Basic tools kit
Transcript of Basic tools kit
By : NUR FATIHAH BINTI AZIZ
BASIC TOOLS KIT
INTRODUCTION
This unit covers the basic computer assembling. As the components of a computer vary based on the requirement, to make learning simpler, you start by uninstalling a PC. Just by removing the individual components from the PC, you can identify the common hardware devices. Identify the motherboard slot for each component . Install the components one by one and set up a working PC .
NOSE PLIERSO Is used to removed
components that are very small in the computer and those components that are difficult to remove manually . It is also used to removed the expansion slot shutter
WRIST STRAPO Is used to
prevent any damage that can be caused by static electricity
SCREWDRIVERO Is the most
commonly used tool to remove or fix screw
TEST PENO Is used to detect
the presence of electric current
IC PULLERSO Is used to
removed the removable integrated circuits from the circuit board . IC puller is used to pull removable IC from the circuits board
Anti-Static MatO An anti-static floor
mat or ground mat is an anti-static device that safeguards an individual or piece of equipment like a PC from an electrostatic discharge (ESD).