Detailed Estimate for the work of repairing and furnishing work of JSKVIB emporium at Riada Bhawan Ranchi.

No. Descrition of items Qunty Rate Amount 1/12.52.1dsr

FALSE CEILING WORK - Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped gaivanized steel sections (galvanized@120 grams/sqm, both side inclusive) consisting of main ‘T’ runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main”T” runners to be suspended from celling suing GI slotted cleas of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-Sections shall be pre-painted with polyesterpaint, all complete for all heights as per specifications, drawings and as directed by Engineer in charge.

2/5.4.6dsr

COUNTER AND HANGERS Supplying fitting and fixing 38mm, rectangular lowheight Table thick good quality will dressed and well seasoned sal wood battened shutters ledged and braced in shutter and drawers with steel fitting such as hinges, sliding door, bolts, tower bolts, handles or rings, hooks and eyes cleats, sand blocks as per schedule taxes and royalty all complete as per building specification and direction of E/I. Supplying fitting and fixing 32 mm thick do-do. 7. Structural analysis & design and preparation of shop drawings for pressure equalization or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.

3/8.30.2dsr+8.26.3dsr

WOODEN RACK WITH MDF CARVING AND GLASS WORK -Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS:1328 (Type-1) , for plain lining/cladding with necessary screws, including priming coat on unexposed surface with face MDF carving work with frosted glass with all necessary Hardware and fittings. :Decorative veneer facing of approved manufacture. Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade-1, Type II, IS:12823 marked with necessary fixing arrangements and screws, including drilling necessary holes for raw plugs etc, and priming coat on un-exposed surface complee. Providing and fixing in wall lining flat pressed three layer (medium density)particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, TYPE II, IS:12823 marked including primining coat on un-exposed arrangement and screws etc. complete:

4/5.8.21j

sr

PAINTING WORK - Providing and erecting of painting work with Berger or asian co. as per area with two costs of cement primers and leveling of wall with whiting and then final three coats of paints.

5/9.16.1dsr+9.20.1dsr

SOLID DOORS FOR TRAIL ROOM- Supply and fixing in position 37mm thick door shutter made of 15mm thick well seasoned wood with all necessary Hardware and fittings. Second class teak wood including ISI marked nickel plated bright finished M.S. Piano hinges with necessary screws. 35 mm thick including ISI marked stainless steel butt hinges with necessary screws. Decorative plywood one side decorative veneer and

[Type text]

+9.7.3.2d

sr

commercial veneer on other face (Type1) conforming to IS 1328 BWR Type.

6/9.7.1dsr+9.7.3.2dsr+9.6.1dsr

FULL HEIGHT SOLID PARTITION FOR TRAIL ROOM -Providing and fixing paneling or paneling both side for partition and glazing in paneled or paneled and glazed and clerestory (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 mm and 40 mm thick. Second class teak wood.Decorative plywood one side decorative veneer and commercial venner on other face (Type 1) conforming to IS 1328 BWR Type. 12 mm thick plain grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS:3087 marked, bonded with BWP type synthetic resin adhesive as per IS:848:

7/26.1dsr

WOODEN FLOORING -Providing & fixing in position Phenol bonded Bamboo wood flooring with planks of sizes 14 mm thick, 1800 mm length (minimum) and 130 mm wide (minimum) in approved colour, texture and finish having performance Appraisal certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4 mm thick expanded polyethylene foam sheets having density 40 Kg./Cum, over prepared surface with necessary quarter round planks of size 1900 mm x18 mm and door reducer of size 1900 mm x 44 mm, wherever required. The bamboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. With Eco friendly UV coating all complete as per direction of the Engineer-in-charge.

8/25.3dsr+10.30.2dsr+26.6e.1d

sr

SIDE WALL AREA WITH DESIGNING PANELLING & GLASS SELF WORK- Providing and fixing at all height wall paneling with phenol bonded Bamboo Mat board conforming to IS: 13958-1994 including providing and fixing to frame work made of 50 mm x 50 mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of paneling etc. with iron screws all complete as per direction of Engineer-in-charge. Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12-8 MM insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6 mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthened clear float glass 6 mm thick, spacer tube 12 mm wide, dessicants, including primary seal and secondary seal (structural silicon sealant) etc. all complete for the required performances as per the Architectural drawings as per the approved shop drawings, as specified and as directed by the Engineer-in-charge. The IGUs shall be assembled in the factory/worshop of the glass processor. Providing & Fixing glass panes with putty and glazing clips in steel doors, windows, clearstory window all complete

9/26.3+26.42+26.47+8.32d

sr

SIGN AGE BOARD WORK WITH 3D VIEW - Providing & Fixing in position phenol bonded Bamboo wood wall cladding atall height with planks of sizes 10 mm thick, 1800 mm length (minimum) and 130 mm wide (minimum) in approved colour, texture and finish Providing and fixing of external wall system on Light gauge steel frame work with. Outer face having 6 mm thick heavy duty fiber cement board fixed on 9 mm thick heavy duty Providing and fixing in position, 230 mm thick factory made Expanded Polystrene Core (EPS Core) roof/floor panels made of 3 mm dia G.I. wire mesh with 50 mm pitch in both the directions and on both faces of panel,Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched

[Type text]

between two Aluminium sheets (each 0.5 mm thick) with all necessary Hardware and fittings.

10/9.18.2dsr+9.41.1+9.134.1+10.3dsr

CASH COUNTER- Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS:3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked , in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately), including fixing complete with : With ISI marked M.S. pressed butt hinges bright finished of required size.Providing and fixing in position shutters with vertical channels and braced with flat , with top and bottom rail of T-iron complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of approved adasive.

11 Electrical work 1.3 Point Wiring in PVC Conduit, with Modular type Switch: Wiring for

light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.

B1.3.3

one point holder points

C Two point holder Points D socket cluster wiring Points

E2.12.1

S/F "C" Series MCB 6/32 Amp Each

F1.24.7

Lighting fitting

G S/F Recessed Mounting Led panel light with high Quality and high efficiency cat no LED PNMTR 30 CW ( Make HPL Philips Hevells) Each

H2.80

Signage light points Each

I2.8.8

S/F SP MCB DB: Supplying and fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (Without Set MCB/RCCB/ISOLATOR).

J1.14.2

63 Amps Each

K1.21.1

63 A pose load Each

L S/F 400 mm wall mounted fan ( make Havells, Bajaj) Each M Tray light fitting 28 watt tube. Each D.S.R AMOUNT J.S.R AMOUNT(INCLUSIVE OF G.S.T) L.CESS 1% AMOUNT SAY