billion5102
-
Upload
salwa-magfhira-jumardin -
Category
Documents
-
view
212 -
download
0
Transcript of billion5102
![Page 1: billion5102](https://reader036.fdocuments.net/reader036/viewer/2022083121/577d2c341a28ab4e1eab9b6f/html5/thumbnails/1.jpg)
8/7/2019 billion5102
http://slidepdf.com/reader/full/billion5102 1/2
Billion 5102 ModemConfi uration Guide
To Begin..
If you have not used ADSL on this computer before, please start here. If you have usedADSL with another provider, and have transferred to People Telecom, please start from
Step 3.
Step 1 – Installing EquipmentWe need to perform the physical installation of the ADSL modem.
1) Plug in all equipment as directed on the booklet that came with your modem.
2) A phone cable should plug into the ADSL modem.
3) An Ethernet cable should go from the ADSL modem, to the PC.
4) All telephones, fax machines and answering machines on that phone number should
have ‘line filters’ installed.
Step 2 – Configuring your Computer
If you already had ADSL with another ISP, you can skip this step and go straight to step 3.This section details on how you need to configure your PC to connect to your modem, and
therefore the internet. This guide details using Windows XP.
1) Press Start, and then ‘Settings’ and then ‘Control Panel’
2) Select the ‘Network and Internet connections’ option
3) Select the ‘Network connections’ option
4) Locate your ‘Local Area Connection’ and then right click on the icon. Select‘Properties’
5) In the white space, there is an item called ‘Internet Protocol (TCP/IP)’. Click it, and
then press properties.
6) Details on this page need to be set to ‘Obtain IP address Automatically’ and also
‘Obtain DNS server address Automatically’
7) Press ‘Ok’ and then ‘Close’
If you require further assistance in configuring your ADSL modem, please contact the modem manufacturer.Billion Technical Support – 1300 139 159
![Page 2: billion5102](https://reader036.fdocuments.net/reader036/viewer/2022083121/577d2c341a28ab4e1eab9b6f/html5/thumbnails/2.jpg)
8/7/2019 billion5102
http://slidepdf.com/reader/full/billion5102 2/2
Step 3 – Configure your ADSL Modem
Next, we need to configure the modem to connect to People Telecom. To do so, please followthese steps.
1) Open up internet explorer
2) In the address bar, please type in http://192.168.1.254
3) The default username to login to the modem is ‘admin’ and the password is ‘admin’
4) On the left-hand side, there is an option for ‘Wizard Setup’. Please click this link.
5) On the first page of the Wizard you will need to set the following settings and then
press ‘Next’.
Mode: Routing
Encapsulation: PPPoE
Multiplex: LLC
VPI / VCI: 8 / 35
6) The next page will ask for your Username and Password details. All other details
remain untouched. Once they are entered, press ‘Next’.
Service Name: People Telecom
Username: [email protected]
Password: PWDxxxxxxxxxxT
Replace xxxxxxxxxx with the full phone number of the adsl.
7) The last page will display an overview of your configuration. Press ‘Save settings’
8) On the next page, you have the option to test your connection. Everything should
display as ‘Pass’
Step 4 – Using your Internet connection
Once the above steps have been completed, you should now be able to browse the
internet. Open internet explorer, and access websites.
Further Information / Configuration / AssistanceThis Guide contains all the configuration information specific to People Telecom and its
ADSL network. If you have any further trouble setting up your ADSL modem, you shouldcontact your modem manufacturer – Billion on 1300 139 159.
If you require further assistance in configuring your ADSL modem, please contact the modem manufacturer.Billion Technical Support – 1300 139 159