ACADE Ess IEC V1 - Digital...

1

Chapter

1

Basic WorkflowChapter 1:

This chapter describes the AutoCAD® Electrical version of AutoCAD® software. AutoCAD Electrical is created for electrical engineers who design industrial control systems. Along with the familiar AutoCAD working environment, an intuitive menu system is included that gives you access to many industry-specific tools that automate the electrical control system’s design process. AutoCAD Electrical is an effective design tool for you to use to create schematics, diagrams, layouts, and related reports faster and more accurately than using AutoCAD software.

Objectives

After completing this chapter, you will be able to:

■ Describe and list some of the AutoCAD Electrical specific enhancements integrated into the standard AutoCAD environment.

■ Describe and execute the basics steps required to create or edit an AutoCAD Electrical circuit.

Sample Chapter

Autodesk® Intellectual Property

Not Valid for Sale or R

esale

2 ■ Chapter 1: Basic Workflow

Lesson: Design Environment

Overview

This lesson is an overview of the AutoCAD Electrical environment, describing those features that are common to both AutoCAD and AutoCAD Electrical, and those features that are different.

Comparing AutoCAD Electrical to AutoCAD helps you to learn how AutoCAD Electrical functions work and how to use them correctly.

Objectives

After completing this lesson, you will be able to:

■ Describe and compare the AutoCAD Electrical application with AutoCAD software, including symbol libraries and search paths.

■ Describe AutoCAD Electrical-specific menu interface options.■ Describe several of the available AutoCAD Electrical Help options.

AutoCAD Electrical environment

Sample Chapter



esale

Lesson: Design Environment ■ 3

Environment Comparisons

The AutoCAD Electrical environment differs only slightly from the familiar AutoCAD interface. Along with Electrical-specific commands, other enhancements include Electrical symbol libraries and more powerful search path options. Knowing these differences can help you to learn the AutoCAD Electrical interface more quickly.

About AutoCAD Compatibility

AutoCAD Electrical is not just compatible with AutoCAD. It is AutoCAD. AutoCAD Electrical is completely integrated with AutoCAD software, and it shares the same commands and functionality. Automated and enhanced commands have been added to AutoCAD Electrical to help you create schematic drawings.

Electrical intelligence is stored in the drawings, mainly in the form of attributed blocks. Because the electrical information is stored in the drawing and not in a proprietary database, you can manipulate the drawings with any program that you can use to edit standard DWG™ files without corrupting the drawing and electrical intelligence.

Sample Chapter



esale


Familiar AutoCAD Environment

The AutoCAD Electrical menu system has many industry-specific tools that automate the electrical control systems’ design process. With the familiar AutoCAD working environment, you can use AutoCAD commands in AutoCAD Electrical for normal operations. Many AutoCAD Electrical functions are powerful AutoCAD macros, and other product functions use AutoCAD programming languages to create electrical industry-specific commands.

AutoCAD Electrical produces generic AutoCAD objects in generic AutoCAD drawings. Everything automatically created by AutoCAD Electrical can be completed with a sequence of AutoCAD manual operations. Consequently, AutoCAD Electrical drawings can be edited with AutoCAD, or AutoCAD LT®, without corrupting or damaging AutoCAD Electrical functionality.

Symbols and Footprints

All AutoCAD Electrical schematic blocks, or symbols, are standard AutoCAD blocks using a combination of attributes and xdata to enhance the block’s intelligence. Symbols typically rely more on attributes, while panel layout blocks, or footprints, rely more on xdata.

You can create symbols with generic AutoCAD block creation tools or with the AutoCAD Electrical Symbol Builder wizard. The Symbol Builder wizard automates many manual tasks, including the creation, sizing, and placing of symbol attributes.

Symbol as inserted Exploded symbol

To differentiate between the two types of blocks, schematic blocks are usually referred to as symbols and panel layout blocks are usually referred to as footprints. Both symbols and footprints are referred to as components.

Sample Chapter



esale


Symbol Libraries

Several electrical symbol libraries are included with AutoCAD Electrical. These libraries include:

■ Two sizes of JIC symbols, JIC1 and JIC125 (Joint Industrial Council – United States)■ Two sizes of IEC symbols, IEC2, and IEC4 (International Electromechanical Commission – Europe)■ One size of GB symbols (Gua Biao – Chinese)■ One size of JIS symbols (Japanese Industrial Standard)■ One size of AS symbols (Australian Standard)

Also included are several libraries of symbols for design processes other than electrical schematics. These libraries include the following symbols.

About the Scratch Database

AutoCAD Electrical automatically maintains a scratch database, which reflects a project drawing’s intelligence and is updated as the drawings are changed. The database carries a snapshot of the block and attribute information carried in the project’s drawing files so that projectwide functions can be processed more efficiently.

There is no need for you to manage the database; the drawing is the data storage area. If the scratch database is lost or corrupted, it is re-created automatically from the data stored in the project drawings.

Directory listing of available libraries

Type Symbols included

Hydraulic Filters, valves, cylinders, pressure switches, motors, pumps, meters, restrictors, quick disconnects, flow arrows, and other miscellaneous components that all adhere to the NFPA/T3.10.4R1-1990 and AS1101.1-1993 standards.

Pneumatic Operators, valves, flow paths, filters, regulators, cylinders, meters, motors, quick disconnects, mufflers, manifolds, flow arrows, and other miscellaneous components.

P & ID Equipment, tanks, nozzles, pumps fittings, valves, actuators, logic functions, instrumentation, flow, flow arrows that all adhere to the ANSI/ISA S5.1 instrumentation standard.

Sample Chapter



esale


User Interface

In addition to the AutoCAD menus and tools, AutoCAD Electrical adds several industry-specific tools that are specifically for electrical engineers, designers, and drafters. These additional tools are used, and can be customized, in the same manner as the standard AutoCAD menus.

Just as with AutoCAD, seldom is one AutoCAD Electrical method the best for every situation. By familiarizing yourself with the location and uses of the tools found on the AutoCAD Electrical interface, you can develop the most effective methods to accomplish the tasks associated with your job.

Main User Interface Elements

Some of the main interface tools are shown.

Project Manager

Projects, Components, Wires, and Panel Layout menus

Toolbars

Tool palette

Sample Chapter



esale


Toolbars

When you install AutoCAD Electrical using the default settings, three additional toolbars are displayed in addition to the standard AutoCAD configuration of toolbars: ACE: Main Electrical, ACE: Main Electrical 2, and ACE: Panel Layout.

You use the ACE: Main Electrical and ACE: Main Electrical 2 toolbars primarily in the creation of the wiring diagram or schematic drawings. These toolbars contain the wiring and schematic symbol insertion commands. You use the ACE: Panel Layout toolbar to create panel layout drawings. This toolbar contains commands to insert footprints, din rails, and balloons.

You can display the AutoCAD Electrical toolbars by clicking Projects > Toolbars. You can also display toolbars with other functions from this menu, including the Quick Pick, Conversion Tools, and Extra Libraries toolbars.

Electrical Menus

In addition to the standard AutoCAD menus, AutoCAD Electrical has additional menus with industry-specific tools. With the exception of a few commands entered on the command line, all available AutoCAD Electrical commands are available on the Projects, Wires, Components, and Panel Layout menus.

The Panel Layout toolbar contains commands that are similar in function to the schematic toolbars. However, each toolbar contains commands that are operation-specific. For example, the Panel Reports command ignores schematic information and provides report options only for the panel layout drawings and components. The Panel Layout buttons are tinted green to help distinguish them from their blue-tinted schematic counterparts.

Sample Chapter



esale


Icon Menus

AutoCAD Electrical uses an icon menu system for the Symbol Insertion tool. The Schematic icon menu and the Panel icon menu look very similar, but as with the toolbars, they have different functionality, inserting schematic drawing symbols and panel layout footprints, respectively.

IEC version of the Schematic icon menu

Panel icon menu

Sample Chapter



esale


Context Menus

Like the context menus in AutoCAD, AutoCAD Electrical context menus are available when you right-click over an AutoCAD Electrical object, such as a symbol or a wire. Containing commonly used commands associated with the selected object, a context menu is displayed at the location of the cursor.

Tool Palettes

Some of the tool palettes included with the AutoCAD Electrical profile include Wires, Panel, Schematic, and Conversion. The AutoCAD Electrical tool palettes replace standard AutoCAD tool palettes. You can display the AutoCAD Electrical tool palettes by clicking the standard AutoCAD Tool Palette button on the AutoCAD Standard toolbar.

Context menu for symbols Context menu for wires

Section of Schematic palette

Sample Chapter



esale


Project Manager Palette

The Project Manager is a special type of tool palette for interfacing with the project file. The Project Manager palette shares much of the same display functionality of standard tool palettes including docking and auto-hide.

You can use the drop-down menu for creating new projects or selecting existing ones.

Double-click the project name in the Projects list to display a list of the drawings associated with the project. You can reorder the drawings, set library paths, and edit other project settings by right-clicking the project name to display a context menu.

Right-click a drawing name to open a context menu that you can use to open, copy, and rename drawing files, or access other editing tools to modify the drawing file.

Control buttons at the top of the palette enable you to access projectwide commands such as Resequencing and Plotting. You can also change the Drawing List Display Configuration.

You can expand the bottom of the Project Manager palette and use a toggle command to display either the Details or Preview window. The Details window displays information about the project, such as the file name and project database location. The Preview window displays a preview of a selected drawing file.

IECDemo project drawing list in the Project Manager

The Projects list window does not have drag-and-drop functionality. To edit the project file, you must use the shortcut menu or control buttons.

Sample Chapter



esale


Help System

The Help system for AutoCAD Electrical is separate from the AutoCAD Help system and deals strictly with AutoCAD Electrical topics. There are several tools to find answers to your questions within the Help system, including the Launchpad, online Help, InfoCenter, and the AutoCAD Electrical newsgroup.

AutoCAD Electrical Help Access

Click Help menu > Electrical Help Topics to access AutoCAD Electrical Help.

AutoCAD Electrical Help system

Sample Chapter



esale


Displaying the Launchpad

Click Help menu > Learning Tools > Launchpad to display the Launchpad.

Launchpad

The Launchpad appears the first time that you start AutoCAD Electrical. Do not close the dialog box and do not turn off the Display on Start-up check box until you have explored all the features that are available.

When you press F1 and a tooltip is not displayed, you access AutoCAD Help not AutoCAD Electrical Help.

When you press F1 and a tooltip is displayed, you access the Help topic for that specific tool.

Sample Chapter



esale


The following Launchpad links can help you to use AutoCAD Electrical.

Launchpad

links

Description

Getting Started

Manual

A PDF file that gives you basic information on how AutoCAD Electrical works to get you started. Each brief topic has simple instructions. This manual is not meant to replace classroom training (it does not cover all of the necessary topics, such as custom symbol creation). Topics include how to insert and edit ladders, wires, schematic components, PLCs, and wire numbers, as well as how to add drawings to a project, add drawing descriptions, and create panel layouts from schematic drawings.

AutoCAD

Electrical

Discussion

Group

Whether you are a beginner or an advanced user, you can get answers to your questions from other AutoCAD Electrical users here. This site is updated daily by some of the most knowledgeable AutoCAD Electrical users. Knowledgeable Autodesk personnel, who can provide solutions to your questions, also monitor it.

Click Help menu > Learning Tools > Launchpad. Click AutoCAD Electrical Discussion Group.

Advanced

Productivity

A special Help section covering several of the most requested advance topics about implementing and using AutoCAD Electrical. In addition to the standard Help file content, these in-depth topics are more instructional and explain workflows.

In the Launchpad, click Advanced Productivity.

Sample Chapter



esale


Electrical Help Tools

The Help system has several functions to assist you:

Function Description

Printable Help You can print topics or the entire contents of Help directly from the Help menu. Click the Contents tab, and right-click the topic or section you want to print. Click Print. To print a single topic that is listed on the Index tab, click the topic. Click Print.

Favorites To refer to a selected topic in the future, add the topic to the Favorites list. Select the topic. Click the Favorites tab. Click Add.

Sample Chapter



esale


InfoCenter

The InfoCenter tool is located on the menu bar. It provides access to the Communication Center panel for product updates and announcements as well as to the Favorites panel for saved Help topics. It also provides a simple method for searching for information in the Help system. You can search the AutoCAD and AutoCAD Electrical Help systems with the InfoCenter tool.

Search Use the Search function for topics you cannot find. Enter the words you want to search for. Press ENTER. All topics that contain your search words are displayed.

For more information, see AutoCAD Help. On the Index tab, enter InfoCenter.

Function Description

Sample Chapter



esale


Lesson: Basic Workflow

Overview

Understanding the basics of the design process can help you when you adapt AutoCAD Electrical to your design methods and standards. This lesson describes the basic workflow of AutoCAD Electrical design.

Although some methods are used more often than others, many methods are available. For example, you may start with a panel layout to determine and order components that require a long lead time. Then you can extract a component list from the panel layout to design the schematic. Or maybe you design your schematics in a point-to-point style, laying out components in empty areas of the drawing and then connecting the components with wires. AutoCAD Electrical automatically connects these components as wires are drawn across them.

Objective

After completing this lesson, you will be able to:

■ Describe and perform many of the basic steps necessary to complete an electrical design.

Schematic drawing, icon menu, and Bill of Material report

Sample Chapter



esale

Lesson: Basic Workflow ■ 17

Basic Circuit Workflow

One of the more frequently used styles for electrical design is drawing a ladder and rungs, and then inserting components from the icon menu system. Basic commands are described for a general overview of AutoCAD Electrical functionality.

Typical reset circuit including rungs, components, and wire numbers

Sample Chapter



esale


Process: Basic Circuit Workflow

The following is an overview of the schematic ladder-style design process.

1. Set the drawing properties options to match your company or project standards for component tag referencing, symbol libraries, ladder numbering, and other design parameters.

2. Add ladders, rungs, or wires to your schematic drawing.

3. Select the components to be added by browsing through the icon menu system.

Sample Chapter



esale


4. Select the insertion location point of the symbol. The symbol is inserted, and automatically trims and connects to the underlying wire.

5. In the Insert/Edit Component dialog box, enter the component information, including part-number lookups from a database, description and location code assignments, and pin-number checking and assignments.

6. Add wire numbers and cross-referencing.

Sample Chapter



esale


7. At any point during the design process, you can generate Bill of Material, Wiring, and other reports.

Sample Chapter



esale


Exercise: Explore the Basic Circuit Workflow

In this exercise, you create a simple electrical control circuit. You complete the following steps:

■ Insert ladder rungs and a push button.■ Insert push-button components and add part-

catalog information.■ Add a second push button and a relay coil.■ Add a light and wire numbers and generate a Bill

of Material report.

Insert Ladder Rungs and a Push Button

The completed exercise

Completing the Exercise

To complete the exercise, follow the steps in this book or in the onscreen exercise. In the onscreen list of chapters and exercises, click Chapter 1: Basic Workflow. Click Exercise: Explore the Basic Circuit Workflow.

1. If the Project Manager is not displayed, on the Schematic palette, click Project Manager.

2. In the Project Manager, from the Projects list, click Open Project.

3. Browse to where you installed the exercise files and select Basic_Workflow_IEC.wdp. Click Open.

4. On the Project Manager, double-click Basic_Workflow_IEC to expand the drawing list.

5. Right-click Basic_Workflow_IEC_06.dwg. Click Open.

6. Zoom in to the left side of the drawing. Make sure both the positive and 0 volt wires are displayed.

7. On the Wires palette, click Add Rung to add two rungs to the ladder at location references 1 and 2.

Sample Chapter



esale


8. Select the insertion points for two rungs at location references 1 and 2. (These will be at the x values of 70 and 110, respectively.)

NOTE: Be sure to click anywhere between the horizontal buses, rather than on the bus.

9. Notice that the rung automatically snaps to the nearest rung reference (if available) and adds connection symbols as necessary.

10. On the Schematic palette, click Insert Component to insert the first component, which is a push button to reset the circuit.

11. In the Insert Component: IEC: Schematic Symbols dialog box, click Push Buttons.

12. In the IEC: Push Buttons dialog box, click Push Button NO Momentary.

13. Select the insertion point on the left rung, near the upper end.

14. Now you annotate the component, adding description and catalog information. You can manually enter the desired information, but AutoCAD Electrical provides many tools for entering the information from various reference files.

In the Insert/Edit Component dialog box, notice that AutoCAD Electrical automatically assigns the tag name -06S1.

Under Description, click Defaults.

15. In the Descriptions dialog box, click System|Reset. Click OK.

Sample Chapter



esale


Add a Second Push Button and a

Relay Coil

16. Under Catalog Data, click Project.

17. In the Find: Catalog Assignments dialog box, click Active Project. Click OK.

18. In the Qsave dialog box, click OK to save the current drawing, ensuring that the drawing file data is up to date.

19. AutoCAD Electrical searches all of the drawings in the current project and lists any push buttons found in the HPB11/VPB11 Catalog Values (This Project) dialog box.

20. Notice that AutoCAD Electrical transfers the catalog data, including the subassembly information, into the Insert/Edit Component dialog box.

Select AB, 800EP-F2. Click OK.

21. Click OK.

This completes the insertion of the push button. This same basic process is repeated for most component insertions.

1. On the Schematic palette, click Insert Component to add an emergency stop push button.

2. In the Insert Component: IEC: Schematic Symbols dialog box, click Push Buttons.

Sample Chapter



esale


3. In the IEC: Push Buttons dialog box, click Mushroom Head NC Momentary.

4. Select the insertion point near the middle of the left rung.

5. In the Insert/Edit Component dialog box, notice that AutoCAD Electrical has automatically entered the tag name as -06S2. Because this is the second push button inserted, AutoCAD Electrical increments the last push button number automatically.

This drawing had the Automatic Numbering option set to Sequential. If the numbering was based on the component location, the second push button on the same rung would have a suffix such as “A” appended to it.

6. In the Insert/Edit Component dialog box, under Descriptions, click Defaults.

7. In the Descriptions dialog box, select Emergency|Stop. Click OK.

8. In the Insert/Edit Component dialog box, under Catalog Data, click Lookup.

9. In the Parts Catalog (Table: PB) dialog box, you can browse the parts catalog database to find the desired part number. You filter the available options using the edit boxes at the top of the dialog box.

Select the part number 800T-D6A. Click OK.

10. Notice that the information is transferred into the Insert/Edit Component dialog box.

11. Click OK.

This completes the push button insertion.

Sample Chapter



esale


Add Wire Branches and Relay Coil

Child Contacts

12. On the Schematic palette, click Insert Component to insert a relay coil.

13. In the Insert Component: IEC: Schematic Symbols dialog box, click Relays/Contacts.

14. In the IEC: Relays and Contacts dialog box, click Relay Coil.

15. Select the insertion point for the relay coil on the left rung, near the bottom, directly to the left of -06K2.

Notice that AutoCAD Electrical has automatically assigned the component tag name as -06K1.

16. In the Insert/Edit Component dialog box, under Description, click Defaults.

17. In the Descriptions dialog box, select Master Control|Relay. Click OK.

18. In the Insert/Edit Component dialog box, under Catalog Data, click Lookup.

19. In the Parts Catalog (Table: CR) dialog box, select the part number 700-P200A1. Click OK.

20. In the Insert/Edit Component dialog box, click OK.

21. You can easily edit component insertions with built-in utilities. To move the Description attribute to the outside of the ladder in the same way as the other relay coils on the drawing, do the following:

■ Right-click -06K1.■ Click Attributes > Move Attribute.■ Enter W.■ Press ENTER.■ Select the Master Control and Relay

attributes.■ Press ENTER.■ Select the Base point.■ Select the desired To point.■ Press ENTER.

NOTE: Changing the justification requires you to use the AutoCAD Properties command.

1. On the Wires palette, click Insert Wire to add two wires that create connecting branches for the circuit.

Sample Chapter



esale


2. For the wire start point, select a point on the left rung between -06K1 and -06S2.

3. Select the wire endpoint on the right rung, directly to the right of the wire start point.

Notice that AutoCAD Electrical adds angled wire connections automatically.

4. For the second wire branch, select the wire start point on the left rung between -06S1 and -06S2.

5. Select the wire endpoint on the right rung, directly to the right of the wire start point. Press ENTER.

6. On the Wires palette, click Trim Wire to trim the wire on the right rung between the two wire branches you added.

Sample Chapter



esale


Add a Light and Wire Numbers and

Generate a BOM Report

7. Select a point on the right rung between the two wire branches you added.

Notice that AutoCAD Electrical removed the selected wire. If the angled connections are no longer needed, AutoCAD Electrical also removes them.

8. On the Schematic palette, click Insert Component to add a contact from -06K1. This contact will latch the circuit when -06K1 is activated.

9. In the Insert Component: IEC: Schematic Components dialog box, click Relays/Contacts.

10. In the IEC: Relays and Contacts dialog box, click Relay NO Contact.

11. Select the insertion point on the right rung, directly to the right of -06S1.

This is a child contact of the parent coil.

12. In the Insert/Edit Child Component dialog box, under Component Tag, click Parent/Sibling to select the parent coil and transfer data from the parent to the child.

13. In the drawing, select anywhere on -06K1.

14. In the Insert/Edit Child Component dialog box, click OK to transfer data such as the tag, description, and pin numbers to the child component.

1. On the Schematic palette, click Insert Component to insert a red light to signal when the circuit is engaged.

Sample Chapter



esale


2. In the Insert Component: IEC: Schematic Symbols dialog box, click Pilot Lights.

3. In the IEC: Pilot Lights dialog box, click Standard Lights.

4. In the IEC: Standard Lights dialog box, click Red Light.

5. Select the insertion point on right rung, directly right of -06K1.

6. Instead of using the description defaults, you manually enter the description.

In the Insert / Edit Component dialog box, in the Description area, for Line 1, enter POWER.

7. For Line 2, enter ON.

8. Under Catalog Data, click Lookup.

9. In the Parts Catalog (Table: LT) dialog box, select AB, 800H-PR16R. Click OK.

10. In the Insert/Edit Component dialog box, click OK.

11. On the Wires palette, click Automatic Wire Numbers to add wire numbers.

12. In the Wire Tagging dialog box, click Drawing-Wide.

The drawing is searched for wire networks. A wire number is placed on each network found.

13. The last step is to extract a Bill of Material report from the components in the drawing.

On the Schematic palette, click Schematic Reports > Schematic Reports.

Sample Chapter



esale


14. In the Schematic Reports dialog box, in the Report Name area, select Bill of Material.

15. In the Bill of Material area, click Active Drawing. Click OK.

16. In the Qsave dialog box, click OK.

A Bill of Material report is generated from component data within the drawing. You can save the report to any of five different file formats, or place on the drawing in the form of a table.

17. In the Report Generator dialog box, click Close.

This completes the exercise.

Sample Chapter



esale


Chapter Summary

In this chapter you learned about the AutoCAD Electrical version of AutoCAD software.

AutoCAD Electrical is created for electrical engineers who design industrial control systems. Along with the familiar AutoCAD working environment, an intuitive menu system is included that gives you access to many industry-specific tools that automate the electrical control systems design process. AutoCAD Electrical is an effective design tool for you to create schematics, diagrams, layouts, and related reports faster and more accurately than using AutoCAD software.

Sample Chapter



esale

ACADE Ess IEC V1 - Digital...

Documents

Transcript of ACADE Ess IEC V1 - Digital...