18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 1/21

All Standards (One Page)NEMA > Standards

ANSI C119.1­2011 American National Standard for Electric Connectors­Sealed Insulated Underground Connector Systems Rated600 V

ANSI C119.4­2011 American National Standard for Electric Connectors­Connectors for Use Between Aluminum­to­Aluminum andAluminum­to­Copper Conductors Designed for Normal Operation at or Below 93°C and Copper­to­Copper

ANSI C119.5­2009 American National Standard for Electric Connectors­Insulation­Piercing Connector Systems, Rated 600 V orLess (Low Voltage Aerial Bundled Cables and Insulated and Non­Insulated Line Wires)

ANSI C119.6­2011 American National Standard for Electric Connectors­Non­Sealed, Multiport Connector Systems Rated 600 V orLess for Aluminum and Copper Conductors

ANSI C12.10­2011 American National Standard for Physical Aspects of Watthour Meters­Safety Standard

ANSI C12.11­2006 (R2014) American National Standard for Instrument Transformers for Revenue Metering, 10 kV BIL through 350 kV BIL(0.6 kV NSV through 69 kV NSV)

ANSI C12.1­2008 American National Standard for Electric Meters­Code for Electricity Metering

ANSI C12.18­2006 American National Standard for Protocol Specification for ANSI Type 2 Optical Port

ANSI C12.19­2008 American National Standard for Utility Industry End Device Data Tables

ANSI C12.20­2010 American National Standard for Electricity Meters­0.2 and 0.5 Accuracy Classes

ANSI C12.21­2006 American National Standard for Protocol Specification for Telephone Modem Communication

ANSI C12.22­2008 American National Standard for Protocol Specification for Interfacing to Data Communication Networks

ANSI C12.4­1984 (R2002, R2011) American National Standard for Registers­Mechanical Demand

ANSI C12.5­1978 (R2002, R2012) American National Standard for Thermal Demand Meters

ANSI C12.6­1987 (R2002, R2012) American National Standard for Phase­Shifting Devices Used in Metering, Marking and Arrangement ofTerminals

ANSI C12.7­2005 American National Standard for Requirements for Watthour Meter Sockets

ANSI C12.8­1981 (R2002, R2012) American National Standard for Test Blocks and Cabinets for Installation of Self­Contained A­Base WatthourMeters

ANSI C12.9­2005 American National Standard for Test Switches for Transformer­Rated Meters

ANSI C136.10­2010 American National Standard for Roadway and Area Lighting Equipment­Locking­Type Photocontrol Devicesand Mating Receptacles­Physical and Electrical Interchangeability and Testing

ANSI C136.11­2011 American National Standard for Roadway and Area Lighting Equipment­Multiple Sockets

ANSI C136.1­2012 American National Standard for Roadway and Area Lighting Equipment­Filament Lamps­A Guide for Selection

ANSI C136.12­2014 American National Standard for Roadway and Area Lighting Equipment­Mercury Lamps­Guide for Selection

ANSI C136.13­2014 American National Standard for Roadway and Area Lighting Equipment­Metal Brackets for Wood Poles

ANSI C136.14­2004 (R2009) American National Standard for Roadway and Area Lighting Equipment­Elliptically Shaped, Enclosed Side­Mounted Luminaires for Horizontal­Burning High­Intensity Discharge (HID) Lamps

ANSI C136.15­2011 American National Standard for Roadway and Area Lighting Equipment­Luminaire Field Identification

ANSI C136.16­2009 American National Standard for Roadway and Area Lighting Equipment­Enclosed, Post Top­MountedLuminaires

ANSI C136.17­2005 (R2010) American National Standard for Roadway and Area Lighting Equipment­Enclosed Side­Mounted Luminaires forHorizontal­Burning High­Intensity Discharge Lamps­Mechanical Interchangeability of Refractors

ANSI C136.18­2006 (R2010) American National Standard for Roadway and Area Lighting Equipment­High­Mast Side­Mounted Luminaires for

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 2/21

Horizontal­ or Vertical­Burning High­Intensity Discharge Lamps

ANSI C136.19­2011 American National Standard for Roadway and Area Lighting Equipment­High­Pressure Sodium (HPS) andRetrofit HPS Lamps for Mercury Ballasts­Guide for Selection

ANSI C136.20­2012 American National Standard for Roadway and Area Lighting Equipment­Fiber­Reinforced Composite (FRC)Lighting Poles

ANSI C136.21­2004 (R2009) American National Standard for Roadway and Area Lighting Equipment­Vertical Tenons Used with Post Top­Mounted Luminaires

ANSI C136.2­2004 (R2009) American National Standard for Roadway and Area Lighting Equipment­Luminaire Voltage Classification

ANSI C136.22­2004 (R2009) American National Standard for Roadway and Area Lighting Equipment­Internal Labeling of Luminaires

ANSI C136.23­2012 American National Standard for Roadway and Area Lighting Equipment­Enclosed Architectural Luminaires

ANSI C136.24­2004 (R2010) American National Standard for Roadway and Area Lighting Equipment­Non­Locking (Button)­TypePhotocontrols

ANSI C136.25­2013 American National Standard for Roadway and Area Lighting Equipment­Ingress Protection (Resistance to Dust,Solid Objects and Moisture) for Luminaire Enclosures

ANSI C136.26­2010 American National Standard for Roadway and Area Lighting Equipment­Troubleshooting Guide for High­Intensity Discharge (HID) Luminaires

ANSI C136.27­2012 American National Standard for Roadway and Area Lighting Equipment­Tunnel Lighting and UnderpassLuminaires

ANSI C136.28­2006 (R2011) American National Standard for Roadway and Area Lighting Equipment­Glass Lenses Used in Luminaires

ANSI C136.29­2011 American National Standard for Roadway and Area Lighting Equipment­Metal Halide Lamps­Guide forSelection

ANSI C136.31­2010 American National Standard for Roadway and Area Lighting Equipment­Luminaire Vibration

ANSI C136.3­2005 (R2009) American National Standard for Roadway and Area Lighting Equipment­Luminaire Attachments

ANSI C136.32­2012 American National Standard for Roadway and Area Lighting Equipment­Enclosed Setback Luminaires andDirectional Floodlights for High­Intensity Discharge (HID) Lamps

ANSI C136.33­2005 American National Standard for Roadway and Area Lighting Equipment­Plug­In Type Receptacle and Plug forHigh­Intensity Discharge (HID) Ignitors

ANSI C136.34­2004 (R2009) American National Standard for Roadway and Area Lighting Equipment­Vandal Shields for Roadway and AreaLighting Luminaires

ANSI C136.35­2009 American National Standard for Roadway and Area Lighting Equipment­Luminaire Electrical Ancillary Devices(LEAD)

ANSI C136.36A­2010 American National Standard for Roadway and Area Lighting Equipment­Aluminum Lighting Poles

ANSI C136.36B­2008 American National Standard for Roadway and Area Lighting Equipment­Concrete Lighting Poles

ANSI C136.36C­2010 American National Standard for Roadway and Area Lighting Equipment­Steel Roadway and Area LightingPoles

ANSI C136.37­2011 American National Standard for Solid State Light Sources Used in Roadway and Area Lighting

ANSI C136.38­2009 American National Standard for Roadway and Area Lighting Equipment­Induction Lighting

ANSI C136.40­2014 American National Standard for Roadway and Area Lighting Equipment­Solar Lighting Systems

ANSI C136.41­2013 American National Standard for Roadway and Area Lighting Equipment–Dimming Control Between an ExternalLocking Type Photocontrol and Ballast or Driver

ANSI C136.4­2003 (R2013) American National Standard for Roadway and Area Lighting Equipment­Series Sockets and Series­SocketReceptacles

ANSI C136.46­2013 American National Standard For Roadway and Area Lighting Equipment—Concrete Lighting Poles

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 3/21

ANSI C136.5­2003 (R2013) American National Standard for Roadway and Area Lighting Equipment­Film Cutouts

ANSI C136.6­2004 (R2012) American National Standard for Roadway and Area Lighting Equipment­Metal Heads and Reflector Assemblies­Mechanical and Optical Interchangeability

ANSI C136.9­2003 (R2012) American National Standard for Roadway and Area Lighting Equipment­Socket Support Assemblies for MetalHeads­Mechanical Interchangeability

ANSI C18.1M, Part 1­2009 American National Standard for Portable Primary Cells and Batteries with Aqueous Electrolyte­General andSpecifications

ANSI C18.1M, Part 2­2011 American National Standard for Portable Primary Cells and Batteries with Aqueous Electrolyte­Safety Standard

ANSI C18.2M, Part 1­2013 American National Standard for Portable Rechargeable Cells and Batteries­General and Specifications

ANSI C18.2M, Part 2­2014 American National Standard for Portable Rechargeable Cells and Batteries­Safety Standard

ANSI C18.3M, Part 1­2013 American National Standard for Portable Lithium Primary Cells and Batteries­General and Specifications

ANSI C18.3M, Part 2­2011 American National Standard for Portable Lithium Primary Cells and Batteries­Safety Standard

ANSI C37.50­2012 American National Standard for Switchgear­Low Voltage AC Power Circuit Breakers Used in Enclosures­TestProcedures

ANSI C37.51­2003 (R2010) American National Standard for Switchgear­Metal­Enclosed Low Voltage AC Power Circuit Breaker SwitchgearAssemblies­Conformance Test Procedures

ANSI C37.51a­2010 American National Standard for Switchgear­Metal­Enclosed Low Voltage AC Power Circuit Breaker SwitchgearAssemblies­Conformance Test Procedures­Amendment 1 Short­Time Withstand Current Tests

ANSI C37.52­1974 (R1995, R2000) American National Standard for Test Procedures for Low­Voltage AC Power Circuit Protectors Used inEnclosures

ANSI C37.54­2002 (R2010) American National Standard for Indoor AC High Voltage Circuit Breakers Applied as Removable Elements inMetal­Enclosed Switchgear­Conformance Test Procedures

ANSI C37.55­2002 (R2010) American National Standard for Switchgear­Medium Voltage Metal­Clad Assemblies­Conformance TestProcedures

ANSI C37.57­2003 (R2010) American National Standard for Switchgear­Metal­Enclosed Interrupter Switchgear Assemblies­ConformanceTesting

ANSI C37.58­2003 (R2010) American National Standard for Switchgear­Indoor AC Medium Voltage Switches for Use in Metal­EnclosedSwitchgear­Conformance Test Procedures

ANSI C37.85­2002 (R2010) American National Standard for AC High Voltage Power Vacuum Interrupters­Safety Requirements for X­Radiation Limits

ANSI C62.61­1993 American National Standard for Gas Tube Surge Arresters on Wire Line Telephone Circuits

ANSI C78.1340­1990 (R1995)(ANSI copyright)

450W Self­Ballasted Mercury Lamps

ANSI C78.1341­1990 (R1995)(ANSI copyright)

750­Watt, 120­Volt Self­Ballasted Mercury Lamps

ANSI C78.1342­1990 (R1995)(ANSI copyright)

160­Watt, 120­Volt B87 Self­Ballasted Mercury Halide Lamps

ANSI C78.1372­1997 70­Watt, M98 Single­Ended Metal Halide Lamps

ANSI C78.1374­1996 50­Watt, M110 Single­Ended Metal­Halide Lamps

ANSI C78.1375­1996 400­Watt, M59 Single­Ended Metal Halide Lamps

ANSI C78.1376­1996 1000­Watt, M47 Single­Ended Metal Halide Lamps

ANSI C78.1377­1996 175­Watt, M57 Single­Ended Metal Halide Lamps

ANSI C78.1378­1997 250­Watt, M58 Single­Ended Metal Halide Lamps

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 4/21

ANSI C78.1379­1997 1500­Watt, M48 Single­Ended Metal­Halide Lamps

ANSI C78.1380­1988 (ANSICopyright)

Electric Lamps­250 Watt, 120 Volt, Self­Ballasted Mercury Lamps Specifications

ANSI C78.1381­1998 American National Standard for Electric Lamps­70 W, M85 Double­Ended Metal Halide Lamps

ANSI C78.1382­1996 100­Watt, M90 Single­Ended Metal Halide Lamps

ANSI C78.1384­1997 150­Watt, M102 Single­Ended Metal­Halide Lamps

ANSI C78.1401­2004 American National Standard for Electric Lamps­Dimensions for Projection Lamps­Double­Contact, Medium­Ring,Base­Up Type

ANSI C78.1402­2004 American National Standard for Electric Lamps­Four­Pin, Prefocus, Base­Down Type

ANSI C78.1403­1997 American National Standard for Electric Lamps­Tungsten Halogen (TH) Lamps with G6.35, GX6.35 and GY6.35Bases

ANSI C78.1404­1991 (R1995)(ANSI copyright)

DNF Projection Lamps

ANSI C78.1406­2004 American National Standard for Electric Lamps­P28 Single­Contact Medium Prefocus­Based Projection Lampsfor Base­Down Operation­Dimensions

ANSI C78.1407­2004 American National Standard for Electric Lamps­Condenser­Reflector, Four­Pin Prefocus­Base Projection Lamps­Dimensions

ANSI C78.1408­2004 American National Standard for Electric Lamps­CBA Projection Lamp

ANSI C78.1409­1991 (R1995)(ANSI copyright)

EJL Projection Lamp

ANSI C78.1410­1991 (R1995)(ANSI copyright)

ELB Projection Lamp

ANSI C78.1411­1991 (R1995)(ANSI copyright)

ELC Projection Lamp

ANSI C78.1412­1991 (R1995)(ANSI copyright)

EMM Projection Lamp

ANSI C78.1413­2001 American National Standard for Dimensions and Centering Systems for Projection Lamps­51 mm (2 in.) IntegralReflector, Rim Reference Lamps with GX5.3, GY5.3 and GU5.3 Bases

ANSI C78.1414­1988 (R1994)(ANSI copyright)

DDM Projection Lamp

ANSI C78.1415­1989 (R1994)(ANSI copyright)

DED Projection Lamp

ANSI C78.1417­1997 American National Standard for 1.65 in. (42 mm) Integral Reflector, Rim Reference Projection Lamps withGX5.3 or GY5.3 Bases­Dimensions and Centering Systems

ANSI C78.1418­1991 (R1995)(ANSI copyright)

EYB Projection Lamp

ANSI C78.1419­1991 (R1995)(ANSI copyright)

EML Projection Lamp

ANSI C78.1420­2001 American National Standard for Microfilm Projection Lamps­2 in. (51 mm) Dichroic Coated Integral Reflector,Rim Reference Tungsten Halogen Lamps with GX5.3 Bases

ANSI C78.1421­2002 American National Standard for Dimensions and Centering Systems for Projection Lamps­35 mm IntegralReflector, Rim Reference Lamps with GZ4 Bases

ANSI C78.1430­1997 American National Standard for Slide Projector Lamps­Condensing, Dichroic, 1.65 in. (42 mm), IntegralReflector, Rim Reference Tungsten Halogen Lamps with GX5.3 Bases

ANSI C78.1431­1997 American National Standard for Electric Lamps­Slide Projector Lamps, Condensing, Dichroic, 2 in. (51 mm),Integral Reflector, Rim Reference Tungsten Halogen Lamps with GY5.3 Bases

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 5/21

ANSI C78.1432­1997 American National Standard for Tungsten Halogen (TH) Lamps with GZ9.5 Two­Pin, Prefocus Bases and 36.5mm Nominal Light Center Length

ANSI C78.1433­2001 American National Standard for 2 in. (51 mm) Dichroic Coated Integral Reflector, Rim Reference TungstenHalogen (TH) Large­Screen Projection Lamps with GX5.3 Bases

ANSI C78.1434­2001 American National Standard for Condensing Dichroic Coated Integral Reflector Side­Pin Tungsten Halogen(TH) Projection Lamps with GX7.9 Bases

ANSI C78.1435­2002 American National Standard for Projection Lamps­Tungsten Halogen Lamps with G5.3 Bases

ANSI C78.1450­1983 (R2002) American National Standard for Projection Lamps, Incandescent­Method for Life Testing

ANSI C78.1451­2002 American National Standard for Electric Lamps­Use of Protective Shields with Tungsten Halogen (TH) Lamps­Cautionary Notice

ANSI C78.1452­2004 American National Standard for Electric Lamps­Projection Lamps­Vocabulary

ANSI C78.1460­2004 American National Standard for Electric Lamps­Single­Ended Tungsten Halogen (TH) Lamps with GZ9.5 Base,T6 Bulb, 36.5 mm Light Center Length (LCL), 76.2 mm MOL with Proximity Reflector

ANSI C78.1500­2001 American National Standard for Tungsten Halogen (TH) Lamps with a Light Center Length (LCL) of 89 mm (3½in.)

ANSI C78.1501­2001 American National Standard for Tungsten Halogen (TH) Lamps with a Light Center Length (LCL) of 63.5 mm(2½ in.)

ANSI C78.1503­2001 American National Standard for Tungsten Halogen (TH) Lamps with G9.5 Bases and 60.5 mm Light CenterLength (LCL)

ANSI C78.1504­2001 American National Standard for Tungsten Halogen (TH) Lamps with P28 Bases and 55.5 mm Light CenterLength (LCL)

ANSI C78.1505­2001 American National Standard for Tungsten Halogen (TH) Lamps with G38 Bases and 127 mm Light CenterLength (LCL)

ANSI C78.180­2003 American National Standard for Electric Lamps­Specifications for Fluorescent Lamp Starters

ANSI C78.20­2003 American National Standard for Electric Lamps­A, G, PS and Similar Shapes with E26 Medium Screw Bases

ANSI C78.21­2011 American National Standard for Electric Lamps­PAR and R Shapes

ANSI C78.22­1995 (R2003) American National Standard for Incandescent Lamps­A, G, PS and Similar Shapes with E39 Mogul ScrewBases

ANSI C78.23­1995 (R2003) American National Standard for Incandescent Lamps­Miscellaneous Types

ANSI C78.24­2001 American National Standard for 2 in. (51 mm) Integral­Reflector Lamps with Front Covers and GU5.3 or GX5.3Bases

ANSI C78.260­2002 American National Standard for Tubular Tungsten Halogen (TH) Lamps­Physical Characteristics

ANSI C78.261­1977 (R2007) American National Standard for Specification for Tubular Incandescent Infrared Lamps

ANSI C78.30­1997 American National Standard for Electric Lamps­Procedure for Use in Preparation of Lamp Space Drawings

ANSI C78.357­2010 American National Standard for Incandescent Lamps Tungsten Halogen Lamps (Non­Vehicle)

ANSI C78.370.390­2002 American National Standard for Electric Lamps­Amendments to ANSI C78.370­1997 and ANSI C78.390­1998

ANSI C78.370­1997 (R2003) American National Standard for Method of Designation for Electric Lamps­Photographic, Stage and Studio

ANSI C78.375­2014 American National Standard for Fluorescent Lamps­Guide for Electrical Measurements

ANSI C78.376­2001 American National Standard for Specifications for the Chromaticity of Fluorescent Lamps

ANSI C78.377­2011 American National Standard for Electric Lamps­Specifications for the Chromaticity of Solid State Lighting (SSL)Products

ANSI C78.379­2006 American National Standard for Electric Lamps­Classification of the Beam Patterns of Reflector Lamps

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 6/21

ANSI C78.380­2007 American National Standard for Electric Lamps­High­Intensity Discharge (HID)­Method of Designation

ANSI C78.386­1989 (R1994) Mercury Lamps­Method of Measuring Characteristics

ANSI C78.389­2004 (R2009) American National Standard for Electric Lamps­High­Intensity Discharge (HID)­Methods of MeasuringCharacteristics

ANSI C78.390­2006 American National Standard for Electric Lamps­Miniature and Sealed­Beam Incandescent Lamps­Method ofDesignation

ANSI C78.391­2004 American National Standard for Electric Lamps­Characteristics of Miniature Lamps of T1 and T1¾ Shapes

ANSI C78.40­2011 American National Standard for Electric Lamps­Specifications for Mercury Lamps

ANSI C78.41­2006 American National Standard for Electric Lamps­Guidelines for Low­Pressure Sodium (LPS) Lamps

ANSI C78.43­2013 American National Standard for Electric Lamps­Single­Ended Metal Halide Lamps

ANSI C78.44­2008 American National Standard for Electric Lamps­Double­Ended Metal Halide Lamps

ANSI C78.45­2007 American National Standard for Electric Lamps­Self­Ballasted Mercury Lamps

ANSI C78.50­2014 American National Standard for Electric Lamps–Assigned LED Lamp Codes

ANSI C78.5­2003 American National Standard for Electric Lamps­Specifications for Performance of Self­Ballasted CompactFluorescent Lamps

ANSI C78.60432:1­2007 American National Standard for Electric Lamps­Incandescent Lamps­Safety Specifications, Part 1 TungstenFilament Lamps for Domestic and Similar General Lighting Purposes

ANSI C78.60432:2­2007 American National Standard for Electric Lamps­Safety Specifications, Part 2 Tungsten Halogen (TH) Lamps forDomestic and Similar General Lighting Purposes

ANSI C78.60432:3­2007 American National Standard for Electric Lamps­Incandescent Lamps­Safety Specifications, Part 3 TungstenHalogen (TH) Lamps (Non­Vehicle)

ANSI C78.79­2014 American National Standard for Electric Lamps–Nomenclature for Envelope Shapes Intended for Use withElectric Lamps

ANSI C78.81­2013 American National Standard for Electric Lamps­Double­Capped Fluorescent Lamps­Dimensional and ElectricalCharacteristics

ANSI C78.901­2014 American National Standard for Electric Lamps­Single­Based Fluorescent Lamps­Dimensional and ElectricalCharacteristics

ANSI C79.1­2002 American National Standard for Nomenclature for Glass Bulbs Intended for Use with Electric Lamps

ANSI C80.1­2005 American National Standard for Electric Rigid Steel Conduit (ERSC)

ANSI C80.3­2005 American National Standard for Steel Electrical Metallic Tubing (EMT)

ANSI C80.5­2005 American National Standard for Electrical Rigid Aluminum Conduit (ERAC)

ANSI C80.6­2005 American National Standard for Intermediate Metal Conduit (EIMC)

ANSI C81.61­2009 American National Standard for Electrical Lamp Bases­Specifications for Bases (Caps) for Electric Lamps

ANSI C81.62­2009 American National Standard for Electric Lampholders

ANSI C81.63­2007 American National Standard for Gauges for Electric Lamp Bases and Lampholders

ANSI C82.11­2011 American National Standard for Lamp Ballasts­High Frequency Fluorescent Lamp Ballasts

ANSI C82.1­2004 American National Standard for Lamp Ballasts­Line Frequency Fluorescent Lamp Ballasts

ANSI C82.12­1999 American National Standard for Lamp Ballasts­Fluorescent Adapters

ANSI C82.13­2002 American National Standard for Lamp Ballasts­Definitions­for Fluorescent Lamps and Ballasts

ANSI C82.14­2006 American National Standard for Lamp Ballasts­Low­Frequency Square Wave Electronic Ballasts­for Metal

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 7/21

Halide Lamps

ANSI C82.2­2002 American National Standard for Lamp Ballasts­Method of Measurement of Fluorescent Lamp Ballasts

ANSI C82.3­2002 American National Standard for Reference Ballasts for Fluorescent Lamps

ANSI C82.4­2002 American National Standard for Lamp Ballasts­Ballasts for High­Intensity Discharge and Low­Pressure Sodium(LPS) Lamps (Multiple­Supply Type)

ANSI C82.6­2005 American National Standard for Lamp Ballasts­Ballasts for High­Intensity Discharge (HID) Lamps­MethodsofMeasurement

ANSI C82.77­2002 American National Standard for Harmonic Emission Limits­Related Power Quality Requirements for LightingEquipment

ANSI C82.9­2010 American National Standard for Lamp Ballasts­High­Intensity Discharge (HID) and Low­Pressure Sodium (LPS)Lamps­Definitions

ANSI C84.1­2011 American National Standard for Electric Power Systems and Equipment­Voltage Ratings (60 Hz)

ANSI Z535.1­2006 (R2011) American National Standard for Safety Colors

ANSI Z535.2­2011 American National Standard for Environmental and Facility Safety Signs

ANSI Z535.3­2011 American National Standard for Criteria for Safety Symbols

ANSI Z535.4­2011 American National Standard for Product Safety Signs and Labels

ANSI Z535.5­2011 American National Standard for Safety Tags and Barricade Tapes (for Temporary Hazards)

ANSI Z535.6­2011 American National Standard for Product Safety Information in Product Manuals, Instructions and OtherCollateral Materials

ANSI Z535­2011 ANSI Z535 Color Chart

ANSI/ANSLG C78.42­2009 American National Standard for Electric Lamps­High­Pressure Sodium (HPS) Lamps

ANSI/IEC 60529­2004 (R2011) American National Standard for Degrees of Protection Provided by Enclosures (IP Code) (Identical NationalAdoption)

ANSI/IEC 60974­11­2009 American National Standard for Arc­Welding Equipment­Part 11 Electrode Holders

ANSI/IEC 60974­1­2008 American National Standard for Arc­Welding Equipment­Part 1 Welding Power Sources

ANSI/IEC 60974­12­2009 American National Standard for Arc­Welding Equipment­Part 12 Coupling Devices for Welding Cables

ANSI/IEC 60974­2­2009 American National Standard for Arc­Welding Equipment­Part 2 Liquid Cooling Systems

ANSI/IEC 60974­3­2009 American National Standard for Arc­Welding Equipment­Part 3 Arc Striking and Stabilizing Devices

ANSI/IEC 60974­5­2009 American National Standard for Arc­Welding Equipment­Part 5 Wire Feeders

ANSI/IEC 60974­7­2009 American National Standard for Arc­Welding Equipment­Part 7 Torches

ANSI/IEC 60974­8­2008 American National Standard for Arc­Welding Equipment­Part 8 Gas Consoles for Welding and Plasma CuttingSystems

ANSI/IEC 62430­2010 Environmentally Conscious Design for Electrical and Electronic Products

ANSI/IEC C78.682­1997 (R2010) American National Standard for Electric Lamps­Standard Method of Measuring the Pinch Temperature of QuartzTungsten­Halogen Lamps

ANSI/IEC C81.64­2005 American National Standard­Guidelines and General Information for Electrical Lamp Bases, Lampholders andGauges

ANSI/NEMA AB 3­2013 Molded­Case Circuit Breakers and Their Application

ANSI/NEMA AB 4­2009 Guidelines for Inspection and Preventive Maintenance of Molded­Case Circuit Breakers Used in Commercialand Industrial Applications

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 8/21

ANSI/NEMA C29.10­1989 (R2002,R2012)

American National Standard for Wet­Process Porcelain Insulators­Indoor Apparatus Type

ANSI/NEMA C29.11­2012 American National Standard for Composite Insulators­Tests Methods

ANSI/NEMA C29.1­1988 (R2002,R2012)

American National Standard for Electrical Power Insulators­Test Methods

ANSI/NEMA C29.12­2013 American National Standard for Composite Insulators­Transmission Suspension Type

ANSI/NEMA C29.13­2012 American National Standard for Insulators­Composite­Distribution Deadend Type

ANSI/NEMA C29.17­2013 American National Standard for Composite Insulators­Transmission Line Post Type

ANSI/NEMA C29.18­2013 American National Standard for Composite Insulators­Distribution Line Post Type

ANSI/NEMA C29.2­2012 American National Standard for Insulators­Wet­Process Porcelain and Toughened Glass­Suspension Type

ANSI/NEMA C29.2A­2013 American National Standard for Insulators Wet Process Porcelain and Toughened Glass—DistributionSuspension Type

ANSI/NEMA C29.2B­2013 American National Standard for Insulators­Wet Process Porcelain and Toughened Glass—TransmissionSuspension Type

ANSI/NEMA C29.3­1986 (R2002,R2012)

American National Standard for Wet­Process Porcelain Insulators­Spool Type

ANSI/NEMA C29.4­1989 (R2002,R2012)

American National Standard for Wet­Process Porcelain Insulators­Strain Type

ANSI/NEMA C29.5­1984 (R2002,R2012)

American National Standard for Wet­Process Porcelain Insulators­Low and Medium Voltage Types

ANSI/NEMA C29.6­1994 (R2002,R2012)

American National Standard for Wet­Process Porcelain Insulators­High Voltage Pin Type

ANSI/NEMA C29.7­1996 (R2002,R2012)

American National Standard for Wet­Process Porcelain Insulators­High­Voltage Line­Post Type

ANSI/NEMA C29.8­1985 (R2002,R2012)

American National Standard for Wet­Process Porcelain Insulators­Apparatus, Cap and Pin Type

ANSI/NEMA C29.9­1983 (R2002,R2012)

American National Standard for Wet­Process Porcelain Insulators­Apparatus, Post Type

ANSI/NEMA C50.41­2012 American National Standard for Polyphase Induction Motors for Power Generation Stations

ANSI/NEMA C78.LL 1256­2003 Procedures for Fluorescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure(TCLP)

ANSI/NEMA C78.LL 3­2003 American National Standards for Procedures for High­Intensity Discharge (HID) Lamp Sample Preparation andthe Toxicity Characteristic Leaching Procedure (TCLP)

ANSI/NEMA C78.LL 4­2003 American National Standard for Procedures for Incandescent Lamp Sample Preparation and the ToxicityCharacteristic Leaching Procedure (TCLP)

ANSI/NEMA C93.1­1999 American National Standard for Requirements for Power­Line Carrier Coupling Capacitors and CouplingCapacitor Voltage Transformers (CCVTs)

ANSI/NEMA CC 1­2009 Electric Power Connectors for Substations

ANSI/NEMA FB 11­2000 Plugs, Receptacles and Connectors of the Pin­and­Sleeve Type for Hazardous Locations

ANSI/NEMA FB 1­2012 Fittings, Cast Metal Boxes and Conduit Bodies for Conduit, Electrical Metallic Tubing (EMT) and Cable

ANSI/NEMA FI 1­2004 Manufactured Electrical Mica

ANSI/NEMA FI 3­2004 Calendered Aramid Papers Used for Electrical Insulation

ANSI/NEMA FL 1­2009 Flashlight Basic Performance Standard

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 9/21

ANSI/NEMA GR 1­2007 Grounding Rod Electrodes and Grounding Rod Electrode Couplings

ANSI/NEMA HP 3­2012 Electrical and Electronic Polytetrafluoroethylene (PTFE) Insulated High­Temperature Hook­Up Wire, Types ET(250 V), E (600 V) and EE (1,000 V)

ANSI/NEMA HP 4­2012 Electrical and Electronic Fluorinated Ethylene Propylene (FEP) Insulated High­Temperature Hook­Up Wire,Types KT (250 V), K (600 V) and KK (1,000 V)

ANSI/NEMA HP 5­2013 Electrical and Electronic Crosslinked, Modified Polyethylene (XLPE) Insulated 125°C Hook­Up Wire, Types L(600 V), LL (1,000 V) and LX (3,000 V)

ANSI/NEMA HP 6­2013 Electrical and Electronic Silicone and Silicone­Braided Insulated Hook­Up Wire Types S (600 V), ZHS (600 V),SS (1,000 V), ZHSS (1,000 V) and SSB Braided (1,000 V)

ANSI/NEMA HP 8­2013 Electrical and Electronic Cross­Linked, Modified Low­Smoke Polyolefin (XLPO) Insulated Hook­Up Wire, TypesLS (rated 105°C; 600 V), ZHDM (rated 90°C; 600 V), ZHDH (rated 90°C; 600 V), ZH (rated 125°C; 600 V), andZHX (rated 125°C; 1000 V)

ANSI/NEMA ICS 8­2011 Application Guide for Industrial Control and Systems Crane and Hoist Controllers

ANSI/NEMA KS 2­2013 Distribution Equipment Switch Application Guide, A User's Reference

ANSI/NEMA LD 3­2005 High­Pressure Decorative Laminates (HPDL)

ANSI/NEMA MW 1000­2014 Magnet Wire

ANSI/NEMA OS 1­2013 Sheet­Steel Outlet Boxes, Device Boxes, Covers and Box Supports

ANSI/NEMA OS 2­2013 Nonmetallic Outlet Boxes, Device Boxes, Covers and Box Supports

ANSI/NEMA PB 1.1­2013 General Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or Less

ANSI/NEMA PB 2.1­2013 General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront DistributionSwitchboards Rated 600 Volts or Less

ANSI/NEMA SB 40­2010 Communications Systems for Life Safety in Schools

ANSI/NEMA SG­IC 1­2013 Smart Grid Interoperable & Conformant (SG­IC) Testing and Certification Scheme Operator Guidelines

ANSI/NEMA WC 27500­2012 Standard for Aerospace and Industrial Electrical Cable

ANSI/NEMA WC 51­2009/ICEA P­54­440

Ampacities of Cables Installed in Cable Trays

ANSI/NEMA WC 53­2008/ICEA T­27­581

Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation and Portable Cables for Test

ANSI/NEMA WC 54/ICEA T­26­465­2013

Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation and Portable Cables forTest

ANSI/NEMA WC 55021­2013 Standard for Military Internal Electrical Cable

ANSI/NEMA WC 57­2004/ICEA S­73­532

Standard for Control, Thermocouple Extension and Instrumentation Cables

ANSI/NEMA WC 61­2005 Transfer Impedance Testing

ANSI/NEMA WC 63.2­1996 (R2003) Performance Standard for Coaxial Premise Data Communications Cables

ANSI/NEMA WC 66/ICEA S­116­732­2013

Standard for Category 6 and 6A, 100 Ohm, Individually Unshielded Twisted Pairs, Indoor Cables (With OrWithout An Overall Shield) For Use In LAN Communication Wiring Systems

ANSI/NEMA WC 67­2012 Standard for Uninsulated Conductors Used in Electrical and Electronic Applications

ANSI/NEMA WC 70­2009/ICEA S­95­658­2009

Power Cables Rated 2,000 V or Less for the Distribution of Electrical Energy

ANSI/NEMA WC 71­1999/ICEA S­96­659­1999

Standard for Non­Shielded Cables Rated 2,001­5,000 V for Use in the Distribution of Electric Energy

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 10/21

ANSI/NEMA WC 74/ICEA S­93­639­2012

5­46 kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy

ANSI/NEMA WD 6­2012 Wiring Devices­Dimensional Specifications

HIMSS/NEMA HN 1­2013 Manufacturer Disclosure Statement for Medical Device Security

NEMA 107­1987 (R1993) Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage Apparatus

NEMA 250­2008 Enclosures for Electrical Equipment (1,000 V Maximum)

NEMA 260­1996 (2004) Safety Labels for Pad­Mounted Switchgear and Transformers Sited in Public Areas

NEMA 410­2011 Performance Testing for Lighting Controls and Switching Devices with Electronic Drivers and Discharge Ballasts

NEMA 5RN 2189­2003 User Guide to Product Specifications for Metal Electrical Conduit and Tubing

NEMA AB 1 Molded­Case Circuit Breakers, Molded Case Switches, and Circuit­Breaker Enclosures

NEMA AB 5­2011 Establishing Levels of Selective Coordination for Low Voltage Circuit Breakers

NEMA ABP 1­2010 Selective Coordination

NEMA ABP 2­2011 Recommendations on AFCI / Home Electrical Product Compatibility

NEMA ABP 3­2013 Molded Case Circuit Breaker Systems Testing with Conductors

NEMA ABP 4­2013 Taking the Guesswork Out of Selecting and Maintaining Molded Case Circuit Breakers

NEMA BL 1­1997 (R2002) Fluorescent Ballast Connector

NEMA BL 2­2009 Energy Efficiency for Electronic Ballasts for T8 Fluorescent Lamps

NEMA BL 3­2013 Dimming Ballast Energy Performance

NEMA BU 1 Busways

NEMA BU 1.1­2005 (Spanish) Instrucciones Generales para el Manejo, Instalacion, Operacion y Mantenimiento de Electroductos Hasta 600V Nominales o Menos

NEMA BU 1.1­2010 General Instructions for Handling, Installation, Operation and Maintenance of Busway Rated 600 V or Less

NEMA BU 1.2­2002 (R2008,R2013)

Application Information for Busway Rated 600 V or Less

NEMA C12.24 TR­2011 NEMA Technical Report Definitions for Calculations of VA, VAh, VAR, and VARh for Poly­Phase ElectricityMeters

NEMA C12.30 TR­2013 Test Requirements for Metering Devices Equipped with Service Switches

NEMA CB 1­2000 (R2012) Brushes for Electrical Machines

NEMA CG 1­2013 Manufactured Graphite/Carbon Electrodes

NEMA CG 2­2004 Powdered Graphite

NEMA CG 3.2­1998 Torquing Devices for Electrodes­Selection Through Disposal

NEMA CP 1­2000 (R2008) Shunt Capacitors

NEMA DC 10­2009 Residential Controls­Temperature Limit Controls for Electric Baseboard Heaters

NEMA DC 12­1985 (R1991, R1996,R2002, R2008, R2013)

Residential Controls­Hot Water Immersion Controls

NEMA DC 13­1979 (R1985, R1991,R1997, R2002, R2008, R2013)

Residential Controls­Line Voltage Integrally Mounted Thermostats for Electric Heaters

NEMA DC 20­1992 (R2003, R2009) Residential Controls­Class 2 Transformers

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 11/21

NEMA DC 2­1982 (R1988) Quick­Connect Terminals

NEMA DC 3, Annex A­2013 Energy­Efficiency Requirements for Programmable Thermostats

NEMA DC 3­2013 Residential Controls­Electrical Wall­Mounted Room Thermostats

NEMA DC 5­1989 (R1996, R2002,R2008)

Residential Controls­Surface­Type Controls for Electric Storage Water Heaters

NEMA EI 21.1­1993 (R2002) Instrument Transformers for Revenue Metering (110 kV BIL and Less)

NEMA EI 21.2­1991 (R1997,R2002)

Instrument Transformers for Revenue Metering (125 kV BIL through 350 kV BIL)

NEMA EM 1­2010 Exit Sign Visibility Testing Requirements for Safety and Energy Efficiency

NEMA EW 1­1988 (R1994, R1999,R2004)

Electric Arc­Welding Power Sources

NEMA EW 3­1983 (R1995, R1999,R2002)

Semi­Automatic Wire­Feed Systems for Arc Welding

NEMA EW 4­2009 Graphic Symbols for Arc­Welding and Cutting Apparatus

NEMA EW 6­2006 Guidelines for Precautionary Labeling for Arc­Welding and Cutting Products

NEMA EW 9­2012 Arc Welding Power Sources–Energy Consumption Testing and Labeling

NEMA FB 2.10­2013 Selection and Installation Guidelines for Fittings for Use with Non­Flexible Electrical Metal Conduit or Tubing(Rigid Metal Conduit, Intermediate Metal Conduit and Electrical Metallic Tubing)

NEMA FB 2.20­2012 Selection and Installation Guidelines for Fittings for Use with Flexible Electrical Conduit and Cable

NEMA FG 1­1993 Fiberglass Cable Tray Systems

NEMA FI 2­1992 (R1999, R2004) Untreated Mica Paper Used for Electrical Insulation

NEMA FU 1­2012 Low Voltage Cartridge Fuses

NEMA HP 100­1991 (R1999,R2005, R2010) Series (HP 100­100.4)

High­Temperature Instrumentation and Control Cables

NEMA HP 7­2011 Electrical and Electronic PVC, PVC/Nylon, and PE/Nylon 105ºC Hook­Up Wire, Types B, C, D, BN, CN, and DN(600, 1000, and 3000 V), and Types J and JN 75ºC (600V)

NEMA HV 2­2014 Suspension and Post Type Insulators for Electric Power Overhead Lines General Use Information

NEMA IA 2.1­2005 Programmable Controllers (PLC), Part 1 General Information

NEMA IA 2.2­2005 Programmable Controllers (PLC), Part 2 Equipment Requirements and Test

NEMA IA 2.3­2005 Programmable Controllers (PLC), Part 3 Programming Languages

NEMA IA 2.4­2005 Programmable Controllers (PLC), Part 4 User Guidelines

NEMA IA 2.5­2005 Programmable Controllers (PLC), Part 5 Communications

NEMA IA 2.7­2005 Programmable Controllers (PLC), Part 7 Fuzzy Control Programming

NEMA IA 2.8­2005 Programmable Controllers (PLC), Part 8 Guidelines for the Application and Implementation of ProgrammingLanguages

NEMA ICS 1.1­1984 (R1988,R1993, R1998, R2003, R2009)

Safety Guidelines for the Application, Installation and Maintenance of Solid State Control

NEMA ICS 1.3­1986 (R2001,R2009)

Preventive Maintenance of Industrial Control and Systems Equipment

NEMA ICS 10­2005, Part 1 Part 1 Electromechanical AC Transfer Switch Equipment

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 12/21

NEMA ICS 10­2005, Part 2 AC Transfer Equipment, Part 2 Static AC Transfer Equipment

NEMA ICS 10­2010, Part 3 Safety Bulletin NEMA Safety Considerations for Residential Transfer Equipment and Residential TransferSwitches

NEMA ICS 12.1­1997 Industrial Control and Systems Profiles of Networked Industrial Devices­Part 1 General Rules

NEMA ICS 1­2000 (R2005, R2008) Industrial Control and Systems General Requirements

NEMA ICS 14­2010 Application Guide for Electric Fire Pump Controllers

NEMA ICS 15.1­2012 Instructions for the Handling, Installation, Operation, and Maintenance of Medium Voltage Electric Fire PumpControllers Rated Not More Than 7200V

NEMA ICS 15­2011 Instructions for the Handling, Installation, Operation and Maintenance of Electric Fire Pump Controllers RatedNot More Than 600 V

NEMA ICS 16­2001 Motion/Position Control Motors, Controls and Feedback Devices

NEMA ICS 18­2001 (R2007) Motor Control Centers

NEMA ICS 19­2002 (R2007) Diagrams, Device Designations and Symbols

NEMA ICS 2.3­1995 (R2002,R2008)

Instructions for the Handling, Installation, Operation and Maintenance of Motor Control Centers Rated Not MoreThan 600 V

NEMA ICS 2.4­2003 (R2012) NEMA and IEC Devices for Motor Service­A Guide for Understanding the Differences

NEMA ICS 20­2009 Informational Guide to Electrical Industrial Topics

NEMA ICS 2­1996, Part 8 (R2004,R2009)

Controllers, Contactors and Overload Relays Rated Not More Than 2,000 V AC or 750 V DC, Part 8 DisconnectDevices for Use in Industrial Control Equipment

NEMA ICS 2­2000 (R2005) Controllers, Contactors and Overload Relays Rated 600 V

NEMA ICS 2­2002, Part 9 (R2007,R2013)

AC Vacuum­Break Magnetic Controllers Rated 1,500 V AC

NEMA ICS 3.1­2009 Guide for the Application, Handling, Storage, Installation and Maintenance of Medium Voltage AC Contactors,Controllers and Control Centers

NEMA ICS 3­2005 (R2010) Medium Voltage Controllers Rated 2,001 to 7,200 V AC

NEMA ICS 4­2010 Application Guideline for Terminal Blocks

NEMA ICS 5, Annex B­2002(R2008)

Typical Proximity Switch Specifications

NEMA ICS 5, Annex E­2002(R2008)

Additional Requirements for Proximity Switches Suitable for Use in Strong Magnetic Fields

NEMA ICS 5, Annex F­2002(R2007, R2012)

High­Pressure Power Wash Test Procedure for Self­Contained Control­Circuit Devices

NEMA ICS 5­2000 (R2005, R2010) Control Circuit and Pilot Devices

NEMA ICS 61800­1­2002 (R2007) Adjustable Speed Electrical Power Drive Systems, Part 1 General Requirements­Rating Specifications for LowVoltage Adjustable­Speed DC Power Drive Systems

NEMA ICS 61800­2­2005 Adjustable Speed Electrical Power Drive Systems, Part 2 General Requirements­Rating Specifications for LowVoltage Adjustable Frequency AC Power Drive Systems

NEMA ICS 61800­4­2004 Adjustable Speed Electrical Power Drive Systems, Part 4 General Requirements­Rating Specifications for ACPower Drive Systems Above 1,000 V AC and Not Exceeding 35 kV

NEMA ICS 6­1993 (R2001, R2006) Industrial Control and Systems Enclosures

NEMA ICS 7.1­2014 Safety Standards for Construction and Guide for Selection, Installation and Operation of Adjustable SpeedDrive Systems

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 13/21

NEMA ICS 7­2014 Adjustable Speed Drives

NEMA IIC 1 v02 Digital Imaging and Communications in Security Information Object Definitions (IODs)

NEMA KS 1­2013 Heavy Duty Enclosed and Dead­Front Switches (600 Volts Maximum)

NEMA KS 3­2010 Guidelines for Inspection and Preventive Maintenance of Switches Used in Commercial and IndustrialApplications

NEMA LA 1­2009 Surge Arresters

NEMA LC 1­2007 (R2013) Test Procedure for Compatibility of Hearing Aids and Ultrasonic Lighting Control Devices

NEMA LD 3.1­1995 Performance, Application, Fabrication, and Installation of High Pressure Decorative Laminates

NEMA LE 4­2012 Recessed Luminaires­Ceiling Compatibility

NEMA LE 5­2001 Procedure for Determining Luminaire Efficacy Ratings for Fluorescent Luminaires

NEMA LE 5A­1999 Procedure for Determining Luminaire Efficacy Ratings for Commercial, Non­Residential Downlight Luminaires

NEMA LE 5B­1998 Procedure for Determining Luminaire Efficacy Ratings for High­Intensity Discharge (HID) Industrial Luminaires

NEMA LE 6­2009 Procedure for Determining Target Efficacy Ratings (TER) for Commercial, Industrial and Residential Luminaires

NEMA LI 1­1998 (R2011) Industrial Laminated Thermosetting Products

NEMA LI 6­1993 (R1999, R2005) Relative Temperature Indices of Industrial Thermosetting Laminates

NEMA LL 1­1997 Procedures for Linear Fluorescent Lamp Sample Preparation and the TCLP

NEMA LL 2­1997 (R2002) Procedures for Pin­Based Compact Fluorescent Lamp Sample Preparation and the TCLP

NEMA LL 3­1999 Procedures for High­intensity Discharge Lamp Sample Preparation and the TCLP

NEMA LL 4­1999 Procedures for Incandescent Lamp Sample Preparation and the TCLP

NEMA LL 5­1999 Procedure for U­shaped Fluorescent Lamp Sample Preparation and the TCLP

NEMA LL 6­1999 Procedures for Integral Electronic Compact Fluorescent Lamp Sample Preparation and the TCLP

NEMA LL 7­2006 Generic Designation System for Pin­Based Compact Fluorescent and T5 Twin Fluorescent Lamps

NEMA LL 8­2010 Limits on Mercury Content in Self­Ballasted Compact Fluorescent Lamps

NEMA LL 9­2011 Dimming of T8 Fluorescent Lighting Systems

NEMA LS 1­1992 (R2000) Low­Voltage Surge­Protection (LVSP) Devices

NEMA LSD 10­2000 A Guide for the Safe Use of Remote Illumination Systems Equipment, Including a Glossary of Definitions

NEMA LSD 11­2010 White Paper on Outdoor Lighting Issues and Quality Lighting Applications

NEMA LSD 1­2003 (R2011) Tungsten Halogen (TH) Lamps (Bulbs) Ultraviolet, Rupture and High Temperature Risks

NEMA LSD 13­2001 Exit Sign Brightness for Visibility and Safety

NEMA LSD 14­2012 Guidelines on the Application of Dimming to High­Intensity Discharge Lamps

NEMA LSD 15­1993 (R2001) Radioactive Substances in Compact Fluorescent Lamps

NEMA LSD 17­1997 (R2001) Consumer Guide for 4­Ft Fluorescent Bulbs

NEMA LSD 18­2003 (R2012) Compatibility of Fluorescent Lamps and Electronic Ballasts in Frequently Switched Applications

NEMA LSD 21­2012 End­of­life Operation of Small Diameter (5/8 in. Diameter or Less) Pin­Based Fluorescent Lamps

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 14/21

NEMA LSD 2­2012 Wiring Requirements for T8 Lamps with Instant­Start Ballasts

NEMA LSD 22­2001 Demand Reduction and Energy Savings Using Occupancy Sensors

NEMA LSD 23­2010 Recommended Practice­Lamp Seasoning for Fluorescent Dimming Systems

NEMA LSD 24­2012 Marking of Luminaire Codes on Metal Halide Lamps

NEMA LSD 25­2008 Best Practices for Metal Halide Lighting Systems, Plus Questions and Answers about Lamp Ruptures in MetalHalide Lighting Systems

NEMA LSD 27­2012 Best Practices for Operating Fluorescent Lighting Systems

NEMA LSD 28­2014 Minimizing the Potential of Base Arcing Between Certain Wattage HID Lamps and Lampholders

NEMA LSD 29­2012 Incompatibility of T8 Ballasts (RS, PS, Dimming) and Shunted Bi­Pin Lampholders

NEMA LSD 2A­2007 Application Note Wiring Requirements for T8 Fluorescent Lamps with Instant­Start Ballasts

NEMA LSD 2B­1999 Application Note Wiring Requirements for 2G11 Based T5 Fluorescent Twin Lamps With Instant­Start Ballasts

NEMA LSD 31­2005 A Lighting Systems Division Information Bulletin Changes to the 2005 NEC Will Impact Future Metal HalideSystems Options

NEMA LSD 3­2012 Interaction of Infrared Controls and Electronic Compact Fluorescent Lamps

NEMA LSD 34­2012 Recommended Practices for T8 Rapid­Start Fluorescent Lamp Dimming (17 W, 25 W, 32 W and 40 W Lamps)

NEMA LSD 35­2012 ANSI Code Update to Include Letter C for Ceramic Metal Halide Lamps

NEMA LSD 37­2008 Effects of EPAct 2005 on Mercury Vapor (MV) Lamp Ballasts and Lighting Systems­Frequently Asked Questions

NEMA LSD 39­2012 Four­Pin Spiral Compact Fluorescent Lamp Systems Issues, Recommendations and Standardization

NEMA LSD 40­2014 Failure Modes for Self­Ballasted Compact Fluorescent Lamps (SBCFLs)­A NEMA Update

NEMA LSD 41­2012 UN2911 Labeling and Transportation of Lamps Containing Radioactive Substances

NEMA LSD 4­1999 Glossary of Terms Pertaining to Remote Illumination Systems

NEMA LSD 43­2008 Luminaire Ballast Disconnects

NEMA LSD 44­2009 Solid State Lighting­The Need for a New Generation of Sockets and Interconnects

NEMA LSD 45­2009 Recommendations for Solid State Lighting Sub­Assembly Interfaces for Luminaires

NEMA LSD 46­2009 Photoluminescent Exit Signage­Factual Review

NEMA LSD 48­2009 Lead in Household Lamps

NEMA LSD 49­2010 Solid State Lighting for Incandescent Replacement­Best Practices for Dimming

NEMA LSD 51­2009 Solid State Lighting­Definitions for Functional and Decorative Applications

NEMA LSD 5­2009 34 W Fluorescent Lamps and High­Frequency Electronic Ballasts

NEMA LSD 53­2010 Proposal for Digital Protocol for Lighting Control Devices

NEMA LSD 54­2010 The Strengths and Potentials of Metal Halide Lighting Systems

NEMA LSD 55­2010 Outdoor Lighting and Human/Animal Factors An Industry Opinion

NEMA LSD 56­2011 Compatibility of Forward Phase Control Dimmers and Dimmable Self­Ballasted Compact Fluorescent Lampsand Frequently Asked Questions Regarding CFLs and Dimming

NEMA LSD 57­2013 Polyurethane Foam Application: Lighting Equipment

NEMA LSD 58­2010 Air Infiltration Ratings for Recessed Luminaires

NEMA LSD 60­2012 The Effects of Dimming on Color and Efficacy of LED Lamps

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 15/21

NEMA LSD 61­2012 Fluorescent Dimming Standards Development Report

NEMA LSD 6­1999 Interaction of Infrared Controls and Fluorescent Lamp/Ballast Systems in Education Facilities

NEMA LSD 62­2012 Systems Approach for Lighting

NEMA LSD 63­2012 Measurement Methods and Performance Variation for Verification Testing of General Purpose Lamps andSystems

NEMA LSD 64­2014 Lighting Controls Terminology

NEMA LSD 65­2012 NEMA Guide to Emergency Lighting

NEMA LSD 66­2012 Understanding the New Fluorescent Ballast Rule EPCA 10 CFR 430

NEMA LSD 67­2013 Low Mercury Controllable Fluorescent Systems

NEMA LSD 68­2013 Remote Phosphor Devices Used in LED Lamps, Engines and Luminaires

NEMA LSD 70­2014 A Comparison of High Performance Luminaire Programs in the US Market

NEMA LSD 7­1999 (R2012) Ultraviolet Radiation (UV) from Fluorescent Lamps

NEMA LSD 8­1999 Compact Fluorescent Lamps in Residences­Power Quality Implications

NEMA LSD 9­2000 (R2011) Compatibility of Add­on Tube Guards with T8 Fluorescent Lamps Operating on High­Frequency ElectronicBallasts

NEMA LSD E11­2001 Fluorescent Lamps and the Environment

NEMA MG 10­2013 Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel­Cage PolyphaseInduction Motors

NEMA MG 11­1977 (R1997, R2001,R2007, R2012)

Energy Management Guide for Selection and Use of Single­Phase Motors

NEMA MG 1­2011 Condensed Information Guide for General Purpose Industrial AC Small and Medium Squirrel­Cage Induction MotorStandards

NEMA MG 1­2014 Motors and Generators

NEMA MG 2­2014 Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors andGenerators

NEMA MG 3­1974 (R1995, R2000,R2006, R2012)

Sound Level Prediction for Installed Rotating Electrical Machines

NEMA MGW 1­2013 The DOE Small Electric Motor Standards Final Rule and Technical Support Document of March 9, 2010

NEMA MS 10­2010 Determination of Local Specific Absorption Rate (SAR) in Diagnostic Magnetic Resonance Imaging (MRI)

NEMA MS 11­2010 Determination of Gradient­Induced Electric Fields in Diagnostic Magnetic Resonance Imaging

NEMA MS 1­2008 Determination of Signal­to­Noise Ratio (SNR) in Diagnostic Magnetic Resonance Imaging

NEMA MS 12­2010 Quantification and Mapping of Geometric Distortion for Special Applications

NEMA MS 2­2008 Determination of Two­Dimensional Geometric Distortion in Diagnostic Magnetic Resonance Images

NEMA MS 3­2008 Determination of Image Uniformity in Diagnostic Magnetic Resonance Images

NEMA MS 4­2010 Acoustic Noise Measurement Procedure for Diagnostic Magnetic Resonance Imaging (MRI) Devices

NEMA MS 5­2009 Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging

NEMA MS 6­2008 Determination of Signal­to­Noise Ratio and Image Uniformity for Single­Channel, Non­Volume Coils inDiagnostic Magnetic Resonance Imaging (MRI)

NEMA MS 7­1993 (Revision 1998) Measurement Procedure for Time Varying Gradient Fields (dB/dt) for Magnetic Resonance Imaging Systems

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 16/21

NEMA MS 8­2008 Characterization of the Specific Absorption Rate (SAR) for Magnetic Resonance Imaging Systems

NEMA MS 9­2008 Characterization of Phased Array Coils for Diagnostic Magnetic Resonance Images (MRI)

NEMA MW 700­1997 Test Procedures for Magnet Wire Plastic Spools/Reels

NEMA MW 750­2009 (R2014) Dynamic Coefficient of Friction of Film­Insulated Magnet Wire

NEMA MW 755­1996 Straight Flange Magnet Wire Plastic Spools/Reels

NEMA MW 760­1996 Tapered Flange Magnet Wire Plastic Spools/Reels

NEMA MW 765­2003 (R2008,R2013)

Reclaiming of Magnet Wire Packaging

NEMA MW 770­1997 (R1998) Unified Customer Labeling for Magnet Wire Products

NEMA MW 780­2005 (R2011) Returnable Packaging for 24x6 Magnet Wire Reels

NEMA MW 785­2000 (R2006,R2011)

Simulated Insertion Force Test for Film­Insulated Round Magnet Wire

NEMA MW 790­2000 AC Overload Test for Film Insulated Magnet Wire

NEMA MW 800­1996 Guidelines for Precautionary Labeling of Magnet Wire

NEMA NS 1­2005 Guide for Preparation of NEMA Standards Publications

NEMA NU 1­2012 Performance Measurements of Gamma Cameras

NEMA NU 2­2012 Performance Measurements of Positron Emission Tomographs (PETs)

NEMA NU 3­2004 Performance Measurements and Quality Control Guidelines for Non­Imaging Intraoperative Gamma Probes

NEMA NU 4­2008 Performance Measurements of Small Animal Positron Emission Tomographs (PETs)

NEMA OS 3­2012 Selection and Installation Guidelines for Electrical Outlet Boxes

NEMA PB 1.1­2002 (en Espanol) Instrucciones Generales para la Instalacion, Operacion y el Mantenimiento Correcto de Tableros de Alumbradoy Control Hasta 600 V Nominales o Menos

NEMA PB 1­2011 Panelboards

NEMA PB 2.1­2002 (en Espanol) Instrucciones Generales para el Manejo, Instalacion, Operacion y Mantenimiento Correcto de Tableros deDistribucion de Frente Muerto Hasta 600 V Nominales o Menos

NEMA PB 2.2­1999 (R2004, R2009) Application Guide for Ground­Fault Protective (GFP) Devices for Equipment

NEMA PB 2­2011 Deadfront Distribution Switchboards

NEMA PE 1­2012 Uninterruptible Power Systems (UPS)­Specification and Performance Verification

NEMA PE 5­1997 (R2003) Utility­Type Battery Chargers

NEMA PE 7­1997 (R2003) Communications­Type Battery Chargers

NEMA PRP 2­2009 Solvent­Cementing Joints for PVC Rigid Nonmetallic Conduit, Duct and Fittings

NEMA PRP 3­2009 Expansion Epoxy­Based Fittings for RTRC Rigid Nonmetallic Conduit

NEMA PRP 4­2009 Expansion Fittings for Polyvinyl Chloride (PVC) Rigid Nonmetallic Conduit

NEMA RE 2­1999 Electrical Insulating Varnish

NEMA RN 1­2005 (R2013) Polyvinyl Chloride (PVC) Externally Coated Galvanized Rigid Steel Conduit and Intermediate Metal Conduit

NEMA RN 2­1997 (R2009) Packaging of Master Bundles for Electrical Rigid Metal Conduit (ERMC)­Steel, Electrical Intermediate MetalConduit (EIMC)­Steel, and Electrical Metallic Tubing (EMT)­Steel

NEMA RN 3­1991 (R2002) Product Identification Numbers for Metallic Tubular Conduit Products for Use with Bar Coding and Electric Data

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 17/21

Interchange (EDI) Applications

NEMA RT 1­2014 Gating Interface

NEMA RV 1­2012 Application and Installation Guidelines for Armored Cable (AC) and Metal­Clad (MC) Cable

NEMA RV 2­2011 Application and Installation Guidelines for Nonmetallic­Sheathed (NM­B) Cable and Underground Feeder andBranch Circuit (UF­B) Cable

NEMA RV 3­2012 Application and Installation Guidelines for Flexible and Liquidtight Flexible Metal and Nonmetallic Conduits

NEMA RV 4­2012 Application Guidelines for Service­Entrance Cable

NEMA SB 10­1991 (R1998, R2005,R2010)

Audio Standard for Nurse Call Systems

NEMA SB 11­2011 Guide for Proper Use of System Smoke Detectors

NEMA SB 1­2014 Quality Informational Guide for Automatic Fire Detection and Alarm Systems

NEMA SB 13­2012 Guide for Proper Use of Smoke Detectors in Duct Applications

NEMA SB 19­(R2007) NEMA Installation Guide for Nurse Call Systems (R2007)

NEMA SB 2­2010 Training Manual on Fire Alarm Systems

NEMA SB 28­1992 (R1997, R2003) Product Safety Guide for Developing Documentation for Fire Alarm Systems and Equipment

NEMA SB 29­1994 Impact of Electrostatic Discharges in the Hospital Environment

NEMA SB 30­2005 Fire Service Annunciator and Interface

NEMA SB 3­1969 (R1989, R1994) Interconnection Circuitry of Noncoded Remote Station Protective Signaling Systems

NEMA SB 50­2014 Emergency Communications Audio Intelligibility Applications Guide

NEMA SB 7­2013 Applications Guide for Carbon Monoxide Alarms and Detectors

NEMA SBP 1­2010 Looking Ahead to UL 2560

NEMA SBP 2­2014 Multi­Criteria Detectors (MCD)

NEMA SBP 3­2013 The Changing Communications within Fire Alarm System Reporting

NEMA SG 10­2008 Guide to OSHA and NFPA 70E Safety Regulations when Servicing and Maintaining Medium VoltageSwitchgear and Circuit Breakers Rated Above 1,000 V

NEMA SG 11­2013 Guide for Handling and Maintenance of AC Outdoor High Voltage Circuit Breakers

NEMA SG 4­2009 (R2013) Alternating Current High Voltage Circuit Breakers

NEMA SG 5­1995 Power Switchgear Assemblies

NEMA SG 6­2000 Power Switching Equipment

NEMA SG­AMI 1­2009 Requirements for Smart Meter Upgradeability

NEMA SM 23­1991 (R1997, R2002) Steam Turbines for Mechanical Drive Service

NEMA SM 24­1991 (R1997, R2002) Land­Based Steam Turbine Generator Sets 0 to 33,000 kW

NEMA SSL 1­2010 Electronic Drivers for LED Devices, Arrays or Systems

NEMA SSL 3­2011 High­Power White LED Binning for General Illumination

NEMA SSL 4­2012 Retrofit Lamps­Minimum Performance Requirements

NEMA SSL 6­2010 Solid State Lighting for Incandescent Replacement­Dimming

NEMA SSL 7A­2013 Phase Cut Dimming for Solid State Lighting—Basic Compatibility

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 18/21

NEMA ST 20­2014 Dry Type Transformers for General Applications

NEMA TC 13­2005 Electrical Nonmetallic Tubing (ENT)

NEMA TC 14­2002 Reinforced Thermosetting Resin Conduit (RTRC) and Fittings

NEMA TC 18­2013 Packaging of Master Bundles for EPC­40 Polyvinyl Chloride (PVC) Conduit

NEMA TC 19­2001 (R2009) Nonmetallic Riser U­Type Guards

NEMA TC 2­2013 Electrical Polyvinyl Chloride (PVC) Tubing and Conduit

NEMA TC 3­2013 Polyvinyl Chloride (PVC) Fittings for Use with Rigid PVC Conduit and Tubing

NEMA TC 6 & 8­2013 Polyvinyl Chloride (PVC) Plastic Utilities for Underground Installations

NEMA TC 7­2013 Smooth Wall Coilable Electrical Polyethylene Conduit

NEMA TC 9­2004 (R2012) Fittings for Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground Installation

NEMA TCB 2­2012 NEMA Guidelines for the Selection and Installation of Underground Nonmetallic Duct

NEMA TCB 3­2001 (R2009) User's Manual for the Installation of Underground Corrugated Coilable Plastic Utility Duct (CCD)

NEMA TF 1­1993 (R2000, R2005) Coated Electrical Sleeving

NEMA TF 2­1993 (R2000, R2005) Uncoated Treated Fiberglass Sleeving

NEMA TP 1­2002 Guide for Determining Energy Efficiency for Distribution Transformers

NEMA TP 2­2005 Standard Test Method for Measuring the Energy Consumption of Distribution Transformers

NEMA TP 3­2000 Standard for the Labeling of Distribution Transformer Efficiency

NEMA TR 1­2013 Transformers, Regulators and Reactors

NEMA TS 1­1989 (R1994, R2000,R2005)

Traffic Control Systems (Not Recommended for New Designs)

NEMA TS 2­2003 (R2008) Traffic Controller Assemblies with NTCIP Requirements­Version 02.06

NEMA TS 2­2003, Amendment 3 Contactor Amendment

NEMA TS 2­2003, Amendment 4 Flashing Yellow Arrow (FYA) Amendment

NEMA TS 4­2005 Hardware Standards for Dynamic Message Signs (DMS) with NTCIP Requirements

NEMA UC 2­1993 (R2000, R2005,R2010)

Undercarpet Power Distribution Systems

NEMA UD 2­2004 (R2009) Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment, Revision 3

NEMA UD 3­2004 (R2009) Standard for Real­Time Display of Thermal and Mechanical Acoustic Output Indices on Diagnostic UltrasoundEquipment, Revision 2

NEMA VE 1­2009 Metal Cable Tray Systems

NEMA VE 2­2013 Cable Tray Installation Guidelines

NEMA WC 26/EEMAC 201­2008 Binational Wire and Cable Packaging Standard

NEMA WC 50­1976/ICEA P­53­426Second Edition (R1993, R1999)

Ampacities, Including Effect of Shield Losses for Single­Conductor Solid Dielectric Power Cable 15 kV through69 kV

NEMA WC 52­2005 High­Temperature and Electronic Insulated Wire, Impulse Dielectric Testing

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 19/21

NEMA WC 56­1986 (R1993,R2000, R2005, R2012)

3.0 kHz Insulation Continuity Proof Testing of Wire and Cable

NEMA WC 58­2008/ICEA S­75­381 Portable and Power Feeder Cables for Use in Mines and Similar Applications

NEMA WC 60.2­1994 (R1999) Product Identification and Bar Coding Requirements for Building Wire Products

NEMA WC 62­1992 (R1999,R2004)

Repeated Spark/Impulse Dielectric Testing

NEMA WC 63.1­2005 Performance Standard for Twisted Pair Premise Voice and Data Communications Cables

NEMA WC 65­1995 (R2003) A Reasoned Approach to Solving Solderability Problems with Tin­Coated and Nickel­Coated StrandedConductors in High­Performance Wire and Cable Applications

NEMA WC 72­1999 (R2004) Continuity of Coating Testing for Electrical Conductors

NEMA WC 73­2000 (R2005,R2012)

Wire Selection Guidelines for Wires Rated at 200° to 450°C

NEMA WD 1­1999 (R2005, R2010) General Color Requirements for Wiring Devices

NEMA WD 7­2011 Occupancy Motion Sensors Standard

NEMA WD 8­2013 Guidelines for Electrical Wiring Device Replacement

NEMA WD 9­2013 Dimmers, Photoelectric Controls, Presence Sensors, and Multi­outlet Bars Energy Consumption Testing andLabeling

NEMA XR 10­1986 (R1992, R1998,R2003)

Measurement of the Maximum Symmetrical Radiation Field from a Rotating Anode X­Ray Tube Used forMedical Diagnosis

NEMA XR 11­1993 (R1999) Test Standard for the Determination of the Limiting Spatial Resolution of X­Ray Image Intensifier Systems

NEMA XR 13­1990 (R1995, R2000) Mechanical Safety Standard for Power Driven Motions of Electromedical Equipment

NEMA XR 14­1990 (R1995, R2000) Recommended Practices for Load­Bearing Mechanical Assemblies Used in Diagnostic Imaging

NEMA XR 15­1991 (R1996, R2001) Test Standard for the Determination of the Visible Entrance Field Size of an X­Ray Image Intensifier (XRII)System

NEMA XR 16­1991 (R1996, R2001) Test Standard for the Determination of the System Contrast Ratio (SCR) and the System Veiling Glare Index(SVGI) of an X­Ray Image Intensifier (XRII) System

NEMA XR 17­1993 (R1999) Test Standard for the Measurement of the Image Signal Uniformity of an X­Ray Image Intensifier (XRII) System

NEMA XR 18­1993 (R1999) Test Standard for the Determination of the Radial Image Distortion of an X­Ray Image Intensifier (XRII) System

NEMA XR 19­1993 (R1999) Electrical, Thermal and Loading Characteristics of X­Ray Tubes Used for Medical Diagnosis

NEMA XR 21­2000 Characteristics of and Test Procedures for a Phantom to Benchmark Cardiac Fluoroscopic and PhotographicPerformance

NEMA XR 22­2006 Quality Control Manual Template for Manufacturers of Displays and Workstations Labeled for FinalInterpretation in Full­Field Digital Mammography (FFDM)

NEMA XR 23­2006 Quality Control Manual Template for Manufacturers of Hardcopy Output Devices Labeled for Final Interpretationin Full­Field Digital Mammography (FFDM)

NEMA XR 24­2008 (R2014) Primary User Controls for Interventional Angiography X­Ray Equipment

NEMA XR 25­2010 Computed Tomography Dose Check

NEMA XR 26­2012 Access Controls for Computed Tomography—Identification, Interlocks, and Logs

NEMA XR 27­2013 withAmendment 1

X­ray Equipment for Interventional Procedures User Quality Control Mode

NEMA XR 28­2013 Supplemental Requirements for User Information and System Function Related to Dose in CT

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 20/21

NEMA XR 29­2013 Standard Attributes on CT Equipment Related to Dose Optimization and Management

NEMA XR 5­1992 (R1999) Measurement of Dimensions and Properties of Focal Spots of Diagnostic X­Ray Tubes

NEMA XR 7­1995 (R2000) High Voltage X­Ray Cable Assemblies and Receptacles

NEMA XR 9­1984 (R1994, R2000) Power Supply Guidelines for X­Ray Machines

NTCIP 1101:1996 Simple Transportation Management Framework

NTCIP 1102:2004 Octet Encoding Rules (OER) Base Protocol

NTCIP 1103 v02 Transportation Management Protocols (TMP)

NTCIP 1104 v01 Center­to­Center Naming Convention Specification

NTCIP 1201 v03 Global Object (GO) Definitions

NTCIP 1202:2005 Object Definitions for Actuated Traffic Signal Controller (ASC) Units­Version 02

NTCIP 1203 v03 Object Definitions for Dynamic Message Signs (DMS)

NTCIP 1204 v03 Environmental Sensor Station (ESS) Interface Protocol

NTCIP 1205:2001 Object Definitions for Closed­Circuit Television (CCTV) Camera Control

NTCIP 1206:2005 Object Definitions for Data Collection and Monitoring (DCM) Devices

NTCIP 1207 v02 Object Definitions for Ramp Meter Control (RMC) Units

NTCIP 1208:2005 Object Definitions for Closed­Circuit Television (CCTV) Switching

NTCIP 1209 v02 Object Definitions for Transportation Sensor Systems (TSS)

NTCIP 1210 v01 Field Management Stations (FMS)—Part 1: Object Definitions for Signal System Masters (SSM)

NTCIP 1211 v02 Object Definitions for Signal Control and Prioritization (SCP)

NTCIP 1213 v02 Object Definitions for Electrical and Lighting Management Systems (ELMS)

NTCIP 1400:2000 TCIP Framework Standard

NTCIP 1401:2000 Standard on Common Public Transportation (CPT) Objects

NTCIP 1402:2000 Standard on Incident Management (IM) Objects

NTCIP 1403:2000 Standard on Passenger Information (PI) Objects

NTCIP 1404:2000 Standard on Scheduling/Runcutting (SCH) Objects

NTCIP 1405:2000 Standard on Spatial Representation (SP) Objects

NTCIP 1406:2000 Standard on On­Board (OB) Objects

NTCIP 1407:2000 Standard on Control Center (CC) Objects

NTCIP 1408:2001 Standard on Fare Collection (FC) Business Area Objects

NTCIP 2001:1996 National Transportation Communications For ITS Protocol­Class B Profile

NTCIP 2101:2001 Point to Multi­Point Protocol Using RS­232 Subnetwork Profile

NTCIP 2102:2003 Point to Multi­Point Protocol Using FSK Modem Subnetwork Profile

NTCIP 2103 v02 Point­to­Point Protocol over RS­232 Subnetwork Profile

NTCIP 2104:2003 Ethernet Subnetwork Profile

NTCIP 2201:2003 Transportation Transport Profile

18/12/2014 All Standards (One Page) ­ NEMA

http://www.nema.org/Standards/Pages/All­Standards­One­Page.aspx 21/21

NTCIP 2202:2001 Internet (TCP/IP and UDP/IP) Transport Profile

NTCIP 2301 v02 Simple Transportation Management Framework (STMF) Application Profile (AP) (AP­STMF)

NTCIP 2302:2001 Trivial File Transfer Protocol Application Profile

NTCIP 2303:2001 File Transfer Protocol Application Profile

NTCIP 2304:2002 Application Profile for DATEX­ASN (AP­DATEX)

NTCIP 2306 v01 Application Profile for XML Message Encoding and Transport in ITS Center­to­Center Communications

NTCIP 8003:2001 Profile Framework

NTCIP 8004 v02 Structure and Identification of Management Information (SMI)

NTCIP 8005 v01 Procedures for Creating Management Information Base (MIB) Files

NTCIP 8007 v01 Testing and Conformity Assessment Documentation within NTCIP Standards Publications

NTCIP 9001 v04 The NTCIP Guide

PP 1­1986 (R1996) Procedure for Evaluating Ground Fault Circuit Interrupters for Response to Conducted Radio Frequency Energy

PS 3.13­2001 Digital Imaging and Communications in Medicine (DICOM) Part 13 Print Management Point­to­PointCommunication Support

PS 3.9­2000 Digital Imaging and Communications in Medicine (DICOM) Part 9 Point to Point Communication Support forMessage Exchange

ST 1­1988 (R1994, R1997) Specialty Transformers (Except General Purpose Type)

TTGR­N The Grounding System That Works­Steel Conduit (Electrical Metallic Tubing, Intermediate Metal Conduit andGalvanized Rigid)

WC 2­1980 (R1991, R1998)/ICEAS­67­401 5th Edition

Steel Armor and Associated Coverings for Impregnated Paper Insulated Cables (ICEA S­67­401 Fifth Edition)

WC 3­1992 Rubber­Insulated Wire & Cable for the Transmission & Distribution of Electrical Energy

WC 4­1988/ICEA S­65­375 3rd Ed.(R1993)

Varnished Cloth Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy

WC 5­1992 Thermoplastic­Insulated Wire & Cable for the Transmission & Distribution of Electrical Energy

WC 60.1­1995 Bar Coding and Control Wire and Cable Products

WC 7­1988 Cross­Linked­Thermosetting­Polyethylene­Insulated Wire & Cable for the Transmission & Distribution of ElectricEnegy

WC 8­1988 Ethylene­Propylene­Rubber­Insulated Wire & Cable for the Transmission & Distribution of Electrical Energy