PUBLIC UTILITIES DEPARTMENT

CITY OF SAN DIEGO

APPROVED MATERIALS LIST

FOR WASTEWATER

AGNES GENEROSO

DEPUTY DIRECTOR

WASTEWATER COLLECTION

SURRA YA RASHID

DEPUTY DIRECTOR

ENGINEERING & PROGRAM MANAGEMENT

RANIA AMEN

ASSISTANT DIRECTOR

SYSTEM MANAGEMENT & OPERATIONS

May 2018

SUBJECT SPEC. REF

A. Sewer Pipes

l. Vitrified Clay 207-8 Extra Strength ASTMC 700 Pipe and Fittings

2. PVC Sewer 207-17 Pipe and ASTMD 3034 Fittings- SDR-35 Gasket Joints 4 thru 15 inches diameter

PUBLIC UTILITIES DEPARTMENT

CITY OF SAN DIEGO

APPROVED MATERIALS LIST

FOR MUNICIPAL SEWER

May 2018

MANUFACTURER SELECTION (Series/Model No.)

Pacific Clay Pipe D

Gladdin and McBean D

Mission Clay D

J-M D

Certain Teed D

Vinyltech Corporation D

Northern Pipe Products D

Diamond Plastics D Corporation

North American Pipe D Corporation

ADDITIONAL REQUIREMENTS

Plain End and Bell and Spigot Type Pipe

Green Bell

Phoenix, Arizona Plant

Fargo, North Dakota Plant

Casa Grande, Arizona (primary plant) Grandlsland, Nebraska (secondary plant)

Yucca, Arizona (primary plant) Wichita Falls, Texas (secondary plant)

*References are to the current edition of the Standard Specifications for Public Works Construction, the "GREENBOOK", and/or the "WHITEBOOK" or the latest version of the ASTM Specifications.

Any projects funded by the Clean Water State Revolving Fund (CWSRF) and/or Drinking Water State Revolving Fund (DWSRF) require iron and steel products must be produced in the United States to meet the "American Iron and Steel (AIS)" requirements, unless the Environmental Protection Agency (EPA) waives the AIS requirement.

Revised May 2018

-Page 1-

SUBJECT SPEC. MANUFACTURER SELECTION ADDITIONAL REF (Series/Model No.) REQUIREMENTS

A. Sewer Pipes (cont.)

3. PVC Sewer 207-17 J-M D *Up to 30-inch pipe Pipe and ASTM F 679 Fittings- Certain Teed D *Up to 30-inch pipe Gasket Joints 18 thru 36 inch Vinyltech Corporation D Phoenix, Arizona Plant diameter *18-inch pipe only

Northern Pipe Products D Fargo, North Dakota Plant *up to 24-inch pipe

Diamond Plastics D Casa Grande, Arizona Corporation (primary plant)

Grandlsland, Nebraska (secondary plant)

North American Pipe D Yucca, Arizona (primary Corporation plant)

Wichita Falls, Texas (secondary plant)

4. Fusible PVC *209-8 Underground Solutions D Yucca, AZ Plant Sewer Pipe- AWWAC900 4 thru 36 inch (4"-12") diameter AWWAC905

(14"-36") 5. Fiberglass 207-20, US Composite Pipe South - D Zachary , Louisiana Plant

Reinforced ASTM D3262 Flowtite (FRPM) Pipe Polymer Mortar (gravity *Resin: Only vinyl ester (FRPM) Sewer sewer) resin is approved. Use of Pipe any other resin is strictly

prohibited.

6. Centrifugally 207-20, Hobas Pipe USA D Houston, Texas Plant Cast Fiberglass ASTM D3262 Reinforced (gravity *Direct bury installations Polymer Mortar sewer) (CCFRPM) Sewer Pipe

7. Polymer ASTMD6783 Meyer Polycrete Pipe D Zachary, Louisiana Plant Concrete Sewer Pipe ( 4 thru 36 *Resin: Only Dion Impact inch diameter) 9133-055 Epoxy Vinyl

Ester Resin is approved. Use of any other resin is strictly prohibited.

*Microtunneling and pipe jacking applications

*References are to the current edition of the Standard Specifications for Public Works Construction, the "GREENBOOK", and/ or the "WHITEBOOK" or the latest version of the ASTM Specifications.

Any projects funded by the Clean Water State Revolving Fund (CWSRF) and/or Drinking Water State Revolving Fund (DWSRF) require iron and steel products must be produced in the United States to meet the "American Iron and Steel (AIS)" requirements, unless the Environmental Protection Agency (EPA) waives the AIS requirement.

Revised May 2018

-Page 2-

SUBJECT SPEC. MANUFACTURER SELECTION ADDITIONAL REF (Series/Model No.) REQUIREMENTS

B. Sewer Laterals

I. Vitrified Clay 207-8 Gladdin and McBean D Plain End and Bell and Pipe ASTM C-700 Spigot Type Pipe

Mission Clay D

2. PVC Pipe 207-17 J-M D ASTMD 2751

Certain Teed D

Vinyltech D 3. ABS 207-15 Colby D

(Acrylonitrile- ASTMD 2751 butadiene- Standard Plastics D styrene) Solid Wall Pipe

C. Sewer Fittings

I. Vitrified Clay 207-8 Gladdin and McBean D Plain End and Bell and Fittings ASTMC-700 Spigot Type Pipe

Mission Clay D

2. PVC Fittings 207-17 Vassallo D ASTMD-3034 or Multi-Fittings D ASTMF 679 depending G.P.K. D upon size

J-M D

Plastic Trends Inc: Series G (SDR 35), D Shelby Township,

Series H (SDR 26), D Michigan

Series C pressure sewer D (DR-18 Class C-900 or C-905)

3. ABS Fittings 207-15 U-Brand D

*References are to the current edition of the Standard Specifications for Public Works Construction, the "GREENBOOK", and/or the "WHITEBOOK" or the latest version of the ASTM Specifications.

Any projects funded by the Clean Water State Revolving Fund (CWSRF) and/or Drinking Water State Revolving Fund (DWSRF) require iron and steel products must be produced in the United States to meet the "American Iron and Steel (AIS)" requirements, unless the Environmental Protection Agency (EPA) waives the AIS requirement.

Revised May 2018

-Page 3-

SUBJECT SPEC. MANUFACTURER SELECTION ADDITIONAL REF (Series/Model No.) REQUIREMENTS

D. Sewer Manhole Components 1. Precast ASTM C 478, Mar-Con Products D San Marcos, California

Manhole & 201-10 Precast Base

Oldcastle Precast, Inc D San Diego, CA Plant Riverside, CA Plants

Olson Precast Company D Rialto, California

2. Manhole Pamrex & Pamtight (Pacific D Saint Gobain Cana lizaco, Covers and Pipeline Supply (or Pam ltuana, Brazil Plant Frames Saint Gobain) (All components shal l be

ductile iron .)

National Casting (NC253 I) D Trident Export Corporation 58, N.S. Road Liluah, Howrah 711 204, India Plant

E. Sewer Rehabilitation Products

1. PE Solid Pipe 500-1.3 Chevron Plexco D Reno, Nevada Plant

Chevron Phillips Driscopipe D Watsonville Plant

2. Cured-in-Place 500-1.4 Inliner-Fabric Tube: D Houston, Texas Plant Polyester felt Resin: Dow Derakane 411 Vinyl Ester Memphis, Tennessee Plant

Insituform-Fabric Tube: Polyester felt Resin # I: Shell Epon D 9215 epoxy Resin #2: Interplastics D

VE8319 Vinyl Ester

National Liner D Martinsville, Virginia

Applied Felts Polyester felt D Perris, California AOC Vipel L 704-Net-l I lsophthalic polyester resin or Perris, California AOC Vipel LOIO-PPA Vinyl Ester resin

3. Profiled PVC 500-1.5 Danby D Toronto, Canada Plant 4. Deformed Solid 500-1.7 Hydroconduit D Roaring Springs, Texas

Wall PE Plant

Uliner- Navacor Resin D Houston, Texas Plant

*References are to the current edition of the Standard Specifications for Public Works Construction, the "GREENBOOK", and/ or the "WHITEBOOK" or the latest version of the ASTM Specifications.

Any projects funded by the Clean Water State Revolving Fund (CWSRF) and/ or Drinking Water State Revolving Fund (DWSRF) require iron and steel products must be produced in the United States to meet the "American Iron and Steel (AIS)" requirements, unless the Environmental Protection Agency (EPA) waives the AIS requirement.

Revised May 2018

-Page 4-

SUBJECT SPEC. MANUFACTURER SELECTION ADDITIONAL REF (Series/Model No.) REQUIREMENTS

E. Sewer Rehabilitation Products (cont.)

5. CCFRPM 500-1.8 Hobas Pipe D Birmingham, New York Plant Waco, Texas Plant

6. Folded Solid 500-l.l 0 America Plastic D Wall PVC

AMLiner D

Insituform Nupipe D

7. Machine Spiral 500-1.13 RIB LOC D Gepps Gross, South Wound PVC Australia Plant (November 2001)

8. MultiPlexx 500-2 Product: MultiPlexx Liner D Manufacturing Plant Site: Liner System, System by Terre Hill Terre Hill Composites, TypePVCP Cured-In- Composites Division of Terre Hill

P lace Manhole Concrete Products, Terre Rehabilitation Mu ltiPlexx Liner System: Hill, Pennsylvania

Type/Model PVCP 20-28~88 mils consisting of: Resin: Manufactured by

Resolution Performance PVC Liner: 20 mils PVC Products

Polyester Fleece Backing: I 0 Installers: Tejon oz/yd2 Constructors, Inc.

Fiberglass Backing: 18 oz/yd2

Resin: EPON 9215 at 0.0005 gallons per square foot of manhole area

Epoxy: Application to

substrate surface of manhole to be rehabi litated.

*References are to the current edition of the Standard Specifications for Public Works Construction, the "GREENBOOK", and/ or the "WHITEBOOK" or the latest version of the ASTM Specifications.

Any projects funded by the Clean Water State Revolving Fund (CWSRF) and/ or Drinking Water State Revolving Fund (DWSRF) require iron and steel products must be produced in the United States to meet the "American Iron and Steel (AIS)" requirements, unless the Environmental Protection Agency (EPA) waives the AIS requirement.

Revised May 2018

-Page 5-

SUBJECT SPEC. MANUFACTURER SELECTION ADDITIONAL REF (Series/Model No.) REQUIREMENTS

E. Sewer Rehabilitation Products (cont.)

9. Raven 405 500-2 Product: Raven 405 Epoxy D Raven 405 Epoxy is Epoxy Lini ng Liner Systems by Raven manufactured by Raven System Lining Systems, Inc. Raven Lining Systems, Inc. Plant

405 is a solvent-free 100% is located at I 024 North solids, extra high-build Lansing Avenue, Tulsa, epoxy which can be applied Oklahoma 74106 over 200 mils in a single application. Light blue is the Product shall be applied by standard color when applied. an applicator approved and Theoretical coverage certified by Raven Lining averages 40 ft2 per gallon at Systems. 40-mil thickness.

10. Zebron Epoxy 500-2 Zebron Low Temperature D The Low Temperature 9000/Poly- Epoxy 9000 Primer, and Epoxy 9000 is urethane 386 Polyurethane 386. manufactured by a thi rd Lining System party.

The average coverage of However, Polyurethane 386 Zebron Polyurethane 386 (a is Zebron ' s proprietary 100 percent solids, high- product. Zebron Epoxy bui ld polyurethane) is 12 ft2 9000 and Polyurethane 386 per gallon at thickness of are processed at: 125 mils in one coat. 1141 N Cosby Way

Units H, I & J Epoxy 9000 is a 100 percent Anaheim, CA 92806 solids, moisture tolerant, (800) 824-42 14 capable of spray appl ication of 5 mils thickness in one continuous coat.

11. Utilithane 500-2 Prime Coatings Incorporated D Address of Prime Coatings Epoxy- Inc. is: Polyurethane Uti lithane 1600 Polyurethane P.O. Box 3056

and Utilithane 900 Low Tustin, California PlantA Temperature Epoxy are 92781 proprietary products of Phone (714) 963-9583 Prime Coatings Inc. This Email: product is spray applied utilithane@sbcglobal.net using airless spray Website: equipment. Utilithane 1600 www.util ithane.com is dense polyurethane with no VOCs, and Utilithane 900 Epoxy is a two component product formulated as a "Fast-Set" or "Slow-Set".

*References are to the current edition of the Standa,rd Specifications for Public Works Construction, the "GREENBOOK", and/ or the "WHITEBOOK" or the latest version of the ASTM Specifications.

Any projects funded by the Clean Water State Revolving Fund (CWSRF) and/ or Drinking Water State Revolving Fund (DWSRF) require iron and steel products must be produced in the United States to meet the "American Iron and Steel (AIS)" requirements, unless the Environmental Protection Agency (EPA) waives the AIS requirement.

Revised May 2018

-Page 6-

SUBJECT SPEC. MANUFACTURER SELECTION ADDITIONAL REF (Series/Model No.) REQUIREMENTS

E. Sewer Rehabilitation Products (cont.)

12. Sancon 100 500-2 Sancon 100 Epoxy Primer D Sancon Engineering Inc. Polyurethane and San con 100 5841 Engineer Dr

Polxurethane sprax applied liner manufactured by Huntington Beach, PTM& W Industries at 10640 California Plant 92649 South Painter Ave, Santa Fe Springs, CA 90670 This (714) 891-2323 product is spray applied (800) 726-2664 using airless spray equipment

13 . Saueresin 500-2 Saueresin SewerGard No. D Pittsburg, PA Plant SewerGard No. 21 OX Epoxy Lining System 210X Epoxy Lining System

14. PVC Sheet 500-2 Ameron T-Lock and Arrow- D Brea, CA Plant Lining Systems Lock

15. Tophat Lateral Cosmic Tophat Lateral D Kasten, Austria Plant Connection Connection Sealing System Sealing System *Only ATLAC E-NOV A

RE 3475 Vinyl Ester Resin with ECR fiberglass mat is approved.

F. Miscellaneous

1. Flexible Smith-Blair 44 l Rockwell D Couplings APAC (331 ,323,335),

(CDC-EC)

DFW Plastics, Inc. D

2. Transition ASTMD 1869 Newby Rubber, Inc. D Gaskets

3. High-Deflection Certain Teed D Couplings 4 thru 12 inches diameter

4. Flexible DFW Plastics, Inc. D Saddles (Wyes)

5. Transition ASTMC 1173 Mission Rubber Company, D Mission Rubber Company Coupling with Flex-Seal ARC with 304SS 1660 Leeson Lane Shear Shield shear band Corona, CA 92878-2349

1-800-854-999 I

*References are to the current edition of the Standard Specifications for Public Works Construction, the "GREENBOOK", and/ or the "WHITEBOOK" or the latest version of the ASTM Specifications.

Any projects funded by the Clean Water State Revolving Fund (CWSRF) and/ or Drinking Water State Revolving Fund (DWSRF) require iron and steel products must be produced in the United States to meet the "American Iron and Steel (AIS)" requirements, unless the Environmental Protection Agency (EPA) waives the AIS requirement.

Revised May 2018

-Page 7-

SUBJECT SPEC. MANUFACTURER SELECTION ADDITIONAL REF (Series/Model No.) REQUIREMENTS

F. Miscellaneous (cont.)

6. Repair Fenco Inc D Davison, Michigan Plant Couplings Series 5000 RC (Repair

Coupling) with 316 stainless steel nut and bolt clamps (with 300 stainless steel sheer ring) Series I 000 RC (Repair Coupling) with 301 stain less steel worm gear clamps (with 300 stainless steel sheer ring)

Joints Coupling Inc D El Monte, CA Plant Banded Calder Repair Couplings

7. Casing Spacers, 212-3 BWMCompany D Forest City, NC Plant End Seals, Pipe (SS-8 for carrier pipe up to Penetration 24 inches, SS-12 for carrier Seals pipe greater than 24 inches,

ESW, ESPO, SSPS, CPS)

*References are to the current edition of the Standard Specifications for Public Works Construction, the "GREENBOOK", and/ or the "WHITEBOOK" or the latest version of the ASTM Specifications.

Any projects funded by the Clean Water State Revolving Fund (CWSRF) and/or Drinking Water State Revolving Fund (DWSRF) require iron and steel products must be produced in the United States to meet the "American Iron and Steel (AIS)" requirements, unless the Environmental Protection Agency (EPA) waives the AIS requirement.

Revised May 2018

-Page 8-