Sejh muhammed b. abdul vehhab rhm., i njegov pristup pitanju tekfira
AUTOMATIC TRANSMISSION Presented By, Guided By, Muhammed RiyasGopinathan.V Muhammed...
-
Upload
merilyn-carson -
Category
Documents
-
view
221 -
download
1
Transcript of AUTOMATIC TRANSMISSION Presented By, Guided By, Muhammed RiyasGopinathan.V Muhammed...
AUTOMATIC AUTOMATIC TRANSMISSIONTRANSMISSION
AUTOMATIC AUTOMATIC TRANSMISSIONTRANSMISSION
Presented By, Guided By,Presented By, Guided By, Muhammed RiyasMuhammed Riyas Gopinathan.VGopinathan.V SS77MMBB Asst:ProfAsst:Prof NO:103NO:103 Dept of Mechanical Dept of Mechanical EnggEngg
IntroductionIntroduction
• Device which changes gear ratios automaticallyDevice which changes gear ratios automatically
• Deliver maximum efficiency Deliver maximum efficiency
• Difference between automatic and manual Difference between automatic and manual transmissiontransmission
• Easier to drive because they do not have a clutch Easier to drive because they do not have a clutch pedal or gearshift leverpedal or gearshift lever
• There are two type of automatic transmissionsThere are two type of automatic transmissions
CLASSIFICATIONCLASSIFICATION
AUTOMATIC AUTOMATIC TRANSMISSIONS TRANSMISSIONS USING USING PLANETARY PLANETARY GEARSGEARS
CONTINUOUSLY VARIABLE CONTINUOUSLY VARIABLE TRANSMISSION(CVT)TRANSMISSION(CVT)
AUTOMATIC AUTOMATIC TRANSMISSIONS USING TRANSMISSIONS USING PLANETARY GEARSPLANETARY GEARSComponentsComponents
• PLANETARY GEAR PLANETARY GEAR SYSTEMSYSTEM
• TORQUE TORQUE CONVERTERCONVERTER
• HYDRAULIC SYSTEMHYDRAULIC SYSTEM• GOVERNORGOVERNOR• COMPUTER COMPUTER
CONTROLSCONTROLS
1. Sun gear 2. Planet gear 3. Ring gear 4. Planetary carrier
PLANETARY GEAR SYSTEM
PLANETARY GEAR SYSTEM (SIDE VIEW)
HOW PLANETARY GEARS WORK
Input Output Stationary Calculation Gear Ratio
A Sun (S) Planet Carrier (C) Ring (R) 1 + R/S 3.4:1
B Planet Carrier (C) Ring (R) Sun (S) 1 / (1 + S/R) 0.71:1
C Sun (S) Ring (R) Planet Carrier (C) -R/S -2.4:1
Gear Input Output Fixed Gear Ratio
1st 30-tooth sun 72-tooth ring Planet carrier 2.4:1
2nd
30-tooth sun Planet carrier 36-tooth sun 2.2:1
Planet carrier 72-tooth ring 36-tooth sun 0.67:1
Total 2nd 1.47:1
3rd30- and 36-tooth
suns72-tooth ring 1.0:1
OD Planet carrier 72-tooth ring 36-tooth sun 0.67:1
Reverse 36-tooth sun 72-tooth ring Planet carrier -2.0:1
•Power transfer can only take place when one of the members is held at rest or if two of the members are locked.
TORQUE CONVERTOR
• takes the place of the clutch found on standard shift vehicles • large doughnut shaped device that is mounted
between the engine and the transmission • it uses oil or transmission fluid to transmit power• three internal elements that work together to transmit power to the transmission.
TORQUE CONVERTOR
THE HYDRAULIC SYSTEM
• complex maze of passages and tubes that sends transmission fluid under under pressure to all parts of the transmission
and torque converter. • Transmission fluid serves in shift control, general
lubrication and transmission cooling.• Keeps the transmission at normal operating
temperature
• OIL PUMP• VALVE BODY• SHIFT VALVES• BANDS
Gear pumpGear pump
Oil PumpOil Pump
• Produce all the oil pressure that is required in the transmission
• The oil is then sent, under pressure to the pressure regulator, the valve body and the rest of the components, as required.
Valve BodyValve Body
• The brain of the automatic transmission
• Contains a maze of channels and passages that direct hydraulic fluid to the numerous valves
• These valves activate the appropriate clutch pack or band servo to smoothly shift to the appropriate gear for each driving situation.
Shift Valves
• Supply hydraulic pressure to
the clutches and bands to engage each gear• Determines when to shift
from one gear to the next• The 1 to 2 shift valves
determines when to shift from first to second gear.
BandBand• A band is a steel strap with
friction material bonded to the
inside surface.
GOVERNERGOVERNER
• provides the inputs that tell provides the inputs that tell the transmission when to the transmission when to shiftshift
• connected to the output connected to the output shaft and regulates shaft and regulates hydraulic pressure based on hydraulic pressure based on vehicle speedvehicle speed
COMPUTER CONTROLLSCOMPUTER CONTROLLS
• Detect such things as throttle position, vehicle Detect such things as throttle position, vehicle speed, engine speed, engine load,etc. to control speed, engine speed, engine load,etc. to control exactexact shift pointsshift points
• Downshift automatically when going downhill, Downshift automatically when going downhill, to control speed and reduce wear on the to control speed and reduce wear on the brakes. brakes.
• Up shift when braking on a slippery surface to Up shift when braking on a slippery surface to reduce the braking torque applied by the reduce the braking torque applied by the engine. engine.
• Inhibit the Up shift when going into a turn on a Inhibit the Up shift when going into a turn on a winding road. winding road.
CONCLUSIONCONCLUSION
Automatic transmissions contain mechanical systems, hydraulic systems, electrical systems and computer controls, all working together in perfect harmony
THANK YOUTHANK YOU