Asign(09) 2

4
Assignment(09) 2 - Wk 3 & 4

Transcript of Asign(09) 2

Page 1: Asign(09) 2

Assignment(09) 2 - Wk 3 & 4

Page 2: Asign(09) 2

Assignment(09) 2 - Wk 3 & 4

Q3 The load P produces an axial strain in the steel post D of the fig. below of 0.0075m/m. Determine

a. The axial strain in the aluminum rod CE

b. The axial strain in the aluminum rod CE if there is a 0.10 mm clearance in the connection at E in addition to the 0.09 mm clearance between B and D before the load P is applied.

Page 3: Asign(09) 2

Assignment(09) 2 - Wk 3 & 4

Q4 A rigid bar AD is supported by two rods as shown in the figure. There is no strain in the vertical bars before the load P is applied. After the load P is applied, the axial strain in rod BF um/m. Determine the axial strain in rod CE.