ARIES™ Software Version 5000.1.11

ARIES™ Software

Version 5000.1.11.0 Release Notes

ARIES Software Release Notes

Table of Contents (items below are direct links)

What’s In This Release ................................................................................................................. 3 Introduction ................................................................................................................................... 4 Release 5000 Compatibility .......................................................................................................... 4 OS, Hardware, and Platforms ....................................................................................................... 4 System Requirements ................................................................................................................... 5 Third Party Applications ................................................................................................................ 5 International Trade Compliance .................................................................................................... 5 Distribution .................................................................................................................................... 7 Licensing ....................................................................................................................................... 7 Enhancements and New Functionality .......................................................................................... 8

Automatic Forecasting .............................................................................................................. 8 Intelligent Data Point Filtering ................................................................................................... 8 New Range Line Options .......................................................................................................... 8 Expanded Trend Forecasting .................................................................................................... 8 Expanded Lookup Table ........................................................................................................... 8 Econ Global Editor: Find Duplicate Keywords .......................................................................... 8 Econ Global Editor: Find Missing .............................................................................................. 9 Econ Global Editor: Re-sequence Data Lines .......................................................................... 9 New ACR6 Tax Depreciation .................................................................................................... 9 Disable Mass Econ Data Delete ............................................................................................... 9 Display ShowID for Group Name .............................................................................................. 9 “Refresh” Option to Include Group Memberships ..................................................................... 9 Extendable Ratio Forecasts .................................................................................................... 10 Commas in Graphs and Plots ................................................................................................. 10 Improved Text for Legend Ratios ............................................................................................ 10 Injection Well Count ................................................................................................................ 10 MultiGraph PUT Keeps Non-qualified Lines On Bottom ......................................................... 10

Database Changes ..................................................................................................................... 10 Defects Repaired ........................................................................................................................ 13 Known Issues .............................................................................................................................. 17 ARIES Modeler 5000.1.11 Release Notes .................................................................................. 18

Modeler Enhancements .......................................................................................................... 18 ARIES Modeler Defects Fixed since the 5000.1.10 release (June 2012) ................................ 20 ARIES Modeler Known Problems ........................................................................................... 21

Appendix – Details ...................................................................................................................... 22 1 – Automatic Forecasting ...................................................................................................... 22 2 – Intelligent Data Point Filtering ........................................................................................... 27 3 – Expanded Trend Forecasting ............................................................................................ 28 4 – Expanded Lookup Table ................................................................................................... 29 5 – Econ Global Editor: Find Duplicate Keywords .................................................................. 31 6 – Econ Global Editor: Find Missing ...................................................................................... 32

Contacting Support ..................................................................................................................... 33 Helpful Internet Links .................................................................................................................. 33 Halliburton | Landmark Software & Services ......................................................................... 34

5000.1.11.0 of 35 June 2013


What’s In This Release

ARIESTM 5000.1.11.0 is the name of the major new ARIES software release for 2013. It delivers improvements in three main areas:

• Top-rated User Group enhancements

• Improved usability

• Defect repairs

To go directly to the enhancements, defect repairs, or known problems for the ARIES application, click on the links below:

Enhancements and New Functionality

Defects Repaired

Known Issues

These Release Notes also contain information on the ARIES Modeler, an Appendix for in-depth discussions of major enhancements, and information on Software Licensing.

5000.1.11.0 of 35 June 2013


Introduction The ARIES 5000.1.11.0 release includes all the modules for ARIES System (Project Manager, Graphics, and Economics), plus the optional modules for Modeler, Reserve Management System, and DecisionSuiteTM. Release details specifically for the Modeler are included at the end of main part of this document.

This ARIES release is available for electronic software distribution, or by request, on a dedicated distribution DVD, to all customers who are current on M&S. This is explained in detail below. It provides a simple installation process which is described in the Installation Guide document included with the release.

Customers running ARIES 5000.0.2.0 or later can use their existing software licenses. New users and customers running older versions must obtain new license files to use this new ARIES release. This is described in more detail below. Those customers who use a license server (local or network), as opposed to a standalone license, must also have the R5000 version of the License Application Manager.

Release 5000 Compatibility This ARIES release is compatible with the Landmark R5000 platform which is designed to increase the usability and stability of all the applications, platforms, and third-party tools.

OS, Hardware, and Platforms ARIES 5000.1.11.0 is a 32-bit multi-threaded application capable of supporting up to five processors. It was tested primarily with MS Windows® 7 with limited testing on Windows XP 64 SP3 and Windows 8. The basic hardware requirements have not changed. They include a DVD reader for local installations if the electronic software distribution is not used. Hardware must be appropriate to run the chosen operating system.

Oracle® 10g and 11g, MS SQL Server 2008 and 2012, and MS SQL Express 2008 and 2012 databases are supported by the program, as are MS Access databases in the .mdb and .accdb formats. While ARIES 5000.1.11.0 was not tested on Oracle 9i or SQL Server 2005, it is unlikely that any problems will arise with these older databases.

If needed MS SQL Express 2008 or 2012 should be downloaded from Microsoft. MS SQL Server Express 2012 has not been tested extensively, but no problems are expected.

For wide area network environments, such as Citrix, the ARIES installations are custom and must be implemented and supported by your company network administrators or the Landmark Consulting Services group.

5000.1.11.0 of 35 June 2013


System Requirements The following minimum and recommended local computer system requirements for running the ARIES software are provided as general guidelines. They will vary depending on types of projects, project sizes, number of users, and network infrastructure and traffic.

Recommended Minimum

OS - Windows® 7 x64 SP 1, or Windows® XP Professional, SP 3

OS - Windows® 7 SP 1 or Windows® XP Professional, SP 3

2 GHz processor 1 GHz processor

2 GB RAM or greater 1 GB RAM or greater

XGA Color Monitor, or better XGA Color Monitor (1024 x 768)

Windows-compatible integrated keyboard Windows-compatible integrated keyboard

Windows-compatible mouse Windows-compatible mouse

TCP/IP-based network connection 100 Mbps, or FLEXid bitlock, FLEXlm version 11.6.3 (for licensing)

TCP/IP-based network connection 100 Mbps, or FLEXid bitlock, FLEXlm version 11.6.3 (for licensing)

3 GB or better disk space 2 GB disk space

DVD reader (if installing from optional DVD) DVD reader (if installing from optional DVD)

USB port (if bitlock license used) USB port (if bitlock license used)

Microsoft .NET 3.5 framework Microsoft .NET 3.5 framework

Microsoft Access 32-bit.accdb drivers

Third Party Applications Halliburton uses various third-party applications in the development of its software. Halliburton acknowledges that certain third party code has been bundled with, or embedded in, its software. The licensors of this third party code, and the terms and conditions of their respective licenses, can be found in ARIES by clicking the Patents and Legal Notices button on the Help About… dialog. This dialog is accessible from the Help menu in all modules.

International Trade Compliance This application is manufactured or designed using U.S. origin technology and is therefore subject to the export control laws of the United States. Any use or further disposition of such items is subject to U.S. law. Exports from the United States and any re-export thereafter may require a formal export license authorization from the government. If there are doubts about the requirements of the applicable law, it is recommended that the buyer obtain qualified legal advice. These items cannot be used in the design, production, use, or storage of chemical, biological, or nuclear weapons, or missiles of any kind.

The ECCN’s provided in Release Notes represent Halliburton’s opinion of the correct classification for the product today (based on the original software and/or original hardware). Classifications are subject to change. If you have any questions or need assistance please contact us at:

5000.1.11.0 of 35 June 2013


[email protected]

Under the U.S. Export Administration Regulations (EAR), the U.S. Government assigns your organization or client, as exporter/importer of record, responsibility for determining the correct authorization for the item at the time of export/import. Restrictions may apply to shipments based on the products, the customer, or the country of destination, and an export license may be required by the Department of Commerce prior to shipment. The U.S. Bureau of Industry and Security provides a website to assist you with determining the need for a license and with information regarding where to obtain help.

The URL is:

http://www.bis.doc.gov

This information is also available within ARIES from the Help, About menu in each module by selecting the Patents and Legal Notices button.

Definitions CCATS (Commodity Classification Automated Tracking System) - the tracking number assigned by the U.S. Bureau of Industry and Security (BIS) to products formally reviewed and classified by the government. The CCATS provides information concerning export/re-export authorizations, available exceptions, and conditions.

ECCN (Export Control Classification Number) -The ECCN is an alpha-numeric code, e.g., 3A001, that describes a particular item or type of item, and shows the controls placed on that item. The CCL (Commerce Control List) is divided into ten broad categories, and each category is further subdivided into five product groups. The CCL is available on the EAR Website.

The ECCN Number, License Type, and the CCATS Numbers for this product are included in the table below. Also included is the date the table was last updated.

Product/Component/R5000 ECCN Number License CCATS Number Last Date Updated

ARIES 5000.1.11.0 5D002 ENC G063964 6/04/2012

5000.1.11.0 of 35 June 2013

mailto:[email protected]

http://www.bis.doc.gov/

http://www.access.gpo.gov/bis/ear/ear_data.html%23ccl


Distribution This latest ARIES version is available for you to download electronically using the Landmark Software Manager (LSM), subject to authorization and registration by your company for you. The link to the LSM web site is http://esd.halliburton.com/download/download.jsp.

You can schedule your downloads, or you can download one or more applications immediately.

If you cannot download the applications through LSM due to bandwidth limitations or for other reasons, you may request a DVD by using features within LSM.

Licensing ARIES uses the Flexera Software FlexNet PublisherTM version 11.6.3 licensing application. This increases compatibility among all the Landmark applications and third-party applications. This version of FlexNet Publisher also provides license management functions to your company, which you would access through their applications.

All customers currently running ARIES 5000.0.2 or later versions can use their existing software licenses to run ARIES 5000.1.10.0.

New customers and existing customers running older versions must obtain new licenses from Landmark, in the form of updated license files or new bitlocks. These new licenses are compatible with releases 5000.0.0 and later. They are not directly compatible with older releases, such as 2007.1.

Customers who are upgrading from a version prior to 5000.0.1, and who use a network or local license server must install the newer R5000 version of the Landmark License Application Manager. Customers who are upgrading from version 5000.0.1 or later will already have the newer License Application Manager.

This LAM installation is available from the Landmark Software Manager and is accessed from the Discipline – Tools row on the bottom of the list on the Home tab. Click the + box at the left of the row to display the individual downloads. Check mark the LAM 5000.0.3 Release Windows XP and Windows 7 row and select the green download arrow to the right on the row. You can read the release notes or installation instructions prior to downloading by clicking the R or I buttons to the right on the row,

5000.1.11.0 of 35 June 2013

http://esd.halliburton.com/download/download.jsp


Enhancements and New Functionality Summaries of the enhancements delivered in 5000.1.11 are provided below. Additional details are provided in the Appendix for those enhancements below that include (more info) links and in the Online Help.

Automatic Forecasting The AutoCast feature has been significantly expanded to automatically perform curve fits and create new forecasts for all the marked properties and some types of groups in your Picklist. It is primarily intended to perform quick and easy initial forecasts for large numbers of properties, such as for a first look at an acquisition. (more info)

Intelligent Data Point Filtering To streamline forecasting, you can use the new IntelliFilter data point filtering routine before you perform a curve fit. You can apply it manually or automatically to one or more of the monthly curves on a rate-time or rate-cum graph, or to the average curve on a Trend graph, It attempts to isolate the final production trend segment and remove outlying points. (more info)

New Range Line Options These new options let you control the initial location of the range lines to help limit the data points that you fit. You select these options from the dropdowns on the graph scheme Global Forecast tab, in the Initialize section.

For the Beginning Range Line item you can select the High Major plus … option and enter any additional months to skip in positioning this limit. This eliminates well startup points from the curve fits.

For the End Range Line item you can select the First actual plus… option and enter any number of months to be added in positioning this limit. This lets you easily fit on only the first 24 months of data, for example.

Expanded Trend Forecasting Trend forecasting has been enhanced to include stretched exponential decline fitting of the average curve points. The resulting forecast can be adjusted and stored in the expanded ARTREND table by name and loaded and PUT for properties. The Upgrade.exe utility will add the item CURVETYPE to this table for you. (more info)

Expanded Lookup Table The Lookup table capacity has been significantly expanded so you can use this feature to schedule many values for items such as product prices, price adjustment, and operating expenses using either formulas or lists. You also can “nest” sidefiles and lookup tables, including the use of @macros. Additionally, the editor is redesigned to be easier to use. (more info)

Econ Global Editor: Find Duplicate Keywords This new operation finds properties that have the same Keyword entered more than once with the same qualifier, without you having to specify what the keyword or qualifier is. For example two BTU lines with the same qualifier can have different values on them, or there could be two OPC/T lines with the same qualifier which would mean that their results would be added. (more info)

5000.1.11.0 of 35 June 2013


Econ Global Editor: Find Missing This new operation finds properties whose economic data lines in a specified section do not contain the specified keyword for any qualifier, for the specified qualifier for any keyword, or for the combination of the specified keyword and qualifier. (more info)

Econ Global Editor: Re-sequence Data Lines This new operation re-sequences the economic data lines within the specified data section. This process sorts all the lines by qualifier for all properties in the project. Non-qualified lines will move to the bottom. If a property is open in the editor when you perform the re-sequencing, it will be skipped.

You do not specify any additional values within the dialog. There is no matching of items or changing of qualifiers. Instead the data lines will be grouped by qualifier, in the same order within each group that existed before the re-sequencing. In the production section, CUMS line will appear with each group. The non-qualified lines will be grouped at the bottom of all your lines.

A message dialog appears after the process displaying the number of properties that were re-sequenced.

New ACR6 Tax Depreciation The Tax Relief Act of 2012 (passed in January, 2013) extended the 50 percent first year write-off bonus for investments placed in service during 2013. To specify this tax treatment for tangible investments enter the new depreciation method ACR6 in the Capital Recovery component of your input settings for the investment names to which it applies.

The ACR2 – ACR5 methods are still available to provide various first-year bonus depreciation amounts, depending on when investments are made and under which tax regime you want to run. If you specify ACR6 and the investment is made earlier, the depreciation treatment will roll back to ACR5, then ACR4, and so forth.

Disable Mass Econ Data Delete Your company can disable the Delete by Qualifier feature on the Economics Data menu for all users. This is done by your administrator, outside of ARIES, by entering the code number 8 for the new item ECONTROL in table TBLSETS for each table set in which the feature is to be deactivated. Normally there is only one table set, named ARIES.

Display ShowID for Group Name You can specify that the ShowID be displayed for groups instead of the usual group name. To do this mark the new Display ShowID’s for Group names check box on the DBS Properties dialog. Then enter the needed Master table ShowID items for each group.

“Refresh” Option to Include Group Memberships If the new check box on the Project Manager Preferences dialog is marked, the project Refresh feature (Picklist icon or menu) will refresh both the property ShowID information displayed for all the properties and groups and the property memberships for all the groups in the project. If it is not marked, the Refresh will only refresh the ShowID information displayed for the properties and groups.

5000.1.11.0 of 35 June 2013


Extendable Ratio Forecasts You can specify that the ending point for LIN TIME or LOG TIME producing ratio forecasts be ex-trapolated to later times, as needed to match an updated major phase forecast. You can either enter the new limit units that control this in the economic editor or instruct MultiGraph to use them automatically during a PUT. These ratio end point units are:

• MOX – Use to position the second ratio point value at a specific number of months relative to the START date, similar to MOS. The difference is that this unit allows the ratio forecast line to be extrapolated beyond this time point when needed. If you are using continuation lines, enter this unit only on the final line.

• ADX – Use to position the second ratio point value at an absolute date, similar to AD. The dif-ference is that this unit allows the ratio forecast line to be extrapolated beyond this date when needed. If you are using continuation lines, enter this unit only on the final line.

You instruct MultiGraph to use these when storing forecasts by selecting one of them from the graph scheme Global Forecast tab dropdown labeled PUT final TIME Ratio point at.

Commas in Graphs and Plots You can include commas in the production rate and volume results in the MultiGraph Results Box and the Plot Legends by marking the appropriate check boxes on the Graph and Plot Prefer-ences dialog.

Improved Text for Legend Ratios The Plot legend text for ratio curves is specific for Beginning Ratio, Ending Ratio, the type of correlation used, and the slope “m” of the forecast line.

Injection Well Count The injection well count entered on the third slot on the Miscellaneous section WELLS line has been added to the economics “M” Array as item M51. You can now include it on your Oneline re-ports or in the paragraph sections of your run-time economic reports. The suggested format is F4.0, or F6.2 if you want to show fractional counts if you will be doing weighting.

This count is added into the Well Count total item, M20, which will now include the total from oil, gas, and injection wells. Well counts scheduled using the WLS/INJ keyword are not included in M51.

MultiGraph PUT Keeps Non-qualified Lines On Bottom When you PUT forecasts from MultiGraph, these data lines are inserted above any non-qualified production lines. This means that generic lines, such as an NGL/GAS forecast, will remain below all the qualified lines so the calculation order is correct. This change was made in the update 5000.1.10.1.

Database Changes Several changes were made to the database tables for ARIES 5000.1.11.0 to accommodate enhancements, as described below.

5000.1.11.0 of 35 June 2013


Table – ARGRAPH added columns:

1. AUTOFILTERCRVS number – integer

2. AUTOFILTER number – integer

3. AUTOFILTERSENS number –integer

Table - ARLOOKUP added 23 more columns to the existing items VAR00 – VAR07

1. VAR08 text(20)

2. VAR09 text(20)

…….

22. VAR29 text(20)

23. VAR30 text(20)

Table – ARTREND added column

CURVETYPE text(4)

Table – DBSLIST added column

GRPSHOWID number – integer

Table - TBLSETS added columns

1. PCONTROL number – long integer

2. GCONTROL number – long integer

3. ECONTROL number – long integer

4. MCONTROL number – long integer

TABLE - ARIESSCHEMAVERSION updated column value after running Upgrade.exe

ARIESVERSION = 2008.50

5000.1.11.0 of 35 June 2013


OPTIONAL TABLE – AR_FCSTDATA (or AR_EQ_DATA) table for forecast equation parameters. The alias name for this table is FCST (entered in both ARSYSTBL and ARSYSCOL). The primary keys are PROPNUM, PHASE, QUALIFIER, and SEGMENT.

1. PROPNUM text(12)

2. PHASE text(12)

3. QUALIFIER text(12)

4. SEGMENT number – integer

5. STARTDATE date/time

6. ENDDATE date/time

7. PRODRATE number – double

8. UOM text(10)

9. DECLINERATE number – double

10. DECLINETYPE text(8)

11. BFACTOR number – double

12. STARTCUM number – double

We recommend that all users upgrade their current databases for these changes by running the Upgrade.exe utility that the installation places in the \Programs folder. Otherwise the new features will be disabled. The new ARIESSCHEMAVERSION is 2008.50.

We also updated the contents of the sample databases provided with the installation.

5000.1.11.0 of 35 June 2013


Defects Repaired The significant defects that are repaired between ARIES 5000.1.10.0 and 5000.1.11.0 are listed below. Many online Help topics were improved or corrected as well.

Defect ID Section Description

897214 Economics Abandonment investment with an escalation that is scheduled TO LIFE is not honoring the LIFE keyword entry.

874771 Economics ECON GROUP: CUMS and WELLS are not factored by a WEIGHT entered on the group

793483 Economics ARIES sets the IRR to zero when the PW becomes negative at a very high percentage rate

795528 Economics SIDEFILEs entered within a LOOKUP table do not work.

891728 Economics Interploation used for calculating the precise GRPLIFE date point can cause negative months

893276 Economics Prices entered using a formula mode line, list mode lines, and finally a formula mode line, gives the wrong prices for some properties when running a large number of properties at once.

893278 Economics Incremental forecasts - Total of two cases, one a copy of the other, run using factors of +1 and -1, do not show zero for operating costs.

894946 Economics The Line number in Economic Error Message when both Stretch time and exponent are unknown is truncated

897291 Economics Economics Expert Editor: please add 'ADX' to the list of available items in the List Common Units

898132 Economics Copy and Paste icons on ECON Toolbar are not visible

904501 Economics Economics Global Editor Search and Duplicate cannot find qualifiers that are just numbers.

909022 Economics Alberta gas cost allowance is being calculated too high during royalty holiday period.

148242 Economics ABAN/PLUG/SALV: EM table updated with a value every month, instead of just the abandonment month.

886819 Economics Economic Global Editor: the Qualifier columns does not show entire Qualifier on Confirm Global Edit dialog;

895882 Economics Economics crashes when a text field over 64 characters is used in a sidefile.

908568 MultiGraph The totaled secondary phase production is not correct in summary graph when using the option “Use all the qualifiers from Scenario”

896213 MultiGraph When printing a workspace consisting of two graph schemes that are different window sizes, whichever graph scheme that is not in focus will have issues with the text on the graph.

898131 MultiGraph Stretch Exponential Fit does not work if Monthly volumes are not entered as of the end of the month

5000.1.11.0 of 35 June 2013


898986 MultiGraph

When fitting a new Manual Line, the Adjust Forecast window does not change when the mouse is used to adjust the forecast. After clicking on OK or Apply, the forecast is set back to the original forecast when starting the manual line fitting.

899758 MultiGraph Graph Comments – unusual behavior occurs when user adds a comment when draw as opaque is unchecked

899765 MultiGraph Hyperbolic fit yields an error and does not fit if the Data Period in the table is not monthly

899926 MultiGraph Open graph: ARIES MG crashes when opening 2nd graph where graph window is maximized

901084 MultiGraph Hyperbolic fit routines allow b greater than 5.0

907092 MultiGraph Cannot open a Trend graph after closing a different one IF some other graph (like a Rate-Time) is open.

908625 MultiGraph Qualifier sequence is incorrect; when removing a newly created forecast then adding another new forecast, GET Qualifier name that already exists

894025 MultiGraph The current cursor position when right-clicking to create a new comment is not in correct spot if current curve is not the major phase.

894555 MultiGraph Multigraph may move blank qualified lines to top of production section on Put.

894622 MultiGraph Make the color boxes larger in the graphics combo boxes for color selection.

894858 MultiGraph Print Workspace does not honor the placement of the results box.

895065 MultiGraph Should not prompt to 'Put All current forecasts before changing properties" when no forecasts exist.

895549 MultiGraph Application crashes on second 'Put or Delete of forecast' in Multigraph.

896076 MultiGraph Adjusting a manual forecast, hyperbolic or line, with the arrow keys after applying, causes the Ref Date to jump one month in the past.

896841 MultiGraph MultiGraph cannot Get or Put a ratio forecast using ADX as an ending limit.

897269 MultiGraph Results Box: rounding error when getting results from Economics compare to prior baseline

897297 MultiGraph Manual Fitting: very hard to see Manual Fit line when several other forecast are loaded;

891280 MultiGraph GET: does not handle units of MU/D, MU/M or MU/Y units which are valid units in Economics;

889940 Project Manager

Import process continues even after an error message is thrown for incorrect First year of data to import.

892883 Project Manager Cannot import 98c files where state code is 0

5000.1.11.0 of 35 June 2013



Export to Excel: if last column has no data then that column does not get exported


If Master table is left open in editor during a project close and reopen, same project or not, it freezes and becomes uneditable.


When deleting a property or creating a breakpoint, the project is not flagged as needing to be saved


Economic Case data Export: get an error near the end of exporting a very large dataset.


The Sort, Select, Total function with the Properties Only option marked does not create a breakpoint node if the only match is within a Group, and some properties can be inserted individually below the Grand Total summary node,


A duplicated property appears in the Group, but the Update Current Group function does not reflect the duplicated entity in group total

908629 Reporting Report Formula Editor: dialog is currently resizable but really should not be since new info is added if size is increased;

895498 Upgrade Utility Upgrade.exe - Sidefiles that have excessive data lines cause other Sidefiles not to transfer to AR_SIDEFILE table.

892825 Upgrade Utility Upgrade utility does not work correctly if user has multiple tablesets going to schema version 2008.3 from 2008.2

897214 Economics Abandonment investment with an escalation that is scheduled TO LIFE is not honoring the LIFE keyword entry.

874771 Economics ECON GROUP: CUMS and WELLS are not factored by a WEIGHT entered on the group

793483 Economics ARIES sets the IRR to zero when the PW becomes negative at a very high percentage rate

795528 Economics SIDEFILEs entered within a LOOKUP table do not work.

891728 Economics Interpolation used for calculating the precise GRPLIFE date point can cause negative months

893276 Economics Prices entered using a formula mode line, list mode lines, and finally a formula mode line, gives the wrong prices for some properties when running a large number of properties at once.

893278 Economics Incremental forecasts - Total of two cases, one a copy of the other, run using factors of +1 and -1, do not show zero for operating costs.

894946 Economics The Line number in Economic Error Message when both Stretch time and exponent are unknown is truncated

897291 Economics Economics Expert Editor: please add 'ADX' to the list of available items in the List Common Units

898132 Economics Copy and Paste icons on ECON Toolbar are not visible

909022 Economics Alberta gas cost allowance is being calculated too high during royalty holiday period.

5000.1.11.0 of 35 June 2013


148242 Economics ABAN/PLUG/SALV: EM table updated with a value every month, instead of just the abandonment month.

886819 Economics Economic Global Editor: the Qualifier columns does not show entire Qualifier on Confirm Global Edit dialog;

895882 Economics Economics crashes when a text field over 64 characters is used in a sidefile.

896213 MultiGraph When printing a workspace consisting of two graph schemes that are different window sizes, whichever graph scheme that is not in focus will have issues with the text on the graph.

898131 MultiGraph Stretch Exponential Fit does not work if Monthly volumes are not entered as of the end of the month

898986 MultiGraph

When fitting a new Manual Line, the Adjust Forecast window does not change when the mouse is used to adjust the forecast. After clicking on OK or Apply, the forecast is set back to the original forecast when starting the manual line fitting.

899758 MultiGraph Graph Comment: a weird behavior occurs when user adds a comment when draw as opaque is unchecked;

899765 MultiGraph Hyperbolic fit yields an error and does not fit if the Data Period in the table is not monthly

5000.1.11.0 of 35 June 2013


Known Issues The following differences or behaviors are known to exist in 5000.1.11.0.

Defect ID Section Description

-- General – Windows 7

Must install 32-bit versions of .accdb drivers to run any database reports from Project Manager or to connect to .accdb databases. These are provided in the installation. Note that you cannot install both these drivers and the 64-bit drivers from Office 2010 at the same time. Both drivers exist on Office 2013.

-- General – Windows 7

DOS Dbase conversion Prep utility (used to ensure SEQNUMs are correct) does not work in Windows 7 x64. The Conversion works.

-- MultiGraph When viewing Preview Plot, do not navigate to another property directly – a blank plot will appear. Close the preview first.

837536 MultiGraph The O+G Prop Type entry on the Curves Tab is not used on Break Level Summary graphs because there is no major phase. Use ALL.


The Property Notes editor allows changing dates on existing Notes, which causes confusion and can result in duplicate key messages.


The Select By List feature will not match properties if the list items originated from a web page (HTML) or if it comes from Excel with embedded blanks in the items. A MS “non-blank” blank problem.


The Edit, Undo function does not update the Groups table for actions taken on ECON Groups. The Picklist reflects the Undo, but the ECON Group membership does not. Other group types are updated correctly.

802943 Economics Results of Econ Groups are included on a Summary only report

864272 Economics The Sidefile editor will let you enter or paste more than 100 data lines into a data section, which exceeds the line limit and will not run.

870238 Economics If RISK X is entered using a MIX line, the values for risked investments in C353 and C356 in the OL table are not correct

874769 Reporting

Production Ledger Report: You must always mark the Prior Data check box when creating these reports. Otherwise you will get the message “A Summary has been specified on a non-recurring field @prior_oil” message and get no Grand Total.

907448 Economics For LOSS BFIT, ELOSS PMAX, and ELOSS RMAX, the XINVWT or INVWT factors are not included in the profitability calculations.

899032 Economics Price Adjustment line with a 0 entry and a FRAC or % as units is ignored. Instead a 1.0 is substituted.

900506 Economics The maximum number of characters allowed is 20 when pasting data from Excel to fill out a Lookup Table. More characters may appear, but will not be used.

910283 Economics Incorrect income tax rate used at transition point when using the TAXP line to switch from one tax plan to a different one at a specified date that is not on a time frame boundary.

5000.1.11.0 of 35 June 2013


910660 Economics

If you schedule a three-segment forecast where the second line (incorrectly) ends before the first line ends, the third line will start at the second lines ending date, which is too early and results in double dippling the forecast in the overlapping period.

ARIES Modeler 5000.1.11 Release Notes The release concentrates on improvements in functionality and reliability plus new and improved sample models.

Modeler Enhancements Canadian Western Provinces Fiscal Models

New Modeler script functions to calculate royalties have been added for:

1. BC Oil & Gas 2. Alberta Crown Oil & Gas 3. Alberta Freehold Mineral Taxes 4. Saskatchewan Oil, Oil EOR and Gas 5. Manitoba Oil & Gas

These script functions and some related helper functions are located in the “cdn_setup” script model inside the “PSC_Samples.mdb” database. The functions are suitable for use in calculating royalties as part of a larger asset model, such as an unconventional resource play model, a field or processing plant or other customized uses. Alberta Well Case Sample The Alberta royalty routines have been incorporated in a well case model to calculate royalties and full cash flows for all phases and common price, cost, investment, and miscellaneous keywords. It works on the US stream set and can be included in the same project with US or other properties worldwide. A key difference of this model compared to the other PSC samples that ship with Modeler, is that this one uses the ARIES forecast gross monthly values as its input, and not the time frame data. All the calculations are done monthly for up to 100 years. Model Data tab for Alberta model:

5000.1.11.0 of 35 June 2013


Some reasons why using a modeler version for provincial royalty cases may useful:

1. Works with US stream set, projects and version files. 2. Use standard stream phases and ordering, no rigid requirement. 3. Does not require any of the Canadian output streams or work streams. 4. Complete calculation transparency, end users can see, and change, formulas. 5. No waiting for an ARIES release when one of the 4 Provinces enacts new laws. 6. Less knowledge of regulations required, royalty program limits are built in. 7. The exact same routines are used in unconventional resource play models. 8. Well case samples make an excellent starting point for custom economics. 9. Calculate and customize your US and Canadian income taxes in the model. 10. Use detailed Excel reports to examine and explain the calculations

Other New Samples The sample database, “monthly_script_demo.mdb” has been updated to include examples of:

1. A Model that replicates input summary data within a project. This makes it easier to build

platform allocation projects and works on any type of summary data including invest-ments, model data, and so forth.

2. Saving and restoring summary input data between project queries. This works like ex-port/import for summaries without need for a PROPNUM. It includes customizable logic to decide if summary is same or new

3. Loading all economic input data for wells and summaries for an entire project. This is useful if you need to do extensive calculations to support global economic data editing. It illustrates using a Modeler script to retrieve @M Master table macro data

The sample database, “PSC_Samples.mdb” has been updated to include examples of:

1. A Model that automatically dumps ARIES monthly streams to Excel. It captures all ARIES input and calculated monthly streams for 1,200 months and writes them to Excel, exclud-ing all zero streams.

5000.1.11.0 of 35 June 2013


2. Forecasting daily production from a partial month start date. It accepts a START date like “1-12-2013” that is used to do a daily primary phase production forecast for up to 100 years and output it to Excel.

Descriptions of all included samples, their documentation and files can be found in the document “ARIES_Modeler_Samples_Readme.docx” that is in the sample “AriesModeler_Samples.zip” and “International_Samples.zip” archives installed in the “..\Landmark\ARIES\DB” directory.

ARIES Modeler Defects Fixed since the 5000.1.10 release (June 2012)

Defect: 893450 - The “CopyExcelSheet” function may unpredictably (and rarely) fail if target sheet does not exist, in 5000.1.10.0 release only. Fixed in 5000.1.10.1 so that the sheet is copied to the target if it does not already exist, and silently not copied if it the target does. Defect: 892936 - Running a model that uses database functions gives an error if the Economics run log window is not closed between runs. Fixed in 5000.1.10.1. Defect: 896876 - The Modeler function “save_db_record” fails on Oracle or SQL Server if one of the keys is a date. Fixed in 5000.1.10.1. Defect: 902206 - Script Manager does not preserve model name case if loaded from log window error go to or if it is first script loaded from Model Data tab. Fixed. Defect: 902211 - Script Manager empties the windows clipboard when it is launched and uses the clipboard while loading models. Fixed. Defect: 902207 – The Script Manager "No Color" load preference does not cause fast model loading and still colorizes comments and edits. Fixed so that when “No Color” is selected even very large scripts will load quickly, and large paste operations are fast. Individual line item editing will still be colorized. Defect: 911550 - Add a DB setting to suppress the Economics modal warning that a Model is present but the license is not activated. For environments where the same input settings are used for cases with Models and those without, setting the MCONTROL field to 8 in the TBLSETS db table will disable the modal warning that users without an active Modeler license would receive if a Model was specified. Note, this means that users with Models will

5000.1.11.0 of 35 June 2013


NOT get the warning if they attempt to run cases with models but did not check out the Modeler license, resulting in incorrect results.

ARIES Modeler Known Problems

1. If a scripted case reports an error, and you then fix it in Script Manager but do not close the run log window, then subsequent executions of the same model fail to use the newly changed script. Workaround: Close the run log window after an economics execution that had edited script errors to force the modeler to reload scripts.

2. Text fields on the “MDATA_xxx” lines in a script file cannot contain imbedded commas,

even if the string is quoted. The commas are used as field delimiters.

3. The script function “getAriescap_bm” fails if a case has LOSS BFIT and EL for primary product and LIFE on investment line. If these 3 conditions are true, then investments with LIFE are not captured by the function.

5000.1.11.0 of 35 June 2013


Appendix – Details Major enhancements are discussed in detail in this section.

1 – Automatic Forecasting The AutoCast feature has been expanded to automatically perform curve fits and create new forecasts for all the marked properties and some types of groups in your Picklist. It is primarily intended to perform quick and easy initial forecasts for large numbers of properties, such as for a first look at an acquisition.

Please note that AutoCast is not a substitute for your forecasting judgment and is not intended for regular mainstream production and reserves work.

The AutoCast Update feature for creating new versions of existing forecasts by sliding down them to a new starting date remains.

The starting point for this operation is the set of active properties in your current project.

Running AutoCast

Select AutoCast from the File menu. You do not need to have a graph open. The following dialog appears:

Specify the options as described below and select OK to start the run. A run log window will appear to inform you of the progress. You can select the Cancel button to dismiss the dialog without doing the AutoCast. You can stop the AutoCast run in the middle by selecting the Stop Run button on the run log window.

Auto Forecast Options

Select the type of Auto forecast you wish to perform from these options:

5000.1.11.0 of 35 June 2013


• Fit and forecast – performs a decline curve fit using the specified methods, writes the fit pa-rameters and any messages to a run log, and stores the resulting forecasts in the economics data using the new qualifier. Results are written to the FCST table if it is present.

• Fit only – performs a decline curve fit using the specified methods and writes the fit parame-ters and any messages to a run log. No results are written to the economic data table. Re-sults are written to the FCST table if it is present.

• Update Start – creates new forecasts from existing forecasts by sliding along them to the new forecast START date, then storing the updated forecast parameters in the economics data using the new qualifier. Any existing forecasts that start after the new START date are assumed to be for new wells and are not shifted; they are stored as is with the new qualifier. Existing forecasts that end before the new START date are treated as abandoned, and no new forecast lines are stored.

Graph Scheme Basis

Select the rate-time or rate-cum graph scheme that specifies the curves you want to process, the old qualifier (if needed) and the new qualifier, and the new forecast START date. Information on the Structure and Appearance tabs does not affect this process. You can select the Edit button on the AutoCast dialog to open the graph scheme Global Forecast tab to modify related parameters there.

The Curves Tab

Enter the curves for which you want to apply the process. AutoCast will follow the “property type” logic for bringing in curves for each type of well. So you can have different sets of phase and ratio forecasts for gas wells versus oil wells. Some properties can have data for a phase, like water, while others do not.

When using the Update Start option, only those curves listed on the Curves tab will be updated, even if other phase forecasts for the specified qualifier exist in the economic data.

The Global Forecast Tab

You use this tab to control the initial data range lines, the start point, and the new forecast qualifier. For the Update Start option, you also specify the existing forecast qualifier to GET.

Initialize Section

The Set Walk point entry only matters if the Set START point value under Storing Forecasts below is entered as “Walk point”, which references this entry. Then the entry here will control the new Start for the forecasts.

For the options that include fitting, you can limit the historical data range used for the fit by selecting various options for the beginning and ending range lines, for example to use only the most recent 60 months of data.

IntelliFilter Section

For the AutoCast options that include fitting you can automatically apply the IntelliFilter prior to the fits by marking the Automatically apply IntelliFilter checkbox in this section. You can also specify other IntelliFilter options here.

5000.1.11.0 of 35 June 2013


Storing Forecasts Section

Specify the Set START point, either directly as a MM/YYYY date or indirectly through one of the other available options.

Specify the PUT Qualifier for the new forecast, either directly by name or indirectly through the current scenario. This entry should normally not be the same as the qualifier used for the GET qualifier in the Retrieving section below. Do not set it to PROMPT.

The settings for the PUT Phase forecasts as remaining reserves, PUT All always updates CUMS line, and PUT All when change property are not used.

The PUT final TIME Ratio point at selection will apply to new ratio forecasts.

Retrieving Forecasts Section

For the Update Start option, specify the GET Qualifier, either directly by name or indirectly through the current scenario. This entry should normally not be the same as the qualifier used for the Storing Forecasts entry. Do not set it to PROMPT.

For the Fit and Forecast or the Fit Only option, this entry is used only when the major phase fit method is specified as GET.

The setting for Automatically GET All forecasts is ignored.

Existing Forecast Data Lines

Specify here how to handle any existing forecast lines in the EC table when performing a Fit and Forecast. Select or enter one of the following:

• Leave - leaves all existing data lines in the production section as they are. The data lines from the AutoCast will be stored using the new PUT qualifier, overwriting the keywords that already use this PUT qualifier with the new forecast. Any lines not overwritten from the Auto-Cast will remain.

• Remove - removes all existing data lines in the production section that match the new PUT qualifier name. Then data lines from the AutoCast will be stored using the new PUT qualifier. This ensures that only the new phase and ratio forecast data lines from this AutoCast run will exist for the qualifier. You will see a confirmation message at run time informing you that some data lines may be removed. To continue, select Yes.

Auto Fit Methods

You specify here the fitting method to use for each of the curve types on the graph. These options are disabled if the Update Start option is specified above. The order in which the curves are fit is:

1. The major phase, as determined from your Master table property type 2. The ratio curves, as determined by the economic keywords having a “slash”, such as

OIL/GAS 3. The other phases which are not covered indirectly by any of the ratio phases

5000.1.11.0 of 35 June 2013


For example, on a gas well, the gas curve is forecast first, followed by the oil/gas yield curve. The oil curve is not forecast because that phase will be covered by the yield curve. If a water curve is included, and there is no ratio curve having water as the numerator, the water curve would be forecast.

If you have multiple ratio curves or other phase curves, they are processed in curve order based on where their Y-axes appear on the graph. The order is Left 1 through Left 4, then Right 1 through Right 4.

Major Phase Curve

For the property’s major phase curve you can choose from the following curve fitting options: Exponential, Hyperbolic, Harmonic, Cartesian, Stretched Exponential, Fixed Hyperbolic, GET, and None.

For the fixed hyperbolic option you will provide the exponent interactively when the AutoCast begins. If you enter a value of 1.0 the fit will change to harmonic. If you enter a value less than .0001, the fit will change to exponential.

The None option could be specified here when you only want to forecast secondary phases like water in the current session.

The GET option is available to simply load the major phase forecast so that other phases or ratios can be forecast from it or so fitting can be done on a rate-cum graph.

Ratio Curves

You select here the fitting method to use for forecasting ratios. Your choices are:

• LIN – produces a linear forecast of the ratio versus either time or cumulative major phase production, depending on the graph type.

• LOG – produces a log forecast of the ratio versus either time or cumulative major phase production, depending on the graph type.

• None – does not forecast any ratios

Other Phase Curves

You select here the fitting method to use for phases, other than the major, that you want to forecast directly, such as water. Your method options include exponential, hyperbolic, harmonic, Cartesian, stretched exponential, and none.

Remember that if you have a ratio curve containing one of these “other” phases in the numerator, that ratio will be forecast of the phase itself.

The Run Log

Information on the progress of the run is displayed in the log window. At the top it shows the type of AutoCast you are doing, the graph scheme, and the qualifier. For each curve processed a row displays either the fit result parameters or a message indicating why a fit could not be done. You can print this information or save it to a file by selecting the appropriate button.

5000.1.11.0 of 35 June 2013


You can also use the Stop Run button on this window to stop the run before all the properties are processed.

AutoCast Behavior

The feature options are designed for normal monthly production and ratio forecasts. One segment for each curve will be forecast, plus an exponential tail for hyperbolic or harmonic forecasts if specified.

The Update Start option only affects the dates for formula type production lines. It does not affect LIST mode production, prices, costs, ownership, or investments.

In addition to individual properties AutoCast processes other entity types as described below.

• Production and Pool Groups – the production for these groups is fit and forecast or up-dated like a property, but the production for their member properties is not. The well test information within pool groups is not processed.

• Econ Groups – these groups are neither fit and forecast nor updated. Their member properties are, using the GET and PUT qualifiers specified in the controlling graph scheme. Any qualifiers from individual scenarios assigned within the Picklist to individual members are ignored.

• Sigmas and Summary Groups – these entities are skipped.

Best Practices

1. The Fit and Forecast feature is intended for first looks at new properties such as for an ac-quisition. It should not be used on your mainstream properties. If you do, be careful with the qualifier you specify or backup your database first.

2. Generally you should use Fit and Forecast on all the phases and ratios at the same time, ra-ther than doing them piecemeal.

3. Use special qualifier names for storing the new forecasts, such as TEMP1, so you can easily find them later. This is especially important if you run the Fit and Forecast on your regular properties.

4. Avoid using the same qualifier for GETs and PUTs for the Update Start option. 5. The two fitting options use the un-culled data points between your range lines. You can set

these in the Global Forecast tab so that representative values are more likely to be used for fitting. Some approaches are:

a. Set the beginning range line to High Major plus x months to remove start up values b. Set the beginning range line to Last Actual less x months to use only the most re-

cent x months of data. c. Set IntelliFilter to be performed automatically

6. You generally should save the run log to a file after the run. This lets you easily search the text for words in the message items, such as for “major” phase fitting problems.

7. As in all batch type operations, if you are using an Access database, consider its size before you begin AutoCast on a large number of properties. You may want to compact it first.

5000.1.11.0 of 35 June 2013


2 – Intelligent Data Point Filtering To streamline forecasting, you can use the IntelliFilter data point filtering routine before you perform a curve fit. You can apply it to one or more of the monthly curves on a rate-time or rate-cum graph, or to the average curve on a Trend graph, It attempts to isolate the final production trend segment and remove outlying points.

IntelliFilter does not perform curve fitting or forecasting, but you can combine it with the AutoCast feature.

Filter applied to the OIL curve

The filter works on the current set of curve points, as limited by the range lines, as culled using one of the menu options, and as smoothed or averaged. The history points removed by the filter are redrawn as hollow symbols. The filtering works even if you do not have symbols specified, but you cannot see which points are removed.

IntelliFilter Controls

You control the IntelliFilter behavior and sensitivity from the IntelliFilter section of the Global Forecast tab in the graph scheme being used.

• The sensitivity choices are High, Medium, and Low and apply to both manual and automat-ic use. A higher setting uses tighter tolerances and generally results in filtering out more points.

• To automatically filter the major phase curve whenever you (or AutoCast) opens a graph or moves between properties, mark the Automatically apply IntelliFilter check box. This op-tion is not available for Trend graphs.

• To also automatically filter the other curves, select one of the options in the Non-major curves dropdown: No, Individual, or Mirror.

Manual Use

To filter the currently active curve, select IntelliFilter from the Curves menu, or press Ctrl+T. To apply it independently to another curve, activate that curve and select IntelliFilter again.

5000.1.11.0 of 35 June 2013


If you want to apply the same culling and filtering that currently exists on the major phase to another curve, activate that curve and select Mirror Major from the Curves, Cull Points sub-menu.

Automatic Use

Set the IntelliFilter controls as described above to automatically filter the curve(s) when either you navigate between properties or when you run AutoCast.

Restore Data Points

Filtered points are not removed from your data base. You can restore them to active status on your graph by selecting one of the Uncull options on the Curve, Cull Points menu or by refreshing the entire graph (F5).

3 – Expanded Trend Forecasting Trend forecasting has been enhanced to include stretched exponential decline fitting of the average curve points. The resulting forecast can be adjusted and stored in the expanded ARTREND table by name and loaded into properties. The Upgrade.exe utility will add the item CURVETYPE to this table for you.

To provide you more information generally and to handle the “origin” point for SED forecasts the store and load dialogs have changed.

Store Trend Forecast

This revised dialog now shows the type of curve being stored, such as EXP, and its “origin” information.

The month number is the first point of the trend curve that will be stored. This is the “origin” of the type curve that you will use for new forecasts. You control this with the Set Forecast START entry on the Trend curve Global Forecast tab. Here the month shown is 13, meaning that this is the point from which the curve will be stored. For SED type forecasts, you should set this to be the first point included in the fitting.

The Qo value is the monthly production rate at the origin month displayed above. You can leave the initial value from the fit that is shown, or enter another value to use when storing. You can also change this later when you load and PUT this forecast for a specific property.

5000.1.11.0 of 35 June 2013


For SED forecasts the stretch exponent is stored in ARTREND as EXPONENT, and tau is stored as DECLINE.

Load Trend Forecast

After you have opened a rate-time graph for the target property and selected Load Trend Forecast, the revised dialog appears.

It contains the Trend curve origin information described above, plus two items that set where the beginning of the trend curve will be positioned when it is displayed on the graph. This is not necessarily where you will start the final forecast; you control that when you perform the PUT later.

The Date is the x-axis point at which to position the beginning of the incoming trend curve. You can enter a date, as mm/yyyy, or select one of the automatic options from the drop down: Beginning Range Line, Ending Range Line, Last Actual, or Walk Point.

The Qi is the y-axis monthly production rate for the trend curve at the date above. This value is initially the Qo value from the stored curve as shown above. You can leave this value, or enter a new value to shift the curve up or down.

After you select OK the trend forecast becomes the forecast for the active curve. To save it to the economic data you use the regular PUT … feature, adjusting the START date and the associated initial rate if needed, and specifying a qualifier.

4 – Expanded Lookup Table

The Lookup table capacity has been significantly expanded so you can use this feature to schedule many values for items such as product prices, price adjustment, and operating expenses using either formulas or lists. You also can “nest” sidefiles and lookup tables, including the use of @macros.

Additionally, the editor is redesigned to be easier to use, as shown below for a price adjustment table.

5000.1.11.0 of 35 June 2013


The Template Line Section

The top section contains the economic data template lines with question marks indicating where values produced by the lookup process will be inserted. It contains eight columns and up to 50 rows. Entries on these lines can be up to 20 characters. You may omit trailing entries.

The order of these questions marks sets the order of the answer columns needed in the Lookup Data section below. The number of question marks entered (up to a maximum of 30).must equal the total number of Constant, Numeric, Text, and PassThru columns defined in the Data Lines section.

Remember that the overall data line limit in any economics data section is 100, and each of these templates lines counts.

The Lookup Data Section

The lower section contains the lookup data. This section can now contain up to 31 columns, allowing for example, one match column and 30 answer columns. The first row holds the cosmetic headings, where you enter up to 20 characters of text with no spaces. In the second row you use the drop downs to select the type of data in each column. These types define how the lookup will work.

The third and subsequent rows contain the lookup data and the answer data. You can type or paste this data into the cells, rows, and columns from the clipboard. These entries can contain up to 20 characters. Each row must contain an entry for every column that has a type selected, and there must be an answer column for each question mark in the template lines section.

The Upgrade.exe utility program provided with the release will expand your existing ARLOOKUP table from the current eight columns to 31 columns. You can enter as many rows in the lower section as needed.

5000.1.11.0 of 35 June 2013


You can delete the contents of a COLUMN by highlighting it and pressing Del, but this will not remove the column itself. To remove the gap, copy the remaining block of columns to the right, move to the left one column, and paste. To delete a ROW, highlight it and press Del. The contents and the row itself will be removed.

Combining Lookups and Sidefiles

You can combine, or nest, the Lookup and Sidefile data entry features. A Sidefile is a set of related economic data lines that is named and stored in the database, then used in multiple economics cases by referencing its name in each case’s data.

The word SIDEFILE can be included within Lookup tables as the first entry on a template line. The Sidefile name following it on the template line can be entered explicitly, or can be a question mark, meaning that it will be provided from one of the answers in the lookup data items. A data line within a Sidefile can be a LOOKUP line, complete with the needed table name and parameters.

These Sidefiles and Lookups can both contain @macro references to retrieve values from the Master table. The features will process these @macros multiple times to resolve them, up to two levels deep. Thus you can have

• A Sidefile that contains @macros and a Lookup call where the lookup parameters contain @macros

• A Lookup with @macros that points to a Sidefile, whose lines also contain @macros

You cannot nest a Sidefile within the same Sidefile or nest a Lookup table within the same Lookup table.

The order of processing these is:

1. All the case data line Sidefiles are read and their data lines brought in 2. Any @macros on these data lines are resolved 3. All the case data line Lookup table calls are read and their resulting data lines are

brought in 4. Any @macros on these data lines are resolved 5. Any Sidefiles that have come from the Lookup data in #3 are read and their data lines

brought in 6. Any @macros on these data lines are resolved 7. Any Lookup table calls that have come from the Sidefile data in #5 are read and their re-

sulting data lines brought in 8. Any @macros on these data lines are resolved

5 – Econ Global Editor: Find Duplicate Keywords

This new operation finds properties that have the same Keyword entered more than once with the same qualifier, without you having to specify what the keyword or qualifier is. For example two BTU lines with the same qualifier could have different values on them, or there could be two OPC/T lines with the same qualifier which would mean that their results would be added.

5000.1.11.0 of 35 June 2013


Only the Qualifier row is active, and the IF comparison is always set to EQ. The Qualifier can be left blank to search all qualifiers. To include unqualified data lines in the search, mark the check box at the upper right of the dialog.

The START lines, TEXT lines, lines beginning with an asterisk, and continuation (“) lines are not searched. For the keywords of LOOKUP, SIDEFILE, FILE, and LOAD the data line value following it is included with the keyword in the matching.

Select OK to begin the search. A message will appear summarizing the findings and asking if you want to write the list of properties to a file. Select Yes to write the .csv log file, which will contain rows similar to the following:

Propnum, ShowID “Duplicate keyword BTU for qualifier XYZ”

You can then easily create a project containing these properties for correcting your data.

6 – Econ Global Editor: Find Missing

This new operation finds properties whose economic data lines in a specified section do not contain the specified keyword for any qualifier, for the specified qualifier for any keyword, or for the combination of the specified keyword and qualifier.

For example, you can find properties that do not contain a Miscellaneous section BTU line, or that do not contain the qualifier XYZ, or that do not contain a BTU line qualified with XYZ. You can also find properties that do not contain an Investment section name of EQUIP, or to find properties that do not have an OWNER1 qualifier in the Ownership section.

Only the Keyword and Qualifier rows are active, and the IF comparisons are always set to EQ. You enter the keyword for which to search, or the qualifier for which to search, or both.

Select OK to begin the search. A message will appear summarizing the findings and asking if you want to write the list of properties to a file. Select Yes to write the .csv log file, which will contain the list of Propnum and ShowIDs for the properties that are missing the specified item. You can then easily create a project containing these properties for correcting your data.

5000.1.11.0 of 35 June 2013


Contacting Support

Landmark software operates Technical Assistance Centers (TACs) in Australia, the United Kingdom, and the United States for program-level assistance. Additional support is also provided through local support offices around the world. Assistance for custom network installations or Oracle or SQL Server database environments is available through the Consulting Services group.

Local support office information is listed below.

Support information is always available on the Landmark Support internet page located at:

http://css.lgc.com/InfoCenter/index?page=home.

Technical Assistance Centers

North America 7:30 am - 5:30 pm Central Standard Time Monday - Friday, excluding holidays

713-839-2200 (Houston, TX, USA) Toll Free 1-877-435-7542 (1-877-HELP-LGC) Fax: 713-839-2168 (Houston, TX) Fax: 907-275-2655 (Anchorage, AK) Fax: 303-796-0807 (Denver, CO) Fax: 403-262-1929 (Calgary, Canada) Email: [email protected]

Helpful Internet Links Name Website Address

Landmark Software & Services home page http://www.halliburton.com/landmark

Landmark Support Portal http://css.lgc.com/InfoCenter/index?page=home

Oracle home page http://www.oracle.com

FLEXNet Publisher (Flexera Software) http://www.flexera.com

Microsoft SQL Server home page http://www.microsoft.com/sqlserver

Microsoft SQL Server Express home page http://www.microsoft.com/express/sql

Adobe Acrobat Reader http://www.adobe.com

5000.1.11.0 of 35 June 2013

http://css.lgc.com/InfoCenter/index?page=home

mailto:[email protected]

http://www.halliburton.com/landmark

http://css.lgc.com/InfoCenter/index?page=home

http://www.oracle.com/

http://www.flexera.com/

http://www.microsoft.com/sqlserver

http://www.microsoft.com/express/sql

http://www.adobe.com/


© 2013 Halliburton All Rights Reserved

This publication has been provided pursuant to an agreement containing restrictions on its use. The publication is also protected by Federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic, magnetic, manual, or otherwise, or disclosed to third parties without the express written permission of:

Halliburton | Landmark Software & Services 2107 CityWest Blvd, Building 2, Houston, Texas 77042-3051, USA

P.O. Box 42806, Houston, Texas 77242, USA Phone:713-839-2000, FAX: 713-839-2015 Internet: www.halliburton.com/landmark

Trademarks 3D Drill View, 3D Drill View KM, 3D Surveillance, 3DFS, 3DView, Active Field Surveillance, Active Reservoir Surveillance, Adaptive Mesh Refining, ADC, Advanced Data Transfer, Analysis Model Layering, ARIES, ARIES DecisionSuite, Asset Data Mining, Asset Decision Solutions, Asset Development Center, Asset Development Centre, Asset Journal, Asset Performance, AssetConnect, AssetConnect Enterprise, AssetConnect Enterprise Express, AssetConnect Expert, AssetDirector, AssetJournal, AssetLink, AssetLink Advisor, AssetLink Director, AssetLink Observer, AssetObserver, AssetObserver Advisor, AssetOptimizer, AssetPlanner, AssetPredictor, AssetSolver, AssetSolver Online, AssetView, AssetView 2D, AssetView 3D, BLITZPAK, CasingLife, CasingSeat, CDS Connect, Channel Trim, COMPASS, Contract Generation, Corporate Data Archiver, Corporate Data Store, Data Analyzer, DataManager, DataStar, DBPlot, Decision Management System, DecisionSpace, DecisionSpace 3D Drill View, DecisionSpace 3D Drill View KM, DecisionSpace AssetLink, DecisionSpace AssetPlanner, DecisionSpace AssetSolver, DecisionSpace Atomic Meshing, DecisionSpace Desktop, DecisionSpace Nexus, DecisionSpace Reservoir, DecisionSuite, Deeper Knowledge. Broader Understanding., Depth Team, Depth Team Explorer, Depth Team Express, Depth Team Extreme, Depth Team Interpreter, DepthTeam, DepthTeam Explorer, DepthTeam Express, DepthTeam Extreme, DepthTeam Interpreter, Desktop Navigator, DESKTOP-PVT, DESKTOP-VIP, DEX, DIMS, Discovery, Discovery 3D, Discovery Asset, Discovery Framebuilder, Discovery PowerStation, DMS, Drillability Suite, Drilling Desktop, DrillModel, Drill-to-the-Earth-Model, Drillworks, Drillworks ConnectML, Drillworks Predict, DSS, Dynamic GeoModeling, Dynamic Reservoir Management, Dynamic Surveillance System, EarthCube, EDM, EDM AutoSync, EDT, eLandmark, Engineer's Data Model, Engineer's Desktop, Engineer's Link, ESP, Event Similarity Prediction, ezFault, ezModel, ezSurface, ezTracker, ezTracker2D, FastTrack, Field Scenario Planner, FieldPlan, For Production, FrameBuilder, FZAP!, GeoAtlas, GeoDataLoad, GeoGraphix, GeoGraphix Exploration System, GeoLink, Geometric Kernel, GeoProbe, GeoProbe GF DataServer, GeoSmith, GES, GES97, GESXplorer, GMAplus, GMI Imager, Grid3D, GRIDGENR, H. Clean, Handheld Field Operator, HHFO, High Science Simplified, Horizon Generation, I2 Enterprise, iDIMS, Infrastructure, Iso Core, IsoMap, iWellFile, KnowledgeSource, Landmark (as a service), Landmark (as software), Landmark Decision Center, Landmark Logo and Design, Landscape, Large Model, Lattix, LeaseMap, LithoTect, LogEdit, LogM, LogPrep, Make Great Decisions, MathPack, MDS Connect, MicroTopology, MIMIC, MIMIC+, Model Builder, NETool, Nexus (as a service), Nexus (as software), Nexus View, Object MP, OpenBooks, OpenJournal, OpenSGM, OpenVision, OpenWells, OpenWire, OpenWire Client, OpenWire Server, OpenWorks, OpenWorks Development Kit, OpenWorks Production, OpenWorks Well File, PAL, Parallel-VIP, Parametric Modeling, Permedia, PetroBank, PetroBank Explorer, PetroBank Master Data Store, PetroStor, PetroWorks, PetroWorks Asset, PetroWorks Pro, PetroWorks ULTRA, PlotView, Point Gridding Plus, Pointing Dispatcher, PostStack, PostStack ESP, PostStack Family, Power Interpretation, PowerCalculator, PowerExplorer, PowerExplorer Connect, PowerGrid, PowerHub, PowerModel, PowerView, PrecisionTarget, Presgraf, PressWorks, PRIZM, Production, Production Asset Manager, PROFILE, Project Administrator, ProMAGIC, ProMAGIC Connect, ProMAGIC Server, ProMAX, ProMAX 2D, ProMax 3D, ProMAX 3DPSDM, ProMAX 4D, ProMAX Family, ProMAX MVA, ProMAX VSP, pSTAx, Query Builder, Quick, Quick+, QUICKDIF, Quickwell, Quickwell+, Quiklog, QUIKRAY, QUIKSHOT, QUIKVSP, RAVE, RAYMAP, RAYMAP+, Real Freedom, Real Time Asset Management Center, Real Time Decision Center, Real Time Operations Center, Real Time Production Surveillance, Real Time Surveillance, Real-time View, Reference Data Manager, Reservoir, Reservoir Framework Builder, RESev, ResMap, RTOC, SCAN, SeisCube, SeisMap, SeisModel, SeisSpace, SeisVision, SeisWell, SeisWorks, SeisWorks 2D, SeisWorks 3D, SeisWorks PowerCalculator, SeisWorks PowerJournal, SeisWorks PowerSection, SeisWorks PowerView, SeisXchange, Semblance Computation and Analysis, Sierra Family, SigmaView, SimConnect, SimConvert, SimDataStudio, SimResults, SimResults+, SimResults+3D, SIVA+, SLAM, SmartFlow, smartSECTION, smartSTRAT, Spatializer, SpecDecomp, StrataAmp, StrataMap, StrataModel, StrataSim, StratWorks, StratWorks 3D, StreamCalc, StressCheck, STRUCT, Structure Cube, Surf & Connect, SurfNet, SynTool, System Start for Servers, SystemStart, SystemStart for Clients, SystemStart for Servers, SystemStart for Storage, Tanks & Tubes, TDQ, Team Workspace, TERAS, T-Grid, The Engineer's DeskTop, Total Drilling Performance, TOW/cs, TOW/cs Revenue Interface, TracPlanner, TracPlanner Xpress, Trend Form Gridding, Trimmed Grid, Turbo Synthetics, Unconventional Essentials,

5000.1.11.0 of 35 June 2013


VESPA, VESPA+, VIP, VIP-COMP, VIP-CORE, VIPDataStudio, VIP-DUAL, VIP-ENCORE, VIP-EXECUTIVE, VIP-Local Grid Refinement, VIP-THERM, WavX, Web Editor, Well Cost, Well H. Clean, Well Seismic Fusion, Wellbase, Wellbore Planner, Wellbore Planner Connect, WELLCAT, WellDirect, WELLPLAN, WellSolver, WellXchange, WOW, Xsection, You're in Control. Experience the difference, ZAP!, ZetaAnalytics, and Z-MAP Plus are trademarks, registered trademarks, or service marks of Halliburton.

All other trademarks, service marks, and product or service names are the trademarks or names of their respective owners.

Note The information contained in this document is subject to change without notice and should not be construed as a commitment by Halliburton. Halliburton assumes no responsibility for any error that may appear in this manual. Some states or jurisdictions do not allow disclaimer of expressed or implied warranties in certain transactions; therefore, this statement may not apply to you.

Third Party Licenses and Attributions Halliburton acknowledges that certain third party code has been bundled with, or embedded in, its software. The licensors of this third party code, and the terms and conditions of their respective licenses, may be found at the following installation location:

Landmark\ARIES\Help\Third_Party.pdf

Disclaimer The programs and documentation may provide links to external web sites and access to content, products, and services from third parties. Halliburton is not responsible for the availability of, or any content provided on, third party web sites. You bear all risks associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is directly between you and the third party. Halliburton is not responsible for: (a) the quality of third party products or services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations related to purchased products or services. Halliburton is not responsible for any loss or damage of any sort that you may incur from dealing with any third party.

5000.1.11.0 of 35 June 2013

ARIES™ Software Version 5000.1.11

Documents

Transcript of ARIES™ Software Version 5000.1.11