Barrelless system
1
operates under constant full vac- uum for process steps such as ro- tation, oscillation, turbojet spray, ultrasonics, and final spray. Sol- vent is continually being distilled and filtered for cleanliness. Circle 436 on the reader service card BARRELLESS SYSTEM Technic Equipment Div., Pawtucket, R.I. The Tumbleplater offers faster plating speeds, significant reduc- tions in dragout, and greater plat- ing uniformity than barrel lines of equal size. It also features the unique ability to transfer only the parts from station to station and offers multiple processing options with cost-saving modular configu- rations and in-line drying. Circle 437 on the reader service card DOWNDRAFT TABLE Tri-Mer Corp., Owosso, Mich. • Novalytes ... • Aldolytes... • Aldacs... • Aquations,.. • Aldo-Kotes... • Alloy Plating... Ressc=rch Associate to brighten, purify and control plating results! to purify, enhance and brighten your zinc,copper, and nickel plating! to clean up aluminum, steel, iron, brass, and copper! to remove suspended solids and sludges, recover oil, treat alkaline cleaners and heavy metal affluents! for brighter chromate conversion coatings in a variety of colors for zinc, aluminum, galvanized and cadmium-plated surfaces! Cyanide-free zinc alloys ofiron, cobalt, nickel and copper! ALDOA COMPANY Or reach us through: 12727 Westwood Ave. IDEAL CHEMICAL & SUPPLY CO. Detroit, MI 48223-3433 P.O. Box 18698 (313) 273-5705 Memphis, TN 38181-0698 FAX: (313) 273-0310 1-800-232-6776 ~4 Circle 003 on reader information card Tri-Mer's downdraft table collects particulate from cutting, grind- ing, sanding, and deburring oper- ations. Suction air nozzles built into the edge of the table offer close capture of particulate. Be- cause airborne dust is pulled through the work surface and ex- its through a duct behind the ta- ble, the work area on the table top in unrestricted. Ductwork from the work table is ventilated to a dust collector installed nearby. Options include lights, tool draw- ers, and bulletin boards. Height can be customized for use while seated or standing. Circle 438 on the reader service card FILTRATION MEDIA Turnkey Solutions Inc., Midland Park, N.J. 150 Metal Finishing
Transcript of Barrelless system
operates under constant full vac- uum for process steps such as ro- tation, oscillation, turbojet spray, ultrasonics, and final spray. Sol- vent is continually being distilled and filtered for cleanliness. Circle 436 on the reader service card
BARRELLESS SYSTEM Technic Equipment Div., Pawtucket, R.I.
The Tumblepla ter offers faster plating speeds, significant reduc-
tions in dragout, and greater plat- ing uniformity than barrel lines of equal size. It also features the unique ability to transfer only the parts from station to station and offers multiple processing options with cost-saving modular configu- rations and in-line drying. Circle 437 on the reader service card
DOWNDRAFT TABLE Tri-Mer Corp., Owosso, Mich.
• Novalytes ...
• Aldolytes...
• Aldacs...
• Aquations,. .
• Aldo-Kotes.. .
• Alloy Plating...
Ressc=rch Associate
to brighten, purify and control plating results!
to purify, enhance and brighten your zinc,copper, and nickel plating!
to clean up aluminum, steel, iron, brass, and copper!
to remove suspended solids and sludges, recover oil, treat alkaline cleaners and heavy metal affluents!
for brighter chromate conversion coatings in a variety of colors for zinc, aluminum, galvanized and cadmium-plated surfaces!
Cyanide-free zinc alloys ofiron, cobalt, nickel and copper!
ALDOA COMPANY Or reach us through: 12727 Westwood Ave. IDEAL CHEMICAL & SUPPLY CO. Detroit, MI 48223-3433 P.O. Box 18698 (313) 273-5705 Memphis, TN 38181-0698 FAX: (313) 273-0310 1-800-232-6776 ~4
Circle 003 on reader information card
Tri-Mer's downdraft table collects particulate from cutting, grind- ing, sanding, and deburring oper- ations. Suction air nozzles built into the edge of the table offer close capture of particulate. Be- cause a i rborne dus t is pul led through the work surface and ex- its through a duct behind the ta- ble, the work area on the table top in unrestricted. Ductwork from the work table is ventilated to a dust collector installed nearby. Options include lights, tool draw- ers, and bulletin boards. Height can be customized for use while seated or standing. Circle 438 on the reader service card
FILTRATION M E D I A Turnkey Solutions Inc., Midland Park, N.J.
150 Metal Finishing
