Analysis of Truss With Ansys
-
Upload
asgharhabibi -
Category
Documents
-
view
243 -
download
0
Transcript of Analysis of Truss With Ansys
-
8/2/2019 Analysis of Truss With Ansys
1/35
Analysis of Truss With
Ansys
By Mohammad Azimi
-
8/2/2019 Analysis of Truss With Ansys
2/35
Select The Type Of Analysis:
Select OK:
-
8/2/2019 Analysis of Truss With Ansys
3/35
Select The Type Of Element:
Select OK:
-
8/2/2019 Analysis of Truss With Ansys
4/35
Add Real Constants:
Select Add:
-
8/2/2019 Analysis of Truss With Ansys
5/35
Import Area of Section:
Select OK:
-
8/2/2019 Analysis of Truss With Ansys
6/35
From Material Models ,Select The Structural\Linear\Elastic\Isotropic:
-
8/2/2019 Analysis of Truss With Ansys
7/35
Import Elasticity And Poisson Coefficient:
Select OK:
-
8/2/2019 Analysis of Truss With Ansys
8/35
Import Coordinate of Junction:
Select Apply After Import The Every Coordinate:
-
8/2/2019 Analysis of Truss With Ansys
9/35
-
8/2/2019 Analysis of Truss With Ansys
10/35
-
8/2/2019 Analysis of Truss With Ansys
11/35
Finally Select Cancel:
-
8/2/2019 Analysis of Truss With Ansys
12/35
Create The Links Between Nodes:
Select Apply After Every link:
-
8/2/2019 Analysis of Truss With Ansys
13/35
Model of Truss:
-
8/2/2019 Analysis of Truss With Ansys
14/35
For Numbering Of Nodes And Elements:
-
8/2/2019 Analysis of Truss With Ansys
15/35
-
8/2/2019 Analysis of Truss With Ansys
16/35
After Numbering :
-
8/2/2019 Analysis of Truss With Ansys
17/35
For Distinction the Holders:
-
8/2/2019 Analysis of Truss With Ansys
18/35
Distinct the Holders:
-
8/2/2019 Analysis of Truss With Ansys
19/35
Distinct The Degree of Freedom of Holders:
-
8/2/2019 Analysis of Truss With Ansys
20/35
For Apply Forces:
-
8/2/2019 Analysis of Truss With Ansys
21/35
Direction And Value of Force:
-
8/2/2019 Analysis of Truss With Ansys
22/35
-
8/2/2019 Analysis of Truss With Ansys
23/35
For Solve:
Select Ok:
-
8/2/2019 Analysis of Truss With Ansys
24/35
Close STATUS Command window:
-
8/2/2019 Analysis of Truss With Ansys
25/35
For See The Deformation Of Model:
-
8/2/2019 Analysis of Truss With Ansys
26/35
Define a Table :
Select Add:
-
8/2/2019 Analysis of Truss With Ansys
27/35
Import The Name Of Table:
-
8/2/2019 Analysis of Truss With Ansys
28/35
Select (By Sequence Num) From Left Window:
-
8/2/2019 Analysis of Truss With Ansys
29/35
And (LS) From Right Window:
-
8/2/2019 Analysis of Truss With Ansys
30/35
Import (1) After (LS):
-
8/2/2019 Analysis of Truss With Ansys
31/35
Select OK:
Select Close:
-
8/2/2019 Analysis of Truss With Ansys
32/35
For See The Contour Plot:
Select OK:
-
8/2/2019 Analysis of Truss With Ansys
33/35
-
8/2/2019 Analysis of Truss With Ansys
34/35
For See The Element Table Data(Maximum And Minimum Stress And Stress per Element):
Select OK:
-
8/2/2019 Analysis of Truss With Ansys
35/35