3/51

SERVICES/SANITARY APPLIANCES (ALL PROVISIONAL) B3/54

SERVICES/PLUMBING INSTALLATION (ALL PROVISIONAL) B3/57

SUBSTRUCTURE/WORK BELOW LOWEST FLOOR FINISH ( ALL PROVISIONAL)

SUBSTRUCTURE/APRON, RAMP AND PERIMETER DRAIN (ALL PROVISIONAL)

SUPERSTRUCTURE/EXTERNAL WALL AND BALUSTRADING (ALL PROVISIONAL)



KUARTERS KELAS F

AMOUNTRM/CENT

bq kelas f-arki

Documents

Transcript of bq kelas f-arki