Bill 3 G - Thermal & Moisture.pdf

7/27/2019 Bill 3 G - Thermal & Moisture.pdf

1/5

GUtech GERMAN UNIVERSITY OF TECHNOLOGY IN OMAN - PHASE 1

MAIN WORKS PACKAGE BILL No. 3 : Main Building

SECTION G : THERMAL & MOISTURE PROTECTION

Unit Amount

Item Description Quantity Unit Rate R.O Bz

The Contractor is referred to the Specifications

and Drawings for all details related to this Section

of the works and he is to include for complying

with all the requirements contained therein

Roof Covering

Roofing system consists of screed laid to falls with

4 mm torch applied membrane water proofing and

100 mm thick insulation finished with white cementtiles on cement mortar bedding over terram sheet

A Screed laid to falls 4350 m2

B Water proofing system 4350 m2

C Vertically, along roof slab / parapet junction

including corner fillet 681 m

D Edge flashing all as shown on External wall details

drg. no. AR.4.D34.003.020.05.00.A.1 681 m

E Terrace paved area as shown in Roof Plan 805 m2

F Allow for water proofing around drainage out lets,

pipes and the like 1 Item

To Collection


GU tech - Main Contract WorksBill 3: Section G: Thermal and Moisture Protection

Date: August 2010 73 Majan Engineering (QS Division)


2/5




Unit Amount



Sub-structure waterproofing

Approved type waterproofing to concrete surfaces

A Laid horizontally and vertically 22,004 m2

Polythene sheet damp proof membrane

B 1000 gauge 10,212 m

Wet area waterproofing

Floor Slab Water proofing system

C Screed in bath room, toilet and Kitchen areas 753 m

D Screed in second floor court yard 416 m

E Screed in amphiteatre area 539 m

F Water proofing laid horizontally to wet floor areas1,708 m

2

G Water proofing laid vertically, along floor / wall

junction including cement sand fillet 1,175 m

To Collection

GU tech - Main Contract Works

Bill 3: Section G: Thermal and Moisture Protection



3/5




Unit Amount



Sundries

A Allow for water proofing to under ground water

tanks with plaster and fibre glass lining to internal

and approved water proofing to external face

1 Item

B Allow for water proofing to roof -top water tanks

with plaster and fibre glass lining to internal 1 Item

To Collection





4/5




Unit Amount



Other Items

Contractor shall list here other items not included

above but included in the specifications and

drawings and necessary for the complete and

satisfactory completion of this section of the works.

Such items shall be deemed to be included unless

specifically listed here

To Collection





5/5




Unit Amount



Collection

Page

73

74

75

76

BILL NO 3

SECTION G - THERMAL & MOISTURE

PROTECTION

CARRIED TO BILL NO. 3 SUMMARY




Bill 3 G - Thermal & Moisture.pdf

Documents

Transcript of Bill 3 G - Thermal & Moisture.pdf