APPLICATIONS & SOLUTIONS SERIES · Muffle furnace, up to 1,100°C • Fast heat up and outstanding...

APPLICATIONS & SOLUTIONS SERIES:TRACE ELEMENTAL ANALYSIS

2 www.eu.fishersci.com

Balance, analytical• Weighing modes include weighing, parts

counting and percentage weighing• Large draft shield with sliding top and

side doors• RS 232 interface• Dimensions (w x d x h): 196mm x

320mm x 287mm• Readability: 0.1mg• Linearity: 0.2mg• Reapeatability: 0.1mg• Two year warranty

Cat. No Capacity, g Readability, mg Calibration Pack qty

15305113 210 0.1 External 1

Hotplate stirrer• Hotplate stirrer with coated aluminium

heating plate• Excellent resistance to chemicals• Analogue controls• Max temperature 370ºC• Stirring speed up to 1,500rpm• IP42 protected from liquid spills• Dimensions, mm (w x d x h):

165 x 280 x 115

Cat. No Description Pack qty

15369664 Hotplate stirrer 20L with connection for VTF contact thermometer

1

Essential accessories:


12365097 Thermoregulator, digital programmable from 50°C to 250°C

1

11747303 Support rod for thermoregulator 12365097 1

SAMPLE PREPARATION AND EQUIPMENT

Ovens, universal, with single display

• Precise and homogenous temperature control independent of chamber volume and load

• Temperature range up to +300°C• Augmented functionality with convenient,

approved and tested accessories• Working chamber and housing constructed

almost exclusively from high quality, corrosion resistant and easily cleanable stainless steel

• Three year guarantee for appliances except parts wear and tear

• The temperature values of all universal ovens are measured according to DIN 12880: 2007-05

• Each universal oven is safety tested and carries ‘CE’ symbol

Cat. No Capacity, mL Max. number ofgrids/shelves

Pack qty

12686987 Oven, UN110, 108L volume, 2 grids/shelves

5/2 1

The Memmert ‘U’ universal oven range offers unparalleled precise, even and gentle temperature control for a diverse range of applications such as materials testing, computer chip ageing, complex experiments with highly sensitive loads, drying or tempering electronic components, hardening plastic resin or heating plasticine.

Muffle furnace, up to 1,100°C

• Fast heat up and outstanding energy efficiency

• Small bench top• Digital single setpoint control• CE certified

Cat. No Capacity, L Dims., Int., mm Dims., ext., mm Pack qty

10215522 1.3 100 x 130 x 100 120 x 140 x 120 1

Thermo Scientific™ Thermolyne™ muffle furnaces offer heating solutions for a number of application needs. From general laboratory use to industrial applications, Thermolyne furnaces are ideal for fast heat up and temperature control up to 1100°C.

Baths, Circulators, Refrigerated/Heated

• Stainless steel tanks for durability and ease of cleaning

• Fine tuned refrigeration metering for excellent temperature stability

• Cooling capacities up to 250W• Inlet/outlet connections for external

circulation included• Work area cover included• Bath drains are located on the front of

the unit• Heater, kW: 1.2

Cat. No Capacity, L

Temp., range °C

Stability, °C

Cooling capacity,

Dims.,(w x d x h), mm

Packqty

11366641 5.4 to 6.5 -20 to +100 +0.05 250 203 x 417 x 622

1

The robust refrigeration system ensures that your samples and applications can be cooled quickly.

ThermoFlex™ 900 recirculating chiller

• Temperature range from 5°C to 40°C • 750W cooling capacity (20°C setpoint and

25°C ambient)• Internal pressure relief valve • Custom temperature and pressure alarms • An intuitive user interface for ease of operation • Integrated funnel for easy filling


13426983 ThermoFlex™ 900 recirculating 1

Thermo Scientific ThermoFlex™ recirculating chillers offer a powerful, highly configurable approach to supporting a range of laboratory and process cooling requirements.

• Easily removable condenser grill and air filter allow for quick and simple cleaning to optimise chiller performance and maximise component life

• Air and water filters that can be changed while unit is in operation• Innovative, patented packaging for rapid installation• Quick start guide for seamless start-up in minutes• Advanced design allows two sides of the unit to be blocked, allowing placement in a corner while

maintaining full refrigeration performance• Minimises space requirements, even when compared to chillers with smaller footprints• Temperature stability to ±0.1°C accuracy

3www.eu.fishersci.com

Volumetric flasks, borosilicate glass, Class A certified• ISO 1042, DIN 12664• One mark graduation• Interchangeable polyethylene stopper• Details on each flask include confirmation

of compliance to International Standards as well as an individual reorder code

• Batch certificate available

Cat. No Capacity, mL Pack qty

11506933 25 5

11516933 50 5

11526933 100 5

11546933 250 2

11556933 500 2

11566933 1,000 1

Filtration system, 47mm• All glass filtration system for use with

47mm diameter membranes• Borosilicate glass porosity grade 3

sintered disc to support membrane• Fully autoclavable• Ideal for microbiology and preparation of

HPLC solvents• Complete assembly comprises of four

components - Funnel 300mL capacity - Support base with sintered disc and

vacuum connection with 40/38 socket - 1,000mL conical flask suitable for use

under vacuum with 40/38 cone - Metal retaining clip


15115284 Filtration system, 47mm 1

Accu500 Ultrapure water system• Sample diluent for GC, HPLC, AA, ICP-MS and

other analytical techniques• Feed Water Requirements - Tap water Municipal water, TDS <1000 ppm

(2000 μS/cm) - Feed water pressure 15 - 90 psi (1 - 6 bar)• Product Water Flow Rate - RO water (@ 25°C) 10, 15, 20 and 30 L/hr - Ultrapure water (Type I) (@ 25°C ) 1.5 L/min• Product Water Quality - RO water conductivity* Typically < 20 μS/cm - TOC* < 10 ppb (< 5 ppb with a dual

wavelength UV lamp)


15439699 Accu500 UV Ultrapure water system, 15L 1

- Particles in ultrapure water (> 0.2 μm) < 1/mL (with a 0.2 μm final filter or terminal ultrafiltration cartridge)

- Microorganisms < 0.1 cfu/mL (with a 0.2 μm final filter or terminal ultrafiltration cartridge) - Pyrogens (endotoxins) < 0.001 Eu/mL (with a terminal ultrafiltration cartridge)


Dispensette™ S Trace Analysis Bottle-top dispenser 1-10mL• High-purity materials in contact with the

media• 45 mm standard thread plus the included

adapters fit most common lab bottles• Telescoping filling tube adjusts to different

bottle sizes• Easy disassembly for replacement of the

dispensing cartridge• Accuracy: 0,5% 50µL• Coefficient of variation 0,1% 10µL

Cat. No Valve spring Recirculation valve Pack qty

15408103 PT/IR Without 1

15418103 PT/IR With 1

15428103 Tantalum Without 1

15438103 Tantalum With 1

Dispensette™ S Trace Analysis bottle-top dispenser, DE-M marking, performance certificate, telescoping filling tube, recirculation tube (optional), mounting tool and bottle adapters GL 28/S 28 (ETFE), GL 32 (ETFE) and S 40 (PTFE).

Filter units, syringe,non-sterile• Perfect for daily routine analysis

Cat. No Diameter, mm Pore size, µm Membrane Pack qty

15171499 13 0.45 PTFE 50

15151499 25 0.45 PTFE 50

15101499 25 0.45 PTFE Hydrophobic 50


Easy Reader™ Polypropylene Centrifuge Tubes• Nonpyrogenic, sterile and nonsterile styles• With black graduations and white marking

area• 15mL Tubes are graduated in 0.5mL

subdivisions from 2mL to 14.5mL• 50mL Tubes are graduated in 5mL

increments from 5mL to 50mL


11765075 Centrifuge Tube, PP, 15mL, plug seal, packed in sleeve 500

11829650 Centrifuge tube conical PP non sterile 50ML plug seal cap bulk 25/bags

500

Disposal Can Spill Basin

• Capture inadvertent leakage. The Disposal Can Spill Basin holds containers up to 30.5cm diameter.

• Recommended for holding up to 18.9L • Dimensions, (w x d x h) mm: 14.875 x

14.875 x 7.625


11909385 Can Spill Basin PE 1

Cat. No Tubes, mL Wells Dims., l x w x h, mm Pack qty

15340390 10 to 18 40 100 x 252 x 83 1

15310400 15 to 50 24 110 x 282 x 85 1

Test tube racks• Made from DelrinTM fibreglass-reinforced

polyoxymethylene (POM)• Tough and more highly resistant to acids,

bases, solvents and heat• Offers the highest chemical and heat

resistance (-40°C to +140°C)• Available in half and full rack sizes for five

different tube diameters• Moulded in a single, continuous piece so

no assembly required• Autoclavable• White

Wash bottles, LDPE, with blank write-on panel• Wide neck• Blank write-on label• Indelibly printed in English, French and

German


12510066 Wash bottle, 250mL 5

12520066 Wash bottle, 500mL 5

12530066 Wash bottle, 1,000mL 5


Pipettor tips, standard, universal fit, SureOne™• Non-sterile products - certified to be free

of RNase/DNase and DNA• Sterile products - e-beam sterile products

are certified to be free of RNase/DNase, pyrogen, bioburden, PCR* inhibitors and endotoxins

Cat. No Description Volume, µL Pack qty

11933426 Beveled end tips 1 to 200 1,000

10778535 Micropoint tip 100 to 1,250 1,000

• Fisherbrand™ SureOne™ pipettor tips are a comprehensive line of universal fit pipettor tips, available in a range of volumes, from 5μL to 10mL, in bulk, racked, sterile racked and the environmentally friendly reload system

• Compatible with most popular brands of pipettor, SureOne™ achieves optimal fit with Fisherbrand™ Elite™ pipettors

Pipettors, single channel,variable volume, Elite• Soft-touch tip ejector• Optimal fit to SureOneTM pipettor tips• Fully autoclavable• Comfortable, lightweight handle with

finger rest• Extremely low plunger forces

Cat. No Description Volume, µL Pack qty

11865762 Elite Pipettor, single channel 10 to 100 1

11885762 Elite Pipettor, single channel 100 to 1,000 1

11805772 Elite Pipettor, single channel 1,000 to 10,000 1

15268638Four popular pipettor sizes (2, 20, 200, 1000µL) plus stand

— 1


Fisher Chemical High-Purity Acids for Trace Elemental Analysis

• Optima™ acids - Suitable for detection to ppq levels. Feature the lowest metal content (1ppt for key metals) and the highest purity• Trace Metal™ acids - High purity, exceptional value. Specification measured at 0,1ppb for key metals• Primar Plus™ acids- The perfect choice for routine applications• For Analysis AR, acids (low cadmium, lead and mercury level) - suitable for use in environmental and food applications

Description Type Detection level Cat. No

250mL 50mL 1L 2.5L

Acetic acid glacial Optima™ ppt to as low as ppqA465-250 A465-500 A465-1

11994891 11944131 11984891

Acetic acid glacial Trace Metal™ 1 ppbA507-P500 A507-P1 A507-P212

11375890 11395890 11315900

Acetic acid glacial Primar Plus™ 1 - 10 ppbA/0411/PB08 A/0411/PB15 A/0411/PB17

10120273 10334193 10120273

Ammonia solution Optima™ ppt to as low as ppqA470-250 A470-500 A470-1

11944131 11954131 11934131

Ammonia solution Trace Metal™ 1 ppbA512-P500

11335900

Hydrobromic acid Optima™ ppt to as low as ppqA471-500

11974101

Hydrochloric acid Optima™ ppt to as low as ppqA466-250 A466-500 A466-1

11974081 11984081 11954081

Hydrochloric acid Trace Metal™ 1 ppbA508-P500 A508-P1 A508-P212

11365830 11325870 11355890

Hydrochloric acid Primar Plus™ 1 - 10 ppbH/1196/PB08

10199832

Hydrochloric acid 25% For Analysis AR low cadmium, lead and mercury levelH/1020/PB15 H/1020/PB17

12605167 12307223

Hydrochloric acid 37% For Analysis AR low cadmium, lead and mercury levelH/1180/PB15 H/1180/PB17

12625167 12635167

Hydrogen Peroxide Optima™ ppt to as low as ppqP170-500

11692809

Nitric acid Optima™ ppt to as low as ppqA467-250 A467-500 A467-1

11974091 11984091 11964091

Nitric acid Trace Metal™ 1 ppbA509-P500 A509-P1 A509-P212

11395780 11395790 11395800

Nitric acid Primar Plus™ 1 - 10 ppbN/2272/PB08 N/2272/PB15 N/2272/PB17

10456463 10149982 10098862

Nitric acid For Analysis AR low cadmium, lead and mercury levelN/2320/PB15 N/2320/PB17

12695167 12605177

Perchloric acid Trace Metal™ 1 ppbP/1292/PB08 P/1292/PB15

10755563 10343513

Sulfuric acid Optima™ ppt to as low as ppqA468-250 A468-500 A468-1

11934091 11944091 11924091

Sulfuric acid Trace Metal™ 1 ppbA510-P500 A510-P1 A510-P212

11395820 11315830 11345830

Sulfuric acid Primar Plus™ 1 - 10 ppbS/9231/PB08 S/9231/PB15 S/9231/PB17

10620714 10466463 10707263

Sulfuric acid For Analysis AR low cadmium, lead and mercury levelS/9220/PB15 S/9220/PB17

12615177 12625177

Water Optima™ ppt to as low as ppqW9-500 W9-1 W9-2 *

11934391 11924391 12038598

* Pack size of 2L

Detect to ppq levels

CHEMICALS


Efficient, accurate, and cost-effective

Atomic Absorption (AA) Spectrometry

Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES)

To learn more contact your local account managers or visit thermofisher.com/TraceElemental

Powerful, easy-to-use, solution for multi-element analysis

ANALYTICAL SYSTEMS

High performance at great value and low cost of ownership. Perform efficient, accurate trace elemental analysis with the high-performance double beam, graphite furnace and dual-atomizer double beam Thermo Scientific™ iCE™ 3000 Series AA Spectrometers.

The iCAP 7000 Plus Series ICP-OES provides low cost multi-element analysis for measuring trace elements in a diverse sample range. The innovative ICP-OES technology is driven by the Thermo Scientific™ Qtegra™ Intelligent Scientific Data Solution™ (ISDS) software and the Element Finder plug-in. The plug-in reduces method development time and removes the need for wavelength selection by the user.


Laboratory coats, unisex

Gloves, nitrile, disposable,purple, PPE Category III

Gloves, nitrile, disposable,purple, PPE Category III

• Washable at 85°C• Manufactured to high quality standards,

the Fisherbrand unisex laboratory coat is exclusively available from Fisher Scientific

• Manufactured using a quality pre-shrunk polycotton fabric, it is suitable for industrial laundering at temperatures up to 85°C

• Features include, two lower patch pockets, breast pocket with integral pen pocket,concealed stud fastened front, single rear vent for ease of movement. Non-PPE product

• Ergonomically designed and 100% nitrile. Latex and protein free with non-detectable residual accelerators

• Textured fingertips• Powder free

• Combines protection, comfort and sustainability for all-round care of the science and the environment

• Tested against over 40 chemicals and 10 cytotoxic drugs. Strength, quality and cleanliness tracked by certificate of analysis. PPE Category III compliant, AQL 0.65, EN374-1 and -2, ISO 16604, food contact approved

• Available in two lengths: 240mm or 250mm

Cat. No Size Pack qty

11558102 S 1

11568102 M 1

11578102 L 1

11588102 XL 1

11598102 2XL 1

11508112 3XL 1

Cat. No Size Length, mm Pack qty

11502723 2XS 250 100

11512723 XS 250 100

11522723 S 250 100

10223882 M 250 100

11542723 L 250 100

11552723 XL 250 100

Cat. No Size Length, mm Pack qty

10634525 XS 240 150

10765495 S 240 150

10735685 M 240 150

10682415 L 250 150

10754175 XL 250 140

Spectacles, safety, Bandido

Spectacles, safety, Contour BS EN 166, EN 170, EN 172

Over-Spectacles, Visiteur

• Light weight, wrap around safety spectacles with polycarbonate clear anti mist and anti scratch coatings

• Clear polycarbonate lens with anti-fog and anti-scratch coating

• The polycarbonate VISITEUR Over-Spectacles are designed for wearers of prescription glasses and occasional wearers (site visitors)

Cat. No Size Pack qty

11895834 Safety spectacles, Bandido 1

Cat. No Lens colour Pack qty

11775677 Clear 1

Cat. No Lens colour Pack qty

10565234 Clear 1

Spectacles, SecureFit™ 400 series• 3M™ SecureFit™ 400 series eyewear

includes 3M™ Patented• Diffusion Temple Technology, a scientific

advancement that helps diffuse pressure over the ear, enhancing frame comfort while not compromising the security of fit

• With the addition of soft, self adjustable nose pads and dual-injected padded temple touch points, 3M™ SecureFit™ 400 series eyewear allows for even greater personalisation of fit and reduces the need for multiple eyewear requirements


15371994 SecureFit™ spectacles 400 series clear 1

• Motion-inspired, contoured piping in a bold, modern colour palette infuses even more style to the 3M™ SecureFit™ 400 series

• Made of polycarbonate lenses that absorb 99.9% of UVA and UVB,• 3M™ SecureFit™ 400 series eyewear meets the requirements of EN 166:2001 and are so

lightweight you will forget that you have them on

SAFETY

EN_2016_11689

How To Contact Us

United KingdomTel: +44 1509 231 166Fax: +44 1509 231 893Email: [email protected]

IrelandTel: +353 01 885 5854Fax: +353 01 899 1855Email: [email protected]

Please note your account number here:

APPLICATIONS & SOLUTIONS SERIES · Muffle furnace, up to 1,100°C • Fast heat up and outstanding...

Documents

Transcript of APPLICATIONS & SOLUTIONS SERIES · Muffle furnace, up to 1,100°C • Fast heat up and outstanding...