ACCUVAC BasicClear Airways. Fast and Anywhere.

ACCUVAC Basic with disposable collection canister, including accesso-ries bag, 12-volt connection cable and wall mounting (WM 10705)

ACCUVAC Basic with reusable collection canister, plug-in charger (WM 10709) and optional rinsing glass (WM 15229)

ACCUVAC BasicIt is crucial to survival to keep the patient‘s airways free and clear. For decades ACCUVAC Basic has set the stan-dard for medical suction. With suctioning of your patient‘s mouth, nose, throat, trachea and bronchial tubes, ACCU-VAC Basic effectively removes obstructions to breathing. The suction pump can be used at the scene of an emer-gency, in the hospital, in nursing homes and in home care.

Broad application area, wide negative pressure range

ACCUVAC Basic can also be used safely in pediatrics. The vacuum settings can be appropriately adjusted for small patients. Beyond its purely medical application, the suc-tion pump ACCUVAC Basic can deflate vaccuum splints and vaccuum mattresses.

Clear Airways Fast Anywhere

ACCUVAC Basic: significantly safer

Versatile use Safe and hygienic Easy to use Conforms to EN 1789, safe accommodation

in any motor vehicle Tough and always ready for immediate use

Absaugung

Wall mounting with integrated charger: Device is automatically charged when it is returned to the wall mounting.

For every type of patient, for every emergency

Suction of secretions and food particles

Endotracheal and bronchial suction

Suitable also for use in pediatrics

Deflation of inflatable splints and matresses

Rinsing glass can be attached to left side of device

Safe use, wide range of applications

Patient safety ensured by negative pressure regulation from -0.05 to -0.8 bar

Safer secretion collection with autoclavable reusable collection canister with bacteria filter and overflow protection or with disposable collection bag with integrated overflow valve

Easy-to-read negative pressure on manometer

Very rugged

Anti-tip – stable housing and low center of gravity

Device handling tailored to your work

Tube holder plate integrated on front of device: You can quickly unwind the tube, which is always connected and ready for use.

Simple release and removal of device from wall mounting: Press the release catch and remove the device with one hand.

Secretion suction pump

Device description WM-No.

ACCUVAC Basic with disposable collection canister and plug-in charger 10700

ACCUVAC Basic with reusable collection canister and plug-in charger 10709

ACCUVAC Basic with disposable collection canister, 12-V connection cable, wall mounting and accessories bag 10705

ACCUVAC Basic with reusable collection canister, 12-V connection cable, wall mounting and accessories bag 10715

ACCUVAC Basic training videoWATCH ON

Suction

Accessories bag WM 10655

Rinsing glass set WM 15229 consisting of: Collection canister 1,000 ml (WM 10631), Holder for reusable collection canister (WM 15271)

12-V connection cable WM 10650 (NATO Stock Number 6150-12-369-6760) for ACCUVAC Rescue and ACCUVAC Basic

Plug-in charger WM 10750 complete, only for ACCUVAC Basic (only for charging) with Europe plug and country adapters for US, GB and AU (230 V)

Mains, charger unit WM 2610 (NATO Stock Number 6515-12-351-3182) for 230-volt AC (for ACCUVAC Rescue, ACCUVAC Basic, MODUL CapnoVol, MEDUMAT Elektronik)

Reusable collection canister refitting set, WM 15261 consisting of: Reusable collection canister set (WM 15269), Holder set for reusable collection canister (WM 15271)

Disposable collection canister refitting set, WM 15262 consisting of: Disposable collection canister set (WM 15268), Holder set (WM 15172)

6 Attachment set for hospital rails with two adapters WM 15805 also required to fasten device onto rail

7 Wall mounting for ACCUVAC WM 15208 for wall mounting of ACCUVAC, including installation set

8 Wall mounting for mains and charger unit WM 15844 for mounting ACCUVAC and MODUL CapnoVol on the wall

9 Attachment set for hospital rails with one adapter WM 15795 also required to fasten device onto rail

10 Holding plate for hospital rail WM 15845 also required to suspend device from rail

ACCUVAC Basic accessories

Complete view (front and rear) of mounting for ACCUVAC

Complete view (front and rear) of mounting for charger

1 Disposable collection canister WM 10732 (NATO Stock Number 6515-12-368-0701)

also available in sets of 10, 20 and 50 pieces

2 Disposable tube with fingertip for use WM 10733 with disposable system

(NATO Stock Number 6515-12-368-0702) 180 cm long, Ø 5 mm, also available in sets of 10, 20 and 50 pieces

Consumable materials

3 Reusable suction tube WM 10662 130 cm long, Ø 10 mm, also available in sets of 10, 20 and 50 pieces

4 Endpiece with fingertip control WM 10666 also available in sets of 10, 20 and 50 pieces

5 Bacteria filter for reusable collection canister WM 10675 sets of 25, 50 and 100 pieces

7

8

61

3

2

9 10

54

Suction

Disposable Collection Canister Set WM 15268 consists of: Disposable collection canister (WM 10730) Vacuum tube (WM 10740) Instructions for Use

Disposable collection canister WM 10730

Vacuum tube WM 10740

Holder set for disposable collection canister WM 15172 consists of: Holder (WM 10735) Fasteners

Holder set WM 10735

Replacement parts for disposable system

Catch release key set, green WM 15397

Noise suppressor WM 10665

Lead storage battery WM 10747

Tube holder plate, green WM 10723

Fuses, power supply WM 2692

(F1/F100) and rechargeable battery (F2/F101)

Fuse for motor vehicle plug WM 10673

Replacement parts for ACCUVAC Basic

Filter cover, WM 10632

Vent tab

Bacteria filter, WM 10675

Secretion cover, WM 10636

Reinforcement clamp, WM 10641Locking tab

Ball (overfillguard), WM 10643

Sealing ring, WM 10635

Collection canister, 1000 ml, WM 10631

Reusable collection canister, complete, WM 10630

Holder, WM 15271

Endpiece with fingertip control, WM 10666

Suction tube, WM 10662

Replacement parts for reusable system

Call us! For information

and replacement parts

contact us at:

+49-(0)40-5 47 02-120

Suction

8301

5-EN

-12/

2012

© C

opyr

ight

Wei

nman

n, H

ambu

rg. D

uplic

atio

n of

any

kin

d on

ly w

ith th

e ex

pres

s pe

rmiss

ion

of W

einm

ann.

Al

l rig

hts

to d

esig

n an

d sp

ecifi

catio

n m

odifi

catio

ns re

serv

ed.·

Technical data ACCUVAC Basic

Product class as per directive 93 / 42 / EEC: IIb

Standards used: EN ISO 10079-1 EN 60601-1 EN 1789

Classification as per EN ISO 10079-1: high vacuum / high flow

Dimensions (W x H x D) With reusable collection canister:

With disposable collection canister:

370 x 280 x 140 mm

385 x 280 x 140 mm

Weight: about 5,4 kg

Temperature Operation: Storage: Humidity:

-18 °C to +40 °C -40 °C to +70 °C 30 to 75 % relative humidity, no condensation

maximum power consumption: 3,5 A

Charge voltage: 12 V to 13,8 V

Motor output: 50 W

Charging capacity display: 3 LEDs

Charging monitor: yes

Alarm for weak battery:

red LED

Rechargeable battery Service life:

Operating time:

Charging time:

Max. storage time without charging:

Rechargeable battery type:

400 charging and discharging cycles within approx. three years

> 40 minutes with full charge and highest suction level

max. 14 hours

6 months

sealed lead-acid battery 3,4 Ah

Suction capacity with free flow: (as per EN ISO 10079-1)

> 20 liters/min

Suction capacity with free flow (without canister and filter):

35 liters/min ± 10 %

Maximum vacuum: 0.8 bar (80 kPa)

Vacuum setting: -0.05 to -0.8 bar infinitely adjustable with dial

Mean sound level at -0.8 bar:

63,5 dB(A)

Degree of protection against water: IPX1

Overflow protection: - Overfill guard with ball and bacteria filter with reusable collection canister- Overflow valve filter in disposable bag for disposable collection canister

Secretion canister: autoclavable

Secretion canister- Volume: 1,000 ml

Vacuum tube For reusable system: For disposable system:

Ø 10 mm, length 1.300 mmØ 5 mm, length 1.800 mm

Simply professional

You can rely on Weinmann. We set the standards for mobile

solutions in patient ventilation. Our 130 years of experience and

close association with professional users in emergency medical

services, armies/public authorities and hospitals have led to the

development of intelligent and perfectly coordinated technolo-

gies. In conjunction with the professionals in emergency, trans-

port and disaster medicine, we pursue our shared goal of saving

human lives.

Would you like to know more?

Call us on

+49-(0)40-5 47 02-120