Arbeiten mit Konturelementen durch CADENAS 06.02
Transcript of Arbeiten mit Konturelementen durch CADENAS 06.02
Arbeiten mit Konturelementen durch CADENAS
06.02.2007
We are a Key Member of the Global Network
Michael ReberLeiter Konstruktion CADARRK Design&Development
Renè TittmannKonstruktion CADENASARRK Design&Development
20.02.2007 We are a Key Member of the Global Network 2
Key Figures
Founded in: 1886
Employees: 230
Annual turnover: 35 Mio. EURO
Customers:
AUDI BENTLEY BMW DAIMLER CHRYSLER OPEL PORSCHE VOLVO VW…
20.02.2007 We are a Key Member of the Global Network 3
1886 FoundationCore business was the manufacturing of models and dies for the casting industry
1976 Starting of large-size mould manufacturing
1998 A Dutch investor takes over 100% of the shares.Restructuring and modernisation of the company
2002 Foundation of ATS Automotive Division and out of that created the new companies ATS Design & Development GmbH and ATS Automotive Projects GmbH
2003 Extensive investments in new machine equipment Improvement in quality and on time delivery
2004 Reduction of delivery timesDevelopment of new tool concepts.
2005 ARRK Product Development Group takes over ATS B.V. the parent company of ATS Germany GmbH & Co. KG
1911
2005
20.02.2007 We are a Key Member of the Global Network 4
Concept Studies (Feasibility)
Tool- / Part-Design
Prototype Tooling (Aluminium or Steel-Tools)
Production Tooling
· Injection Moulding-Tools · Press-Tools
After-Sales Services (24 hours worldwide)
Trials and Low Volume Productions
(3000/4000 Tons Injection Moulding Machines)
20.02.2007 We are a Key Member of the Global Network 5
Netherlands B.V.
20.02.2007 We are a Key Member of the Global Network 6
CAD/CAM List
CATIA V4 / V5
Unigraphics NX2 / NX4
CADENAS
AutoCAD
WorkNC
RTM
DEPO-CAM
Moldflow
Coolflow
20.02.2007 We are a Key Member of the Global Network 7
Exterieur
Bumpers Spoilers Fenders Rubstribs Body-Panels Bonnets
Interieur
Instrument Panels A- / B- / C-Pillars Centre Consoles
AUTOMOTIVE NON AUTOMOTIVE
Trash cansCover platePallets
20.02.2007 We are a Key Member of the Global Network 8
20.02.2007 We are a Key Member of the Global Network 9
Neue Konstruktionsmethodik bei Neue Konstruktionsmethodik bei WerkzeugkonstruktionenWerkzeugkonstruktionen
20.02.2007 We are a Key Member of the Global Network 10
Aufbau der ARRK ZIMMERMANN - Normteile in CADENAS
20.02.2007 We are a Key Member of the Global Network 11
Zielsetzung, komplexe Baugruppen mit CADENAS
20.02.2007 We are a Key Member of the Global Network 12
Entwicklung des ersten Assistenten von & mit CADENAS 2003
20.02.2007 We are a Key Member of the Global Network 13
Aufbau weiterer Baugruppen in CADENAS
20.02.2007 We are a Key Member of the Global Network 14
Entwicklung des ersten Assistenten für das komplexe ARRK ZIMMERMANN Stammgestell
20.02.2007 We are a Key Member of the Global Network 15
ARRK ZIMMERMANN - Stammgestell Berechnung und Aufbau über CADENAS
20.02.2007 We are a Key Member of the Global Network 16
Konstruktionsmethodik ARRK Design & Development
20.02.2007 We are a Key Member of the Global Network 17
Entwicklung und Aufbau weiterer Werkzeugkonzepte als Baugruppen inkl. Assistenten
20.02.2007 We are a Key Member of the Global Network 18
Aufbau kompletter kundenspezifischer Baugruppen
20.02.2007 We are a Key Member of the Global Network 19
Neue EntwicklungstNeue Entwicklungstäätigkeiten 2006 / 2007 mit CADENAStigkeiten 2006 / 2007 mit CADENAS
ARBEITEN MIT KONTURELEMENTEN DURCH CADENASARBEITEN MIT KONTURELEMENTEN DURCH CADENAS
20.02.2007 We are a Key Member of the Global Network 20
Geringe Durchdringungstiefe des Standards bei einigen Schlüsselbauteilen des Formaufbaus.
20.02.2007 We are a Key Member of the Global Network 21
Studien, Entwürfe & Überlegungen ... 2006
20.02.2007 We are a Key Member of the Global Network 22
Studien, Entwürfe & Überlegungen ... 2006
20.02.2007 We are a Key Member of the Global Network 23
Erste 3D Vorstellungen 2006
Start Entwicklungsprojekt 20063D Konturelemente in CADENAS
20.02.2007 We are a Key Member of the Global Network 24
Beispiel Messbasis
20.02.2007 We are a Key Member of the Global Network 25
Erste 3D Vorstellungen 2006
20.02.2007 We are a Key Member of the Global Network 26
Starten des Pilotprojektes mit CADENAS 2006
20.02.2007 We are a Key Member of the Global Network 27
Erste Entwicklungsstufen 2006
20.02.2007 We are a Key Member of the Global Network 28
20.02.2007 We are a Key Member of the Global Network 29
Vollständiges zu erwartendes Ergebnis nach Abschluss des Projektes 2007
20.02.2007 We are a Key Member of the Global Network 30
Erwartungen in diese Entwicklung :•Reduktion der Konstruktionszeiten.
•Reduktion der Fehlermöglichkeiten.
Geplante Weiterentwicklung :
• Durch die Integration der 3D Meßpunkte im CADENAS werden zukünftig weitere und detailliertere Konstruktionserleichterungen den CAD Anwendern zur Verfügung stehen.
•Die Ausweitung dieser Methodik auf weitere konturabhängige Bauteile ist geplant.
•Selbst komplizierteste Schieberlösungen könnten aus unserer Sicht mit dieser Methodik im CADENAS für die CAD - Anwendung zukünftig zur Verfügung stehen.
Vielen Dank für Ihre Aufmerksamkeit
06.02.2007
We are a Key Member of the Global Network
Michael ReberLeiter Konstruktion CADARRK Design&Development
Renè TittmannKonstruktion CADENASARRK Design&Development