Arduino Leonardo
-
Upload
yaser-shaikh -
Category
Documents
-
view
10 -
download
4
description
Transcript of Arduino Leonardo
Robomart.comhttp://www.robomart.com/
PRODUCT NAME : Arduino Leonardo
MODEL : RM0505
PRICE : Rs 0.00
SKU : RM0505
WEIGHT : 0
STOCK : Out Of Stock
MANUFACTURER : Robosapiens India
DIMENSIONS(LxWxH) : 0 x 0 x 0
DESCRIPTION
The Arduino Leonardo is a microcontroller board based on the ATmega32u4 . It has 20 digital input/output pins , a 16 MHz crystaloscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support themicrocontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. TheLeonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for asecondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to avirtual (CDC) serial / COM port. It also has other implications for the behavior of the board.The Arduino Leonardo can be powered via the micro USB connection or with an external power supply. The power source isselected automatically.External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adaptercan be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted inthe Gnd and Vin pin headers of the POWER connector.The board can operate on an external supply of 6 to 20 volts. If suppliedwith less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, thevoltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.
Features:
Microcontroller : ATmega32u4Operating Voltage : 5VInput Voltage : 7-12VInput Voltage (limits) : 6-20VDigital I/O Pins : 20PWM Channels : 7Analog Input Channels : 12DC Current per I/O Pin : 40 mADC Current for 3.3V Pin : 50 mAFlash Memory : 32 KBSRAM : 2.5 KB (ATmega32u4)EEPROM : 1 KB (ATmega32u4)Clock Speed : 16 MHz
Specification
General Characteristics
1 / 2
Robomart.comhttp://www.robomart.com/
Type Development Board
Product ID RM0505
Dimension (68.58 X 53.34)mm
Package 44-lead TQFPControl Circuit
Controller ATmega32u4
Clock Frequency Industrial range 8 MHz at 2.7V 16 MHz at 4.5V
Data Communication Serial / Parallel
Motor Driver N / A
Sensor Interface Analog Sensors
Display On Board LEDs for Data Communication
Parallel Interface 20 Programmable parallel I/O Line
Serial Interface One Full Duplex USART Port (Rx , Tx)
Programming Mode USB using BootLoader & ISP
Programming Interface Micro USB B type Connector
Supported Programmers USB Cable using BootLoader
Softwares Required Arduino BETA Version
Input Devices External I / O devices can be connected.
Cell Phone Controlled N / A
External InterruptSource
External and Internal
Power Supply
Type DC
Operating Voltage 2.7 - 5.5V
Operating Current 300mA
Socket DC Jack and Micro USB B type Connector
Powered by TCPDF (www.tcpdf.org)
2 / 2