Apex cnc catalogue

Email: [email protected] skype: apex-cnc

www.apex-cnctech.com - 1 -

APEX CNC TECHNOLOGYCO., LTD.

About us~~:

APEX CNC Technology Co., Ltd is a professional manufacturer specializing in exporting CNC router, CNCplasma cutting machine, laser cutting machine, cuttting plotter. APEX CNC products are widely used in manyindustries, such as the woodworking 2D/3D industry, advertising industry, stone engraving and sign marking,furniture processing, decoration electronic fixtures, industry and other gifts industry. They can engrave and cutwood, acrylic, stone, leather, glass, plastic sheet, metal sheet and other materials.

APEX CNC Technology Co., Ltd has set up in major cities across domestic market more than 20 agents andwe provide customers Online Negotiating, Order Confirmation, Delivery Date, Installation and AdjustingGuidance, Daily Maintenance and After-sale Service. Our products is not only throughout the country, but alsoexported to Europe, the United States, the Middle East, Southeast Asia, Africa and other regions.

Pursuing the faith of “Innovation and Development”, APEX CNC Technology Co., Ltd keeps the leadingposition among the CNC woodworking equipment industry due to the high reliability and top quality of ourProducts.



Application:●Wooden plate processing: wood carving, cutting, hollowing-out and hole-drilling on the three-dimensional wave board processing,

wooden doors, window processing, cabinets doors and panels, computer table and Plate furniture auxiliary processing.

●Advertising industry processing: Acrylic cutting, Advertising signs, logo production, forming system module, a variety of the production of

advertising decorative products.

●Mold material industry: the wooden, copper, aluminum and other metal molds, as well as artificial marble, sand, plastic sheeting, non-metallic mold.

X,Y,Z working area 1300*2500*200mm(1500*3000*200mm, 2000*3000*200mm)

Drive and motor Yako stepper motor/driver; yaskawa servo motor/driver

Spindle 3kw/4.5kw/6kw watercooling spindle; 3kw/4.5kw/6kw HSD aircooling spindle

Inverter Delta frequency inverter

Control system NCstudio/ Mach3/DSP controller

XYZ Travelling Positioning Accuracy ±0.05/300mm

X, Y, Z Travelling Repositioning Accuracy ±0.05mm

Frame Big thickened Steel Square Tubes, thickness 8mm

X,Y structure Rack and pinion, Hiwin square rails on X, Y axis

Z structure Taiwan TBI Ballscrew, Hiwin square rails on Z axis

Max Rapid Travel Rate 30,000mm/min

Max working speed 18,000mm/min

Working voltage AC220V/380V, single/three phase

Command languages G code

Running Environment Temperature 0 degree - 45 degree

Software Type3 English version; Artcam English version

Net weight 1550KGS; 1750KGS; 2100KGS

Gross weight: 1750KGS; 1950KGS; 2300KGS



Application:●Advertising industry processing: Acrylic cutting, Advertising signs, logo production, forming system module, a variety of the production of

advertising decorative products.

●Other: Three-dimensional curved surface of instruments like violin, erhu, dance and etc, Also suitable for engraving and cutting on iron plate

and the other metal material.

X,Y,Z working area 1200*1200*100mm

Drive and motor Yako stepper motor/driver

Spindle 1.5kw / 2.2kw watercooling spindle





X, Y, Z structure Taiwan TBI Ballscrew, Hiwin square rails on X, Y, Z axis



Working voltage AC220V, single phase




Net weight 500KGS

Gross weight 700KGS

Relative Humidity 30% - 75%

Guarantee One year from the date of commission



Application:●Wood-working Industry: Kitchen Doors, Musical Instrument, Windows, etc;●Furniture Industry: Cabinet, Office Furniture, Panel Furniture, Wood

Door, etc;●Suitable Material: Solid Wood, Panel, Acrylic, Plexiglass, Wood, MDF, Plastic, Copper, Aluminum, etc.


Drive and motor Stepper/servo model

Spindle 2.2kw/3kw/4.5kw watercooling spindle





Z structure Taiwan TBI Ballscrew, Hiwin square rails on X, Y, Z axis

X, Y axis structure Rack and pinion, Hiwin square rails on X, Y axis







Net weight 1700KGS

Gross weight 1900KGS


Optional Accessories Rotary system, Mist-cooling system,Dust collector/ Dust hoods for three axis



Application:●Wood-working Industry: Kitchen Doors, Musical Instrument, Windows, etc;●Furniture Industry: Cabinet, Office Furniture, Panel Furniture, Wood

Door, etc;●Suitable Material: Solid Wood, Panel, Acrylic, Plexiglass, Wood, MDF, Plastic, Copper, Aluminum, etc.


Drive and motor Stepper/servo model

Spindle 2.2kw watercooling spindle

Inverter Fuling frequency inverter




Z axis structure Taiwan TBI Ballscrew, Hiwin square rails on Z axis








Net weight 1700KGS







Application:● Furniture: ideally suitable for processing cabinet door, solid wood furniture, panel wood furniture, windows, tables/chairs etc.

● Other wooden products: stereo box, computer desk, musical instruments, etc.

●Well-suited for processing panel, insulating materials, plastic, epoxy resin, carbon mixed compound, etc.


Drive and motor Servo model

Spindle 9kw HSD aircooling spindle with carousel auto tool changer（LATC/CATC）


Control system Syntec controller











Net weight 2100KGS






Application:●Instrument Industry: Shaping large instrument and Engraving on the three-dimensional surface.

●Mould Industry: suitable to engrave and Cut all kinds of mold and large nonmetal mould. Such as, auto Foam Mold, Aviation,Wood Mold, large

Ship Mold, Train Wood Mold etc.



Spindle 7.5kw watercooling spindle, 0-24000rpm


Control system Taiwan Syntec control system

Table structure T- slot with Milling steel table

Gantry steel



Max travelling speed 36,000mm/min

MAX working speed 8,000mm/min










Application:●This Apex CNC Router with 4axis is very suitable for making deep foam, plastic, stone,wood mould works, MDF, Acrylic, and some soft metal; also

can be widely used for flat materials, such as flat stone, wood, aluminium, copper, PVC and other hard and soft materials.

X,Y,Z working area 1300*2500*(400mm~ 1000mm)*+- 90°


Spindle 9kw HSD aircooling spindle


Control system Taiwan Syntec control system

X, Y, Z Travelling Positioning Accuracy ±0.05/300mm










Frame Welded Steel gantry structure





Application:●can be widely used for advertisement processing, engraving on wood processing and cylinder workpieces, such as cylindrical arts & crafts, PCB material

cutting, marble/ stone cutting, indoor decoration cutting, sign and mark manufacturing cutting, acrylic board processing.


Drive and motor stepper motor/driver;

Spindle 2.2kw or 3kw watercooling spindle, 0-24000rpm


Control system DSP control system









Table structure T- slot/ Aluminium

Gross weight 650KGS





Application:●can be widely used for advertisement processing, engraving on wood processing and cylinder workpieces, such as cylindrical arts & crafts, PCB material

cutting, marble/ stone cutting, indoor decoration cutting, sign and mark manufacturing cutting, acrylic board processing.



Spindle 4.5kw aircooling spindle, 0-18000rpm











Table structure T- slot/ Aluminium






Application:● Wood carving/ cutting, bamboo, window processing, cabinets doors and panels, computer table and Plate furniture auxiliary processing, jade, marble,

organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.

● Advertising industry processing: Acrylic cutting, Advertising signs, logo production, forming system module, arts and crafts, shoes, toys, garments,

a variety of the production of advertising decorative products.

● Mold material industry: the wooden, as well as artificial marble, sand, plastic sheeting, PVC pipe, and other non-metallic mold.

X,Y,Z working area 1300*2500mm(1600*2600mm, 2000*3000*200mm)

Driving system Stepper motor or servo model

Laser power RECI Laser 60w, 80w, 100w, 130w

Laser type Sealed co2 laser tube

Working platform T- Blade worktable(honeycomb table for option)

Watercooling form Water-cooling chiller with air compressor

Interface USB

Cutting speed 0 -5000mm/min

Working power AC110v - 220v, 50hz -60hz

Graphic format supported *.plt,*.dst,*.dxf,*.bmp,*.dwg,*.al,*las

Recommended Spare Parts Laser Tube and Lens


Software supported TCorelDraw, Photoshop, AutoCAD


Optional Accessories ① Rotary system

② Laser Tube and Lens

③ Motorized up and down table



Application:●Apex plasma cutting machine adopts the heavy steel structure, with the feature of high temperature tempering after welding to eliminate the stress

treatment, distortion free, which has the good rigidity, more stability, higher precision, strong and long life, small moving inertia.

●High cutting speed, high precision and low cost. Parts cutting, plate cutting machining and welding shaped processing industries.

●This high precision plasma cutting machine applies to iron plate, aluminum plate, galvanized sheet, White Steel plate, Titanium plates, and so on like the

sheet metal.

X,Y,Z working area 1300*2500mm


Working material Iron, steel, aluminum, sheets, galvanized sheets, titanium plates

Inverter Fuling frequency inverter

Control system Start torch height control system

Table structure Heavy steel frame

Cutting thickness 0.5-40mm

Document transfer U disk

Working form Untouched Arc Striking

Software Startcam software

MAX working speed 8,000 mm/min

Working voltage AC220v/240v/380v, 3 phase

Gross weight 1200 KGS

Plasma source Freecut/ Hwayuan /USA powermax 40A, 63A, 100A, 120A, 160A, 200A, 300A





Application:●This machine is widely used in stone industry, such as natural marble, granite, artificial stone, tombstones, milepost, ceramic tile, glass and other materials.

●Metal mold industry, such as copper engraving cutting.

X,Y,Z working area 1300*2500*300mm(1500*3000*300mm, 2000*3000*300mm)


Spindle 3kw/4.5kw/6kw watercooling spindle



X, Y, Z Travelling Positioning Accuracy ±0.05/300mm










Frame Big thickened Steel Square Tubes

Net weight 1550KGS; 1750KGS; 2100KGS

Gross weight 1750KGS; 1950KGS; 2300KGS





Application:Staircase column, staircase general column (beginning column), chair legs, wooden coat rack (with automatic start function), solid wood hangers, all kinds

of wood hyacinth, a baseball bat (all stick type), wooden vases, Roman column and washbasin European furniture, wooden cylindrical, conical, curved,

spherical and other complex shapes or wooden rotator semi-finished wood products.

X,Y,Z working area 1500*300mm


Max working diameter 20mm - 300mm

Max working lengh 100mm – 1500mm

Max spindle speed 700 – 2800 rpm

Air pressure 0.6- 0.8 Mpa

Motor power 5.5kw

Layout form Horizontal


Command language G code

Working voltage AC220V/380V, 3 phase

Overall size 2600*1100*1200mm


Net weight 1100KGS






Model 720 860 1160 1360 1660

Max paper width 720mm 860mm 1160mm 1360mm 1660mm

Max cutting width 620mm 760mm 1060mm 1260mm 1560mm

Cutting speed 50-800mm/s

Cutting force 50-500g

Buffer capacity 1M

LCD Yes

Strip of plotter Plastic sheet

Driver Stepping

Maximum media thickness 0.25mm(10mlls)

Maximum cutting speed 40cm/s((17ips) in all directions

Maximum acceleration 4m/s²

Maximum character matrix Approx 5mm(0.2") high

Blade type Super steel (1.2mm)

Pen type Water-base fibertip

Film type Self-adhesive vinyl film, fluorescent film, reflective film, paper

Display panel 8 digits*2 line LCD

Offset 0-1mm

Interfaces Parallel serial, USB

Power requirements AC220V±10% or AC110V±10%

Power consumption 60W max

Repeatability 0.127mm

Mechanical resolution 0.0254mm/step

Commands set DMPL

Environmental temperature 0-35°C

Apex cnc catalogue

Technology

Transcript of Apex cnc catalogue