Peinemann Equipment B.V.

Nieuwe Langeweg 40, 3194 DB Hoogvliet

Tel: +31(0)10 - 29 55 000, Fax: +31(0)10 - 29 55 049

E-mail: pein@peinemann.nl, Website: www.peinemannequipment.com

For further information about

prices or technical specifi cations

please contact us at:

The hydraulicTube-Bundle-Extractor

Simple, like opening a bottle!

The right tools are half the job

The Hydraulic Tube-Bundle-Extractor is a self-con-

tained unit, which is easily lifted into position by

just one crane. Power’s no problem, either, since a

simple diesel motor is what makes the Extractor

fl ex its muscles. Yet, once in position, and clamped

to the shell-fl ange of and exchanger, the Extrac-

tor can exert a persuasive force of 50.000 kgf …

enough to break out even the most obstinate

tube-bundle into the open. Two trained men are

all you need (and Peinemann will take car of the

schooling, remember). Using the Extractor, they’ll

be able to free most bundles in as little as 15

minutes. If you’ve ever had to tangle with a heat

exchanger personally, you’ll appreciate just how

impressive that is.

The standard extractor is 8.00 m in length, and

weighs 7 tons. It is suitable for use on all plate and

tube heat exchangers up to 2.00 m diameter. In

case you might need a bigger of a smaller extrac-

tor, Peinemann can also make custom made ex-

tractors to suit your needs.

Once the Extractor is suspended in position, and

has been carefully balanced, it is clamped to the

exchanger shell. The hydraulic pulling car is then

moved to the forward position. The hydraulic car

is secured to the tube-sheet, by means of 2 slings

fi tted to the pulling anchors on the side of the pull-

ing car. Now you’re ready to exercise a little pull.

The massive hydraulic power of the car pushing

against the shell-fl ange, builds up gently but irre-

sistibly … until the bundle breaks free.

The pull hook mechanism on the pulling car com-

pletes the job of drawing the bundle out in one

continuous stroke.

Once a bundle is resting completely on the Extrac-

tor, the load is trimmed using the special hydraulic

balancing cylinder. Both the bundle and the Ex-

tractor can be simply lifted clear. It’s not hard to see

that the Extractor is a tool which is equally good at

two jobs. After you have used the Extractor to pull

one bundle, you can also use it to push in a new

bundle again, in minimum time. With the Extractor,

you make valuable savings all around: *less confu-

sion *Less time *Less manpower *less risk of acci-

dents involving your people, or costly damage to

equipment. When you’ve checked out the Extrac-

tor yourself, we think you’ll agree with Peinemann

from Holland…

Peinemann from Holland wants to sell you the Hydraulic Tube-Bundle Extrac-

tor. But since this great new refi nery tool costs rather more than the standard

bottle-opener, you might prefer to hire the equipment, until you have assessed

it in the fi eld. Peinemann can handle that too. The company is one of Holland’s

largest plant-hire specialists. Peinemann can hire you the Hydraulic Tube-Bun-

dle-Extractor. They can also hire you some of their fl eet of forklift trucks, with

capacities from 1 to 100 tons, their mobile cranes, with capacities from 4 top

650 tons, or their aerial platforms up to 47 meter If you want to know the nuts-

and bolts of the operation, give Peinemann a call, or drop a line. They’ll be

happy to tell you the rest.

An equally sensible solution

Maximum security against expensive

breakages

Making a double saving

Quickly pay back your initial investment

It isn’t just a good idea. It’s an absolute corker!

PN_617005_Folder_Bundeltrekker_d1 1 17-04-2008 13:09:54

The hydraulic Tube-Bundle-Extractor of Peinemann

Did you ever think what life would be like without

bottle-openers? Pretty grim, huh? Well, that was

how it was with some refi nery maintenance chores.

Changing the tube-bundles of heat-exchangers, for

instance, could be a pretty grim business. Not unlike

trying to pull the cork out of a bottle with your teeth.

Happily, civilisation comes up with answers for

these things. It gave us the bottle-opener. After

that, it was only a matter of time before someone

came up with an equally sensible solution…to the

problem of how to separate a 30-ton bundle of

tubes from the ever-loving grip of an exchanger

shell. That solution is a smart bit of engineer-

ing called the Hydraulic Tube-Bundle-Extractor.

The Hydraulic Tube-Bundle-Extractor is a high qual-

ity machine which has been designed specially to

deal with both tube and plate heat-exchanger units.

It draws out a bundle just as smoothly and surely as

you or I uncork a bottle. The parallels between the

Hydraulic Tube-Bundle-Extractor and the homely

bottle-opener don’t end there. Both are simple, re-

liable pieces of equipment. Treat them right, and

they won’t let you down. Both are swiftly brought

into position. Both accomplish the job with the ab-

solute minimum of blood, sweat and tears – and the

maximum security against expensive breakages.

The big difference is that a bottle-opener only

takes corks out. The Hydraulic Tube-Bundle-

Extractor can also be used to insert bundles – mak-

ing a double saving in jour maintenance schedule.

Peinemann from Holland can sell or rent you the

Hydraulic Tube-Bundle-Extractor, and teach your

own people how to use it. You don’t need an engi-

neering degree to understand how this new refi n-

ery tool works – or to fi gure out how quickly it can

pay back your initial investment. You’ll fi nd the de-

tails on the following pages. Read them carefully.

When you’ve fi nished, you might want to open a

bottle. Just to celebrate.

Did you ever think what life would be like without bottle-opener don’t end there. Both are simple, re-

Simple, like opening a bottle!

Description

1 main frame contains butt plates (1A)

2 motor compartment with power source and pump

3 hydraulic car

4 vertical moving sheet covered with heavy duty plastic

5 two pulling anchors for sling-type pulling operation

6 pull hook mechanism covered with heavy duty plastic

7 two front clamps and two clamping cylinders*

8 one balancing cylinder*

9 bed plate with four sliding plates

10 two sling cylinders*

11 two ‘V’ block cars

12 remote control panel

13 bundle shaped tension arms

14 toothed gear tracks for hydraulic car

15 hydraulic hose reel for feeding hydraulic motors of car

*all cylinders are fi tted with safety valves

PN_617005_Folder_Bundeltrekker_d2 2 17-04-2008 13:12:47

The hydraulic Tube-Bundle-Extractor of Peinemann

Did you ever think what life would be like without

bottle-openers? Pretty grim, huh? Well, that was

how it was with some refi nery maintenance chores.

Changing the tube-bundles of heat-exchangers, for

instance, could be a pretty grim business. Not unlike

trying to pull the cork out of a bottle with your teeth.

Happily, civilisation comes up with answers for

these things. It gave us the bottle-opener. After

that, it was only a matter of time before someone

came up with an equally sensible solution…to the

problem of how to separate a 30-ton bundle of

tubes from the ever-loving grip of an exchanger

shell. That solution is a smart bit of engineer-

ing called the Hydraulic Tube-Bundle-Extractor.

The Hydraulic Tube-Bundle-Extractor is a high qual-

ity machine which has been designed specially to

deal with both tube and plate heat-exchanger units.

It draws out a bundle just as smoothly and surely as

you or I uncork a bottle. The parallels between the

Hydraulic Tube-Bundle-Extractor and the homely

bottle-opener don’t end there. Both are simple, re-

liable pieces of equipment. Treat them right, and

they won’t let you down. Both are swiftly brought

into position. Both accomplish the job with the ab-

solute minimum of blood, sweat and tears – and the

maximum security against expensive breakages.

The big difference is that a bottle-opener only

takes corks out. The Hydraulic Tube-Bundle-

Extractor can also be used to insert bundles – mak-

ing a double saving in jour maintenance schedule.

Peinemann from Holland can sell or rent you the

Hydraulic Tube-Bundle-Extractor, and teach your

own people how to use it. You don’t need an engi-

neering degree to understand how this new refi n-

ery tool works – or to fi gure out how quickly it can

pay back your initial investment. You’ll fi nd the de-

tails on the following pages. Read them carefully.

When you’ve fi nished, you might want to open a

bottle. Just to celebrate.

Did you ever think what life would be like without bottle-opener don’t end there. Both are simple, re-

Simple, like opening a bottle!

Description

1 main frame contains butt plates (1A)

2 motor compartment with power source and pump

3 hydraulic car

4 vertical moving sheet covered with heavy duty plastic

5 two pulling anchors for sling-type pulling operation

6 pull hook mechanism covered with heavy duty plastic

7 two front clamps and two clamping cylinders*

8 one balancing cylinder*

9 bed plate with four sliding plates

10 two sling cylinders*

11 two ‘V’ block cars

12 remote control panel

13 bundle shaped tension arms

14 toothed gear tracks for hydraulic car

15 hydraulic hose reel for feeding hydraulic motors of car

*all cylinders are fi tted with safety valves

PN_617005_Folder_Bundeltrekker_d2 2 17-04-2008 13:12:47

Peinemann Equipment B.V.

Nieuwe Langeweg 40, 3194 DB Hoogvliet

Tel: +31(0)10 - 29 55 000, Fax: +31(0)10 - 29 55 049

E-mail: pein@peinemann.nl, Website: www.peinemannequipment.com

For further information about

prices or technical specifi cations

please contact us at:

The hydraulicTube-Bundle-Extractor

Simple, like opening a bottle!

The right tools are half the job

The Hydraulic Tube-Bundle-Extractor is a self-con-

tained unit, which is easily lifted into position by

just one crane. Power’s no problem, either, since a

simple diesel motor is what makes the Extractor

fl ex its muscles. Yet, once in position, and clamped

to the shell-fl ange of and exchanger, the Extrac-

tor can exert a persuasive force of 50.000 kgf …

enough to break out even the most obstinate

tube-bundle into the open. Two trained men are

all you need (and Peinemann will take car of the

schooling, remember). Using the Extractor, they’ll

be able to free most bundles in as little as 15

minutes. If you’ve ever had to tangle with a heat

exchanger personally, you’ll appreciate just how

impressive that is.

The standard extractor is 8.00 m in length, and

weighs 7 tons. It is suitable for use on all plate and

tube heat exchangers up to 2.00 m diameter. In

case you might need a bigger of a smaller extrac-

tor, Peinemann can also make custom made ex-

tractors to suit your needs.

Once the Extractor is suspended in position, and

has been carefully balanced, it is clamped to the

exchanger shell. The hydraulic pulling car is then

moved to the forward position. The hydraulic car

is secured to the tube-sheet, by means of 2 slings

fi tted to the pulling anchors on the side of the pull-

ing car. Now you’re ready to exercise a little pull.

The massive hydraulic power of the car pushing

against the shell-fl ange, builds up gently but irre-

sistibly … until the bundle breaks free.

The pull hook mechanism on the pulling car com-

pletes the job of drawing the bundle out in one

continuous stroke.

Once a bundle is resting completely on the Extrac-

tor, the load is trimmed using the special hydraulic

balancing cylinder. Both the bundle and the Ex-

tractor can be simply lifted clear. It’s not hard to see

that the Extractor is a tool which is equally good at

two jobs. After you have used the Extractor to pull

one bundle, you can also use it to push in a new

bundle again, in minimum time. With the Extractor,

you make valuable savings all around: *less confu-

sion *Less time *Less manpower *less risk of acci-

dents involving your people, or costly damage to

equipment. When you’ve checked out the Extrac-

tor yourself, we think you’ll agree with Peinemann

from Holland…

Peinemann from Holland wants to sell you the Hydraulic Tube-Bundle Extrac-

tor. But since this great new refi nery tool costs rather more than the standard

bottle-opener, you might prefer to hire the equipment, until you have assessed

it in the fi eld. Peinemann can handle that too. The company is one of Holland’s

largest plant-hire specialists. Peinemann can hire you the Hydraulic Tube-Bun-

dle-Extractor. They can also hire you some of their fl eet of forklift trucks, with

capacities from 1 to 100 tons, their mobile cranes, with capacities from 4 top

650 tons, or their aerial platforms up to 47 meter If you want to know the nuts-

and bolts of the operation, give Peinemann a call, or drop a line. They’ll be

happy to tell you the rest.

An equally sensible solution

Maximum security against expensive

breakages

Making a double saving

Quickly pay back your initial investment

It isn’t just a good idea. It’s an absolute corker!

PN_617005_Folder_Bundeltrekker_d1 1 17-04-2008 13:09:54