All you need is Love pillow - Aguila...
Transcript of All you need is Love pillow - Aguila...
CAP-L-3000 ROSES & LETTERS
CAP-L-3004 GIVE LOVE
CAP-L-3001 LOVE PUZZLE
CAP-L-3005 LOVE SPECKLES
CAP-L-3002XOXOXO
CAP-L-3006 LOVE BLOOMS
CAP-L-3003 LOVE LIFE
CAP-L-3007 LOVE DREAM
© 2017 Courtesy of Art Gallery Quilts LLC. All Rights Reserved.
F A B R I C S D E S I G N E D B Y A G F S T U D I O
CAP-L-3008LOVE MEANING
CAP-L-3009 ALL YOU NEED IS LOVE
ar tga l le ry fabr ics.com
FINISHED SIZE | 18" × 18"
FABR IC REQUIREMENTS
CUTT ING D IRECT IONS
¼" seam allowances are included.WOF means width of fabric.
CONSTRUCT ION
Sew all rights sides together with ¼"seam allowance.
DIAGRAM 1
DIAGRAM 2
DIAGRAM 3
•Take the 14½" x 3½" strips of hearts from fabric A
and place face to face on top of piece and sew.
•Follow the same instructions with other 14½" x 3½" strips of hearts from fabric A now on the bottom.
•See diagram below.
•Now take the 3½" x 16½" strip from fabric C place on the left corner of your block face to face and sew. Open and press
•Take the three (3) hearts of Fabric B and attach vertically to 3½" x 16½" strip from fabric C (use either fabric glue or fusible) distribute evenly and be sure to leave space on top and bottom for sewing.
•Now take the panel cut of 11½" x 10½" from fabric A and place face to face on the right side with the 3½" x 10½" strip of hearts from fabric A then sew. Open and press
Two (2) 17½" x 1½" strips from fabric B
Two (2) 1½" x 18½" strips from fabric B
Three (3) hearts from heart template from fabric B
Two (2) 14½" x 3½" strips of hearts from fabric A
One (1) 3½" x 10½" strip of hearts from fabric A
One (1) panel cut of 11½" x 10½" from fabric A (be careful to keep design centered)
One (1) 3½" x 16½" strip from fabric C
Two (2) 18" x 13" rectangles from fabric C
BACKING FABRIC Fabric C included.
Fabric A CAP-L-3009 ½ yd. Fabric B CAP-L3004 ⅛ yd. Fabric C P.E- 408 ⅝ yd.
ar tga l le ry fabr ics.com
•Lastly sew the 1½" x 18½" strips from fabric B
and sew face to face on the left and right side of block.
CREAT ING THE BACK P I LLOW
•To finish with the borders first sew the 17½" x 1½" strips from fabric B on top and bottom on block.
DIAGRAM 4
DIAGRAM 5
•To make a envelope back for your pillow take both 18" x 13" rectangles and fold one 13" side on each rectangle in 1/2" and press and then fold another 1/2" and press.
•Top stitch as close to the edge as possible.
•Place rectangles right side together on top of each other to the front of your pillow and stitch all the way around your pillow at ¼" seam allowance.
•Clip corners at seam allowance and flip piece to the right side of the fabric.
•Fill pillow with a 18" x 18" pillow form and enjoy!
Sew all rights sides together with ¼"seam allowance. Press open.
NOTE: While all possible care has been taken to ensure the accuracy of this pattern, We are not responsible for printing errors or the way in which individual work varies.Please read instructions carefully before starting the construction of this quilt. If desired, wash and iron your fabrics before starting to cut.
ar tga l le ry fabr ics.com
© 2016 Courtesy of Art Gallery Quilts LLC. All Rights Reserved.