“Facilitating further Minerals Beneficiation in South Africa · • The vast majority of...
Transcript of “Facilitating further Minerals Beneficiation in South Africa · • The vast majority of...
1
1
“Facilitating further Minerals Beneficiation in South Africa ”
Presentation to GIBS Forum
By Roger Baxter, Senior Executive, Chamber of Mines of South Africa,
22 May 2013
2
PRESENTATION OUTLINE
Side-stream beneficiation
How is South Africa doing in terms of manufacturing beneficiation?
General principles of beneficiation
Key drivers of manufacturing beneficiation?
Conclusion & policy implications
Broad business support on the concept of growing beneficiation
Working collectively and strategically to facilitate beneficiation?
DMR beneficiation strategy – strategic framework to facilitate beneficiation
2
3
� The mining sector and business in general is of the view that adding value to South Africa’s minerals is a meritorious objective.
� Of course the key questions include:
– How much beneficiation is already taking place?
– How to define beneficiation?
– Who are the lead agents to drive beneficiation?
– How to encourage/facilitate beneficiation?
– How to coordinate the efforts and actions of stakeholders to create this enabling framework?
THERE IS BROAD SUPPORT FROM BUSINESS ON THE OBJECTIVE OF ADDING VALUE (BENEFICIATION) TO SOUTH AFRICA’S MINERALS
4
THE AMOUNT OF DOWNSTREAM BENEFICIATION ALREADY TAKING PLACE IN SOUTH AFRICA IS SIGNIFICANTLY UNDERESTIMATED
� Where the commercial opportunities exist, significant downstream beneficiation is already taking place.
� The Chamber conservatively estimates that about another R300 billion of value & >150 000 jobs are created by downstream beneficiation:
– E.g. In 2012 43 tons of pgms converted into catalytic converters in RSA (13% of global production) creating 5000 jobs & >R20 billion in value.
– 125 MT of coal converted into >200 000 gWh of electricity that fired South Africa’s economy.
– 45 MT coal valued at R11 billion converted into liquid fuels, plastics, polymers, waxes, fertilisers, etc., valued at R165 billion & creating >30 000 jobs.
– 8.4 MT iron ore converted into 5 MT of steel creating sales of >R29 billion and about10 000 jobs.
– 14 MT of cement produced creating R20 billion in sales and many jobs.
3
5
PRESENTATION OUTLINE
Side-stream beneficiation
How is South Africa doing in terms of manufacturing beneficiation?
General principles of beneficiation
Key drivers of manufacturing beneficiation?
Conclusion & policy implications
Broad business support on the concept of growing beneficiation
Working collectively and strategically to facilitate beneficiation?
DMR beneficiation strategy – strategic framework to facilitate beneficiation
6
DMR BENEFICIATION STRATEGY – STRATEGIC FRAMEWORK TO PROMOTE AND FACILITATE BENEFICIATION
� The government has adopted the Beneficiation Strategydeveloped by the DMR. The new IPAP5 also talks to beneficiation.
� Given the cross-cutting nature of the issues that are necessary to promote beneficiation – an integrated strategic approach to the matter is critically important.
� Not only do all the stakeholders need to work together (labour, business and government), but multiple government departments and agencies also need to play a constructive role (i.e. critical need for cross-coordination between government departments).
� The Beneficiation Strategy needs to work with the NDP, NGP, IPAP5 and IRP2010.
4
7
DTI IPAP5: PROPOSALS
� The new IPAP5 also talks to beneficiation.
� Proposes:
� Investigation of 5 key value chains (including side-stream).
� Modifications to MPRDA to ensure local availability of supply, the investigation of the issue of strategic minerals, critical feed-stocks and domestic pricing conditions.
� All possible levers to be considered.
DMR IS THE LEAD DEPARTMENT AND IS WORKING ON THE BENEFICIATION IMPLEMENTATION PLAN (NOT YET READY), WHICH LINKS
BACK TO THE BENEFICIATION STRATEGY
8
DMR BENEFICIATION STRATEGY – STRATEGIC FRAMEWORK TO PROMOTE AND FACILITATE BENEFICIATION
Broad support for:
� Coordinated strategic approach to facilitating beneficiation.
� Need for identification of cross-cutting constraints to beneficiation (and development of appropriate solutions).
� Building on the work of existing beneficiation structures and previous research work done on the issue.
� Investigating SWOTs of top 5 mineral beneficiation chains.
� An appropriate consultative process to ensure stakeholder buy-in and workable proposals emerge from the process.
5
9
PRESENTATION OUTLINE
Side-stream beneficiation
How is South Africa doing in terms of manufacturing beneficiation?
General principles of beneficiation
Key drivers of manufacturing beneficiation?
Conclusion & policy implications
Broad business support on the concept of growing beneficiation
Working collectively and strategically to facilitate beneficiation?
DMR beneficiation strategy – strategic framework to facilitate beneficiation
10
“The term beneficiation, used broadly to describe the successive
processes of adding value to raw materials from their extraction through to the sale of finished products to consumers, covers a wide range of
very different activities. These include large-scale and capital-intensive operations like smelting and technologically sophisticated refining as
well as labour-intensive activities such as craft jewellery”.
Minerals Policy White Paper, Oct 1998
A WORKABLE DEFINITION FOR DOWNSTREAM MINERALS BENEFICIATION
6
11
THE FOUR STAGE DOWNSTREAM BENEFICIATION PROCESS
StageMineral beneficiation
process categoryProcess flow-chart Labour
intensity
Capital
intensity
1
2
3
4
The action of mining and
producing an ore or
concentrate (primary
product)
The action of converting a
concentrate into a bulk
tonnage intermediate
product (such as a metal
or alloy)
The action of converting the
intermediate goods into a
refined product suitable for
purchase by both small &
sophisticated industries (semis)
The action of
manufacturing a final
product for sale
Run-of-mine
ores
Washed &
sized
concentrates
Mattes/slags/
bulk
chemicals
Ferro alloys/
pure metals
Steel/ alloys
Worked
shapes &
forms
Worked
shapes &
forms
Worked
shapes &
forms
High High
Low High
Low High
Medium to
high
Medium to
high
Industry
Cluster
Mining
Mining
Refining /
Manufacturing
Manufacturing
Mining
Manufacturing
12
MINING BENEFICIATION
Mining has competency/skill in the mining and in certain parts of the concentrating/smelting areas.
MANUFACTURING BENEFICIATIONFrom refining to the fabrication of a final consumer product.
Manufacturing companies have core skills and competency in this arena (understanding customer needs, product
development, design, skills, markets, distribution chains, technology).
DEFINING DOWNSTREAM BENEFICIATION
7
13
PRESENTATION OUTLINE
Side-stream beneficiation
How is South Africa doing in terms of manufacturing beneficiation?
General principles of beneficiation
Key drivers of manufacturing beneficiation?
Conclusion & policy implications
Broad business support on the concept of growing beneficiation
Working collectively and strategically to facilitate beneficiation?
DMR beneficiation strategy – strategic framework to facilitate beneficiation
14
SIDE-STREAM BENEFICIATION
�Much of the focus has been on defining downstream beneficiation (adding further value to the primary minerals generated by mining).
� Little attention has been given to the significant side-stream beneficiation sectors that exist because of mining. Mining creates the “critical-mass” necessary for the establishment of other industries, such as stock markets, financial services, contracting services, heavy engineering, power, transport, manufacturing, etc.
� The multiplier effects of mining are so large as to generate an estimated doubling of the direct contribution of the sector to the economy.
� In countries such as Canada and Australia the side-stream beneficiation industries have been given due recognition and have been supported by their governments.
�Side-stream beneficiation requires more recognition in South Africa.
8
15
THE CONTRIBUTION OF MINING IS SIGNIFICANT, WITH SIDE-
STREAM BENEFICIATION PLAYING AN IMPORTANT ROLE
• Creates 1.3 million jobs (500 000 direct & 800 000 indirect).
• Accounts for about 19% of GDP (9% direct, 10% indirect & induced).
• Critical earner of foreign exchange >50%.
• Accounts for 20% of investment (12% direct).
• Attracts significant foreign savings (R1.4 trillion/ 29% of value of JSE).
• 17.7% of corporate tax receipts, 2011 R26bn & R5.5 billion in royalties.
• R437 billion in expenditures, +/- R389 billion spent locally.
• R89 billion spent in wages and salaries
• 50% of volume of Transnet’s rail and ports
• 94% of electricity generation via coal power plants
• 15% of electricity demand
• About 37% of country’s of liquid fuels via coal
• R4 billion spent on skills development
• R1.4 billion spent on community investment
16
THE LINKAGES OF MINING TO THE ECONOMY
Mining’s direct contribution:
•GDP R230 Billion or 9% of GDP
•Jobs 499 217
The Induced Impact:
•GDP R136,1 billion or 6% of GDP
•Jobs 496,319
First round impact:
•GDP R59 billion or 2.3% of GDP
•Jobs 207 949
Indirect impact
•GDP R42.7 billion or 1.7% of GDP
•Jobs 149,898
The Total Contribution of Mining to the Economy
•GDP R468 billion or 18.7% of GDP
•Jobs 1,353,383 (16.6% of total employment)Source: Quantec & IDC, 2010 data
9
17
Minerals & Metals in South Africa: A Significant Value Added Cluster
ScienceTechnology
Exploration
Geoscience
Suppliers
Mining is one of the most extensive and best developed South African industrial clusters
Extensive sciences & technology network/research
Broad expertise in geoscience
Large exploration expertise
Large number suppliers of equipment and services
World class educational and skills development systems and institutions
Sophisticated financial institutions (JSE, banks, legal)
Large scale smelting and refining.
Mining
SmeltersRefineries
GovernancePolicy
EquityFinancing
(JSE)
Professional
schools
18
PRESENTATION OUTLINE
Side-stream beneficiation
How is South Africa doing in terms of manufacturing beneficiation?
General principles of beneficiation
Key drivers of manufacturing beneficiation?
Conclusion & policy implications
Broad business support on the concept of growing beneficiation
Working collectively and strategically to facilitate beneficiation?
DMR beneficiation strategy – strategic framework to facilitate beneficiation
10
19
� This is a crucially important issue because much of the focus in the beneficiation debate in the past has been on why the mining sectorhas not done enough to drive the manufacturing/fabrication beneficiation area - despite acceptance by stakeholders that the beneficiation being focused on is at the manufacturing level.
� Given the globally accepted and driven model of specialisation, it is very unusual to see a mining company operating at all levels of the value chain.
THE SEPARATION OF MANUFACTURING BENEFICIATION FROM MINING BENEFICIATION IS VERY IMPORTANT
20
• For precious metals and diamonds the products are generally available in any of the world’s markets at internationally determined prices.
• The vast majority of manufacturing beneficiation (jewellery fabrication & diamond cutting) takes place in countries that have little or no mine production of precious metals and diamonds.
• So the answer is that the availability of mined precious metals and diamonds at world determined prices does not necessarily provide a competitive advantage.
• For bulk mined commodities prices are generally determined at the international level, but most manufacturing processing takes place near the market for the product (such as steel).
• The challenges for bulk commodity beneficiation is the pricing of intermediate products (steel) which challenges final fabrication (e.g. steel wire, gas bottles, etc), rather than actual mined commodity prices (iron ore).
DOES THE AVAILABILITY OF MINERALS CONSTITUTE AN ADVANTAGE FOR THE MANUFACTURING BENEFICIATION SECTORS?
11
21
THE COUNTRIES THAT MINE THE DIAMONDS ARE NOT NECESSARILY THE COUNTRIES THAT CUT DIAMONDS
22
THE COUNTRIES THAT MINE THE GOLD ARE NOT NECESSARILY THE COUNTRIES THAT FABRICATE GOLD PRODUCTS
0
5
10
15
20
25
30
% o
f w
orld
Gold, share of world mine production by volume versus share of jewellery fabrication by volume 2012
Share of mine production volume Share of gold fabrication demand
12
23
THE COUNTRIES THAT MINE PGMS ARE NOT NECESSARILY THE COUNTRIES THAT FABRICATE PGM ARTICLES (JEWELLERY/CATS, ETC)
MIDP driven
24
COMPARATIVE ADVANTAGE issues such as natural resources are no longer considered to be a key driver of
manufacturing beneficiation investment.
MANUFACTURING BENEFICIATION IS DRIVEN BY COMPETITIVE ADVANTAGE ISSUES & NOT NECESSARILY BY THE AVAILABILITY OF RAW MATERIALS
COMPETITIVE ADVANTAGE issues such as cost competitive production, skills and craftsmanship, etc., are now the key drivers of manufacturing beneficiation
investment.
13
25
COMPARATIVE ADVANTAGE VERSUS COMPETITIVE ADVANTAGE
Type of advantage Source Beneficiary Description and policy implication
Comparative
advantage as
traditionally
defined
Endowed
All firms in
industries,
regions
Cheap resources, low cost labour. Endowed
advantages remain critically important to South
Africa’s primary industries. Microeconomic
reforms that improve the country’s ports,
transport and electricity will support the country’s
comparative advantages in these areas.
Dynamic
comparative
advantage
Created
All firms in
industries,
regions
World class human and physical infrastructure, as
well as clusters that develop capacities useful to
all firms. Here South Africa is weak and policy
objectives should be on the enhancing of physical
infrastructure, a better educated and skilled
workforce, market reforms, support for R&D, etc.
Competitive
advantage
Created
Individual firms
The fostering and nurturing of world class firms.
Policy issues here include competition law
responses to the need for scale in global markets,
tax regimes relative to competitors, domestic non-
tariff barriers, government procurement, overseas
market development support, export facilitation,
etc.
Primary industries
Competitive Manufacturing
26
• Significant entrepreneurial base looking at opportunities to service markets.
• Competitive production, high productivity, low costs vs competitors.
• Craftsmanship and specific skills.
• Access to markets (domestic and foreign). Most successful jewellery producers have started with a large domestic market.
• Good market intelligence (what customers want, the latest designs?)
• Low costs of doing business (smart tape - not red tape).
• Low materials funding costs (i.e. low interest rates).
• Special economic zones (duty free, VAT free and low tax rate areas for manufacturing).
• Quality assurance (Hallmarking) for final markets.
• Research & development & innovation incentives and capabilities.
• Appropriate and competitively priced infrastructure.
WHAT ARE THE KEY DRIVERS OF THE MANUFACTURING BENEFICIATION INDUSTRY (E.G. JEWELLERY FABRICATION)?
14
27
PRESENTATION OUTLINE
Side-stream beneficiation
How is South Africa doing in terms of manufacturing beneficiation?
General principles of beneficiation
Key drivers of manufacturing beneficiation?
Conclusion & policy implications
Broad business support on the concept of growing beneficiation
Working collectively and strategically to facilitate beneficiation?
DMR beneficiation strategy – strategic framework to facilitate beneficiation
28
SOUTH AFRICA’S MANUFACTURING SECTOR HAS SHRUNK
�Manufacturing as a % of GDP at 15% has continued to decline over the past three decades, versus 22% in the 1980’s and 19% in the 1990’s.
�With the exception of some niche products and the motor industry (because of the MIDP), most components of the manufacturing sector have battled to become competitive – in the face of a volatile currency and slow progress on improving total factor productivity.
�Manufacturing as a % of GDP at 15% is now just above the comparative number for the USA and compares unfavourably versus a number of countries (China 34%, South Korea 28%, Malaysia 27%, etc.).
�Low growth rates in MVA in South Africa (only 2.9% in 2010-2012) versus high MVA growth in competitors (China 8.8%, Turkey 5.5%, India 5.8%, etc.) means that the competitiveness gap between South Africa and the competitors will continue widening!
15
29
SOUTH AFRICA’S MANUFACTURING SECTOR’S SHARE OF GDP CONTINUES TO FALL
Source: StatsSA
30
SOUTH AFRICA’S MANUFACTURING SHARE OF GDP CONTINUES TO FALL
0
5
10
15
20
25
30
35
MV
A %
of
GD
P
.
Manufacturing value added as % of GDP in real terms, (source UNIDO)
1995
2006
2012
16
31
COUNTRIES THAT HAVE HIGH MVA PRODUCTIVITY GROWTH ATTRACT SIGNIFICANT INVESTMENT INTO MANUFACTURING
10.6
7.6
2.3
5.3
2.83.4
2.93.7
4.7
0.4
8.1
5.8 5.54.7
3.0 2.9 2.8 2.6 2.4 2.0
-1
1
3
5
7
9
11
13
Ch
ina
Ind
ia
Tu
rkey
Mala
ysia
Au
str
alia
So
uth
Afr
ica
S-K
ore
a
Po
lan
d
Bra
zil
US
A
% G
row
th r
ate
.
Real growth rate in manufacturing value added for the period 2005-2010, and 2010-2012 (source UNIDO/WBG)
These countries are attracting large amounts of
investment into manufacturing
These countries attract smaller share of investment
into manufacturing
32
THE MVA PRODUCTIVITY GAP BETWEEN SA AND
COMPETITORS IN MANUFACTURING IS WIDENING
If MVA growth in SA remains low vs China (10.2% growth) and
developing economies (5.2% growth) the productivity gap will
simply widen
100
120
140
160
180
200
220
240
260
1 2 3 4 5 6 7 8 9 10
years
10% MVAgrowth(China)
5% MVAgrowth(developingworld)2% MVAgrowth (SA)
17
33
GIVEN THE COST DIFFERENTIAL BETWEEN SOUTH AFRICA AND INDIA…
Cutting & polishing costs
FRIDGE estimates
Industry estimates
0
20
40
60
80
100
120
USA Israel South
Africa
Belgium Thailand China India
$/ct
0
20
40
60
80
100
120
USA Israel South
Africa
Belgium Thailand China India
$/ct
40 74
73 $/ct
Medium price differential
57 $/ct
47 99Medium price differential
Medium estimated price differential between SA and
India: 65 $/ct
No
data
34
•SA still spending about 1% of GDP on R&D.
•Better R&D incentives (150% tax write-off) has helped, but local R&D expenditures off a low base.
•There are collaborative initiatives underway on downstream beneficiation e.g. The Advanced Metals Initiative administered by DST
THE TECHNOLOGY SECTORS HAVE NOT KEPT PACE WITH INTERNATIONAL DEVELOPMENTS
18
35
RED TAPE CONTINUES TO INHIBIT ENTREPRENEURSHIP AND INDUSTRIALISATION IN CERTAIN AREAS
BadGood
0 50 100 150
Protecting investors
Getting credit
Doing Business
Dealing with construction …
Starting a business
Paying taxes
Closing a business
Registering property
Enforcing contracts
Employing workers
Trading across borders
World Bank Ease of doing business, South Africa's country ranking per category (doing business 2013)
2013
2012
2011
2010
2009
2008
2007
36
RSA IS COMPETITIVE IN SOME AREAS, BUT UNCOMPETITIVE IN MANY OF THE DRIVERS OF MANUFACTURING BENEFICIATION
0
1
2
3
4
5
6Institutions
Infrastructure
Macroeconomic stability
Health and primary education
Higher education and training
Goods market efficiency
Labour market efficiency
Financial market sophistication
Technological readiness
Market size
Business sophistication
Innovation
WEF global competitiveness scores, South Africa vs other Efficiency Driven Economies, 2012-2013
South Africa Efficiency driven economies
19
37
IN SOME AREAS THE GAP IS WIDENING!
The declining share of manufacturing is perhaps the best evidence that the business economics
environment for manufacturing is poor – versus the competitors.
Unfortunately the gap is widening!
38
PRESENTATION OUTLINE
Side-stream beneficiation
How is South Africa doing in terms of manufacturing beneficiation?
General principles of beneficiation
Key drivers of manufacturing beneficiation?
Conclusion & policy implications
Broad business support on the concept of growing beneficiation
Working collectively and strategically to facilitate beneficiation?
DMR beneficiation strategy – strategic framework to facilitate beneficiation
20
39
� National collective effort via the Beneficiation Strategy framework, IPAP5, NDP and NGP.
� A thorough assessment of why RSA has done poorly in respect of manufacturing beneficiation is necessary.
� Provide an enabling environment that attracts the manufacturing fabrication companies to come and invest in SA. This includes:
– Improving access to foreign markets for manufactured products.
– Enabling faster growth in total factor productivity.
– Develop special economic zones for manufacturing beneficiation (duty free, VAT free, US$ based accounts, tailor made infrastructure, etc.)
– Lowering the cost of capital in SA.
– Access to intermediate inputs at world competitive prices (e.g. steel)
– Providing the right types of skills for such projects.
– Improving logistical infrastructure (cost, efficiency, etc.).
– Incentives for R&D.
FOR SOUTH AFRICA TO PROMOTE GREATER MANUFACTURING BENEFICIATION WHAT IS REQUIRED?
40
� The mining sector has played, and continues to play a critical role as a foundation industry, which helps the development of other industries (especially the side-stream input industries).
� The economic health of the mining sector will materially affect the economic health of these side-stream industries.
� As per the Australian and Canadian examples, due recognition is given to side-stream beneficiation. Active support of the capital goods sector, the financial services sector, the research sector and other side-stream mining related sectors will further grow the country’s competitiveness and export capability to the benefit of all.
BUT DO NOT FORGET SIDE-STREAM BENEFICIATION
21
41
PRESENTATION OUTLINE
Side-stream beneficiation
How is South Africa doing in terms of manufacturing beneficiation?
General principles of beneficiation
Key drivers of manufacturing beneficiation?
Conclusion & policy implications
Broad business support on the concept of growing beneficiation
Working collectively and strategically to facilitate beneficiation?
DMR beneficiation strategy – strategic framework to facilitate beneficiation
42
� The mining sector is so much greater than just the sum of its direct contribution to the economy.
� While business supports the concept of growing the downstream mineral beneficiation sector, we all agree that this can only be achieved by creating a facilitating investment environment that attracts manufacturing companies to invest or expand in South Africa.
� The contribution of mining to side-stream beneficiation has traditionally been overlooked.
� Supporting and facilitating downstream and side-stream beneficiation will create more value in the economy, help grow exports and investment to the benefit of all.
� The Chamber and its members looks forward to engaging with government, Parliament and other stakeholders in this important process.
CONCLUSION
22
43
� What can mining companies do?
� Support the side-stream and downstream processes.
� Support R&D.
� Support materials funding arrangements (historically they have not worked)
� Provide inputs to the domestic fabricators at world determined prices.
� Support training.
� Support market development.
CONCLUSION
44
CONCLUSION
Mining and minerals matter for the growth, development and transformation of South
Africa