Affordable, production UV LED printer€¦ · Ionizer kit OPT-J0322 Static eliminator kit Vacuum...
2
The world imagines... Mimaki delivers IP INDUSTRIAL PRODUCTS Affordable, production UV LED printer ... Speci cations Supplies • Some of the samples in this folder are arti cial renderings • Speci cations, design and dimensions stated in this folder may be subject to change without notice (for technical improvements, etc.) t n e m e c a l p e r r e t f a y r a v y a m s r u o l o c o s , s t o d e n e m e r t x e g n i s u t n i r p s r e t n i r p t e j k n I • s n o i t a r o p r o c e v i t c e p s e r e h t f o k r a m e d a r t e h t e r a r e d l o f s i h t n o n e t t i r w s e m a n e s i d n a h c r e m d n a e t a r o p r o c e h T • of the printing heads, also note that if using multiple printer units, colours could vary slightly from one unit to other unit due to slight individual differences • Compositor’s errors reserved Item JFX200-2513 Head Staggered array of 2 heads Print resolution 300, 450, 600, 900, 1,200dpi Ink Type UV curable ink: LUS-150 (C, M, Y, K, W) UV curable ink: LH-100 (C, M, Y, K, W, CI) Ink supply system Supplied from 1-litre bottles for each colour Ink circulation system* 1 White ink circulation using Mimaki Circulation Technology (MCT) Maximum media size 2,500 × 1,300mm Media Dimensions (W×D) 2,500 × 1,300mm Height 50mm Weight 50 kg/m 2 non concentrated load Media absorption Absorption xed through use of a vacuum Number of vacuum zones 2 partitions (X-axis direction) Range accuracy Absolute accuracy ±0.3mm or ±0.3% of the speci ed range, whichever is larger Reproducibility ±0.2mm or ±0.1% of the speci ed range, whichever is larger UV device LED-UV system Standard service life* 2 Over 5,000 hours Interface USB2.0 Safety standard VCCI class A, CE Marking, CB Report, UL (U.S. safety organization), RoHS directive, UL 60950-1, FCC class A Input power supply Single phase, 200 V AC-240 V AC, 50Hz/60Hz, up to 15A Power consumption Up to 3.6kVA Installation environment Temperature 15°C-30°C Relative humidity 35%-65% RH Accuracy maintained temperature 18°C-25°C Temperature gradient Up to ±10°C/h Dust Similar to standard of ce environments Dimensions (W×D×H) 4,400×2,450×1,250mm Weight 630kg Item Colour Item No. Remarks LUS-150 Cyan LUS15-C-BA Volume per bottle: 1 Litre Magenta LUS15-M-BA Yellow LUS15-Y-BA Black LUS15-K-BA White LUS15-W-BA LH-100 Cyan LH100-C-BA Magenta LH100-M-BA Yellow LH100-Y-BA Black LH100-K-BA White LH100-W-BA Clear LH100-CL-BA Tungsten replacement needle for ionizer SPA-0208 4 pcs Air lter kit SPA-0209 10 sets . s e l t t o b e r t i L 1 n i d l o s e r a r e m i r p t e j k n i d n a k n I • • LUS-150 inks can be used in combination with LH-100 Clear ink. f o e r u t x e t e h t n o g n i d n e p e d r e f f i d y a m k n i 0 5 1 - S U L y b d e t i b i h x e y t i l i b i x e f o t n u o m a e h T • the print media used. • Try out the ink on a test page before proceeding with a full print job. . d e z i l i t u e b o t r e t n i r p e h t f o s e i t i l i b a p a c d e e p s l l u f e h t w o l l a t o n y a m 0 0 1 - H L h t i w g n i t n i r P • Options n o i t c u s h g u o n e e v a h t o n s e o d r e t n i r p e h t h t i w d e i l p p u s s e m o c t a h t t i n u m u u c a v e h t f I • power, please purchase a different vacuum unit with optional settings. t c e n n o c o t d e d e e n s i y l e t a r a p e s d l o s ) 0 3 3 0 J - T P O ( t i k r o t c e n n o c r e w o l b l a n o i t p o e h T • a vacuum unit with optional settings to the JFX200-2513. e h t r o f t a h t m o r f e t a r a p e s e n i l y l p p u s r e w o p n w o r i e h t e r i u q e r o s l a s t i n u m u u c a V • printer itself. Item Item No. Remarks Ionizer kit OPT-J0322 Static eliminator kit Vacuum unit (φ 1mm x 200mm) OPT-J0217 Single-phase, 200V-240V, 30A, 1.9kW Optional blower connector kit OPT-J0330 *1 MCT works only with white ink. *2 The standard service life times listed are estimates and do not guarantee the operation. Sophisticated RIP Software maximizes the performance of JFX200-2513 Web update function is supported: This facility enables easy program updates and pro le downloading to be performed via the internet. Intuitive and user-friendly operation 1. Easy to follow icons enable intuitive and user-friendly operation 2. Related settings feature in one window to simplify RIP operations with ‘Register as Favourite’ option available for regularly used layouts 3. Printing progress can be monitored on the main screen 1 RUE DE LA HAYE - LE DÔME 1 - ROISSYPÔLE - 93290 TREMBLAY EN FRANCE TÉL. 01 78 78 72 50 - FAX 01 78 78 72 51 TÉL. 04 97 02 25 25 - FAX 04 97 02 25 20 GREEN TECH BÂT. 1 - 549, BD PIERRE SAUVAIGO - 06480 LA COLLE-SUR-LOUP [email protected] www.s2idigital.com www.s2istore.com
Transcript of Affordable, production UV LED printer€¦ · Ionizer kit OPT-J0322 Static eliminator kit Vacuum...
The world imagines... Mimaki delivers
SGSIGN &
GRAPHICS
IPINDUSTRIALPRODUCTS
TEXTILE &APPAREL
TA
Affordable, production UV LED printer...
Speci cations Supplies
• Some of the samples in this folder are arti cial renderings • Speci cations, design and dimensions stated in this folder may be subject to change without notice (for technical improvements, etc.) tnemecalper retfa yrav yam sruoloc os ,stod en emertxe gnisu tnirp sretnirp tejknI • snoitaroproc evitcepser eht fo kramedart eht era redlof siht no nettirw seman esidnahcrem dna etaroproc ehT •
of the printing heads, also note that if using multiple printer units, colours could vary slightly from one unit to other unit due to slight individual differences • Compositor’s errors reserved
Item JFX200-2513Head Staggered array of 2 headsPrint resolution 300, 450, 600, 900, 1,200dpi
InkType
UV curable ink: LUS-150 (C, M, Y, K, W)UV curable ink: LH-100 (C, M, Y, K, W, CI)
Ink supply system Supplied from 1-litre bottles for each colourInk circulation system*1 White ink circulation using Mimaki Circulation Technology (MCT)
Maximum media size 2,500 × 1,300mm
MediaDimensions (W×D) 2,500 × 1,300mmHeight 50mmWeight 50 kg/m2 non concentrated load
Media absorption Absorption xed through use of a vacuum
Number of vacuum zones 2 partitions (X-axis direction)
Rangeaccuracy
Absolute accuracy ±0.3mm or ±0.3% of the speci ed range, whichever is largerReproducibility ±0.2mm or ±0.1% of the speci ed range, whichever is larger
UV device LED-UV systemStandard service life*2 Over 5,000 hours
Interface USB2.0
Safety standard VCCI class A, CE Marking, CB Report, UL (U.S. safety organization), RoHS directive, UL 60950-1, FCC class A
Input power supply Single phase, 200 V AC-240 V AC, 50Hz/60Hz, up to 15APower consumption Up to 3.6kVA
Installation environment
Temperature 15°C-30°CRelative humidity 35%-65% RH
Accuracy maintainedtemperature 18°C-25°C
Temperature gradient Up to ±10°C/hDust Similar to standard of ce environments
Dimensions (W×D×H) 4,400×2,450×1,250mmWeight 630kg
Item Colour Item No. Remarks
LUS-150
Cyan LUS15-C-BA
Volume per bottle: 1 Litre
Magenta LUS15-M-BAYellow LUS15-Y-BABlack LUS15-K-BAWhite LUS15-W-BA
LH-100
Cyan LH100-C-BAMagenta LH100-M-BAYellow LH100-Y-BABlack LH100-K-BAWhite LH100-W-BAClear LH100-CL-BA
Tungsten replacementneedle for ionizer SPA-0208 4 pcs
Air lter kit SPA-0209 10 sets
.selttob ertiL 1 ni dlos era remirp tejkni dna knI •• LUS-150 inks can be used in combination with LH-100 Clear ink.
fo erutxet eht no gnidneped reffid yam kni 051-SUL yb detibihxe ytilibixe fo tnuoma ehT •the print media used.
• Try out the ink on a test page before proceeding with a full print job. .dezilitu eb ot retnirp eht fo seitilibapac deeps lluf eht wolla ton yam 001-HL htiw gnitnirP •
Options
noitcus hguone evah ton seod retnirp eht htiw deilppus semoc taht tinu muucav eht fI •power, please purchase a different vacuum unit with optional settings.
tcennoc ot dedeen si yletarapes dlos )0330J-TPO( tik rotcennoc rewolb lanoitpo ehT •a vacuum unit with optional settings to the JFX200-2513.
eht rof taht morf etarapes enil ylppus rewop nwo rieht eriuqer osla stinu muucaV •printer itself.
Item Item No. RemarksIonizer kit OPT-J0322 Static eliminator kit
Vacuum unit (φ 1mm x 200mm) OPT-J0217 Single-phase, 200V-240V, 30A, 1.9kW
Optional blower connector kit OPT-J0330
*1 MCT works only with white ink.*2 The standard service life times listed are estimates and do not guarantee the operation.
Sophisticated RIP Software maximizes the performance of JFX200-2513
Web update function is supported:
This facility enables easy program
updates and pro le downloading to
be performed via the internet.
Intuitive and user-friendly operation
1. Easy to follow icons enable intuitive and user-friendly operation
2. Related settings feature in one window to simplify RIP operations with ‘Register as Favourite’ option available for regularly used layouts
3. Printing progress can be monitored on the main screen
1 RUE DE LA HAYE - LE DÔME 1 - ROISSYPÔLE - 93290 TREMBLAY EN FRANCETÉL. 01 78 78 72 50 - FAX 01 78 78 72 51
TÉL. 04 97 02 25 25 - FAX 04 97 02 25 20GREEN TECH BÂT. 1 - 549, BD PIERRE SAUVAIGO - 06480 LA COLLE-SUR-LOUP
[email protected] www.s2idigital.com www.s2istore.com
KEY TECHNICAL FEATURES • • •
Affordable, high-performance fl atbed UV LED printerThe latest addition to Mimaki’s family of UV LED fl atbed printers, the JFX200-2513 delivers unparalleled results to expand the potential for professional sign and graphics companies. A choice of inks, including white and clear, offers unlimited creative opportunities, with the capability to print to a wide range of substrates. Easy to use and with a compact footprint, the JFX200 -2513 maximizes productivity by using industry standard-sized media, on its 2.5m x 1.3m bed.
Create ... Large format signage & graphics, including back-lit, retail PoS exhibition graphics, interior decor panels, creative displays and much more...
JFX200-2513 delivers • • •
m52 ot pu sdeeps tnirp evitcudorp ylhgiH • 2/h and 12.5m2/h with simultaneous white ink printing
• Maximum print area of 2.5m x 1.3m
ssecorp tnemecalper kni pu gnideeps ,tinu ylppus kni depoleved ylweN •
• Mimaki Advance Pass System reducing bandings
• Layout pins simplifying the process of aligning media
ygolonhceT noitalucriC ikamiM •preventing pigment sedimentation of white ink
htiw gnitnirp reyal owT •white ink to clear and coloured substrates
ecnamrofrep hgih dna tinu muucaV •Rasterlink RIP software as standard
ENGINEERING EXCELLENCEAND CREATIVE INNOVATION
Founded in Japan in 1975, Mimaki Engineering has
steadily grown by reputation and infl uence into a
global company with large operational bases in Asia
and the Pacifi c, United States and Europe.
Renowned for award-winning performance, peerless
build quality and innovative technology, Mimaki has
established itself as a leading manufacturer of
wide-format inkjet printers and cutting machines
for the sign and graphics, textile and apparel and
industrial markets. In addition, Mimaki also provides
a comprehensive range of supporting products;
hardware, software and associated consumable
items, such as inks and cutting blades.
From outdoor signage and billboards to interior
decoration and furnishing, from packaging and
labels to promotional gifts and apparel, Mimaki
is committed to developing technology that sets
new industry standards, producing machines and
products that turn the imagination of our customers
into breath-taking reality.
• • • Mimaki delivers
UV LED CURABLE
50mm MAX. MEDIA THICKNESS
2,500mm x 1,300mm MAX. PRINT AREA
4 COLOURS + WHITE + CLEAR
25m2/h MAX. PRINT SPEED
FLEXIBLE/HARD INK OPTIONS
1,200dpi MAX. RESOLUTION
High Productivity and Print Speed
0 10 20 25m2/h 0 10 20 25m2/h
300x450HQ6Pass Bi/N
600x6008Pass Bi/Hi
600x90012Pass Bi/Hi
1200x120016Pass Uni/N
High speed
Standard
Production
High quality
High speed
Standard
High quality
300x450HQ12Pass Bi/N
600x90024Pass Bi/Hi
1200x120032Pass Uni/Hi
25m2/h
4-colour 4-colour + White
12.5m2/h
18m2/h
12.5m2/h
6.2m2/h
1.7m2/h
3.4m2/h
5 sheets
8 sheets
4 sheets
4 sheets
1 sheets
2 sheets
the power to
Print up to 8 sheets of 8ft x 4ft (2,440 x 1,220mm) media per hour
New Ink Supply Unit1 Litre bottles of ink can be easily inserted from the front of the printer, speeding up the replacement process
Easy operation:Layout pins eliminate alignment problemsThe machine is equipped with pins and a scale to ensure accurate substrate alignment on the � atbed. By � xing the substrate to the pins, checking the placement against the scale and then editing the design data or printer setting accordingly, all alignment problems are eliminated
Direct-to-media printing even on to thick mediaImages can be printed directly onto rigid media up to 50mm thick, providing great versatility and a wider range of potential applications.
Layout pinsCompatible with print media up to 50mm thick
