Cold Spray Metal Veneer

Thank You for Taking Time To Meet with Us Today!

What it is…Anvil Luxury Metal is a patented process

that uses finely ground metal. The result is a finish that is 90-97% actual metal. It is not

a metal looking paint but rather “A Truly Metal Finish”.

Sprayed Metal• Our metal coating has all the

same characteristics of solid metal

• It will naturally patina over time and develop the lustre of aged metal

• If you chose to have your item look relatively the same over time, then a clear coat is required

Why Use Cold Metal SprayReal Metal

Cold SprayedDurableVersatile

LightweightCost effective

Will save you time and money

Technology• Cold Sprayed Metal Coating 6 – 8 mil thick

• Puts a thin veneer of actual metal onto almost any material and surface

• 3 part component system• Metal powder, Resin, MEKP liquid

• Metal applied using basic gravity-feed spray gun

• Coating air cures in 8 hours• Once coating is cured, finishing is the same

as solid metal

Finishing with a Top Coat

• 7 Colors (Metals):• Standard Colors- Brass, Bronze, Copper, Iron,

Nickel-Silver• Premium Colors-White Bronze, and 9K Gold

• 4 Standard Finishes:• Satin,• Highlighted Patina• Polished• Satin Patina

Anvil Luxury Metal Hoods

ApplicationsRange Hoods Doors Drawer FrontsPanels Mouldings CarvingsOutdoor Cabinetry Appliances

Competitve AdvantagesThe look and feel – and perceived value – of solid metal without the weight or expenseDifferentiation of your Design compared to the CompetitionOpportunity to have high degree of detail without the cost of foundry casting Incorporating Metal into designs is a movement that will have traction for a very long time. The desired metal may change but desiring metal incorporated into interior and exterior design is here to stay.

A Few Other OpportunitiesOffer exciting and unprecedented options. Your palette has amazing new colors. Infinite design possibilities – quickly, flawlessly and affordably..Expand your vision and enhance your design with real metals!

Cold Spray Metal Veneer

Thank You for Taking Time To Meet with Us Today!

Anvil Luxury Metal Hoods

It is real metal and should be treated as such. As metal ages it naturally develops its own look. To avoid damaging the metal finish and to protect the natural beauty of the finish, please follow the Care and Cleaning Instructions carefully. FOR HIGH POLISH AND HIGHLIGHT POLISH

•Without a protective coating these finishes will oxidize and age naturally.•Never use harsh cleaners (vim and any abrasive cleaners). These will damage the finish.•To avoid water spots, dry all surfaces after each use.•Water spots and unwanted patina may be removed by applying a small amount of non-abrasive metal polish such as “Cape Cod” with a soft microfiber cloth or gently with extra fine steel wool. Then buff with a soft cloth.

FOR ANTIQUE, OIL RUB, VERDI, AND RUST FINISHES

•These finishes have patina applied to enhance the finish.•Never use harsh cleaners (vim and any abrasive cleaners). These will damage the finish.•Mineral oil, oil based polish, wax or oil based cleaner may be used to maintain the oil rubbed appearance and minimize spotting. To remove unwanted green (due to moisture) from antique and oil rub finishes use a small amount of non-abrasive metal polish with a soft cloth.•Extra fine steel wool or a soft cloth along with a small amount of non-abrasive metal polish such as “Cape Cod” may be used to remove excess Verdi or to lighten oil rubbed and antique finishes.

FOR CLEARCOATED FINISHES

•These finishes have a protective coating that will protect against water spots and natural aging•Never use harsh cleaners; these will damage the clear coat.•Use a little bit of Murphy’s oil soap diluted with water and clean item as normal•To avoid water spots, dry all surfaces with a soft cloth. For cleaning and added protection a small amount of non-abrasive metal polish may be used as a barrier between clear coat and moisture.

Care and Cleaning

Metall-FX Composite Metals: •Are non-electrically conductive•Anti-corrosive •Do not break down or contaminate•Do not produce liquid waste requiring hazardous material disposal•Are recycled metals

Metall-FX Composite Metals are a cost effective and environmentally sound alternative to solid cast pieces, forgings, metallic paints and coatings. The metal forging and metal plating industries have dangerous health consequences for employees as well as serious environmental damage from the manufacturing by-products. Metall-FX is an environmentally friendly alternative to the toxic by-products of these industries.

Environmental