Aktionsblatt-Q2-web oP EN

Tel.: +44 1335 368010 • www.pichler-tools.com • [email protected]

Promotion 2013 - 2

Pichler Tools Ltd. Ednaston Business Centre Hollington Lane · Ednaston Ashbourne GB-DE6 [email protected]

9038100

9038010 9038011

9038000

9038020 9038030

For optimal cleaning and revision of the injector shaft. Consisting of 5 modules:

Module 1.1 - Brushes Plus• 8 injector sealing seat fleece brushes

(19 and 25 mm, coarse and fine)• 1 fleece brushes holder• 5 steel wire brushes for cleaning the

injector shaft (18, 19, 21, 24 and 26 mm)• 1 pipe brush

Module 1, 1.1, 2 & 3including Basic Module

Case empty with burl foam material

Module 1 - Brushes• 5 steel wire brushes for cleaning the

injector shaft (18, 19, 21, 24 and 26 mm)• Brush holder & flexible bit holder ¼“• 1 pipe brush• 2 end brush steel (Ø 17 mm) &

plastic guide• Setting tool and sealing plugs 8 & 10 mm

Module 2 - MillingIn case the sealing seat is severe contaminated or damaged, then can be reworked with the milling tool, precisely and under controlled conditions, so that again a perfect sealing surface is formed.• 3 sealing seat milling cutters• basic device with 3 cones and depth stop• cutting grease• allen key

Module 3 - AccessoriesSealing Ring Extractor. For extracting the frozen copper sealing rings from the injector shaft, without damaging the cylinder head. Including 1.35 kg slide hammer and flexible lamp.

Foto

: „le

af“ i

van

kmit

© fo

tolia

.com

Injector Shaft Cleaning Kit UNI

NEW!

Module 1*

Basic Module

Module 1.1*

Module 2* Module 3*

* without Basic Module


6092960

60920000 60918900

60917050

60915800

90417900

9235300

60822000 61135500 9094055

Oil Pressure Test Kit

Tester to check the oil pressure of internal combustion engines.

• Dual scale 0...10 bar / 0...140 psi• More adapters are available

Inclusive 10 adapter:• ANK 4 M 10 x 1,0 Audi, VW, BMW, Alfa Romeo,

MB, Porsche • ANK 40 M 18 x 1,5 Peugeot, Renault, Volvo• ANK 18 M 12 x 1,5 Autobianchi, BMW, Citroen, Fiat• ANK 19 M 14 x 1,5 Alfa Romeo, DAF, MB,

Fiat, Lancia, Opel, Renault, Volvo• ANK 62 ⅜“ x 24 UNF Ford, Jaguar, Rover• ANK 20 ⅛“ x 27 NPTF Chrysler, Ford, Mazda, Volvo• ANK 39 ¼“ x 27 NPTF Alfa Romeo, Ford, Saab, Volvo• ANK 47 ⅛“ x 28 BSP Honda, Mazda,

Nissan, Opel, Toyota• ANK 63 ½“ x 20 UNF Pontiac• ANK 53 M16 x 1,5 Citroen, Peugeot, Renault

Universal Compression Test Adapter Set M8x1, M9x1, M10x1, M10x1.25 Suitable Adapters Universal tool for the compression check through the glow plug bore. Connector for test equipment: M12x1.5

• Versatile by combining guides, sealing cones and adapters

Pneumatic Impact Wrench ⅜“ „Butterfly“

• Light and handy• Torque max. 102 Nm• Turnable compressed air connection• 8 setting steps• Idle speed 9000 rpm

Particularly suitable for working in the engine compartment

• With the suitable adapters usable for several compression testers

• M12x1.5 to NW 5

• M12x1.5 to Euro coupling

• M12x1.5 to BSP ¼“

Engine PositionerIs used during the mounting of the engine in the engine compartment. The engine positioner allows a precise positioning of the engine.• Lifting capacity: 250 kg

Universal Engine and Gearbox SupportUser-friendly engine- and gearbox support, which is a „Universal Tool“ that does not work with a base unit and various extensions, but as one unit with a jack.

Digital Infrared ThermometerUniversal non-contact thermometer. With two laser points to a single spot when the unit is at the optimal distance from the target.

• Ideal for exhaust system, air-conditioning, cylinder temperature, brake temperature, cooling system temperature.

• Automatic measurement memory• Temperature range : -50°C to 1000°C

TOP

BESTSELLER

ACTION


41008070 60452300

60483300

60995100

90384865

90417900 90417910 90417920

Relay Tester 4 & 5 PinsFast and sure function testing of 4 and 5 pin relays

• The relay is tested repeatedly• Operating directly on the car battery• LED function display (red / green)

Suitable for 4 and 5 pin relays (non-inverted pins)

Relay Pliers Set 2 pcsFor easily installing and removing relays, even of smaller design.

• Jaws made of special steel• Straight version for linear removal

and plugging of relays• Jaws angled 60° for removal and replacement of

relays in confined spaces

Alternator Bit Socket Set 24 pcsFor removal & installation of the freewheeling pulley, e.g. when changing the pulley or alternator

Suitable for: Audi, VW, BMW, Fiat, Ford, Porsche, Opel, MB, Renault, Seat, Skoda, Toyota

Multimeter Pro For Hybrid Vehicles CAT III - 20A

Especially designed multi-meter for automotive work.

• 14 Functions including DCV, ACV, DCA, ACA, Resistance, RPM (Tach), Frequency, Dwell angle, Duty cycle, Temperature (IR Temperature) (ºC/ºF), Capacitance, Continuity and Diode Check

Extraction Bracket for Denso InjectorsFor removing the injector with a slide hammer M18x1.5

• 3-piece • with illustrated instructions

UNI

Universal Glow Plug Elements Removal SetEasily removing broken CDI glow plug tips / heating elements.

• For all common sizes glow plugsSuited for: universal, glow plug M8x1, M9x1, M10x1 and M10x1.25

PSA / DV6 / DLD 416• M8x1 und M10x1

Suited for: PSA e.g. Ford, BMW-Mini, Mazda, Volvo

TOYOTA• M10x1,25

Engine code: 1CD-FTV

• Eliminates removing the cylinder head

• Thorough cleaning of the glow plug bore

Recommended slide hammer 8 kg, 6148800

• Ideal for exhaust system, air-conditioning, cylinder temperature, brake temperature, cooling system temperature.

• Automatic measurement memory• Temperature range : -50°C to 1000°C

ACTIONBESTSELLER

BESTSELLER

Only while stocks last!


++

6149560

6158800

9146900

61495700

61769500

9065000 91469475

40600300

80305000

79416810

99705100

• Rotation speed max.1500 rpm• Low dust production• No flying sparks• Perfect finish

Support Plate S

Wheel Bearing Changing Starter Kit

For work on the shop press, e.g. of transmissions, axles, etc.. For very limited space. Special steel, very slim design.

Universal wheel bearing replacement kit with combined hub/axle shaft press clamp. The wheel bearing is repla-ced directly on the car with minimum work.

• 170 x 280, 4 mm• Opening max. 69 mm, min. 29 mm

Universal

• Neither ABS-sensor, wheel spindle, spring strut nor steering linkage needs to be dismounted.

• Without hydraulics

Wheel Hub GrinderFor cleaning and rust removal of wheel centering and the contact surface.

Ø 200 mm with 2 Cleaning Discs

Ø 160 mmwith 3 Cleaning Discs

Press and Pull Sleeve Set IIUniversal set of tools for removing and pulling in e.g. bushes, hydraulic bearings, bushings, bearings and oil seals.

• Reliable and uniform actuation

Suited for: SUV / off-road vehicles e.g. BMW X3, X5, X6, MB M-class, Porsche Cayenne, VW Touareg and commercial vehicles

Application picture

Universal Puller for pressing the ball joint stud from the steering arm in trucks and buses, as well as stub axles for transportation vehicles.

• Is especially suited for releasing ball joint connections on axle and steering systems

• High durability and safety

• for use with hydraulic cylinder 8,5 ton

Steering Joint Puller

Application picture

Universal Compact Wheel Bearing Mounting ToolUniversal tool for mounting the new type of compact wheel bearings, with or without locking ring.

• Including 3 holding plates and mounting ring for different vehicle types

• Without hydraulics

Tire Changing Promotion Package

• max. torque 1600 Nm at 6,2 bar

Impact gun ½“

Torque wrench up to 210Nm• With reversible ratchet, fine-toothed• Accuracy ±3%• Drive ½“

Impact socket set ½“ 3 pc• Specifically for removing or mounting wheels• Hexagon 17, 19 & 21 mm• For use with a impact gun• Protective plastic sleeve for working on

aluminium rims without causing damage

A

A

B

C

B

C

ACTION

ACTION

ACTION

NEWSpecial reduced price


ACTION


9159850

61486855 61631000

80255550 80255551

90251260

90251270

90251240

Completely new, unique hydraulic spring compressor with a wide range of applications

Hydraulic Spring Compressor with Hydraulic Foot Pump including 4 Spring Plates Ø 70 - 160 mm

Hub Puller Commercial VehiclesKingpin ToolUniversal kit for replacing the Kingpin

The tool is flexible and fits heavy trucks/busses with 8 bolt 275 mm and 10 bolt 335 mm. The robust design allows to combine the full power of 32 ton with punching with a hammer during pressing out the hub.

• Is used together with a 32-ton hydraulic cylinder with impact function

• No removal of the shaft required• Easy to use• It is also suitable for buses

• Is used together with a 32 ton impact resistend hydraulic cylinder

Pneumatic Hydraulic Foot Pump Pneumatic Hose Kit with Air GunPneumatically driven hydraulic pump (700 bar)

for use with hydraulic cylinders Hose kit which on 80255550 is mounted so that an air gun can be attached on the hydraulic hose for pulling back of the hydraulic cylinder.

• Oil tank capacity: 1.4 litres• 2.2 m hose• Drip-free quick coupling

Hydraulic Cylinder

32 ton

22 ton

8,5 ton

Press and pull hydraulic cylinder. The cylinder´s hydraulic pressure can be combined with impact force when using the punching socket.

Designed for everyday use in auto repair shops.

• Lifting capacity: 22 ton• Stroke length: 70 mm• Weight: 4,7 kg

• Lifting capacity: 8,5 ton• Stroke length: 25 mm• Weight: 1,8 kg

• Lifting capacity: 32 ton• Stroke length: 113 mm• Weight: 8,3 kg

• Can be used with almost all passenger cars and light transport vehicles at the front and rear

• No additional claws or arms needed• Can also be used for relieving the

suspension strut• Big timesaver

ACTION

Quality

ACTION

ACTION

TOP


9122010 9125600

61203700 61203730 61207600

10609030 10609032 10609039 10609035

Drain Plug Key Set 17 pcsEquipped with triangular-, square-, hexagonal-and spline sockets. Drive ⅜“

Drain Plug Thread Repair Kit M13, M15, M17 & M20

Universal repair kit to fit oversize drain plugs in damaged oil pans.

• With thread-cutting tools and seals• Plug sizes M13, M15, M17 and M20

Oil Filter Wrench

Petrol: 60 – 80 mmDiesel: 80 – 110 mm

• Leftward orientated teeth for reliable release• Can also be used with a damaged sheet metal hex• Flexibly adjusted

Universal, Commercial vehicles104 – 150 mm

Commercial vehicle 104 – 150 mm

Oil Filter Wrench Ford DW enginesSimple and time-saving removing and installing of the, because of diesel particulate filter system, difficult to reach filter housing

Suited for: Ford C-Max (from 04/’10), Focus (from 07/’10), Galaxy (from 03/’06), Kuga (from 02/’08), Mondeo (from 02/’07), S-Max (from 03/’06), 2.0L Duratorq-TDCi (DW10C) Diesel, 2.2L Duratorq-TDCi (DW12C) Diesel

application picture

Reliable, time-saving removal

Vibro 30

Ball Joint RemoverParticularly robust, compact, solid impact resistant ball joint remover.

Fork opening: 30 mmClear height: 50 mmClear width: 55 mmSuited for: ball joints on steering and push rods in vans

Vibro 32Fork opening: 32 mmClear height: 80 mmClear width: 70 mmSuited for: ball joints on steering and push rods in vans

Vibro 39Vibro 35Fork opening: 39 mmClear height: 80 mmClear width: 70 mmSuited for: ball joints on steering and push rods in trucks e.g. MB Actros II & 1424

Fork opening: 35 mmClear height: 60 mmClear width: 95 mmSuited for: e.g. MB Sprinter & VW LT

Universal, Set 2 pieces

ACTION

ACTION


6043500 40122000

74163000 7315600

9130010 61377200

20400600 to 20420000

For safe drilling of broken off studs with thread sizes M6 - M10

Thread Repair KitFor improving the strength of threads in materials with low shearing strength, e.g. aluminium and magnesium alloys and for thread repair of damaged or worn threads

• Including 110 thread inserts• Narrow and exact tolerances• Optimizing the thread properties• Reject recovery

Universal Drill Guide

• Guide rails enable accurate centering of the drill guide• Including short positioning rail for limited work spaces

Passage Socket Set Extra Long/Deep

• For hard to reach nuts and bolts• SW: hex 8, 10, 11, 12, 13 & 14• ⅜“ -Drive

Bolt Twister size 2 – 10Sockets of high-strength special steel with a self locking, conical special profile. For removing screws with damaged Allen and XZN profiles

• ⅜“ -Drive • Size 2 for M5 • Size 3 for M6• Size 4 for M8

Twist-Sockets Size 1Sockets of high-strength special steel with a self locking special profile. For releasing of bolts, nuts, wheel locks and Allen screws whose drive profiles are damaged, e.g. overwound hexagonal profiles.

• 10 - 19 mm• ⅜“-Drive

• Size 6 for M10 - M12• Size 8 for M14 - M16• Size 10 for M18 - M20

Twist Socket Set LongQuick and sure release of defective screws. The innovative spiral profile gripes deep during an anticlockwise use into the screw head and makes an unscrewing possible.

• ½“-Drive • Sizes: 17, 19, 21 & 22 mm

Spiral Drill HSS Extra Long Precision GroundIndustrial quality for drilling alloyed and unalloyed steels, cast iron, malleable iron, copper alloys, silver, graphite and sintered iron

• Long version - DIN 340 RN• Special grinding: No centre punch required,

less feeding pressure required

Available in sizes from Ø 0.6 mm to Ø 20 mm

Precise and spot-drilling

Suited for: e.g. MB E-Class W212, rear bumper removal, C-class W204, front door hinge, A-pillar inside

• High-quality high-speed steel• Precise and spot-drilling

0,6 1,0 2,0 3,0 4,0 5,0 6,0 7,0 8,0 9,0 10,0 15,0 20,00,7 1,1 2,1 3,1 4,1 5,1 6,1 7,1 8,1 9,1 10,2 15,5

0,8 1,2 2,2 3,2 4,2 5,2 6,2 7,2 8,2 9,2 10,5 16,01,3 2,3 3,3 4,3 5,3 6,3 7,3 8,3 9,3 11,0 16,5

1,4 2,4 3,4 4,4 5,4 6,4 7,4 8,4 9,4 11,5 17,01,5 2,5 3,5 4,5 5,5 6,5 7,5 8,5 9,5 12,0 17,5

1,6 2,6 3,6 4,6 5,6 6,6 7,6 8,6 9,6 12,5 18,01,7 2,7 3,7 4,7 5,7 6,7 7,7 8,7 9,7 13,0 18,5

1,8 2,8 3,8 4,8 5,8 6,8 7,8 8,8 9,8 13,5 19,01,9 2,9 3,9 4,9 5,9 6,9 7,9 8,9 9,9 14,0 19,5

BESTSELLER

ACTION

Special reduced price


E&OE. Only while stocks last.


9139410

9353010

61347660

9227000

9495020

6810000

9110150

80118500 80122200

9139420

Valve Coupling for Tire Inflation

• Self-sealing and self-locking• Max. Operating pressure: 15 bar• Quickly and easily filling or venting• One-hand operation without force

Brake Calliper Bleeder Valve Repair SetFor drilling out and replacing torn bleeder valves.

Suited for: universal e.g. Audi, VW, Opel brake callipers

Protective Cap Puller PliersFast and damage-free removal of plastic wheel bolt caps.

• Extra slim gripper arms for t ight wheel bolt shafts

Universal

Clamp Locking PliersFor clamping hoses, without these being damaged. A valuable help with the repair of motor-vehicle brake systems and cooling systems.

• Firm grip on small objects

Ozone Maker for DisinfectionThe effect of ozone is used for removing mould, bacteria and dust mites from the vehicle interior.

• For car preparation• Eliminates bad odours• Disinfects

Storage TableA folding tray table made of galvanized iron for e.g. body parts and the like.

• Height adjustable• Space-saving storage• Weight: 11 kg

Scraper and Chisel Set 4-piece

This tool set can be used both as a scraper and as a chisel.

• Ideal for removing stickers, stickers, adhesive residues, seals, etc.

• For cutting and chiselling of sheet metal and even welding points

Dosage Hand Pump 1000 mlFor controlled extracting and filling of liquids

• Exact dosage because of the easy to read scale• Universal useable

Plastic Hose 300 mmFor Dosage Hand Pump

Manual Tire Inflator with Valve CouplingErmöglicht das Prüfen des Reifendruckes und das Befüllen des Reifens.

• Handy grip with 2-stage inlet lever allows for optimal handling• Gauge 0 - 10 bar/145 psi, Ø 80 mm with protective rubber cap

TOP QUALITY

ACTION

BESTSELLER

ACTION

ACTION

Aktionsblatt-Q2-web oP EN

Documents

Transcript of Aktionsblatt-Q2-web oP EN