Belden Infrastructure Solutions Catalogecs.beldenapac.com/uploads/soft/Catalog/Infrastructure...®...

Enclosures and RacksCable ManagementAirflow ManagementEnclosure Power Distribution UnitsMonitoring (Power, Environment, Access)

Belden®

Infrastructure Solutions Catalog

Faster.Easier.Better.

2 www.belden.com1.800.BELDEN.1 (800.235.3361)

Belden — the most trusted brand for reliable

signal transmission solutions — offers a complete

selection of racking, enclosures, power distribution

units, monitoring and airflow management products

to meet your infrastructure needs for optimizing

system performance.

3www.belden.com 1.800.BELDEN.1 (800.235.3361)

Faster.

Easier.

Better.

Today’s Data Center, Broadcast, AV and Security professionals must ensure that their infrastructure is highly available, scalable and flexible, while at the same time control operating expenses. These conflicting objectives have drawn attention to the performance of physical infrastructure elements, including heating and cooling, rack-level power, bandwidth and physical security management — all of which impact infrastructure availability, and therefore, mission critical applications.

Belden understands the issues you face daily — cooling, power, density and security — and can help you capitalize on these opportunities by implementing the right blend of technologies to maximize the efficiency of your enterprise in a manner that complements your system’s performance requirements — today and into the future.

Belden Infrastructure Solutions

Introduction 3–11

Belden Infrastructure Solutions 3

Application Guide for Belden Enclosures 4

Product Summary and Selection Guide 5

Unique Offerings From Belden 6–7

World-Class Enclosures 8

Features and Benefits of Belden Enclosures 9

Customized Racks and Enclosures 10

How to Use the Ordering Matrix 11

Section 1 — Enclosures And Racks 12–47

XM Series — Multi-Media Enclosures 13–15

XS Series — Server Enclosures 16–19

XM and XS Series — Cable Management

and Zero U Patching 20–21

XN Series — Networking

and Switch Enclosures 22–26

Seismic Enclosures 27–30

Heat Containment Systems 31–34

XNM Series — NEMA-12 Enclosures 35–36

C Series Enclosures 37–38

XWM Series— Wall Mount Enclosures 39–40

2- and 4-Post Distribution Rack Systems 41–45

XWR and XWB Series— Wall Mount Racks 46

XSW Series— Swing Racks 47

Section 2 — Broadcast Enclosures

and Racks 48–62

Advantages 49–51

Comparison Chart 51

XSF Series — Slim Frame for Mobile

Broadcast/Telecom Applications 52–53

XMF Series — Media Frame

for Broadcast Applications 54–56

XME Series — Media Enclosure

for Broadcast, Audio Video

and Security Applications 57–59

XMER Series — Media Enclosure

for Broadcast, Audio Video, Security

and Head End Applications 60–62

Section 3 — Components

and Accessories 63–68

Enclosure Shelves 64

Horizontal Cable Management 65

Light Kits 66

Filler Panels 66

Grounding and Bonding 67

Mounting and Adjoining Hardware 67

Enclosure Access Systems 68

Section 4 — Power Distribution

and Climate Monitoring 69–78

Enclosure Power Distribution Units (PDUs) 70–71

Single-Phase Basic/Smart PDUs 72

3-Phase Basic/Smart PDUs 73

Single- and 3-Phase Switched PDUs 74

PDU Accessories — Mounting, Cord

Management and Cord Set 75

PDU Configuration Guide 76

Plug and Receptacle Configuration Chart 77

Environmental Monitors and Sensors 78

Section 5 — Warranty and Shipping Policy 79

Section 6 — Part Number Index 80–82

Belden Rack and Enclosure Manufacturing 83

Customer Service and

other Belden Contacts Back Cover

Table of Contents


Application Guide for Belden Enclosures

Belden has leveraged its engineering and manufacturing expertise to bring you the most reliable cable, connectivity, enclosure and active systems solutions available — with the largest selection of products and the industry’s most trusted technical support and service.

This catalog of Infrastructure Solutions products reflects the same quality and reliability you’ve come to expect from Belden for the housing and storage of data, broadcast, security and other equipment. Engineered for optimal cable routing, ease of

installation and maximum convenience, Belden racks and enclosures have also been designed to match the unique requirements of various industries and applications.

This table will help you select the Belden rack and enclosure family that best suits your specific application. If you need a custom design for a special application, please call us for assistance. Our Cable Management teams have many years of experience in modifying and customizing enclosure designs to suit many different requirements.

Engineered to meet

your specific needs.

Rack or

Enclosure Style

Page

Number

Enterprise

Networking

Data Center/

Telco Broadcast Audio Video Security

Cable TV,

Head End

Harsh

Environment,

Networking

General Purpose,

Retail, Office, K-12,

House of Worship, etc.

XM 13

XS 16

XN 22

XSS/XSN* 27

Passive/Active

Containment31

XNM** 35

C Series 37

XWM 39

XDR 43

XWR/XWB 46

XSW 47

XSF 52

XMF 54

XME 57

XMER 60

PDU 69

* Seismic certified enclosures.

** Production floor networking equipment hosting. = Primary Application

= Secondary Application


Faster.

Easier.

Better.

Product Summary and Selection Guide

Infrastructure

Product Family

Rack or

Enclosure

Style

Page

Number Application Rack Space Width Depth Height

Equipment

Mounting

Free Standing

Modular

Enclosures

XM 13 X-Series Multi-Media Enclosure 42, 45RU 24", 30" 30", 36", 42", 48" 80.4", 85.6" 19"

XS 16 X-Series Server Enclosure 42, 45, 48RU 24", 30" 42", 48" 80.2", 85.4", 90.7" 19"

XN 22 X-Series Networking Enclosure 42, 45, 48RU 30" 42", 48" 78.8", 84", 89.3" 19"

XSS 27 Seismic Server Enclosure 45RU 24", 30" 48" 84" 19"

XSN 27 Seismic Switch/Networking Enclosure 45RU 30", 40" 48" 84" 19"

XNM 35 NEMA 12 Enclosure 45RU 29" 40" 84" 19"

C Series 37 Multi-Purpose Enclosure 42RU 23.6" or 31.5" 42.9", 50.8" 78.3", 83.5" 19"

XSF 52 Mobile Broadcast Enclosure 10–48RU 19.2" 18", 24", 30"20.5" to 87"

(14 height options)19"

XMF 54 Broadcast Enclosures 11–57RU 22" 24", 30", 36", 40"22.3" to 103"


XME 57 Multi-Media Enclosure (fixed sides) 24–44RU 22" 20", 26.5"48.9" to 83.9"


XMER 60 Multi-Media Enclosure (removable sides) 24–44RU 22" 26.5", 31.5", 36"48.9" to 83.9"


Wall Mount

EnclosuresXWM 39 Multi-Purpose Wall Mount Enclosures 9, 12, 20RU 21", 23" 22.9", 27.5" 20.1", 25.3", 39.3" 19"

Distribution

Racks

XDR 41 Distribution Rack — 2 Post 45RU 20.3" 15" 84" 19"

XDRS 41Distribution Rack — 2 Post (steel), Zone 4 Seismic Rated

44RU 24" 15" 84" 19"

BHRR 41 Distribution Rack — 2 Post (aluminum) 45RU 20.3" 15" 84" 19"

XDR 41 Server Rack — 4 Post 45RU 20.3" 40", 44", 48" 84" 19"

XSW 47 Swing Rack 43RU 34.4" 15" 84" 19"

XWR 46 Wall Mount Rack — Swing Out 19, 26RU 19.8" 18" 36", 48" 19"

XWR/XWB 46 Wall Mount Rack — Hinged 2, 4, 6RU 19", 19.5" 4", 9.5" 3.5", 7", 11" 19"

6

Unique Offerings From Belden

Belden End-to-End Infrastructure Solutions

Whether you’re considering Belden racks and enclosures for use in a Data Center, Broadcast Studio, Commercial Enterprise, Industrial Facility or other application, it’s important to look at the big picture. Chances are, you’re managing a dynamic environment with evolving systems, technologies, logical architectures and new business models. You need to ensure that your infrastructure is highly available, scalable and flexible, while at the same time, control your operating expenses.

Manage Conflicting Objectives

These often conflicting objectives focus attention on the performance of physical infrastructure elements, including heating and cooling, rack-level power, bandwidth and physical security management. The challenge is that these elements typically tend to work against each other. For example, as load is increased with high-density active equipment, the system’s power and cooling requirements are increased, and so are energy costs. Because these issues are directly interrelated, complications can arise from each system being manufactured, installed and supported by different vendors. That’s why a systems approach for cost-effectively cooling, managing use of power and optimizing use of available space is critical.

Belden Can Help

We optimize cooling, power and density opportunities because we have expertise in all three areas, offering solutions that effectively deal with all three at the rack/enclosure level.

Belden Offers:

• Airflow, power distribution and power- and climate-monitoring devices that effectively help with high-density computing environments

• High-density racks, enclosures, copper and optical fiber cabling system components and cable management solutions that enable maximum bandwidth and availability in an efficient footprint for better air flow and optimal use of real estate

Advantages of Belden End-to-End

Infrastructure Solutions

• Greater convenience of entire solution from a single source

• Assurance that all components work together

• The most reliable product performance in the industry

• Dependable service and superior support

• The most trusted name in the industry with a large global sales and distribution network

Delivering complete

infrastructure solutions

to maximize efficiencies.

ettertter

Un

Be


Faster.

Easier.

Better.

Data Centers require adequate planning to address equipment hosting, power and thermal management. Once active equipment has been chosen, the next step is to make sure you have the infrastructure to support the availability and performance your active equipment needs to deliver. Belden’s dedicated engineering and manufacturing resources will design, build and deliver enclosures that support and optimize the performance of your selected active equipment. The result is a turnkey solution — from design to roll-out — on the Data Center floor. This service takes 100% of the guesswork out of the design process, making it ideal for Data Center designers, consultants, system integrators, facility planners and managers.

Optimized Integration

• Single-source physical infrastructure solutions designed to work together to support the optimal performance of the selected active equipment

• Pre-configured equipment hosting solution with optimal mix of fiber and copper connectivity, cable managers and power distribution units (PDUs), along with airflow management for heat containment

Reduction of Deployment Time and Cost

• Pre-configured, design-validated and labeled enclosures ready to receive servers or switches at the specific data center location (as per the assigned label)

• Use of best-in-class pre-terminated fiber and copper systems, smart PDUs and active heat containment for fast deployment and reduced labor costs

Streamlined Logistics

• Simplified coordination of all equipment hosting-related tasks — all passive components arrive pre-installed

• Designs can be templated, saved, duplicated and modified for future use

Ease of Standardization

• Single part number ordering for fully configured solution enables easy standardization, specification, ordering and simplified supply-chain hurdles

• Control of deployment methodology across single or multiple sites

Greening of Deployment

• Configured components are pre-installed to specific requirements, eliminating the need for individual packaging, thereby reducing waste disposal of cartons, boxes and plastics

• Consolidated shipping allows efficient packaging and a reduction in the CO2 footprint

Designing the optimal

support environment

for your active equipment.

Contact Belden Today

Belden engineers are ready to work with you to design your Data Center Ready Solution. Contact us now to start the process of delivering the optimal support environment for your active equipment.

Unique Offerings From Belden

Data Center Ready Solutions

Un

Da


World-Class Enclosures

An engineered,

modular approach

enables Belden to meet

your specific needs —

quickly and effectively.

Belden’s broad portfolio of enclosures for hosting servers, switch and networking equipment in Enterprise, Data Center and Broadcast applications is based on proven concepts and products. Each enclosure is built to meet specific application and customer needs. The modular approach and pre-configured capabilities of our enclosures enable fast installation of IT equipment with cable and connectivity management, while providing options for bandwidth scalability, secure features and power and air-flow management.

Key Features and Benefits of structural elements, security components, air flow dynamics and cable and power management are depicted in the value triangle below.

IP-Based Enclosure Air Flow Management

IP-Based Enclosure PDUs

Secure IP-Based Electronic Locks

Air Flow Management to Reduce Energy Consumption

Recyclable Materials

Innovative Packaging and Logistics

Zero U PDU

Zero U Connectivity

Modular and Reconfigurable

Green Scalable

Smart


Faster.

Easier.

Better.

Features and Benefits of Belden Enclosures

Load Capacity

As Data Centers increase in density and bandwidth with blade servers and high port count switches, the need for higher load capacity enclosures is a growing trend. Most Belden enclosures have welded frame construction to accommodate static loads up to 3,000 lbs

To accommodate flexibility in data centers during the initial installation, the enclosures come with casters rated to dynamic loads up to 2,800 lbs

Modularity

A modular enclosure design accommodates frame widths from 22" to 40", heights from 42RU to 52RU and depths from 30" to 48" — all while ensuring cable management, power components and air flow management work seamlessly across the different sizes. This modular approach enables field-upgradable changes to chimney containment systems, PDUs and cable management.

Scalability

With Zero U mounting options, fiber and copper connectivity in the enclosures is scalable to address multiple-generation connectivity needs for servers and switches. Similarly, a broad portfolio of rack PDU offerings, from basic to 3-phase remote switched products, enables enclosures to support power requirements of multiple-generation active IT gear.

Adaptability

A selection of vertical and horizontal cable managers capable of handling a wide range of cable and connectiv-ity density can be accommodated in the enclosures. The doors are field reversible with lift-off hinges.

In addition, the doors, top and bottom panels are configurable based on heat management needs for hot-aisle/cold-aisle configuration or chimney containment.

Environmental and Seismic

Belden’s seismic enclosures are designed to pass Zone 4 Telcordia and/or NEB requirements in seismic zones, thus offering a stable working base for servers and switches. Similarly, the NEMA enclosures can accommodate factory floor or other harsh-environment equipment hosting requirements.

Security and Intelligence

Enclosures can be configured with a key access or smart access system with lock control at the enclosure level or end-of-row POD level.

IP-based air flow management and environmental monitoring-alarming systems and sensors for maximum availability.

Wide selection of smart PDUs with power monitoring and switching options for optimized power management and PUE measurement.


Customized Racks and Enclosures to Meet the Unique Needs of Your Installation

In-House Design, Prototyping

and Manufacturing

Belden’s in-house engineering and state-of-the-art sheet-metal fabrication, powder-coating and silk-screening capabilities enables racks and enclosures production from raw materials to finished goods. This gives unequaled agility to quickly develop — and deliver — technically sound, cost-competitive and compromise-free custom solutions to meet the challenges of your specific project.

Cellular-Based Manufacturing

for Fast, Flexible Service

• Customer communicates project needs, goals and challenges directly to Belden design team

• Customization available for quantities as low as ten enclosures

• Quick-turnaround service — only 4–6 weeks from concept to delivery

Varying Levels of Customization

to Meet Your Needs

• Custom paint color matching and silk-screened logos

• Ability to modify standard enclosure frame sizes

• Complete design/build of project-specific enclosures in steel, aluminum or stainless steel

Unequaled agility to

develop and deliver

compromise-free

custom solutions.

Value Added

Services Typically

Performed for

Customers

• NEMA-style enclosures for industrial networking and outdoor networking applications

• Kitting of racks or enclosures equipped with Belden and/or other manufacturers’ components to enable quick and easy logistics and deployment in applications like retail POS

• Integration of power, cable management, connectivity, cooling and climate monitoring systems into enclosures

• Enclosures designed for heat containment with ducting to support high-bandwidth blade servers and switches

• Rack power distribution unit (PDU) customization for specific numbers of receptacles, single- and three-phase power and special overlays to enhance user experience

• Chimney containment customization to accommodate varying ceiling heights with options of passive or active sensors and fan-based units


Faster.

Easier.

Better.

How to Use the Ordering Matrix


Building a SmartPart Number

There are SmartPart ordering matrixes throughout this catalog that allow you to build part numbers for enclosures, options and accessories to meet your individual specifications. To build a part number, you simply choose from the options listed in the light blue boxes. The example shown below is for an enclosure.

X

Frame Height

RU Description42 80.37"45 83.87"

Color

# Description1 Black2 Central Office White

Frame Style/Size

# Description (W x D)1M 24" x 30"2M 24" x 36"3M 24" x 42"4M 24" x 48"5M 30" x 30"6M 30" x 36"7M 30" x 42"8M 30" x 48"

Mounting Rail Type

# Description1 Square Holes w/6 mm2 10-32 Tapped3 12-24 Tapped

Top Panel Style

# Description0 None1 Solid

2 Solid w/Front-Rear Brush

3 Perforated4 Fan 10.0" w/Brush 5 Heat Containment

Ready w/Brush

Front Door

# Description0 None1 Perforated 2 Split Perforated3 Solid4 Split Solid 5 Glass

Rear Door

# Description0 None1 Perforated2 Split Perforated3 Solid4 Split Solid5 Glass

Side Panels

# Description0 None1 One Side2 Both Sides

Bottom Panel

# Description0 None - Open Bottom1 Solid - No Openings2 Solid with Front

or Rear Brushed Opening

2. Choose your frame height

1. Choose your frame style

3. Choose your color

4. Choose your mounting rail type

5. Choose your top panel style

6. Choose your front door

7. Choose your rear door

8. Choose your side panel(s)

9. Choose your bottom panel

This fixed letter(s) indicates the series of enclosure

4M 45 1 3 4 5 3 2 1

By looking at the part number, you can tell that it's an X Series enclosure that's 24"W x 48"D x 83.87"H (45RU). It's black with 12-24 tapped mounting rails. The top panel has a 10" fan with brush for guiding cables into the enclosure. It also has a glass front door, a solid rear door, side panels on each side and a solid bottom panel with no openings.

X4M451345321Final part number built to your specifications

SECTION ONE

Enclosures and Racks

Enclosures and Racks 12-47

XM Series — Multi-Media Enclosures 13-15

XS Series — Server Enclosures 16-19

XM and XS Series — Cable Management and Zero U Patching 20-21

XN Series — Networking and Switch Enclosures 22-26

Seismic Enclosures 27-30

Heat Containment Systems 31-34

XNM Series — NEMA-12 Enclosures 35-36

C Series Enclosures 37-38

XWM Series — Wall Mount Enclosures 39-40

2- and 4-Post Distribution Rack Systems 41-45

XWR and XWB Series — Wall Mount Racks 46

XSW Series — Swing Racks 47

Table of Contents Page

Specific Solutions for a Wide Array of Applications

As the premier supplier of cable and connectivity systems, Belden has leveraged its networking skills, engineering expertise and end-user experience to provide a broad portfolio of enclosures and racks that meet security, availability and efficiency challenges.

With the X Series (XM, XS, XN), Belden offers an enclosure solution that seamlessly integrates power distribution, airflow containment and management, networking connectivity and cable management to provide optimized hosting conditions for today’s servers and switches. Designed to work seamlessly with Belden’s market-leading fiber and copper connectivity solutions, the X Series vertical and horizontal cable management system supports high cabling/connectivity density, while providing ease of moves, adds and changes.

Shipped fully assembled and configured to exact end-user requirements, the X Series modular design includes a myriad of options for doors, side panels, airflow through passive chimneys or active AEHC units and PDU mounting for easy installation and reconfiguration. Single part number ordering permits ease of standardization and logistics.

Belden XS (Server) and XN (Switch) enclosures reduce Data Center operational costs by:

• Offering a modular and scalable system that adapts to changing requirements for hosting multiple generations of IT equipment

• Enabling seamless heat containment integration for reduced energy consumption

• Providing ganging compatibility for flexible arrangement in distributed, end-of-row or in-row switching environments

Seamlessly integrate

power distribution,

air-flow containment

and management,

networking connectivity

and cable management

into one comprehensive

enclosure solution —

optimizing Data Center

hosting conditions for

servers and switches.


Faster.

Easier.

Better.

En

clo

su

res a

nd

Ra

ck

s

XM Series — Multi-Media EnclosuresValue-minded but versatile and feature-rich

Part No. shown: X2M451300000

(45RU x 24" W x 36" D)

XM Series Type X5M42 X6M42 X7M42 X8M42 X5M45 X6M45 X7M45 X8M45

Dimensions: W x D x H (of Frame) 30" x 30" x 78.62" 30" x 36" x 78.62" 30" x 42" x 78.62" 30" x 48" x 78.62" 30" x 30" x 83.87" 30" x 36" x 83.87" 30" x 42" x 83.87" 30" x 48" x 83.87"

Available Mounting Rack Units (RU) 42RU 45RU

Front Frame Opening (W x H) 27.25" x 73.62" 27.25" x 78.87"

Depth with Doors 32" 38" 44" 50" 32" 38" 44" 50"

Usable Depth (1) 27.75" 33.75" 39.75" 45.75" 27.75" 33.75" 39.75" 45.75"

Single Door Perforated Area 1,330 sq. in. 1,437 sq. in.

Note:

(1) Distance from front-most mounting rail face to inside of rear frame.

XM Series Type X1M42 X2M42 X3M42 X4M42 X1M45 X2M45 X3M45 X4M45

Dimensions: W x D x H (of Frame) 24" x 30" x 78.62" 24" x 36" x 78.62" 24" x 42" x 78.62" 24" x 48" x 78.62" 24" x 30" x 83.87" 24" x 36" x 83.87" 24" x 42" x 83.87" 24" x 48" x 83.87"

Available Mounting Rack Units (RU) 42RU 45RU

Front Frame Opening (W x H) 21.25" x 73.62" 21.25" x 78.87"

Depth with Doors 32" 38" 44" 50" 32" 38" 44" 50"

Usable Depth (1) 27.75" 33.75" 39.75" 45.75" 27.75" 33.75" 39.75" 45.75"

Single Door Perforated Area 938 sq. in. 1,014 sq. in.

30" Wide Enclosures

24" Wide Enclosures

Applications

With multiple enclosure footprints to better suit your space and application needs, the XM Series is ideal for Security, Broadband, Enterprise Networking and Data Center applications. Its basic yet highly functional construction makes for a technically sound and economical enclosure system.

Design and Structural Features

• Perforated Door Mesh Opening: 63%

• Frame Construction: Welded 16 and 14 gauge

• Mounting Rails Construction: 12 gauge, marked RU, RU 1 is at bottom of enclosure

• Static Load Capacity: 2,500 lbs

• Capacity on Casters: 1,080 lbs with regular capacity casters, 2,000 lbs with high-capacity casters

• EIA 310 Compliant: 19" mounting standard with optional 23" mount for 30" wide enclosures

• Vertical Cable Management Options

(See pages 20–21 for X Series Enclosure Accessories)

• Horizontal Cable Management Options

(See page 65 for Accessories)

• Tool-Less PDUs Mounting Options

(See pages 20, 75)

• Heat Containment Options

(See pages 31–34)

• Engineered and made in the USA

80.37" or 83.87"

30", 36", 42" or 48"

24"or 30"


En

clo

su

res a

nd

Ra

ck

s

XM Series — Individual Components Ordering Options

Ordering Matrix for XM Series

Enclosure Frame

No rails, levelers and casters.EIA Mounting Rails

Includes two pair of rails and mounting hardware (50). Default hardware for cage nut style rails is M6. Black only. EIA 23" mount available on custom request for 30" wide enclosure.

XM RLS

Frame Width

24 24"30 30"

Mounting Rail Type

CN6 EIA Rail 6 mm Cage Nut1032 EIA Rail 10-32 Tap1224 EIA Rail 12-24 Tap

Frame Height

42 42RU45 45RU

XM

Frame Depth

30 30"36 36"42 42"48 48"

Frame Width

24 24"30 30"

Color

01 Black02 CO White

Frame Height

42 42RU45 45RU

X7M451315221Part number example:

30"x42"x45RU black frame with casters and levelers, 12-24

tapped rails, solid top panel, glass front door with lock handle,

split perforated rear door with lock handle, two side panels

with lock, solid bottom.

X 7M 45 11 5 23 2 1

Frame Height

RU Description42 80.37"45 83.87"

Color (2)


Frame Style/Size (1)

# Description (W x D)1M 24" x 30"2M 24" x 36"3M 24" x 42"4M 24" x 48"5M 30" x 30"6M 30" x 36"7M 30" x 42"8M 30" x 48"

Mounting Rail Type (3-4)

# Description1 Square Holes w/6 mm2 10-32 tapped3 12-24 tapped

Top Panel Style (5)

# Description0 None1 Solid

2 Solid w/Front-Rear Brush3 Perforated4 Fan 10.0" w/Brush (6)5 Heat Containment Ready

w/Brush (7)

Front Door (8-9)

# Description0 None1 Perforated 2 Split Perforated3 Solid4 Split Solid 5 Glass

Rear Door (8-9)

# Description0 None1 Perforated2 Split Perforated3 Solid4 Split Solid5 Glass6 Fan Doors (13)

Side Panels (10-11)


Bottom Panel (12)

# Description0 None - Open Bottom1 Solid - No Openings2 Solid with Front

or Rear Brushed Opening

Notes:

1) Frame includes casters, levelers, ganging hardware, grounding studs in frame base front/rear.

2) Other colors and silk screening options available for volume orders.

3) Includes 2 pair of 19" mount EIA rails (marked RU, 1 bottom) with mounting hardware (qty = 50). 6 mm hardware standard with square rails.

4) Default front rail position 3.0" from enclosure face and 24" between rails for 30" and 36" deep, 30" between rails for 42" and 48" deep.

5) Custom top panel available for volume orders.

6) Fan top panel included, 10" dia., 550 CFM fan (120V).

7) Heat containment top (42" and 48" deep only) ready to accept passive or active containment chimney.

8) Front and rear doors include latching handle with key lock and bonding strap.

9) Single door swings left to right and is field reversible

10) Side panel includes key lock and bonding strap. Each panel adds 0.63" to enclosure width.

11) Separator panels for use between ganged enclosures (do not add width) are available (refer to component section.)

12) Bottom brush panel can be rotated 180º for choice of front or rear brush entry.

13) For 24"W single door with (4) 7" dia. fans (940 CFM total). For 30"W split doors (8) 7" dia. fans (1880 CFM total).

Style 1 Style 2 Style 3 Style 4 Style 5


Faster.

Easier.

Better.

En

clo

su

res a

nd

Ra

ck

s

XM Series — Options (continued)

Side Panel

with Lock

Front Rail Air Seal Kit

(shown in black)

Top Panel

Style 5 heat containment ready top panel only applicable to 42" and 48" deep enclosure.

Door with Latch Lock Handle

Fan door single piece 940 CFM for 24" wide and split doors; 1880 CFM for 30" wide.

XM D

Frame Height

42 42RU45 45RU

Door Style

P PerforatedSP Split PerforatedS Solid

SS Split SolidG Glass

F Fan Door

Frame Width

24 24"30 30"

Color

01 Black02 CO White

Color

01 Black02 CO White

Color

01 Black02 CO White

Color

01 Black02 CO White

Color

01 Black02 CO White

Color

01 Black02 CO White

XM TP

Top Panel Style

1 Solid2 With Brushed Openings3 Perforated4 With Brush Frame,

w/10" dia. 550 CFM fan5 Heat Containment Ready

w/Brush

Frame Width

24 24"30 30"

Frame Depth

30 30"36 36"42 42"48 48"

XM Series — Accessories

Enclosure Bottom Cover

When panel with brush is selected, will ship with brush in enclosure rear.

XM BC

Frame Width

24 24"30 30"

Frame Depth

30 30"36 36"42 42"48 48"

Cable Access

S SolidWB w/Brush

Side or Separator Panel

Side panel adds 0.63" to width of enclosure. Separator panel does not add width to enclosure.

Front Rail Air Seal Kit

To be used when using passive or active containment chimneys. Rail seal kits are factory installed.

XMSK

Frame Height

42 42RU45 45RU

Frame Width

24 24"30 30"

Front to Rear Cable Manager

Front to rear manager with trough only compatible with 30" wide enclosures.

XMFRM

Frame Depth

30 30"36 36"42 42"48 48"

Manager Style

01 Manager Bar Only02 Manager Bar

w/Trough

XMFS

Cable Manager Fingers

Cable management fingers mount to EIA rails front and/or rear.

Size

01 11RU Section42 42RU45 45RU

XM S

Frame Height

42 42RU45 45RU

Frame Depth

30 30"36 36"

42 42"

48 48"

Side Panel Type

P Side Panel Surface Mount with Lock

SP Separator Panel Flush Mount

Fingers for

Mounting Rails



En

clo

su

res a

nd

Ra

ck

s

XS Series — Server EnclosuresSupports high load capacities and proper air flow management

Containment and Power Distribution

• Complete line up of IP-based power distribution units (PDUs) with available monitoring, alarming and receptacle-level switching

• Enables up to 30kW per enclosure with Belden’s innovative passive and adaptive (AEHC) chimney-based containment systems

80.16", 85.41"

or 90.66"

42" or 48"

24" or 30"

Part No. shown: X3S450000000

(45RU H x 30" W x 48" D)

Construction

• Welded 14-gauge frame and 11-gauge mounting rails support a static load of 3,000 pounds (2,250 pounds with casters) to host a full rack of blade servers

• Rail seal and adaptive containment eliminate hot spots and provide energy efficiency, monitoring and alarming

• Designed and tested for use with Belden Fiber and Copper Networking solutions

Ease of Installation

• Modular design with options on doors, side panels, air flow management, cable management and PDU monitoring, offering ease of installation plus scalability

• Highly integrated and shipped fully assembled with power, air flow, connectivity and cable management

• Optimal physical density and networking bandwidth for ease of moves, adds and changes

Cable and Air-Flow Management

• Open frame design with no center rail support strut maximizes usable space, eases cable routing and supports Zero U connectivity in both 24" and 30" wide designs

• Provides low-resistance airflow through doors featuring 989 square inches of perforated area

• Front rail seals enable physical separation of supply and return air for optimized hot/cold aisle and containment deployment

• 42" and 48" deep versions easily host deep equipment chassis with rear space for power and cable management

• Available in 42, 45 and 48RU for a variety of hosting requirements

Aesthetics

• Designed and manufactured in the USA and fully customizable to meet specific equipment hosting challenges for compromise-free solutions

• Available in Central Office white for improved internal visibility and reduced lighting needs

Part No. shown: X2S451121110 XS Enclosure with optional

Zeru U patch panel (24"W x 48"D x 45RU)


Faster.

Easier.

Better.

En

clo

su

res a

nd

Ra

ck

s

XS Series — Server Enclosures (continued)

XS Series Type X1S42 X1S45 X1S48 X2S42 X2S45 X2S48

Dimensions: W x D x H (of Frame) – Inch 24" x 42" x 80.16" 24" x 42" x 85.41" 24" x 42" x 90.66" 24" x 48" x 80.16" 24" x 48" x 85.41" 24" x 48" x 90.66"

Available Mounting Rack Units (RU) 42 45 48 42 45 48

Front Frame Opening (W x H) – Inch 21" x 73.65" 21" x 78.90" 21" x 84.15" 21" x 73.65" 21" x 78.90" 21" x 84.15"

Depth with Doors – Inch 43.06" 49.06"

Usable Depth (1) – Inch 38.37" 44.37"

Single Door Perforated Area 989 sq. in. 1,062 sq. in. 1,134 sq. in. 989 sq. in. 1,062 sq. in. 1,134 sq. in.

XS Series Type X3S42 X3S45 X3S48 X4S42 X4S45 X4S48

Dimensions: W x D x H (of Frame) – Inch 30" x 42" x 80.16" 30" x 42" x 85.41" 30" x 42" x 90.66" 30" x 48" x 80.16" 30" x 48" x 85.41" 30" x 48" x 90.66"


Front Frame Opening (W x H) – Inch 27" x 73.65" 27" x 78.90" 27" x 84.15" 27" x 73.65" 27" x 78.90" 27" x 84.15"

Depth with Doors – Inch 43.06" 49.06"

Usable Depth (1) – Inch 38.37" 44.37"

Single Door Perforated Area 1,326 sq. in. 1,423 sq. in. 1,520 sq. in. 1,326 sq. in. 1,423 sq. in. 1,520 sq. in.

30" Wide Enclosures

24" Wide Enclosures

Note:


XS Series — Configured Enclosures

Belden will configure enclosures to your exact requirements. The following are commonly requested configured enclosures. Please contact your sales representative to discuss your specific needs.

Item Part #

Frame Size

Color Rails Top Panel

DoorsSide

Panel

Bottom

PanelLacing/PDU Panel

Vertical Mngr.

Width Depth Height Front Rear Fingers

on Rail

Box Style

Mngr.

1 X1S45-C1000 24 42 45RU Black Square Rails Brush Front/Rear Perf. Perf. 1 Solid Open 2 x 3" + 2 x 7" Rear No No2 X2S45-C1000 24 48 45RU Black Square Rails Brush Front/Rear Perf. Perf. 1 Solid Open 2 x 7" Rear Rear Rails No3 X3S45-C1000 30 42 45RU Black Square Rails Brush Front/Rear Perf. Split Perf. 1 Solid Open 2 x 3" + 2 x 7" Rear No No4 X4S45-C1000 30 48 45RU Black Square Rails Brush Front/Rear Perf. Split Perf. 1 Solid Open 2 x 7" Rear No Rear Rails5 X2S45-C1001 24 48 45RU Black Square Rails Brush+Chimney Ready Perf. Solid 1 Solid w/brush 2 x 7" Rear Rear Rails No6 X4S45-C1001 30 48 45RU Black Square Rails Brush+Chimney Ready Perf. Split Solid 1 Solid w/brush 2 x 7" Rear No Rear Rails7 X1S45-C2000 24 42 45RU CO White Square Rails Brush Front/Rear Perf. Perf. 1 Solid Open 2 x 3" + 2 x 7" Rear No No8 X2S45-C2000 24 48 45RU CO White Square Rails Brush Front/Rear Perf. Perf. 1 Solid Open 2 x 7" Rear Rear Rails No9 X3S45-C2000 30 42 45RU CO White Square Rails Brush Front/Rear Perf. Split Perf. 1 Solid Open 2 x 3" + 2 x 7" Rear No No

10 X4S45-C2000 30 48 45RU CO White Square Rails Brush Front/Rear Perf. Split Perf. 1 Solid Open 2 x 7" Rear No Rear Rails11 X2S45-C2001 24 48 45RU CO White Square Rails Brush+Chimney Ready Perf. Solid 1 Solid w/brush 2 x 7" Rear Rear Rails No12 X4S45-C2001 30 48 45RU CO White Square Rails Brush+Chimney Ready Perf. Split Solid 1 Solid w/brush 2 x 7" Rear No Rear Rails

XS Series Specifications

• Perforated Door Mesh Opening: 78%

• Frame Construction: Welded 14 gauge

• Mounting Rails Construction: 11 gauge, marked RU, RU 1 is at bottom of enclosure


• Capacity on Casters: 1,080 lbs with regular capacity casters, 2,250 lbs with high capacity casters

• EIA 310 Compliant: 19" mounting

• Vertical Cable Management Options

(See pages 20–21 for X Series Enclosure Accessories)



• Zero U — Vertical Patch Panel

(See page 21)

• Tool Less PDUs Mounting Options

(See pages 20, 75)


(See pages 31–34)



Ne

two

rk R

ack

s a

nd

En

clo

su

res

En

clo

su

res a

nd

Ra

ck

s

Ordering Matrix for XS Series

XS Series — Individual Components Ordering Options

Top Panel Sections

Small section 5 and 6 only applicable to 48" deep enclosure. No panel required for chimney containment on 24" wide enclosure.


Side or Separator panel mounted (default position) on right side when facing enclosure front. Solid panel as lock, perforated and brushed side panel does not have lock. Panel part # includes bottom and top panels.

X XTP

Top Panel Section

1 Solid2 With Brushed Openings3 With 10" dia. 550 CFM Fan4 With Chimney Opening5 Small Section, Solid6 Small Section, w/Brushed Openings

Frame Width

24 24"30 30"

Frame Height

42 42RU45 45RU

48 48RU

Frame Depth

42 42"48 48"

Side Panel Type

SP Solid PanelSPP Panel w/Rear PerforationSPB Panel w/Front and

Rear Brush

Color

01 Black02 CO White

Color

01 Black02 CO White

X3S451311221Part number example:

30"x42"x45RU, black frame with casters and levelers,

12-24 tapped rails, solid top, perforated front door with

lock handle, split perforated rear door with locking handle,

both side panels with locks, solid bottom.

X 3S 45 11 1 23 2 1

Color (2)


Bottom Panel (13)

# Description0 None - Open Bottom1 Solid - No Openings2 Solid w/Front or Rear

Brushed Opening


# Description1S 24"W x 42"D2S 24"W x 48"D3S 30"W x 42"D4S 30"W x 48"D

Top Panel Style (5)

# Description0 None1 Style 12 Style 23 Style 34 Style 4 (6)5 Style 5 (7)

Rear Door (8-9)

# Description0 None1 Perforated2 Split Perforated3 Solid4 Split Solid5 Fan Doors

Frame Height

# Description42 78.75"45 84.00"48 89.25"


# Description1 Square Holes2 10-32 Tapped3 12-24 Tapped

Front Door (8-9)

# Description0 None1 Perforated2 Split Perforated

Side/Separator Panels (11-12)


Notes:

1) Frame includes levelers, ganging harware, grounding studs in frame base front and rear.


3) Includes 2 pair of 19" mount EIA rails (marked RU, 1 at bottom) with mounting hardware (qty = 50). 6 mm hardware standard with square rails.

4) Default front rail position 3.81" from enclosure face and 30" between front and rear rails.


6) Fan top panel included, 10" dia., 550 CFM fan (120V).

7) Style 5 top ready to accept passive or active containment chimney.


9) Single door swings left to right and is field reversible.

10) For 24"W single door with (4) 7" dia. fans (940 CFM total), For 30"W split doors (8) 7" dia. fans (1880 CFM total).

11) Side/separator panel includes two half-height panels with key lock and bounding strap. Panel does not add width to enclosure.

12) Side/separator panels with brushed or perforated rear available from component selection.




Faster.

Easier.

Better.

En

clo

su

res a

nd

Ra

ck

s

XS Series — Options (continued)

XS Series — Accessories


Front to rear manager with trough only compatible with 30" wide enclosures.

XFRM

Manager Style

01 Front to Rear Manager Bar

02 Front to Rear Trough Kit

Color

01 Black02 CO White

Frame

Depth

42 42"48 48"


When panel with brush is selected, will ship with brush in enclosure rear.

XS BC

Frame

Width

24 24"30 30"

Frame

Depth

42 42"48 48"

Cable

Access

S SolidWB w/Brush

Color

01 Black02 CO White

Bottom Seal Skirt

Front and side skirt allow sealing below enclosures when on levelers.

XS S

Skirt Width

24 24"30 30"42 42"48 48"

Skirt Style

B Bottom FrontS Bottom Side

Color

01 Black02 CO White

Front Rail Air Blocker

Air blocker with brushes, only applicable to 30" wide enclosure.

Frame

Height

42 42RU45 45RU48 48RU

Frame

Width

24 24"30 30"

Accessories

K No BrushKB w/Brush

Color

01 Black02 CO White

XS RS XFS

Finger Strip Kit

Cable management fingers mount to EIA rails front and/or rear.

Frame

Height

42 42RU45 45RU48 48RU

Top Cable Through with Cover

XS TT

Frame Width

24 24"30 30"

Color

01 Black02 CO White

Quantity (for 1 rail)1 Single2 Double

Other Accessories

Description Belden Part Number

Seal Kit Accessories

EIA Rail Seal Brush Kit (3) for 30" Wide Enclosure Air Blocker XSRSBK01

Finger Strips

Finger Strip Single (Qty=1) 11RU Section XFS01

Finger Strip Double (Qty=2) 11RU Section XFS02

Bracket Kit

Corner Mounted PDU Brackets, 2 per Kit (2.0" max PDU width) XSPDUB01

Top Cable Through

with Cover

(8.5" W x 4.0" H)

X

Color

01 Black02 CO White

Frame Style/Size

1S 24"W x 42"D2S 24"W x 48"D3S 30"W x 42"D4S 30"W x 48"D

Frame Height

42 42RU45 45RU48 48RU

Enclosure Frame

Enclosure Frame 24 x 42 x 42U, no mounting rails, no caster, no levelers.

EIA Mounting Rails

Includes two pair of rails and mounting hardware (50). Default hardware for cage nut style rails is M6.

XS RLS

Frame Height

42 42RU45 45RU48 48RU

Frame Width

24 24"30 30"

Mounting Rail Type

CN6 EIA Rail 6 mm Cage Nut1032 EIA Rail 10-32 tap1224 EIA Rail 12-24 tap

Door with Latch Handle

Fan door (F) only applicable to 24" wide. Split fan door (SF) only applicable to 30" wide.

XS D

Color

01 Black02 CO White

Frame Width

24 24"30 30"

Frame Height

42 42RU45 45RU48 48RU

Door Style

P PerforatedSP Split PerforatedS Solid

SS Split SolidF (4) 7" Fans (940 CFM Total)

SF Split (8) 7" Fans (1880 CFM total)

Single Finger

Manager

Double Finger

Manager


En

clo

su

res a

nd

Ra

ck

s

The combination of Belden's extensive cable and connectivity design knowledge and years of interaction with installers and system designers has enabled us to offer:

Belden's XM and XS Series Enclosures — Cable Management and Zero U PatchingBelden's XM and XS Series enclosures and cable management components

were specifically designed for integration with the Belden IBDN copper and

fiber networking system for a true end-to-end solution.

Box and Finger Style Vertical Managers

• Mounts on rail struts for depth adjustability

• Compatible with both 24" and 30" wide enclosures

• Can be used in enclosure front and rear

• Includes doors to hide cables and provide organized look

• Vertical manager can be oriented two different ways to optimize cable routing

Box Style Features:

• 4" wide x 3" deep for 12 sq. in. of cross sectional area

• For low- and medium-density applications

• Oblong opening allows cable routing into the manager

• Low-cost vertical manager option

Finger Style Features:

• 5.5" wide x 3.6" deep for 20 sq. in. of cross sectional area

• For medium- and high-density applications

• Management fingers align with mounting rail RU

• Finger allows for cable support and bend radius control

• Oblong opening allows cable routing into the manager

Features

• A broad selection of modular vertical and horizontal cable managers in configurations that meet your exact requirement for compromise-free hosting

• Flexibility to meet customer needs requiring low to extremely high networking/hosting density

• Modular cable management compontents and enclosures that protect your investment because they can be reconfigured to meet evolving hosting requirements (typical enclosure system will play host to 3–5 generation active equipment)

• Vertical managers that enable ease of moves, adds and changes, making management of your network fast and precise while still allowing you to maintain an organized, consistent look

• A cable management system designed to maintain proper cable bend radius and minimal tension through the use of support fingers, an attachment point for cable bundles and a slack management spool, ensuring maximum bandwidth from your copper and fiber networks

See page 65 for Horizontal Cable Management options.

Vertical Lacing/PDU Mounting Panel*

• Manager panel 7" and 3.5" wide

• Mounts on rail struts for depth adjustability

• Panels can be mounted side by side to create manager surface

• Tool-less PDU mounting

• Lacing of cable bundles

• Attachment of ring managers

• Attachment of slack management spools

• Attachment of quick mount base

*Lacing-PDU mounting panels (p.21 and 75) are not included with the enclosures or the PDU's and need to be ordered separately. PDU's/panels uses tool less "button" style mounting.

Vertical Lacing/PDU

Mounting Panel

3.5" and 7" wide

Lacing Panel

(close-up)

Lacing Panel shown in enclosure

Finger Style Vertical Manager

Box Style

Vertical Manager

Vertical Manager shown in enclosure


Faster.

Easier.

Better.

En

clo

su

res a

nd

Ra

ck

s

XM and XS Series — Accessories


Zero U — Vertical Patch Panel and Connectivity

Vertical Patch Panel (7 positions), Compatible with 24" and 30" Wide XS Enclosures XZUK01

Vertical Patch Panel (14 positions), Compatible with 30" Wide XS Enclosures XZUK02

FXUHD KeyConnect Frame Blank FFZH00BB

FXUHD KeyConnect Frame 6‐Port, Black (Empty) FFZH06KC

FXUHD KeyConnect Frame 8‐Port, Black (Empty) FFZH08KC

10GX KeyConnect Couplers for Vertical Mount Patch Panel, 8‐Port, Black AX105366

CAT6+ KeyConnect Couplers for Vertical Mount Patch Panel, 8‐Port, Black AX105367

Vertical Lacing/PDU Mounting Panel

XVMP

Panel Width

01 3.5"02 7"

Frame Height

42 42RU45 45RU

48 48RU

Color

01 Black02 CO White

Vertical Manager — Box Style

With door.

XVM 01

Frame Height

42 42RU45 45RU

48 48RU

Color

01 Black02 CO White

Vertical Manager — Finger Style

With door.

XVM 02

Frame Height

42 42RU45 45RU

48 48RU

Color

01 Black02 CO White

Lacing/PDU Panel Box Style Finger Style

Belden Zero U - Vertical patch panel allows for optimal use

of mounting space into XS Series enclosures by providing

high-density connectivity options along the equipment

mounting rails.

Vertical Managers:

Other Accessories


Ring Kits

Cable Management Ring Plastic (Qty = 5) 3" x 1.5" Reversible XMR01

Cable Management Ring Kit (Qty = 5) 6.5" Wide x 3" Deep XMR02


Fiber Slack Management Spools 6" deep (includes 2 spools) BHSP020

Fiber Slack Management Spools 2" deep for lacing panels (includes 2 spools) BHSP030

Quick Mount Base (Qty=10) includes Fastener, for 1/4" Holes XTCM01

Velcro Cable Ties, 25 per Roll, 8"L AX100783

Velcro Cable Ties, 25 per Roll, 12"L AX100784

Vertical Ground Bars

Vertical Ground Bar, Insulated, 42RU XVGB0142



Zero U — Vertical Patch Panel and Connectivity

Features

• Attach to mounting rails

• 24" wide enclosure can accept up to four x 7 positions vertical patch panels

• 30" wide enclosure can accept up to four x 14 positions vertical patch panels

• Vertical patch panels are fully compatible with Belden copper and fiber connectivity (FX UHD, FX Ultra Frames and Cassettes)


En

clo

su

res a

nd

Ra

ck

s

XN Series Frame Only

Containment Ready

• Fully compatible with passive or active (AEHC) chimney containment, up to 30kW of hosting capacity

Power Ready

• XN enclosures are ready to host high-end power distribution units from Belden's line up of smart PDUs

XN Series — Networking and Switch EnclosuresDesigned to handle dense patching fields while ensuring proper air flow

Switch Ready

• Switch-specific configuration includes air director for side-to-side venting switches (Ex: Cisco Catalyst 6509, Nexus 7018)

XN Series Type X3N42 X3N45 X3N48 X4N42 X4N45 X4N48

Dimensions: W x D x H (of Frame) 30" x 42" x 80.28" 30" x 42" x 85.53" 30" x 42" x 90.78" 30" x 48" x 80.28" 30" x 48" x 85.53" 30" x 48" x 90.78"


Front Frame Opening (W x H) 19.67" x 73.74" 19.67" x 78.99" 19.67" x 84.24" 19.67" x 73.74" 19.67" x 78.99" 19.67" x 84.24"

Depth with Doors 42" 48"

Usable Depth (1) 27.42" 33.42"

Single Door Perforated Area 1,278 sq. in. 1,375 sq. in. 1,472 sq. in. 1,278 sq. in. 1,375 sq. in. 1,472 sq. in.

30" Wide Enclosures

Note:


80.28", 85.53" or

90.78"

30"

Features

• Modular enclosure designed for networking (cross connect) and switch hosting into Data Centers

• 30" wide enclosure, 42" or 48" deep with 42, 45 and 48 RU height options

• Unique open frame construction allows structural uprights to be positioned inside the frame, resulting in a corner post-free structure, enabling unobstructed access to front and rear vertical managers

• 6" enclosure extension can be mounted on each side of the 30" frame, resulting in a 42" frame for hosting of side-to-side venting switches

• Optional dual swing/handle door for optimized access to right and left cable manager

• Doors feature 78% opened hexagonal mesh for low air resistance and optimal cooling of the hosted gears

• Integrated front and rear finger-style vertical managers

• Modular front-to-rear cable management options

• Vertical (Zero U) patch panel options, for integration of Belden pre-terminated copper and fiber connectivity products

• Front rail air seal and baffle for high level of separation between cold-supply air and hot-return air, ideal for high-density hosting

• Available in black and central office whiteXN Series with 6" end-of-row extension

42" or 48"


Faster.

Easier.

Better.

En

clo

su

res a

nd

Ra

ck

s

XN Series — Networking and Switch Enclosures (continued)

XN Series Specifications

• Frame Construction: Welded 14 and 12 gauge


• Capacity on Casters: 2,250 lbs with high-capacity casters


XN Series — Switch-Ready Configured Enclosures

Belden will configure enclosures to your exact requirements. The following allows seemless hosting of switches from CISCO’s Catalyst and Nexus Series. Please contact your Belden sales representative to discuss your specific needs.

Item Part #Frame Size

Color* Rails Top PanelDoors

Lacing/PDU Panel Air Director Duct 6" Frame Ext.Width Depth Height Front Rear

1 X4N45-C6509101 30 48 45RU Black Square Rails Brush Front/Rear Perf. Split Perf. 2 Rear (1) 6509 None2 X4N45-C6509102 30 48 45RU Black Square Rails Brush+Chimney Ready Perf. Split Solid 2 Rear (1) 6509 None3 X4N45-C6509103 30 48 45RU Black Square Rails Brush Front/Rear Perf. Split Perf. 2 Rear (2) 6509 None4 X4N45-C6509104 30 48 45RU Black Square Rails Brush+Chimney Ready Perf. Split Solid 2 Rear (2) 6509 None5 X4N45-C7009101 42 48 45RU Black Square Rails Brush Front/Rear Perf. Split Perf. 2 Rear 7009 Left/Right Side6 X4N45-C7009102 42 48 45RU Black Square Rails Brush+Chimney Ready Perf. Split Solid 2 Rear 7009 Left/Right Side7 X4N45-C7010101 30 48 45RU Black Square Rails Brush Front/Rear Perf. Split Perf. 2 Rear None None8 X4N45-C7010102 30 48 45RU Black Square Rails Brush+Chimney Ready Perf. Split Solid 2 Rear None None9 X4N45-C7018101 42 48 45RU Black Square Rails Brush Front/Rear Perf. Split Perf. 2 Rear 7018 Left/Right Side

10 X4N45-C7018102 42 48 45RU Black Square Rails Brush+Chimney Ready Perf. Split Solid 2 Rear 7018 Left/Right Side

* For Central Office White color, replace 1 with 2 (ex: X4N45-C7018201).

Notes:Switch-specific configuration includes all enclosure components needed to host given switch.Configuration 3 and 4 allows for hosting of two CISCO Catalyst Series 6509 per enclosure.Mounting Rails Construction: 11 gauge, marked RU, RU 1 is at bottom of enclosure.Power Distribution Units (PDUs) are not included in above configurations; refer to PDUs Section of the catalog (pgs. 69–76) for options.For “chimney-ready” configuration, refer to Containment Section of the catalog (pgs. 31–34) for chimney and accessories options.Bottom panel with rear brushes is included.Side panels (left and right) is included. 6" extension frame includes extension front and rear panels. Solid rear panel for chimney ready enclosures.

Ganged XN frames with end-of-row 6" extension and between enclosure 6" extension (rear view)

6" between enclosure

extension includes front

and rear removeble panels

XN enclosure frames

30"W x 48"D x 45RU

6" end-of-row extension

includes front and rear

removable panels

and side panel

Dual handle/swing door

with 78% mesh opening

and vented frame

PDU mounting provision for

easy integration of Belden

high capacity smart PDUs

Optional air intake/exhaust

duct for hosting of side-

to-side venting switches

Corner-free frame allows

for optimal access to

integrated front and rear

vertical managers


En

clo

su

res a

nd

Ra

ck

s

Ordering Matrix for XN Series

XN Series — Individual Components Ordering Options

Door with Latch Lock Handle

When switching doors out, door adapter comes with door.

XN30 D

Panel Type

P PerforatedPDS Perforated

Dual SwingSP Split Perf.S Solid

SDS Solid Dual Swing

SS Split Solid

Frame Height

42 42RU45 45RU48 48RU

Color

01 Black02 CO White

Side Extension Doors

Side Extension Panel with lock. Includes one panel (can be use front or rear).

XN SXF

Door Style

SD Solid DoorPD Perforated Door

Frame Height

42 42RU45 45RU48 48RU

Color

01 Black02 CO White

Top Panel Sections

Small section 5 and 6 only applicable to 48" deep enclosures. No panel required for chimney containment on enclosure.

X24TP

Color

01 Black02 CO White

Top Panel Section

1 Solid2 With Brushed Openings3 With 10" dia. 550 CFM Fan5 Small Section, Solid6 Small Section, w/Brushed Openings7 With Large Brushed Openings

X 1

Color (2)


1

Right Side Configuration

# Description0 Open Frame1 One Side2 6" Between Enclosure Extension3 6" End-of-Row Extension

1

Bottom Panel (12)

# Description0 None - Open Bottom1 Solid - No Openings2 Solid with Front or

Rear Brushed Opening

3N


# Description3N 30"W x 42"D4N 30"W x 48"D

2

Top Panel Style (5)

# Description0 None1 Style 12 Style 23 Style 34 Style 4 (6)5 Style 5 (7)

2

Rear Door (8-9)

# Description0 None1 Perforated2 Split Perforated3 Solid4 Split Solid5 Dual Swing Perforated6 Dual Swing Solid

45

Frame Height

# Description42 78.75"45 84.00"48 89.25"

3


# Description1 Square Hole w/6 mm2 10-32 Tapped3 12-24 Tapped

5

Front Door (8-9)

# Description0 None1 Perforated2 Split Perforated5 Dual Swing Perforated

3

Left Side Configuration

# Description0 Open Frame1 One Side2 6" Between Enclosure Extension3 6" End-of-Row Extension

2

Baffles

# Description0 None1 Solid2 Brush

Notes:

1) Frame includes casters, levelers, ganging harware, grounding studs in frame base front and rear.


3) Includes 2 pair of 19" mount EIA rails (marked RU, 1 at bottom) with mounting hardware (qty = 50). 6 mm hardware standard with square rails.

4) Default front rail position 3.81" from enclosure face and 30" between front and rear rails.


6) Fan top panel includes 10" dia. 550 CFM fan (120V).

7) Style 5 top panel to accept passive or active containment chimney.


9) Single door swings left to right and is field reversible.

10) Side panel includes two half-height panels with key lock and bounding strap. Panel does not add width to enclosure.

11) Side panels with brushes or perforated rear available from component selection.


X3N45132523121Part number example:

30"x42"x45RU black frame with casters and levelers, 12-24

tapped rails, top panel with rear brush, perforated front door

with dual lock handle, split perforated rear door with lock

handle, 6" end-of-row extension left, side panel on right,

brushed baffles, solid bottom.



Faster.

Easier.

Better.

En

clo

su

res a

nd

Ra

ck

s

XN Series — Options (continued)

Enclosure Frame

No rails, levelers, and casters.

X N

Frame Height

42 42RU45 45RU48 48RU

Frame Depth

3 42"4 48"

Color

01 Black02 CO White

EIA Mounting Rails

Includes two pair of rails and mounting hardware (50). Default hardware for cage nut style rails is M6.

XN 30LRS

Frame Height

42 42RU45 45RU48 48RU

Mounting Rail Type

CN6 6 mm Cage Nut1032 10-32 Tap1224 12-24 Tap

XN Series — Accessories

Horizontal Managers

Horizontal manager waterfall attaches to horizontal manager bar.

Vertical Ground BarsHorizontal Trough Managers

XVGB01

Frame Height

42 42RU45 45RU48 48RU

XNFRM

Style

1 For EnclosureF1 Waterfall

Frame Depth

42 42"48 48"

Color

01 Black02 CO White

XNFRT 1

Frame Depth

42 42"48 48"

Color

01 Black02 CO White

Side Extension Kits with Side Panel

Allows for 6" extension to enclosure, can be used on both sides. Front and rear panel not included.

Between Enclosures Extension Kits

6" extension kits for bolting between two enclosures. Front and rear panel not included.

Vertical Lacing Panel

XN SXF4

Frame Depth

42 42"48 48"

Frame Height

42 42RU45 45RU48 48RU

Color

01 Black02 CO White

XN SXF1

Frame Depth

42 42"48 48"

Color

01 Black02 CO White

XNVLP

Panel Width

1 3.5"2 7.0"

Frame Height

42 42RU45 45RU48 48RU

Color

01 Black02 CO White


When panel with brush is selected, will ship brush in enclosure rear.

XN24 BC

Panel Type

S SolidWB w/Brush

Frame Depth

42 42"48 48"

Color

01 Black02 CO White

Side and Extension Panel

Side panel mounted (default position) on right side facing enclosure front. Panel # includes bottom and top panels, mullion.

XN SP

Frame Height

42 42RU45 45RU48 48RU

Frame Depth

42 42"

48 48"

Side Panel Kit (2)

S w/LockPP w/Rear Perforation w/LockPB w/Front and Rear Brush w/Lock

Color

01 Black02 CO White


Frame Depth

42 42"48 48"


En

clo

su

res a

nd

Ra

ck

s

XN Series — Accessories (continued)

Other Accessories


Front Air Baffle

Air Baffle 45RU X 2.0" Wide, Single, Black XN4530ADS0101

Air Baffle 45RU X 6.25" Wide, Single, Black XN4530ADS0301

Air Baffle with Brush (3) 45RU X 6.25" Wide, Single, Black XN4530ADS0401

Air Baffle 45RU X 2.0" Wide, Single, CO White XN4530ADS0102

Air Baffle 45RU X 6.25" Wide, Single, CO White XN4530ADS0302

Air Baffle with Brush (3) 45RU X 6.25" Wide, Single, CO White XN4530ADS0402

Brush for Front Air Baffle

Brush Kit 3.5"W x 9.75"H (1 per) for Front Air Baffle, Black Frame XNSKB01

Brush Kit 3.5"W x 9.75"H (1 per) for Front Air Baffle, CO White Frame XNSKB02

Finger Managers

Finger Manager Kit Front Face Mount for 1 Rail, 42RU XNFS42



Power Distribution Mounting Brackets

PDU Mounting Bracket Double, Post Mounting 2 PDU Side-by-Side Facing into Enclosure XNPM01

PDU Mounting Bracket Single, Rear Facing Pair XNPM02

PDU Mounting Bracket Rear Facing Pair Between Frames XNPM03

PDU Mounting Bracket Rear Facing Pair Between Frames with Extension XNPM04

Slack Spool Management

Slack Spool Management Plastic 5.0" (Qty = 2) Kit BHSP020

Slack Spool Management Metal 2.5" (Qty = 2) Kit BHSP030

Cable Management Accessories

Cable Management Ring Plastic (Qty = 5) 3" x 1.5" Reversible (22991) XMR01



Quick Mount Base (Qty=10) with Fastener, for 1/4" Holes XCTM

Enclosure Accessories

Casters Kit (4), Regular Capacity 1,080 lbs XCK01

Casters Kit (4), High Capacity 2,250 lbs XCK02

Levelers Kit (4) XLK01

Bolt-Together Kit for X Series Enclosure XBK01

PDU Mounting Bracket

(Single)

Seal Kit for ganged

enclosures

Seal Kit

Seal kit bolt between the front of two 30" frames to allow front-to-rear air separation.

Vertical Door Kit

Mounts between two existing frames with fingers on the post.

XN

Frame Height

42 42RU45 45RU48 48RU

Seal Type

SK Solid Seal KitSKB Seal Kit w/

Brush (3)

Color

01 Black02 CO White

XN DK

Frame Height

42 42RU45 45RU48 48RU

Color

01 Black02 CO White

Vertical Door Kit


Faster.

Easier.

Better.

En

clo

su

res a

nd

Ra

ck

s

XSS Series — Server Enclosure, XSN Series — Networking Switch EnclosureCertified to Seismic Zone 4 for mission-critical Data Centers

Applications

Belden’s seismic enclosures feature a robust steel frame for hosting servers, switches and network components in earthquake zones. Certified to Seismic Zone 4 requirements, these enclosures have passed vibration and shock testing per GR-063-CORE Network Equipment Building System (NEBS) Requirements with no structural damage in a certified lab.


• Welded steel frame construction reinforced with a heavy gauge steel sub-frame for extra rigidity

• Highly perforated doors with stiffener channels ensure sturdiness while reducing risk of equipment damage during seismic events

• Adjustable EIA mounting rails support a 2,000 lb static load under normal operating conditions

• Finger-style vertical managers with brushed cable pass throughs enable front-to-rear routing while maintaining supply-return air sealing properties

• Compatible with passive and active chimney-based containment solutions

• Pre-configured switch enclosures with cable management, air baffles, intake and exhaust duct (for side-to-side venting) and power distribution units (PDUs) to host CISCO Catalyst 6000 and Nexus 7000 Series switches

• Offered in standard colors of black and Central Office white

• Integral anchoring floor mount locations*

*Belden recommends the use of a qualified contractor for the installation of seismic enclosures as per the local, state and federal building code requirements.

XSS and XSN Seismic Series Type X1SS44 X2SS44 X1SN44 X2SN44

Dimensions: W x D x H (of frame) 24" x 48" x 83.75" 30" x 48" x 83.75" 30" x 48" x 83.75" 40" x 48" x 83.75"

Available Mounting Rack Units (RU) 44 44

Front Frame Opening (W x H) 20.00" x 77.50" 25.50" x 77.50" 25.50" x 77.25" 35.50" x 77.25"

Depth with Doors 50" 50"

Usable Depth (1) 46" 46"

Single Door Perforated Area 1,200 sq. in. 1,548 sq. in. 1,548 sq. in. 2,129 sq. in.

Notes:


Engineered and made in the USA.

XSS and XSN Series Seismic Server Specifications

XSS and XSN Series Specifications

• Perforated door mesh opening: 78%

• Frame construction: 16-, 12- and 11-gauge welded steel

• Mounting rail construction: 12-gauge, marked RU, RU 1 is at bottom of enclosure

• Static load capacity: 2,000 lbs

• Static load capacity (seismic): 1,000 lbs

• Capacity on casters: 1,080 lbs (regular capacity), 2,000 lbs (high-capacity)

• Seismic certification: Zone 4 NEBS GR-063-CORE

• EIA 310 compliant: 19" mount equipment




(See pages 31–34)

83.75"

48"

24", 30" or 40"


En

clo

su

res a

nd

Ra

ck

s

Seismic Configured Enclosures

XSS and XSN Series — Configured Enclosures

Item Part #

Frame Size

Color* Rails Top Panel

Doors

Lacing/PDU Panel

Vertical Manager

Width Depth Height Front RearFingers

on Rail

Box Style

Mgr.

1 X1SS-C1001 24 48 44RU Black Square Rails Brush Front/Rear Perf. Perf. 2 x 7" Rear Rear Rails No2 X1SS-C1002 24 48 44RU Black Square Rails Brush+Chimney Ready Perf. Solid 2 x 7" Rear Rear Rails No3 X2SS-C1001 30 48 44RU Black Square Rails Brush Front/Rear Perf. Split Perf. 2 x 7" Rear Rear Rails No4 X2SS-C1002 30 48 44RU Black Square Rails Brush+Chimney Ready Perf. Split Solid 2 x 7" Rear Rear Rails No

Item Part #

Frame Size

Color* Rails Top Panel

DoorsLacing/PDU

Panel

Lacing/PDU

Panel with

(6) Rings

Horizontal

Managers

Air

Director

Duct Kit

Vertical

Manager

(Fingers on Rail)Width Depth Height Front Rear

1 X1SN-C1001 30 48 44RU Black Square Rails Brush Front/Rear Perf. Split Perf. (2) 10" Center (2) Rear (4) per Side None Front & Rear Rails2 X1SN-C1002 30 48 44RU Black Square Rails Brush+Chimney Ready Perf. Split Solid (2) 10" Center (2) Rear (4) per Side None Front & Rear Rails3 X1SN-C70101001 30 48 44RU Black Square Rails Brush Front/Rear Perf. Split Perf. (2) 10" Center (2) Rear (4) per Side None Front Rails4 X1SN-C70101002 30 48 44RU Black Square Rails Brush+Chimney Ready Perf. Split Solid (2) 10" Center (2) Rear (4) per Side None Front Rails5 X2SN-C65091001 40 48 44RU Black Square Rails Brush Front/Rear Perf. Split Perf. (2) 10" Center (2) Rear (4) per Side (1) 6509 Front Rails6 X2SN-C65091002 40 48 44RU Black Square Rails Brush+Chimney Ready Perf. Split Solid (2) 10" Center (2) Rear (4) per Side (1) 6509 Front Rails7 X2SN-C65091004 40 48 44RU Black Square Rails Brush Front/Rear Perf. Split Perf. (2) 10" Center (2) Rear (4) per Side (2) 6509 Front Rails8 X2SN-C65091005 40 48 44RU Black Square Rails Brush+Chimney Ready Perf. Split Solid (2) 10" Center (2) Rear (4) per Side (2) 6509 Front Rails9 X2SN-C70181001 40 48 44RU Black Square Rails Brush Front/Rear Perf. Split Perf. (2) 10" Center (2) Rear (4) per Side 7018 Front Rails10 X2SN-C70181002 40 48 44RU Black Square Rails Brush+Chimney Ready Perf. Split Solid (2) 10" Center (2) Rear (4) per Side 7018 Front Rails

* For Central Office White color, replace 1 with 2 (ex: X1SS-C2001, X1SN-C70102001).

Notes:

All configured enclosures include one Side Panel and one Bottom Panel with Brush.

Switch-specific configuration includes all enclosure components needed to host given switch.

Power Distribution Units (PDUs) are not included in above configurations, refer to PDUs Section of the catalog (pgs. 69–76) for options.

Configured seismic enclosures include front rail air seal kit.

For “chimney-ready” configuration, refer to Containment Section of the catalog (pgs. 31–34) for chimney and accessories options.

Part No. shown: X2SN-C70181001

(44RU H x 40" W x 48" D)

Configured Enclosures

Belden offers fully configured enclosures as a single part number to meet specific application needs.

The following are a sample of common configurations for Belden XSS and XSN Series.

Contact your local Belden sales representative to discuss your specific needs.


Faster.

Easier.

Better.

En

clo

su

res a

nd

Ra

ck

s

X2SS441211222Part number example:

X 1

Color


2

Bottom Panel

# Description1 Solid Panel2 Brush Panel

2SS

Frame Style/Size (1-3)

# Description1SS 24"W x 48"D2SS 30"W x 48"D

1

Top Panel Style (4)

# Description0 None1 Solid2 Solid, w/Front

Rear Brush (5)3 Heat Containment

Ready w/Brush (5)

2

Rear Door (9-10)

# Description0 None1 Perforated2 Split Perforated (10)3 Solid4 Split Solid (10)

44

Frame Height

RU Description44 84.00"

2



1

Front Door (9)

# Description0 None1 Perforated

2

Side Panels


Ordering Matrix for Seismic Server Enclosures (XSS)

Notes:

1) Enclosure dimension (measured without doors).

2) Enclosure construction: Welded steel, ganging harware, grounding studs in frame base front and rear.

3) Enclosure static load capacity is 2,000 lbs, Enclosure seismic load capacity is 1,000 lbs; BELLCORE GR-63-CORE, Section 5.4.1 Certification.

4) Custom top panel available on request for volume orders.

5) 30" wide frame is provided with six top brush openings for networking and power cable entry.

6) 11 AWG mounting rails provide standard 19" rack spacing to EIA-310-D requirements.

7) Equipment mounting hardware (50) included with rails (4).

8) Each EIA Rail has numerial marking for each rack unit (starting at unit 1 at bottom).

9) Doors are surface mounted, reversible and provisioned with “swing handle” hardware, allowing changing of locksets.

10) Split doors only available on 30" wide frame, with three- point latching "swing handle" hardware to facilitate change of lock set.

XSS Series — Options and Accessories

EIA Mounting Rails

Includes two pair of rails and mounting hardware (50). Default hardware for square hole style rails is M6.

XSS 44 RLS

Frame Width

24 24"30 30"

Mounting Rail Type

CN6 Square Hole w/6 mm1032 10-32 Tapped1224 12-24 Tapped

XSS Enclosure, 30"Wx48"D frame, 44RU, Black, 10-32 tapped

rails, solid top panel, perforated front door, split perforated rear

door, 2 side panels, bottom panel with brush opening.


Front Rail Air Seal Kit (with side air blockers)

Front Rail Air Seal Kit, 44RU, 24" Wide, Black XSS4424RSK01

Front Rail Air Seal Kit, with Brush Openings, 44RU, 30" Wide, Black XSS4430RSK01

Front Rail Air Seal Kit, 44RU, 24" Wide, CO White XSS4424RSK02

Front Rail Air Seal Kit, with Brush Openings, 44RU, 30" Wide, CO White XSS4430RSK02

Cable Manager Lacing PanelsVertical Manager Panel 3.5" Wide, Black XSSVMP014401

Vertical Manager Panel 7.0" Wide, Black XSSVMP024401

Vertical Manager Panel 3.5" Wide, CO White XSSVMP014402

Vertical Manager Panel 7.0" Wide, CO White XSSVMP024402

Cable Manager Fingers for Mounting RailsFinger Strip Kit for 1 Rail, 44RU (mounts to EIA rail) XSSFS4401

Finger Strip (Qty=1) 11RU Section XMFS01

XSS 44 48 SP1

Color

01 Black02 CO White


Includes one side panel. Seismic panel provisioned to be bolted to enclosure.


En

clo

su

res a

nd

Ra

ck

s

X1SN441311222Part number example:

X 1

Color

# Description1 Black

2 Central Office White

2

Bottom Panel

# Description1 Solid Panel2 Brush Panel

1SN

Frame Style/Size (1-3, 5)

# Description1SN 30"W x 48"D2SN 40"W x 48"D

1

Top Panel Style (4)

# Description0 None1 Solid2 Solid, w/Front

Rear Brush 3 Heat Containment

Ready w/Brush

2

Rear Door (9-10)

# Description0 None1 Perforated2 Split Perforated3 Solid4 Split Solid

44

Frame Height

RU Description44 84.00"

3



1

Front Door (9-10)

# Description0 None

1 Perforated

2 Split Perforated

2

Side Panels


Ordering Matrix for Seismic Networking-Switch Enclosures (XSN)

Notes:

1) Enclosure dimension (measured without doors).

2) Enclosure construction: Welded steel, ganging harware, grounding studs in frame base front and rear.

3) Enclosure static load capacity is 2,000 lbs, enclosure seismic load capacity is 1,000 lbs; BELLCORE GR-63-CORE, Section 5.4.1 Certification.

4) Custom top panel available on request for volume orders.

5) Enclosure frame is provided with six top brush openings for networking and power cable entry.

6) 11 AWG mounting rails provide standard 19" rack spacing to EIA-310-D requirements.

7) Equipment mounting hardware (50) included with rails (4).

8) Each EIA Rail has numerial marking for each rack unit (starting at unit 1 at bottom).

9) Doors are surface mounted, reversible and provisioned with “swing handle” hardware, allowing changing of locksets.

10) Split doors only available on 30" wide frame, with three- point latching "swing handle" hardware to facilitate change of lock set.

XSN Series — Options and Accessories

EIA Mounting Rails

Includes two pair of rails and mounting hardware (50). Default hardware for square hole style rails is M6.

XSN 44 RLS

Frame Width

24 24"30 30"

Mounting Rail Type

CN6 Square Hole w/6 mm1032 10-32 Tapped1224 12-24 Tapped

XSN Enclosure, 40"Wx48"D frame, 44RU, black, 12-24 tapped

rails, solid top panel, perforated front door, split perforated rear

door, 2 side panels, bottom panel with brush opening.


Cable Lacing PanelsVertical Manager/Lacing Panel, 10" Wide, Black XSNVMP440301

Vertical Manager/Lacing Panel, 10" Wide, CO White XSNVMP440302

Cable PDU/Manager Rear PanelCable PDU Manager Rear Panel, 44RU, Rear, Black XSN44VRPM101

Cable PDU Manager Rear Panel, 44RU, Rear, with 6 Rings, Black XSN44VRPM201

Cable PDU Manager Rear Panel, 44RU, Rear, CO White XSN44VRPM102

Cable PDU Manager Rear Panel, 44RU, Rear, with 6 Rings, CO White XSN44VRPM202

Top Cable Trough with CoverTop Cable Trough with Cover, 30" Wide, Black XSNTCT3001

Top Cable Trough with Cover, 40" Wide, Black XSNTCT4001

Top Cable Trough with Cover, 30" Wide, CO White XSNTCT3002

Top Cable Trough with Cover, 40" Wide, CO White XSNTCT4002

XSN 44 48 SP1

Color

01 Black02 CO White


Includes one side panel. Seismic panel provisioned to be bolted to enclosure.

Top Cable Through with Cover (8.5" W x 4.0" H)


Faster.

Easier.

Better.

Containment Overview

Cooling a typical Data Center represents 30–40% of total operational costs. Most Data Centers are oversupplied with cold air at a ratio of 2 to 2.5 (volume of cold air supplied to volume consumed). A standard cold/hot aisle approach can lead to hot spots and higher operating costs, especially with today’s high-efficiency servers that can reach exhaust air temperatures in excess of 125° F, restricting the ability to service equipment. Containment is an industry proven method of creating separation between the cold supply air and hot return air, while allowing the elimination of cold air bypass and reducing wasted cooling capacity.

With containment, hot air is directed to CRAC units through active or passive chimneys for hot spot-free computing space. This allows increasing the supply air temperature for reduced cooling costs and wider free (air economizer) cooling windows. The chimney containment approach easily handles high-temperature exhaust air from high-efficiency servers. Based on computing load and location within the computing room, both passive and active chimneys can be used in the same space. Passive chimneys can also be converted to active when needed.

Belden passive (up to 10kW per enclosure) and active (up to 30kW per enclosure) chimneys allow for a scalable solution to meet today's and tomorrow's containment challenges. They are also ideal for existing Data Centers, and non-Belden enclosures can be retrofitted with chimney containment by using a customized adaptor plate. Belden engineers can recommend specific containment solutions based on the needs of the Data Center and enclosure specifications.

En

clo

su

res a

nd

Ra

ck

s

Heat Containment Systems Passive and Adaptive Enclosure Heat Containment (AEHC) System

• Reduces cooling cost by 30–50%

over traditional hot/cold aisle

deployment

• Creates a high level of separation

between supply and return air

• Eliminates hot spots, increases IT

equipment availability

• Eliminates bypass air and air

recirculation

– Reduces or eliminates cold air

oversupply (2.5 to <1.2)

– Enables high-density deployment

(up to 30kW/rack) without precision

cooling

– Increases supply air temperature

(better use of economizer loop,

8–10˚)

– Increases return air temperature

for better CRAC efficiency

Hea

t Co

nta

inm

en

t (AE

HC

) Syste

m


Heat Containment Systems (continued)

Maximize hosting density with containment of up to 30kW per enclosure

Passive and Active Chimney Systems

• Passive systems rely on the effectiveness of server fans, combined with pressure differential between the enclosure and return spaces

• Passive system capacity peaks around 10kW (but can be higher) and varies based on chimney length, position in relation to CRAC, return plenum pressure and exhaust air temperature

• Passive and active chimneys are available as through-ceiling chimneys that protrude approximately 2" into the return plenum, and against-the-ceiling chimneys that adjust and feature a rubber gasket for effective sealing against the drop ceiling

• To account for fans and controller units, chimney length for active containment should be sized by deducting 11.5" from distance between enclosure top and return ceiling

• Belden X Series enclosures equipped with containment top panels accept both passive and active chimneys, allowing for easy passive-to- active conversion

AEHC Overview

Belden's active Adaptive Enclosure Heat Containment (AEHC) System is a highly efficient and cost-effective method for cooling enclosures while preventing the mixing of hot and cold air in the data center. When networked, AEHC chimneys allow aggregation of exhaust air volume of entire enclosure pods, enabling real-time control of CRAC units and creating a logical link between the cooling plant and the computing load. This unique attribute allows reduction of cooling-operating costs, particularly in virtualized, clustered computing environments characterized by highly dynamic computing loads.

• AEHC uses high-capacity fans controlled by a pressure sensor to ensure dynamic balancing of intake and exhaust air volumes

• The system maintains neutral pressure in the enclosure plenum for highly efficient server fan operation

• Can be networked in a pod/row for redundancy in virtualized, clustered computing environments

• Multiple enclosures can share AEHC chimneys based on hosted computing density (three enclosures per chimney is typical)

• AEHC is highly scalable with chimneys added as needed with increased computing loads

• A pair of hot swappable brushless fans with a combined capacity of 10, 20 or 30kW connect to the AEHC controller, enabling quick and easy capacity upgrades (different capacity fans cannot be used in the same enclosure)

• Fan motors are engineered to ensure longevity, high air displacement and low power consumption for mission-critical facilities

Passive chimney shown here in adjustable

and against-the-ceiling version

AEHC chimney shown here in

through-the-ceiling version

AEHC chassis (23.5"Wx16.9"Dx11.5"H)

host the fans and controller

Example of both Passive and Active Chimney Systems

Containment Enclosures

• Designed for chimney containment, Belden XM, XS, XSS-XSN Seismic and XN Series enclosures feature sealing front mounting rails that separate cold supply air from hot return

• 42" or 48" deep enclosures are recommended for optimal chimney containment performance

• Gasketed solid rear door options and brushed cable entries prevent hot return air from leaking back into computing space

• All X Series enclosures can be equipped with passive or active chimneys

En

clo

su

res a

nd

Ra

ck

sH

ea

t C

on

tain

me

nt

(AE

HC

) S

yste

m


Faster.

Easier.

Better.


Pressure-based containment control for best use of cooling capacity

Belden AEHC Is Comprised of:

• An enclosure configured to accept the AEHC system

• A chassis with controller and two fans

• A controller for power input and system networking and control

• A pair of AEHC fans per chassis with a combined containment capacity of 10, 20 or 30kW

• A pressure sensor for fan speed control

• A dual-function temperature/humidity sensor to monitor intake air

• An AEHC chimney to provide the physical link between the chassis and return plenum

Embedded software allows each AEHC unit to be fully

autonomous. The AEHC controllers have their own IP

address, enabling network connection. The AEHC

then allows for real-time monitoring of the heat load,

temperature and alarm conditions for each IT enclosure.

The threshold setting in Belden's AEHC system software

provides early warning alarms for problem conditions.

Alarms are automatically reported. Supported Network

Protocols: DHCP, HTTPS, SMPT/POP3, HTTP, ICMP,

TCP/IP, SNTP, DNS.

AEHC Single Enclosure Diagram (Side View)

AEHC Row Function Diagram

Fan A

Containment Chimney

Fan B

AEHC IP-

Based

Controller

Pressure

Support

Connection

Port

Dual Power

Feed C13 Cords

120/208V

Network

Connection

Port

Rear View of AEHC Contained Enclosure

En

clo

su

res a

nd

Ra

ck

sH

ea

t Co

nta

inm

en

t (AE

HC

) Syste

m

• The AEHC system is powered (autosensing 120 or 208V) via the enclosure PDUs and accepts two distinct power feeds for redundancy

• A combination of temperature-humidity sensors with AEHC controller can collect and store environmental data. When networked, real-time data can be accessed via the intuitive user interface or third-party's DCIM software using SNMP (MIB file)

• Environmental, mechanical and electrical thresholds and alarms are easy to configure and can be sent directly to e-mail addresses (through an escalation process)



Options and Accessories

Other Accessories


AEHC Controller

AEHC Controller (1) with Power Cords C13 (2), 5-15P (2) HCH001

AEHC Fans

AEHC 10kW AEHC Fan (1) with Digital Display HCFD10



AEHC Sensors

AEHC Dual Function Temperature/Humidity Sensor (1) HCP002

AEHC Pressure Sensor (1) HCP001

AEHC Chassis

AEHC Chassis, Black HCC001-B

AEHC Chassis, Central Office White HCC001-W

AEHC Chassis Blank Panels

AEHC Chassis Blank Panels, includes Blank for Fans and Controller, Black HCCBP-B

AEHC Chassis Blank Panels, includes Blank for Fans and Controller, Central Office White HCCBP-W

Chimney Blank Panel for Active or Passive Containment (compatible with 24", 30" and 40" enclosures)

Black HCDBP-B

Central Office White HCDBP-W

Intelligent hot swappable fan cartridges allow for ease of

maintenance and system scalability.

AEHC Controller

Belden's AEHC System utilizes pressure sensing

to dynamically adjust for speed, resulting in perfect

balance between intake and exhuast air volume.

Adaptive Enclosure Heat Containment System

Includes (1) Black Chassis, (1) Controller, (2) Fan Cartridges, (1) Pressure Sensor, (1) Temperature/Humidity Sensor, (2) C13 Power Cords, (2) 5-15P Power Cords

Passive Chimney — Through Ceiling

HCDP0

Color

B BlackW CO White

Color

B BlackW CO White

Passive Chimney — Against Ceiling

(Adjustable)

HCDPA0

Chimney Height

24 24" 60 60"33 33" 66 66"36 36" 72 72"42 42" 78 78"48 48" 84 84"54 54"

Chimney Height

24 21"– 27"36 33"– 39"48 45"– 51"60 57"– 63"72 69"– 75"84 81"– 87"

En

clo

su

res a

nd

Ra

ck

s

HCS0

Containment Capacity

10 10kW20 20kW30 30kW

Color

B BlackW CO White

AEHC Chimney — Against Ceiling

(Adjustable)

HCDA0

Color

B BlackW CO White

AEHC Chimney — Through Ceiling

HCD0

Color

B BlackW CO White

Chimney Height

24 24" 60 60"33 33" 66 66"36 36" 72 72"42 42" 78 78"48 48" 84 84"54 54"

Chimney Height

24 21"– 27"36 33"– 39"48 45"– 51"60 57"– 63"72 69"– 75"84 81"– 87"

Hea

t C

on

tain

me

nt

(AE

HC

) S

yste

m


Faster.

Easier.

Better.

XNM Style NEMA-12 Enclosure with Front and Rear Doors,

Side Panels, EIA Mounting Rails and Optional Side-Mounted

Air Conditioning Unit. Part No. shown: XNM84-3-11212.

XNM Series — NEMA-12 EnclosuresIdeal for use in industrial networking

Applications

Designed for dusty environments, Belden XNM enclosures allow hosting of networking/control equipment in factories, warehouses and on the production floor. Optional air conditioning AC units allow temperature control for stand-alone applications. Belden has extensive NEMA-style networking enclosure experience and capability to customize products-solutions.


• NEMA 12 compliant for hosting servers and switches in industrial environments

• Free standing welded frame with modular construction

• 84"H x 29"W x 40"D

• Mounting rails are adjustable to either 19" or 23" EIA spacing

• Three-point compression-style lift-and-turn latch system

• Glass front door uses scratch-resistant tempered safety glass

En

clo

su

res a

nd

Ra

ck

s

XNM Front with Doors and Panels

Solid side panel with cam lock and six-point

clamping from interior

Front door with 1/4" tempered glass with three-point

latching and three lift-off hinges

Leveling legs and casters

(4) Adjustable EIA Mtg. with 10-32 tapped holes; 43RU Four 4" access

holes with sealed removable covers

Solid rear door with three-point latch and three lift-off hinges

Optional A/C unit mounted to side panel

84"

40" 29"


Air Conditioning Units

DescriptionBelden

Part Number

Front/Rear DoorsSolid w/3 pt. Swing Handle Latch and Lock 8429-NSD-3

Tempered Glass w/3 pt. Swing Handle Latch and Lock 8429-NGD-3

Fan/Filtered (7" fan = 235 CFM) with 3 pt. Swing Handle Latch and Lock 8429-NFD-3

Tempered Glass w/Keyboard Compartment with Fan/Filtered Latch 8429-NKD-3

Side PanelsOne Solid w/Lock 8440-01-NSP-3

Two Solid w/Lock 8440-02-NSP-3

Enclosure Components: Doors and Side Panels

Technical Specifications

Belden

Part NumberH W D Mounting

Enclosure

Weight*

Load

Capacity**

Rack

SpacesUsable Depth

Enclosure Size (Including gland plate, casters and levelers) At Latch To Inside of Door

XNM84-3-10000 84" 29" 40" 19" or 23" 462 lbs 2,000 lbs 45RU 37.5" 38.5"

* Enclosure weight is an estimate for shipping a fully configured enclosure with Top, Doors, Sides and Power Strip.

** Load capacity on levelers.


BTUs/Hr.Volts

(Hz)

Amps

(max.)

Temp.

(max.)Weight H W D

Air Conditioning Units

2200 120/60 6.0 125º F 57 lbs 30.1" 12.27" 6.34"3000 120/60 8.1 125º F 57 lbs 30.1" 12.27" 6.34"3800 120/60 7.8 125º F 65.5 lbs 30.1" 12.27" 8.34"2500 120/60 7.9 125º F 73 lbs 28.5" 19.25" 6.38"3500 120/60 8.2 125º F 73 lbs 28.5" 19.25" 6.38"5000 120/60 8.7 125º F 74 lbs 28.5" 19.25" 6.38"12000 120/60 19.6 131º F 139 lbs 52.1" 17.65" 10.34"

Air Conditioners

Most Belden enclosures can be customized to accept highly efficient air conditioning units.

En

clo

su

res a

nd

Ra

ck

s

Ordering Matrix for NEMA-12 Enclosures

XNM 3

Color

# Description3 Black

211 184

Frame Height

# Description84 84" (45RU)

Mounting

# Description1 19" Mounting, 10-32 Tapped2 23" Mounting, 10-32 Tapped

2

Notes:

1) * Additional cooling options up to 20K BTU/AC available.

Cooling (1)

# Description0 None1 2500 BTU A/C2 5000 BTU A/C

Front Door

# Description0 None1 Solid 3 Pt. Latch2 Glass 3 Pt. Latch3 Fan/Filtered 3 Pt. Latch4 Glass 3 Pt. Latch w/Keyboard Compartment

Rear Door

# Description0 None1 Solid 3 Pt. Latch2 Glass 3 Pt. Latch3 Fan/Filtered 3 Pt. Latch

Sides

# Description0 None1 One Solid Side2 Two Solid Sides

XNM84311212Part number example:

XNM Enclosure, 29"Wx40"D frame, 45RU, black, 19" mount

10-32 tapped rails, 2500 BTU AC, glass front door, solid rear

door, 2 side panels.


Faster.

Easier.

Better.

C Series EnclosuresMulti-use enclosure balancing performance and value

Highly versatile, cost-efficient 19" mount enclosure provides quality solutions for a wide variety of IT, Security and Data Center applications. Perfect for both stand-alone or ganged configurations.

Features

• Available in: - 600 and 800 mm width options - 1000 and 1200 mm depth options - 42RU height

• 1,980 lbs static load capacity

• Lightweight and strong

• Manufactured with premium-grade hot and cold rolled steel sheet

• Contoured high-density perforated quick- release, field-reversible doors

• Two-piece side panels provide convenient access to installed equipment in stand-alone applications

• Standard 19" mount per EIA -310D

• Fully adjustable mounting rail depth

• Rack unit (RU) identifier printed on mounting rails for quick identification

• Open bottom for easy cable access

• Top panel with rear brush opening

• All materials RoHS compliant

Standard Configuration includes

• Black powder-coat paint

• Perforated front door with lock handle

• Split perforated rear door with lock handle

• Four EIA mounting rails, cage nut style with M6 hardware included (50 pieces)

• Cable routing opening in mounting rails (only for 800 mm wide enclosure)

• Two solid side panels

• Top panel with brushed openings

• Open bottom

• Two rear cable lacing/PDU mount panels

• Casters, levelers and ganging kit/hardware included

• Grounding provision front/rear and top/bottom

• Bonding wires between frame and doors

• For shelves and horizontal managers

see pages 64–65

• For PDUs see pages 69–76

Brushed Top Panel Opening

800 mm Wide Enclosure (front view)

(2) Rear Cable Lacing/PDU

Mount Panels

Cable Routing Opening

in Mounting Rails for the

800 mm Wide Enclosure

En

clo

su

res a

nd

Ra

ck

s

1936 mm

1000 mm or

1200 mm600 mm

or 800 mm


C Series Enclosures (continued)

Available in 600 mm (23.6") and 800 mm (31.5") width options

Ordering Information

DescriptionBelden Part Number

C1S42-1-211221 C2S42-1-211221

600 mm Wide EnclosureWidth 600 mm 23.62 in. 600 mm 23.62 in.Depth 1000 mm 39.37 in. 1200 mm 47.24 in.Height 42RU 42RUHeight without Casters 1936 mm 76.22 in. 1936 mm 76.22 in.Height with Casters 1981 mm 77.99 in. 1981 mm 77.99 in.Net Weight 106.5 kg 235 lbs 110.4 kg 243 lbsStatic Load Capacity 900 kg 1984 lbs 900 kg 1984 lbsMaximum Mounting Depth 895 mm 35.24 in. 1095 mm 43.11 in.Front Door Total Open Area 1,074 sq. in. 1,074 sq. in.Rear Door Total Open Area 1,046 sq. in. 1,046 sq. in.Door Opening Radius 135˚ 135˚

DescriptionBelden Part Number

C3S42-1-211221 C4S42-1-211221

800 mm Wide EnclosureWidth 800 mm 31.50 in. 800 mm 31.50 in.Depth 1000 mm 39.37 in. 1200 mm 47.24 in.Height 42RU 42RUHeight without Casters 1936 mm 76.22 in. 1936 mm 76.22 in.Height with Casters 1981 mm 77.99 in. 1981 mm 77.99 in.Net Weight 114.4 kg 252 lbs 117.4 kg 259 lbsStatic Load Capacity 900 kg 1984 lbs 900 kg 1984 lbsMaximum Mounting Depth 895 mm 35.24 in. 1095 mm 43.11 in.Front Door Total Open Area 1,483 sq. in. 1,483 sq. in.Rear Door Total Open Area 1,563 sq. in. 1,563 sq. in.Door Opening Radius 135˚ 135˚

En

clo

su

res a

nd

Ra

ck

s


Faster.

Easier.

Better.

XWM Series — Wall Mount EnclosuresWall Mount Enclosures are an ideal hosting option in confined spaces

Applications

Wall mount enclosures provide IT/Networking hosting in spaces that often serve another primary function, and where space optimization is critical. They are designed for applications that require secure hosted devices and are ideal for locations where floor mounting space is limited, as is common in retail establishments, schools and offices.

Available in mounting unit increments of 9RU, 12RU and 20RU, Belden Wall Mount Enclosures offer great aesthetics, rugged construction, optimized equipment access and flexible cable management and access features.

Design and Structural

Features

• Sturdy welded steel construction

• Durable black powder-coat finish

• Front door options: vented, smoked Plexiglass or solid front

• Door swing direction is field reversible

• Lockable front door, sides and rear section

• Open rear section for cable access through mounting wall

• Top and bottom holes in rear section for conduit connection and cable access

• Comes with mounting template for quick and easy wall mounting

• Removable sides for improved access (12RU and 20RU only)

XWM-2109-GD

XWM-2312-SD

• Two pairs of 12-24 tapped 19" EIA depth-adjustable mounting rails (includes mounting hardware)

• Swing-out mid-section for rear access to equipment

• Vented front (Plexiglass door only), sides, top and bottom panels for proper heat dissipation

• Top and bottom panel allow optional 4" fan mounting

XWM-2312-GD

En

clo

su

res a

nd

Ra

ck

s


XWM Series — Wall Mount Enclosures (continued)


Belden

Part Number W H D Cable Entry Mounting

Removable

Side Panels

Rack Unit

(RU)Door Type Weight

Weight

Capacity

Wall Mount EnclosuresXWM-2109-GD 21" 20.12" 22.87" (4) 1" Conduit (4) 13/32" dia. No 9 Plexiglass 45 lbs 130 lbsXWM-2109-SD 21" 20.12" 22.87" (4) 1" Conduit (4) 13/32" dia. No 9 Solid 45 lbs 130 lbsXWM-2312-GD 23" 25.25" 27.5" (6) 2" Conduit (4) 13/32" dia. Yes 12 Plexiglass 70 lbs 150 lbsXWM-2312-SD 23" 25.25" 27.5" (6) 2" Conduit (4) 13/32" dia. Yes 12 Solid 70 lbs 150 lbsXWM-2320-GD 23" 39.25" 27.5" (6) 2" Conduit (6) 13/32" dia. Yes 20 Plexiglass 95 lbs 175 lbsXWM-2320-SD 23" 39.25" 27.5" (6) 2" Conduit (6) 13/32" dia. Yes 20 Solid 95 lbs 175 lbs

DescriptionBelden

Part Number

Optional AccessoriesFan Assembly (2-4" Diameter Fans, 160 CFM with Guard) XWM-9312-1600

Lacing Panel 3" Wide x 9RU XWMLP9



12-24 Mounting Hardware (Bag of 25) 8917-0125

PDU, Rack Mount, 1RU, 120V, 15A, 5-15P Plug w/10' Cord, 6 x 5-15R Receptacles, On/Off Switch, Thermal Circuit Breaker and Surge Suppression 9BF1-061002

PDU, Rack Mount, 1RU, 120V, 20A, 5-20P Plug w/10' Cord, 10 x 5-20R Receptacles, On/Off Switch, Thermal Circuit Breaker and Surge Suppression 9BG1-101001

XWM-9312-1600 Fan Assembly

Dimensions

22.875"21.00"

20.125"

19.75"

XWM-2109-GD

25.25" or

39.25"

27.50"23.00"

21.65"

XWM-2312-GD and XWM-2320-GD

En

clo

su

res a

nd

Ra

ck

s


Faster.

Easier.

Better.

2- and 4-Post Distribution Rack SystemsModular High Density Racking System (HDRS) for network cross-connect

HDRS Modular High-Density Racking System

BHVHH06

High-Density, Double-Sided

Vertical Manager

BHVH006*

High-Density, Single-Sided

Vertical Manager

BHVL006*

Low-Density, Single-Sided

Vertical Manager

BHVHL06

High/Low-Density, Double-

Sided Vertical Manager

WIDTH

DEPTHDEPTH

Single-Sided Double-Sided

HDRS Vertical Manager Capacity

Single-Sided Manager # of Cable 35% Fill

High Low Width (in.) Depth (in.) Cat 6 0.250" dia. Cat 6A 0.295" dia.

BHVH003 BHVL003 3.6 8.75 194 126BHVH006 BHVL006 6 8.75 321 209BHVH010 BHVL010 10 8.75 535 348BHVH012 BHVL012 12 8.75 642 417

Double-Sided Manager # of Cable 35% Fill

High/High High/Low Width (in.) Depth (in.) Cat 6 0.250" dia. Cat 6A 0.295" dia.

BHVHH03 BHVHL03 3.6 13.75 388 252BHVHH06 BHVHL06 6 13.75 642 417BHVHH10 BHVHL10 10 13.75 1070 696BHVHH12 BHVHL12 12 13.75 1283 835

*High- and low-density vertical manager shown here with

optional back covers, BHBV06X.

En

clo

su

res a

nd

Ra

ck

s

Applications

These high-reliability products have been designed specifically for networking environments — from Telecom closets to world-class Data Centers — to help you make the best use of valuable real estate and simplify MACs (Moves, Adds and Changes).

The HDRS is a well-engineered cross connect and hosting platform that offers you a high level of versatility and flexibility in systems design for ultimate network density and manageability.

How It Works

Create exactly the racking system you need from our selection of steel and aluminum distribution and server racks, combined with more than 50 standard cable management components and accessories. These items have been designed for complete compatibility and integration. The components include:

• Distribution and server racks in aluminum or steel; knockdown or welded; 2 or 4 posts

• Choice of low- or high-density vertical cable managers in single- or double-sided configurations

• High-density vertical manager half door allows easy cable access and hinging of the doors to both right and left side

• Horizontal cable managers with bend radius control and double-hinge cover

• Accessories: Retention Gates, Divider Bars, Transition Channels and more

How To Order

Select any of the Distribution and Server Rack styles.

Select any of the Vertical Cable Managers listed for Distribution and Server Racks.

Choose any of the Accessories for the BHV Vertical Managers, Horizontal Managers or Transition

Channels (See pages 44–45 for Technical Specifications and Options Tables).


Unmatched Density

• Designed to work seamlessly with Belden IBDN copper and fiber systems, cable management fingers align with rack RUs for easy routing of patch cords to vertical managers, eliminating the need for horizontal managers

High Level of Modularity

• Enables ease of removal or reconfiguring Belden’s wide selection of accessories and components

• Interchangeable cable retention gates, doors, fingers and accessories adapt to specific needs

2- and 4-Post Distribution Rack Systems (continued)

High-Density Racking System Features

High-Density

(1RU) Fingers

Low-Density

Vertical Manager

High-Density Vertical Manager

Double-Hinged

Cable Retention

Gate

Low-Density

Finger

Horizontal

Manager

BHH192UR

High-Density

Fingers

Double-Hinged

Cable Retention

Gate

Cable Retention

Gate Pointer

Double-Hinged

Half-Door

Snap-On

Door Hinge

Vertical Manager Part Sets

• Includes a complete set of necessary components, including doors (on high-density managers), gates, push-in fasteners, cable strap mounts, cable retainer bars and mounting hardware

Modular, Removable Finger Sections

• Available in high or low density, finger sections can be easily removed during reconfigurations and easily replaced as needed

• High-density 11RU sections easily screw into vertical managers and align with the rack units, eliminating horizontal managers

System Scalability

• The HDRS is easily reconfigured and modified to handle future system growth, add-ons or changes

Compatibility of Vertical Managers

• Compatible with any EIA-310-D compliant 2- and 4-post racks

Mixed Media Application

• Designed to handle both copper and optical fiber structured cable networks

Accessory Mounting Holes

• 1/4" diameter mounting holes along length of each vertical manager enable easy attachment of accessories, like cable bundle fasteners

Any-Point-to-Any-Point Routing Capability

• Cable can be easily routed from one patch panel to another within the same rack, to the back of the rack or to an adjacent rack, while still maintaining proper cable bend radius

Easy Installation

• Only standard hand tools are required for quick installation and simple field reconfiguration and modification

Great Aesthetics

• Professional flat-black finish is suitable for any world-class telecom environment

• Central Office white color option allows for seamless integration where light-color enclosures are used, improving visibility

En

clo

su

res a

nd

Ra

ck

s


Faster.

Easier.

Better.

XDRS8419-610S02 Seismic Rack (Steel)

84.00

15.00

6.5

EIA Spacing 18.31

17.78 Open

Rails Tapped #10-32 Front

and Rear 44RU

28.00

Applications

Belden offers a complete line of open racks and rack accessories from single-rack applications (Retail, Telecom closet) to high-density, multi-rack patching and switching fields (Computer Room, Data Centers, Central Offices). Belden’s unique cable and connectivity expertise was central in the design of a feature-rich racking system that offers ease of installation, ease with MACs and is highly scalable.

Rack Features: 2- and 4-Post

• EIA-310 compliant, choice of 19" and 23" mounting

• Consult customer service for 23" rack and accessories (horizontal managers)

• Equipment mounting hardware is included

• 2-post rack uprights are front and rear tapped

• Easy rack unit identification for faster install

• Grounding stud standard on all 2-post and 4-post racks

• Steel or aluminum construction

• Seismic certified options

• Knockdown or welded construction

• 4-post racks are adjustable, providing for 28", 32" and 36" depths

Color

• Black (Standard)

• Central Office White available on request

Dimensions


Suitable for single-rack to multi-rack high-density cross-connect

Zone 4 Seismic-Rated Distribution Rack Type XDRS

Part No. Shown: XDRS8419-610

15.00 20.313

84.00 (45RU)

EIA Spacing 18.31 10-32 Tapped

XDR8419-310 Rack (Steel)

84.00 (45RU)

28.0032.0036.00

40.0044.0048.00 20.31

EIA Spacing 18.31 10-32 Tapped

XDR8419-3102836 Rack (Steel) XDRS8419-610 Seismic Rack (Steel)

15.00

6.5

84.00

28.00

EIA Spacing 22.31

21.76 Open

Rails Tapped #10-32 Front

and Rear 44RU

En

clo

su

res a

nd

Ra

ck

s




Description Weight Mounting**Load

Capacity

Height/Rack

Spaces

Belden

Part Number

2-Post Distribution Racks — Steel — Knockdown*#10-32 Tapped 3" Vertical Upright w/Angle Base 63 lbs 19" 1,000 lbs 84"/45RU XDR8419-310

#12-24 Tapped 3" Vertical Upright w/Angle Base 63 lbs 19" 1,000 lbs 84"/45RU XDR8419-312

Value Series Rack, #10-32 Tapped 3" Vertical Upright w/Angle Base 63 lbs 19" 1,000 lbs 84"/45RU XDR8419-310N

Value Series Rack, #12-24 Tapped 3" Vertical Upright w/Angle Base 63 lbs 19" 1,000 lbs 84"/45RU XDR8419-312N

2-Post Distribution Racks Kit — Steel — Knockdown*Value Series Rack Kit, #10-32 Tapped 3" Vertical Upright w/Angle Base, Includes One 4"x 4" Vertical Manager with Snap-On Cover (part # VCMFDR4X4)

76 lbs 19" 1,000 lbs 84"/45RU XDR8419-310N1M

Value Series Rack Kit, #10-32 Tapped 3" Vertical Upright w/Angle Base, Includes Two 4"x 4" Vertical Manager with Snap-On Cover (part # VCMFDR4X4)

89 lbs 19" 1,000 lbs 84"/45RU XDR8419-310N2M

Value Series Rack Kit, #12-24 Tapped 3" Vertical Upright w/Angle Base, Includes One 4"x 4" Vertical Manager with Snap-On Cover (part # VCMFDR4X4)

76 lbs 19" 1,000 lbs 84"/45RU XDR8419-312N1M

Value Series Rack Kit, #12-24 Tapped 3" Vertical Upright w/Angle Base, Includes Two 4"x 4" Vertical Manager with Snap-On Cover (part # VCMFDR4X4)

89 lbs 19" 1,000 lbs 84"/45RU XDR8419-312N2M

2-Post Distribution Racks — Steel — Welded#10-32 Tapped 3" Vertical Upright w/Angle Base – Welded 66 lbs 19" 1,000 lbs 84"/45RU XDR8419-310W

#12-24 Tapped 3" Vertical Upright w/Angle Base – Welded 66 lbs 19" 1,000 lbs 84"/45RU XDR8419-312W

2- and 4-Post Zone 4 Seismic Distribution Racks — Steel — Welded***2-Post Seismic Rack, #10-32 Tapped 6" Vertical Upright w/Angle Base 105 lbs 19" 900 lbs 84"/45RU XDRS8419-610

4-Post Seismic Rack, 28" Deep, #10-32 Tapped 6" Vertical Upright w/Angle Base 215 lbs 19" 900 lbs 84"/45RU XDRS8419-61028

4-Post Seismic Rack, 32" Deep, #10-32 Tapped 6" Vertical Upright w/Angle Base 220 lbs 19" 900 lbs 84"/45RU XDRS8419-61032

2-Post Distribution Racks — Aluminum — Knockdown*#12-24 Tapped, Black, Knockdown 3" Vertical Upright 30 lbs 19" 1,200 lbs 84"/45RU BHRR194

#12-24 Tapped, Black, Knockdown 6" Vertical Upright 41 lbs 19" 1,200 lbs 84"/45RU BHRR6194

4-Post Distribution Racks — Steel — Knockdown*4-Post Rack with Adjustable Depth 28"-32" -36", #10-32 Tapped 3" Vertical Upright w/Angle Base

115 lbs 19" 1,500 lbs 84"/45RU XDR8419-3102836

4-Post Rack with Adjustable Depth 28"-32" -36", #12-24 Tapped 3" Vertical Upright w/Angle Base

115 lbs 19" 1,500 lbs 84"/45RU XDR8419-3122836

4-Post Server Rack — Steel — Welded****XM Series Black Frame with (4) Ajustable Mounting Rails, Square Hole Type with 6 mm Mounting Hardware Included. Frame Size 24"W x 42"D x 85.6"H (45RU), Includes Levelers and Casters

240 lbs 19" 2,000 lbs 85"/45RU X3M45-1-100000 * Knockdown rack shipped not assembled, assembly

hardware is included

** For EIA-23" mounting consult Belden customer service

*** 4-post seismic rack is made of two welded 2-post

rack structures, linked with front to rear member,

shipped unassembled

**** 4-post server rack is not compatible with vertical

managers (see page 45)

XDR8419-310N1M and XDR8419-312N1M


XDR8419-310N2M and XDR8419-312N2M

En

clo

su

res a

nd

Ra

ck

s


Faster.

Easier.

Better.

2- and 4-Post Distribution Rack Managers and Accessories

DescriptionBelden

Part Number

Vertical Cable ManagersValue Vertical Manager with Snap-On Cover 4"W x 4"D VCMFDR4X4

Single-Sided High-Density Vertical Manager w/Doors, 3 5/8"W x 84"H, Black BHVH003

Single-Sided High-Density Vertical Manager w/Doors, 6"W x 84"H, Black BHVH006



Single-Sided Low-Density Vertical Manager w/o Doors, 3 5/8"W x 84"H, Black BHVL003

Single-Sided Low-Density Vertical Manager w/o Doors, 6"W x 84"H, Black BHVL006



Double-Sided High-Density Vertical Managers w/Doors, 3 5/8"W x 84"H, Black BHVHH03

Double-Sided High-Density Vertical Managers w/Doors, 6"W x 84"H, Black BHVHH06



High/Low-Density Vertical Manager w/Front Door, 3 5/8"W x 84"H, Black BHVHL03

High/Low-Density Vertical Manager w/Front Door, 6"W x 84"H, Black BHVHL06



Accessories for BHV Vertical Managers3 5/8"W, Black, Vertical Manager Backcover BHBC03X

6"W, Black, Vertical Manager Backcover BHBC06X



3 5/8"W, Black, Vertical Manager Doors (1 pr) BHDK03X

6"W, Black, Vertical Manager Doors (1 pr) BHDK06X



Slack Management Spool Kit, Black BHSK020

Slack Management Spools (2), Black BHSP020

Gate Kit, 3 5/8"W, Black BHGL03X

Gate Kit, 6"W, Black BHGL06X



Retention Gate (6) 3 5/8"W, Black BHGR03X

Retention Gate (6) 6"W, Black BHGR06X



Finger Section, 11U, Black BHFS11U

Rack Mount Finger Bracket, 11U, Black BHFB11U

Divider Bar, 3 5/8"W, Black BHDB03X

Divider Bar, 6"W, Black BHDB06X



Fastener for Vertical Manager (100) BHPF100

Tie Mount for Vertical Manager (100) BHSM100

Horizontal Manager with Cover19"W x 1RU, Black BHH191UR

19"W x 2RU, Black BHH192UR



1RU, Rack Mount, Finger Duct Manager 3.0"H x 3.0"D Deep with Cover 9512-1901

2RU, Rack Mount, Finger Duct Manager 3.0"H x 3.0"D Deep with Cover 9512-1902N

Transition Channel (Top transition channels are only compatible with knockdown racks)

Top Transition Channel, 19"W x 6"D x Y"H, Black BHTT196

Top Transition Channel High-Density, 19"W x 6"D x 6"H, Black BHTTH196

Lower Transition Channel, 19"W x 6"D x 1.75"H, Black BHTL196

Lower Transition Channel Double, 19"W x 6"D x 3.5"H, Black BHTD196


9512-1902N

VCMFDR4X4 BHBC10X

(Vertical manager not included)

BHTT196 and BHTD196

En

clo

su

res a

nd

Ra

ck

s


XWR and XWB Series — Wall Mount RacksHinged and swing-out for rear access in tight spaces

XWR-1219 Wall Mount Rack in Hinged Style

(shown in closed position with equipment mounted)

Wall Mount Racks are available in two styles: hinged and swing-out. The hinged rack is 12" in height and features an adjustable lower shelf (adjusts 2" to 6"). The swing-out rack is available in heights of 36" and 48" with 19" mounting rails. 2RU, 4RU and 6RU Wall Mount Brackets are also offered for mounting a limited number of components or pieces of equipment.

XWB-2U 2RU Wall Mount Bracket

XWR-3619-18 Swing-Out Style Wall Mount Rack


Description H W D Weight MountingLoad

Capacity

Rack

Spaces

Belden

Part Number

Wall Mount RacksStandard Swing-Out Rack: 36" Wall Mount Rack with 19" Mounting Rails 36" 19.75" 18" 30 lbs 19" 100 lbs 19RU XWR-3619-18

Heavy Swing-Out Rack: 36" Wall Mount Rack with 19" Mounting Rails 36" 19.75" 18" 35 lbs 19" 200 lbs 19RU XWR-3619-18HD

Standard Swing-Out Rack: 48" Wall Mount Rack with 19" Mounting Rails 36" 19.75" 18" 39 lbs 19" 100 lbs 26RU XWR-4819-18

Heavy-Duty Swing-Out Rack: 48" Wall Mount Rack with 19" Mounting Rails 36" 19.75" 18" 40 lbs 19" 200 lbs 26RU XWR-4819-18HD

Hinged Rack: 12" Wall Mount Rack, Hinged, 19" Mounting Rails, Adjustable Lower Shelf 2"–11" to Accomodate Equipment Space 10.9" 19.5" 9.5" 26 lbs 19" 50 lbs 6RU XWR-1219

Wall Mount Brackets2RU Wall Mount Bracket, Black 3.5" 19" 8" 4 lbs 19" 50 lbs 2RU XWB-2U

4RU Wall Mount Bracket, Black 7.0" 19" 8" 8 lbs 19" 50 lbs 4RU XWB-4U

6RU Wall Mount Bracket, Black 10.50" 19" 8" 10 lbs 19" 50 lbs 6RU XWB-6U

1RU rack, includes basket tray attachment hardware 2.0" 19" N/A 12 lbs 19" 20 lbs 1RU XPE-S0001

XPE-S0001 1RU rack attach to basket tray XWR Swing-out Style Wall Mount Rack

33.25 (19RU)

or 45.50 (26RU)36.00

or 48.00

18.00

18.00 Ø4.00 Cable entry

Heavy-Duty XWR Swing-Out Style Wall Mount Rack

33.25 (19RU)

or 45.50 (26RU)

36.00 or

48.00

19.81

18.0018.00

18.31

Reinf. gusset

10-32 Holes

Cable tie

holes

En

clo

su

res a

nd

Ra

ck

s


Faster.

Easier.

Better.

XSW Series — Swing RackFree-standing swing-out rack used where space is limited

The Swing Rack provides easy access to the rear of rack mounted equipment in a free-standing environment. It is ideal for applications where space is limited and rear access is essential. 34.38

75.25(43 RACKSPACES)

4.70

84.00

Caster (1)

XSW Front View

Ø0.75

12.50

7.00 min31.63

15.00

5.00 9.00

34.375

7.00

CLOSED Rack Mount Unit

.25 x 1.25 obr (16)

5.00

4.12

Hinge24.00

OPENED(will open to 90°) Rack

Mount Unit

39.50Approx.

Wall

XSW Top View

XSW-8419

Swing Rack

(shown with

equipment

mounted)

Optional Basket


Description Weight MountingLoad

Capacity

Rack

Spaces

Belden

Part Number

Swing Racks84" Swing-Out Distribution Rack 179 lbs 19" 500 lbs 34RU XSW-8419

Accessories (Sold Separately)

Top Mounting Wire Basket — — — — XSW-0200

Power Strip Mounting Kit — — — — XSW-0100

• Rack can be assembled as a left or right hinge and open 90º

• Rack can be positioned as close as 7" from wall

• Equipment up to 18.5" deep can be pivoted

• Cable management allows for cable routing without interference of the swing rack

• Racks can be bolted side-to-side

• Friction lock prevents rack movement while servicing

En

clo

su

res a

nd

Ra

ck

s

SECTION TWO

Broadcast Enclosures and Racks

Broadcast Enclosures and Racks 48-62

Advantages 49-51

Comparison Chart 51

XSF Series — Slim Frame for Mobile Broadcast/Telecom Applications 52-53

XMF Series — Media Frame for Broadcast Applications 54-56

XME Series — Media Enclosure for Broadcast, Audio Video and Security Applications 57-59

XMER Series — Media Enclosure for Broadcast, Audio Video, Security and Head End Applications 60-62


Engineered for Performance and Ease of Installation for Broadcast, Audio Video, Security, Head End and Mobile Telecom Applications

Belden has designed its Broadcast, Audio Video and Security Rack/Enclosure Series using the same top-quality and user-friendly principles that go into all of our market-leading solutions.

These uncompromisingly strong and well-built structures are combined with component features that optimize cable performance and provide extraordinary flexibility in cable management. These features provide a unique approach to equipment housing and storage needs.

The following pages detail the breadth of our rack/enclosure offering for the Entertainment, Security and Broadcast industries. In addition, Belden offers a complete array of shelves for 19" mount racks and enclosures, including cantilevered, 4-point mount, sliding and keyboard-type shelves.

Belden offers four series of

high-quality enclosures

and racks for your unique

Entertainment, Security,

Head End and Mobile

Telecom applications.


Faster.

Easier.

Better.

Advantages in Using Belden Broadcast Enclosure and Rack Series

Construction

• Welded frame construction for greater strength and structural integrity is standard on all broadcast racks and enclosures

Accessories

• A full complement of accessories will outfit your enclosures with the needed mounting, shelving, work surface and cable management support


• EIA rails are marked with rack space increments for ease of equipment mounting

Cable Management

• Numerous top and bottom entry points simplify cabling

• The rounded, steel-formed cable tie bar (Photo A) reduces pressure points

• The multiple attachment points for our Quick Mount System — or Nylon ties along the mounting rails, rail supports and cable tie bar (Photos B and C) — provide the utmost flexibility in cable routing and lacing

• The Quick Mount fastening system (Photo D) is comprised of a unique swivel base and base fastener. Velcro ties are easily threaded through the fastener base, allowing the cable bundles to be secured to the rack. The system’s swivel base allows for a 90º angle between the cable bundle and the cable tie to allow pressure distribution along the cables

Aesthetics

• Powder coating process provides a textured black finish for a highly resistant, high-end look that showcases your equipment

• Aesthetics can be tailored to your requirements with a variety of doors, panels and customized silk screening options

Temperature Control

• Perforated and vented doors, along with a variety of top panel options, provide flexible cooling options

Power Distribution

• A complete line of Belden power distribution units, including rack mount and vertical mount options,

can be found on pages 69–76

• Grounding studs allow for integral grounding of enclosures and accessories

Seismic Rating

• XME and XMER Series include NEBS seismic rating when anchored with optional seismic anchor bracket kit

Faster.

Easier.

Better.

The enclosure shown here is the XMER Style (Media Enclosure)

Photo A Photo C

Photo B Photo D

Bro

ad

ca

st E

nclo

su

res a

nd

Ra

ck

s


Advantages in Using Belden Broadcast Enclosure and Rack Series (continued)

Features and Benefits

EIA Rail Kits

• Rails are made of 12-gauge steel (XSF uses 16-gauge steel)

• Use standard EIA-310 hole-pattern (10-32 or 12-24 tapped holes)

• Fully adjustable depth; designed to be moved without need to remove rail support hardware

• Mounting hardware supplied with rack

• A series of lacing holes along the rails allow for the easy attachment of cables. Holes are also compatible with our Quick Mount fasteners

• RU marking on all rails facilitates equipment mounting

• RU marks are hidden once the equipment is mounted

Side Cable Chase

(Available on XMER Series)

• Adds 4" of valuable cable management space

• Can be mounted to the side of the enclosure and is compatible with the side panels — or can be mounted in between the enclosures to share cable management space

Side Panels

• The tool-less surface-mounted side panels are quick and easy to install

• Flush version side panels (available only on the XMF Series) can be installed in between joined racks (heat barrier) or end-of-row units without any additional floorspace requirements

• Panels can be used to transform a rack into a free-standing enclosure or to close a row on ganged racks (enhancing the installed look and providing added security)

• Feature lifting handles for easy panel removal

Top Panels

• Solid tops prevent dust from entering the enclosure

• Vented tops allow for convection cooling

• Solid top with 10" (550 CFM) fan for forced hot air evacuation

• Solid top with four 4" (320 CFM), low noise fans for forced hot air evacuation

Doors

• Rugged and rigid construction

• Doors mounted with lift-off hinges are capable of 180° swing, even when enclosures are ganged

• Door swing is field reversible

• Glass door uses anti-static tempered glass, allowing easy cleaning, rigidity and high-end look

• Perforated door features 63% mesh opening allow-ing for minimal air resistance for optimized cooling

• High-quality swing latch includes locking mechanism

Recessed

Caster Base

• Allows for easy positioning of the rack

• Installs directly to bottom flanges of enclosure

• Recessed casters allow the leveling legs to be lowered when the enclosure is in position and raises the casters off the floor

• Includes hardware

EIA Rail Kits

Side Panels

Top Panels

(4) 4" Fan

10" Fan

Vented

Solid

Doors

Solid Vented Tempered

Glass

Perforated

Base

• 4" riser base allows for easy cable routing from rack to rack

• Available in XMF Series: gangable 1-, 2- and 3-bay bases with easy-to-use anchoring holes

• Series of mounting holes allow rack to be secured using common nuts and bolts

• Feature power outlet mounting openings with cover plate

• Includes mounting hardware and grounding stud

• Multi-rack riser bases to meet your specific space requirements (length, height) are available on custom basis

Rack Mount Drawer

• Convenient sliding storage drawers

• 16" deep with lock

• Available in four heights

Front Mount

Work Surface

• Provides a convenient work surface

• 16" deep, single-bay (22") and double-bay (44") width

Bro

ad

ca

st

En

clo

su

res a

nd

Ra

ck

s


Faster.

Easier.

Better.

Advantages in Using Belden Broadcast Enclosure and Rack Series (continued)

Features and Benefits

Faster.

Easier.

Better.

Specifications XSF XMF XME XMER

ApplicationBroadcast, Mobile Telecom,

Space OptimizationBroadcast

Broadcast, Audio Video,

Security

Broadcast, Audio Video,

Security, Head End

Style Rack GangableRack/Enclosure

Stand-Alone or Gangable

Enclosure with Fixed Side

Panels Stand-Alone or

Gangable

Rack/Enclosure

Stand-Alone or Gangable

Dimensions:

Height 20.5"–87" (10–48RU) 22.25"–103" (11–57RU) 48.87"–83.87" (24–44RU) 48.87"–83.87" (24–44RU)

Width 19.19" 22" 22" 22"

Depth 18", 24" or 30" 24", 30", 36" or 40" 20" or 26.5" 26.5", 31.5" or 36"

Frame Construction (Fully Welded) 11-Gauge Steel 11- and 14-Gauge Steel 16-Gauge Steel 14- and 16-Gauge Steel

Front and Rear Mounting RailsYes: Tapped Corner Posts, (fixed front),

Adjustable Rear Rails (5/8" increments)

Yes

Fully Adjustable

Yes

Fully Adjustable

Yes

Fully Adjustable

EIA-310 Compliant Yes (#10-32 or 12-24 tapped) Yes (#10-32 or 12-24 tapped) Yes (#10-32 tapped) Yes (#10-32 tapped)

Door Options:Reversible Front and Rear Doors No Yes Yes Yes

Solid, Perforated or Tempered Glass — Solid or Vented Yes Yes

Top Options No Solid, Vented, Forced Air Fan Solid, Vented, Forced Air Fan Solid, Vented, Forced Air Fan

Side Panel

Options:

Removable No Yes No: Fixed Yes

Panel Style — Flush or Surface Mount Built-In Frame Surface Mount

Shelves (Solid, Vented and Keyboard) Yes Yes Yes Yes

Caster Base Option No Yes Yes Yes

Power Strip Mounting Provision Yes Yes Yes Yes

Cable Management Tie Bar No Yes, Optional No Yes, Optional

Belden Broadcast Enclosure and Rack

Series Comparison Chart

Vertical Lacing Bar

• 1" wide vertical lacing bar is supplied with mounting hardware

• Mounts to the rail supports; fully adjustable depth

• Series of lacing holes are compatible with Belden Quick Mount fasteners to provide flexibility in cable routing


• Mounts to the rail support

• Fully adjustable depth

• Panel is 3" wide and features multiple lacing points

• Ideal for attaching cable bundle

Grounding Provision

• Belden racks are provisioned with grounding studs, enabling integral grounding of rack and accessories

• The copper vertical ground bar mounts to the rack support

• Fully adjustable depth

• Bar is 3/4" wide x 1/8" thick

Quick Mount Fasteners

• Velcro hook and loop with cable tie mount and fasteners provide a quick, flexible way to route the cable bundle within the rack

• Racks are designed with multiple attachment holes (rails, rail supports) for flexibility, ease of installation and to protect cable integrity

Power Distribution Units

• Extensive offering

• Includes monitored and IP-based smart PDUs

• Climate monitoring option available

(See page 78)

Shelves

• Broad selection for 19" mount racks and enclosures

• Cantilevered, 4-point mounted, sliding and keyboard styles

(See page 64)

Bro

ad

ca

st E

nclo

su

res a

nd

Ra

ck

s

pg. 52 pg. 54 pg. 57 pg. 60


Applications

The ultra-slim XSF frame has been designed to minimize the footprint for installation and use in mobile TV trucks. The narrow 19.19" width will accommodate standard 19" mount equipment. The frames gain strength when ganged together in a series.


• Available in 14 heights and 3 depths

• 11-gauge steel, one-piece formed top and bottom; 11-gauge steel formed vertical corner posts

- 20.5" (10RU) to 87" (48RU) Height x 19.19" Wide x 18", 24" or 30" Deep

• Optional aluminum, weight-saving version available on request

• Front corner post contains EIA-310 hole pattern: 10-32 or 12-24 tapped

• Rail support channels are 16-gauge steel, riveted and welded in place


• One pair, 16-gauge steel EIA rails, moveable front to rear in .62" increments

• Each frame is supplied with 10-32 or 12-24 clip nuts for attaching equipment to the rails

• Holes in side flanges of each corner post are available for ganging purposes

• Open bottom with hole pattern to bolt frame to floor; captive grounding studs in bottom sills

Color

• Black durable powder coat

Part No. shown here: XSF473010000

(47RU H x 19.19”W x 30”D)

XSF Series Racks in ganged arrangement

XSF Series — Slim Frame Light and customizable frames for Broadcast Trucks and Mobile Telecom

Bro

ad

ca

st

En

clo

su

res a

nd

Ra

ck

s

18", 24" or 30"

19.19"


Faster.

Easier.

Better.

XSF282410000Part number example:Ordering Matrix for XSF Series

EIA Rail Kit – 1 Pair Includes mounting hardware.

XSF Series — Options and Accessories

XSF CN

Tapped Style

10 10-32 Clip Nuts12 12-24 Clip Nuts

Rail Height (RU)

Refer to RU in Frame Height Chart (above)

EIA Rail Kit – 1 pair with hardware

Bro

ad

ca

st E

nclo

su

res a

nd

Ra

ck

s

Other Accessories


Lacing Accessories

Quick Mount with Fastener, 10 Pieces XMFCTM

XSF 1028

Frame Height

# Description10 20.5"11 22.25"14 27.5"19 36.25"28 52"29 53.75"31 57.25"34 62.5"39 71.25"42 76.5"44 80"46 83.5"47 85.25"48 87"

024

Frame Depth

# Description18 18"24 24"30 30"

0 0

Mounting Rail Kit(Includes 1 pair of rails with hardware)# Description10 10-32 Clip Nuts12 12-24 Clip Nuts

Rear Panel

# Description0 None

Side Panels

# Description0 None

Note:

1) 19" rack mount PDUs will work on all XSF Enclosure heights.

Top Panel

# Description0 None

XSF Enclosure, 28RU, 24" depth, with 10-32 tapped frame,

no top panel, no rear panel, and no side panels.



• Available in 26 heights and 4 depths for versatility in designing studios or production facilities

• 11-gauge steel corner posts; 11-gauge formed top and bottom members; 14-gauge formed rail supports

- 22.25" (11RU) to 103" (57RU) Height x 22" Wide x 24", 30", 36" or 40" Deep

• (4) 12-gauge EIA mounting rails (10-32 or 12-24 tapped)

• Frame is provisioned to accept optional front and rear doors, side and top panels

• Reversible Doors: Surface mount solid, 16-gauge doors or top and bottom vented styles

• Side Panel: Solid, 16-gauge flush side panel or 1-piece formed surface mount panel; surface mount panels add 1/2" per side to overall width

• Top Panel: Solid, vented or with 10" fan

• Vertical Spacing Panel: Easy-to-install; 2.75", 3.66", 4.40" and 5.50" widths; 11RU–57RU heights

• Riser Base: 4" height, 1-3 bays; fully-welded, gangable; power outlet openings with covers; anchoring holes supplied to ease installation

• Caster Base: Recessed; 20", 30", 36" and 40" depths; adds 2.5" to frame height; caster bases install directly to bottom flanges of enclosures; casters are recessed, enabling leveling legs to be lowered when enclosure is in position, allowing the casters to be raised off the floor

• Rack-Mount Drawers: 16" deep sliding storage drawers with lock; available in four heights; mount on EIA rails (mounting hardware included); compatible with all 19" mount racks


• Frame is provisioned for attaching a tool-less, formed surface mount side panel or a flat, flush panel. Flush side can be installed between joined enclosures without any additional floorspace

• Vertical spacing panels add cable management space between racks; includes two panels with attachment studs; panel features lifting handles

• Open top with optional configurable panels

• Open bottom with hole pattern to bolt frame to floor or a raised base; captive grounding studs in bottom sills

• Ganging can be done after equipment is placed in rack

Color


Part No. shown here: XMF4424102140

(44RU H x 22" W x 24" D)

XMF Series - Media FrameFlexible cable management in a narrow frame for Broadcast Studios

Part No. shown here: XMF4424100000TB

(44RU H x 22" W x 24" D)

Bro

ad

ca

st

En

clo

su

res a

nd

Ra

ck

s

Cable Management

• Numerous lacing points on two surfaces of each rail support

• Cable tie holes span entire length of EIA rail on the attachment flange (spaced at 1.75")

• Unique cable tie bar is made of formed steel to eliminate sharp edges; provides multiple attachment points; features cable bend radius control and lacing holes; factory mounted when tie bar option is selected

24", 30" 36" or 40"

22"


Faster.

Easier.

Better.

Bro

ad

ca

st E

nclo

su

res a

nd

Ra

ck

s

XMF443012104TBPart number example:Ordering Matrix for XMF Series

XMF 1 444 2 030

Frame Depth

# Description24 24"30 30"36 36"40 40"

Top Panel

# Description0 None1 Solid2 Vented3 Solid w/10" Fan

1 TB

RU Frame Height36 66"39 71.25"40 73"43 78.25"44 80"45 81.75"46 83.5"48 87"49 88.75"50 90.5"51 92.25"52 94"57 103"

RU

RU Frame Height11 22.25"12 24"13 25.75"14 27.5"16 31"17 32.75"19 36.25"20 38"21 39.75"23 43.25"24 45"28 52"32 59"

Mounting Rail Kit(Includes 2 pair of rails with hardware)# Description1 10-32 Tapped2 12-24 Tapped

Front Door

# Description0 None1 Solid Swing2 Vented

Rear Door

# Description0 None1 Solid Swing2 Vented

Side Panels

# Description0 None1 Flush Mount Side Panel, One2 Flush Mount Side Panels, Set3 Surface Mount Side Panel, One4 Surface Mount Side Panels, Set

Tie Bar (optional)# Description

TB Tie Bar (also see notes)

Notes:

1) Tie bar option (TB): 11–14RU=2TB, 16–19RU=4TB, 20–32RU=8TB, 36–57RU=12TB.

2) 19" rack mount PDUs will work on all XMF Enclosure heights.

Top Panel Options Base Options

Recessed Caster BaseUse of caster base adds 2.5" to enclosure height.

Refer to RU and FRAME DEPTH charts (above).

XMF Series — Options and Accessories

XMF22 XMF

XMF22

TP B 4

CB

Panel Style

1 Solid2 Vented3 10" Fan

Bays (4" High)

1 1 Bay2 2 Bays3 3 Bays

Base Options: 1 Bay, 2 Bays, 3 Bays

and Recessed Caster BaseTop Panel Options: Solid, 10" Fan, Vented

XMF Enclosure, 44RU height, 30" depth,with 10-32 tapped

frame, vented top panel, solid swing front door, no rear door,

set of surface mount side panels, no power strip, tie bar.

Panel Depth

24 24"30 30"36 36"40 40"

Base Depth

24 24"30 30"36 36"40 40"

Base Depth

24 24"30 30"36 36"40 40"


Refer to RU and FRAME DEPTH charts (on previous page).

XMF Series — Options and Accessories (continued)

Side Panel Options: Flush Flat Panel (left),

Formed Surface Mount Panel (right)

Side Panel Options

Panel Style

FS Flush Flat Panel, SingleSS Formed Surface Mount

Panel, Single

Panel Height

(RU)

Refer to RU in Frame Height Chart

Panel

Depth

Refer to Frame Depth Chart

Doors

Solid Vented

EIA Rail Kits – 1 PairIncludes mounting hardware.

XMF RT

Tapped Style

10 10-32 Tapped12 12-24 Tapped

Rail Height (RU)


EIA Rail Kits

Vertical Spacing Panel

XMFSP

Spacing

Panel Width

1 2.75"2 3.66"3 4.40"4 5.50"

Spacing Panel Height (RU)


Door OptionsCompatible with enclosure front or rear.

XMF 22

Door Style

SD SolidVD Vented Top and Bottom

Door Height (RU)


Quick Mount System Components XMFCTM

Bro

ad

ca

st

En

clo

su

res a

nd

Ra

ck

s

Vertical Lacing Bar

XMFVLB

Lacing Bar Height (RU)



XMFVLP

Lacing Panel Height (RU)


Vertical Ground Bar

XMFVGB

Ground Bar Height (RU)


Other Accessories


Lacing Accesories

Quick Mount with Fastener, 10 Pcs. XMFCTM

Velcro 12" Long, Hook and Loop, 10 Pcs./Kit XCTV12



Seismic Anchor Bracket Kit

Seismic Anchor Bracket Kit XMFSB

Adjoining Kits

Bolt-Together Kit for Frames (incl. hardware) XMFBK01

Kit for Loaded Rack Application XMFBK02

Bolt-Together Kit for Bay Bases (incl. hardware) XMFBK03

Edge Guard Kits (for use with Base Bolt-Together Kit)

24"D, 30"D (1 base cutout) XMFEG01

36"D, 40"D (1 base cutout) XMFEG02


Faster.

Easier.

Better.


• Available in four heights and two depths

• 16-gauge, one-piece formed and vented sides; 16-gauge formed bottom and top

- 48.87" (24RU) to 83.87" (44RU) Height x 22" Wide x 20" or 26.5" Deep

• Top and bottom EIA rail support channels are an integral part of the top and bottom; formed center rail support channels are spot welded to the sides

• Two 12-gauge EIA mounting rails (10-32 tapped); additional rails can be added (optional)

• Front and side ventilation for convection cooling

• Stand-alone or gangable, with integrated side panels

• Reversible Doors: Frame is available with optional front and rear solid, glass or perforated surface mount doors

• Top Panel: Solid, vented, with 10" fan or (4) 4" fans; depths of 20 and 26.5"

• Caster Base: Recessed, depths of 20" and 26.5"; adds 1" to height of frame; casters are recessed, allowing leveling legs to be lowered when enclosure is in position, allowing casters to be raised off the floor

• Rack Mount Drawers: 16" deep sliding storage drawers with lock; available in four heights; mount on EIA rails (mounting hardware included); compatible with all 19" mount racks

Cable Management

• Rear Access — Top: three antenna knockouts, each .62" dia. two conduit knockouts, .87" dia. and 1.12" dia. 9" x 2.25" opening with cover plate. Bottom: 4 conduit knockouts, two @ .87" dia., two @ 1.12" dia. 9" x 2.25" opening with cover plate

• Side Access — Top: 4" dia. knockout, located toward the rear. Bottom: 4" dia. knockout, located toward the rear. Optional edge guard to protect the cable is available

• Top Access — 1", 1.5" and 2" knockouts, located toward the rear of top panel

• Cable tie holes span entire length of EIA rail on the attachment flange (spaced at 1.75")

• Fully open top and bottom facilitate cable routing


• Partially open top with optional configurable panels; rear of top contains various electrical knockouts for cable entry

• Open bottom with leveling legs and hole pattern to bolt frame to floor, captive grounding studs in bottom sills


Part No. shown here: XME442641310

(44RU H x 22" W x 26" D)

XME Series — Media EnclosureCost effective and efficient design for Broadcast, Commercial AV

and Security applications

Part No. shown here: XME44260001

(44RU H x 22" W x 26" D)

Bro

ad

ca

st E

nclo

su

res a

nd

Ra

ck

s

20" or 26.5"

22"

Color



Top Panel Options

Refer to RU and FRAME DEPTH charts (above) as needed.

XME Series — Options and Accessories

22 TP

Panel Style

1 Solid2 Vented3 10" Fan4 (4) 4" Fans, (320 CFM)

4-Q (4) 4" Fans, 25 dB (204 CFM)

Panel Depth

14 20"20 26.5"

Door OptionsCompatible with enclosure front or rear.

22

Door Style

GD Tempered GlassSD SolidPD Perforated

Door Height (RU)

Refer to RU in Frame Height Chart (above)

Top Panels

(4) 4" Fan

10" Fan

Vented

Solid

Doors

Solid Tempered

Glass

Perforated

Bro

ad

ca

st

En

clo

su

res a

nd

Ra

ck

s

XME44203131Part number example:Ordering Matrix for XME Series

XME 20 144 3 3

Frame Depth

# Description20 20"26 26"

1

RU

RU Frame Height24 48.87"35 68.12"40 76.87"44 83.87"

Top Panel

# Description0 None1 Solid2 Vented3 Solid w/10" Fan

4 Solid w/(4) 4" Fans

Front Door

# Description0 None1 Glass Swing2 Solid Swing3 Perforated Swing

Rear Door


Side Panels

# Description1 Two (2) Integrated Solid Sides w/Venting

Note:

1) 19" rack mount PDUs will work on all XME Enclosure heights.

XME Enclosure, 44RU height, 20" depth, with 10" fan top

panel, glass swing front door, perforated swing rear door,

and two fixed vented side panels.


Faster.

Easier.

Better.


Vent KitsAllows for top vent to be blocked to optimize forced air cooling (fanned top).

XME

Vent Kit

SVC Side Vent Cover Kit. Plate to Block Off Vents in SideFVC Front Vent Cover Kit. Plate to Block Off Vents in Front

Front Mount Work SurfaceFor standard 19" mounting.

XMEW

Work Surface

22 1 Bay, 22"44 2 Bays, 44"

Rack Mount DrawersFor standard 19" mounting.

RMD

Recessed Caster Base

22 CB1

EIA Rail Kits — 1 Pair with Hardware

XMER RT10

Rail Height (Frame HT)

24 48" 40 76"35 67.5" 44 83"

Lacing Panel

24 24RU 40 40RU35 35RU 44 44RU

Drawer Height

2 2RU 4 4RU3 3RU 5 5RU


LP

XME Series — Media Enclosure Options and Accessories (continued)

Bro

ad

ca

st E

nclo

su

res a

nd

Ra

ck

s

Other Accessories


Lacing Accesories





Rack Mount Lacing Bar

Rack Mount Lacing Bar 9512-1903

Top Mounted Ladder Rack Support

Top-Mounted Ladder Rack Support XMELM

Adjoining Kit

(4) 1/4" Whiz Bolt and Whiz Nuts XMEBK01

Grounding Kit

Straps and 1/4" Wing Nuts XMEGK01

Edge Guard Kits

Edge Guard Kit XMEEG01


Seismic Anchor Bracket Kit XMERSB

EIA Rail Kits

Rack Mount Drawers

Quick Mount Swivel Base Fastener XMFCTM

Vent Kits

Base Depth

20 20"26 26"


48.87"–83.87"

Bro

ad

ca

st

En

clo

su

res a

nd

Ra

ck

s


• Available in four heights and three depths; taller units (48RU, 50RU and 52RU) available on demand

• 14-gauge, one-piece formed top and bottom; 16-gauge formed vertical corner posts

- 48.87" (24RU) to 83.87" (44RU) Height x 22" Wide x 26.5", 31.5" or 36" Deep

• EIA rail support is integral part of the top and bottom with spot-welded inner support channel

• Middle rail support channels are spot-welded construction of two 16-gauge formed rail channels, creating .12" thick support channels per side

• (4) 12-gauge EIA mounting rails (10-32 tapped)

• Reversible Doors: Frame available with optional front and rear solid, glass or perforated surface mount doors

• Side Panels: Surface mount removable side panels, adds 1/2" to overall width

• Top Panel: Solid, vented, with 10" fan or (4) 4" fans; depths of 26.5", 31.5" and 36"

• Side Cable Chase: 4" wide chase for added cable management; can be mounted between enclosures or used as side unit; will accept a side panel (44RU enclosures only)

• Caster Base: Recessed, depths of 26.5", 31.5" and 36"; adds 1" to frame height. Caster bases install directly to bottom flanges of enclosures; casters are recessed, allowing leveling legs to be lowered when enclosure is in position, and casters to be raised off floor

Cable Management

• Rear Access — Top: three antenna knockouts, each .62" dia. two conduit knockouts, .87" dia. and 1.12" dia. 9" x 2.25" opening with cover plate; Bottom: four conduit knockouts, two @ .87" dia., two @ 1.12" dia. 9" x 2.25" opening with cover plate

• Side Access — Top: 4" dia. knockout, located toward rear; Bottom: 4" dia. knockout, located toward rear; optional edge guard to protect the cable available

• Top Access — 1", 1.5" and 2" knockouts, located toward rear of top panel

• Lacing points on two surfaces of each rail support facilitate cable management

• Cable tie holes span entire length of EIA rail on attachment flange (spaced at 1.75")

• Cable tie bar made of formed steel, eliminates sharp edges; provides multiple attachment points; features cable bend radius control and lacing holes; factory mounted when tie bar option is selected

Color


Part No. shown: XMER443131320

(44RU H x 22" W x 31.5" D)

XMER Series - Media EnclosureFlexible and economical design for Broadcast, Commercial AV, Security

and Head End applications

Part No. shown: XMER44310000

(44RU H x 22" W x 31.5" D)

26.5", 31.5", or 36"

22"


• Open top with optional configurable panels

• Open bottom with leveling legs and hole pattern to bolt frame to floor; captive grounding studs in bottom sills



Faster.

Easier.

Better.

Bro

ad

ca

st E

nclo

su

res a

nd

Ra

ck

s

XMER 36 240 2

Frame Depth

# Description26 26"31 31"36 36"** 36"D N/A in 24RU Frame Height

2 3

XMER40362232Part number example:Ordering Matrix for XMER Series

RU

RU Frame Height24 48.87"35 68.12"40 76.87"44 83.87"

Top Panel

# Description0 None1 Solid2 Vented3 Solid w/10" Fan4 Solid w/(4) 4" Fans

Front Door

# Description0 None

1 Glass Swing

2 Solid Swing3 Perforated Swing

Rear Door


Side Panels

# Description0 None1 Flush Mount Side Panel, One2 Flush Mount Side Panels, Set

Tie Bar (optional)# Description

TB Tie Bar (also see notes)

Notes:

1) Tie bar option (TB) 24RU=8TB, 35–40–44RU=12TB.

2) 19" rack mount PDUs will work on all XMER Enclosure heights.

Top Panel Options Door OptionsCompatible with enclosure front or rear.

Side Panel OptionsSolid removable (single).

Refer to RU and FRAME DEPTH charts (above).

XMER Series — Options and Accessories

22 22TP

01SP

Panel Style

1 Solid2 Vented3 10" Fan4 (4) 4" Fans (320 CFM)

4-Q (4) 4" Fans, 25 dB (204 CFM)

Panel Depth

26 26.5"31 31.5"36 36"

Door Style

GD Tempered GlassSD SolidPD Perforated

Panel Height (RU)


Door Height (RU)


(4) 4" Fan10" Fan

VentedSolid

Doors

Solid Tempered

Glass

Perforated

Panel Depth

26 26.5"31 31.5"36 36"

XMER Enclosure, 40RU height, 36" depth, with vented top

panel, solid swing front door, perforated swing rear door,

and two solid side panels.


Bro

ad

ca

st

En

clo

su

res a

nd

Ra

ck

s


Front Mount Work SurfaceFor standard 19" mounting.

XMEW

Work Surface

22 1 Bay, 22"44 2 Bays, 44"

Rack Mount DrawersFor standard 19" mounting.

RMD


22 CB1

EIA Rail Kits — 1 Pair with Hardware

XMER RT10

Drawer Height

2 2RU 4 4RU3 3RU 5 5RU


LP

Lacing Panel

24 24RU 40 40RU35 35RU 44 44RU

XMER Series — Options and Accessories (continued)

Other Accessories


Lacing Accesories





Rack Mount Lacing Bar

Rack Mount Lacing Bar 9512-1903

Top-Mounted Ladder Rack Support

Top-Mounted Ladder Rack Support XMELM

Adjoining Kit

(4) 1/4" Whiz Bolt and Whiz Nuts XMEBK01

Grounding Kit

Straps and 1/4" Wing Nuts XMEGK01


Seismic Anchor Bracket Kit XMERSB

Rack Mount Drawers



EIA Rail Kits

Side Cable Chase (4" Wide)

44

Chase Depth

26 26.5" (RU44)31 31.5" (RU44)36 36" (RU44)

CC

Base Depth

26 26"31 31"36 36"

Rail Height (Frame HT)

24 48" 40 76"35 67.5" 44 83"

SECTION THREE

Components and Accessories

Components and Accessories 63-68

Enclosure Shelves 64

Horizontal Cable Management 65

Light Kits 66

Filler Panels 66

Grounding and Bonding 67

Mounting and Adjoining Hardware 67

Enclosure Access Systems 68


Large Selection of Rack and Enclosure Accessories to Meet Equipment Mounting, Cable Management, Grounding/Bonding and Access Control Challenges

Components and accessories designed for seamless compatibility with Belden racks and enclosures products.

• Cantilevered and 4-point mount shelf mounting options for non-rack mount components

• Organize and manage patch cords and cables with horizontal managers available in multiple sizes and capacities

• Optimize air separation for improved availability with solid and brushed filler panels

• Ensure installation security and electrical conformance with bonding and grounding products

• Meet active equipment mounting requirements with multiple mounting hardware products

• Access control for enclosures protects your physical assets and data

Remotely manage

server access

while maintaining

an indisputable

audit trail with

Belden Enclosure

Access Systems.


Enclosure Shelves19" Shelves

Features

• Compatible with 19" mount enclosures and racks (23" mount option available on request)

• Available in depths of 12" to 36" cantilevered or 4-point mount types

• Shelves include mounting hardware

• Load ratings range from 25 lbs to 200 lbs

• Standard shelf color is black (other colors are available on custom basis for volume orders)9010-1924

9010-1930

9011-1912

9011-1918 and

9011-1918-16

9012-1918 and

9012-1918-16

9010-1936 9015-1909


Description Depth* Load Rating Belden Part Number

19" Heavy-Duty Adjustable Shelf (Vented), 4-Point Mounting 24" 150 lbs 9010-1924

19" Heavy Duty Adjustable Shelf (Vented), 4-Point Mounting 30" 150 lbs 9010-1930

19" Heavy Duty Adjustable Shelf (Vented), 4-Point Mounting 36" 150 lbs 9010-1936

19" Flush Mount Cantilevered Shelf (Vented) – Compatible with 27.5" Deep Wall Mount Enclosures 12" 50 lbs 9011-1912

19" Flush Mount Cantilevered Shelf (Vented) 18" 50 lbs 9011-1918

19" Flush Mount Cantilevered Shelf (Vented) 18" 25 lbs 9011-1918-16

19" Flush Mount Cantilevered Shelf (Solid) 18" 50 lbs 9012-1918

19" Flush Mount Cantilevered Shelf (Solid) 18" 25 lbs 9012-1918-16

19" Heavy-Duty Sliding Adjustable Shelf (Vented), 4-Point Mounting 24" 100 lbs 9013-1924

19" Sliding Rotating Keyboard Shelf N/A N/A 9015-1909

Co

mp

on

en

ts a

nd

Ac

ce

sso

rie

s

Note: *Compatibility with enclosure frame size to be validated when selecting shelf depth.


Faster.

Easier.

Better.

Horizontal Cable Management

Application

Horizontal managers allow routing of copper and fiber cables/patch cords in racks and enclosures while helping to maintain proper bend radius and organize array for ease of moves, adds and changes.

Features include:

• 1RU to 4RU height

• 19" mount includes mounting hardware

• Compatible with racks and enclosures

• Selection of ring, finger and cable tie bar style horizontal managers

• Standard color is black (other colors available on volume orders)

Top: 9512-1901, Bottom: 9512-1902 9511-1902

Horizontal Managers

Description RU Manager Cross Section Belden Part Number

Horizontal Manager with Saddle Rings 1RU 1.65"H x 3"D 9510-1901

Horizontal Manager with Saddle Rings 2RU 3"H x 3"D 9511-1902

Horizontal Manager with Finger Stock and Cover 1RU 1.5"H x 2"D 9512-1901

Horizontal Manager with Finger Stock and Cover 2RU 3"H x 3"D 9512-1902N

Horizontal Manager with Finger Stock and Cover, Front & Rear 2RU 3"H x 3"D Front/Rear 9512-1902-FR

Horizontal Manager with Molded Fingers and Hinging Cover, Enclousure Application 1RU 1.75"H x 5.66"D BHH191UC

Horizontal Manager with Molded Fingers and Hinging Cover, Enclousure Application 2RU 3.5"H x 5.66"D BHH192UC

Horizontal Manager with Molded Fingers and Hinging Cover, Enclousure Application 3RU 5.25" x 5.66"D BHH193UC

Horizontal Manager with Molded Fingers and Hinging Cover, Enclousure Application 4RU 7" x 5.66"D BHH194UC

Horizontal Manager with Molded Fingers and Hinging Cover, Open Rack Application 1RU 1.75"H x 7.22"D BHH191UR

Horizontal Manager with Molded Fingers and Hinging Cover, Open Rack Application 2RU 3.5"H x 7.22"D BHH192UR

Horizontal Manager with Molded Fingers and Hinging Cover, Open Rack Application 3RU 5.25" x 7.22"D BHH193UR

Horizontal Manager with Molded Fingers and Hinging Cover, Open Rack Application 4RU 7" x 7.22"D BHH194UR

Horizontal Cable Tie Bar with 1.5" Deep Offset 1RU N/A HCB-1932-1.5-01

Horizontal Cable Tie Bar with 2.5" Deep Offset 2RU N/A HCB-1932-2.5-01

Horizontal Ring Style Manager, High Capacity, Open Rack Application 2RU 3.5"H x 6.8"D 9511-1902-01



Co

mp

on

en

ts a

nd

Ac

ce

sso

ries

9510-1901

BHH192UC Horizontal Manager

9511-1904-01


Co

mp

on

en

ts a

nd

Ac

ce

sso

rie

s

Light Kits

Filler Panels

Construction

• Light Kits are compatible with all 19" mount racks or enclosures

• Uses one (1) rack unit

• Includes 120V AC adapter and mounting hardware

Application

• Filler Panels allow blocking of unused rack units (RU) for optimized airflow and separation between cold supply air and hot return air

• Best practices in Data Centers includes blanking of all unused rack units (RU)

• Filler Panels are compatible with 19" mount racks and enclosures

9420-1906

9420-1905

Options


Dual Adjustable 5W Halogen Lights & Dimmer, UL Listed 9420-1905

Single Adjustable 5W Halogen Light & Dimmer, UL Listed 9420-1906

Steel Filler Panels

Plastic Filler Panel

XFPWB2U101

Brushed filler panel allows routing of cable from front to

rear while providing air flow separation. Panel is open

ended, allowing mounting without having to unplug cables.

Options

Filler Panels, Steel (includes Mounting Hardware)

1RU Solid Filler Panel Black/CO White 9910-0100-01/-02


2RU Solid Filler Panel with "Belden" Logo Silk Screen Black 9911-0201-01



8RU Solid Filler Panel Black/CO White 9914-0800-01/02

Filler Panels, Plastic Tool-Less

1RU Solid Filler Panel (fits 10-32, 12-24 and square holes rails) Black/CO White 9910-0100PL-01/-02

2RU Solid Filler Panel (fits 10-32, 12-24 and square holes rails) Black/CO White 9911-0200PL-01/-02

Filler Panels with Brush Pass Thru (includes Mounting Hardware)

1RU Filler Panel with Brush (open ended) Black/CO White XFPWB1U101/02




Description Color Belden Part Number


Faster.

Easier.

Better.

Co

mp

on

en

ts a

nd

Ac

ce

sso

ries

Grounding and Bonding

Mounting Hardware

Adjoining Hardware

Description Enclosure Series Belden Part Number

Enclosure Adjoining Kit (4) 5/16-18 Hex Head Bolt; (4) 5/16-18 Hex Nut; (8) 5/16 Flat Washer) XS, XN, XM,XSS, XNX 8910-0100

Enclosure Adjoining Kit for NEMA 12 (4) 5/16-18 Hex Head Bolt; (4) 5/16-18 Hex Nut; (8) 5/16 Flat Washer, includes Gasketing XNM XNM-0100

Bolt-Together Kit for XSF Frames (incl. hardware) XSF XSFBK01

Adjoining Kit (4) 1/4-20 x 5/8 Carriage Bolt; (4) 5/16 External Tooth Lock Washer; (4) Whizlock Nuts XMF XMFBK01

Loaded Rack Application Bolt Kit (4) 12-24 x 1 3/4 Screw; (8) External Tooth Washer; (4) 12-24 Hex Nuts; (4) .5 x .125"W Tubing Nylon XMF XMFBK02

Adjoining Kit (4) 1/4-20 x 5/8 Whizlock Bolt; (4) 1/4-20 Whizlock Nut XME, XMER XMEBK01

Joining Kit (4) 5/16 x 1 Bolt, (8) 5/16 Washers, (4) 5/16 Nuts — XBK01

AX102516 Cable Slack Management Ring - 12" diameter

Application

Included adjoining hardware for ganging of racks and enclosures, plus a variety of bolts, screws and nuts for mounting of active and passive networking devices into enclosures and racks.

10-32 Hardware 10-32 Mounting Screws 50 8911-0100

10-32 Cage Nuts (for use with square hole rails) 50 8915-0100


10-32 Clip Nuts 20 8915-0320

12-24 Hardware 12-24 Mounting Screws 50 8917-0100


12-24 Clip Nuts 20 8917-0320

M6 Hardware M6 Cage Nut (for use with square hole rails) 50 8913-0100

M6 Cage Nut (for use with square hole rails) 20 8913-0220

M6 Clip Nut 20 8913-0320

M6 x 16 mm Mounting Screw 50 8914-0100

Cable Ties Velcro Cable Ties, 8"L x 0.5"W, 25 per Roll 25 AX100783

Velcro Cable Ties, 12"L x 0.5"W, 25 per Roll 25 AX100784

12" Fiber Optic Cable Manager 1 AX102516

24" Fiber Optic Cable Manager 1 AX102517

Quick Mount Velcro Saddle with Fastener 10 XMFCTM

Description Quantity/Package Belden Part Number

Notes: Bonding strap kit is included with enclosure doors, sides and top panels. Grounding lug kit is for use with rack and enclosure welded ground studs.

Note: Adjoining hardware is included with the enclosures.

.250Thick

17.250Long

1.0010-32 Holes

1.00 Wide

19" mount grounding bar is 0.25" thick x 1.25" wide, with

#10-32 tapped holes; isolating mounts with hardware are

included.

9714-0190

Options


19" Horizontal Isolated Copper Ground Bar, .25" Thickness x 1" W, Tapped 10-32 9714-0190

Grounding/Bonding Strap Kit (11" strap with hardware) XBS-11-0001

Grounding/Bonding Strap Kit (18" strap with hardware) XBS-18-0002

Grounding/Bonding Strap Kits

Bonding Strap Kit (11" strap with hardware and anti-oxidation compound) XBS-11-0001

Bonding Strap Kit (18" strap with hardware and anti-oxidation compound) XBS-18-0001

Grounding Lug Kit (Ground Lug and 1/4-20 Kep Nut) 20128-KIT


zC

om

po

ne

nts

an

d A

cc

esso

rie

s

Enclosure Access Sytems

Application

Physical assets protection/access is key to IT operations, such as Data Centers, Enterprise and Remote Computing locations. Belden enclosures can be equipped with a variety of locking handles, including state-of-the-art enclosure access control and management solutions, allowing conformance to privacy rules and regulations (PCI DSS, HIPAA, FISMA and more).

Features

• Centralized administration of up to thousands of units

• Real-time monitoring and alerts

• Indisputable audit trails

• Enclosures or row/pod level access

• Flexibility to choose between fingerprint or RFID card access

Stand alone enclosure access systems are for smaller or distributed installations. Each cabient has a dedicated controller and biometric (BioLock) or card reader (CardLock) used for user authentification.

In a networked enclosure access sytem, a central controller distributes control signals and power to up to 32 enclosures when authenticating at the enclosure level and 31 enclosures when authenticating at the end of row. For enclosure level authentication, choose between fingerprint (BioLock) or RFID card (CardLock). For end-of-row authentication, the user enters which enclosure door they are attempting to access, then uses any combination of PIN, RFID card and fingerprint to authenticate.

Locking Swing Handles

Swing Handle (1) w/Common CH-751 Lock Cylinder/Key, w/Belden Logo Silk Screen 8815-0100

Swing Handle (1) w/Special Non CH-751 Lock Cylinder/Key, w/Belden Logo Silk Screen 8815-0101

Swing Handle (1) w/Key Lock and Padlock Loop (1), Padlock Not Included 8815-0102

Swing Handle (1) w/3 Digit Combination Lock and Key Overide 8815-0103

Smart Lock/Access System

BUS Controller, includes 48 VDC PSU, 2 x 14' CAT 6 Cable 8815-0200

End of Rows Reader

BUS Enline Reader w/PIN and Fingerprint 8815-0210

BUS Enline Reader w/PIN, Fingerprint and HID ICLASS 13.56 MHz 8815-0211

BUS Enline Reader w/PIN, Fingerprint and HID 125 KHz 8815-0212

Enclosures Level & Row Level Access Systems - Networked application

Enclosure Node w/1 Biolock Swing Handle 8815-0221

Enclosure Node w/1 Biolock and 1 Elock Swing Handle 8815-0222

Enclosure Node w/2 Biolocks Swing Handle 8815-0223

Enclosure Node w/1 Cardlock Swing Handle 8815-0224

Enclosure Node w/1 Cardlock and 1 Elock Swing Handle 8815-0225

Enclosure Node w/2 Cardlocks Swing Handle 8815-0226

Enclosure Node w/1 Elock Swing Handle 8815-0227

Enclosure Node w/2 Elocks Swing Handle 8815-0228

Enclosures Level Access Systems - Stand alone application

Access Controller w/1 Cardlock, 18.5 V PSU, 1 Door Switch 8815-0240

Access Controller w/1 Cardlock, 1 Elock, 18.5 V PSU, 2 Door Switches 8815-0241

Access Controller w/2 Cardlocks, 18.5 V PSU, 2 Door Switches 8815-0242

Access Controller w/1 Biolock, 18.5 V PSU, 1 Door Switch 8815-0243

Access Controller w/1 Biolock, 1 Elock, 18.5 V PSU, 2 Door Switches 8815-0244

Access Controller w/2 Biolocks, 18.5 V PSU, 2 Door Switches 8815-0245

Software - Access Interface and Management

Server/Client Software for Connection up to 10 Enclosures 8815-0280




Electronic Slide Handle

Electronic Slide Handle (TZ compatible) with Multiport Link & Lock Cylinder 8815-0104


Note:Includes door switch(es) and 14' of Cat 6 cables.

8815-0210 BUS Enline Reader w/PIN and Fingerprint

BioLock ELock

Access control with authentication done at each enclosure

Access control with authentication done at end of row

of enclosure

SECTION FOUR

Power Distribution & Climate Monitoring

Power Distribution & Climate Monitoring 69-78

Enclosure Power Distribution Units (PDUs) 70–71

Single-Phase Basic/Smart PDUs 72

3-Phase Basic/Smart PDUs 73

Single- and 3-Phase Switched PDUs 74

PDU Accessories — Mounting, Cord Management and Cord Set 75

PDU Configuration Guide 76

Plug and Receptacle Configuration Chart 77

Environmental Monitors and Sensors 78


Power Availability, Distribution, Allocation and Monitoring are Critical Data Center and Broadcast Studio Requirements

Belden in-enclosure mounted Power Distribution Units (PDUs) and Environment Monitors and Sensors are designed from high-quality components to support all your mission critical applications.

A key component of our Data Center Ready Solution (DCRS), Belden PDUs allow configuration of integrated and optimized hosting systems, including fiber/copper connectivity and cabling, enclosures, cable management and air flow management. They are designed to facilitate seamless integration into Belden enclosures and racks, and include multiple mounting options for maximized air flow and cable management in high-density servers or switch hosting applications.

Paired with our extensive line of environmental monitors and sensors, which include alarm thresholds, reporting functionality, and a built-in intuitive web interface for remote access, Belden has everything you need to precisely monitor, analyze and log key parameters, enabling you to identify current fluctuations and quickly troubleshoot potential problems.

*Lacing-PDU mounting panels (p.75) are not included with the enclosures or the PDU's and need to be ordered separately. PDU's/panels uses tool less "button" style mounting.

Precisely distribute,

monitor, analyze

and manage power

distribution in your facility

to maximize processing

capacity and promote

power efficiency.


Po

wer

Dis

trib

uti

on

& C

lim

ate

Mo

nit

ori

ng

Enclosure Power Distribution Units (PDUs)

Belden PDU Options and Features

• All Belden PDUs are UL and cUL listed 60650

• Select from a wide offering of PDUs designed to meet your specific power requirements; single phase, 3-phase (WYE and Delta configurations)

• Over 500 standard PDUs available to ship within 10 days of ordering, or custom PDUs available to ship within 20 days of ordering

• C-13 and C-19 receptacles with optional locking feature for mission critical applications

– Unplugging cords requires simple “push” of release button

– Locking mechanism binds to the ground pin on the plug and is compatible with standard IEC cord, thus eliminating the need for expensive proprietary cords

Organized networking and power cable management for

proper server airflow

Inside View of Locking Mechanism

Power Amp Voltage Phase Plug

3.3kW 20A 250V 1 Phase L6-20P or 2P, 3W

5kW 30A 250V 1 Phase L6-30P or 2P, 3W

11kW 20A 230/400V 3 Phase WYE L22-20P or 4P, 5W

16.6kW 30A 230/400V 3 Phase WYE L22-30P or 4P, 5W

1.4kW 15A 125V 1 Phase 5-15P or L5-15P

1.9kW 20A 125V 1 Phase 5-20P or L5-20P

2.8kW 30A 125V 1 Phase L5-30P

5.7kW 20A 120/208V 3 Phase WYE L21-20P

8.6kW 30A 120/208V 3 Phase WYE L21-30P

8.6kW 30A 250V 3 Phase Delta L15-30P

17.2kW 60A 208V 3 Phase Delta 3P/4W

23kW 80A 208V 3 Phase Delta Hard Wired

34kW 120A 208V 3 Phase Delta Hard Wired

Locking Receptacles

Side-by-side PDU mounting using 7" wide PDU mounting

panel (Part No. XVMP024501)

XN Series enclosures with end-of-row and in between 6" extensions


Faster.

Easier.

Better.

Notes:

(1) Local current/amp meter, monitoring at circuit level for multi-circuit PDU.

(2) Local power meter provides Amps, Volts, Watts, Volt-Amps, kWh and Power Factor.

(3) Remote functions (IP-based) accessible via web browser.

(4) Remote IP-based environmental monitoring, (2) port per PDU. Requires external sensor, refer to accessories (p. 78) for selection.

(5) Remote IP-based receptacle level monitoring, Amps, Volts, Watts, kWh.

(6) Remote IP-based receptacle level switching (on/off) with configurable time delay.

Intelligent-Remote Monitoring (3)

Belden PDU TypeLocal Display/

MonitoringCurrent

Power Circuit

Level

Environmental

Port (4)

Power Outlet

Level (5)

Outlet

Switched (6)

Basic (B) No No No No No No

Local (L) Yes No No No No No

Current (C) Yes (1) Yes No No No No

Power (P) Yes (2) Yes Yes Yes No No

Power Outlet (O) Yes (2) Yes Yes Yes Yes No

Switched (S) Yes (2) Yes Yes Yes Optional Yes

Po

wer D

istrib

utio

n &

Clim

ate

Mo

nito

ring

Enclosure Power Distribution Units (PDUs) (continued)

PDU Selection: Basic, with Local

Monitoring and Intelligent

• PDU mounted display option for local current or power monitoring, making phase balancing easier (the PDU itself is not phase balancing)

Intelligent PDU Options and Features

• Remote aggregate, circuit or receptacle power monitoring for granular PUE measurement

• Switched (on/off) options allow remote outlet management and equipment reboot with sequential delay features; avoid power interruption due to inrush current, equipment start up in desired sequence

• Highly secure access with admin, control and view-only accounts

• Intuitive Ethernet-based firmware with email alarm or SNMP trap features prevents downtime with early notification of power threshold breaches

• SNMP (MIB) enabled for compatibility with all leading DCiM packages

• Integrated environmental monitoring capabilities; monitor temperature, air flow, humidity and dew point via optional connected sensors

• Internal memory for up to two week of trending of critical parameters for clear understanding of power allocation and usage

PDU Firmware, Trending Page

PDU Firmware, Alarm Setting Page

Intelligent PDU Communication and Environmental

Monitoring Ports

PDU Nameplate

Current Rating (A)

Branch Circuit

Rating (A)

Nameplate

Volts (V)

Volts Actual

Delivered (V)Phase*

PDU Nominal

Power Watts (W)

PDU De-Rated

Power (W)

PDU De-Rated

Power (kW)

PDU De-Rated

Power (BTU/hr.)

AC Tons**

(BTU/12000)

Air Volume***

(120 CFM* kW)

12 15 125 120 1 1,800 1,440 1.4 4,916 0.41 168

16 20 125 120 1 2,400 1,920 1.9 6,555 0.55 228

24 30 125 120 1 3,600 2,880 2.9 9,832 0.82 348

16 20 250 208 1 4,160 3,328 3.3 11,362 0.95 396

24 30 250 208 1 6,240 4,992 5.0 17,043 1.42 600

35 50 250 208 1 10,400 7,280 7.3 24,854 2.07 876

48 60 250 208 1 12,480 9,984 10.0 34,085 2.84 1,200

16 20 230 230 1 4,600 3,680 3.7 12,564 1.05 444

24 30 230 230 1 6,900 5,520 5.5 18,845 1.57 660

48 60 230 230 1 13,800 11,040 11.0 37,691 3.14 1,320

16 20 120/208 208 3 7,197 5,757 5.8 19,656 1.64 696

24 30 120/208 208 3 10,795 8,636 8.6 29,484 2.46 1,032

35 50 120/208 208 3 17,992 12,594 12.6 42,997 3.58 14,712

48 60 120/208 208 3 21,616 17,293 17.3 58,968 4.91 2,076

80 100 120/208 208 3 36,027 28,821 28.8 98,279 8.19 3,456

100 125 120/208 208 3 45,033 36,027 36.0 122,849 10.24 4,320

120 150 120/208 208 3 54,040 43,232 43.2 147,419 12.28 5,184

16 20 230/400 230 3 13,856 11,085 11.0 37,691 3.14 1,320

24 30 230/400 230 3 20,785 16,628 16.6 56,563 4.71 1,992

*3-Phase power is calculated by multiplying single phase by the square root of 3 or 1.73.

**Tons of air conditioning required to remove heat from associated IT load.

***The volume of air that is typically required by the IT equipment for each kW of IT load can typically range from 80 to 140 CFM. 120 CFM was used for calculation.

Power, Cooling and Air Handling Relations


Po

wer

Dis

trib

uti

on

& C

lim

ate

Mo

nit

ori

ng

Single-Phase PDUs

UL Listed Single-Phase PDUs

Type: B = Basic; L = Local Monitored

Rear View 9LF1-101001Front View 9LF1-101001

9LB2-301001

UL Listed Single-Phase PDUs

Type: P = Remote Power Monitored; O = Outlet Monitored

Notes:

(1) Standard cord length is 10 ft. For other lengths, change dd digit in part # (ex: 9PB2-30dd01 would be 9PB2-300801 = 8 ft). Available in 2, 4, 6, 8, 10, 15, 20 ft.

(2) Standard cord exits from chassis face; top of chassis exit available on request.

(3) C-13L, L refers to receptacles with locking feature.

(4) Standard PDU chassis color is black, custom color overlay available on request.

(5) These PDUs have no Surge Supression.

Notes:




Belden Part # TypeDe-Rated

Power (kW)

Amps (A)/

Volts (V)

Plug

Type

Total

ReceptacleReceptacle Type/Qty

Thermal

Circuit Breaker

On-Off

Switch

Surge

Supression

Monitoring-

Local

Mounting

(4)

Dimensions

L x W x D (in.)

9BF1-061001 B 1.4 15/120 5-15P 6 5-15R/6 Yes Yes No No Rack - 19" 17 x 1.72 x 3.75

9BF1-061002 B 1.4 15/120 5-15P 6 5-15R/6 Yes Yes Yes No Rack - 19" 17 x 1.72 x 3.75

9BF1-081001 B 1.4 15/120 5-15P 8 5-15R/8 Yes Yes No No Vertical 24 x 1.61 x 1.61

9LF1-101001 L 1.4 15/120 5-15P 10 5-15R/10 Yes Yes No Power Rack - 19" 17 x 1.72 x 4.5

9BF1-141001 B 1.4 15/120 5-15P 14 5-15R/14 Yes Yes Yes No Vertical 47.5 x 1.61 x 1.61

9BG2-081001 B 1.9 20/120 L5-20P 8 5-20R/8 Yes Yes No No Vertical 24 x 1.61 x 1.61

9BG1-101001 B 1.9 20/120 5-20P 10 5-20R/10 Yes Yes Yes No Rack - 19" 17 x 1.72 x 3.75

9LG1-101001 B 1.9 20/120 5-20P 10 5-20R/10 Yes No No Power Rack - 19" 17 x 1.72 x 4.5

9BG1-141001 B 1.9 20/120 5-20P 14 5-20R/14 Yes Yes No No Vertical 47.5 x 1.61 x 1.61

9BG2-141001 B 1.9 20/120 L5-20P 14 5-20R/14 Yes Yes No No Vertical 47.5 x 1.6.1 x 1.61

9BG1-141002 B 1.9 20/120 L5-20P 14 5-20R/14 Yes No Yes No Vertical 47.5 x 1.6.1 x 1.61

9BG2-141002 B 1.9 20/120 L5-20P 14 5-20R/14 Yes No Yes No Vertical 47.5 x 1.6.1 x 1.61

9LH2-241001 L 2.8 30/120 L5-30P 24 5-20R/24 Magnetic Breaker No Power Vertical 66.25 x 2 x 2

9LB2-121001 L 5 30/208 L6-30P 12 C-13/12 Magnetic Breaker No Power Rack - 19" 17 x 1.72 x 6.5

9LB2-301001 L 5 30/208 L6-30P 30 C-13/24 + C-19/6 Magnetic Breaker No Power Vertical 66.25 x 2 x 2


Power (kW)

Amps (A)/

Volts (V)

Plug

Type

Total

Receptacle

Receptacle

Type/Qty

Thermal

Circuit Breaker

On-Off

Switch

Monitoring-Local/

Remote

Environmental

Monitoring

Mounting

(4)

Dimensions

L x W x D (in.)

9PG2-101001 P 1.9 20/120 5-20P 10 5-20R/10 + 0 Magnetic No Power/Aggregate Yes - 2 Port Rack - 19" 17 x 1.72 x 6.5

9PB2-301001 P 5 30/208 L6-30P 30 C-13/24 + C-19/6 Magnetic Breaker Power/Circuit Breaker Yes - 2 Port Vertical 66.25 x 2 x 2.25

9PB2-301002 P 5 30/208 L6-30P 30 C-13L/24 + C-19L/6 Magnetic Breaker Power/Circuit Breaker Yes - 2 Port Vertical 72 x 2 x 2.25

9PB2-421001 P 5 30/208 L6-30P 42 C-13/36 + C-19/6 Magnetic Breaker Power/Circuit Breaker Yes - 2 Port Vertical 70 x 2 x 2.25

9OB2-241001 O 5 30/208 L6-30P 24 C-13L/18 + C-19L/6 Magnetic BreakerPower/Circuit Breaker

+ OutletYes - 2 Port Vertical 72 x 2.25 x 2.25

9OB2-241001

Front View 9PG2-101001 Rear View 9PG2-101001


Faster.

Easier.

Better.

Po

wer D

istrib

utio

n &

Clim

ate

Mo

nito

ring

3-Phase PDUs

UL Listed 3-Phase PDUs

Type: C = Remote Current Monitored; P = Power Monitored; O = Outlet Monitored


Power (kW)

Amps (A)

x Phases

Input Volts (V)/

Output Volts (V)

Plug

Type

Total

Receptacle

Receptacle

Type/Qty(s)

Circuit Breaker

(Amp/Qty)

Monitoring-

Local/RemoteMounting

Dimensions

L x W x D (in.)

9LI2-301001 L 5.7 20 x 3 Ph. 120/208 WYE/208 L21-20P 30 C-13/24 + C-19/6 No Amp (X,Y,Z)/No Vertical66.25 x 2 x 2

Dog House - No

9LJ2-301001 L 8.6 30 x 3 Ph. 120/208 WYE/208 L21-30P 30 C-13/24 + C-19/6 20/3D Amp (X,Y,Z)/No Vertical66.25 x 2 x 2

Dog House - No

9BJ2-331001 B 8.6 30 x 3 Ph. 120/208 WYE/120 & 208 L21-30P 33C-13/24 + C-19/3 +

5-20R/620/3D Amp (X,Y,Z)/No Vertical

66.25 x 2 x 2

Dog House - No

9LC2-301001 L 11 20 x 3 Ph. 230/400 WYE/230 L22-20P 30 C-13/24 + C-19/6 No Amp (X,Y,Z)/No Vertical66.25 x 2 x 2

Dog House - No

9LC3-301001 L 11 20 x 3 Ph. 230/400 WYE/230 4P, 5W 30 C-13/24 + C-19/6 No Amp (X,Y,Z)/No Vertical66.25 x 2 x 2

Dog House - No

9LD2-301001 L 16.6 30 x 3 Ph. 230/400 WYE/230 L22-30P 30 C-13/24 + C-19/6 20/3D Amp (X,Y,Z)/No Vertical66.25 x 2 x 2

Dog House - Yes

9LD3-301001 L 16.6 30 x 3 Ph. 230/400 WYE/230 4P, 5W 30 C-13/24 + C-19/6 20/3D Amp (X,Y,Z)/No Vertical66.25 x 2 x 2

Dog House - Yes

9BL3-121001 B 17.3 60 x 3 Ph. 208 Delta/208 3P, 4W 12 C-19/12 + 0 20/6 Breaker/No Rack - 19"17 x 3.4 x 9

Dog House - No

9BL3-241001 B 17.3 60 x 3 Ph. 208 Delta/208 3P, 4W 24 C-13/12 + C-19/12 20/6 Breaker/No Vertical66.25 x 2.3 x 3.45

Dog House - No


Power (kW)

Amps (A)

x Phases

Input Volts (V)/

Output Volts (V)

Plug

Type

Total

Receptacle

Receptacle

Type/Qty(s)

Circuit Breaker

(Amp/Qty) (4)

Monitoring-

Local/Remote

Environ.

Monitoring

Dimensions

L x W x D (in.)

9PC2-441001 P 5.8 20 x 3 Ph. 120/208 WYE/208 L21-20P 44C-13/36 + C-19/6 +

5-20R/2No Power/X, Y, Z Yes - 2 Port

70 x 2 x 2.25

Dog House - No

9CJ2-301001 C 8.6 30 x 3 Ph. 120/208 WYE/208 L21-30P 30 C-13/24 + C-19/6 20/3D Current/Current No66.25 x 2 x 2

Dog House - Yes

9OJ2-301001 O 8.6 30 x 3 Ph. 120/208 WYE/208 L21-30P 30 C-13L/24 + C-19L/6 20/3DPower/X, Y, Z +

OutletYes - 2 Port

72 x 2.25 x 2.25

Dog House - Yes

9OC2-241001 O 11 20 x 3 Ph. 230/400 WYE/230 L22-20P 24 C-13L/18 + C-19L/6 NoPower/X, Y, Z +

OutletYes - 2 Port

66.25 x 2 x 2

Dog House - No

9OD3-241001 O 16.6 30 x 3 Ph. 230/400 WYE/230 4P, 5W 24 C-13L/18 + C-19L/6 20/6Power/X, Y, Z +

OutletYes - 2 Port

72 x 2.25 x 2.25

Dog House - Yes

9PL3-301001 P 17.3 60 x 3 Ph. 208 Delta/208 4P, 4W 30 C-13/24 + C-19/6 20/6D Power/X, Y, Z Yes - 2 Port72 x 2.3 x 3.45

Dog House - No

UL Listed 3-Phase PDUs

Type: B = Basic; L = Local Monitored

Notes:




(4) Ex: 20/3D, D refers to double pole breakers (20A in this case).


(6) These PDUs have no Surge Supression or On/Off Switch.

(7) PDU “Dog House” hosts the circuit breaker and protrude from the PDU chassis by 1.44".

(8) All these 3-Phase PDUs are vertically mounted.

9LI2-301001

ZPB248-106IBBPS15

9PC2-441001

9OJ2-301001

Notes:






(6) These PDUs have no Surge Supression or On/Off Switch.



Po

wer

Dis

trib

uti

on

& C

lim

ate

Mo

nit

ori

ng

Single- and 3-Phase PDUs

UL Listed Single- and 3-Phase PDUs

Type: S = Remotely Switched

9SJ2-241001 9SJ2-241002

Notes:

(1) Standard cord length is 10 ft. For other lengths, change dd digit in part # (ex: 9PB2-30dd01 would be 9PB2-300801 = 8 ft). Available in 2, 4, 6, 8, 10, 15, 20 ft. 9SG1-081002 Power Cord is sold separately.





(6) These PDUs have no On/Off Switch or Surge Supression.


(8) All these Single- and 3-Phase PDUs have a Switched Outlet and a 2-port Environmental Monitor.


Power (kW)

Amps (A)

x Phases

Input Volts (V)/

Output Volts (V)

Plug

Type

Total

Receptacle

Receptacle Type/

Qty(s)

Circuit Breaker

(Amp/Qty) (4)

Monitoring-Local/

Remote

Mounting

(5)

Dimensions

L x W x D (in.)

9SG1-081001 S 1.9 20 120/120 5-20P 8 5-20R/8 No Power/Agg Power Rack - 19"17 x 1.72 x 8.5

Dog House - No

9SG1-081002 S 1.9 or 3.3 20 120 or 208/120 or 208 C-20 8 C-13L/8 No Power/Agg + Outlet Rack - 19"17 x 1.72 x 8.5

Dog House - No

9SB2-241001 S 5 30 208/208 L6-30P 24C-13L/20 +

C-19L/420/2D Power/Agg, Circuit, Outlet Vertical

70 x 2.5 x 2.25

Dog House - Yes

9SJ2-241001 S 8.6 30 x 3 Ph. 120/208 WYE/208 L21-30P 24C-13L/18 +

C-19L/620/3D Power/Agg, Circuit Vertical

70 x 2.5 x 2.25

Dog House - Yes

9SJ2-241002 S 8.6 30 x 3 Ph. 120/208 WYE/208 L21-30P 24C-13L/18 +


70 x 2.5 x 2.25

Dog House - Yes

9SC3-241001 S 11 20 x 3 Ph. 230/400 WYE/230 3P, 4W 24C-13L/21 +

C-19L/3No Power/Agg, Circuit Vertical

66.25 x 2.5 x 2.25

Dog House - No

9SC3-241002 S 11 20 x 3 Ph. 230/400 WYE/230 3P, 4W 24C-13L/21 +

C-19L/3No Power/Agg, Circuit, Outlet Vertical

66.25 x 2.5 x 2.25

Dog House - No

9SC2-241001 S 11 20 x 3 Ph. 230/400 WYE/230 L22-20P 24C-13L/21 +

C-19L/3No Power/Agg, Circuit Vertical

66.25 x 2.5 x 2.25

Dog House - No

9SC2-241002 S 11 20 x 3 Ph. 230/400 WYE/230 L22-20P 24C-13L/21 +

C-19L/3No Power/Agg, Circuit, Outlet Vertical

66.25 x 2.5 x 2.25

Dog House - No

9SD3-241001 S 16.6 30 x 3 Ph. 230/400 WYE/230 4P, 5W 24C-13L/21 +

C-19L/320/6 Power/Agg, Circuit Vertical

72 x 2.5 x 2.25

Dog House - No

9SD3-241002 S 16.6 30 x 3 Ph. 230/400 WYE/230 4P, 5W 24C-13L/21 +

C-19L/320/6 Power/Agg, Circuit, Outlet Vertical

72 x 2.5 x 2.25

Dog House - No

9SD2-241001 S 16.6 30 x 3 Ph. 230/400 WYE/230 L22-30P 24C-13L/21 +

C-19L/320/6 Power/Agg, Circuit Vertical

72 x 2.5 x 2.25

Dog House - No

9SD2-241002 S 16.6 30 x 3 Ph. 230/400 WYE/230 L22-30P 24C-13L/21 +

C-19L/320/6 Power/Agg, Circuit, Outlet Vertical

72 x 2.5 x 2.25

Dog House - No

9SL3-241002 S 17.2 60 x 3 Ph. 208 Delta/208 3P, 4W 24C-13L/18 +

C-19L/620/6D Power/Agg, Circuit Vertical

66.25 x 4 x 3.45

Dog House - No

9SL3-241002 S 17.2 60 x 3 Ph. 208 Delta/208 3P, 4W 24C-13L/18 +


66.25 x 4 x 3.45

Dog House - No

Rear View 9SG1-081002Front View 9SG1-081002


Faster.

Easier.

Better.

Po

wer D

istrib

utio

n &

Clim

ate

Mo

nito

ring

PDU Accessories — Mounting, Cord Management and Cord Set


Tool-Less PDU Mounting Panel (for XM and XS Style Enclosures)

Lacing-PDU Mounting Panel, 3.5"W, 42RU, Black XVMP014201



Lacing-PDU Mounting Panel, 7"W, 42RU, Black XVMP024201



Lacing-PDU Mounting Panel, 3.5"W, 42RU, White XVMP014202



Lacing-PDU Mounting Panel, 7"W, 42RU, White XVMP024202



Tool-Less PDU Mounting Panel (for XN Style Enclosures)

PDU Mounting Bracket Double, Post Mounting 2 PDU Side-by-Side Facing Into Enclosure XNPM01

PDU Mounting Bracket Single, Rear Facing Pair XNPM02

PDU Mounting Bracket Rear Facing Pair Between Frames XNPM03

PDU Mounting Bracket Rear Facing Pair Between Frames with Extension XNPM04

Vertical Manager Panel, 42RU X 7.0"W, Black XNVLP42901



Vertical Manager Panel, 42RU X 7.0"W, CO White XNVLP42902



Tool-Less PDU Mounting Panel (for XSS Seismic Enclosures)

Cable PDU Manager Rear Panel, 44RU, Rear, Black XSN44VRPM101




Tool-Less PDU Mounting Panel (for XSN Seismic Enclosures)

Cable PDU Manager Rear Panel, 44RU, Rear, Black XSN44VRPM101




Power Cord Management

Cable Management Ring Plastic (Qty = 5) 3" x 1.5" Reversible XMR01

Cable Management Ring Kit (Qty = 5) 2.5"W x 3"D XMR03

Slack Management Spool Kit (includes 2 spools) XSK020

Quick Mount Base (Qty=10) with Fastener, for 1/4" Holes XCTM

Velcro Cable Ties, 25 per Roll, 8" L x 0.5"W AX100783

Velcro Cable Ties, 25 per Roll, 12" L x 0.5"W AX100784

Cord Set* (C13/C19, C19/C20 - UL - cUL Listed)

C13 to C14 Non-Locking Cord Set - Y" Long — Black CSC13C14yyBK

C13 to C14 Non-Locking - 36" Long — Black CSC13C1436BK


C19 to C20 Non-Locking Cord Set - Y" Long — Black CSC19C20yyBK



C13 Locking to C14 - 20" Long — Blue CSLC13C1420BL

C13 Locking to C14 - 20" Long — Orange CSLC13C1420OR







Mounting Brackets

Locking Cord Set*

Cable Management Ring

(Plastic)

Quick Mount Base

7" Lacing-PDU

mounting panel

3.5" Lacing-PDU

mounting panel

*Built within the plug housing on the female end (C13/C19) of the cord, the patented integrated locking mechanism is protected against vibration and external elements that can easily dislodge other plug securing solutions, like external locking clips and guides. This self-contained locking mechanism engages with any standard IEC male connector (C14/C20). The cord locking feature is only available at the device-end of the cord sets. A power strip with locking receptacles must be available to secure these cords to the PDU.

Notes: yy = 12, 24, 36 ... 96 = cord length 12 to 96 inches; 12 inch increments.


Po

wer

Dis

trib

uti

on

& C

lim

ate

Mo

nit

ori

ng

Power Distribution Unit Configuration GuidePlease select the desired configuration and specifications

and submit to Belden.

Electrical Configuration

Power Input

Quantity** Plug Type Input AMPS Input VOLTS

5-15P 15 125

L5-15P 15 125

5-20P 20 125

L5-20P 20 125

6-20P 20 250

L6-20P 20 250

L14-20P 20 125/250

L21-20P 20 x 3~ 120/208 WYE

L5-30P 30 125

L6-30P 30 250

L14-30P 30 125/250

L15-30P 30 x 3~ 250 Delta

L21-30P 30 x 3~ 120/208 WYE

IEC C-20 Inlet

(No Cord)20/16* 125 or 250

IEC Pin & Sleeve

2 Pole/3 Wire20/16* 250/230*

IEC Pin & Sleeve

3 Pole/4 Wire20 250 3~

IEC Pin & Sleeve

2 Pole/3 Wire30/32* 250/230*

IEC Pin & Sleeve

3 Pole/4 Wire30 250 3~

IEC Pin & Sleeve

2 Pole/3 Wire60/63* 250/230*

IEC Pin & Sleeve

3 Pole/4 Wire60 250 3~

Cord Length

Power Input

Quantity Receptacle Type AMPS VOLTS

5-15R Duplex 15 125

5-15R Individual 15 125

L5-15R Duplex 15 125

5-20R Duplex 20 125

5-20R Individual 20 125

L5-20R 20 125

6-20R Duplex 20 250

L6-20R 20 250

L5-30R 30 125

L6-30R 30 250

IEC C-13 15/10* 125 or 250

IEC C-19 20/16* 125 or 250

Other - Please Specify

Physical ConfigurationDimensional Limits Mounting Orientation

Length Horizontal

Width Vertical

Height

Hardwire OptionsQuantity**

6" Wire Tails with Removable Plate

Flexible Conduit

Terminal Block

Power Switch Surge Supression

No No

Yes Yes

Yes - with Cover

MonitoringCurrent Local Current Remote

No No

Yes -

Current (Amps) Only

Yes -

Circuit Level

Yes - Scrolling Display

(Volts, Amps, Watts,

Power Factor)

Yes -

Outlet Level

Environmental Remote Switching

No No

Yes Yes

Circuit Breakers Isolated GroundNo (required by NEC in

some units)No

Yes Yes

3rd Party Testing - Compliance

UL® ListedUR - UL®

Recognized

FCC Part 15 Class A CE®

None RequiredOther -

Please Specify

Additional Information

Notes:

*Rating for CE Products

**Quantity = # of Circuits

Power Availability

Quantity Required

First Unit Required by Date

Phone

Target Price

Comparable Competitive Unit Brand/Model#

E-mail

Project Timeline


Faster.

Easier.

Better.

Po

wer D

istrib

utio

n &

Clim

ate

Mo

nito

ring

Plug and Receptacle Configuration Chart

NEMA Plugs and Receptacles

IEC Plugs and Receptacles

AMP VOLTS Power Inlet Power Receptacle AMP VOLTS Power Inlet Power Receptacle

15/10* 125 or 250 C-14 C-13 20/16* 125 or 250 C-20 C-19

AMP VOLTS Pin & Sleeve AMP VOLTS Pin & Sleeve

20/16* 250/230* 2P, 3W 2P, 3W 60/63* 250/230* 2P, 3W 2P, 3W

20 250 3P, 4W 3P, 4W 60 250 3P, 4W 3P, 4W

30/32* 250/230 2P, 3W 2P, 3W 20/16* 230/400* x 3~ WYE 4P, 5W 4P, 5W

30 250 3P, 4W 3P, 4W 30/32* 230/400* x 3~ WYE 4P, 5W 4P, 5W

AMP VOLTS Straight-Blade Plug Straight-Blade Receptacle AMP VOLTS Straight-Blade Plug Straight-Blade Receptacle

15 125 5-15P 5-15R 20 250 6-20P 6-20R

20 125 5-20P 5-20R

AMP VOLTS Twist-Lock Plug Twist-Lock Receptacle AMP VOLTS Twist-Lock Plug Twist-Lock Receptacle

15 125 L5-15P L5-15R 20 120/208 x 3~ WYE L21-20P L21-20R

20 125 L5-20P L5-20R 20 230/400 x 3~ WYE L22-20P L22-20R

30 125 L5-30P L5-30R 30 120/208 x 3~ WYE L21-30P L21-30R

20 250 L6-20P L6-20R 30 230/400 x 3~ WYE L22-30P L22-30R

30 250 L6-30P L6-30R 30 250 x 3~ Delta L15-30P L15-30R

20 125/250 L14-20P L14-20R AMP VOLTS California Style

30 125/250 L14-30P L14-30R 50 250 x 3~ Delta 3P, 4W 3P, 4W

What is 3-Phase Delta?

3-Phase Delta from 208V SourceWhat is 3-Phase WYE?

3-Phase Delta from 120/208V Source

Ground

Y Phase

X Phase

Z Phase

Neutral

Neutral

Z Phase

Z Phase

Y Phase

Y Phase

X PhaseX Phase

120V (XN)

208V (YZ)

208V (XY)

208V (ZX) 208V (ZX)

208V (XY)

208V (YZ)

Ground

Ground

L15-20P Plug L21-20P Plug

3 Phase Delta 3 Phase WYE

A 3-Phase Delta is a 4-wire configuration consisting of 3-Phase conductors (X, Y and Z) and a Ground. Without the neutral present, only phase-to-phase wiring is possible. The potential between any 2-Phase conductors is typically 208V.

A 3-Phase Delta 120/208V WYE is a 5-wire configuration consisting of 3-Phase conductors (X, Y and Z), Neutral and Ground. The potential between any 2-Phase conductors is 208V. The potential between any phase and neutral is 120V. This configuration can be wired to provide 120V, 208V or a combination of both voltages within one PDU.

120V (YN)

120V (ZN)

*Rating for CE Products


Po

wer

Dis

trib

uti

on

& C

lim

ate

Mo

nit

ori

ng

Environmental Monitors and Sensors

Applications

• Belden climate monitors and sensors allow precise monitoring/alarming of key environmental parameters for improved equipment availability in mission critical applications (Data Center, networking closet, remote locations)

• Built-in intuitive web interface for remote access via Ethernet browser

• Built-in and external sensor options (temperature, humidity, air flow, water detection, door position, smoke)

• SNMP-enabled for compatibility with leading DCIM package

• Recognize IP-based camera for space viewing

• Set alarm threshold, can be sent to up to five e-mail addresses

• Allows viewing of data graphs and analysis of historical logs

• Power supply included

• UL and cUL listed

Other Accessories


Environmental Monitors

Compact Self-Contained Environmental Monitor (5.25"Lx1.75"Hx1.5"W); Provides Web-Based Remote Surveillance with On-Board Temperature and Humidity/Dew Point Sensors. Has Input Capacity for Two External Sensors

9318-0500

Rack Mount 1RU Environmental Monitor. Provides Web-Based Remote Surveillance for up to (16) Digital Sensors and (3) Analog Sensors. This Unit Does Not Feature Internal Sensors

9318-0550

Rack Mount 1RU Environmental Monitor. Provides Web-Based Remote Surveillance of Temperature, Relative Humidity, Dew Point, Airflow, Light, Sound. Up to (5) Additional Digital Sensors Can Be Connected to the Unit. Comes Equipped with an LCD Display with Scrolling Measurements and a Built-In Audible Alarm

9318-0560

Rack Mount 1RU Environmental Monitor. Provides Web-Based Remote Surveillance of Temperature and any Additional Sensors Connected to the Unit. Comes Equipped with (4) Digital and (6) Analog Sensor Ports, an LCD Display with Scrolling Measurements, Built-In Audible Alarm and (3) Relay Output Ports

9318-0570

Environmental Monitors Accessories

19" Rack Mount 16-Way Splitter, 1RU for RJ12 Sensors 9318-0510

Remote PDU Display, RJ12 Connection 9318-0506

Sensors (compatible with environmental monitors and intellignet PDU)

Remote Temperature Sensor with 12 Ft. Wire 9318-0501



Remote Temperature/Air Flow/Humidity and Dew Point Sensor with 12 Ft. Wire 9318-0503



Remote Door Position Analog Sensor 9318-0504

Remote Water Detection Analog Sensor 9318-0505

DLinks Web Camera Kit 9318-0509

Temperature Displays (local monitoring only)

19" Rack Mount Temperature Display with Thermocouple; 1RU Blanking Panel Type 9318-0512

Temperature Display with Thermocouple; 1.72"H x 3.8"W x 1.1"D 9318-0513

9318-0506 Remote PDU Display

9318-0503 Temp/Air Flow/

Humidity Remote Sensor

DLinks Web Camera Kit

9318-0513 Temperature

Display with Thermocouple

9318-0560

9318-0570

9318-0550

9318-0500


Faster.

Easier.

Better.

Wa

rran

ty a

nd

Sh

ipp

ing

Po

licy

Warranty and Shipping Policy

Warranty

Limited Warranty

Belden warrants that, for a period of one (1) year following the date of delivery to the original customer, the products it offers for sale in the catalog are free from defects in material and workmanship. The foregoing warranty is subject to the terms, limitations and conditions set forth below.

Liability

Belden’s sole liability under this warranty will be to repair or replace, at its discretion, products that do not meet the specifications and descriptions provided in the catalog or purchase order due to defects in material and workmanship. Under no circumstances shall Belden be liable for any consequential or special damages for breach of this warranty. Belden’s total liability under this warranty shall be limited to the price actually paid by the customer for the product(s) covered. Except as specifically set forth above, Belden expressly disclaims any other representation or warranties of any kind, expressed or implied, arising by law or custom, with respect to products set forth in the catalog or otherwise sold by Belden, including without limitation, warranties or merchantability, fitness for a particular purpose, non-infringement or any other matter.

Conditions of Warranty

This warranty applies only to standard products set forth in the catalog. Custom products are covered by warranties stated in the Terms and Conditions of Belden’s quotation at the time of the order.

Repairs or Adjustments

Belden, at its discretion, will make any repairs or adjustments to any products that are due to defects and/or workmanship. This warranty does not extend to any items that upon inspection by Belden are deemed to have been misused, neglected, improperly treated, improperly installed, or used in violation of instructions or specifications approved by Belden, or otherwise handled, installed, shipped or used in violation of industry standards for metal fabrication and solid state electronic equipment.

Powerstrip Warranty

If a BELDEN power strip product becomes defective during the warranty period listed below, BELDEN will elect to either repair or replace the unit free of charge.

Basic Power Strips – Three Years

Metered, Monitored and Managed Power Strips – Three Years

Environmental Monitoring Units – Three Years

Shipping Policy

Freight Handling Charges

Third-Party Billing – Customer will specify carrier. Freight will be third-party billed other than to Belden or the customer.

The customer will supply a third-party account number or third-party billing address.

Freight Collect – Customer to specify carrier. Either a freight account number is provided or freight charges will be paid at destination upon delivery.

Prepaid and Add – Belden will specify carrier which has contractual agreements with select carriers.

All freight charges that appear on initial product invoice will be paid by the customer, and will not require any additional freight documentation. Belden’s billing cycle will only indicate on the invoice a freight charge from dock to dock. Any accessorial charges (e.g., lift gate, union driver) will be billed on an additional invoice other than the initial billing that will show the accessorial charges.

Shipping Policy

Belden will provide estimated freight charges and will not be liable for charges due to problems that may occur in transit or upon delivery or not known at the time of the initial quote (accessorial charges). All shipments leaving Belden are FOB origin.

Inside Delivery – A carrier driver will make an inside delivery if an adequate loading dock is available to roll off freight to a trailer level dock. The driver will be equipped to move the freight via hand truck or pallet jack and must be able to get to the inside destination without any problem of obstacles that would cause delays. The customer must supply a freight elevator if delivery requires it. This action may result in additional freight charges.

Lift Gate Service – Usually a lift gate is needed when a loading dock is not available. The freight is lowered to ground level and delivered to the customer’s door “only.” Not all trailers are equipped with a lift gate and most carrier terminals have a

limited number of lift gate trailers. This may cause a delay in shipment. This procedure may require an additional fee.

Notification – To coordinate delivery between the customer and the carrier, the customer must supply a phone number and contact person. This procedure may require an additional fee.

Re-Consignment – Once freight has left the Belden dock, the delivery destination address will be scheduled in the carrier dispatch system. A change of destination address is possible, depending upon the timing of delivery. This action may result in additional freight charges.

Redelivery – When a delivery is refused by a customer for any reason, other than the fault of the carrier, the freight will be returned to the carrier’s dock. A redelivery charge will apply.

Damages

All damages must be reported to Belden within three (3) working days upon delivery. Failure to report any damages will release Belden from any and all claims. It is the responsibility of the customer’s receiving personnel to check all shipping cartons for discrepancies (e.g., dents, punctures). All discrepancies to the shipping container should be noted on the carrier’s paperwork and documented. If, after opening the container, it is found that there is damage to the product, the carton is to be examined to determine that the damage was due to shipping.

Failure to examine cartons at delivery, and signing the carrier’s paperwork, releases the carrier and Belden from any and all freight claims.

Third-party billing customers will handle any and all freight claim damage with the carrier and are responsible for all freight charges.

Packaging

BELDEN enclosures are packaged in cardboard protective corner posts and protective plastic cover. The enclosures are then secured to a skid by banding prior to shipment.

This warranty does not include damage to the product resulting from accident or misuse, including exposure to water or any other corrosive material. This warranty excludes damage to equipment if surge or spike reaches that equipment through an unprotected source connected to it (i.e., printer, modem, phone line, etc.). It shall not apply to any product, which has been connected, installed, used or otherwise adjusted other than in accordance with written instructions furnished by BELDEN.

WARRANTY WILL BE VOIDED IF THE UNITS ARE OPENED, MODIFIED OR ALTERED DURING THE WARRANTY PERIOD.

Containment and Cooling Warranty

BELDEN warrants Containment and Cooling products for a period of one (1) year following the date of delivery. If the BELDEN product becomes defective during the one (1) year warranty period, BELDEN will elect to either repair or replace the unit free of charge. This warranty does not include damage to the product resulting from accident or misuse, including exposure to water or any other corrosive material.

WARRANTY WILL BE VOIDED IF THE UNITS ARE OPENED, MODIFIED OR ALTERED DURING THE WARRANTY PERIOD.

Less than truck load shipments (LTL) might require additional packaging due to multiple handling locations. Belden provides full protective packaging (i.e. 3" honeycomb cardboard corner posts, honeycomb top cardboard cover, cardboard wrap, shock-watch drop spot indicator) for an additional fee to accommodate LTL shipments with special needs. Please contact your customer service or sales rep to discuss the packaging options.

Return Policy for Repair, Replacement, Modification or Credit

Prior approval must be obtained for any products being returned. Upon approval an RMA number will be assigned to the items being returned. This RMA number MUST appear on all shipping documents and on the outside of each carton. Failure to include the RMA number on the carton will result in the refusal of delivery and return to the customer, freight collect.

All products returned for reasons other than repair or replacement are subject to a 15% restocking fee and must be shipped prepaid. In addition to the 15% restocking fee, the customer is responsible for properly packaging and returning the product in reusable condition. If not, additional charges may be added to the restocking fee. If a customer holds a product for more than ten (10) days, a return for credit will be voided.

Any or all special customized products can only be returned for modifications or repair of damages.

All products being returned shall be prepaid (unless they are being returned due to defect or damage), packaged in good condition and shipped to:

Belden2001 North Main StreetWashington, PA 15301


Pa

rt N

um

be

r In

dex

Part Number Index

Part No. Page Part No. Page Part No. Page Part No. Page

20128-KIT 67

8429-NFD-3 36

8429-NGD-3 36

8429-NKD-3 36

8429-NSD-3 36

8440-01-NSP-3 36

8440-02-NSP-3 36

8815-0100 68

8815-0101 68

8815-0102 68

8815-0103 68

8815-0104 68

8815-0200 68

8815-0210 68

8815-0211 68

8815-0212 68

8815-0221 68

8815-0222 68

8815-0223 68

8815-0224 68

8815-0225 68

8815-0226 68

8815-0227 68

8815-0228 68

8815-0240 68

8815-0241 68

8815-0242 68

8815-0243 68

8815-0244 68

8815-0245 68

8815-0280 68

8815-0282 68

8815-0283 68

8815-0284 68

8910-0100 67

8911-0100 67

8913-0100 67

8913-0220 67

8913-0320 67

8914-0100 67

8915-0100 67

8915-0220 67

8915-0320 67

8917-0100 67

8917-0125 40

8917-0220 67

8917-0320 67

9010-1924 64

9010-1930 64

9010-1936 64

9011-1912 64

9011-1918 64

9011-1918-16 64

9012-1918 64

9012-1918-16 64

9013-1924 64

9015-1909 64

9318-0500 78

9318-0501 78

9318-0503 78

9318-0504 78

9318-0505 78

9318-0506 78

9318-0509 78

9318-0510 78

9318-0511 78

9318-0512 78

9318-0513 78

9318-0515 78

9318-0516 78

9318-0550 78

9318-0560 78

9318-0570 78

9420-1905 66

9420-1906 66

9510-1901 65

9511-1902 65

9511-1902-01 65

9511-1903-01 65

9511-1904-01 65

9512-1901 45, 65

9512-1902-FR 65

9512-1902N 45, 65

9512-1903 59, 62

9714-0190 65

9910-0100-01/-02 66

9910-0100PL-01/-02 66

9911-0200-01/-02 66

9911-0200PL-01/-02 66

9911-0201-01 66

9912-0300-01/-02 66

9913-0400-01/-02 66

9914-0800-01/02 66

9BF1-061001 72

9BF1-061002 40, 72

9BF1-081001 72

9BF1-141001 72

9BG1-101001 40, 72

9BG1-141001 72

9BG1-141002 72

9BG2-081001 72

9BG2-141001 72

9BG2-141002 72

9BL3-121001 73

9BL3-241001 73

9CJ2-301001 73

9LB2-121001 72

9LB2-301001 72

9LC2-301001 73

9LC3-301001 73

9LD2-301001 73

9LD3-301001 73

9LF1-101001 72

9LG1-101001 72

9LH2-241001 72

9LI2-301001 73

9LJ2-301001 73

9LJ2-331001 73

9OB2-241001 72

9OC2-241001 73

9OD3-241001 73

9OJ2-301001 73

9PB2-301001 72

9PB2-301002 72

9PB2-421001 72

9PC2-441001 73

9PG2-101001 72

9PL3-301001 73

9SB2-241001 74

9SC2-241001 74

9SC2-241002 74

9SC3-241001 74

9SC3-241002 74

9SD2-241001 74

9SD2-241002 74

9SD3-241001 74

9SD3-241002 74

9SG1-081001 74

9SG1-081002 74

9SJ2-241001 74


Faster.

Easier.

Better.

Pa

rt Nu

mb

er In

dex

Part Number Index


9SJ2-241002 74

9SL3-241002 74

9SL3-241002 74

AX100783 21, 67

AX100783 75

AX100784 21, 67, 75

AX102516 67

AX102517 67

AX105366 21

AX105367 21

BHBC03X 45

BHBC06X 45

BHBC10X 45

BHBC12X 45

BHDB03X 45

BHDB06X 45

BHDB10X 45

BHDB12X 45

BHDK03X 45

BHDK06X 45

BHDK10X 45

BHDK12X 45

BHFB11U 45

BHFS11U 45

BHGL03X 45

BHGL06X 45

BHGL10X 45

BHGL12X 45

BHGR03X 45

BHGR06X 45

BHGR10X 45

BHGR12X 45

BHH191UC 65

BHH191UR 45, 65

BHH192UC 65

BHH192UR 45, 65

BHH193UC 65

BHH193UR 45, 65

BHH194UC 65

BHH194UR 45, 65

BHPF100 45

BHRR194 44

BHRR6194 44

BHSK020 45

BHSM100 45

BHSP020 45

BHTD196 45

BHTL196 45

BHTT196 45

BHTTH196 45

BHVH003 41, 45

BHVH006 41, 45

BHVH010 41, 45

BHVH012 41, 45

BHVHH03 45

BHVHH06 45

BHVHH10 45

BHVHH12 45

BHVHL03 45

BHVHL06 45

BHVHL10 45

BHVHL12 45

BHVL003 41, 45

BHVL006 41, 45

BHVL010 41, 45

BHVL012 41, 45

C1S42-1-211221 38

C2S42-1-211221 38

C3S42-1-211221 38

C4S42-1-211221 38

CSC13C1436BK 75

CSC13C1448BK 75

CSC13C14yyBK 75

CSC19C2036BK 75

CSC19C2048BK 75

CSC19C20yyBK 75

CSLC13C1420BL 75

CSLC13C1420OR 75

CSLC13C1439BL 75

CSLC13C1439OR 75

CSLC19C2020BL 75

CSLC19C2020OR 75

CSLC19C2039BL 75

CSLC19C2039OR 75

FFZH00BB 21

FFZH06KC 21

FFZH08KC 21

HCB-1932-1.5-01 65

HCB-1932-2.5-01 65

HCC001-B 34

HCC001-W 34

HCCBP-B 34

HCCBP-W 34

HCDBP-B 34

HCDBP-W 34

HCFD10 34

HCFD20 34

HCFD30 34

HCH001 34

HCP001 34

HCP002 34

VCMFDR4X4 45

X1S45-C1000 17

X1S45-C2000 17

X1SN-C1001 28

X1SN-C1002 28

X1SN-C70101001 28

X1SN-C70101002 28

X1SS-C1001 28

X1SS-C1002 28

X2S45-C1000 17

X2S45-C1001 17

X2S45-C2000 17

X2S45-C2001 17

X2SN-C65091001 28

X2SN-C65091002 28

X2SN-C65091004 28

X2SN-C65091005 28

X2SN-C70181001 28

X2SN-C70181002 28

X2SS-C1001 28

X2SS-C1002 28

X3M45-1-100000 44

X3S45-C1000 17

X3S45-C2000 17

X4N45-C6509101 23

X4N45-C6509102 23

X4N45-C6509103 23

X4N45-C6509104 23

X4N45-C7009101 23

X4N45-C7009102 23

X4N45-C7010101 23

X4N45-C7010102 23

X4N45-C7018101 23

X4N45-C7018102 23

X4S45-C1000 17

X4S45-C1001 17

X4S45-C2000 17

X4S45-C2001 17

XBK01 26, 67


Pa

rt N

um

be

r In

dex

Part Number IndexPart Number Index


XBS-11-0001 65, 67

XBS-18-0001 67

XBS-18-0002 65

XCK01 26

XCK02 26

XCTM 26, 75

XCTV12 56, 59, 62

XCTV18 56, 59, 62

XCTV24 56, 69, 62

XDR8419-310 44

XDR8419-3102836 44

XDR8419-310N 44

XDR8419-310N1M 44

XDR8419-310N2M 44

XDR8419-310W 44

XDR8419-312 44

XDR8419-3122836 44

XDR8419-312N 44

XDR8419-312N1M 44

XDR8419-312N2M 44

XDR8419-312W 44

XDRS8419-610 44

XDRS8419-61028 44

XDRS8419-61032 44

XFPWB1U101/02 66

XFPWB2U101/02 66

XFPWB3U101/02 66

XFPWB4U101/02 66

XFS01 19

XFS02 19

XLK01 26

XMEBK01 59, 62, 67

XMEEG01 59

XMEGK01 59, 62

XMELM 59, 62

XMERSB 59, 62

XMFBK01 56, 67

XMFBK02 56, 67

XMFBK03 56

XMFCTM 56, 59, 62, 67

XMFEG01 56

XMFEG02 56

XMFS01 29

XMFSB 56

XMR01 21, 26, 75

XMR02 21, 26

XMR03 21, 26, 75

XN4530ADS0101 26

XN4530ADS0102 26

XN4530ADS0301 26

XN4530ADS0302 26

XN4530ADS0401 26

XN4530ADS0402 26

XNFS42 26

XNFS45 26

XNFS48 26

XNM-0100 67

XNM84-3-10000 36

XNPM01 26, 75

XNPM02 26, 75

XNPM03 26, 75

XNPM04 26, 75

XNSKB01 26

XNSKB02 26

XNVLP42901 75

XNVLP42902 75

XNVLP45901 75

XNVLP45902 75

XNVLP48901 75

XNVLP48902 75

XPE-S0001 46

XSFBK01 67

XSK020 21, 75

XSK020 75

XSMS01 26

XSMS02 26

XSN44VRPM101 30, 75

XSN44VRPM102 30, 75

XSN44VRPM201 30, 75

XSN44VRPM202 30, 75

XSNTCT3001 30

XSNTCT3002 30

XSNTCT4001 30

XSNTCT4002 30

XSNVMP440301 30

XSNVMP440302 30

XSPDUB01 19

XSRSBK01 19

XSS4424RSK01 29

XSS4424RSK02 29

XSS4430RSK01 29

XSS4430RSK02 29

XSSFS4401 29

XSSVMP014401 29

XSSVMP014402 29

XSSVMP024401 29

XSSVMP024402 29

XSW-0100 47

XSW-0200 47

XSW-8419 47

XTCM01 21

XVGB0142 21

XVGB0145 21

XVGB0148 21

XVMP014201 75

XVMP014202 75

XVMP014501 75

XVMP014502 75

XVMP014801 75

XVMP014802 75

XVMP024201 75

XVMP024202 75

XVMP024501 75

XVMP024502 75

XVMP024801 75

XVMP024802 75

XWB-2U 46

XWB-4U 46

XWB-6U 46

XWM-2109-GD 40

XWM-2109-SD 40

XWM-2312-GD 40

XWM-2312-SD 40

XWM-2320-GD 40

XWM-2320-SD 40

XWM-9312-1600 40

XWMLP12 40

XWMLP20 40

XWMLP9 40

XWR-1219 46

XWR-3619-18 46

XWR-3619-18HD 46

XWR-4819-18 46

XWR-4819-18HD 46

XZUK01 21

XZUK02 21


Faster.

Easier.

Better.

Belden Rack and Enclosure ManufacturingState-of-the-Art Manufacturing and Assembly Operation

Lean Manufacturing

Belden’s lean manufac-turing philosophy is exemplified in its manufacturing plant, where infrastructure solutions, including racks, enclosures, heat containment and rack power distribution units, are produced. The plant is structured for cell-based manufacturing, where automated machines, such as the CNC punch press, CNC laser-punch combination machine and CNC CO2 lasers, work seamlessly with semi-automated metal-bending machines and assembly operations.

Packaging and Shipping

In order to provide our customers with high-performance enclosure systems and just-in-time delivery, the factory process flow is based on a value stream map, with raw materials received at a receiving dock (close to fabricating cells) and finished goods shipped from a shipping dock (close to the packaging cell). All enclosures are shipped with unique serial number tags, enabling full traceability.

Fabrication

Precision CO2 lasers with automated loading and unloading capabilities are at the heart of our sheet metal fabrication cell, with defect-free laser cutting at speeds up to 400 inches per minute. The parts are then sent through a continuous flow of metal forming, welding, powder coating and assembly cells.

Environmentally Friendly Powder Coating

Belden’s powder-coating process involves industry leading five-stage wash and pre-treatment steps, ensuring a lasting and durable finish. Each enclosure is baked in compliance with ASTM standards to prevent paint from scaling or chipping, thus ensuring rust-proof enclosures. The entire process is environmentally friendly, with complete conformance to both state and federal “Clean Air Act” guidelines.

Quality Inspection

The cell-based assembly process includes stringent quality checks at each location within the cell, which are tracked in an assembly check list by each associate assembling an enclosure system. Throughout this manufacturing process, the external quality, measured in defects per million, is less than 100. Lean daily management (LDM) and continuous improvement processes drive manufacturing and design philosophy at Belden to ensure each customer’s quality and delivery expectations are met in a safety conscious work environment.

Our modern

manufacturing

and assembly

facility ensures

that customers

receive the quality

products they’ve

come to expect.

GLOBAL LOCATIONS

UNITED STATES

Division Headquarters

401 Pennsylvania Parkway, #200 Indianapolis, IN USA Phone: (1)-317-818-6300 Inside Sales: 800-235-3361 Fax: (1)-317-818-6382 [email protected]

Infrastructure Solutions

Manufacturing Operations

2001 N. Main StreetWashington, PA 15301 USA Phone: (1)-800-793-2954 (1)-724-228-7373 Fax: (1)-724-228-3920

CANADA

National Business Center

2280 Alfred-Nobel Boulevard St-Laurent, Quebec Canada Phone: 514-822-2345 Fax: 514-822-7979 [email protected]

BRAZIL

Regional Office

Rua Surubim, 577 - 4o andar São Paulo, SP Brazil Phone: 5511-4097-2555 Fax: 5511-4097-2545 [email protected]

For worldwide Sales and Technical

Support, visit: www.belden.com

©Copyright 2013, Belden Inc. Printed in U. S. A. Infrastructure Solutions Catalog | CA_ECOS_BDC_0813_A_AG

Belden Infrastructure Solutions Catalogecs.beldenapac.com/uploads/soft/Catalog/Infrastructure...®...

Documents

Transcript of Belden Infrastructure Solutions Catalogecs.beldenapac.com/uploads/soft/Catalog/Infrastructure...®...