Belt / Disc Sander Safety

Click icon to add picture

Be sure to check the machine for broken or loose parts or bits before starting

Eye protection should be worn at all times.

Only sand with material seated firmly on the table and on the downward left side of the disc

Broken belts and any unusual sound should be immediately reported to the instructor

Do not sand parts less than 4 inches in length or reach across the sander. Injury may occur.

Most sanders can be angled up to 45 degrees. Adjustments to the table should be made with the power off.

Do NOT force the stock against the sander – it may cause the wood to burn!

Remember the two most important safety rules1. Wear safety glasses at all times2. Use common sense. If and operation

seems dangerous or you are unsure of it DON’T DO IT!!!