Are Industry Lighting Metrics Fit for Purpose?
71
-
Upload
cindy-foster-warthen -
Category
Technology
-
view
278 -
download
2
Transcript of Are Industry Lighting Metrics Fit for Purpose?
Are lighting industry
metrics fit for purpose?
Paul Taylor
Dyson
Credit(s) earned on completion of this course will be
reported to AIA CES for AIA members. Certificates of
Completion for both AIA members and non-AIA
members are available upon request.
This course is registered with AIA CES for
continuing professional education. As such, it does
not include content that may be deemed or
construed to be an approval or endorsement by the
AIA of any material of construction or any method or
manner of
handling, using, distributing, or dealing in any
material or product.
___________________________________________
Questions related to specific materials, methods, and services will
be addressed at the conclusion of this presentation.
Abstract
Lighting technology is advancing far faster than the metrics used to
define lighting and we have a rare opportunity to redefine lighting
for the better. In this talk we will dig deep into existing lighting
metrics and regulations and question if they need to change to be
more human centric.
The problems lighting industry metrics and regulations have caused in artificially
lit environments.
How we ‘unlearned’ the importance of natural light.
Why and how some widely used metrics such as UGR (unified glare rating) may
no longer be fit for purpose when using LEDs instead of legacy light sources.
Why designing luminaires for with LEDs requires new optical approaches and
form factors.
Insight into why the lighting industry needs to go beyond technological
improvement and put the human at the centre of lighting design.
Learning points
Spectral
Distribution
Efficiency Glare
Spatial
Distribution
Timing and
Control
Regulations
Lighting Industry Metrics
This concludes The American Institute of Architects
Continuing Education Systems Course
