63916_Tico (Ti) Brochure

Bar Saws Our 7 saws allow us to cut bar and billet from 1/4” to 20” diameter or 20” square.

Michigan52900 Grand River AvenueNew Hudson, MI 48165-8538

Toll-free 800.521.4392Local 248.446.0400Fax 248.446.1995

Texas519 Todd DriveOak Ridge North, TX 77385-7333


ISO 9001:2000

Tico Services Inside Cover

Fabrication Inside Cover

Forging 2

Sheet & Plate 3

Round Bar & Billet 4

Rod & Wire 5

Tubing 6

Pipe 7

Flanges 8 – 9

Butt Welding Fittings 10 – 12

Fittings & Threads 13 – 15

Fasteners 16 – 17

Chemistry Properties 18

Targets &Coating Materials 19 – 21

Tico Titanium, Inc., an industry leader in sputtering targets for the large area coating market, announces the creation of a new division, Coating Materials. This division was created to allow the company to increase market awareness and market penetration into the expanding field of PVD coatings.

Since 1978 Tico has supplied all forms of titanium, niobium, stainless steel, copper, aluminum, zirconium, and chromium sputtering targets as a segment of our core business as a global titanium service center over the past 25 years”.

Sputtering TargetsCoating Materials began producing Planar type sputtering targets in the late 1970’s with Titanium bolt down style targets for the architectural glass industry. Since then Coating Materials has been a world leader in supplying sputtering targets for the same industry and, we are now beginning a new thrust to supply the hard coating industry along with the decorative markets.

Custom ManufacturingCoating Materials is not limited to size or con figurations. Our manufacturing facility is fully implemented with modern CNC

machinery and sizes from very small to jumbo monolithic targets 160 inches long are no problem to produce. We can supply quotations using your drawings. Please send us your requests via any of our contacts.

Available WorldwideCoating Materials has entered into stocking agreements with several companies worldwide to better control the cost of ownership and availability of materials for fast shipments of product. Coating Materials can provide quotations for your sputtering needs via any of the contact information provided.

On-demand ShippingCoating Materials stocks many different sizes and materials on the shelf for fast shipment. Coating Materials can provide a stocking program for your circular magnetrons with on the shelf parts for fast delivery per your releases. Coating Materials will provide quotations for any design needed. Please contact us for a quick quote per your drawings.

We stock many different con? gurations of targets made from in-stock materials such as Ti‚ SS‚ Al‚ Nb‚ Zr. for quick shipments.

FabricationQuality Fabricated Products, Expert Welding and Repair Services, vertically integrated to supply products from Ingot to finished fabrication. ASME Code approved Fabrication Certificates of Authorization for Pressure Vessels andRepairs and/or Alterations (ASME Code Stamps U and R).

Industries We ServiceIndustrial, Chemical Process, Refinery, Petro-Chemical, Oil & Gas, Pulp &Paper, Utility, Food, Heat Exchangers, Transport, Navy & Marine.

Range of productsTanks & Vessels (to 25’ dia.), Filters, Shafting, Piping, Pipe Spools & Segments, Rings, Headers, Nozzles, Flares, Stacks, Ejectors, Standard, Specialty & Custom Fabrications and Prototype Parts.

FacilitiesFacilities include a 66,000 ft2 Service Center & Warehouse in MI and 20,000 ft2 in TX withcombined Water-Jet, Shear, Saw, & Torch Cutting capabilities ,including a shear capable of cutting 7/8” thick x 20 ft plate, plate saw cutting to 10” thick x 8 ft and bar saw cutting to 20” dia.

A separate 20,000 ft2 double bay fabrication facility (also in TX) with lift capacity to 20 tons and forming equipment to include a 50 ton Ironworker, ½” x 10’ Plate Roll,16’ x 180 ton Press Break and Sandblaster along with certified GTAW (TIG) and GMAW (MIG) welding processes

Water Jet Cutting We are able to cut titanium shapes with excellent edge finish and a high degree of intricacy or size tolerance using abrasive Water-Jet cutting systems on tables to 6 ft. x 12 ft. and 10 ft. x 26 ft.Custom patterns can be reproduced with the use of a CAD system. Water-Jet cut titanium materials supplied by TICO typically include near-net-shape rings and flanges that are finish-machined by the customer. For the fabricator, such near-net shapes offer significant advantages over conventional solid square blocks of titanium by dramatically reducing machining time, costs and scrap.

Plate Saw Cutting Our 2 saws allow us to cut to minimum dimensions and up to 10” thick. Our wide throat saw increases our width capacity with length capability to 145” long.

Plate Shears Our large Cincinnati plate shear shown below, the largest dedicated titanium plate shear in the industry, increases our shearing capability to 7/8” thick x 20’. Four (4) additional shears fill the balance of cut size options.

We stock many different

confi gurations of targets made

from in-stock materials such as Ti‚

SS‚ Al‚ Nb‚ Zr. for quick shipments.

Welcome to Tico Titanium, Inc. Since 1957 we’ve established a reputation for service, responsiveness and quick deliveries. Our product capabilities include Titanium Plate, Sheet, Bar, Billet, Weld Wire, Tube, Pipe

and Forgings, along with Fasteners, Fittings, Flanges and Custom Fabrications. Our extensive Inventory, Water-Jet Cutting capabilities and the many Specialty Products and Services we provide

allows Tico to offer a full line of stocked, cut and custom titanium products.

We stock the most varied titanium inventory in America in our modern 66,000 sq.ft. facility in Wixom, Michigan (west of Detroit) and a second 20,000 sq.ft. facility in Oak Ridge North, Texas (north of Houston).

Our multi-million dollar inventory position (supplied to ASTM and/or ASME Standards & Speci? cations) is Tico’s commitment to stock a full compliment of Commercially Pure (CP) and certain alloy grade

products to provide for our customers’ requirements with a quick turnaround.

General Forging Specifi cations

Size: Approximate sizes are shown below, other Sizes Available on Request

Weight: To approximately 10,000 lbs. (Unless otherwise stated)

Construction Standards: Open Die Forged from Ingot, Slab, Billet or Bar Smooth Forged or Rough Machined (or as noted) (Finish Machined - On Request)

Grades: Listed below. (Other Grades Available on Request)

Forging

Tico Titanium, Inc. has been providing quality Forged products for many years for use in a variety of industrial applications including Chemical, Oil & Gas, Re nery, Marine and many others.

Custom Open Die Forged, our products are available in many grades and forms - OD, Widths, Lengths and surface nish, and weighing up to10,000 lbs. (in titanium weight; density = 0.163 lbs/ in3 ) to ASTM & ASME standards / speci cations.

Standard, Custom and Prototype requirements are welcome.

Forged BlanksSize: 2” to approximately 70” OD

or Width x Length Grades: F-1, F-2, F-3, F-4, F-5, F-7

and F-12 ASTM B381 and/or ASME SB381

Forged Discs Size: 2” to 110” OD Grades: F-1, F-2, F-3, F-4, F-5, F-7

and F-12ASTM B381 and/or ASME SB381

Forged Shafts Integrally Flanged / Stepped / Custom Designed / StraightSize: To approximately 20” OD; Length max. 450”Grades: F-1, F-2, F-3, F-4, F-5, F-7 and F-12, also 1, 2, 3, 4, 5, 7 and 12ASTM B348 and/or ASME SB348 ASTM B381 and/or ASME SB381

Forged Tube Sheet BlanksSize: 2” To approximately 70” OD

or Width Grades: F-1, F-2, F-3, F-4, F-5, F-7


Forged BlockSize: Squares or Rectangles to approximately 70” Wide Grades: F-1, F-2, F-3, F-4, F-5, F-7

and F-12, also 1, 2, 3, 4, 5, 7 and 12

ASTM B348 and/or ASME SB348 ASTM B381 and/or ASME SB381

Forged RingsSize: 2” to 110” ODWeight: to approximately 6,000 lbs.Construction: Open Die

Press ForgedGrades: F-1, F-2, F-3, F-4, F-5, F-7


Forged SleevesSize: to approximately 70” ODGrades: F-1, F-2, F-3, F-4, F-5, F-7


Seamless Rolled RingsSize: to approximately 160” OD; Face Height (max.) = 30” Weight: approx. 50 to 5,000 lbs.Construction: Open Die Ring RolledGrades: F-1, F-2, F-3, F-4, F-5, F-7


Forged BarSize: to approximately 20” ODCut-to-size Lengths - maximums:<8” OD = 30’ / >8” OD - 12” OD = 33’ / @ 20” OD = 16’Grades: F-1, F-2, F-3, F-4, F-5, F-7

and F-12, also 1, 2, 3, 4, 5, 7 and 12

ASTM B348 and/or ASME SB348 ASTM B381 and/or ASME SB381

Threaded Rod

Blind FlangeWeld Neck Flange

1/2” through 24” NPS Thickness from 1/8” through 1-1/4”OD from 1-3/4” through 28-1/8” ID from 5/8” through 24”

Class 150, 300, 600, 900, 1500 and 2500.(Blank Dimensions Only) ASME B16.48Forged and Water-Jet Cut to the Dimensionsand Tolerances of ASME B 16.48.Raised Face or Flat Surface. Gasket Surface Finish: 125 RMS,MIll Finish or Serrated

ASTM Grades 2, 3, 4, 5, 7 and 12[Other Grades Available on Request]

Specifi cations ASME B 16.48 (Dimensions Only) ASME B 16.5(Raised Face Gasket Surface FInish & Dimensions Only)

RF Slip-on Flange

Figure 8 Blanks

Lap-Joint Flange

(shown here)

Threaded Flange

45º Elbow

90º Elbow

MSS Stub End

Eccentric Reducer Concentric Reducer

Butt Weld Tee

Elliptical Weld Cap

Reducing Tees Available on request

Threaded 90º Elbow

Threaded TeeHalf Coupling

Full Coupling

Hex Head Bushing

Square Head Pipe Plug

Hex Plug

Pipe UnionASTM B381 / ASME SB381Threaded Outlets

ASTM B381 and/or ASME SB381Dimensions to MSS-SP-97

( Class, Schedule sizes and Design to be speci ed )

Threaded OutletOutlets: 1/4” through 18” NPS

Pipe Run: 1/4” through 34” NPS

Socket Welding OutletOutlets: 1/4” through 18” NPS


Buttwelding OutletOutlets: 1/4” through 18” NPS


Finished Hex Nut

Hex Head Bolt

ScrewsLengths dependent upon diameter.Other sizes available on request.

Flat Head Slotted Machine Screw#6 through # 10 and 1/4” through 1/2” ( 3/8” through 2-1/2” Long )

Flat Head Phillips Machine Screw # 8 through # 10 and 5/16” through 1/2” ( 3/8” through 2-1/2” Long )

Pan Head Phillips Machine Screw# 6 through # 10 and 1/4” through 5/16” ( 3/16” through 1-1/2” Long )

Pan Head Slotted Machine Screw# 6 through # 10 and 1/4” through 5/16” ( 3/16” through 1-1/2” Long )

Round Head Slotted Machine Screw# 6 through # 10 and 1/4” ( 1/4” through 1-1/2” Long )

Round Head Phillips Machine Screw# 8 through # 10 and 1/4” ( 3/8” through 1” Long )

Hex Socket Set Screw#6 through # 10 and 1/4” through 1/2” ( 3/8” through 1” Long )

Hex Socket Cap Screw#4 through #10 and 1/4” through 1/2” ( 3/8” through 3” Long )

Flat Washer

Lock Washer

Machining Titanium Short Facts & Tips

As easy to machine as 316 Stainless Steel, depending on (alloy) gradeHas a tendency to seize and gall (as do stainless steels). At elevated temperatures the surface temperature increases and titanium particles will weld to the tool dulling it.• Use Sharp Tools (better to re-sharpen frequently)• Proper Tool Angles• Use heavy feeds (thicker chip to decrease speed and heat build-up)• Low Modulus of Elasticity ( exes more)• Rigid set-up – Rigid machines• Low Thermal Conductivity (lower dissipation of heat)• Signi cant coolant directed as close as possible to point of contact

of the tool• Slow Speeds• Work Hardens less than Stainless Steel (approx. equivalent to 0.20

Carbon Steels)

ToolingAlways check with manufacturer or experienced shop for recommendations depending on the Grade of titanium and Hardness. Both High Speed Tools and Carbide Tools (for higher hardness) have been recommended.

• Turning speeds can range from 150 fpm to approx. 400 fpm depending on the titanium grade (CP or Alloy), the tool material, depth of cut and the feed. Water soluble & Sulphurized cutting oils are widely used

• Milling speeds are generally from 25/30 fpm to as high as (approx.) 150 fpm again, dependent on the grade, tool material, feeds (0.003 to 0.008 in/tooth (ipt) being recommended) and depth of cut.

Drilling• Apply max. force the drill will permit• “Keep Drilling” – Do Not ride in the hole under light

pressure• Engage & Disengage as quickly as possible for deep

hole chip removal• Sulfurized & Chlorinated coolants OR mixtures of

medium grade mineral oil, soluble oil & water have proven satisfactory

Sawing• Power Hacksaw – Coarse pitch

blades 2 to 6 teeth per inch• High blade tension• Heavy Feed & Slow Speed• Generous Coolants

Welding TitaniumWelding titanium has become a very routine operation performed by many thousands of welders in various industries. The Commercially Pure (CP) grades are quite easily welded, easier than stainless and nickel base alloys (NBA), because of their single phase compositions (purity levels of approx. 99.2% to 99.7%). Alloys of titanium are also readily weldable, generally with the same ease (or more so) as stainless and NBA.

Titanium is weldable in all forms: Titanium Inert Gas (TIG) / Gas Tungsten Arc Welding (GTAW)Metal Inert Gas (MIG) / Gas Metal Arc Welding (GMAW)Plasma Arc Welding (PAW)Electron Beam Welding (EBW)Laser Beam Welding (LBW)Resistance Spot/Seam Welding (SPOT)Explosion Welding (Bonding)Submerged Arc Welding (SAW)Diffusion Bonding (DB)Flash Welding (FW)

Circular Sputtering Targets (Pucks) (Ion Beam Sources)Sizes: 24mm to 120mm Dia x lengthCustom sizes available using your drawingMaterials Typical: Ti, Zr, Ti/Al, Ta, SS, Nb, Cu, Cr, Al and others.

Clamp Down Sputtering Targets • Bonded Sputtering TargetsCoating Materials has been supplying clamp down and bonded style sputtering targets for over 15 years in many different shapes and sizes from very thin to thicknesses up to 1.75”, from 2” wide to 13” wide, and from 2” long up to 130” long. Coating Materials bonded targets range from small circular to jumbo size and are bonded to our copper backing plates or other materials used as backing plates.

Custom built sputtering targets manufactured to your drawings can easily be machined using our modern machining facility. Stocking programs are available for your sputtering targets against a blanket type order, with on the shelf targets ready to ship per your required releases.

Coating Materials uses either Indium or Elastomer bonding agents depending on application requirements. Complete inspection documents of bonding integrity can be supplied if requested.

Circular MagnetronsCircular Magnetrons (Pucks) are machined using state of the art computer controlled CNC machinery. Coating Materials supplies Pucks in the following materials: Ti, Zr, Cu, Al, SS, plus alloys of Ti/Al and many other materials supplied on request.

Short Facts & TipsField Welding is very (most) common (Chamber welding is only one welding method) Titanium has an af nity for Oxygen and Nitrogen, especially at higher temperatures Argon (High Purity) gas Shielding is necessary to avoid contamination (most popular for manual welding) Argon (65%) & Helium (35%) mixture is often used for machine weldingUse a trailing shield to keep temperature below 600-800 0F to avoid O

2 & N

2 absorption

Mechanical Properties equal to annealed base metal can be obtained as-welded

Corrosion Resistance as-welded remains the same as the base metal

Joint Preparation is critical: Remove any foreign matter / Use only new clean lean stainless les & wire brushes ( no steel brushes or steel wool )

Remove rough surfaces to avoid crevices which may serve as pockets

Clean area with non-chlorinated solvents - Acetone or Toluene or Methyl Ethyl Keytone

Use clean lint-free cloths or cellulose sponges (avoid cotton gloves, rags, etc.)

Pre-Purging is necessary for closed areas (to eliminate air contamination)

Avoid open windows & doors, where possible

Inspection can be done Visually (color), by Dye-Penetrant, Radiographically & by Hardness

Color indicates degrees of contamination / thickness of the oxide layer. Some color is acceptable but may indicate air intrusion and/or incomplete purge. Examples & approximates degrees:

Base Metal - 30% Elongation Glossy Silver or Light Straw - 20% Elongation

Dark Straw or Purple – 12 % ElongationDark Blue, Dull Yellow, Dull Gray or Powder White < 12% Elongation = No Good

American Welding Society AWS A5.16 “Speci cation for Titanium and Titanium-Alloy Welding Electrodes and Rods”

Tubular Sputtering Targets (C-Mags) Rotatable C-Mag technology has been used in large area coating for manufacturing architectural glass and thin lms since the early 1990’s.The original (McKelvey) patent for a rotatable magnetron sputtering cathode in 1982 used Tico Titanium sputtering tubes.

Types of Cylindrical Magnetron Sputtering TargetsCoating Materials makes all forms of cylindrical magnetron sputtering targets, including those with ends that have been developed over the last few years and has a license to manufacture the QCT (VDS) type end.

Sputtering TubesCoating Material’s sputtering tubes are extruded from large input billets then straightened and nished on the OD and ID. After this process the ends are nish machined per customer request.

Backing TubesBacking tubes are also available. Co-extruded tubes are available due to new co-extrusion technology, which allows the tube to have an inner material that is less expensive than the outer material that is to be sputtered. For instance, Niobium over Titanium or Zirconium over Titanium. Copper over Titanium co-extrusions are also made to better control the straightness of the copper tube.

ExtrusionsExtrusions are offered in sizes of from 2” Diameter up to 8.625” Diameter. in lengths from fractions of an inch up to 160 inches, wall thicknesses from 1/8 inch up to (and plus) 1 inch. Also available in metric sizes.

Linear Magnetrons, (Bolt Down Sputtering Targets)Coating Materials has the ability to produce Planar type targets using the bolt down con guration and clamp down styles.

Planar Sputtering Targets:Materials Typical: Ti, Zr, Ti/Al, SS, Nb, Ta, Cu, Bronze, Al, Ni/Cr, Ni, Ni alloysSizes: Custom made to your drawingsDisks, Delta, Bolt Down, Clamp Down, Bonded, Monolithic, made in most shapes and sizes to 144” long

Tubular Sputtering TargetsExtruded seamless in the following materials: Ti, Zr, Cu, Al, Nb, SS,Ni, Inconel. Co-Extruded seamless in the following combinationsCu/Ti, Nb/Ti/ Zr/Ti. Sizes from 2” Dia to 8.625” Dia x lengths up to160” with ends per your request.

Tico Titanium, Inc., an industry leader in sputtering targets for the large area coating market, announces the creation of a new division, Coating Materials. This division was created to allow the company to increase market awareness and market penetration into the expanding eld of PVD coatings.

Since 1978 Tico has supplied all forms of titanium, niobium, stainless steel, copper, aluminum, zirconium, and chromium sputtering targets as a segment of our core business as a global titanium service center over the past 25 years”.

Sputtering TargetsCoating Materials began producing Planar type sputtering targets in the late 1970’s with Titanium bolt down style targets for the architectural glass industry. Since then Coating Materials has been a world leader in supplying sputtering targets for the same industry and, we are now beginning a new thrust to supply the hard coating industry along with the decorative markets.

Custom ManufacturingCoating Materials is not limited to size or con gurations. Our manufacturing facility is fully implemented with modern CNC

machinery and sizes from very small to jumbo monolithic targets 160 inches long are no problem to produce. We can supply quotations using your drawings. Please send us your requests via any of our contacts.

Available WorldwideCoating Materials has entered into stocking agreements with several companies worldwide to better control the cost of ownership and availability of materials for fast shipments of product. Coating Materials can provide quotations for your sputtering needs via any of the contact information provided.

On-demand ShippingCoating Materials stocks many different sizes and materials on the shelf for fast shipment. Coating Materials can provide a stocking program for your circular magnetrons with on the shelf parts for fast delivery per your releases. Coating Materials will provide quotations for any design needed. Please contact us for a quick quote per your drawings.

We stock many different con gurations of targets made from in-stock materials such as Ti‚ SS‚ Al‚ Nb‚ Zr. for quick shipments.

FabricationQuality Fabricated Products, Expert Welding and Repair Services, vertically integrated to supply products from Ingot to nished fabrication. ASME Code approved Fabrication Certi cates of Authorization for Pressure Vessels and Repairs and/or Alterations (ASME Code Stamps U and R).

Industries We ServiceIndustrial, Chemical Process, Re nery, Petro-Chemical, Oil & Gas, Pulp & Paper, Utility, Food, Heat Exchangers, Transport, Navy & Marine.

Range of productsTanks & Vessels (to 25’ dia.), Filters, Shafting, Piping, Pipe Spools & Segments, Rings, Headers, Nozzles, Flares, Stacks, Ejectors, Standard, Specialty & Custom Fabrications and Prototype Parts.

FacilitiesFacilities include a 43,000 ft2 Service Center & Warehouse in MI and 20,000 ft2 in TX withcombined Water-Jet, Shear, Saw, & Torch Cutting capabilities ,including a shear capable of cutting 7/8” thick x 20 ft plate, plate saw cutting to 10” thick x 8 ft and bar saw cutting to 20” dia.

A separate 20,000 ft2 double bay fabrication facility (also in TX) with lift capacity to 20 tons and forming equipment to include a 50 ton Ironworker, ½” x 10’ Plate Roll,16’ x 180 ton Press Break and Sandblaster along with certi ed GTAW (TIG) and GMAW (MIG) welding processes.

Water Jet Cutting We are able to cut titanium shapes with excellent edge nish and a high degree of intricacy or size tolerance using abrasive Water-Jet cutting systems on tables to 72” x 144”. Custom patterns can be reproduced with the use of a CAD system. Water-Jet cut titanium materials supplied by TICO typically include near-net-shape rings and anges that are nish-machined by the customer. For the fabricator, such near-net shapes offer signi cant advantages over conventional solid square blocks of titanium by dramatically reducing machining time, costs and scrap.

Plate Saw Cutting Our 2 saws allow us to cut to minimum dimensions and up to 10” thick. Our wide throat saw increases our width capacity with length capability to 145” long.

Plate Shears Our large Cincinnati plate shear shown below, the largest dedicated titanium plate shear in the industry, increases our shearing capability to 7/8” thick x 20’. Four (4) additional shears ll the balance of cut size options.

We stock many different confi gurations of targets made

from in-stock materials such as Ti‚ SS‚ Al‚ Nb‚ Zr. for quick shipments.

Bar Saws Our 7 saws allow us to cut bar and billet from 1/4” to 20” diameter or 20” square.

Michigan30150 South Wixom RoadWixom, MI 48393


Texas519 Todd DriveOak Ridge North, TX 77385-7333


ISO 9001:2000BS EN ISO 9001:2000

Tico Services Inside Cover

Fabrication Inside Cover

Forging 2

Sheet & Plate 3

Round Bar & Billet 4

Rod & Wire 5

Tubing 6

Pipe 7

Flanges 8 – 9

Butt Welding Fittings 10 – 12

Fittings & Threads 13 – 15

Fasteners 16 – 17

Chemistry Properties 18

Targets &Coating Materials 19 – 21

63916_Tico (Ti) Brochure

Documents

Transcript of 63916_Tico (Ti) Brochure