6-15 LR
-
Upload
anthony-brown -
Category
Documents
-
view
62 -
download
3
Transcript of 6-15 LR
Anthony Brown
6 Stoney Road
Castle Hayne, NC 28429
(980) 214-6032
______________________________________________________________________________
EDUCATION
Cape Fear Community College, Wilmington, NC May 2009
Certificate, Machining Technology
Cape Fear Community College, Wilmington, NC August 2015
Associate's Degree, Computer Integrated Machining
(In progress)
RELEVANT COURSEWORK
Learned to manually program parts on CNC mill and lathe
Trained in drawing models in Solidworks
Skilled in drawing and programming parts in Mastercam
EXPERIENCE
Interrol l
Wilmington, NC Continuous Improvement Associate
2014-Present
Participate and help facilitate Kaizen events
Facilitate Mini-Kaizens which involves focusing on one particular opportunity for
improvement within one segment
Gather information for special projects and upcoming Kaizen events
Provide segments with 5S concerns and help with ways to improve
Perform 5S audits throughout the plant
Provide fixtures and work stations for segments to improve flow and productivity
within the segments
Perform Chalk Circles through Lean Manufacturing System
Ensure sustaining improvements and changes from Kaizen events,
Perform Kaizen post audits,
Assist others with continuous improvements tasks
Monitor and post Overall Equipment Efficiency
Perform 5S audits
Heraeus Wilmington, NC
CNC Machine Operator 2013-2014
Set-up CNC machines by inputting correct program for part being machined
Gathered stock for job to be performed
Set-up fixture for operation to be performed
Operated CNC machines
Loaded parts and made sure parts were within tolerances
Operated manual lathes
Operated Center-less grinders
Grinded rods to meet specifications dressed grinding wheel and changed blades
on grinder
Interpreted and edited programs as required
QRP, Inc. Leland, NC
CNC Machine Operator 2012-2013
Operated CNC Swiss turning machines
Select next job from computer and set-up traveler
Load and edit programs on to machines
Set-up machine for required job per traveler
Machine first part and do first part inspection (Make adjustments if needed, so part were
within tolerances per traveler or print)
Use micrometers, comparator, calipers, depth micrometers, indicators, and height gauges to
inspect parts